* [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
@ 2020-11-17 22:08 Krzysztof Kozlowski
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
` (4 more replies)
0 siblings, 5 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2020-11-17 22:08 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet,
linux-hwmon, devicetree, linux-kernel, linux-doc
Cc: Linus Walleij, Kun Yi, Krzysztof Kozlowski
Convert the TI INA2xx bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/hwmon/ina2xx.txt | 24 --------
.../devicetree/bindings/hwmon/ti,ina2xx.yaml | 55 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 56 insertions(+), 25 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/ina2xx.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
deleted file mode 100644
index 02af0d94e921..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ina2xx properties
-
-Required properties:
-- compatible: Must be one of the following:
- - "ti,ina209" for ina209
- - "ti,ina219" for ina219
- - "ti,ina220" for ina220
- - "ti,ina226" for ina226
- - "ti,ina230" for ina230
- - "ti,ina231" for ina231
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor
- Shunt resistor value in micro-Ohm
-
-Example:
-
-ina220@44 {
- compatible = "ti,ina220";
- reg = <0x44>;
- shunt-resistor = <1000>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
new file mode 100644
index 000000000000..6f0443322a36
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments INA209 family of power/voltage monitors
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The INA209 is a high-side current shunt and power monitor with
+ an I2C interface.
+
+ Datasheets:
+ https://www.ti.com/product/INA209
+
+properties:
+ compatible:
+ enum:
+ - ti,ina209
+ - ti,ina219
+ - ti,ina220
+ - ti,ina226
+ - ti,ina230
+ - ti,ina231
+
+ reg:
+ maxItems: 1
+
+ shunt-resistor:
+ description:
+ Shunt resistor value in micro-Ohm.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-sensor@44 {
+ compatible = "ti,ina220";
+ reg = <0x44>;
+ shunt-resistor = <1000>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0818a5b03832..e9ba2e555679 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8669,7 +8669,7 @@ INA209 HARDWARE MONITOR DRIVER
M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/hwmon/ina2xx.txt
+F: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
F: Documentation/hwmon/ina209.rst
F: drivers/hwmon/ina209.c
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
@ 2020-11-17 22:08 ` Krzysztof Kozlowski
2020-12-07 21:10 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
2020-11-17 22:08 ` [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 " Krzysztof Kozlowski
` (3 subsequent siblings)
4 siblings, 2 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2020-11-17 22:08 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet,
linux-hwmon, devicetree, linux-kernel, linux-doc
Cc: Linus Walleij, Kun Yi, Krzysztof Kozlowski
Convert the Analog Devices AD741x bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/hwmon/ad741x.txt | 15 -------
.../devicetree/bindings/hwmon/adi,ad741x.yaml | 39 +++++++++++++++++++
2 files changed, 39 insertions(+), 15 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/ad741x.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/ad741x.txt b/Documentation/devicetree/bindings/hwmon/ad741x.txt
deleted file mode 100644
index 9102152c8410..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ad741x.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings
-
-Required properties:
-- compatible: one of
- "adi,ad7416"
- "adi,ad7417"
- "adi,ad7418"
-- reg: I2C address
-
-Example:
-
-hwmon@28 {
- compatible = "adi,ad7418";
- reg = <0x28>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
new file mode 100644
index 000000000000..ce7f8ce9da0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7416/AD7417/AD7418 temperature sensors
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7416
+ - adi,ad7417
+ - adi,ad7418
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ temperature-sensor@28 {
+ compatible = "adi,ad7418";
+ reg = <0x28>;
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
@ 2020-11-17 22:08 ` Krzysztof Kozlowski
2020-12-07 21:11 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
2020-11-17 22:08 ` [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 " Krzysztof Kozlowski
` (2 subsequent siblings)
4 siblings, 2 replies; 14+ messages in thread
From: Krzysztof Kozlowski @ 2020-11-17 22:08 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet,
linux-hwmon, devicetree, linux-kernel, linux-doc
Cc: Linus Walleij, Kun Yi, Krzysztof Kozlowski
Convert the TI ADS7828 bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../devicetree/bindings/hwmon/ads7828.txt | 25 --------
.../devicetree/bindings/hwmon/ti,ads7828.yaml | 57 +++++++++++++++++++
.../devicetree/bindings/trivial-devices.yaml | 4 --
3 files changed, 57 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/hwmon/ads7828.txt
create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt
deleted file mode 100644
index fe0cc4ad7ea9..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ads7828.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-ads7828 properties
-
-Required properties:
-- compatible: Should be one of
- ti,ads7828
- ti,ads7830
-- reg: I2C address
-
-Optional properties:
-
-- ti,differential-input
- Set to use the device in differential mode.
-- vref-supply
- The external reference on the device is set to this regulators output. If it
- does not exists the internal reference will be used and output by the ads78xx
- on the "external vref" pin.
-
- Example ADS7828 node:
-
- ads7828: ads@48 {
- comatible = "ti,ads7828";
- reg = <0x48>;
- vref-supply = <&vref>;
- ti,differential-input;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
new file mode 100644
index 000000000000..33ee575bb09d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC)
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC)
+ with an I2C interface.
+
+ Datasheets:
+ https://www.ti.com/product/ADS7828
+
+properties:
+ compatible:
+ enum:
+ - ti,ads7828
+ - ti,ads7830
+
+ reg:
+ maxItems: 1
+
+ ti,differential-input:
+ description:
+ Set to use the device in differential mode.
+ type: boolean
+
+ vref-supply:
+ description:
+ The regulator to use as an external reference. If it does not exists the
+ internal reference will be used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@48 {
+ comatible = "ti,ads7828";
+ reg = <0x48>;
+ vref-supply = <&vref>;
+ ti,differential-input;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index ab623ba930d5..1b1fa0424539 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -350,10 +350,6 @@ properties:
- st,24c256
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- taos,tsl2550
- # 8-Channels, 12-bit ADC
- - ti,ads7828
- # 8-Channels, 8-bit ADC
- - ti,ads7830
# Temperature Monitoring and Fan Control
- ti,amc6821
# Temperature sensor with 2-wire interface
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
2020-11-17 22:08 ` [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 " Krzysztof Kozlowski
@ 2020-11-17 22:08 ` Krzysztof Kozlowski
2020-12-07 21:12 ` Rob Herring
2020-12-07 21:10 ` [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx " Rob Herring
2020-12-08 0:15 ` Guenter Roeck
4 siblings, 1 reply; 14+ messages in thread
From: Krzysztof Kozlowski @ 2020-11-17 22:08 UTC (permalink / raw)
To: Jean Delvare, Guenter Roeck, Rob Herring, Jonathan Corbet,
linux-hwmon, devicetree, linux-kernel, linux-doc
Cc: Linus Walleij, Kun Yi, Krzysztof Kozlowski
Convert the Analog Devices ADM1275 bindings to dt-schema.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
.../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
.../devicetree/bindings/hwmon/adm1275.txt | 25 --------
Documentation/hwmon/adm1275.rst | 2 +-
3 files changed, 59 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
new file mode 100644
index 000000000000..2cad28c499dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+ that offer digital current, voltage, and power monitoring using an on-chip,
+ 12-bit analog-to-digital converter (ADC), communicated through a PMBus
+ compliant I2C interface.
+
+ Datasheets:
+ https://www.analog.com/en/products/adm1294.html
+
+properties:
+ compatible:
+ enum:
+ - adi,adm1075
+ - adi,adm1272
+ - adi,adm1275
+ - adi,adm1276
+ - adi,adm1278
+ - adi,adm1293
+ - adi,adm1294
+
+ reg:
+ maxItems: 1
+
+ shunt-resistor-micro-ohms:
+ description:
+ Shunt resistor value in micro-Ohm.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-sensor@10 {
+ compatible = "adi,adm1272";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
deleted file mode 100644
index 1ecd03f3da4d..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-adm1275 properties
-
-Required properties:
-- compatible: Must be one of the supported compatible strings:
- - "adi,adm1075" for adm1075
- - "adi,adm1272" for adm1272
- - "adi,adm1275" for adm1275
- - "adi,adm1276" for adm1276
- - "adi,adm1278" for adm1278
- - "adi,adm1293" for adm1293
- - "adi,adm1294" for adm1294
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor-micro-ohms
- Shunt resistor value in micro-Ohm
-
-Example:
-
-adm1272@10 {
- compatible = "adi,adm1272";
- reg = <0x10>;
- shunt-resistor-micro-ohms = <500>;
-};
diff --git a/Documentation/hwmon/adm1275.rst b/Documentation/hwmon/adm1275.rst
index ce6528f90e4a..804590eeabdc 100644
--- a/Documentation/hwmon/adm1275.rst
+++ b/Documentation/hwmon/adm1275.rst
@@ -83,7 +83,7 @@ or current scaling. Reported voltages, currents, and power are raw measurements,
and will typically have to be scaled.
The shunt value in micro-ohms can be set via device tree at compile-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
if the device tree is used.
Platform data support
--
2.25.1
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
` (2 preceding siblings ...)
2020-11-17 22:08 ` [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 " Krzysztof Kozlowski
@ 2020-12-07 21:10 ` Rob Herring
2020-12-08 0:15 ` Guenter Roeck
4 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-12-07 21:10 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, Linus Walleij, linux-kernel, linux-hwmon, linux-doc,
Jonathan Corbet, Rob Herring, Jean Delvare, Kun Yi,
Guenter Roeck
On Tue, 17 Nov 2020 23:08:04 +0100, Krzysztof Kozlowski wrote:
> Convert the TI INA2xx bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../devicetree/bindings/hwmon/ina2xx.txt | 24 --------
> .../devicetree/bindings/hwmon/ti,ina2xx.yaml | 55 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 56 insertions(+), 25 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ina2xx.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
@ 2020-12-07 21:10 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
1 sibling, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-12-07 21:10 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, Jean Delvare, linux-hwmon, Linus Walleij,
linux-kernel, Guenter Roeck, linux-doc, Rob Herring, Kun Yi,
Jonathan Corbet
On Tue, 17 Nov 2020 23:08:05 +0100, Krzysztof Kozlowski wrote:
> Convert the Analog Devices AD741x bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../devicetree/bindings/hwmon/ad741x.txt | 15 -------
> .../devicetree/bindings/hwmon/adi,ad741x.yaml | 39 +++++++++++++++++++
> 2 files changed, 39 insertions(+), 15 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ad741x.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
2020-11-17 22:08 ` [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 " Krzysztof Kozlowski
@ 2020-12-07 21:11 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
1 sibling, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-12-07 21:11 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-hwmon, Guenter Roeck, devicetree, Kun Yi, Jonathan Corbet,
linux-kernel, Jean Delvare, linux-doc, Rob Herring,
Linus Walleij
On Tue, 17 Nov 2020 23:08:06 +0100, Krzysztof Kozlowski wrote:
> Convert the TI ADS7828 bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../devicetree/bindings/hwmon/ads7828.txt | 25 --------
> .../devicetree/bindings/hwmon/ti,ads7828.yaml | 57 +++++++++++++++++++
> .../devicetree/bindings/trivial-devices.yaml | 4 --
> 3 files changed, 57 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ads7828.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
2020-11-17 22:08 ` [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 " Krzysztof Kozlowski
@ 2020-12-07 21:12 ` Rob Herring
2020-12-08 0:19 ` Guenter Roeck
0 siblings, 1 reply; 14+ messages in thread
From: Rob Herring @ 2020-12-07 21:12 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Jean Delvare, Guenter Roeck, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Tue, Nov 17, 2020 at 11:08:07PM +0100, Krzysztof Kozlowski wrote:
> Convert the Analog Devices ADM1275 bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> .../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
> .../devicetree/bindings/hwmon/adm1275.txt | 25 --------
> Documentation/hwmon/adm1275.rst | 2 +-
> 3 files changed, 59 insertions(+), 26 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> new file mode 100644
> index 000000000000..2cad28c499dc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> @@ -0,0 +1,58 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +description: |
> + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
> + that offer digital current, voltage, and power monitoring using an on-chip,
> + 12-bit analog-to-digital converter (ADC), communicated through a PMBus
> + compliant I2C interface.
> +
> + Datasheets:
> + https://www.analog.com/en/products/adm1294.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adm1075
> + - adi,adm1272
> + - adi,adm1275
> + - adi,adm1276
> + - adi,adm1278
> + - adi,adm1293
> + - adi,adm1294
> +
> + reg:
> + maxItems: 1
> +
> + shunt-resistor-micro-ohms:
> + description:
> + Shunt resistor value in micro-Ohm.
> + $ref: /schemas/types.yaml#/definitions/uint32
Don't need a type if you have units. With that dropped,
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
` (3 preceding siblings ...)
2020-12-07 21:10 ` [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx " Rob Herring
@ 2020-12-08 0:15 ` Guenter Roeck
4 siblings, 0 replies; 14+ messages in thread
From: Guenter Roeck @ 2020-12-08 0:15 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Jean Delvare, Rob Herring, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Tue, Nov 17, 2020 at 11:08:04PM +0100, Krzysztof Kozlowski wrote:
> Convert the TI INA2xx bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ina2xx.txt | 24 --------
> .../devicetree/bindings/hwmon/ti,ina2xx.yaml | 55 +++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 56 insertions(+), 25 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ina2xx.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ina2xx.txt b/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> deleted file mode 100644
> index 02af0d94e921..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/ina2xx.txt
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -ina2xx properties
> -
> -Required properties:
> -- compatible: Must be one of the following:
> - - "ti,ina209" for ina209
> - - "ti,ina219" for ina219
> - - "ti,ina220" for ina220
> - - "ti,ina226" for ina226
> - - "ti,ina230" for ina230
> - - "ti,ina231" for ina231
> -- reg: I2C address
> -
> -Optional properties:
> -
> -- shunt-resistor
> - Shunt resistor value in micro-Ohm
> -
> -Example:
> -
> -ina220@44 {
> - compatible = "ti,ina220";
> - reg = <0x44>;
> - shunt-resistor = <1000>;
> -};
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> new file mode 100644
> index 000000000000..6f0443322a36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> @@ -0,0 +1,55 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments INA209 family of power/voltage monitors
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +description: |
> + The INA209 is a high-side current shunt and power monitor with
> + an I2C interface.
> +
> + Datasheets:
> + https://www.ti.com/product/INA209
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ina209
> + - ti,ina219
> + - ti,ina220
> + - ti,ina226
> + - ti,ina230
> + - ti,ina231
> +
> + reg:
> + maxItems: 1
> +
> + shunt-resistor:
> + description:
> + Shunt resistor value in micro-Ohm.
> + $ref: /schemas/types.yaml#/definitions/uint32
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-sensor@44 {
> + compatible = "ti,ina220";
> + reg = <0x44>;
> + shunt-resistor = <1000>;
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0818a5b03832..e9ba2e555679 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8669,7 +8669,7 @@ INA209 HARDWARE MONITOR DRIVER
> M: Guenter Roeck <linux@roeck-us.net>
> L: linux-hwmon@vger.kernel.org
> S: Maintained
> -F: Documentation/devicetree/bindings/hwmon/ina2xx.txt
> +F: Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
> F: Documentation/hwmon/ina209.rst
> F: drivers/hwmon/ina209.c
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
2020-12-07 21:10 ` Rob Herring
@ 2020-12-08 0:16 ` Guenter Roeck
1 sibling, 0 replies; 14+ messages in thread
From: Guenter Roeck @ 2020-12-08 0:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Jean Delvare, Rob Herring, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Tue, Nov 17, 2020 at 11:08:05PM +0100, Krzysztof Kozlowski wrote:
> Convert the Analog Devices AD741x bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ad741x.txt | 15 -------
> .../devicetree/bindings/hwmon/adi,ad741x.yaml | 39 +++++++++++++++++++
> 2 files changed, 39 insertions(+), 15 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ad741x.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ad741x.txt b/Documentation/devicetree/bindings/hwmon/ad741x.txt
> deleted file mode 100644
> index 9102152c8410..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/ad741x.txt
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings
> -
> -Required properties:
> -- compatible: one of
> - "adi,ad7416"
> - "adi,ad7417"
> - "adi,ad7418"
> -- reg: I2C address
> -
> -Example:
> -
> -hwmon@28 {
> - compatible = "adi,ad7418";
> - reg = <0x28>;
> -};
> diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
> new file mode 100644
> index 000000000000..ce7f8ce9da0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
> @@ -0,0 +1,39 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7416/AD7417/AD7418 temperature sensors
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +properties:
> + compatible:
> + enum:
> + - adi,ad7416
> + - adi,ad7417
> + - adi,ad7418
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + temperature-sensor@28 {
> + compatible = "adi,ad7418";
> + reg = <0x28>;
> + };
> + };
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
2020-11-17 22:08 ` [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 " Krzysztof Kozlowski
2020-12-07 21:11 ` Rob Herring
@ 2020-12-08 0:16 ` Guenter Roeck
1 sibling, 0 replies; 14+ messages in thread
From: Guenter Roeck @ 2020-12-08 0:16 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Jean Delvare, Rob Herring, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Tue, Nov 17, 2020 at 11:08:06PM +0100, Krzysztof Kozlowski wrote:
> Convert the TI ADS7828 bindings to dt-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
Applied.
Thanks,
Guenter
> ---
> .../devicetree/bindings/hwmon/ads7828.txt | 25 --------
> .../devicetree/bindings/hwmon/ti,ads7828.yaml | 57 +++++++++++++++++++
> .../devicetree/bindings/trivial-devices.yaml | 4 --
> 3 files changed, 57 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/hwmon/ads7828.txt
> create mode 100644 Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
>
> diff --git a/Documentation/devicetree/bindings/hwmon/ads7828.txt b/Documentation/devicetree/bindings/hwmon/ads7828.txt
> deleted file mode 100644
> index fe0cc4ad7ea9..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/ads7828.txt
> +++ /dev/null
> @@ -1,25 +0,0 @@
> -ads7828 properties
> -
> -Required properties:
> -- compatible: Should be one of
> - ti,ads7828
> - ti,ads7830
> -- reg: I2C address
> -
> -Optional properties:
> -
> -- ti,differential-input
> - Set to use the device in differential mode.
> -- vref-supply
> - The external reference on the device is set to this regulators output. If it
> - does not exists the internal reference will be used and output by the ads78xx
> - on the "external vref" pin.
> -
> - Example ADS7828 node:
> -
> - ads7828: ads@48 {
> - comatible = "ti,ads7828";
> - reg = <0x48>;
> - vref-supply = <&vref>;
> - ti,differential-input;
> - };
> diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
> new file mode 100644
> index 000000000000..33ee575bb09d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
> @@ -0,0 +1,57 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +
> +$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@kernel.org>
> +
> +description: |
> + The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC)
> + with an I2C interface.
> +
> + Datasheets:
> + https://www.ti.com/product/ADS7828
> +
> +properties:
> + compatible:
> + enum:
> + - ti,ads7828
> + - ti,ads7830
> +
> + reg:
> + maxItems: 1
> +
> + ti,differential-input:
> + description:
> + Set to use the device in differential mode.
> + type: boolean
> +
> + vref-supply:
> + description:
> + The regulator to use as an external reference. If it does not exists the
> + internal reference will be used.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + adc@48 {
> + comatible = "ti,ads7828";
> + reg = <0x48>;
> + vref-supply = <&vref>;
> + ti,differential-input;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index ab623ba930d5..1b1fa0424539 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -350,10 +350,6 @@ properties:
> - st,24c256
> # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
> - taos,tsl2550
> - # 8-Channels, 12-bit ADC
> - - ti,ads7828
> - # 8-Channels, 8-bit ADC
> - - ti,ads7830
> # Temperature Monitoring and Fan Control
> - ti,amc6821
> # Temperature sensor with 2-wire interface
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
2020-12-07 21:12 ` Rob Herring
@ 2020-12-08 0:19 ` Guenter Roeck
2020-12-08 8:13 ` Krzysztof Kozlowski
0 siblings, 1 reply; 14+ messages in thread
From: Guenter Roeck @ 2020-12-08 0:19 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, Jean Delvare, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Mon, Dec 07, 2020 at 03:12:59PM -0600, Rob Herring wrote:
> On Tue, Nov 17, 2020 at 11:08:07PM +0100, Krzysztof Kozlowski wrote:
> > Convert the Analog Devices ADM1275 bindings to dt-schema.
> >
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > ---
> > .../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
> > .../devicetree/bindings/hwmon/adm1275.txt | 25 --------
> > Documentation/hwmon/adm1275.rst | 2 +-
> > 3 files changed, 59 insertions(+), 26 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > new file mode 100644
> > index 000000000000..2cad28c499dc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > @@ -0,0 +1,58 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +
> > +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
> > +
> > +maintainers:
> > + - Krzysztof Kozlowski <krzk@kernel.org>
> > +
> > +description: |
> > + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
> > + that offer digital current, voltage, and power monitoring using an on-chip,
> > + 12-bit analog-to-digital converter (ADC), communicated through a PMBus
> > + compliant I2C interface.
> > +
> > + Datasheets:
> > + https://www.analog.com/en/products/adm1294.html
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - adi,adm1075
> > + - adi,adm1272
> > + - adi,adm1275
> > + - adi,adm1276
> > + - adi,adm1278
> > + - adi,adm1293
> > + - adi,adm1294
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + shunt-resistor-micro-ohms:
> > + description:
> > + Shunt resistor value in micro-Ohm.
> > + $ref: /schemas/types.yaml#/definitions/uint32
>
> Don't need a type if you have units. With that dropped,
>
Sorry, I am not familiar with the terminology. Does that refer to
the '$ref' line ?
Thanks,
Guenter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
2020-12-08 0:19 ` Guenter Roeck
@ 2020-12-08 8:13 ` Krzysztof Kozlowski
2020-12-08 14:15 ` Guenter Roeck
0 siblings, 1 reply; 14+ messages in thread
From: Krzysztof Kozlowski @ 2020-12-08 8:13 UTC (permalink / raw)
To: Guenter Roeck
Cc: Rob Herring, Jean Delvare, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On Mon, Dec 07, 2020 at 04:19:16PM -0800, Guenter Roeck wrote:
> On Mon, Dec 07, 2020 at 03:12:59PM -0600, Rob Herring wrote:
> > On Tue, Nov 17, 2020 at 11:08:07PM +0100, Krzysztof Kozlowski wrote:
> > > Convert the Analog Devices ADM1275 bindings to dt-schema.
> > >
> > > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > > ---
> > > .../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
> > > .../devicetree/bindings/hwmon/adm1275.txt | 25 --------
> > > Documentation/hwmon/adm1275.rst | 2 +-
> > > 3 files changed, 59 insertions(+), 26 deletions(-)
> > > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > > delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > > new file mode 100644
> > > index 000000000000..2cad28c499dc
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
> > > @@ -0,0 +1,58 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +
> > > +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
> > > +
> > > +maintainers:
> > > + - Krzysztof Kozlowski <krzk@kernel.org>
> > > +
> > > +description: |
> > > + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
> > > + that offer digital current, voltage, and power monitoring using an on-chip,
> > > + 12-bit analog-to-digital converter (ADC), communicated through a PMBus
> > > + compliant I2C interface.
> > > +
> > > + Datasheets:
> > > + https://www.analog.com/en/products/adm1294.html
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - adi,adm1075
> > > + - adi,adm1272
> > > + - adi,adm1275
> > > + - adi,adm1276
> > > + - adi,adm1278
> > > + - adi,adm1293
> > > + - adi,adm1294
> > > +
> > > + reg:
> > > + maxItems: 1
> > > +
> > > + shunt-resistor-micro-ohms:
> > > + description:
> > > + Shunt resistor value in micro-Ohm.
> > > + $ref: /schemas/types.yaml#/definitions/uint32
> >
> > Don't need a type if you have units. With that dropped,
> >
>
> Sorry, I am not familiar with the terminology. Does that refer to
> the '$ref' line ?
Yes, it's the $ref line which can be safely removed. The core dt-schema
applies such $ref if the property name ends with '-micro-ohms'.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
2020-12-08 8:13 ` Krzysztof Kozlowski
@ 2020-12-08 14:15 ` Guenter Roeck
0 siblings, 0 replies; 14+ messages in thread
From: Guenter Roeck @ 2020-12-08 14:15 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Jean Delvare, Jonathan Corbet, linux-hwmon,
devicetree, linux-kernel, linux-doc, Linus Walleij, Kun Yi
On 12/8/20 12:13 AM, Krzysztof Kozlowski wrote:
> On Mon, Dec 07, 2020 at 04:19:16PM -0800, Guenter Roeck wrote:
>> On Mon, Dec 07, 2020 at 03:12:59PM -0600, Rob Herring wrote:
>>> On Tue, Nov 17, 2020 at 11:08:07PM +0100, Krzysztof Kozlowski wrote:
>>>> Convert the Analog Devices ADM1275 bindings to dt-schema.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>>>> ---
>>>> .../bindings/hwmon/adi,adm1275.yaml | 58 +++++++++++++++++++
>>>> .../devicetree/bindings/hwmon/adm1275.txt | 25 --------
>>>> Documentation/hwmon/adm1275.rst | 2 +-
>>>> 3 files changed, 59 insertions(+), 26 deletions(-)
>>>> create mode 100644 Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
>>>> delete mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
>>>> new file mode 100644
>>>> index 000000000000..2cad28c499dc
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
>>>> @@ -0,0 +1,58 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +
>>>> +$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
>>>> +
>>>> +maintainers:
>>>> + - Krzysztof Kozlowski <krzk@kernel.org>
>>>> +
>>>> +description: |
>>>> + The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
>>>> + that offer digital current, voltage, and power monitoring using an on-chip,
>>>> + 12-bit analog-to-digital converter (ADC), communicated through a PMBus
>>>> + compliant I2C interface.
>>>> +
>>>> + Datasheets:
>>>> + https://www.analog.com/en/products/adm1294.html
>>>> +
>>>> +properties:
>>>> + compatible:
>>>> + enum:
>>>> + - adi,adm1075
>>>> + - adi,adm1272
>>>> + - adi,adm1275
>>>> + - adi,adm1276
>>>> + - adi,adm1278
>>>> + - adi,adm1293
>>>> + - adi,adm1294
>>>> +
>>>> + reg:
>>>> + maxItems: 1
>>>> +
>>>> + shunt-resistor-micro-ohms:
>>>> + description:
>>>> + Shunt resistor value in micro-Ohm.
>>>> + $ref: /schemas/types.yaml#/definitions/uint32
>>>
>>> Don't need a type if you have units. With that dropped,
>>>
>>
>> Sorry, I am not familiar with the terminology. Does that refer to
>> the '$ref' line ?
>
> Yes, it's the $ref line which can be safely removed. The core dt-schema
> applies such $ref if the property name ends with '-micro-ohms'.
>
Thanks a lot for the information. Ill apply the patch with this line removed.
Thanks,
Guenter
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-12-08 14:16 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-17 22:08 [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema Krzysztof Kozlowski
2020-11-17 22:08 ` [PATCH 2/4] dt-bindings: hwmon: convert AD AD741x " Krzysztof Kozlowski
2020-12-07 21:10 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
2020-11-17 22:08 ` [PATCH 3/4] dt-bindings: hwmon: convert TI ADS7828 " Krzysztof Kozlowski
2020-12-07 21:11 ` Rob Herring
2020-12-08 0:16 ` Guenter Roeck
2020-11-17 22:08 ` [PATCH 4/4] dt-bindings: hwmon: convert AD ADM1275 " Krzysztof Kozlowski
2020-12-07 21:12 ` Rob Herring
2020-12-08 0:19 ` Guenter Roeck
2020-12-08 8:13 ` Krzysztof Kozlowski
2020-12-08 14:15 ` Guenter Roeck
2020-12-07 21:10 ` [PATCH 1/4] dt-bindings: hwmon: convert TI INA2xx " Rob Herring
2020-12-08 0:15 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).