* [PATCH] mfd: kempld-core: Add support for additional devices
@ 2020-11-17 9:31 Michael Brunner
2020-11-23 15:53 ` [PATCH v2] " Michael Brunner
0 siblings, 1 reply; 4+ messages in thread
From: Michael Brunner @ 2020-11-17 9:31 UTC (permalink / raw)
To: lee.jones; +Cc: linux, mibru, vkrasnov, linux-kernel
This update includes DMI IDs for the following Kontron modules and
systems:
COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203
Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
kempld devices.
Instead of also adding the newly supported devices to the Kconfig
description this patch removes the lengthy list. With future usage of
the ACPI HIDs it will not be necessary to explicitly add support for
each individual device to the driver and therefore the list would
become incomplete anyway.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
---
drivers/mfd/Kconfig | 30 ++--------------
drivers/mfd/kempld-core.c | 76 +++++++++++++++++++++++++++++++++++++--
2 files changed, 77 insertions(+), 29 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b99a13669bf..befd19da8562 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -720,33 +720,9 @@ config MFD_KEMPLD
select MFD_CORE
help
This is the core driver for the PLD (Programmable Logic Device) found
- on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
- device may provide functions like watchdog, GPIO, UART and I2C bus.
-
- The following modules are supported:
- * COMe-bBD#
- * COMe-bBL6
- * COMe-bHL6
- * COMe-bSL6
- * COMe-bIP#
- * COMe-bKL6
- * COMe-bPC2 (ETXexpress-PC)
- * COMe-bSC# (ETXexpress-SC T#)
- * COMe-cAL6
- * COMe-cBL6
- * COMe-cBT6
- * COMe-cBW6
- * COMe-cCT6
- * COMe-cDC2 (microETXexpress-DC)
- * COMe-cHL6
- * COMe-cKL6
- * COMe-cPC2 (microETXexpress-PC)
- * COMe-cSL6
- * COMe-mAL10
- * COMe-mBT10
- * COMe-mCT10
- * COMe-mTT10 (nanoETXexpress-TT)
- * ETX-OH
+ on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as
+ well as on some other Kontron products. The PLD device may provide
+ functions like watchdog, GPIO, UART and I2C bus.
This driver can also be built as a module. If so, the module
will be called kempld-core.
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index ecd26271b9a4..4ea0ecd45324 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -552,6 +552,7 @@ static int kempld_remove(struct platform_device *pdev)
#ifdef CONFIG_ACPI
static const struct acpi_device_id kempld_acpi_table[] = {
+ { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
{}
};
@@ -584,6 +585,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "BDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "BHL6",
.matches = {
@@ -648,6 +657,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "CDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "CHL6",
.matches = {
@@ -767,6 +784,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "KBOXA203",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "M4A1",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MAL1",
.matches = {
@@ -775,6 +808,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "MITXAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MBR1",
.matches = {
@@ -823,6 +864,30 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "PITXAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "UNP1",
.matches = {
@@ -863,8 +928,7 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
- },
- {
+ }, {
.ident = "UTH6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -872,6 +936,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "Q7AL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
},
{}
};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2] mfd: kempld-core: Add support for additional devices
2020-11-17 9:31 [PATCH] mfd: kempld-core: Add support for additional devices Michael Brunner
@ 2020-11-23 15:53 ` Michael Brunner
2020-11-26 2:06 ` Guenter Roeck
2020-12-02 12:53 ` Lee Jones
0 siblings, 2 replies; 4+ messages in thread
From: Michael Brunner @ 2020-11-23 15:53 UTC (permalink / raw)
To: lee.jones; +Cc: linux, mibru, vkrasnov, linux-kernel
This update includes DMI IDs for the following Kontron modules and
systems:
COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203
Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
kempld devices.
Instead of also adding the newly supported devices to the Kconfig
description this patch removes the lengthy list. With future usage of
the ACPI HIDs it will not be necessary to explicitly add support for
each individual device to the driver and therefore the list would
become incomplete anyway.
Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
---
v2: Corrected a board name, only use 4 digits for IDs
drivers/mfd/Kconfig | 30 ++--------------
drivers/mfd/kempld-core.c | 76 +++++++++++++++++++++++++++++++++++++--
2 files changed, 77 insertions(+), 29 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8b99a13669bf..befd19da8562 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -720,33 +720,9 @@ config MFD_KEMPLD
select MFD_CORE
help
This is the core driver for the PLD (Programmable Logic Device) found
- on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
- device may provide functions like watchdog, GPIO, UART and I2C bus.
-
- The following modules are supported:
- * COMe-bBD#
- * COMe-bBL6
- * COMe-bHL6
- * COMe-bSL6
- * COMe-bIP#
- * COMe-bKL6
- * COMe-bPC2 (ETXexpress-PC)
- * COMe-bSC# (ETXexpress-SC T#)
- * COMe-cAL6
- * COMe-cBL6
- * COMe-cBT6
- * COMe-cBW6
- * COMe-cCT6
- * COMe-cDC2 (microETXexpress-DC)
- * COMe-cHL6
- * COMe-cKL6
- * COMe-cPC2 (microETXexpress-PC)
- * COMe-cSL6
- * COMe-mAL10
- * COMe-mBT10
- * COMe-mCT10
- * COMe-mTT10 (nanoETXexpress-TT)
- * ETX-OH
+ on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as
+ well as on some other Kontron products. The PLD device may provide
+ functions like watchdog, GPIO, UART and I2C bus.
This driver can also be built as a module. If so, the module
will be called kempld-core.
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index ecd26271b9a4..9166075c1f32 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -552,6 +552,7 @@ static int kempld_remove(struct platform_device *pdev)
#ifdef CONFIG_ACPI
static const struct acpi_device_id kempld_acpi_table[] = {
+ { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
{}
};
@@ -584,6 +585,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "BDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "BHL6",
.matches = {
@@ -648,6 +657,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "CDV7",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "CHL6",
.matches = {
@@ -767,6 +784,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "A203",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "M4A1",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MAL1",
.matches = {
@@ -775,6 +808,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "MAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "MBR1",
.matches = {
@@ -823,6 +864,30 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "PAPL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
+ }, {
+ .ident = "SXAL4",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
}, {
.ident = "UNP1",
.matches = {
@@ -863,8 +928,7 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
- },
- {
+ }, {
.ident = "UTH6",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -872,6 +936,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
},
.driver_data = (void *)&kempld_platform_data_generic,
.callback = kempld_create_platform_device,
+ }, {
+ .ident = "Q7AL",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+ DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
+ },
+ .driver_data = (void *)&kempld_platform_data_generic,
+ .callback = kempld_create_platform_device,
},
{}
};
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] mfd: kempld-core: Add support for additional devices
2020-11-23 15:53 ` [PATCH v2] " Michael Brunner
@ 2020-11-26 2:06 ` Guenter Roeck
2020-12-02 12:53 ` Lee Jones
1 sibling, 0 replies; 4+ messages in thread
From: Guenter Roeck @ 2020-11-26 2:06 UTC (permalink / raw)
To: Michael Brunner; +Cc: lee.jones, mibru, vkrasnov, linux-kernel
On Mon, Nov 23, 2020 at 03:53:27PM +0000, Michael Brunner wrote:
> This update includes DMI IDs for the following Kontron modules and
> systems:
> COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
> Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203
>
> Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
> kempld devices.
>
> Instead of also adding the newly supported devices to the Kconfig
> description this patch removes the lengthy list. With future usage of
> the ACPI HIDs it will not be necessary to explicitly add support for
> each individual device to the driver and therefore the list would
> become incomplete anyway.
>
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
>
> v2: Corrected a board name, only use 4 digits for IDs
>
> drivers/mfd/Kconfig | 30 ++--------------
> drivers/mfd/kempld-core.c | 76 +++++++++++++++++++++++++++++++++++++--
> 2 files changed, 77 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 8b99a13669bf..befd19da8562 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -720,33 +720,9 @@ config MFD_KEMPLD
> select MFD_CORE
> help
> This is the core driver for the PLD (Programmable Logic Device) found
> - on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
> - device may provide functions like watchdog, GPIO, UART and I2C bus.
> -
> - The following modules are supported:
> - * COMe-bBD#
> - * COMe-bBL6
> - * COMe-bHL6
> - * COMe-bSL6
> - * COMe-bIP#
> - * COMe-bKL6
> - * COMe-bPC2 (ETXexpress-PC)
> - * COMe-bSC# (ETXexpress-SC T#)
> - * COMe-cAL6
> - * COMe-cBL6
> - * COMe-cBT6
> - * COMe-cBW6
> - * COMe-cCT6
> - * COMe-cDC2 (microETXexpress-DC)
> - * COMe-cHL6
> - * COMe-cKL6
> - * COMe-cPC2 (microETXexpress-PC)
> - * COMe-cSL6
> - * COMe-mAL10
> - * COMe-mBT10
> - * COMe-mCT10
> - * COMe-mTT10 (nanoETXexpress-TT)
> - * ETX-OH
> + on some Kontron ETX and nearly all COMexpress (ETXexpress) modules as
> + well as on some other Kontron products. The PLD device may provide
> + functions like watchdog, GPIO, UART and I2C bus.
>
> This driver can also be built as a module. If so, the module
> will be called kempld-core.
> diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
> index ecd26271b9a4..9166075c1f32 100644
> --- a/drivers/mfd/kempld-core.c
> +++ b/drivers/mfd/kempld-core.c
> @@ -552,6 +552,7 @@ static int kempld_remove(struct platform_device *pdev)
>
> #ifdef CONFIG_ACPI
> static const struct acpi_device_id kempld_acpi_table[] = {
> + { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
> { "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
> {}
> };
> @@ -584,6 +585,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "BDV7",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> }, {
> .ident = "BHL6",
> .matches = {
> @@ -648,6 +657,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "CDV7",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> }, {
> .ident = "CHL6",
> .matches = {
> @@ -767,6 +784,22 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "A203",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "M4A1",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> }, {
> .ident = "MAL1",
> .matches = {
> @@ -775,6 +808,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "MAPL",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> }, {
> .ident = "MBR1",
> .matches = {
> @@ -823,6 +864,30 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "PAPL",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "SXAL",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> + }, {
> + .ident = "SXAL4",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> }, {
> .ident = "UNP1",
> .matches = {
> @@ -863,8 +928,7 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> - },
> - {
> + }, {
> .ident = "UTH6",
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> @@ -872,6 +936,14 @@ static const struct dmi_system_id kempld_dmi_table[] __initconst = {
> },
> .driver_data = (void *)&kempld_platform_data_generic,
> .callback = kempld_create_platform_device,
> + }, {
> + .ident = "Q7AL",
> + .matches = {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
> + DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
> + },
> + .driver_data = (void *)&kempld_platform_data_generic,
> + .callback = kempld_create_platform_device,
> },
> {}
> };
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] mfd: kempld-core: Add support for additional devices
2020-11-23 15:53 ` [PATCH v2] " Michael Brunner
2020-11-26 2:06 ` Guenter Roeck
@ 2020-12-02 12:53 ` Lee Jones
1 sibling, 0 replies; 4+ messages in thread
From: Lee Jones @ 2020-12-02 12:53 UTC (permalink / raw)
To: Michael Brunner; +Cc: linux, mibru, vkrasnov, linux-kernel
On Mon, 23 Nov 2020, Michael Brunner wrote:
> This update includes DMI IDs for the following Kontron modules and
> systems:
> COMe-bDV7, COMe-cDV7, COMe-m4AL, COMe-mCT10, SMARC-sXAL, SMARC-sXA4,
> Qseven-Q7AL, mITX-APL, pITX-APL and KBox A-203
>
> Furthermore the ACPI HID KEM0000 is added, as it is also reserved for
> kempld devices.
>
> Instead of also adding the newly supported devices to the Kconfig
> description this patch removes the lengthy list. With future usage of
> the ACPI HIDs it will not be necessary to explicitly add support for
> each individual device to the driver and therefore the list would
> become incomplete anyway.
>
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> ---
>
> v2: Corrected a board name, only use 4 digits for IDs
>
> drivers/mfd/Kconfig | 30 ++--------------
> drivers/mfd/kempld-core.c | 76 +++++++++++++++++++++++++++++++++++++--
> 2 files changed, 77 insertions(+), 29 deletions(-)
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-12-02 12:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-17 9:31 [PATCH] mfd: kempld-core: Add support for additional devices Michael Brunner
2020-11-23 15:53 ` [PATCH v2] " Michael Brunner
2020-11-26 2:06 ` Guenter Roeck
2020-12-02 12:53 ` Lee Jones
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).