[v4 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt

[v4 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt

[Biwen Li]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Add an new IRQ chip declaration for LS1043A and LS1088A
- compatible "fsl,ls1043a-extirq" for LS1043A, LS1046A.
- compatible "fsl,ls1088a-extirq" for LS1088A, LS208xA, LX216xA.
- get mask value directly according to compatible property of DT
  and remove confused code(bit_reverse field of struct ls_extirq_data,
  no need this field for SoC LS1021A. Because the register
  LS1021A_SCFGREVCR is initialized to 0xffffffff by the relative rcw)

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- fix warning when checking patch
	- simplify code
	- update commit message

Change in v3:
	- cleanup code
	- remove robust copyright

Change in v2:
	- add despcription of bit reverse
	- update copyright

 drivers/irqchip/irq-ls-extirq.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/irqchip/irq-ls-extirq.c b/drivers/irqchip/irq-ls-extirq.c
index 4d1179fed77c..f94f974a8764 100644
--- a/drivers/irqchip/irq-ls-extirq.c
+++ b/drivers/irqchip/irq-ls-extirq.c
@@ -18,7 +18,7 @@
 struct ls_extirq_data {
 	struct regmap		*syscon;
 	u32			intpcr;
-	bool			bit_reverse;
+	bool			is_ls1021a_or_ls1043a;
 	u32			nirq;
 	struct irq_fwspec	map[MAXIRQ];
 };
@@ -30,7 +30,7 @@ ls_extirq_set_type(struct irq_data *data, unsigned int type)
 	irq_hw_number_t hwirq = data->hwirq;
 	u32 value, mask;
 
-	if (priv->bit_reverse)
+	if (priv->is_ls1021a_or_ls1043a)
 		mask = 1U << (31 - hwirq);
 	else
 		mask = 1U << hwirq;
@@ -174,14 +174,8 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
 	if (ret)
 		goto out;
 
-	if (of_device_is_compatible(node, "fsl,ls1021a-extirq")) {
-		u32 revcr;
-
-		ret = regmap_read(priv->syscon, LS1021A_SCFGREVCR, &revcr);
-		if (ret)
-			goto out;
-		priv->bit_reverse = (revcr != 0);
-	}
+	priv->is_ls1021a_or_ls1043a = of_device_is_compatible(node, "fsl,ls1021a-extirq") ||
+				      of_device_is_compatible(node, "fsl,ls1043a-extirq");
 
 	domain = irq_domain_add_hierarchy(parent_domain, 0, priv->nirq, node,
 					  &extirq_domain_ops, priv);
@@ -195,3 +189,5 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
 }
 
 IRQCHIP_DECLARE(ls1021a_extirq, "fsl,ls1021a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1043a_extirq, "fsl,ls1043a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1088a_extirq, "fsl,ls1088a-extirq", ls_extirq_of_init);
-- 
2.17.1

[v4 02/11] arm64: dts: ls1043a: add DT node for external interrupt lines

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- remove copyright to fix corrupt

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 0464b8aa4bc4..573e6659cff8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -311,6 +311,31 @@
 			compatible = "fsl,ls1043a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
 		};
 
 		crypto: crypto@1700000 {
-- 
2.17.1

Re: [v4 02/11] arm64: dts: ls1043a: add DT node for external interrupt lines

[Shawn Guo]

On Mon, Nov 30, 2020 at 06:15:06PM +0800, Biwen Li wrote:
> From: Biwen Li <biwen.li@nxp.com>
> 
> Add device-tree node for external interrupt lines IRQ0-IRQ11.
> 
> Signed-off-by: Biwen Li <biwen.li@nxp.com>

Applied 2 ~ 10, thanks.

[v4 03/11] arm64: dts: ls1046a: add DT node for external interrupt lines

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- remove copyright to fix corrupt

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 1fa39bacff4b..4565a1fe366b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -314,6 +314,31 @@
 			compatible = "fsl,ls1046a-scfg", "syscon";
 			reg = <0x0 0x1570000 0x0 0x10000>;
 			big-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1570000 0x10000>;
+
+			extirq: interrupt-controller@1ac {
+				compatible = "fsl,ls1046a-extirq", "fsl,ls1043a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x1ac 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
 		};
 
 		crypto: crypto@1700000 {
-- 
2.17.1

[v4 04/11] arm64: dts: ls1046ardb: Add interrupt line for RTC node

[Biwen Li]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

Add interrupt line for RTC node, which is low level active.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index d53ccc56bb63..60acdf0b689e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -3,6 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-1046A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
  *
  * Mingkai Hu <mingkai.hu@nxp.com>
  */
@@ -74,6 +75,8 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		/* IRQ_RTC_B -> IRQ05, active low */
+		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.17.1

[v4 05/11] arm64: dts: ls1088a: add DT node for external interrupt lines

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- remove copyright to fix corrupt

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index ff5805206a28..a2fcd475088b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -220,6 +220,37 @@
 			little-endian;
 		};
 
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls1088a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
+		};
+
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-- 
2.17.1

[v4 06/11] arm64: dts: ls1088ardb: fix interrupt line for RTC node

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Fix interrupt line for RTC node on ls1088ardb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 5633e59febc3..89c40d3f9a50 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree file for NXP LS1088A RDB Board.
  *
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
  *
  * Harninder Rai <harninder.rai@nxp.com>
  *
@@ -51,8 +51,8 @@
 			rtc@51 {
 				compatible = "nxp,pcf2129";
 				reg = <0x51>;
-				/* IRQ10_B */
-				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+				/* IRQ_RTC_B -> IRQ0_B(CPLD) -> IRQ00(CPU), active low */
+				interrupts-extended = <&extirq 0 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 	};
-- 
2.17.1

[v4 07/11] arm64: dts: ls208xa: add DT node for external interrupt lines

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 33 ++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bf72918fe545..4fdbc6468ce0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -3,7 +3,7 @@
  * Device Tree Include file for Freescale Layerscape-2080A family SoC.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -277,6 +277,37 @@
 			little-endian;
 		};
 
+		isc: syscon@1f70000 {
+			compatible = "fsl,ls2080a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,ls2080a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
+		};
+
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-- 
2.17.1

[v4 08/11] arm64: dts: ls208xa-rdb: add interrupt line for RTC node

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add interrupt line for RTC node on ls208xa-rdb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index d0d670227ae2..4b71c4fcb35f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -3,7 +3,7 @@
  * Device Tree file for Freescale LS2080A RDB Board.
  *
  * Copyright 2016 Freescale Semiconductor, Inc.
- * Copyright 2017 NXP
+ * Copyright 2017-2020 NXP
  *
  * Abhimanyu Saini <abhimanyu.saini@nxp.com>
  *
@@ -56,6 +56,8 @@
 			rtc@68 {
 				compatible = "dallas,ds3232";
 				reg = <0x68>;
+				/* IRQ_RTC_B -> IRQ06, active low */
+				interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
 			};
 		};
 
-- 
2.17.1

[v4 09/11] arm64: dts: lx2160a: add DT node for external interrupt lines

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Add device-tree node for external interrupt lines IRQ0-IRQ11.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- remove copyright to fix corrupt

Change in v3:
	- none

Change in v2:
	- none

 .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 83072da6f6c6..36f3c069529c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -664,6 +664,37 @@
 			little-endian;
 		};
 
+		isc: syscon@1f70000 {
+			compatible = "fsl,lx2160a-isc", "syscon";
+			reg = <0x0 0x1f70000 0x0 0x10000>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+			extirq: interrupt-controller@14 {
+				compatible = "fsl,lx2160a-extirq", "fsl,ls1088a-extirq";
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupt-controller;
+				reg = <0x14 4>;
+				interrupt-map =
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0xffffffff 0x0>;
+			};
+		};
+
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-- 
2.17.1

[v4 10/11] arm64: dts: lx2160ardb: fix interrupt line for RTC node

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Fix interrupt line for RTC node on lx2160ardb

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- none

Change in v2:
	- none

 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 54fe8cd3a711..f3bab76797fb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -2,7 +2,7 @@
 //
 // Device Tree file for LX2160ARDB
 //
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
 
 /dts-v1/;
 
@@ -151,8 +151,8 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
-		// IRQ10_B
-		interrupts = <0 150 0x4>;
+		/* IRQ_RTC_B -> IRQ08, active low */
+		interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.17.1

[v4 11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs

[Biwen Li]

From: Biwen Li <biwen.li@nxp.com>

Update bindings for Layerscape external irqs,
support more SoCs(LS1043A, LS1046A, LS1088A,
LS208xA, LX216xA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
Change in v4:
	- none

Change in v3:
	- remove robust information

Change in v2:
	- update reg property
	- update compatible property

 .../bindings/interrupt-controller/fsl,ls-extirq.txt       | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad7801e8cf..4d47df1a5c91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@
 * Freescale Layerscape external IRQs
 
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@ Supplemental Configuration Unit (SCFG).
 
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
   interrupts.
 - interrupt-map-mask: Must be <0xffffffff 0>.
-- 
2.17.1

Re: [v4 11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs

[Rob Herring]

On Mon, 30 Nov 2020 18:15:15 +0800, Biwen Li wrote:
> From: Biwen Li <biwen.li@nxp.com>
> 
> Update bindings for Layerscape external irqs,
> support more SoCs(LS1043A, LS1046A, LS1088A,
> LS208xA, LX216xA)
> 
> Signed-off-by: Biwen Li <biwen.li@nxp.com>
> ---
> Change in v4:
> 	- none
> 
> Change in v3:
> 	- remove robust information
> 
> Change in v2:
> 	- update reg property
> 	- update compatible property
> 
>  .../bindings/interrupt-controller/fsl,ls-extirq.txt       | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

[irqchip: irq/irqchip-next] dt-bindings: interrupt-controller: update bindings for supporting more SoCs

[irqchip-bot for Biwen Li]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     9898a59358d7cb925f63bb77bd40224d1bc4857e
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/9898a59358d7cb925f63bb77bd40224d1bc4857e
Author:        Biwen Li <biwen.li@nxp.com>
AuthorDate:    Mon, 30 Nov 2020 18:15:15 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 11 Dec 2020 14:45:21 

dt-bindings: interrupt-controller: update bindings for supporting more SoCs

Update bindings for Layerscape external irqs,
support more SoCs(LS1043A, LS1046A, LS1088A,
LS208xA, LX216xA)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-11-biwen.li@oss.nxp.com
---
 Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
index f0ad780..4d47df1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
@@ -1,6 +1,7 @@
 * Freescale Layerscape external IRQs
 
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting
+Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
+LS1088A, LS208xA, LX216xA) support inverting
 the polarity of certain external interrupt lines.
 
 The device node must be a child of the node representing the
@@ -8,12 +9,15 @@ Supplemental Configuration Unit (SCFG).
 
 Required properties:
 - compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
+  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
+  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
 - #interrupt-cells: Must be 2. The first element is the index of the
   external interrupt line. The second element is the trigger type.
 - #address-cells: Must be 0.
 - interrupt-controller: Identifies the node as an interrupt controller
 - reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG.
+  the SCFG or the External Interrupt Control Register (IRQCR) in
+  the ISC.
 - interrupt-map: Specifies the mapping from external interrupts to GIC
   interrupts.
 - interrupt-map-mask: Must be <0xffffffff 0>.

[irqchip: irq/irqchip-next] irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support

[irqchip-bot for Hou Zhiqiang]

The following commit has been merged into the irq/irqchip-next branch of irqchip:

Commit-ID:     b16a1caf4686895427c810219d4b2f796e676160
Gitweb:        https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/b16a1caf4686895427c810219d4b2f796e676160
Author:        Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
AuthorDate:    Mon, 30 Nov 2020 18:15:05 +08:00
Committer:     Marc Zyngier <maz@kernel.org>
CommitterDate: Fri, 11 Dec 2020 14:43:16 

irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support

Add an new IRQ chip declaration for LS1043A and LS1088A, and cleanup
the use of the "bit_reverse" property, now gated on the Soc type.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-1-biwen.li@oss.nxp.com
---
 drivers/irqchip/irq-ls-extirq.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/irqchip/irq-ls-extirq.c b/drivers/irqchip/irq-ls-extirq.c
index 4d1179f..f94f974 100644
--- a/drivers/irqchip/irq-ls-extirq.c
+++ b/drivers/irqchip/irq-ls-extirq.c
@@ -18,7 +18,7 @@
 struct ls_extirq_data {
 	struct regmap		*syscon;
 	u32			intpcr;
-	bool			bit_reverse;
+	bool			is_ls1021a_or_ls1043a;
 	u32			nirq;
 	struct irq_fwspec	map[MAXIRQ];
 };
@@ -30,7 +30,7 @@ ls_extirq_set_type(struct irq_data *data, unsigned int type)
 	irq_hw_number_t hwirq = data->hwirq;
 	u32 value, mask;
 
-	if (priv->bit_reverse)
+	if (priv->is_ls1021a_or_ls1043a)
 		mask = 1U << (31 - hwirq);
 	else
 		mask = 1U << hwirq;
@@ -174,14 +174,8 @@ ls_extirq_of_init(struct device_node *node, struct device_node *parent)
 	if (ret)
 		goto out;
 
-	if (of_device_is_compatible(node, "fsl,ls1021a-extirq")) {
-		u32 revcr;
-
-		ret = regmap_read(priv->syscon, LS1021A_SCFGREVCR, &revcr);
-		if (ret)
-			goto out;
-		priv->bit_reverse = (revcr != 0);
-	}
+	priv->is_ls1021a_or_ls1043a = of_device_is_compatible(node, "fsl,ls1021a-extirq") ||
+				      of_device_is_compatible(node, "fsl,ls1043a-extirq");
 
 	domain = irq_domain_add_hierarchy(parent_domain, 0, priv->nirq, node,
 					  &extirq_domain_ops, priv);
@@ -195,3 +189,5 @@ out:
 }
 
 IRQCHIP_DECLARE(ls1021a_extirq, "fsl,ls1021a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1043a_extirq, "fsl,ls1043a-extirq", ls_extirq_of_init);
+IRQCHIP_DECLARE(ls1088a_extirq, "fsl,ls1088a-extirq", ls_extirq_of_init);

Re: [v4 01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt

[Marc Zyngier]

On Mon, 30 Nov 2020 18:15:05 +0800, Biwen Li wrote:
> Add an new IRQ chip declaration for LS1043A and LS1088A
> - compatible "fsl,ls1043a-extirq" for LS1043A, LS1046A.
> - compatible "fsl,ls1088a-extirq" for LS1088A, LS208xA, LX216xA.
> - get mask value directly according to compatible property of DT
>   and remove confused code(bit_reverse field of struct ls_extirq_data,
>   no need this field for SoC LS1021A. Because the register
>   LS1021A_SCFGREVCR is initialized to 0xffffffff by the relative rcw)

Applied to irq/irqchip-next, thanks!

[01/11] irqchip: ls-extirq: Add LS1043A, LS1088A external interrupt
        commit: b16a1caf4686895427c810219d4b2f796e676160
[11/11] dt-bindings: interrupt-controller: update bindings for supporting more SoCs
        commit: 9898a59358d7cb925f63bb77bd40224d1bc4857e

Patches 2-10 should be routed via the SoC tree.

Cheers,

	M.
-- 
Without deviation from the norm, progress is not possible.