[PATCH 4.19 00/77] 4.19.167-rc1 review

[PATCH 4.19 00/77] 4.19.167-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.167 release.
There are 77 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.167-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.167-rc1

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: fix shift out of bounds reported by UBSAN

Ying-Tsun Huang <ying-tsun.huang@amd.com>
    x86/mtrr: Correct the range check before performing MTRR type lookups

Florian Westphal <fw@strlen.de>
    netfilter: xt_RATEEST: reject non-null terminated string from userspace

Vasily Averin <vvs@virtuozzo.com>
    netfilter: ipset: fix shift-out-of-bounds in htable_bits()

Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
    netfilter: x_tables: Update remaining dereference to RCU

Roger Pau Monne <roger.pau@citrix.com>
    xen/pvh: correctly setup the PV EFI interface for dom0

Bard Liao <yung-chuan.liao@linux.intel.com>
    Revert "device property: Keep secondary firmware node secondary by type"

Filipe Manana <fdmanana@suse.com>
    btrfs: send: fix wrong file path when there is an inode with a pending rmdir

Kailang Yang <kailang@realtek.com>
    ALSA: hda/realtek - Fix speaker volume control on Lenovo C940

bo liu <bo.liu@senarytech.com>
    ALSA: hda/conexant: add a new hda codec CX11970

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/via: Fix runtime PM for Clevo W35xSS

Dan Williams <dan.j.williams@intel.com>
    x86/mm: Fix leak of pmd ptlock

Johan Hovold <johan@kernel.org>
    USB: serial: keyspan_pda: remove unused variable

Eddie Hung <eddie.hung@mediatek.com>
    usb: gadget: configfs: Fix use-after-free issue with udc_name

Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
    usb: gadget: configfs: Preserve function ordering after bind failure

Sriharsha Allenki <sallenki@codeaurora.org>
    usb: gadget: Fix spinlock lockup on usb_function_deactivate

Yang Yingliang <yangyingliang@huawei.com>
    USB: gadget: legacy: fix return error code in acm_ms_bind()

Manish Narani <manish.narani@xilinx.com>
    usb: gadget: u_ether: Fix MTU size mismatch with RX packet size

Zqiang <qiang.zhang@windriver.com>
    usb: gadget: function: printer: Fix a memory leak for interface descriptor

Jerome Brunet <jbrunet@baylibre.com>
    usb: gadget: f_uac2: reset wMaxPacketSize

Arnd Bergmann <arnd@arndb.de>
    usb: gadget: select CONFIG_CRC32

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks

Johan Hovold <johan@kernel.org>
    USB: usblp: fix DMA to stack

Johan Hovold <johan@kernel.org>
    USB: yurex: fix control-URB timeout handling

Bjørn Mork <bjorn@mork.no>
    USB: serial: option: add Quectel EM160R-GL

Daniel Palmer <daniel@0x0f.com>
    USB: serial: option: add LongSung M5710 module support

Johan Hovold <johan@kernel.org>
    USB: serial: iuu_phoenix: fix DMA from stack

Thinh Nguyen <Thinh.Nguyen@synopsys.com>
    usb: uas: Add PNY USB Portable SSD to unusual_uas

Randy Dunlap <rdunlap@infradead.org>
    usb: usbip: vhci_hcd: protect shift size

Michael Grzeschik <m.grzeschik@pengutronix.de>
    USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set

Yu Kuai <yukuai3@huawei.com>
    usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion

Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
    USB: cdc-wdm: Fix use after free in service_outstanding_interrupt().

Sean Young <sean@mess.org>
    USB: cdc-acm: blacklist another IR Droid device

taehyun.cho <taehyun.cho@samsung.com>
    usb: gadget: enable super speed plus

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    staging: mt7621-dma: Fix a resource leak in an error handling path

Ard Biesheuvel <ardb@kernel.org>
    crypto: ecdh - avoid buffer overflow in ecdh_set_secret()

Dexuan Cui <decui@microsoft.com>
    video: hyperv_fb: Fix the mmap() regression for v5.4.y and older

Hans de Goede <hdegoede@redhat.com>
    Bluetooth: revert: hci_h5: close serdev device and free hu in h5_close

Florian Fainelli <f.fainelli@gmail.com>
    net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when accessing xps_rxqs_map and num_tc

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when storing xps_rxqs

Randy Dunlap <rdunlap@infradead.org>
    net: sched: prevent invalid Scell_log shift count

Yunjian Wang <wangyunjian@huawei.com>
    vhost_net: fix ubuf refcount incorrectly when sendmsg fails

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: work around power-saving bug on some chip versions

Bjørn Mork <bjorn@mork.no>
    net: usb: qmi_wwan: add Quectel EM160R-GL

Roland Dreier <roland@kernel.org>
    CDC-NCM: remove "connected" log message

Xie He <xie.he.0141@gmail.com>
    net: hdlc_ppp: Fix issues when mod_timer is called while timer is running

Cong Wang <cong.wang@bytedance.com>
    erspan: fix version 1 check in gre_parse_header()

Yunjian Wang <wangyunjian@huawei.com>
    net: hns: fix return value check in __lb_other_process()

Guillaume Nault <gnault@redhat.com>
    ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()

Yunjian Wang <wangyunjian@huawei.com>
    tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS

Grygorii Strashko <grygorii.strashko@ti.com>
    net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tc

Antoine Tenart <atenart@kernel.org>
    net-sysfs: take the rtnl lock when storing xps_cpus

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net: ethernet: Fix memleak in ethoc_probe

John Wang <wangzhiqiang.bj@bytedance.com>
    net/ncsi: Use real net-device for response handler

Petr Machata <me@pmachata.org>
    net: dcb: Validate netlink message in DCB handler

Jeff Dike <jdike@akamai.com>
    virtio_net: Fix recursive call to cpus_read_lock()

Manish Chopra <manishc@marvell.com>
    qede: fix offload for IPIP tunnel packets

Stefan Chulski <stefanc@marvell.com>
    net: mvpp2: Fix GoP port 3 Networking Complex Control configurations

Dan Carpenter <dan.carpenter@oracle.com>
    atm: idt77252: call pci_disable_device() on error path

Rasmus Villemoes <rasmus.villemoes@prevas.dk>
    ethernet: ucc_geth: set dev->max_mtu to 1518

Rasmus Villemoes <rasmus.villemoes@prevas.dk>
    ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()

Stefan Chulski <stefanc@marvell.com>
    net: mvpp2: prs: fix PPPoE with ipv6 packet parse

Stefan Chulski <stefanc@marvell.com>
    net: mvpp2: Add TCAM entry to drop flow control pause frames

Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
    i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs

Alexey Dobriyan <adobriyan@gmail.com>
    proc: fix lookup in /proc/net subdirectories after setns(2)

Alexey Dobriyan <adobriyan@gmail.com>
    proc: change ->nlink under proc_subdir_lock

Linus Torvalds <torvalds@linux-foundation.org>
    depmod: handle the case of /sbin/depmod without /sbin in PATH

Huang Shijie <sjhuang@iluvatar.ai>
    lib/genalloc: fix the overflow when size is too big

Bart Van Assche <bvanassche@acm.org>
    scsi: scsi_transport_spi: Set RQF_PM for domain validation commands

Bart Van Assche <bvanassche@acm.org>
    scsi: ide: Do not set the RQF_PREEMPT flag for sense requests

Adrian Hunter <adrian.hunter@intel.com>
    scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()

Bean Huo <beanhuo@micron.com>
    scsi: ufs: Fix wrong print message in dev_err()

Yunfeng Ye <yeyunfeng@huawei.com>
    workqueue: Kick a worker based on the actual activation of delayed works

Dominique Martinet <asmadeus@codewreck.org>
    kbuild: don't hardcode depmod path


-------------

Diffstat:

 Makefile                                           |  6 +-
 arch/x86/kernel/cpu/mtrr/generic.c                 |  6 +-
 arch/x86/kvm/mmu.h                                 |  2 +-
 arch/x86/mm/pgtable.c                              |  2 +
 arch/x86/xen/efi.c                                 | 12 ++--
 arch/x86/xen/enlighten_pv.c                        |  2 +-
 arch/x86/xen/enlighten_pvh.c                       |  4 ++
 arch/x86/xen/xen-ops.h                             |  4 +-
 crypto/ecdh.c                                      |  3 +-
 drivers/atm/idt77252.c                             |  2 +-
 drivers/base/core.c                                |  2 +-
 drivers/bluetooth/hci_h5.c                         |  8 +--
 drivers/ide/ide-atapi.c                            |  1 -
 drivers/ide/ide-io.c                               |  5 --
 drivers/net/ethernet/broadcom/bcmsysport.c         |  1 +
 drivers/net/ethernet/ethoc.c                       |  3 +-
 drivers/net/ethernet/freescale/ucc_geth.c          |  3 +-
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c   |  4 ++
 drivers/net/ethernet/intel/i40e/i40e.h             |  3 +
 drivers/net/ethernet/intel/i40e/i40e_main.c        | 10 ++++
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |  4 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |  2 +-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c     | 38 +++++++++++-
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h     |  2 +-
 drivers/net/ethernet/qlogic/qede/qede_fp.c         |  5 ++
 drivers/net/ethernet/realtek/r8169.c               |  6 +-
 drivers/net/ethernet/ti/cpts.c                     |  2 +
 drivers/net/tun.c                                  |  2 +-
 drivers/net/usb/cdc_ncm.c                          |  3 -
 drivers/net/usb/qmi_wwan.c                         |  1 +
 drivers/net/virtio_net.c                           | 12 ++--
 drivers/net/wan/hdlc_ppp.c                         |  7 +++
 drivers/scsi/scsi_transport_spi.c                  | 27 ++++++---
 drivers/scsi/ufs/ufshcd-pci.c                      | 34 ++++++++++-
 drivers/scsi/ufs/ufshcd.c                          |  2 +-
 drivers/staging/mt7621-dma/mtk-hsdma.c             |  4 +-
 drivers/usb/chipidea/ci_hdrc_imx.c                 |  6 +-
 drivers/usb/class/cdc-acm.c                        |  4 ++
 drivers/usb/class/cdc-wdm.c                        | 16 ++++-
 drivers/usb/class/usblp.c                          | 21 ++++++-
 drivers/usb/dwc3/core.h                            |  1 +
 drivers/usb/dwc3/ulpi.c                            |  2 +-
 drivers/usb/gadget/Kconfig                         |  2 +
 drivers/usb/gadget/composite.c                     | 10 +++-
 drivers/usb/gadget/configfs.c                      | 19 ++++--
 drivers/usb/gadget/function/f_printer.c            |  1 +
 drivers/usb/gadget/function/f_uac2.c               | 69 +++++++++++++++++-----
 drivers/usb/gadget/function/u_ether.c              |  9 +--
 drivers/usb/gadget/legacy/acm_ms.c                 |  4 +-
 drivers/usb/host/xhci.c                            | 24 ++++----
 drivers/usb/misc/yurex.c                           |  3 +
 drivers/usb/serial/iuu_phoenix.c                   | 20 +++++--
 drivers/usb/serial/keyspan_pda.c                   |  2 -
 drivers/usb/serial/option.c                        |  3 +
 drivers/usb/storage/unusual_uas.h                  |  7 +++
 drivers/usb/usbip/vhci_hcd.c                       |  2 +
 drivers/vhost/net.c                                |  6 +-
 drivers/video/fbdev/hyperv_fb.c                    |  6 +-
 fs/btrfs/send.c                                    | 49 +++++++++------
 fs/proc/generic.c                                  | 55 +++++++++++------
 fs/proc/internal.h                                 |  7 +++
 fs/proc/proc_net.c                                 | 16 -----
 include/linux/proc_fs.h                            |  8 ++-
 include/net/red.h                                  |  4 +-
 kernel/workqueue.c                                 | 13 +++-
 lib/genalloc.c                                     | 25 ++++----
 net/core/net-sysfs.c                               | 65 ++++++++++++++++----
 net/dcb/dcbnl.c                                    |  2 +
 net/ipv4/fib_frontend.c                            |  2 +-
 net/ipv4/gre_demux.c                               |  2 +-
 net/ipv4/netfilter/arp_tables.c                    |  2 +-
 net/ipv4/netfilter/ip_tables.c                     |  2 +-
 net/ipv6/netfilter/ip6_tables.c                    |  2 +-
 net/ncsi/ncsi-rsp.c                                |  2 +-
 net/netfilter/ipset/ip_set_hash_gen.h              | 20 ++-----
 net/netfilter/xt_RATEEST.c                         |  3 +
 net/sched/sch_choke.c                              |  2 +-
 net/sched/sch_gred.c                               |  2 +-
 net/sched/sch_red.c                                |  2 +-
 net/sched/sch_sfq.c                                |  2 +-
 scripts/depmod.sh                                  |  2 +
 sound/pci/hda/hda_intel.c                          |  2 -
 sound/pci/hda/patch_conexant.c                     |  1 +
 sound/pci/hda/patch_realtek.c                      |  6 ++
 sound/pci/hda/patch_via.c                          | 13 ++++
 sound/usb/midi.c                                   |  4 ++
 86 files changed, 556 insertions(+), 230 deletions(-)

[PATCH 4.19 01/77] kbuild: dont hardcode depmod path

[Greg Kroah-Hartman]

From: Dominique Martinet <asmadeus@codewreck.org>

commit 436e980e2ed526832de822cbf13c317a458b78e1 upstream.

depmod is not guaranteed to be in /sbin, just let make look for
it in the path like all the other invoked programs

Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -400,7 +400,7 @@ YACC		= bison
 AWK		= awk
 GENKSYMS	= scripts/genksyms/genksyms
 INSTALLKERNEL  := installkernel
-DEPMOD		= /sbin/depmod
+DEPMOD		= depmod
 PERL		= perl
 PYTHON		= python
 PYTHON2		= python2

[PATCH 4.19 02/77] workqueue: Kick a worker based on the actual activation of delayed works

[Greg Kroah-Hartman]

From: Yunfeng Ye <yeyunfeng@huawei.com>

[ Upstream commit 01341fbd0d8d4e717fc1231cdffe00343088ce0b ]

In realtime scenario, We do not want to have interference on the
isolated cpu cores. but when invoking alloc_workqueue() for percpu wq
on the housekeeping cpu, it kick a kworker on the isolated cpu.

  alloc_workqueue
    pwq_adjust_max_active
      wake_up_worker

The comment in pwq_adjust_max_active() said:
  "Need to kick a worker after thawed or an unbound wq's
   max_active is bumped"

So it is unnecessary to kick a kworker for percpu's wq when invoking
alloc_workqueue(). this patch only kick a worker based on the actual
activation of delayed works.

Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/workqueue.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index eef77c82d2e19..cd98ef48345e1 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -3554,17 +3554,24 @@ static void pwq_adjust_max_active(struct pool_workqueue *pwq)
 	 * is updated and visible.
 	 */
 	if (!freezable || !workqueue_freezing) {
+		bool kick = false;
+
 		pwq->max_active = wq->saved_max_active;
 
 		while (!list_empty(&pwq->delayed_works) &&
-		       pwq->nr_active < pwq->max_active)
+		       pwq->nr_active < pwq->max_active) {
 			pwq_activate_first_delayed(pwq);
+			kick = true;
+		}
 
 		/*
 		 * Need to kick a worker after thawed or an unbound wq's
-		 * max_active is bumped.  It's a slow path.  Do it always.
+		 * max_active is bumped. In realtime scenarios, always kicking a
+		 * worker will cause interference on the isolated cpu cores, so
+		 * let's kick iff work items were activated.
 		 */
-		wake_up_worker(pwq->pool);
+		if (kick)
+			wake_up_worker(pwq->pool);
 	} else {
 		pwq->max_active = 0;
 	}
-- 
2.27.0

[PATCH 4.19 03/77] scsi: ufs: Fix wrong print message in dev_err()

[Greg Kroah-Hartman]

From: Bean Huo <beanhuo@micron.com>

[ Upstream commit 1fa0570002e3f66db9b58c32c60de4183b857a19 ]

Change dev_err() print message from "dme-reset" to "dme_enable" in function
ufshcd_dme_enable().

Link: https://lore.kernel.org/r/20201207190137.6858-3-huobean@gmail.com
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 61b1eae42ea85..40f478c4d118f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3583,7 +3583,7 @@ static int ufshcd_dme_enable(struct ufs_hba *hba)
 	ret = ufshcd_send_uic_cmd(hba, &uic_cmd);
 	if (ret)
 		dev_err(hba->dev,
-			"dme-reset: error code %d\n", ret);
+			"dme-enable: error code %d\n", ret);
 
 	return ret;
 }
-- 
2.27.0

[PATCH 4.19 04/77] scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

[ Upstream commit af423534d2de86cd0db729a5ac41f056ca8717de ]

The expectation for suspend-to-disk is that devices will be powered-off, so
the UFS device should be put in PowerDown mode. If spm_lvl is not 5, then
that will not happen. Change the pm callbacks to force spm_lvl 5 for
suspend-to-disk poweroff.

Link: https://lore.kernel.org/r/20201207083120.26732-3-adrian.hunter@intel.com
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd-pci.c | 34 ++++++++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c
index ffe6f82182ba8..68f4f67c5ff88 100644
--- a/drivers/scsi/ufs/ufshcd-pci.c
+++ b/drivers/scsi/ufs/ufshcd-pci.c
@@ -96,6 +96,30 @@ static int ufshcd_pci_resume(struct device *dev)
 {
 	return ufshcd_system_resume(dev_get_drvdata(dev));
 }
+
+/**
+ * ufshcd_pci_poweroff - suspend-to-disk poweroff function
+ * @dev: pointer to PCI device handle
+ *
+ * Returns 0 if successful
+ * Returns non-zero otherwise
+ */
+static int ufshcd_pci_poweroff(struct device *dev)
+{
+	struct ufs_hba *hba = dev_get_drvdata(dev);
+	int spm_lvl = hba->spm_lvl;
+	int ret;
+
+	/*
+	 * For poweroff we need to set the UFS device to PowerDown mode.
+	 * Force spm_lvl to ensure that.
+	 */
+	hba->spm_lvl = 5;
+	ret = ufshcd_system_suspend(hba);
+	hba->spm_lvl = spm_lvl;
+	return ret;
+}
+
 #endif /* !CONFIG_PM_SLEEP */
 
 #ifdef CONFIG_PM
@@ -190,8 +214,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 }
 
 static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend,
-				ufshcd_pci_resume)
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= ufshcd_pci_suspend,
+	.resume		= ufshcd_pci_resume,
+	.freeze		= ufshcd_pci_suspend,
+	.thaw		= ufshcd_pci_resume,
+	.poweroff	= ufshcd_pci_poweroff,
+	.restore	= ufshcd_pci_resume,
+#endif
 	SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
 			   ufshcd_pci_runtime_resume,
 			   ufshcd_pci_runtime_idle)
-- 
2.27.0

[PATCH 4.19 05/77] scsi: ide: Do not set the RQF_PREEMPT flag for sense requests

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit 96d86e6a80a3ab9aff81d12f9f1f2a0da2917d38 ]

RQF_PREEMPT is used for two different purposes in the legacy IDE code:

 1. To mark power management requests.

 2. To mark requests that should preempt another request. An (old)
    explanation of that feature is as follows: "The IDE driver in the Linux
    kernel normally uses a series of busywait delays during its
    initialization. When the driver executes these busywaits, the kernel
    does nothing for the duration of the wait. The time spent in these
    waits could be used for other initialization activities, if they could
    be run concurrently with these waits.

    More specifically, busywait-style delays such as udelay() in module
    init functions inhibit kernel preemption because the Big Kernel Lock is
    held, while yielding APIs such as schedule_timeout() allow
    preemption. This is true because the kernel handles the BKL specially
    and releases and reacquires it across reschedules allowed by the
    current thread.

    This IDE-preempt specification requires that the driver eliminate these
    busywaits and replace them with a mechanism that allows other work to
    proceed while the IDE driver is initializing."

Since I haven't found an implementation of (2), do not set the PREEMPT flag
for sense requests. This patch causes sense requests to be postponed while
a drive is suspended instead of being submitted to ide_queue_rq().

If it would ever be necessary to restore the IDE PREEMPT functionality,
that can be done by introducing a new flag in struct ide_request.

Link: https://lore.kernel.org/r/20201209052951.16136-4-bvanassche@acm.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ide/ide-atapi.c | 1 -
 drivers/ide/ide-io.c    | 5 -----
 2 files changed, 6 deletions(-)

diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 8b2b72b938857..4224c4dd89635 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -213,7 +213,6 @@ void ide_prep_sense(ide_drive_t *drive, struct request *rq)
 	sense_rq->rq_disk = rq->rq_disk;
 	sense_rq->cmd_flags = REQ_OP_DRV_IN;
 	ide_req(sense_rq)->type = ATA_PRIV_SENSE;
-	sense_rq->rq_flags |= RQF_PREEMPT;
 
 	req->cmd[0] = GPCMD_REQUEST_SENSE;
 	req->cmd[4] = cmd_len;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 0d93e0cfbeaf9..4381760846109 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -527,11 +527,6 @@ repeat:
 		 * above to return us whatever is in the queue. Since we call
 		 * ide_do_request() ourselves, we end up taking requests while
 		 * the queue is blocked...
-		 * 
-		 * We let requests forced at head of queue with ide-preempt
-		 * though. I hope that doesn't happen too much, hopefully not
-		 * unless the subdriver triggers such a thing in its own PM
-		 * state machine.
 		 */
 		if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
 		    ata_pm_request(rq) == 0 &&
-- 
2.27.0

[PATCH 4.19 06/77] scsi: scsi_transport_spi: Set RQF_PM for domain validation commands

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit cfefd9f8240a7b9fdd96fcd54cb029870b6d8d88 ]

Disable runtime power management during domain validation. Since a later
patch removes RQF_PREEMPT, set RQF_PM for domain validation commands such
that these are executed in the quiesced SCSI device state.

Link: https://lore.kernel.org/r/20201209052951.16136-6-bvanassche@acm.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Woody Suwalski <terraluna977@gmail.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Stan Johnson <userm57@yahoo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_spi.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 69213842e63e0..efb9c3d902133 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -130,12 +130,16 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
 		sshdr = &sshdr_tmp;
 
 	for(i = 0; i < DV_RETRIES; i++) {
+		/*
+		 * The purpose of the RQF_PM flag below is to bypass the
+		 * SDEV_QUIESCE state.
+		 */
 		result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
 				      sshdr, DV_TIMEOUT, /* retries */ 1,
 				      REQ_FAILFAST_DEV |
 				      REQ_FAILFAST_TRANSPORT |
 				      REQ_FAILFAST_DRIVER,
-				      0, NULL);
+				      RQF_PM, NULL);
 		if (driver_byte(result) != DRIVER_SENSE ||
 		    sshdr->sense_key != UNIT_ATTENTION)
 			break;
@@ -1018,23 +1022,26 @@ spi_dv_device(struct scsi_device *sdev)
 	 */
 	lock_system_sleep();
 
+	if (scsi_autopm_get_device(sdev))
+		goto unlock_system_sleep;
+
 	if (unlikely(spi_dv_in_progress(starget)))
-		goto unlock;
+		goto put_autopm;
 
 	if (unlikely(scsi_device_get(sdev)))
-		goto unlock;
+		goto put_autopm;
 
 	spi_dv_in_progress(starget) = 1;
 
 	buffer = kzalloc(len, GFP_KERNEL);
 
 	if (unlikely(!buffer))
-		goto out_put;
+		goto put_sdev;
 
 	/* We need to verify that the actual device will quiesce; the
 	 * later target quiesce is just a nice to have */
 	if (unlikely(scsi_device_quiesce(sdev)))
-		goto out_free;
+		goto free_buffer;
 
 	scsi_target_quiesce(starget);
 
@@ -1054,12 +1061,16 @@ spi_dv_device(struct scsi_device *sdev)
 
 	spi_initial_dv(starget) = 1;
 
- out_free:
+free_buffer:
 	kfree(buffer);
- out_put:
+
+put_sdev:
 	spi_dv_in_progress(starget) = 0;
 	scsi_device_put(sdev);
-unlock:
+put_autopm:
+	scsi_autopm_put_device(sdev);
+
+unlock_system_sleep:
 	unlock_system_sleep();
 }
 EXPORT_SYMBOL(spi_dv_device);
-- 
2.27.0

[PATCH 4.19 07/77] lib/genalloc: fix the overflow when size is too big

[Greg Kroah-Hartman]

From: Huang Shijie <sjhuang@iluvatar.ai>

[ Upstream commit 36845663843fc59c5d794e3dc0641472e3e572da ]

Some graphic card has very big memory on chip, such as 32G bytes.

In the following case, it will cause overflow:

    pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
    ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);

    va = gen_pool_alloc(pool, SZ_4G);

The overflow occurs in gen_pool_alloc_algo_owner():

		....
		size = nbits << order;
		....

The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.

This patch converts some "int" to "unsigned long", and
changes the compare code in while.

Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/genalloc.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/lib/genalloc.c b/lib/genalloc.c
index 7e85d1e37a6ea..0b8ee173cf3a6 100644
--- a/lib/genalloc.c
+++ b/lib/genalloc.c
@@ -83,14 +83,14 @@ static int clear_bits_ll(unsigned long *addr, unsigned long mask_to_clear)
  * users set the same bit, one user will return remain bits, otherwise
  * return 0.
  */
-static int bitmap_set_ll(unsigned long *map, int start, int nr)
+static int bitmap_set_ll(unsigned long *map, unsigned long start, unsigned long nr)
 {
 	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
+	const unsigned long size = start + nr;
 	int bits_to_set = BITS_PER_LONG - (start % BITS_PER_LONG);
 	unsigned long mask_to_set = BITMAP_FIRST_WORD_MASK(start);
 
-	while (nr - bits_to_set >= 0) {
+	while (nr >= bits_to_set) {
 		if (set_bits_ll(p, mask_to_set))
 			return nr;
 		nr -= bits_to_set;
@@ -118,14 +118,15 @@ static int bitmap_set_ll(unsigned long *map, int start, int nr)
  * users clear the same bit, one user will return remain bits,
  * otherwise return 0.
  */
-static int bitmap_clear_ll(unsigned long *map, int start, int nr)
+static unsigned long
+bitmap_clear_ll(unsigned long *map, unsigned long start, unsigned long nr)
 {
 	unsigned long *p = map + BIT_WORD(start);
-	const int size = start + nr;
+	const unsigned long size = start + nr;
 	int bits_to_clear = BITS_PER_LONG - (start % BITS_PER_LONG);
 	unsigned long mask_to_clear = BITMAP_FIRST_WORD_MASK(start);
 
-	while (nr - bits_to_clear >= 0) {
+	while (nr >= bits_to_clear) {
 		if (clear_bits_ll(p, mask_to_clear))
 			return nr;
 		nr -= bits_to_clear;
@@ -184,8 +185,8 @@ int gen_pool_add_virt(struct gen_pool *pool, unsigned long virt, phys_addr_t phy
 		 size_t size, int nid)
 {
 	struct gen_pool_chunk *chunk;
-	int nbits = size >> pool->min_alloc_order;
-	int nbytes = sizeof(struct gen_pool_chunk) +
+	unsigned long nbits = size >> pool->min_alloc_order;
+	unsigned long nbytes = sizeof(struct gen_pool_chunk) +
 				BITS_TO_LONGS(nbits) * sizeof(long);
 
 	chunk = vzalloc_node(nbytes, nid);
@@ -242,7 +243,7 @@ void gen_pool_destroy(struct gen_pool *pool)
 	struct list_head *_chunk, *_next_chunk;
 	struct gen_pool_chunk *chunk;
 	int order = pool->min_alloc_order;
-	int bit, end_bit;
+	unsigned long bit, end_bit;
 
 	list_for_each_safe(_chunk, _next_chunk, &pool->chunks) {
 		chunk = list_entry(_chunk, struct gen_pool_chunk, next_chunk);
@@ -293,7 +294,7 @@ unsigned long gen_pool_alloc_algo(struct gen_pool *pool, size_t size,
 	struct gen_pool_chunk *chunk;
 	unsigned long addr = 0;
 	int order = pool->min_alloc_order;
-	int nbits, start_bit, end_bit, remain;
+	unsigned long nbits, start_bit, end_bit, remain;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
@@ -376,7 +377,7 @@ void gen_pool_free(struct gen_pool *pool, unsigned long addr, size_t size)
 {
 	struct gen_pool_chunk *chunk;
 	int order = pool->min_alloc_order;
-	int start_bit, nbits, remain;
+	unsigned long start_bit, nbits, remain;
 
 #ifndef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG
 	BUG_ON(in_nmi());
@@ -638,7 +639,7 @@ unsigned long gen_pool_best_fit(unsigned long *map, unsigned long size,
 	index = bitmap_find_next_zero_area(map, size, start, nr, 0);
 
 	while (index < size) {
-		int next_bit = find_next_bit(map, size, index + nr);
+		unsigned long next_bit = find_next_bit(map, size, index + nr);
 		if ((next_bit - index) < len) {
 			len = next_bit - index;
 			start_bit = index;
-- 
2.27.0

[PATCH 4.19 08/77] depmod: handle the case of /sbin/depmod without /sbin in PATH

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit cedd1862be7e666be87ec824dabc6a2b05618f36 ]

Commit 436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).

Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.

Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/depmod.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/depmod.sh b/scripts/depmod.sh
index e083bcae343f3..3643b4f896ede 100755
--- a/scripts/depmod.sh
+++ b/scripts/depmod.sh
@@ -15,6 +15,8 @@ if ! test -r System.map ; then
 	exit 0
 fi
 
+# legacy behavior: "depmod" in /sbin, no /sbin in PATH
+PATH="$PATH:/sbin"
 if [ -z $(command -v $DEPMOD) ]; then
 	echo "Warning: 'make modules_install' requires $DEPMOD. Please install it." >&2
 	echo "This is probably in the kmod package." >&2
-- 
2.27.0

[PATCH 4.19 09/77] proc: change ->nlink under proc_subdir_lock

[Greg Kroah-Hartman]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit e06689bf57017ac022ccf0f2a5071f760821ce0f ]

Currently gluing PDE into global /proc tree is done under lock, but
changing ->nlink is not.  Additionally struct proc_dir_entry::nlink is
not atomic so updates can be lost.

Link: http://lkml.kernel.org/r/20190925202436.GA17388@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/generic.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index e39bac94dead0..7820fe524cb03 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -137,8 +137,12 @@ static int proc_getattr(const struct path *path, struct kstat *stat,
 {
 	struct inode *inode = d_inode(path->dentry);
 	struct proc_dir_entry *de = PDE(inode);
-	if (de && de->nlink)
-		set_nlink(inode, de->nlink);
+	if (de) {
+		nlink_t nlink = READ_ONCE(de->nlink);
+		if (nlink > 0) {
+			set_nlink(inode, nlink);
+		}
+	}
 
 	generic_fillattr(inode, stat);
 	return 0;
@@ -361,6 +365,7 @@ struct proc_dir_entry *proc_register(struct proc_dir_entry *dir,
 		write_unlock(&proc_subdir_lock);
 		goto out_free_inum;
 	}
+	dir->nlink++;
 	write_unlock(&proc_subdir_lock);
 
 	return dp;
@@ -471,10 +476,7 @@ struct proc_dir_entry *proc_mkdir_data(const char *name, umode_t mode,
 		ent->data = data;
 		ent->proc_fops = &proc_dir_operations;
 		ent->proc_iops = &proc_dir_inode_operations;
-		parent->nlink++;
 		ent = proc_register(parent, ent);
-		if (!ent)
-			parent->nlink--;
 	}
 	return ent;
 }
@@ -504,10 +506,7 @@ struct proc_dir_entry *proc_create_mount_point(const char *name)
 		ent->data = NULL;
 		ent->proc_fops = NULL;
 		ent->proc_iops = NULL;
-		parent->nlink++;
 		ent = proc_register(parent, ent);
-		if (!ent)
-			parent->nlink--;
 	}
 	return ent;
 }
@@ -665,8 +664,12 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
 	len = strlen(fn);
 
 	de = pde_subdir_find(parent, fn, len);
-	if (de)
+	if (de) {
 		rb_erase(&de->subdir_node, &parent->subdir);
+		if (S_ISDIR(de->mode)) {
+			parent->nlink--;
+		}
+	}
 	write_unlock(&proc_subdir_lock);
 	if (!de) {
 		WARN(1, "name '%s'\n", name);
@@ -675,9 +678,6 @@ void remove_proc_entry(const char *name, struct proc_dir_entry *parent)
 
 	proc_entry_rundown(de);
 
-	if (S_ISDIR(de->mode))
-		parent->nlink--;
-	de->nlink = 0;
 	WARN(pde_subdir_first(de),
 	     "%s: removing non-empty directory '%s/%s', leaking at least '%s'\n",
 	     __func__, de->parent->name, de->name, pde_subdir_first(de)->name);
@@ -713,13 +713,12 @@ int remove_proc_subtree(const char *name, struct proc_dir_entry *parent)
 			de = next;
 			continue;
 		}
-		write_unlock(&proc_subdir_lock);
-
-		proc_entry_rundown(de);
 		next = de->parent;
 		if (S_ISDIR(de->mode))
 			next->nlink--;
-		de->nlink = 0;
+		write_unlock(&proc_subdir_lock);
+
+		proc_entry_rundown(de);
 		if (de == root)
 			break;
 		pde_put(de);
-- 
2.27.0

[PATCH 4.19 10/77] proc: fix lookup in /proc/net subdirectories after setns(2)

[Greg Kroah-Hartman]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit c6c75deda81344c3a95d1d1f606d5cee109e5d54 ]

Commit 1fde6f21d90f ("proc: fix /proc/net/* after setns(2)") only forced
revalidation of regular files under /proc/net/

However, /proc/net/ is unusual in the sense of /proc/net/foo handlers
take netns pointer from parent directory which is old netns.

Steps to reproduce:

	(void)open("/proc/net/sctp/snmp", O_RDONLY);
	unshare(CLONE_NEWNET);

	int fd = open("/proc/net/sctp/snmp", O_RDONLY);
	read(fd, &c, 1);

Read will read wrong data from original netns.

Patch forces lookup on every directory under /proc/net .

Link: https://lkml.kernel.org/r/20201205160916.GA109739@localhost.localdomain
Fixes: 1da4d377f943 ("proc: revalidate misc dentries")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/proc/generic.c       | 24 ++++++++++++++++++++++--
 fs/proc/internal.h      |  7 +++++++
 fs/proc/proc_net.c      | 16 ----------------
 include/linux/proc_fs.h |  8 +++++++-
 4 files changed, 36 insertions(+), 19 deletions(-)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 7820fe524cb03..bab10368a04d8 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -341,6 +341,16 @@ static const struct file_operations proc_dir_operations = {
 	.iterate_shared		= proc_readdir,
 };
 
+static int proc_net_d_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return 0;
+}
+
+const struct dentry_operations proc_net_dentry_ops = {
+	.d_revalidate	= proc_net_d_revalidate,
+	.d_delete	= always_delete_dentry,
+};
+
 /*
  * proc directories can do almost nothing..
  */
@@ -463,8 +473,8 @@ struct proc_dir_entry *proc_symlink(const char *name,
 }
 EXPORT_SYMBOL(proc_symlink);
 
-struct proc_dir_entry *proc_mkdir_data(const char *name, umode_t mode,
-		struct proc_dir_entry *parent, void *data)
+struct proc_dir_entry *_proc_mkdir(const char *name, umode_t mode,
+		struct proc_dir_entry *parent, void *data, bool force_lookup)
 {
 	struct proc_dir_entry *ent;
 
@@ -476,10 +486,20 @@ struct proc_dir_entry *proc_mkdir_data(const char *name, umode_t mode,
 		ent->data = data;
 		ent->proc_fops = &proc_dir_operations;
 		ent->proc_iops = &proc_dir_inode_operations;
+		if (force_lookup) {
+			pde_force_lookup(ent);
+		}
 		ent = proc_register(parent, ent);
 	}
 	return ent;
 }
+EXPORT_SYMBOL_GPL(_proc_mkdir);
+
+struct proc_dir_entry *proc_mkdir_data(const char *name, umode_t mode,
+		struct proc_dir_entry *parent, void *data)
+{
+	return _proc_mkdir(name, mode, parent, data, false);
+}
 EXPORT_SYMBOL_GPL(proc_mkdir_data);
 
 struct proc_dir_entry *proc_mkdir_mode(const char *name, umode_t mode,
diff --git a/fs/proc/internal.h b/fs/proc/internal.h
index 95b14196f2842..4f14906ef16b5 100644
--- a/fs/proc/internal.h
+++ b/fs/proc/internal.h
@@ -305,3 +305,10 @@ extern unsigned long task_statm(struct mm_struct *,
 				unsigned long *, unsigned long *,
 				unsigned long *, unsigned long *);
 extern void task_mem(struct seq_file *, struct mm_struct *);
+
+extern const struct dentry_operations proc_net_dentry_ops;
+static inline void pde_force_lookup(struct proc_dir_entry *pde)
+{
+	/* /proc/net/ entries can be changed under us by setns(CLONE_NEWNET) */
+	pde->proc_dops = &proc_net_dentry_ops;
+}
diff --git a/fs/proc/proc_net.c b/fs/proc/proc_net.c
index a7b12435519e0..096bcc1e7a8a5 100644
--- a/fs/proc/proc_net.c
+++ b/fs/proc/proc_net.c
@@ -38,22 +38,6 @@ static struct net *get_proc_net(const struct inode *inode)
 	return maybe_get_net(PDE_NET(PDE(inode)));
 }
 
-static int proc_net_d_revalidate(struct dentry *dentry, unsigned int flags)
-{
-	return 0;
-}
-
-static const struct dentry_operations proc_net_dentry_ops = {
-	.d_revalidate	= proc_net_d_revalidate,
-	.d_delete	= always_delete_dentry,
-};
-
-static void pde_force_lookup(struct proc_dir_entry *pde)
-{
-	/* /proc/net/ entries can be changed under us by setns(CLONE_NEWNET) */
-	pde->proc_dops = &proc_net_dentry_ops;
-}
-
 static int seq_open_net(struct inode *inode, struct file *file)
 {
 	unsigned int state_size = PDE(inode)->state_size;
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index d0e1f1522a78e..5141657a0f7f6 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -21,6 +21,7 @@ extern void proc_flush_task(struct task_struct *);
 
 extern struct proc_dir_entry *proc_symlink(const char *,
 		struct proc_dir_entry *, const char *);
+struct proc_dir_entry *_proc_mkdir(const char *, umode_t, struct proc_dir_entry *, void *, bool);
 extern struct proc_dir_entry *proc_mkdir(const char *, struct proc_dir_entry *);
 extern struct proc_dir_entry *proc_mkdir_data(const char *, umode_t,
 					      struct proc_dir_entry *, void *);
@@ -89,6 +90,11 @@ static inline struct proc_dir_entry *proc_symlink(const char *name,
 static inline struct proc_dir_entry *proc_mkdir(const char *name,
 	struct proc_dir_entry *parent) {return NULL;}
 static inline struct proc_dir_entry *proc_create_mount_point(const char *name) { return NULL; }
+static inline struct proc_dir_entry *_proc_mkdir(const char *name, umode_t mode,
+		struct proc_dir_entry *parent, void *data, bool force_lookup)
+{
+	return NULL;
+}
 static inline struct proc_dir_entry *proc_mkdir_data(const char *name,
 	umode_t mode, struct proc_dir_entry *parent, void *data) { return NULL; }
 static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
@@ -121,7 +127,7 @@ struct net;
 static inline struct proc_dir_entry *proc_net_mkdir(
 	struct net *net, const char *name, struct proc_dir_entry *parent)
 {
-	return proc_mkdir_data(name, 0, parent, net);
+	return _proc_mkdir(name, 0, parent, net, true);
 }
 
 struct ns_common;
-- 
2.27.0

[PATCH 4.19 11/77] i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs

[Greg Kroah-Hartman]

From: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>

[ Upstream commit 3ac874fa84d1baaf0c0175f2a1499f5d88d528b2 ]

When removing VFs for PF added to bridge there was
an error I40E_AQ_RC_EINVAL. It was caused by not properly
resetting and reinitializing PF when adding/removing VFs.
Changed how reset is performed when adding/removing VFs
to properly reinitialize PFs VSI.

Fixes: fc60861e9b00 ("i40e: start up in VEPA mode by default")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e.h             |    3 +++
 drivers/net/ethernet/intel/i40e/i40e_main.c        |   10 ++++++++++
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c |    4 ++--
 3 files changed, 15 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -127,6 +127,7 @@ enum i40e_state_t {
 	__I40E_RESET_INTR_RECEIVED,
 	__I40E_REINIT_REQUESTED,
 	__I40E_PF_RESET_REQUESTED,
+	__I40E_PF_RESET_AND_REBUILD_REQUESTED,
 	__I40E_CORE_RESET_REQUESTED,
 	__I40E_GLOBAL_RESET_REQUESTED,
 	__I40E_EMP_RESET_REQUESTED,
@@ -153,6 +154,8 @@ enum i40e_state_t {
 };
 
 #define I40E_PF_RESET_FLAG	BIT_ULL(__I40E_PF_RESET_REQUESTED)
+#define I40E_PF_RESET_AND_REBUILD_FLAG	\
+	BIT_ULL(__I40E_PF_RESET_AND_REBUILD_REQUESTED)
 
 /* VSI state flags */
 enum i40e_vsi_state_t {
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -42,6 +42,8 @@ static int i40e_setup_misc_vector(struct
 static void i40e_determine_queue_usage(struct i40e_pf *pf);
 static int i40e_setup_pf_filter_control(struct i40e_pf *pf);
 static void i40e_prep_for_reset(struct i40e_pf *pf, bool lock_acquired);
+static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit,
+				   bool lock_acquired);
 static int i40e_reset(struct i40e_pf *pf);
 static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired);
 static void i40e_fdir_sb_setup(struct i40e_pf *pf);
@@ -7929,6 +7931,14 @@ void i40e_do_reset(struct i40e_pf *pf, u
 		dev_dbg(&pf->pdev->dev, "PFR requested\n");
 		i40e_handle_reset_warning(pf, lock_acquired);
 
+	} else if (reset_flags & I40E_PF_RESET_AND_REBUILD_FLAG) {
+		/* Request a PF Reset
+		 *
+		 * Resets PF and reinitializes PFs VSI.
+		 */
+		i40e_prep_for_reset(pf, lock_acquired);
+		i40e_reset_and_rebuild(pf, true, lock_acquired);
+
 	} else if (reset_flags & BIT_ULL(__I40E_REINIT_REQUESTED)) {
 		int v;
 
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1567,7 +1567,7 @@ int i40e_pci_sriov_configure(struct pci_
 	if (num_vfs) {
 		if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
 			pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
-			i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
+			i40e_do_reset_safe(pf, I40E_PF_RESET_AND_REBUILD_FLAG);
 		}
 		return i40e_pci_sriov_enable(pdev, num_vfs);
 	}
@@ -1575,7 +1575,7 @@ int i40e_pci_sriov_configure(struct pci_
 	if (!pci_vfs_assigned(pf->pdev)) {
 		i40e_free_vfs(pf);
 		pf->flags &= ~I40E_FLAG_VEB_MODE_ENABLED;
-		i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
+		i40e_do_reset_safe(pf, I40E_PF_RESET_AND_REBUILD_FLAG);
 	} else {
 		dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n");
 		return -EINVAL;

[PATCH 4.19 12/77] net: mvpp2: Add TCAM entry to drop flow control pause frames

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit 3f48fab62bb81a7f9d01e9d43c40395fad011dd5 ]

Issue:
Flow control frame used to pause GoP(MAC) was delivered to the CPU
and created a load on the CPU. Since XOFF/XON frames are used only
by MAC, these frames should be dropped inside MAC.

Fix:
According to 802.3-2012 - IEEE Standard for Ethernet pause frame
has unique destination MAC address 01-80-C2-00-00-01.
Add TCAM parser entry to track and drop pause frames by destination MAC.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c |   33 +++++++++++++++++++++++++
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h |    2 -
 2 files changed, 34 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -405,6 +405,38 @@ static int mvpp2_prs_tcam_first_free(str
 	return -EINVAL;
 }
 
+/* Drop flow control pause frames */
+static void mvpp2_prs_drop_fc(struct mvpp2 *priv)
+{
+	unsigned char da[ETH_ALEN] = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x01 };
+	struct mvpp2_prs_entry pe;
+	unsigned int len;
+
+	memset(&pe, 0, sizeof(pe));
+
+	/* For all ports - drop flow control frames */
+	pe.index = MVPP2_PE_FC_DROP;
+	mvpp2_prs_tcam_lu_set(&pe, MVPP2_PRS_LU_MAC);
+
+	/* Set match on DA */
+	len = ETH_ALEN;
+	while (len--)
+		mvpp2_prs_tcam_data_byte_set(&pe, len, da[len], 0xff);
+
+	mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_DROP_MASK,
+				 MVPP2_PRS_RI_DROP_MASK);
+
+	mvpp2_prs_sram_bits_set(&pe, MVPP2_PRS_SRAM_LU_GEN_BIT, 1);
+	mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_FLOWS);
+
+	/* Mask all ports */
+	mvpp2_prs_tcam_port_map_set(&pe, MVPP2_PRS_PORT_MASK);
+
+	/* Update shadow table and hw entry */
+	mvpp2_prs_shadow_set(priv, pe.index, MVPP2_PRS_LU_MAC);
+	mvpp2_prs_hw_write(priv, &pe);
+}
+
 /* Enable/disable dropping all mac da's */
 static void mvpp2_prs_mac_drop_all_set(struct mvpp2 *priv, int port, bool add)
 {
@@ -1162,6 +1194,7 @@ static void mvpp2_prs_mac_init(struct mv
 	mvpp2_prs_hw_write(priv, &pe);
 
 	/* Create dummy entries for drop all and promiscuous modes */
+	mvpp2_prs_drop_fc(priv);
 	mvpp2_prs_mac_drop_all_set(priv, 0, false);
 	mvpp2_prs_mac_promisc_set(priv, 0, MVPP2_PRS_L2_UNI_CAST, false);
 	mvpp2_prs_mac_promisc_set(priv, 0, MVPP2_PRS_L2_MULTI_CAST, false);
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h
@@ -129,7 +129,7 @@
 #define MVPP2_PE_VID_EDSA_FLTR_DEFAULT	(MVPP2_PRS_TCAM_SRAM_SIZE - 7)
 #define MVPP2_PE_VLAN_DBL		(MVPP2_PRS_TCAM_SRAM_SIZE - 6)
 #define MVPP2_PE_VLAN_NONE		(MVPP2_PRS_TCAM_SRAM_SIZE - 5)
-/* reserved */
+#define MVPP2_PE_FC_DROP		(MVPP2_PRS_TCAM_SRAM_SIZE - 4)
 #define MVPP2_PE_MAC_MC_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 3)
 #define MVPP2_PE_MAC_UC_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 2)
 #define MVPP2_PE_MAC_NON_PROMISCUOUS	(MVPP2_PRS_TCAM_SRAM_SIZE - 1)

[PATCH 4.19 13/77] net: mvpp2: prs: fix PPPoE with ipv6 packet parse

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit fec6079b2eeab319d9e3d074f54d3b6f623e9701 ]

Current PPPoE+IPv6 entry is jumping to 'next-hdr'
field and not to 'DIP' field as done for IPv4.

Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Reported-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -1680,8 +1680,9 @@ static int mvpp2_prs_pppoe_init(struct m
 	mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_IP6);
 	mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L3_IP6,
 				 MVPP2_PRS_RI_L3_PROTO_MASK);
-	/* Skip eth_type + 4 bytes of IPv6 header */
-	mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN + 4,
+	/* Jump to DIP of IPV6 header */
+	mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN + 8 +
+				 MVPP2_MAX_L3_ADDR_SIZE,
 				 MVPP2_PRS_SRAM_OP_SEL_SHIFT_ADD);
 	/* Set L3 offset */
 	mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L3,

[PATCH 4.19 14/77] ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()

[Greg Kroah-Hartman]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit e925e0cd2a705aaacb0b907bb3691fcac3a973a4 ]

ugeth is the netdiv_priv() part of the netdevice. Accessing the memory
pointed to by ugeth (such as done by ucc_geth_memclean() and the two
of_node_puts) after free_netdev() is thus use-after-free.

Fixes: 80a9fad8e89a ("ucc_geth: fix module removal")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3947,12 +3947,12 @@ static int ucc_geth_remove(struct platfo
 	struct device_node *np = ofdev->dev.of_node;
 
 	unregister_netdev(dev);
-	free_netdev(dev);
 	ucc_geth_memclean(ugeth);
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(ugeth->ug_info->tbi_node);
 	of_node_put(ugeth->ug_info->phy_node);
+	free_netdev(dev);
 
 	return 0;
 }

[PATCH 4.19 15/77] ethernet: ucc_geth: set dev->max_mtu to 1518

[Greg Kroah-Hartman]

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>

[ Upstream commit 1385ae5c30f238f81bc6528d897c6d7a0816783f ]

All the buffers and registers are already set up appropriately for an
MTU slightly above 1500, so we just need to expose this to the
networking stack. AFAICT, there's no need to implement .ndo_change_mtu
when the receive buffers are always set up to support the max_mtu.

This fixes several warnings during boot on our mpc8309-board with an
embedded mv88e6250 switch:

mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0
...
mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4
ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead

The last line explains what the DSA stack tries to do: achieving an MTU
of 1500 on-the-wire requires that the master netdevice connected to
the CPU port supports an MTU of 1500+the tagging overhead.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -3902,6 +3902,7 @@ static int ucc_geth_probe(struct platfor
 	INIT_WORK(&ugeth->timeout_work, ucc_geth_timeout_work);
 	netif_napi_add(dev, &ugeth->napi, ucc_geth_poll, 64);
 	dev->mtu = 1500;
+	dev->max_mtu = 1518;
 
 	ugeth->msg_enable = netif_msg_init(debug.msg_enable, UGETH_MSG_DEFAULT);
 	ugeth->phy_interface = phy_interface;

[PATCH 4.19 16/77] atm: idt77252: call pci_disable_device() on error path

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 8df66af5c1e5f80562fe728db5ec069b21810144 ]

This error path needs to disable the pci device before returning.

Fixes: ede58ef28e10 ("atm: remove deprecated use of pci api")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X93dmC4NX0vbTpGp@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/atm/idt77252.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3607,7 +3607,7 @@ static int idt77252_init_one(struct pci_
 
 	if ((err = dma_set_mask_and_coherent(&pcidev->dev, DMA_BIT_MASK(32)))) {
 		printk("idt77252: can't enable DMA for PCI device at %s\n", pci_name(pcidev));
-		return err;
+		goto err_out_disable_pdev;
 	}
 
 	card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);

[PATCH 4.19 17/77] net: mvpp2: Fix GoP port 3 Networking Complex Control configurations

[Greg Kroah-Hartman]

From: Stefan Chulski <stefanc@marvell.com>

[ Upstream commit 2575bc1aa9d52a62342b57a0b7d0a12146cf6aed ]

During GoP port 2 Networking Complex Control mode of operation configurations,
also GoP port 3 mode of operation was wrongly set.
Patch removes these configurations.

Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP")
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -954,7 +954,7 @@ static void mvpp22_gop_init_rgmii(struct
 
 	regmap_read(priv->sysctrl_base, GENCONF_CTRL0, &val);
 	if (port->gop_id == 2)
-		val |= GENCONF_CTRL0_PORT0_RGMII | GENCONF_CTRL0_PORT1_RGMII;
+		val |= GENCONF_CTRL0_PORT0_RGMII;
 	else if (port->gop_id == 3)
 		val |= GENCONF_CTRL0_PORT1_RGMII_MII;
 	regmap_write(priv->sysctrl_base, GENCONF_CTRL0, val);

[PATCH 4.19 18/77] qede: fix offload for IPIP tunnel packets

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 5d5647dad259bb416fd5d3d87012760386d97530 ]

IPIP tunnels packets are unknown to device,
hence these packets are incorrectly parsed and
caused the packet corruption, so disable offlods
for such packets at run time.

Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qede/qede_fp.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/qlogic/qede/qede_fp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_fp.c
@@ -1747,6 +1747,11 @@ netdev_features_t qede_features_check(st
 			      ntohs(udp_hdr(skb)->dest) != gnv_port))
 				return features & ~(NETIF_F_CSUM_MASK |
 						    NETIF_F_GSO_MASK);
+		} else if (l4_proto == IPPROTO_IPIP) {
+			/* IPIP tunnels are unknown to the device or at least unsupported natively,
+			 * offloads for them can't be done trivially, so disable them for such skb.
+			 */
+			return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
 		}
 	}
 

[PATCH 4.19 19/77] virtio_net: Fix recursive call to cpus_read_lock()

[Greg Kroah-Hartman]

From: Jeff Dike <jdike@akamai.com>

[ Upstream commit de33212f768c5d9e2fe791b008cb26f92f0aa31c ]

virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS
and CONFIG_HOTPLUG are enabled.

The path is:
    virtnet_set_channels - calls get_online_cpus(), which is a trivial
wrapper around cpus_read_lock()
    netif_set_real_num_tx_queues
    netif_reset_xps_queues_gt
    netif_reset_xps_queues - calls cpus_read_lock()

This call chain and potential deadlock happens when the number of TX
queues is reduced.

This commit the removes netif_set_real_num_[tr]x_queues calls from
inside the get/put_online_cpus section, as they don't require that it
be held.

Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive")
Signed-off-by: Jeff Dike <jdike@akamai.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/virtio_net.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2077,14 +2077,16 @@ static int virtnet_set_channels(struct n
 
 	get_online_cpus();
 	err = _virtnet_set_queues(vi, queue_pairs);
-	if (!err) {
-		netif_set_real_num_tx_queues(dev, queue_pairs);
-		netif_set_real_num_rx_queues(dev, queue_pairs);
-
-		virtnet_set_affinity(vi);
+	if (err) {
+		put_online_cpus();
+		goto err;
 	}
+	virtnet_set_affinity(vi);
 	put_online_cpus();
 
+	netif_set_real_num_tx_queues(dev, queue_pairs);
+	netif_set_real_num_rx_queues(dev, queue_pairs);
+ err:
 	return err;
 }
 

[PATCH 4.19 20/77] net: dcb: Validate netlink message in DCB handler

[Greg Kroah-Hartman]

From: Petr Machata <me@pmachata.org>

[ Upstream commit 826f328e2b7e8854dd42ea44e6519cd75018e7b1 ]

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata <me@pmachata.org>
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dcb/dcbnl.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1756,6 +1756,8 @@ static int dcb_doit(struct sk_buff *skb,
 	fn = &reply_funcs[dcb->cmd];
 	if (!fn->cb)
 		return -EOPNOTSUPP;
+	if (fn->type != nlh->nlmsg_type)
+		return -EPERM;
 
 	if (!tb[DCB_ATTR_IFNAME])
 		return -EINVAL;

[PATCH 4.19 21/77] net/ncsi: Use real net-device for response handler

[Greg Kroah-Hartman]

From: John Wang <wangzhiqiang.bj@bytedance.com>

[ Upstream commit 427c940558560bff2583d07fc119a21094675982 ]

When aggregating ncsi interfaces and dedicated interfaces to bond
interfaces, the ncsi response handler will use the wrong net device to
find ncsi_dev, so that the ncsi interface will not work properly.
Here, we use the original net device to fix it.

Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler")
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Link: https://lore.kernel.org/r/20201223055523.2069-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ncsi/ncsi-rsp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -949,7 +949,7 @@ int ncsi_rcv_rsp(struct sk_buff *skb, st
 	int payload, i, ret;
 
 	/* Find the NCSI device */
-	nd = ncsi_find_dev(dev);
+	nd = ncsi_find_dev(orig_dev);
 	ndp = nd ? TO_NCSI_DEV_PRIV(nd) : NULL;
 	if (!ndp)
 		return -ENODEV;

[PATCH 4.19 22/77] net: ethernet: Fix memleak in ethoc_probe

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 5d41f9b7ee7a5a5138894f58846a4ffed601498a ]

When mdiobus_register() fails, priv->mdio allocated
by mdiobus_alloc() has not been freed, which leads
to memleak.

Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ethoc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -1213,7 +1213,7 @@ static int ethoc_probe(struct platform_d
 	ret = mdiobus_register(priv->mdio);
 	if (ret) {
 		dev_err(&netdev->dev, "failed to register MDIO bus\n");
-		goto free2;
+		goto free3;
 	}
 
 	ret = ethoc_mdio_probe(netdev);
@@ -1245,6 +1245,7 @@ error2:
 	netif_napi_del(&priv->napi);
 error:
 	mdiobus_unregister(priv->mdio);
+free3:
 	mdiobus_free(priv->mdio);
 free2:
 	clk_disable_unprepare(priv->clk);

[PATCH 4.19 23/77] net-sysfs: take the rtnl lock when storing xps_cpus

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 1ad58225dba3f2f598d2c6daed4323f24547168f ]

Two race conditions can be triggered when storing xps cpus, resulting in
various oops and invalid memory accesses:

1. Calling netdev_set_num_tc while netif_set_xps_queue:

   - netif_set_xps_queue uses dev->tc_num as one of the parameters to
     compute the size of new_dev_maps when allocating it. dev->tc_num is
     also used to access the map, and the compiler may generate code to
     retrieve this field multiple times in the function.

   - netdev_set_num_tc sets dev->tc_num.

   If new_dev_maps is allocated using dev->tc_num and then dev->tc_num
   is set to a higher value through netdev_set_num_tc, later accesses to
   new_dev_maps in netif_set_xps_queue could lead to accessing memory
   outside of new_dev_maps; triggering an oops.

2. Calling netif_set_xps_queue while netdev_set_num_tc is running:

   2.1. netdev_set_num_tc starts by resetting the xps queues,
        dev->tc_num isn't updated yet.

   2.2. netif_set_xps_queue is called, setting up the map with the
        *old* dev->num_tc.

   2.3. netdev_set_num_tc updates dev->tc_num.

   2.4. Later accesses to the map lead to out of bound accesses and
        oops.

   A similar issue can be found with netdev_reset_tc.

One way of triggering this is to set an iface up (for which the driver
uses netdev_set_num_tc in the open path, such as bnx2x) and writing to
xps_cpus in a concurrent thread. With the right timing an oops is
triggered.

Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc
and netdev_reset_tc should be mutually exclusive. We do that by taking
the rtnl lock in xps_cpus_store.

Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1323,7 +1323,13 @@ static ssize_t xps_cpus_store(struct net
 		return err;
 	}
 
+	if (!rtnl_trylock()) {
+		free_cpumask_var(mask);
+		return restart_syscall();
+	}
+
 	err = netif_set_xps_queue(dev, mask, index);
+	rtnl_unlock();
 
 	free_cpumask_var(mask);
 

[PATCH 4.19 24/77] net-sysfs: take the rtnl lock when accessing xps_cpus_map and num_tc

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit fb25038586d0064123e393cadf1fadd70a9df97a ]

Accesses to dev->xps_cpus_map (when using dev->num_tc) should be
protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't
see an actual bug being triggered, but let's be safe here and take the
rtnl lock while accessing the map in sysfs.

Fixes: 184c449f91fe ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |   29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1244,8 +1244,8 @@ static const struct attribute_group dql_
 static ssize_t xps_cpus_show(struct netdev_queue *queue,
 			     char *buf)
 {
+	int cpu, len, ret, num_tc = 1, tc = 0;
 	struct net_device *dev = queue->dev;
-	int cpu, len, num_tc = 1, tc = 0;
 	struct xps_dev_maps *dev_maps;
 	cpumask_var_t mask;
 	unsigned long index;
@@ -1255,22 +1255,31 @@ static ssize_t xps_cpus_show(struct netd
 
 	index = get_netdev_queue_index(queue);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	if (dev->num_tc) {
 		/* Do not allow XPS on subordinate device directly */
 		num_tc = dev->num_tc;
-		if (num_tc < 0)
-			return -EINVAL;
+		if (num_tc < 0) {
+			ret = -EINVAL;
+			goto err_rtnl_unlock;
+		}
 
 		/* If queue belongs to subordinate dev use its map */
 		dev = netdev_get_tx_queue(dev, index)->sb_dev ? : dev;
 
 		tc = netdev_txq_to_tc(dev, index);
-		if (tc < 0)
-			return -EINVAL;
+		if (tc < 0) {
+			ret = -EINVAL;
+			goto err_rtnl_unlock;
+		}
 	}
 
-	if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
-		return -ENOMEM;
+	if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto err_rtnl_unlock;
+	}
 
 	rcu_read_lock();
 	dev_maps = rcu_dereference(dev->xps_cpus_map);
@@ -1293,9 +1302,15 @@ static ssize_t xps_cpus_show(struct netd
 	}
 	rcu_read_unlock();
 
+	rtnl_unlock();
+
 	len = snprintf(buf, PAGE_SIZE, "%*pb\n", cpumask_pr_args(mask));
 	free_cpumask_var(mask);
 	return len < PAGE_SIZE ? len : -EINVAL;
+
+err_rtnl_unlock:
+	rtnl_unlock();
+	return ret;
 }
 
 static ssize_t xps_cpus_store(struct netdev_queue *queue,

[PATCH 4.19 25/77] net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registered

[Greg Kroah-Hartman]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 4614792eebcbf81c60ad3604c1aeeb2b0899cea4 ]

The CPTS driver registers PTP PHC clock when first netif is going up and
unregister it when all netif are down. Now ethtool will show:
 - PTP PHC clock index 0 after boot until first netif is up;
 - the last assigned PTP PHC clock index even if PTP PHC clock is not
registered any more after all netifs are down.

This patch ensures that -1 is returned by ethtool when PTP PHC clock is not
registered any more.

Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/ti/cpts.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/ti/cpts.c
+++ b/drivers/net/ethernet/ti/cpts.c
@@ -476,6 +476,7 @@ void cpts_unregister(struct cpts *cpts)
 
 	ptp_clock_unregister(cpts->clock);
 	cpts->clock = NULL;
+	cpts->phc_index = -1;
 
 	cpts_write32(cpts, 0, int_enable);
 	cpts_write32(cpts, 0, control);
@@ -577,6 +578,7 @@ struct cpts *cpts_create(struct device *
 	cpts->cc.read = cpts_systim_read;
 	cpts->cc.mask = CLOCKSOURCE_MASK(32);
 	cpts->info = cpts_info;
+	cpts->phc_index = -1;
 
 	cpts_calc_mult_shift(cpts);
 	/* save cc.mult original value as it can be modified

[PATCH 4.19 26/77] tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 950271d7cc0b4546af3549d8143c4132d6e1f138 ]

Currently the tun_napi_alloc_frags() function returns -ENOMEM when the
number of iovs exceeds MAX_SKB_FRAGS + 1. However this is inappropriate,
we should use -EMSGSIZE instead of -ENOMEM.

The following distinctions are matters:
1. the caller need to drop the bad packet when -EMSGSIZE is returned,
   which means meeting a persistent failure.
2. the caller can try again when -ENOMEM is returned, which means
   meeting a transient failure.

Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1608864736-24332-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/tun.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1450,7 +1450,7 @@ static struct sk_buff *tun_napi_alloc_fr
 	int i;
 
 	if (it->nr_segs > MAX_SKB_FRAGS + 1)
-		return ERR_PTR(-ENOMEM);
+		return ERR_PTR(-EMSGSIZE);
 
 	local_bh_disable();
 	skb = napi_get_frags(&tfile->napi);

[PATCH 4.19 27/77] ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()

[Greg Kroah-Hartman]

From: Guillaume Nault <gnault@redhat.com>

[ Upstream commit 21fdca22eb7df2a1e194b8adb812ce370748b733 ]

RT_TOS() only clears one of the ECN bits. Therefore, when
fib_compute_spec_dst() resorts to a fib lookup, it can return
different results depending on the value of the second ECN bit.

For example, ECT(0) and ECT(1) packets could be treated differently.

  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev lo up
  $ ip -netns ns1 link set dev lo up
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up

  $ ip -netns ns0 address add 192.0.2.10/24 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/24 dev veth10

  $ ip -netns ns1 address add 192.0.2.21/32 dev lo
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 src 192.0.2.21
  $ ip netns exec ns1 sysctl -wq net.ipv4.icmp_echo_ignore_broadcasts=0

With TOS 4 and ECT(1), ns1 replies using source address 192.0.2.21
(ping uses -Q to set all TOS and ECN bits):

  $ ip netns exec ns0 ping -c 1 -b -Q 5 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.544 ms

But with TOS 4 and ECT(0), ns1 replies using source address 192.0.2.11
because the "tos 4" route isn't matched:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.597 ms

After this patch the ECN bits don't affect the result anymore:

  $ ip netns exec ns0 ping -c 1 -b -Q 6 192.0.2.255
  [...]
  64 bytes from 192.0.2.21: icmp_seq=1 ttl=64 time=0.591 ms

Fixes: 35ebf65e851c ("ipv4: Create and use fib_compute_spec_dst() helper.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/fib_frontend.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -302,7 +302,7 @@ __be32 fib_compute_spec_dst(struct sk_bu
 			.flowi4_iif = LOOPBACK_IFINDEX,
 			.flowi4_oif = l3mdev_master_ifindex_rcu(dev),
 			.daddr = ip_hdr(skb)->saddr,
-			.flowi4_tos = RT_TOS(ip_hdr(skb)->tos),
+			.flowi4_tos = ip_hdr(skb)->tos & IPTOS_RT_MASK,
 			.flowi4_scope = scope,
 			.flowi4_mark = vmark ? skb->mark : 0,
 		};

[PATCH 4.19 28/77] net: hns: fix return value check in __lb_other_process()

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 5ede3ada3da7f050519112b81badc058190b9f9f ]

The function skb_copy() could return NULL, the return value
need to be checked.

Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_ethtool.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_ethtool.c
@@ -419,6 +419,10 @@ static void __lb_other_process(struct hn
 	/* for mutl buffer*/
 	new_skb = skb_copy(skb, GFP_ATOMIC);
 	dev_kfree_skb_any(skb);
+	if (!new_skb) {
+		netdev_err(ndev, "skb alloc failed\n");
+		return;
+	}
 	skb = new_skb;
 
 	check_ok = 0;

[PATCH 4.19 29/77] erspan: fix version 1 check in gre_parse_header()

[Greg Kroah-Hartman]

From: Cong Wang <cong.wang@bytedance.com>

[ Upstream commit 085c7c4e1c0e50d90b7d90f61a12e12b317a91e2 ]

Both version 0 and version 1 use ETH_P_ERSPAN, but version 0 does not
have an erspan header. So the check in gre_parse_header() is wrong,
we have to distinguish version 1 from version 0.

We can just check the gre header length like is_erspan_type1().

Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup")
Reported-by: syzbot+f583ce3d4ddf9836b27a@syzkaller.appspotmail.com
Cc: William Tu <u9012063@gmail.com>
Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/gre_demux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -133,7 +133,7 @@ int gre_parse_header(struct sk_buff *skb
 	 * to 0 and sets the configured key in the
 	 * inner erspan header field
 	 */
-	if (greh->protocol == htons(ETH_P_ERSPAN) ||
+	if ((greh->protocol == htons(ETH_P_ERSPAN) && hdr_len != 4) ||
 	    greh->protocol == htons(ETH_P_ERSPAN2)) {
 		struct erspan_base_hdr *ershdr;
 

[PATCH 4.19 30/77] net: hdlc_ppp: Fix issues when mod_timer is called while timer is running

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 1fef73597fa545c35fddc953979013882fbd4e55 ]

ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock"
held. It may call mod_timer to add a new timer. However, at the same time
ppp_timer may be already running and waiting for "ppp->lock". In this
case, there's no need for ppp_timer to continue running and it can just
exit.

If we let ppp_timer continue running, it may call add_timer. This causes
kernel panic because add_timer can't be called with a timer pending.
This patch fixes this problem.

Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/hdlc_ppp.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -572,6 +572,13 @@ static void ppp_timer(struct timer_list
 	unsigned long flags;
 
 	spin_lock_irqsave(&ppp->lock, flags);
+	/* mod_timer could be called after we entered this function but
+	 * before we got the lock.
+	 */
+	if (timer_pending(&proto->timer)) {
+		spin_unlock_irqrestore(&ppp->lock, flags);
+		return;
+	}
 	switch (proto->state) {
 	case STOPPING:
 	case REQ_SENT:

[PATCH 4.19 31/77] CDC-NCM: remove "connected" log message

[Greg Kroah-Hartman]

From: Roland Dreier <roland@kernel.org>

[ Upstream commit 59b4a8fa27f5a895582ada1ae5034af7c94a57b5 ]

The cdc_ncm driver passes network connection notifications up to
usbnet_link_change(), which is the right place for any logging.
Remove the netdev_info() duplicating this from the driver itself.

This stops devices such as my "TRENDnet USB 10/100/1G/2.5G LAN"
(ID 20f4:e02b) adapter from spamming the kernel log with

    cdc_ncm 2-2:2.0 enp0s2u2c2: network connection: connected

messages every 60 msec or so.

Signed-off-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201224032116.2453938-1-roland@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cdc_ncm.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1629,9 +1629,6 @@ static void cdc_ncm_status(struct usbnet
 		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
 		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
 		 */
-		netif_info(dev, link, dev->net,
-			   "network connection: %sconnected\n",
-			   !!event->wValue ? "" : "dis");
 		usbnet_link_change(dev, !!event->wValue, 0);
 		break;
 

[PATCH 4.19 32/77] net: usb: qmi_wwan: add Quectel EM160R-GL

[Greg Kroah-Hartman]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 2244 bytes --]

From: "Bjørn Mork" <bjorn@mork.no>

[ Upstream commit cfd82dfc9799c53ef109343a23af006a0f6860a9 ]

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -995,6 +995,7 @@ static const struct usb_device_id produc
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
 
 	/* 3. Combined interface devices matching on interface number */

[PATCH 4.19 33/77] r8169: work around power-saving bug on some chip versions

[Greg Kroah-Hartman]

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit e80bd76fbf563cc7ed8c9e9f3bbcdf59b0897f69 ]

A user reported failing network with RTL8168dp (a quite rare chip
version). Realtek confirmed that few chip versions suffer from a PLL
power-down hw bug.

Fixes: 07df5bd874f0 ("r8169: power down chip in probe")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4237,7 +4237,8 @@ static void r8168_pll_power_down(struct
 		return;
 
 	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_33:
+	case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_32 ... RTL_GIGA_MAC_VER_33:
 	case RTL_GIGA_MAC_VER_37:
 	case RTL_GIGA_MAC_VER_39:
 	case RTL_GIGA_MAC_VER_43:
@@ -4263,7 +4264,8 @@ static void r8168_pll_power_down(struct
 static void r8168_pll_power_up(struct rtl8169_private *tp)
 {
 	switch (tp->mac_version) {
-	case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_33:
+	case RTL_GIGA_MAC_VER_25 ... RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_32 ... RTL_GIGA_MAC_VER_33:
 	case RTL_GIGA_MAC_VER_37:
 	case RTL_GIGA_MAC_VER_39:
 	case RTL_GIGA_MAC_VER_43:

[PATCH 4.19 34/77] vhost_net: fix ubuf refcount incorrectly when sendmsg fails

[Greg Kroah-Hartman]

From: Yunjian Wang <wangyunjian@huawei.com>

[ Upstream commit 01e31bea7e622f1890c274f4aaaaf8bccd296aa5 ]

Currently the vhost_zerocopy_callback() maybe be called to decrease
the refcount when sendmsg fails in tun. The error handling in vhost
handle_tx_zerocopy() will try to decrease the same refcount again.
This is wrong. To fix this issue, we only call vhost_net_ubuf_put()
when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS.

Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/vhost/net.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -613,6 +613,7 @@ static void handle_tx_zerocopy(struct vh
 	size_t len, total_len = 0;
 	int err;
 	struct vhost_net_ubuf_ref *uninitialized_var(ubufs);
+	struct ubuf_info *ubuf;
 	bool zcopy_used;
 	int sent_pkts = 0;
 
@@ -645,9 +646,7 @@ static void handle_tx_zerocopy(struct vh
 
 		/* use msg_control to pass vhost zerocopy ubuf info to skb */
 		if (zcopy_used) {
-			struct ubuf_info *ubuf;
 			ubuf = nvq->ubuf_info + nvq->upend_idx;
-
 			vq->heads[nvq->upend_idx].id = cpu_to_vhost32(vq, head);
 			vq->heads[nvq->upend_idx].len = VHOST_DMA_IN_PROGRESS;
 			ubuf->callback = vhost_zerocopy_callback;
@@ -675,7 +674,8 @@ static void handle_tx_zerocopy(struct vh
 		err = sock->ops->sendmsg(sock, &msg, len);
 		if (unlikely(err < 0)) {
 			if (zcopy_used) {
-				vhost_net_ubuf_put(ubufs);
+				if (vq->heads[ubuf->desc].len == VHOST_DMA_IN_PROGRESS)
+					vhost_net_ubuf_put(ubufs);
 				nvq->upend_idx = ((unsigned)nvq->upend_idx - 1)
 					% UIO_MAXIOV;
 			}

[PATCH 4.19 35/77] net: sched: prevent invalid Scell_log shift count

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit bd1248f1ddbc48b0c30565fce897a3b6423313b8 ]

Check Scell_log shift size in red_check_params() and modify all callers
of red_check_params() to pass Scell_log.

This prevents a shift out-of-bounds as detected by UBSAN:
  UBSAN: shift-out-of-bounds in ./include/net/red.h:252:22
  shift exponent 72 is too large for 32-bit type 'int'

Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+97c5bd9cc81eca63d36e@syzkaller.appspotmail.com
Cc: Nogah Frankel <nogahf@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/red.h     |    4 +++-
 net/sched/sch_choke.c |    2 +-
 net/sched/sch_gred.c  |    2 +-
 net/sched/sch_red.c   |    2 +-
 net/sched/sch_sfq.c   |    2 +-
 5 files changed, 7 insertions(+), 5 deletions(-)

--- a/include/net/red.h
+++ b/include/net/red.h
@@ -168,12 +168,14 @@ static inline void red_set_vars(struct r
 	v->qcount	= -1;
 }
 
-static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog)
+static inline bool red_check_params(u32 qth_min, u32 qth_max, u8 Wlog, u8 Scell_log)
 {
 	if (fls(qth_min) + Wlog > 32)
 		return false;
 	if (fls(qth_max) + Wlog > 32)
 		return false;
+	if (Scell_log >= 32)
+		return false;
 	if (qth_max < qth_min)
 		return false;
 	return true;
--- a/net/sched/sch_choke.c
+++ b/net/sched/sch_choke.c
@@ -371,7 +371,7 @@ static int choke_change(struct Qdisc *sc
 
 	ctl = nla_data(tb[TCA_CHOKE_PARMS]);
 
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (ctl->limit > CHOKE_MAX_QUEUE)
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -357,7 +357,7 @@ static inline int gred_change_vq(struct
 	struct gred_sched *table = qdisc_priv(sch);
 	struct gred_sched_data *q = table->tab[dp];
 
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (!q) {
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -214,7 +214,7 @@ static int red_change(struct Qdisc *sch,
 	max_P = tb[TCA_RED_MAX_P] ? nla_get_u32(tb[TCA_RED_MAX_P]) : 0;
 
 	ctl = nla_data(tb[TCA_RED_PARMS]);
-	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog))
+	if (!red_check_params(ctl->qth_min, ctl->qth_max, ctl->Wlog, ctl->Scell_log))
 		return -EINVAL;
 
 	if (ctl->limit > 0) {
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -651,7 +651,7 @@ static int sfq_change(struct Qdisc *sch,
 	}
 
 	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
-					ctl_v1->Wlog))
+					ctl_v1->Wlog, ctl_v1->Scell_log))
 		return -EINVAL;
 	if (ctl_v1 && ctl_v1->qth_min) {
 		p = kmalloc(sizeof(*p), GFP_KERNEL);

[PATCH 4.19 36/77] net-sysfs: take the rtnl lock when storing xps_rxqs

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 2d57b4f142e0b03e854612b8e28978935414bced ]

Two race conditions can be triggered when storing xps rxqs, resulting in
various oops and invalid memory accesses:

1. Calling netdev_set_num_tc while netif_set_xps_queue:

   - netif_set_xps_queue uses dev->tc_num as one of the parameters to
     compute the size of new_dev_maps when allocating it. dev->tc_num is
     also used to access the map, and the compiler may generate code to
     retrieve this field multiple times in the function.

   - netdev_set_num_tc sets dev->tc_num.

   If new_dev_maps is allocated using dev->tc_num and then dev->tc_num
   is set to a higher value through netdev_set_num_tc, later accesses to
   new_dev_maps in netif_set_xps_queue could lead to accessing memory
   outside of new_dev_maps; triggering an oops.

2. Calling netif_set_xps_queue while netdev_set_num_tc is running:

   2.1. netdev_set_num_tc starts by resetting the xps queues,
        dev->tc_num isn't updated yet.

   2.2. netif_set_xps_queue is called, setting up the map with the
        *old* dev->num_tc.

   2.3. netdev_set_num_tc updates dev->tc_num.

   2.4. Later accesses to the map lead to out of bound accesses and
        oops.

   A similar issue can be found with netdev_reset_tc.

One way of triggering this is to set an iface up (for which the driver
uses netdev_set_num_tc in the open path, such as bnx2x) and writing to
xps_rxqs in a concurrent thread. With the right timing an oops is
triggered.

Both issues have the same fix: netif_set_xps_queue, netdev_set_num_tc
and netdev_reset_tc should be mutually exclusive. We do that by taking
the rtnl lock in xps_rxqs_store.

Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1428,10 +1428,17 @@ static ssize_t xps_rxqs_store(struct net
 		return err;
 	}
 
+	if (!rtnl_trylock()) {
+		bitmap_free(mask);
+		return restart_syscall();
+	}
+
 	cpus_read_lock();
 	err = __netif_set_xps_queue(dev, mask, index, true);
 	cpus_read_unlock();
 
+	rtnl_unlock();
+
 	kfree(mask);
 	return err ? : len;
 }

[PATCH 4.19 37/77] net-sysfs: take the rtnl lock when accessing xps_rxqs_map and num_tc

[Greg Kroah-Hartman]

From: Antoine Tenart <atenart@kernel.org>

[ Upstream commit 4ae2bb81649dc03dfc95875f02126b14b773f7ab ]

Accesses to dev->xps_rxqs_map (when using dev->num_tc) should be
protected by the rtnl lock, like we do for netif_set_xps_queue. I didn't
see an actual bug being triggered, but let's be safe here and take the
rtnl lock while accessing the map in sysfs.

Fixes: 8af2c06ff4b1 ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |   23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1356,23 +1356,30 @@ static struct netdev_queue_attribute xps
 
 static ssize_t xps_rxqs_show(struct netdev_queue *queue, char *buf)
 {
+	int j, len, ret, num_tc = 1, tc = 0;
 	struct net_device *dev = queue->dev;
 	struct xps_dev_maps *dev_maps;
 	unsigned long *mask, index;
-	int j, len, num_tc = 1, tc = 0;
 
 	index = get_netdev_queue_index(queue);
 
+	if (!rtnl_trylock())
+		return restart_syscall();
+
 	if (dev->num_tc) {
 		num_tc = dev->num_tc;
 		tc = netdev_txq_to_tc(dev, index);
-		if (tc < 0)
-			return -EINVAL;
+		if (tc < 0) {
+			ret = -EINVAL;
+			goto err_rtnl_unlock;
+		}
 	}
 	mask = kcalloc(BITS_TO_LONGS(dev->num_rx_queues), sizeof(long),
 		       GFP_KERNEL);
-	if (!mask)
-		return -ENOMEM;
+	if (!mask) {
+		ret = -ENOMEM;
+		goto err_rtnl_unlock;
+	}
 
 	rcu_read_lock();
 	dev_maps = rcu_dereference(dev->xps_rxqs_map);
@@ -1398,10 +1405,16 @@ static ssize_t xps_rxqs_show(struct netd
 out_no_maps:
 	rcu_read_unlock();
 
+	rtnl_unlock();
+
 	len = bitmap_print_to_pagebuf(false, buf, mask, dev->num_rx_queues);
 	kfree(mask);
 
 	return len < PAGE_SIZE ? len : -EINVAL;
+
+err_rtnl_unlock:
+	rtnl_unlock();
+	return ret;
 }
 
 static ssize_t xps_rxqs_store(struct netdev_queue *queue, const char *buf,

[PATCH 4.19 38/77] net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZE

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 54ddbdb024882e226055cc4c3c246592ddde2ee5 ]

The driver is already allocating receive buffers of 2KiB and the
Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE.

Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -2507,6 +2507,7 @@ static int bcm_sysport_probe(struct plat
 	/* HW supported features, none enabled by default */
 	dev->hw_features |= NETIF_F_RXCSUM | NETIF_F_HIGHDMA |
 				NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+	dev->max_mtu = UMAC_MAX_MTU_SIZE;
 
 	/* Request the WOL interrupt and advertise suspend if available */
 	priv->wol_irq_disabled = 1;

[PATCH 4.19 39/77] Bluetooth: revert: hci_h5: close serdev device and free hu in h5_close

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 5c3b5796866f85354a5ce76a28f8ffba0dcefc7e upstream.

There have been multiple revisions of the patch fix the h5->rx_skb
leak. Accidentally the first revision (which is buggy) and v5 have
both been merged:

v1 commit 70f259a3f427 ("Bluetooth: hci_h5: close serdev device and free
hu in h5_close");
v5 commit 855af2d74c87 ("Bluetooth: hci_h5: fix memory leak in h5_close")

The correct v5 makes changes slightly higher up in the h5_close()
function, which allowed both versions to get merged without conflict.

The changes from v1 unconditionally frees the h5 data struct, this
is wrong because in the serdev enumeration case the memory is
allocated in h5_serdev_probe() like this:

        h5 = devm_kzalloc(dev, sizeof(*h5), GFP_KERNEL);

So its lifetime is tied to the lifetime of the driver being bound
to the serdev and it is automatically freed when the driver gets
unbound. In the serdev case the same h5 struct is re-used over
h5_close() and h5_open() calls and thus MUST not be free-ed in
h5_close().

The serdev_device_close() added to h5_close() is incorrect in the
same way, serdev_device_close() is called on driver unbound too and
also MUST no be called from h5_close().

This reverts the changes made by merging v1 of the patch, so that
just the changes of the correct v5 remain.

Cc: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/hci_h5.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -263,12 +263,8 @@ static int h5_close(struct hci_uart *hu)
 	if (h5->vnd && h5->vnd->close)
 		h5->vnd->close(h5);
 
-	if (hu->serdev)
-		serdev_device_close(hu->serdev);
-
-	kfree_skb(h5->rx_skb);
-	kfree(h5);
-	h5 = NULL;
+	if (!hu->serdev)
+		kfree(h5);
 
 	return 0;
 }

[PATCH 4.19 40/77] video: hyperv_fb: Fix the mmap() regression for v5.4.y and older

[Greg Kroah-Hartman]

From: Dexuan Cui <decui@microsoft.com>

db49200b1dad is backported from the mainline commit
5f1251a48c17 ("video: hyperv_fb: Fix the cache type when mapping the VRAM"),
to v5.4.y and older stable branches, but unluckily db49200b1dad causes
mmap() to fail for /dev/fb0 due to EINVAL:

[ 5797.049560] x86/PAT: a.out:1910 map pfn expected mapping type
  uncached-minus for [mem 0xf8200000-0xf85cbfff], got write-back

This means the v5.4.y kernel detects an incompatibility issue about the
mapping type of the VRAM: db49200b1dad changes to use Write-Back when
mapping the VRAM, while the mmap() syscall tries to use Uncached-minus.
That’s to say, the kernel thinks Uncached-minus is incompatible with
Write-Back: see drivers/video/fbdev/core/fbmem.c: fb_mmap() ->
vm_iomap_memory() -> io_remap_pfn_range() -> ... -> track_pfn_remap() ->
reserve_pfn_range().

Note: any v5.5 and newer kernel doesn't have the issue, because they
have commit
d21987d709e8 ("video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver")
, and when the hyperv_fb driver has the deferred_io support,
fb_deferred_io_init() overrides info->fbops->fb_mmap with
fb_deferred_io_mmap(), which doesn’t check the mapping type
incompatibility. Note: since it's VRAM here, the checking is not really
necessary.

Fix the regression by ioremap_wc(), which uses Write-combining. The kernel
thinks it's compatible with Uncached-minus. The VRAM mappped by
ioremap_wc() is slightly slower than mapped by ioremap_cache(), but is
still significantly faster than by ioremap().

Change the comment accordingly. Linux VM on ARM64 Hyper-V is still not
working in the latest mainline yet, and when it works in future, the ARM64
support is unlikely to be backported to v5.4 and older, so using
ioremap_wc() in v5.4 and older should be ok.

Note: this fix is only targeted at the stable branches:
v5.4.y, v4.19.y, v4.14.y, v4.9.y and v4.4.y.

Fixes: db49200b1dad ("video: hyperv_fb: Fix the cache type when mapping the VRAM")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/hyperv_fb.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 56e70f12c9960..c907f96d6890c 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -713,11 +713,9 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 	}
 
 	/*
-	 * Map the VRAM cacheable for performance. This is also required for
-	 * VM Connect to display properly for ARM64 Linux VM, as the host also
-	 * maps the VRAM cacheable.
+	 * Map the VRAM cacheable for performance.
 	 */
-	fb_virt = ioremap_cache(par->mem->start, screen_fb_size);
+	fb_virt = ioremap_wc(par->mem->start, screen_fb_size);
 	if (!fb_virt)
 		goto err2;
 
-- 
2.27.0

[PATCH 4.19 41/77] crypto: ecdh - avoid buffer overflow in ecdh_set_secret()

[Greg Kroah-Hartman]

From: Ard Biesheuvel <ardb@kernel.org>

commit 0aa171e9b267ce7c52d3a3df7bc9c1fc0203dec5 upstream.

Pavel reports that commit 17858b140bf4 ("crypto: ecdh - avoid unaligned
accesses in ecdh_set_secret()") fixes one problem but introduces another:
the unconditional memcpy() introduced by that commit may overflow the
target buffer if the source data is invalid, which could be the result of
intentional tampering.

So check params.key_size explicitly against the size of the target buffer
before validating the key further.

Fixes: 17858b140bf4 ("crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/ecdh.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/crypto/ecdh.c
+++ b/crypto/ecdh.c
@@ -43,7 +43,8 @@ static int ecdh_set_secret(struct crypto
 	struct ecdh params;
 	unsigned int ndigits;
 
-	if (crypto_ecdh_decode_key(buf, len, &params) < 0)
+	if (crypto_ecdh_decode_key(buf, len, &params) < 0 ||
+	    params.key_size > sizeof(ctx->private_key))
 		return -EINVAL;
 
 	ndigits = ecdh_supported_curve(params.curve_id);

[PATCH 4.19 42/77] staging: mt7621-dma: Fix a resource leak in an error handling path

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit d887d6104adeb94d1b926936ea21f07367f0ff9f upstream.

If an error occurs after calling 'mtk_hsdma_init()', it must be undone by
a corresponding call to 'mtk_hsdma_uninit()' as already done in the
remove function.

Fixes: 0853c7a53eb3 ("staging: mt7621-dma: ralink: add rt2880 dma engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201213153513.138723-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/mt7621-dma/mtk-hsdma.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/staging/mt7621-dma/mtk-hsdma.c
+++ b/drivers/staging/mt7621-dma/mtk-hsdma.c
@@ -723,7 +723,7 @@ static int mtk_hsdma_probe(struct platfo
 	ret = dma_async_device_register(dd);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register dma device\n");
-		return ret;
+		goto err_uninit_hsdma;
 	}
 
 	ret = of_dma_controller_register(pdev->dev.of_node,
@@ -739,6 +739,8 @@ static int mtk_hsdma_probe(struct platfo
 
 err_unregister:
 	dma_async_device_unregister(dd);
+err_uninit_hsdma:
+	mtk_hsdma_uninit(hsdma);
 	return ret;
 }
 

[PATCH 4.19 43/77] usb: gadget: enable super speed plus

[Greg Kroah-Hartman]

From: taehyun.cho <taehyun.cho@samsung.com>

commit e2459108b5a0604c4b472cae2b3cb8d3444c77fb upstream.

Enable Super speed plus in configfs to support USB3.1 Gen2.
This ensures that when a USB gadget is plugged in, it is
enumerated as Gen 2 and connected at 10 Gbps if the host and
cable are capable of it.

Many in-tree gadget functions (fs, midi, acm, ncm, mass_storage,
etc.) already have SuperSpeed Plus support.

Tested: plugged gadget into Linux host and saw:
[284907.385986] usb 8-2: new SuperSpeedPlus Gen 2 USB device number 3 using xhci_hcd

Tested-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: taehyun.cho <taehyun.cho@samsung.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Link: https://lore.kernel.org/r/20210106154625.2801030-1-lorenzo@google.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1505,7 +1505,7 @@ static const struct usb_gadget_driver co
 	.suspend	= configfs_composite_suspend,
 	.resume		= configfs_composite_resume,
 
-	.max_speed	= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER_PLUS,
 	.driver = {
 		.owner          = THIS_MODULE,
 		.name		= "configfs-gadget",
@@ -1545,7 +1545,7 @@ static struct config_group *gadgets_make
 	gi->composite.unbind = configfs_do_nothing;
 	gi->composite.suspend = NULL;
 	gi->composite.resume = NULL;
-	gi->composite.max_speed = USB_SPEED_SUPER;
+	gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
 
 	spin_lock_init(&gi->spinlock);
 	mutex_init(&gi->lock);

[PATCH 4.19 44/77] USB: cdc-acm: blacklist another IR Droid device

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 0ffc76539e6e8d28114f95ac25c167c37b5191b3 upstream.

This device is supported by the IR Toy driver.

Reported-by: Georgi Bakalski <georgi.bakalski@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201227134502.4548-2-sean@mess.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1939,6 +1939,10 @@ static const struct usb_device_id acm_id
 	{ USB_DEVICE(0x04d8, 0x0083),	/* Bootloader mode */
 	.driver_info = IGNORE_DEVICE,
 	},
+
+	{ USB_DEVICE(0x04d8, 0xf58b),
+	.driver_info = IGNORE_DEVICE,
+	},
 #endif
 
 	/*Samsung phone in firmware update mode */

[PATCH 4.19 45/77] USB: cdc-wdm: Fix use after free in service_outstanding_interrupt().

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

commit 5e5ff0b4b6bcb4d17b7a26ec8bcfc7dd4651684f upstream.

syzbot is reporting UAF at usb_submit_urb() [1], for
service_outstanding_interrupt() is not checking WDM_DISCONNECTING
before calling usb_submit_urb(). Close the race by doing same checks
wdm_read() does upon retry.

Also, while wdm_read() checks WDM_DISCONNECTING with desc->rlock held,
service_interrupt_work() does not hold desc->rlock. Thus, it is possible
that usb_submit_urb() is called from service_outstanding_interrupt() from
service_interrupt_work() after WDM_DISCONNECTING was set and kill_urbs()
 from wdm_disconnect() completed. Thus, move kill_urbs() in
wdm_disconnect() to after cancel_work_sync() (which makes sure that
service_interrupt_work() is no longer running) completed.

Although it seems to be safe to dereference desc->intf->dev in
service_outstanding_interrupt() even if WDM_DISCONNECTING was already set
because desc->rlock or cancel_work_sync() prevents wdm_disconnect() from
reaching list_del() before service_outstanding_interrupt() completes,
let's not emit error message if WDM_DISCONNECTING is set by
wdm_disconnect() while usb_submit_urb() is in progress.

[1] https://syzkaller.appspot.com/bug?extid=9e04e2df4a32fb661daf

Reported-by: syzbot <syzbot+9e04e2df4a32fb661daf@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/620e2ee0-b9a3-dbda-a25b-a93e0ed03ec5@i-love.sakura.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-wdm.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -465,13 +465,23 @@ static int service_outstanding_interrupt
 	if (!desc->resp_count || !--desc->resp_count)
 		goto out;
 
+	if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+		rv = -ENODEV;
+		goto out;
+	}
+	if (test_bit(WDM_RESETTING, &desc->flags)) {
+		rv = -EIO;
+		goto out;
+	}
+
 	set_bit(WDM_RESPONDING, &desc->flags);
 	spin_unlock_irq(&desc->iuspin);
 	rv = usb_submit_urb(desc->response, GFP_KERNEL);
 	spin_lock_irq(&desc->iuspin);
 	if (rv) {
-		dev_err(&desc->intf->dev,
-			"usb_submit_urb failed with result %d\n", rv);
+		if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+			dev_err(&desc->intf->dev,
+				"usb_submit_urb failed with result %d\n", rv);
 
 		/* make sure the next notification trigger a submit */
 		clear_bit(WDM_RESPONDING, &desc->flags);
@@ -1026,9 +1036,9 @@ static void wdm_disconnect(struct usb_in
 	wake_up_all(&desc->wait);
 	mutex_lock(&desc->rlock);
 	mutex_lock(&desc->wlock);
-	kill_urbs(desc);
 	cancel_work_sync(&desc->rxwork);
 	cancel_work_sync(&desc->service_outs_intr);
+	kill_urbs(desc);
 	mutex_unlock(&desc->wlock);
 	mutex_unlock(&desc->rlock);
 

[PATCH 4.19 46/77] usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

commit ce722da66d3e9384aa2de9d33d584ee154e5e157 upstream.

In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone
bit when the PHY vendor control access is done and clears it when the
application initiates a new transaction. The doc doesn't say anything
about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover
we've discovered that the VStsBsy flag can be cleared before the VStsDone
bit. So using the former as a signal of the PHY control registers
completion might be dangerous. Let's have the VStsDone flag utilized
instead then.

[1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller
    Databook, 2.70a, December 2013, p.388

Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Link: https://lore.kernel.org/r/20201210085008.13264-2-Sergey.Semin@baikalelectronics.ru
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc3/core.h |    1 +
 drivers/usb/dwc3/ulpi.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -272,6 +272,7 @@
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
 #define DWC3_GUSB2PHYACC_BUSY		BIT(23)
 #define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -24,7 +24,7 @@ static int dwc3_ulpi_busyloop(struct dwc
 
 	while (count--) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
-		if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+		if (reg & DWC3_GUSB2PHYACC_DONE)
 			return 0;
 		cpu_relax();
 	}

[PATCH 4.19 47/77] usb: chipidea: ci_hdrc_imx: add missing put_device() call in usbmisc_get_init_data()

[Greg Kroah-Hartman]

From: Yu Kuai <yukuai3@huawei.com>

commit 83a43ff80a566de8718dfc6565545a0080ec1fb5 upstream.

if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.

Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/chipidea/ci_hdrc_imx.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -128,9 +128,13 @@ static struct imx_usbmisc_data *usbmisc_
 	misc_pdev = of_find_device_by_node(args.np);
 	of_node_put(args.np);
 
-	if (!misc_pdev || !platform_get_drvdata(misc_pdev))
+	if (!misc_pdev)
 		return ERR_PTR(-EPROBE_DEFER);
 
+	if (!platform_get_drvdata(misc_pdev)) {
+		put_device(&misc_pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
 	data->dev = &misc_pdev->dev;
 
 	if (of_find_property(np, "disable-over-current", NULL))

[PATCH 4.19 48/77] USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set

[Greg Kroah-Hartman]

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream.

The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit
latency is too long") was constraining the xhci code not to allow U1/U2
sleep states if the latency to wake up from the U-states reached the
service interval of an periodic endpoint. This fix was not taking into
account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time
will be calculated and configured differently.

It checks for u1_params.mel/u2_params.mel as a limit. But the code could
decide to write another MEL into the hardware. This leads to broken
cases where not enough bandwidth is available for other devices:

usb 1-2: can't set config #1, error -28

This patch is fixing that case by checking for timeout_ns after the
wakeup time was calculated depending on the quirks.

Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4558,19 +4558,19 @@ static u16 xhci_calculate_u1_timeout(str
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
 	/* Prevent U1 if service interval is shorter than U1 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
-	else
-		timeout_ns = udev->u1_params.sel;
-
 	/* The U1 timeout is encoded in 1us intervals.
 	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
 	 */
@@ -4622,19 +4622,19 @@ static u16 xhci_calculate_u2_timeout(str
 {
 	unsigned long long timeout_ns;
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
 	/* Prevent U2 if service interval is shorter than U2 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
 			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
-	else
-		timeout_ns = udev->u2_params.sel;
-
 	/* The U2 timeout is encoded in 256us intervals */
 	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
 	/* If the necessary timeout value is bigger than what we can set in the

[PATCH 4.19 49/77] usb: usbip: vhci_hcd: protect shift size

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit 718bf42b119de652ebcc93655a1f33a9c0d04b3c upstream.

Fix shift out-of-bounds in vhci_hcd.c:

  UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41
  shift exponent 768 is too large for 32-bit type 'int'

Fixes: 03cd00d538a6 ("usbip: vhci-hcd: Set the vhci structure up to work")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/usbip/vhci_hcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -396,6 +396,8 @@ static int vhci_hub_control(struct usb_h
 		default:
 			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 					  wValue);
+			if (wValue >= 32)
+				goto error;
 			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
 			break;
 		}

[PATCH 4.19 50/77] usb: uas: Add PNY USB Portable SSD to unusual_uas

[Greg Kroah-Hartman]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

commit 96ebc9c871d8a28fb22aa758dd9188a4732df482 upstream.

Here's another variant PNY Pro Elite USB 3.1 Gen 2 portable SSD that
hangs and doesn't respond to ATA_1x pass-through commands. If it doesn't
support these commands, it should respond properly to the host. Add it
to the unusual uas list to be able to move forward with other
operations.

Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/2edc7af892d0913bf06f5b35e49ec463f03d5ed8.1609819418.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/storage/unusual_uas.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -91,6 +91,13 @@ UNUSUAL_DEV(0x152d, 0x0578, 0x0000, 0x99
 		US_FL_BROKEN_FUA),
 
 /* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
+UNUSUAL_DEV(0x154b, 0xf00b, 0x0000, 0x9999,
+		"PNY",
+		"Pro Elite SSD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Thinh Nguyen <thinhn@synopsys.com> */
 UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
 		"PNY",
 		"Pro Elite SSD",

[PATCH 4.19 51/77] USB: serial: iuu_phoenix: fix DMA from stack

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 54d0a3ab80f49f19ee916def62fe067596833403 upstream.

Stack-allocated buffers cannot be used for DMA (on all architectures) so
allocate the flush command buffer using kmalloc().

Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver")
Cc: stable <stable@vger.kernel.org>     # 2.6.25
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/iuu_phoenix.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -536,23 +536,29 @@ static int iuu_uart_flush(struct usb_ser
 	struct device *dev = &port->dev;
 	int i;
 	int status;
-	u8 rxcmd = IUU_UART_RX;
+	u8 *rxcmd;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 
 	if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0)
 		return -EIO;
 
+	rxcmd = kmalloc(1, GFP_KERNEL);
+	if (!rxcmd)
+		return -ENOMEM;
+
+	rxcmd[0] = IUU_UART_RX;
+
 	for (i = 0; i < 2; i++) {
-		status = bulk_immediate(port, &rxcmd, 1);
+		status = bulk_immediate(port, rxcmd, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_write error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		status = read_immediate(port, &priv->len, 1);
 		if (status != IUU_OPERATION_OK) {
 			dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-			return status;
+			goto out_free;
 		}
 
 		if (priv->len > 0) {
@@ -560,12 +566,16 @@ static int iuu_uart_flush(struct usb_ser
 			status = read_immediate(port, priv->buf, priv->len);
 			if (status != IUU_OPERATION_OK) {
 				dev_dbg(dev, "%s - uart_flush_read error\n", __func__);
-				return status;
+				goto out_free;
 			}
 		}
 	}
 	dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__);
 	iuu_led(port, 0, 0xF000, 0, 0xFF);
+
+out_free:
+	kfree(rxcmd);
+
 	return status;
 }
 

[PATCH 4.19 52/77] USB: serial: option: add LongSung M5710 module support

[Greg Kroah-Hartman]

From: Daniel Palmer <daniel@0x0f.com>

commit 0e2d6795e8dbe91c2f5473564c6b25d11df3778b upstream.

Add a device-id entry for the LongSung M5710 module.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2df3 ProdID=9d03 Rev= 1.00
S:  Manufacturer=Marvell
S:  Product=Mobile Composite Device Bus
S:  SerialNumber=<snip>
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
https://lore.kernel.org/r/20201227031716.1343300-1-daniel@0x0f.com
[ johan: drop id defines, only bind to vendor class ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2057,6 +2057,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff),			/* Fibocom NL678 series */
 	  .driver_info = RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) },			/* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
+	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) },			/* GosunCn GM500 ECM/NCM */

[PATCH 4.19 53/77] USB: serial: option: add Quectel EM160R-GL

[Greg Kroah-Hartman]

From: Bjørn Mork <bjorn@mork.no>

commit d6c1ddd938d84a1adef7e19e8efc10e1b4df5034 upstream.

New modem using ff/ff/30 for QCDM, ff/00/00 for  AT and NMEA,
and ff/ff/ff for RMNET/QMI.

T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0620 Rev= 4.09
S: Manufacturer=Quectel
S: Product=EM160R-GL
S: SerialNumber=e31cedc1
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Cc: stable@vger.kernel.org
Signed-off-by: Bjørn Mork <bjorn@mork.no>
[ johan: add model comment ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1117,6 +1117,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) },	/* EM160R-GL */
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

[PATCH 4.19 54/77] USB: yurex: fix control-URB timeout handling

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 372c93131998c0622304bed118322d2a04489e63 upstream.

Make sure to always cancel the control URB in write() so that it can be
reused after a timeout or spurious CMD_ACK.

Currently any further write requests after a timeout would fail after
triggering a WARN() in usb_submit_urb() when attempting to submit the
already active URB.

Reported-by: syzbot+e87ebe0f7913f71f2ea5@syzkaller.appspotmail.com
Fixes: 6bc235a2e24a ("USB: add driver for Meywa-Denki & Kayac YUREX")
Cc: stable <stable@vger.kernel.org>     # 2.6.37
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/misc/yurex.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -497,6 +497,9 @@ static ssize_t yurex_write(struct file *
 		timeout = schedule_timeout(YUREX_WRITE_TIMEOUT);
 	finish_wait(&dev->waitq, &wait);
 
+	/* make sure URB is idle after timeout or (spurious) CMD_ACK */
+	usb_kill_urb(dev->cntl_urb);
+
 	mutex_unlock(&dev->io_mutex);
 
 	if (retval < 0) {

[PATCH 4.19 55/77] USB: usblp: fix DMA to stack

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 020a1f453449294926ca548d8d5ca970926e8dfd upstream.

Stack-allocated buffers cannot be used for DMA (on all architectures).

Replace the HP-channel macro with a helper function that allocates a
dedicated transfer buffer so that it can continue to be used with
arguments from the stack.

Note that the buffer is cleared on allocation as usblp_ctrl_msg()
returns success also on short transfers (the buffer is only used for
debugging).

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/usblp.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/drivers/usb/class/usblp.c
+++ b/drivers/usb/class/usblp.c
@@ -274,8 +274,25 @@ static int usblp_ctrl_msg(struct usblp *
 #define usblp_reset(usblp)\
 	usblp_ctrl_msg(usblp, USBLP_REQ_RESET, USB_TYPE_CLASS, USB_DIR_OUT, USB_RECIP_OTHER, 0, NULL, 0)
 
-#define usblp_hp_channel_change_request(usblp, channel, buffer) \
-	usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST, USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE, channel, buffer, 1)
+static int usblp_hp_channel_change_request(struct usblp *usblp, int channel, u8 *new_channel)
+{
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usblp_ctrl_msg(usblp, USBLP_REQ_HP_CHANNEL_CHANGE_REQUEST,
+			USB_TYPE_VENDOR, USB_DIR_IN, USB_RECIP_INTERFACE,
+			channel, buf, 1);
+	if (ret == 0)
+		*new_channel = buf[0];
+
+	kfree(buf);
+
+	return ret;
+}
 
 /*
  * See the description for usblp_select_alts() below for the usage

[PATCH 4.19 56/77] ALSA: usb-audio: Fix UBSAN warnings for MIDI jacks

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c06ccf3ebb7503706ea49fd248e709287ef385a3 upstream.

The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.

Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).

Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/midi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1890,6 +1890,8 @@ static int snd_usbmidi_get_ms_info(struc
 		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
 		if (!ms_ep)
 			continue;
+		if (ms_ep->bNumEmbMIDIJack > 0x10)
+			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
 				if (++epidx >= MIDI_MAX_ENDPOINTS) {
@@ -2142,6 +2144,8 @@ static int snd_usbmidi_detect_roland(str
 		    cs_desc[1] == USB_DT_CS_INTERFACE &&
 		    cs_desc[2] == 0xf1 &&
 		    cs_desc[3] == 0x02) {
+			if (cs_desc[4] > 0x10 || cs_desc[5] > 0x10)
+				continue;
 			endpoint->in_cables  = (1 << cs_desc[4]) - 1;
 			endpoint->out_cables = (1 << cs_desc[5]) - 1;
 			return snd_usbmidi_detect_endpoints(umidi, endpoint, 1);

[PATCH 4.19 57/77] usb: gadget: select CONFIG_CRC32

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit d7889c2020e08caab0d7e36e947f642d91015bd0 upstream.

Without crc32 support, this driver fails to link:

arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_eem.o: in function `eem_unwrap':
f_eem.c:(.text+0x11cc): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/usb/gadget/function/f_ncm.o:f_ncm.c:(.text+0x1e40):
more undefined references to `crc32_le' follow

Fixes: 6d3865f9d41f ("usb: gadget: NCM: Add transmit multi-frame.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210103214224.1996535-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -264,6 +264,7 @@ config USB_CONFIGFS_NCM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_NCM
+	select CRC32
 	help
 	  NCM is an advanced protocol for Ethernet encapsulation, allows
 	  grouping of several ethernet frames into one USB transfer and
@@ -313,6 +314,7 @@ config USB_CONFIGFS_EEM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_EEM
+	select CRC32
 	help
 	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
 	  and therefore can be supported by more hardware.  Technically ECM and

[PATCH 4.19 58/77] usb: gadget: f_uac2: reset wMaxPacketSize

[Greg Kroah-Hartman]

From: Jerome Brunet <jbrunet@baylibre.com>

commit 9389044f27081d6ec77730c36d5bf9a1288bcda2 upstream.

With commit 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
wMaxPacketSize is computed dynamically but the value is never reset.

Because of this, the actual maximum packet size can only decrease each time
the audio gadget is instantiated.

Reset the endpoint maximum packet size and mark wMaxPacketSize as dynamic
to solve the problem.

Fixes: 913e4a90b6f9 ("usb: gadget: f_uac2: finalize wMaxPacketSize according to bandwidth")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201221173531.215169-2-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_uac2.c |   69 +++++++++++++++++++++++++++--------
 1 file changed, 55 insertions(+), 14 deletions(-)

--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -275,7 +275,7 @@ static struct usb_endpoint_descriptor fs
 
 	.bEndpointAddress = USB_DIR_OUT,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -284,7 +284,7 @@ static struct usb_endpoint_descriptor hs
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -352,7 +352,7 @@ static struct usb_endpoint_descriptor fs
 
 	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -361,7 +361,7 @@ static struct usb_endpoint_descriptor hs
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -448,12 +448,28 @@ struct cntrl_range_lay3 {
 	__le32	dRES;
 } __packed;
 
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 	struct usb_endpoint_descriptor *ep_desc,
-	unsigned int factor, bool is_playback)
+	enum usb_device_speed speed, bool is_playback)
 {
 	int chmask, srate, ssize;
-	u16 max_packet_size;
+	u16 max_size_bw, max_size_ep;
+	unsigned int factor;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		max_size_ep = 1023;
+		factor = 1000;
+		break;
+
+	case USB_SPEED_HIGH:
+		max_size_ep = 1024;
+		factor = 8000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
 	if (is_playback) {
 		chmask = uac2_opts->p_chmask;
@@ -465,10 +481,12 @@ static void set_ep_max_packet_size(const
 		ssize = uac2_opts->c_ssize;
 	}
 
-	max_packet_size = num_channels(chmask) * ssize *
+	max_size_bw = num_channels(chmask) * ssize *
 		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
-	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
-				le16_to_cpu(ep_desc->wMaxPacketSize)));
+	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+						    max_size_ep));
+
+	return 0;
 }
 
 static int
@@ -551,10 +569,33 @@ afunc_bind(struct usb_configuration *cfg
 	uac2->as_in_alt = 0;
 
 	/* Calculate wMaxPacketSize according to audio bandwidth */
-	set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
-	set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
-	set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
-	set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
 
 	agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
 	if (!agdev->out_ep) {

[PATCH 4.19 59/77] usb: gadget: function: printer: Fix a memory leak for interface descriptor

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

commit 2cc332e4ee4febcbb685e2962ad323fe4b3b750a upstream.

When printer driver is loaded, the printer_func_bind function is called, in
this function, the interface descriptor be allocated memory, if after that,
the error occurred, the interface descriptor memory need to be free.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Link: https://lore.kernel.org/r/20201210020148.6691-1-qiang.zhang@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_printer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1126,6 +1126,7 @@ fail_tx_reqs:
 		printer_req_free(dev->in_ep, req);
 	}
 
+	usb_free_all_descriptors(f);
 	return ret;
 
 }

[PATCH 4.19 60/77] usb: gadget: u_ether: Fix MTU size mismatch with RX packet size

[Greg Kroah-Hartman]

From: Manish Narani <manish.narani@xilinx.com>

commit 0a88fa221ce911c331bf700d2214c5b2f77414d3 upstream.

Fix the MTU size issue with RX packet size as the host sends the packet
with extra bytes containing ethernet header. This causes failure when
user sets the MTU size to the maximum i.e. 15412. In this case the
ethernet packet received will be of length 15412 plus the ethernet header
length. This patch fixes the issue where there is a check that RX packet
length must not be more than max packet length.

Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames")
Signed-off-by: Manish Narani <manish.narani@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/u_ether.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -45,9 +45,10 @@
 #define UETH__VERSION	"29-May-2008"
 
 /* Experiments show that both Linux and Windows hosts allow up to 16k
- * frame sizes. Set the max size to 15k+52 to prevent allocating 32k
+ * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k
  * blocks and still have efficient handling. */
-#define GETHER_MAX_ETH_FRAME_LEN 15412
+#define GETHER_MAX_MTU_SIZE 15412
+#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
 
 struct eth_dev {
 	/* lock is held while accessing port_usb
@@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
@@ -848,7 +849,7 @@ struct net_device *gether_setup_name_def
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	return net;
 }

[PATCH 4.19 61/77] USB: gadget: legacy: fix return error code in acm_ms_bind()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit c91d3a6bcaa031f551ba29a496a8027b31289464 upstream.

If usb_otg_descriptor_alloc() failed, it need return ENOMEM.

Fixes: 578aa8a2b12c ("usb: gadget: acm_ms: allocate and init otg descriptor by otg capabilities")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201117092955.4102785-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/legacy/acm_ms.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -203,8 +203,10 @@ static int acm_ms_bind(struct usb_compos
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail_string_ids;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

[PATCH 4.19 62/77] usb: gadget: Fix spinlock lockup on usb_function_deactivate

[Greg Kroah-Hartman]

From: Sriharsha Allenki <sallenki@codeaurora.org>

commit 5cc35c224a80aa5a5a539510ef049faf0d6ed181 upstream.

There is a spinlock lockup as part of composite_disconnect
when it tries to acquire cdev->lock as part of usb_gadget_deactivate.
This is because the usb_gadget_deactivate is called from
usb_function_deactivate with the same spinlock held.

This would result in the below call stack and leads to stall.

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:     3-...0: (1 GPs behind) idle=162/1/0x4000000000000000
softirq=10819/10819 fqs=2356
 (detected by 2, t=5252 jiffies, g=20129, q=3770)
 Task dump for CPU 3:
 task:uvc-gadget_wlhe state:R  running task     stack:    0 pid:  674 ppid:
 636 flags:0x00000202
 Call trace:
  __switch_to+0xc0/0x170
  _raw_spin_lock_irqsave+0x84/0xb0
  composite_disconnect+0x28/0x78
  configfs_composite_disconnect+0x68/0x70
  usb_gadget_disconnect+0x10c/0x128
  usb_gadget_deactivate+0xd4/0x108
  usb_function_deactivate+0x6c/0x80
  uvc_function_disconnect+0x20/0x58
  uvc_v4l2_release+0x30/0x88
  v4l2_release+0xbc/0xf0
  __fput+0x7c/0x230
  ____fput+0x14/0x20
  task_work_run+0x88/0x140
  do_notify_resume+0x240/0x6f0
  work_pending+0x8/0x200

Fix this by doing an unlock on cdev->lock before the usb_gadget_deactivate
call from usb_function_deactivate.

The same lockup can happen in the usb_gadget_activate path. Fix that path
as well.

Reported-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/composite.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_f
 
 	spin_lock_irqsave(&cdev->lock, flags);
 
-	if (cdev->deactivations == 0)
+	if (cdev->deactivations == 0) {
+		spin_unlock_irqrestore(&cdev->lock, flags);
 		status = usb_gadget_deactivate(cdev->gadget);
+		spin_lock_irqsave(&cdev->lock, flags);
+	}
 	if (status == 0)
 		cdev->deactivations++;
 
@@ -424,8 +427,11 @@ int usb_function_activate(struct usb_fun
 		status = -EINVAL;
 	else {
 		cdev->deactivations--;
-		if (cdev->deactivations == 0)
+		if (cdev->deactivations == 0) {
+			spin_unlock_irqrestore(&cdev->lock, flags);
 			status = usb_gadget_activate(cdev->gadget);
+			spin_lock_irqsave(&cdev->lock, flags);
+		}
 	}
 
 	spin_unlock_irqrestore(&cdev->lock, flags);

[PATCH 4.19 63/77] usb: gadget: configfs: Preserve function ordering after bind failure

[Greg Kroah-Hartman]

From: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>

commit 6cd0fe91387917be48e91385a572a69dfac2f3f7 upstream.

When binding the ConfigFS gadget to a UDC, the functions in each
configuration are added in list order. However, if usb_add_function()
fails, the failed function is put back on its configuration's
func_list and purge_configs_funcs() is called to further clean up.

purge_configs_funcs() iterates over the configurations and functions
in forward order, calling unbind() on each of the previously added
functions. But after doing so, each function gets moved to the
tail of the configuration's func_list. This results in reshuffling
the original order of the functions within a configuration such
that the failed function now appears first even though it may have
originally appeared in the middle or even end of the list. At this
point if the ConfigFS gadget is attempted to re-bind to the UDC,
the functions will be added in a different order than intended,
with the only recourse being to remove and relink the functions all
over again.

An example of this as follows:

ln -s functions/mass_storage.0 configs/c.1
ln -s functions/ncm.0 configs/c.1
ln -s functions/ffs.adb configs/c.1	# oops, forgot to start adbd
echo "<udc device>" > UDC		# fails
start adbd
echo "<udc device>" > UDC		# now succeeds, but...
					# bind order is
					# "ADB", mass_storage, ncm

[30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30133.119974] using random self ethernet address
[30133.120002] using random host ethernet address
[30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26
[30133.140015] usb0: MAC 6e:28:7e:42:66:6a
[30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19
[30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200
[30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00
[30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19
[30136.661933] init: starting service 'adbd'...
[30136.700126] read descriptors
[30136.700413] read strings
[30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30138.575631] using random self ethernet address
[30138.575660] using random host ethernet address
[30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8
[30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0
[30138.791490] configfs-gadget gadget: super-speed config #1: c

Fix this by reversing the iteration order of the functions in
purge_config_funcs() when unbinding them, and adding them back to
the config's func_list at the head instead of the tail. This
ensures that we unbind and unwind back to the original list order.

Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1217,9 +1217,9 @@ static void purge_configs_funcs(struct g
 
 		cfg = container_of(c, struct config_usb_cfg, c);
 
-		list_for_each_entry_safe(f, tmp, &c->functions, list) {
+		list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
 
-			list_move_tail(&f->list, &cfg->func_list);
+			list_move(&f->list, &cfg->func_list);
 			if (f->unbind) {
 				dev_dbg(&gi->cdev.gadget->dev,
 					"unbind function '%s'/%p\n",

[PATCH 4.19 64/77] usb: gadget: configfs: Fix use-after-free issue with udc_name

[Greg Kroah-Hartman]

From: Eddie Hung <eddie.hung@mediatek.com>

commit 64e6bbfff52db4bf6785fab9cffab850b2de6870 upstream.

There is a use-after-free issue, if access udc_name
in function gadget_dev_desc_UDC_store after another context
free udc_name in function unregister_gadget.

Context 1:
gadget_dev_desc_UDC_store()->unregister_gadget()->
free udc_name->set udc_name to NULL

Context 2:
gadget_dev_desc_UDC_show()-> access udc_name

Call trace:
dump_backtrace+0x0/0x340
show_stack+0x14/0x1c
dump_stack+0xe4/0x134
print_address_description+0x78/0x478
__kasan_report+0x270/0x2ec
kasan_report+0x10/0x18
__asan_report_load1_noabort+0x18/0x20
string+0xf4/0x138
vsnprintf+0x428/0x14d0
sprintf+0xe4/0x12c
gadget_dev_desc_UDC_show+0x54/0x64
configfs_read_file+0x210/0x3a0
__vfs_read+0xf0/0x49c
vfs_read+0x130/0x2b4
SyS_read+0x114/0x208
el0_svc_naked+0x34/0x38

Add mutex_lock to protect this kind of scenario.

Signed-off-by: Eddie Hung <eddie.hung@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/configfs.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -233,9 +233,16 @@ static ssize_t gadget_dev_desc_bcdUSB_st
 
 static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
 {
-	char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+	struct gadget_info *gi = to_gadget_info(item);
+	char *udc_name;
+	int ret;
 
-	return sprintf(page, "%s\n", udc_name ?: "");
+	mutex_lock(&gi->lock);
+	udc_name = gi->composite.gadget_driver.udc_name;
+	ret = sprintf(page, "%s\n", udc_name ?: "");
+	mutex_unlock(&gi->lock);
+
+	return ret;
 }
 
 static int unregister_gadget(struct gadget_info *gi)

[PATCH 4.19 65/77] USB: serial: keyspan_pda: remove unused variable

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

Remove an unused variable which was mistakingly left by commit
37faf5061541 ("USB: serial: keyspan_pda: fix write-wakeup
use-after-free") and only removed by a later change.

This is needed to suppress a W=1 warning about the unused variable in
the stable trees that the build bots triggers.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/keyspan_pda.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -555,10 +555,8 @@ exit:
 static void keyspan_pda_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct keyspan_pda_private *priv;
 
 	set_bit(0, &port->write_urbs_free);
-	priv = usb_get_serial_port_data(port);
 
 	/* queue up a wakeup at scheduler time */
 	usb_serial_port_softint(port);

[PATCH 4.19 66/77] x86/mm: Fix leak of pmd ptlock

[Greg Kroah-Hartman]

From: Dan Williams <dan.j.williams@intel.com>

commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream.

Commit

  28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")

introduced a new location where a pmd was released, but neglected to
run the pmd page destructor. In fact, this happened previously for a
different pmd release path and was fixed by commit:

  c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables").

This issue was hidden until recently because the failure mode is silent,
but commit:

  b2b29d6d0119 ("mm: account PMD tables like PTE tables")

turns the failure mode into this signature:

 BUG: Bad page state in process lt-pmem-ns  pfn:15943d
 page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d
 flags: 0xaffff800000000()
 raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000
 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000
 page dumped because: nonzero mapcount
 [..]
  dump_stack+0x8b/0xb0
  bad_page.cold+0x63/0x94
  free_pcp_prepare+0x224/0x270
  free_unref_page+0x18/0xd0
  pud_free_pmd_page+0x146/0x160
  ioremap_pud_range+0xe3/0x350
  ioremap_page_range+0x108/0x160
  __ioremap_caller.constprop.0+0x174/0x2b0
  ? memremap+0x7a/0x110
  memremap+0x7a/0x110
  devm_memremap+0x53/0xa0
  pmem_attach_disk+0x4ed/0x530 [nd_pmem]
  ? __devm_release_region+0x52/0x80
  nvdimm_bus_probe+0x85/0x210 [libnvdimm]

Given this is a repeat occurrence it seemed prudent to look for other
places where this destructor might be missing and whether a better
helper is needed. try_to_free_pmd_page() looks like a candidate, but
testing with setting up and tearing down pmd mappings via the dax unit
tests is thus far not triggering the failure.

As for a better helper pmd_free() is close, but it is a messy fit
due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call
paravirt_tlb_remove_table() instead of free_page(), so open-coded
pgtable_pmd_page_dtor() seems the best way forward for now.

Debugged together with Matthew Wilcox <willy@infradead.org>.

Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pgtable.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -838,6 +838,8 @@ int pud_free_pmd_page(pud_t *pud, unsign
 	}
 
 	free_page((unsigned long)pmd_sv);
+
+	pgtable_pmd_page_dtor(virt_to_page(pmd));
 	free_page((unsigned long)pmd);
 
 	return 1;

[PATCH 4.19 67/77] ALSA: hda/via: Fix runtime PM for Clevo W35xSS

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 4bfd6247fa9164c8e193a55ef9c0ea3ee22f82d8 upstream.

Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume.  This
was worked around by disabling the default runtime PM via a denylist
entry.  Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited.  The
result was that disabling power_save_node feature suffices for the
runtime PM problem.

This patch implements the disablement of power_save_node feature in
VIA codec for the device.  It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.

Fixes: b529ef2464ad ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    2 --
 sound/pci/hda/patch_via.c |   13 +++++++++++++
 2 files changed, 13 insertions(+), 2 deletions(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2328,8 +2328,6 @@ static struct snd_pci_quirk power_save_b
 	SND_PCI_QUIRK(0x1849, 0x7662, "Asrock H81M-HDS", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
 	SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0),
-	/* https://bugzilla.redhat.com/show_bug.cgi?id=1581607 */
-	SND_PCI_QUIRK(0x1558, 0x3501, "Clevo W35xSS_370SS", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
 	SND_PCI_QUIRK(0x1558, 0x6504, "Clevo W65_67SB", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1015,6 +1015,7 @@ static const struct hda_verb vt1802_init
 enum {
 	VIA_FIXUP_INTMIC_BOOST,
 	VIA_FIXUP_ASUS_G75,
+	VIA_FIXUP_POWER_SAVE,
 };
 
 static void via_fixup_intmic_boost(struct hda_codec *codec,
@@ -1024,6 +1025,13 @@ static void via_fixup_intmic_boost(struc
 		override_mic_boost(codec, 0x30, 0, 2, 40);
 }
 
+static void via_fixup_power_save(struct hda_codec *codec,
+				 const struct hda_fixup *fix, int action)
+{
+	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+		codec->power_save_node = 0;
+}
+
 static const struct hda_fixup via_fixups[] = {
 	[VIA_FIXUP_INTMIC_BOOST] = {
 		.type = HDA_FIXUP_FUNC,
@@ -1038,11 +1046,16 @@ static const struct hda_fixup via_fixups
 			{ }
 		}
 	},
+	[VIA_FIXUP_POWER_SAVE] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = via_fixup_power_save,
+	},
 };
 
 static const struct snd_pci_quirk vt2002p_fixups[] = {
 	SND_PCI_QUIRK(0x1043, 0x1487, "Asus G75", VIA_FIXUP_ASUS_G75),
 	SND_PCI_QUIRK(0x1043, 0x8532, "Asus X202E", VIA_FIXUP_INTMIC_BOOST),
+	SND_PCI_QUIRK(0x1558, 0x3501, "Clevo W35xSS_370SS", VIA_FIXUP_POWER_SAVE),
 	{}
 };
 

[PATCH 4.19 68/77] ALSA: hda/conexant: add a new hda codec CX11970

[Greg Kroah-Hartman]

From: bo liu <bo.liu@senarytech.com>

commit 744a11abc56405c5a106e63da30a941b6d27f737 upstream.

The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.

[ Minor coding style fix by tiwai ]

Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -1088,6 +1088,7 @@ static int patch_conexant_auto(struct hd
 static const struct hda_device_id snd_hda_id_conexant[] = {
 	HDA_CODEC_ENTRY(0x14f11f86, "CX8070", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f12008, "CX8200", patch_conexant_auto),
+	HDA_CODEC_ENTRY(0x14f120d0, "CX11970", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15045, "CX20549 (Venice)", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15047, "CX20551 (Waikiki)", patch_conexant_auto),
 	HDA_CODEC_ENTRY(0x14f15051, "CX20561 (Hermosa)", patch_conexant_auto),

[PATCH 4.19 69/77] ALSA: hda/realtek - Fix speaker volume control on Lenovo C940

[Greg Kroah-Hartman]

From: Kailang Yang <kailang@realtek.com>

commit f86de9b1c0663b0a3ca2dcddec9aa910ff0fbf2c upstream.

Cannot adjust speaker's volume on Lenovo C940.
Applying the alc298_fixup_speaker_volume function can fix the issue.

[ Additional note: C940 has I2S amp for the speaker and this needs the
  same initialization as Dell machines.
  The patch was slightly modified so that the quirk entry is moved
  next to the corresponding Dell quirk entry. -- tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ea25b4e5c468491aa2e9d6cb1f2fced3@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5774,6 +5774,7 @@ enum {
 	ALC221_FIXUP_HP_FRONT_MIC,
 	ALC292_FIXUP_TPT460,
 	ALC298_FIXUP_SPK_VOLUME,
+	ALC298_FIXUP_LENOVO_SPK_VOLUME,
 	ALC256_FIXUP_DELL_INSPIRON_7559_SUBWOOFER,
 	ALC269_FIXUP_ATIV_BOOK_8,
 	ALC221_FIXUP_HP_MIC_NO_PRESENCE,
@@ -6545,6 +6546,10 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC298_FIXUP_DELL_AIO_MIC_NO_PRESENCE,
 	},
+	[ALC298_FIXUP_LENOVO_SPK_VOLUME] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc298_fixup_speaker_volume,
+	},
 	[ALC295_FIXUP_DISABLE_DAC3] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc295_fixup_disable_dac3,
@@ -7220,6 +7225,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x17aa, 0x3151, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3176, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3178, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
+	SND_PCI_QUIRK(0x17aa, 0x3818, "Lenovo C940", ALC298_FIXUP_LENOVO_SPK_VOLUME),
 	SND_PCI_QUIRK(0x17aa, 0x3902, "Lenovo E50-80", ALC269_FIXUP_DMIC_THINKPAD_ACPI),
 	SND_PCI_QUIRK(0x17aa, 0x3977, "IdeaPad S210", ALC283_FIXUP_INT_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x3978, "Lenovo B50-70", ALC269_FIXUP_DMIC_THINKPAD_ACPI),

[PATCH 4.19 70/77] btrfs: send: fix wrong file path when there is an inode with a pending rmdir

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 0b3f407e6728d990ae1630a02c7b952c21c288d3 upstream.

When doing an incremental send, if we have a new inode that happens to
have the same number that an old directory inode had in the base snapshot
and that old directory has a pending rmdir operation, we end up computing
a wrong path for the new inode, causing the receiver to fail.

Example reproducer:

  $ cat test-send-rmdir.sh
  #!/bin/bash

  DEV=/dev/sdi
  MNT=/mnt/sdi

  mkfs.btrfs -f $DEV >/dev/null
  mount $DEV $MNT

  mkdir $MNT/dir
  touch $MNT/dir/file1
  touch $MNT/dir/file2
  touch $MNT/dir/file3

  # Filesystem looks like:
  #
  # .                                     (ino 256)
  # |----- dir/                           (ino 257)
  #         |----- file1                  (ino 258)
  #         |----- file2                  (ino 259)
  #         |----- file3                  (ino 260)
  #

  btrfs subvolume snapshot -r $MNT $MNT/snap1
  btrfs send -f /tmp/snap1.send $MNT/snap1

  # Now remove our directory and all its files.
  rm -fr $MNT/dir

  # Unmount the filesystem and mount it again. This is to ensure that
  # the next inode that is created ends up with the same inode number
  # that our directory "dir" had, 257, which is the first free "objectid"
  # available after mounting again the filesystem.
  umount $MNT
  mount $DEV $MNT

  # Now create a new file (it could be a directory as well).
  touch $MNT/newfile

  # Filesystem now looks like:
  #
  # .                                     (ino 256)
  # |----- newfile                        (ino 257)
  #

  btrfs subvolume snapshot -r $MNT $MNT/snap2
  btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2

  # Now unmount the filesystem, create a new one, mount it and try to apply
  # both send streams to recreate both snapshots.
  umount $DEV

  mkfs.btrfs -f $DEV >/dev/null

  mount $DEV $MNT

  btrfs receive -f /tmp/snap1.send $MNT
  btrfs receive -f /tmp/snap2.send $MNT

  umount $MNT

When running the test, the receive operation for the incremental stream
fails:

  $ ./test-send-rmdir.sh
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
  At subvol /mnt/sdi/snap1
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
  At subvol /mnt/sdi/snap2
  At subvol snap1
  At snapshot snap2
  ERROR: chown o257-9-0 failed: No such file or directory

So fix this by tracking directories that have a pending rmdir by inode
number and generation number, instead of only inode number.

A test case for fstests follows soon.

Reported-by: Massimo B. <massimo.b@gmx.net>
Tested-by: Massimo B. <massimo.b@gmx.net>
Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685.camel@gmx.net/
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/send.c |   49 +++++++++++++++++++++++++++++++------------------
 1 file changed, 31 insertions(+), 18 deletions(-)

--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -238,6 +238,7 @@ struct waiting_dir_move {
 	 * after this directory is moved, we can try to rmdir the ino rmdir_ino.
 	 */
 	u64 rmdir_ino;
+	u64 rmdir_gen;
 	bool orphanized;
 };
 
@@ -308,7 +309,7 @@ static int is_waiting_for_move(struct se
 static struct waiting_dir_move *
 get_waiting_dir_move(struct send_ctx *sctx, u64 ino);
 
-static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino);
+static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino, u64 gen);
 
 static int need_send_hole(struct send_ctx *sctx)
 {
@@ -2304,7 +2305,7 @@ static int get_cur_path(struct send_ctx
 
 		fs_path_reset(name);
 
-		if (is_waiting_for_rm(sctx, ino)) {
+		if (is_waiting_for_rm(sctx, ino, gen)) {
 			ret = gen_unique_name(sctx, ino, gen, name);
 			if (ret < 0)
 				goto out;
@@ -2863,8 +2864,8 @@ out:
 	return ret;
 }
 
-static struct orphan_dir_info *
-add_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino)
+static struct orphan_dir_info *add_orphan_dir_info(struct send_ctx *sctx,
+						   u64 dir_ino, u64 dir_gen)
 {
 	struct rb_node **p = &sctx->orphan_dirs.rb_node;
 	struct rb_node *parent = NULL;
@@ -2873,20 +2874,23 @@ add_orphan_dir_info(struct send_ctx *sct
 	while (*p) {
 		parent = *p;
 		entry = rb_entry(parent, struct orphan_dir_info, node);
-		if (dir_ino < entry->ino) {
+		if (dir_ino < entry->ino)
 			p = &(*p)->rb_left;
-		} else if (dir_ino > entry->ino) {
+		else if (dir_ino > entry->ino)
 			p = &(*p)->rb_right;
-		} else {
+		else if (dir_gen < entry->gen)
+			p = &(*p)->rb_left;
+		else if (dir_gen > entry->gen)
+			p = &(*p)->rb_right;
+		else
 			return entry;
-		}
 	}
 
 	odi = kmalloc(sizeof(*odi), GFP_KERNEL);
 	if (!odi)
 		return ERR_PTR(-ENOMEM);
 	odi->ino = dir_ino;
-	odi->gen = 0;
+	odi->gen = dir_gen;
 	odi->last_dir_index_offset = 0;
 
 	rb_link_node(&odi->node, parent, p);
@@ -2894,8 +2898,8 @@ add_orphan_dir_info(struct send_ctx *sct
 	return odi;
 }
 
-static struct orphan_dir_info *
-get_orphan_dir_info(struct send_ctx *sctx, u64 dir_ino)
+static struct orphan_dir_info *get_orphan_dir_info(struct send_ctx *sctx,
+						   u64 dir_ino, u64 gen)
 {
 	struct rb_node *n = sctx->orphan_dirs.rb_node;
 	struct orphan_dir_info *entry;
@@ -2906,15 +2910,19 @@ get_orphan_dir_info(struct send_ctx *sct
 			n = n->rb_left;
 		else if (dir_ino > entry->ino)
 			n = n->rb_right;
+		else if (gen < entry->gen)
+			n = n->rb_left;
+		else if (gen > entry->gen)
+			n = n->rb_right;
 		else
 			return entry;
 	}
 	return NULL;
 }
 
-static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino)
+static int is_waiting_for_rm(struct send_ctx *sctx, u64 dir_ino, u64 gen)
 {
-	struct orphan_dir_info *odi = get_orphan_dir_info(sctx, dir_ino);
+	struct orphan_dir_info *odi = get_orphan_dir_info(sctx, dir_ino, gen);
 
 	return odi != NULL;
 }
@@ -2959,7 +2967,7 @@ static int can_rmdir(struct send_ctx *sc
 	key.type = BTRFS_DIR_INDEX_KEY;
 	key.offset = 0;
 
-	odi = get_orphan_dir_info(sctx, dir);
+	odi = get_orphan_dir_info(sctx, dir, dir_gen);
 	if (odi)
 		key.offset = odi->last_dir_index_offset;
 
@@ -2990,7 +2998,7 @@ static int can_rmdir(struct send_ctx *sc
 
 		dm = get_waiting_dir_move(sctx, loc.objectid);
 		if (dm) {
-			odi = add_orphan_dir_info(sctx, dir);
+			odi = add_orphan_dir_info(sctx, dir, dir_gen);
 			if (IS_ERR(odi)) {
 				ret = PTR_ERR(odi);
 				goto out;
@@ -2998,12 +3006,13 @@ static int can_rmdir(struct send_ctx *sc
 			odi->gen = dir_gen;
 			odi->last_dir_index_offset = found_key.offset;
 			dm->rmdir_ino = dir;
+			dm->rmdir_gen = dir_gen;
 			ret = 0;
 			goto out;
 		}
 
 		if (loc.objectid > send_progress) {
-			odi = add_orphan_dir_info(sctx, dir);
+			odi = add_orphan_dir_info(sctx, dir, dir_gen);
 			if (IS_ERR(odi)) {
 				ret = PTR_ERR(odi);
 				goto out;
@@ -3043,6 +3052,7 @@ static int add_waiting_dir_move(struct s
 		return -ENOMEM;
 	dm->ino = ino;
 	dm->rmdir_ino = 0;
+	dm->rmdir_gen = 0;
 	dm->orphanized = orphanized;
 
 	while (*p) {
@@ -3188,7 +3198,7 @@ static int path_loop(struct send_ctx *sc
 	while (ino != BTRFS_FIRST_FREE_OBJECTID) {
 		fs_path_reset(name);
 
-		if (is_waiting_for_rm(sctx, ino))
+		if (is_waiting_for_rm(sctx, ino, gen))
 			break;
 		if (is_waiting_for_move(sctx, ino)) {
 			if (*ancestor_ino == 0)
@@ -3228,6 +3238,7 @@ static int apply_dir_move(struct send_ct
 	u64 parent_ino, parent_gen;
 	struct waiting_dir_move *dm = NULL;
 	u64 rmdir_ino = 0;
+	u64 rmdir_gen;
 	u64 ancestor;
 	bool is_orphan;
 	int ret;
@@ -3242,6 +3253,7 @@ static int apply_dir_move(struct send_ct
 	dm = get_waiting_dir_move(sctx, pm->ino);
 	ASSERT(dm);
 	rmdir_ino = dm->rmdir_ino;
+	rmdir_gen = dm->rmdir_gen;
 	is_orphan = dm->orphanized;
 	free_waiting_dir_move(sctx, dm);
 
@@ -3278,6 +3290,7 @@ static int apply_dir_move(struct send_ct
 			dm = get_waiting_dir_move(sctx, pm->ino);
 			ASSERT(dm);
 			dm->rmdir_ino = rmdir_ino;
+			dm->rmdir_gen = rmdir_gen;
 		}
 		goto out;
 	}
@@ -3296,7 +3309,7 @@ static int apply_dir_move(struct send_ct
 		struct orphan_dir_info *odi;
 		u64 gen;
 
-		odi = get_orphan_dir_info(sctx, rmdir_ino);
+		odi = get_orphan_dir_info(sctx, rmdir_ino, rmdir_gen);
 		if (!odi) {
 			/* already deleted */
 			goto finish;

[PATCH 4.19 71/77] Revert "device property: Keep secondary firmware node secondary by type"

[Greg Kroah-Hartman]

From: Bard Liao <yung-chuan.liao@linux.intel.com>

commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream.

While commit d5dcce0c414f ("device property: Keep secondary firmware
node secondary by type") describes everything correct in its commit
message, the change it made does the opposite and original commit
c15e1bdda436 ("device property: Fix the secondary firmware node handling
in set_primary_fwnode()") was fully correct.

Revert the former one here and improve documentation in the next patch.

Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -3349,7 +3349,7 @@ void set_primary_fwnode(struct device *d
 		if (fwnode_is_primary(fn)) {
 			dev->fwnode = fn->secondary;
 			if (!(parent && fn == parent->fwnode))
-				fn->secondary = ERR_PTR(-ENODEV);
+				fn->secondary = NULL;
 		} else {
 			dev->fwnode = NULL;
 		}

[PATCH 4.19 72/77] xen/pvh: correctly setup the PV EFI interface for dom0

[Greg Kroah-Hartman]

From: Roger Pau Monne <roger.pau@citrix.com>

commit 72813bfbf0276a97c82af038efb5f02dcdd9e310 upstream.

This involves initializing the boot params EFI related fields and the
efi global variable.

Without this fix a PVH dom0 doesn't detect when booted from EFI, and
thus doesn't support accessing any of the EFI related data.

Reported-by: PGNet Dev <pgnet.dev@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jinoh Kang <jinoh.kang.kr@gmail.com>
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 arch/x86/xen/efi.c           |   12 ++++++------
 arch/x86/xen/enlighten_pv.c  |    2 +-
 arch/x86/xen/enlighten_pvh.c |    4 ++++
 arch/x86/xen/xen-ops.h       |    4 ++--
 4 files changed, 13 insertions(+), 9 deletions(-)

--- a/arch/x86/xen/efi.c
+++ b/arch/x86/xen/efi.c
@@ -172,7 +172,7 @@ static enum efi_secureboot_mode xen_efi_
 	return efi_secureboot_mode_unknown;
 }
 
-void __init xen_efi_init(void)
+void __init xen_efi_init(struct boot_params *boot_params)
 {
 	efi_system_table_t *efi_systab_xen;
 
@@ -181,12 +181,12 @@ void __init xen_efi_init(void)
 	if (efi_systab_xen == NULL)
 		return;
 
-	strncpy((char *)&boot_params.efi_info.efi_loader_signature, "Xen",
-			sizeof(boot_params.efi_info.efi_loader_signature));
-	boot_params.efi_info.efi_systab = (__u32)__pa(efi_systab_xen);
-	boot_params.efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32);
+	strncpy((char *)&boot_params->efi_info.efi_loader_signature, "Xen",
+			sizeof(boot_params->efi_info.efi_loader_signature));
+	boot_params->efi_info.efi_systab = (__u32)__pa(efi_systab_xen);
+	boot_params->efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32);
 
-	boot_params.secure_boot = xen_efi_get_secureboot();
+	boot_params->secure_boot = xen_efi_get_secureboot();
 
 	set_bit(EFI_BOOT, &efi.flags);
 	set_bit(EFI_PARAVIRT, &efi.flags);
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1409,7 +1409,7 @@ asmlinkage __visible void __init xen_sta
 	/* We need this for printk timestamps */
 	xen_setup_runstate_info(0);
 
-	xen_efi_init();
+	xen_efi_init(&boot_params);
 
 	/* Start the world */
 #ifdef CONFIG_X86_32
--- a/arch/x86/xen/enlighten_pvh.c
+++ b/arch/x86/xen/enlighten_pvh.c
@@ -14,6 +14,8 @@
 #include <xen/interface/memory.h>
 #include <xen/interface/hvm/start_info.h>
 
+#include "xen-ops.h"
+
 /*
  * PVH variables.
  *
@@ -79,6 +81,8 @@ static void __init init_pvh_bootparams(v
 	pvh_bootparams.hdr.type_of_loader = (9 << 4) | 0; /* Xen loader */
 
 	x86_init.acpi.get_root_pointer = pvh_get_root_pointer;
+
+	xen_efi_init(&pvh_bootparams);
 }
 
 /*
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -122,9 +122,9 @@ static inline void __init xen_init_vga(c
 void __init xen_init_apic(void);
 
 #ifdef CONFIG_XEN_EFI
-extern void xen_efi_init(void);
+extern void xen_efi_init(struct boot_params *boot_params);
 #else
-static inline void __init xen_efi_init(void)
+static inline void __init xen_efi_init(struct boot_params *boot_params)
 {
 }
 #endif

[PATCH 4.19 73/77] netfilter: x_tables: Update remaining dereference to RCU

[Greg Kroah-Hartman]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

commit 443d6e86f821a165fae3fc3fc13086d27ac140b1 upstream.

This fixes the dereference to fetch the RCU pointer when holding
the appropriate xtables lock.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: cc00bcaa5899 ("netfilter: x_tables: Switch synchronization to RCU")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/netfilter/arp_tables.c |    2 +-
 net/ipv4/netfilter/ip_tables.c  |    2 +-
 net/ipv6/netfilter/ip6_tables.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -1405,7 +1405,7 @@ static int compat_get_entries(struct net
 	xt_compat_lock(NFPROTO_ARP);
 	t = xt_find_table_lock(net, NFPROTO_ARP, get.name);
 	if (!IS_ERR(t)) {
-		const struct xt_table_info *private = t->private;
+		const struct xt_table_info *private = xt_table_get_private_protected(t);
 		struct xt_table_info info;
 
 		ret = compat_table_info(private, &info);
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1619,7 +1619,7 @@ compat_get_entries(struct net *net, stru
 	xt_compat_lock(AF_INET);
 	t = xt_find_table_lock(net, AF_INET, get.name);
 	if (!IS_ERR(t)) {
-		const struct xt_table_info *private = t->private;
+		const struct xt_table_info *private = xt_table_get_private_protected(t);
 		struct xt_table_info info;
 		ret = compat_table_info(private, &info);
 		if (!ret && get.size == info.size)
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1628,7 +1628,7 @@ compat_get_entries(struct net *net, stru
 	xt_compat_lock(AF_INET6);
 	t = xt_find_table_lock(net, AF_INET6, get.name);
 	if (!IS_ERR(t)) {
-		const struct xt_table_info *private = t->private;
+		const struct xt_table_info *private = xt_table_get_private_protected(t);
 		struct xt_table_info info;
 		ret = compat_table_info(private, &info);
 		if (!ret && get.size == info.size)

[PATCH 4.19 74/77] netfilter: ipset: fix shift-out-of-bounds in htable_bits()

[Greg Kroah-Hartman]

From: Vasily Averin <vvs@virtuozzo.com>

commit 5c8193f568ae16f3242abad6518dc2ca6c8eef86 upstream.

htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds

UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 8498 Comm: syz-executor519
 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline]
 hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524
 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115
 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This patch replaces htable_bits() by simple fls(hashsize - 1) call:
it alone returns valid nbits both for round and non-round hashsizes.
It is normal to set any nbits here because it is validated inside
following htable_size() call which returns 0 for nbits>31.

Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation")
Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipset/ip_set_hash_gen.h |   20 +++++---------------
 1 file changed, 5 insertions(+), 15 deletions(-)

--- a/net/netfilter/ipset/ip_set_hash_gen.h
+++ b/net/netfilter/ipset/ip_set_hash_gen.h
@@ -115,20 +115,6 @@ htable_size(u8 hbits)
 	return hsize * sizeof(struct hbucket *) + sizeof(struct htable);
 }
 
-/* Compute htable_bits from the user input parameter hashsize */
-static u8
-htable_bits(u32 hashsize)
-{
-	/* Assume that hashsize == 2^htable_bits */
-	u8 bits = fls(hashsize - 1);
-
-	if (jhash_size(bits) != hashsize)
-		/* Round up to the first 2^n value */
-		bits = fls(hashsize);
-
-	return bits;
-}
-
 #ifdef IP_SET_HASH_WITH_NETS
 #if IPSET_NET_COUNT > 1
 #define __CIDR(cidr, i)		(cidr[i])
@@ -1287,7 +1273,11 @@ IPSET_TOKEN(HTYPE, _create)(struct net *
 	if (!h)
 		return -ENOMEM;
 
-	hbits = htable_bits(hashsize);
+	/* Compute htable_bits from the user input parameter hashsize.
+	 * Assume that hashsize == 2^htable_bits,
+	 * otherwise round up to the first 2^n value.
+	 */
+	hbits = fls(hashsize - 1);
 	hsize = htable_size(hbits);
 	if (hsize == 0) {
 		kfree(h);

[PATCH 4.19 75/77] netfilter: xt_RATEEST: reject non-null terminated string from userspace

[Greg Kroah-Hartman]

From: Florian Westphal <fw@strlen.de>

commit 6cb56218ad9e580e519dcd23bfb3db08d8692e5a upstream.

syzbot reports:
detected buffer overflow in strlen
[..]
Call Trace:
 strlen include/linux/string.h:325 [inline]
 strlcpy include/linux/string.h:348 [inline]
 xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143

strlcpy assumes src is a c-string. Check info->name before its used.

Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com
Fixes: 5859034d7eb8793 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_RATEEST.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/xt_RATEEST.c
+++ b/net/netfilter/xt_RATEEST.c
@@ -118,6 +118,9 @@ static int xt_rateest_tg_checkentry(cons
 	} cfg;
 	int ret;
 
+	if (strnlen(info->name, sizeof(est->name)) >= sizeof(est->name))
+		return -ENAMETOOLONG;
+
 	net_get_random_once(&jhash_rnd, sizeof(jhash_rnd));
 
 	mutex_lock(&xn->hash_lock);

[PATCH 4.19 76/77] x86/mtrr: Correct the range check before performing MTRR type lookups

[Greg Kroah-Hartman]

From: Ying-Tsun Huang <ying-tsun.huang@amd.com>

commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream.

In mtrr_type_lookup(), if the input memory address region is not in the
MTRR, over 4GB, and not over the top of memory, a write-back attribute
is returned. These condition checks are for ensuring the input memory
address region is actually mapped to the physical memory.

However, if the end address is just aligned with the top of memory,
the condition check treats the address is over the top of memory, and
write-back attribute is not returned.

And this hits in a real use case with NVDIMM: the nd_pmem module tries
to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a
NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes
very low since it is aligned with the top of memory and its memory type
is uncached-minus.

Move the input end address change to inclusive up into
mtrr_type_lookup(), before checking for the top of memory in either
mtrr_type_lookup_{variable,fixed}() helpers.

 [ bp: Massage commit message. ]

Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()")
Signed-off-by: Ying-Tsun Huang <ying-tsun.huang@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mtrr/generic.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -166,9 +166,6 @@ static u8 mtrr_type_lookup_variable(u64
 	*repeat = 0;
 	*uniform = 1;
 
-	/* Make end inclusive instead of exclusive */
-	end--;
-
 	prev_match = MTRR_TYPE_INVALID;
 	for (i = 0; i < num_var_ranges; ++i) {
 		unsigned short start_state, end_state, inclusive;
@@ -260,6 +257,9 @@ u8 mtrr_type_lookup(u64 start, u64 end,
 	int repeat;
 	u64 partial_end;
 
+	/* Make end inclusive instead of exclusive */
+	end--;
+
 	if (!mtrr_state_set)
 		return MTRR_TYPE_INVALID;
 

[PATCH 4.19 77/77] KVM: x86: fix shift out of bounds reported by UBSAN

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 2f80d502d627f30257ba7e3655e71c373b7d1a5a upstream.

Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.

Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/mmu.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -53,7 +53,7 @@ static inline u64 rsvd_bits(int s, int e
 	if (e < s)
 		return 0;
 
-	return ((1ULL << (e - s + 1)) - 1) << s;
+	return ((2ULL << (e - s)) - 1) << s;
 }
 
 void kvm_mmu_set_mmio_spte_mask(u64 mmio_mask, u64 mmio_value);

Re: [PATCH 4.19 00/77] 4.19.167-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 665 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.167 release.
> There are 77 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/239960426

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 00/77] 4.19.167-rc1 review

[Guenter Roeck]

On Mon, Jan 11, 2021 at 02:01:09PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.167 release.
> There are 77 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 418 pass: 418 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/77] 4.19.167-rc1 review

[Shuah Khan]

On 1/11/21 6:01 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.167 release.
> There are 77 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.167-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/77] 4.19.167-rc1 review

[Naresh Kamboju]

On Mon, 11 Jan 2021 at 18:38, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.167 release.
> There are 77 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Jan 2021 13:00:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.167-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.19.167-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 7f0a1a1d4ba925eedec5669d52d6ed7da84084da
git describe: v4.19.166-78-g7f0a1a1d4ba9
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.166-78-g7f0a1a1d4ba9

No regressions (compared to build v4.19.166)

No fixes (compared to build v4.19.166)

Ran 46273 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* ltp-controllers-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-mm-tests
* ltp-sched-tests
* fwts
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* perf
* v4l2-compliance
* ltp-fs-tests
* ltp-open-posix-tests
* kvm-unit-tests
* rcutorture
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-native

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/77] 4.19.167-rc1 review

[Greg Kroah-Hartman]

On Mon, Jan 11, 2021 at 05:24:15PM +0100, Pavel Machek wrote:
> Hi!
> 
> > This is the start of the stable review cycle for the 4.19.167 release.
> > There are 77 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> 
> CIP testing did not find any problems here:
> 
> https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/239960426
> 
> Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Thanks for testing 2 of these and letting me know.

greg k-h

Re: [PATCH 4.19 06/77] scsi: scsi_transport_spi: Set RQF_PM for domain validation commands

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2665 bytes --]

Hi!

> From: Bart Van Assche <bvanassche@acm.org>
> 
> [ Upstream commit cfefd9f8240a7b9fdd96fcd54cb029870b6d8d88 ]
> 
> Disable runtime power management during domain validation. Since a later
> patch removes RQF_PREEMPT, set RQF_PM for domain validation commands such
> that these are executed in the quiesced SCSI device state.

This and "05/77] scsi: ide: Do not set the RQF_PREEMPT flag for" do
not fix anything AFAICT. They are in series with other patches in
5.10, so they may make sense there, but I don't think we need them in
4.19.

Best regards,
								Pavel


> index 69213842e63e0..efb9c3d902133 100644
> --- a/drivers/scsi/scsi_transport_spi.c
> +++ b/drivers/scsi/scsi_transport_spi.c
> @@ -130,12 +130,16 @@ static int spi_execute(struct scsi_device *sdev, const void *cmd,
>  		sshdr = &sshdr_tmp;
>  
>  	for(i = 0; i < DV_RETRIES; i++) {
> +		/*
> +		 * The purpose of the RQF_PM flag below is to bypass the
> +		 * SDEV_QUIESCE state.
> +		 */
>  		result = scsi_execute(sdev, cmd, dir, buffer, bufflen, sense,
>  				      sshdr, DV_TIMEOUT, /* retries */ 1,
>  				      REQ_FAILFAST_DEV |
>  				      REQ_FAILFAST_TRANSPORT |
>  				      REQ_FAILFAST_DRIVER,
> -				      0, NULL);
> +				      RQF_PM, NULL);
>  		if (driver_byte(result) != DRIVER_SENSE ||
>  		    sshdr->sense_key != UNIT_ATTENTION)
>  			break;
> @@ -1018,23 +1022,26 @@ spi_dv_device(struct scsi_device *sdev)
>  	 */
>  	lock_system_sleep();
>  
> +	if (scsi_autopm_get_device(sdev))
> +		goto unlock_system_sleep;
> +
>  	if (unlikely(spi_dv_in_progress(starget)))
> -		goto unlock;
> +		goto put_autopm;
>  
>  	if (unlikely(scsi_device_get(sdev)))
> -		goto unlock;
> +		goto put_autopm;
>  
>  	spi_dv_in_progress(starget) = 1;
>  
>  	buffer = kzalloc(len, GFP_KERNEL);
>  
>  	if (unlikely(!buffer))
> -		goto out_put;
> +		goto put_sdev;
>  
>  	/* We need to verify that the actual device will quiesce; the
>  	 * later target quiesce is just a nice to have */
>  	if (unlikely(scsi_device_quiesce(sdev)))
> -		goto out_free;
> +		goto free_buffer;
>  
>  	scsi_target_quiesce(starget);
>  
> @@ -1054,12 +1061,16 @@ spi_dv_device(struct scsi_device *sdev)
>  
>  	spi_initial_dv(starget) = 1;
>  
> - out_free:
> +free_buffer:
>  	kfree(buffer);
> - out_put:
> +
> +put_sdev:
>  	spi_dv_in_progress(starget) = 0;
>  	scsi_device_put(sdev);
> -unlock:
> +put_autopm:
> +	scsi_autopm_put_device(sdev);
> +
> +unlock_system_sleep:
>  	unlock_system_sleep();
>  }
>  EXPORT_SYMBOL(spi_dv_device);
> -- 
> 2.27.0
> 
> 

-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 67/77] ALSA: hda/via: Fix runtime PM for Clevo W35xSS

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 719 bytes --]

Hi!

> From: Takashi Iwai <tiwai@suse.de>
> 
> commit 4bfd6247fa9164c8e193a55ef9c0ea3ee22f82d8 upstream.
> 
> Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
> looses the power state of some nodes after the runtime resume.  This
> was worked around by disabling the default runtime PM via a denylist
> entry.  Since 5.10.x made the runtime PM applied (casually) even
> though it's disabled in the denylist, this problem was revisited.  The
> result was that disabling power_save_node feature suffices for the
> runtime PM problem.

From changelog it looks like we do not need this for 4.19.

Best regards,
								Pavel
								 

-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH 4.19 67/77] ALSA: hda/via: Fix runtime PM for Clevo W35xSS

[Takashi Iwai]

On Wed, 13 Jan 2021 12:49:34 +0100,
Pavel Machek wrote:
> 
> Hi!
> 
> > From: Takashi Iwai <tiwai@suse.de>
> > 
> > commit 4bfd6247fa9164c8e193a55ef9c0ea3ee22f82d8 upstream.
> > 
> > Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
> > looses the power state of some nodes after the runtime resume.  This
> > was worked around by disabling the default runtime PM via a denylist
> > entry.  Since 5.10.x made the runtime PM applied (casually) even
> > though it's disabled in the denylist, this problem was revisited.  The
> > result was that disabling power_save_node feature suffices for the
> > runtime PM problem.
> 
> From changelog it looks like we do not need this for 4.19.

The patch fixes the runtime PM problem that has existed for long time, 
and that's the root cause of the issue mentioned in the Fixes tag
(that just papered over), so it still makes sense to backport as long
as it can be applied.


thanks,

Takashi

Re: [PATCH 4.19 06/77] scsi: scsi_transport_spi: Set RQF_PM for domain validation commands

[Bart Van Assche]

On 1/13/21 3:47 AM, Pavel Machek wrote:
>> From: Bart Van Assche <bvanassche@acm.org>
>>
>> [ Upstream commit cfefd9f8240a7b9fdd96fcd54cb029870b6d8d88 ]
>>
>> Disable runtime power management during domain validation. Since a later
>> patch removes RQF_PREEMPT, set RQF_PM for domain validation commands such
>> that these are executed in the quiesced SCSI device state.
> 
> This and "05/77] scsi: ide: Do not set the RQF_PREEMPT flag for" do
> not fix anything AFAICT. They are in series with other patches in
> 5.10, so they may make sense there, but I don't think we need them in
> 4.19.

Agreed. Please either backport the entire series of 8 patches or do not
backport any patch from that series. Selecting a subset of the patches
of that series is dangerous. As an example, applying patch 8/8 without
applying the prior patches from that series would break SCSI domain
validation. See also
https://lore.kernel.org/linux-scsi/20201209052951.16136-1-bvanassche@acm.org/

Thanks,

Bart.