From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
Mark Brown <broonie@kernel.org>, Wolfram Sang <wsa@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Andy Gross <agross@kernel.org>,
Matthias Kaehlcke <mka@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Sumit Semwal <sumit.semwal@linaro.org>,
Amit Pundir <amit.pundir@linaro.org>,
linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/7] soc: qcom: geni: move struct geni_wrapper to header
Date: Mon, 11 Jan 2021 20:46:46 +0530 [thread overview]
Message-ID: <20210111151651.1616813-3-vkoul@kernel.org> (raw)
In-Reply-To: <20210111151651.1616813-1-vkoul@kernel.org>
I2C geni driver needs to access struct geni_wrapper, so move it to
header.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/soc/qcom/qcom-geni-se.c | 15 ---------------
include/linux/qcom-geni-se.h | 15 +++++++++++++++
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 285ed86c2bab..a3868228ea05 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -79,21 +79,6 @@
*/
#define MAX_CLK_PERF_LEVEL 32
-#define NUM_AHB_CLKS 2
-
-/**
- * struct geni_wrapper - Data structure to represent the QUP Wrapper Core
- * @dev: Device pointer of the QUP wrapper core
- * @base: Base address of this instance of QUP wrapper core
- * @ahb_clks: Handle to the primary & secondary AHB clocks
- * @to_core: Core ICC path
- */
-struct geni_wrapper {
- struct device *dev;
- void __iomem *base;
- struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
- struct geni_icc_path to_core;
-};
static const char * const icc_path_names[] = {"qup-core", "qup-config",
"qup-memory"};
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index e3f4b16040d9..cb4e40908f9f 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -38,6 +38,21 @@ struct geni_icc_path {
unsigned int avg_bw;
};
+#define NUM_AHB_CLKS 2
+
+/**
+ * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core
+ * @dev: Device pointer of the QUP wrapper core
+ * @base: Base address of this instance of QUP wrapper core
+ * @ahb_clks: Handle to the primary & secondary AHB clocks
+ */
+struct geni_wrapper {
+ struct device *dev;
+ void __iomem *base;
+ struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+ struct geni_icc_path to_core;
+};
+
/**
* struct geni_se - GENI Serial Engine
* @base: Base Address of the Serial Engine's register block
--
2.26.2
next prev parent reply other threads:[~2021-01-11 15:18 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-11 15:16 [PATCH 0/7] Add and enable GPI DMA users Vinod Koul
2021-01-11 15:16 ` [PATCH 1/7] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-01-11 15:31 ` Bjorn Andersson
2021-01-11 15:16 ` Vinod Koul [this message]
2021-01-11 15:34 ` [PATCH 2/7] soc: qcom: geni: move struct geni_wrapper to header Bjorn Andersson
2021-01-11 17:43 ` Vinod Koul
2021-01-11 18:51 ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 3/7] soc: qcom: geni: Add support for gpi dma Vinod Koul
2021-01-11 15:40 ` Bjorn Andersson
2021-01-11 17:22 ` Vinod Koul
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:22 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma Vinod Koul
2021-01-11 16:35 ` Mark Brown
2021-06-16 8:50 ` Vinod Koul
2021-06-16 11:35 ` Mark Brown
2021-06-16 12:02 ` Vinod Koul
2021-06-17 6:20 ` Vinod Koul
2021-01-11 17:19 ` Bjorn Andersson
2021-01-12 7:31 ` Lukas Wunner
2021-01-13 0:01 ` Doug Anderson
2021-01-13 3:24 ` Vinod Koul
2021-02-04 21:34 ` Dmitry Baryshkov
2021-01-11 15:16 ` [PATCH 5/7] i2c: qcom-geni: Add support for GPI DMA Vinod Koul
2021-01-11 18:14 ` Bjorn Andersson
2021-01-12 5:50 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 6/7] arm64: dts: qcom: sdm845: Add gpi dma node Vinod Koul
2021-01-11 18:23 ` Bjorn Andersson
2021-01-12 4:21 ` Vinod Koul
2021-01-11 15:16 ` [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi Vinod Koul
2021-01-11 16:04 ` Konrad Dybcio
2021-01-11 17:46 ` Vinod Koul
2021-01-11 20:45 ` Konrad Dybcio
2021-01-12 4:19 ` Vinod Koul
2021-01-11 16:47 ` Doug Anderson
2021-01-11 17:56 ` Vinod Koul
2021-01-13 0:01 ` [PATCH 0/7] Add and enable GPI DMA users Doug Anderson
2021-01-13 3:03 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210111151651.1616813-3-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=amit.pundir@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=dianders@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=mka@chromium.org \
--cc=sumit.semwal@linaro.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).