linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Mark Brown <broonie@kernel.org>, Wolfram Sang <wsa@kernel.org>,
	linux-arm-msm@vger.kernel.org, Andy Gross <agross@kernel.org>,
	Matthias Kaehlcke <mka@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	Amit Pundir <amit.pundir@linaro.org>,
	linux-spi@vger.kernel.org, linux-i2c@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/7] soc: qcom: geni: Add support for gpi dma
Date: Mon, 11 Jan 2021 09:40:55 -0600	[thread overview]
Message-ID: <X/xxh8ejwY6cHdC1@builder.lan> (raw)
In-Reply-To: <20210111151651.1616813-4-vkoul@kernel.org>

On Mon 11 Jan 09:16 CST 2021, Vinod Koul wrote:

> GPI DMA is one of the DMA modes supported on geni, this adds support to
> enable that mode
> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  drivers/soc/qcom/qcom-geni-se.c | 39 ++++++++++++++++++++++++++++++++-
>  include/linux/qcom-geni-se.h    |  4 ++++
>  2 files changed, 42 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
> index a3868228ea05..db44dc32e049 100644
> --- a/drivers/soc/qcom/qcom-geni-se.c
> +++ b/drivers/soc/qcom/qcom-geni-se.c
> @@ -310,6 +310,39 @@ static void geni_se_select_dma_mode(struct geni_se *se)
>  		writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
>  }
>  
> +static int geni_se_select_gpi_mode(struct geni_se *se)

This doesn't return any information and the return value isn't looked
at, please make it void.

> +{
> +	unsigned int geni_dma_mode = 0;
> +	unsigned int gpi_event_en = 0;
> +	unsigned int common_geni_m_irq_en = 0;
> +	unsigned int common_geni_s_irq_en = 0;

These could certainly be given a shorter name.

None of them needs to be initialized, first access in all cases are
assignments.

> +
> +	common_geni_m_irq_en = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
> +	common_geni_s_irq_en = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
> +	common_geni_m_irq_en &=
> +			~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
> +			M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
> +	common_geni_s_irq_en &= ~S_CMD_DONE_EN;
> +	geni_dma_mode = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
> +	gpi_event_en = readl_relaxed(se->base + SE_GSI_EVENT_EN);
> +
> +	geni_dma_mode |= GENI_DMA_MODE_EN;
> +	gpi_event_en |= (DMA_RX_EVENT_EN | DMA_TX_EVENT_EN |
> +				GENI_M_EVENT_EN | GENI_S_EVENT_EN);

Please reorder these so that you do
	readl(m)
	mask out bits of m

	readl(s)
	mask out bits of s

	...

> +
> +	writel_relaxed(0, se->base + SE_IRQ_EN);
> +	writel_relaxed(common_geni_s_irq_en, se->base + SE_GENI_S_IRQ_EN);
> +	writel_relaxed(common_geni_m_irq_en, se->base + SE_GENI_M_IRQ_EN);
> +	writel_relaxed(0xFFFFFFFF, se->base + SE_GENI_M_IRQ_CLEAR);

Lowercase hex digits please.

> +	writel_relaxed(0xFFFFFFFF, se->base + SE_GENI_S_IRQ_CLEAR);
> +	writel_relaxed(0xFFFFFFFF, se->base + SE_DMA_TX_IRQ_CLR);
> +	writel_relaxed(0xFFFFFFFF, se->base + SE_DMA_RX_IRQ_CLR);
> +	writel_relaxed(geni_dma_mode, se->base + SE_GENI_DMA_MODE_EN);
> +	writel_relaxed(gpi_event_en, se->base + SE_GSI_EVENT_EN);

Why is this driver using _relaxed accessors exclusively? Why are you
using _relaxed versions?

And wouldn't it be suitable to have a wmb() before the "dma mode enable"
and "event enable" at least? (I.e. use writel() instead)

Regards,
Bjorn

> +
> +	return 0;
> +}
> +
>  /**
>   * geni_se_select_mode() - Select the serial engine transfer mode
>   * @se:		Pointer to the concerned serial engine.
> @@ -317,7 +350,8 @@ static void geni_se_select_dma_mode(struct geni_se *se)
>   */
>  void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
>  {
> -	WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
> +	WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA &&
> +		mode != GENI_GPI_DMA);
>  
>  	switch (mode) {
>  	case GENI_SE_FIFO:
> @@ -326,6 +360,9 @@ void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
>  	case GENI_SE_DMA:
>  		geni_se_select_dma_mode(se);
>  		break;
> +	case GENI_GPI_DMA:
> +		geni_se_select_gpi_mode(se);
> +		break;
>  	case GENI_SE_INVALID:
>  	default:
>  		break;
> diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
> index cb4e40908f9f..12003a6cb133 100644
> --- a/include/linux/qcom-geni-se.h
> +++ b/include/linux/qcom-geni-se.h
> @@ -12,6 +12,7 @@
>  enum geni_se_xfer_mode {
>  	GENI_SE_INVALID,
>  	GENI_SE_FIFO,
> +	GENI_GPI_DMA,
>  	GENI_SE_DMA,
>  };
>  
> @@ -123,6 +124,9 @@ struct geni_se {
>  #define CLK_DIV_MSK			GENMASK(15, 4)
>  #define CLK_DIV_SHFT			4
>  
> +/* GENI_IF_DISABLE_RO fields */
> +#define FIFO_IF_DISABLE			(BIT(0))
> +
>  /* GENI_FW_REVISION_RO fields */
>  #define FW_REV_PROTOCOL_MSK		GENMASK(15, 8)
>  #define FW_REV_PROTOCOL_SHFT		8
> -- 
> 2.26.2
> 

  reply	other threads:[~2021-01-11 15:41 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-11 15:16 [PATCH 0/7] Add and enable GPI DMA users Vinod Koul
2021-01-11 15:16 ` [PATCH 1/7] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-01-11 15:31   ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 2/7] soc: qcom: geni: move struct geni_wrapper to header Vinod Koul
2021-01-11 15:34   ` Bjorn Andersson
2021-01-11 17:43     ` Vinod Koul
2021-01-11 18:51       ` Bjorn Andersson
2021-01-11 15:16 ` [PATCH 3/7] soc: qcom: geni: Add support for gpi dma Vinod Koul
2021-01-11 15:40   ` Bjorn Andersson [this message]
2021-01-11 17:22     ` Vinod Koul
2021-01-13  0:01   ` Doug Anderson
2021-01-13  3:22     ` Vinod Koul
2021-01-11 15:16 ` [PATCH 4/7] spi: spi-geni-qcom: Add support for GPI dma Vinod Koul
2021-01-11 16:35   ` Mark Brown
2021-06-16  8:50     ` Vinod Koul
2021-06-16 11:35       ` Mark Brown
2021-06-16 12:02         ` Vinod Koul
2021-06-17  6:20           ` Vinod Koul
2021-01-11 17:19   ` Bjorn Andersson
2021-01-12  7:31   ` Lukas Wunner
2021-01-13  0:01   ` Doug Anderson
2021-01-13  3:24     ` Vinod Koul
2021-02-04 21:34   ` Dmitry Baryshkov
2021-01-11 15:16 ` [PATCH 5/7] i2c: qcom-geni: Add support for GPI DMA Vinod Koul
2021-01-11 18:14   ` Bjorn Andersson
2021-01-12  5:50     ` Vinod Koul
2021-01-11 15:16 ` [PATCH 6/7] arm64: dts: qcom: sdm845: Add gpi dma node Vinod Koul
2021-01-11 18:23   ` Bjorn Andersson
2021-01-12  4:21     ` Vinod Koul
2021-01-11 15:16 ` [PATCH 7/7] arm64: dts: qcom: sdm845: enable dma for spi Vinod Koul
2021-01-11 16:04   ` Konrad Dybcio
2021-01-11 17:46     ` Vinod Koul
2021-01-11 20:45       ` Konrad Dybcio
2021-01-12  4:19         ` Vinod Koul
2021-01-11 16:47   ` Doug Anderson
2021-01-11 17:56     ` Vinod Koul
2021-01-13  0:01 ` [PATCH 0/7] Add and enable GPI DMA users Doug Anderson
2021-01-13  3:03   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=X/xxh8ejwY6cHdC1@builder.lan \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=amit.pundir@linaro.org \
    --cc=broonie@kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=sumit.semwal@linaro.org \
    --cc=vkoul@kernel.org \
    --cc=wsa@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).