[PATCH 4.19 00/37] 4.19.173-rc1 review

[PATCH 4.19 00/37] 4.19.173-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.173 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu, 04 Feb 2021 13:29:33 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.173-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.173-rc1

Pengcheng Yang <yangpc@wangsu.com>
    tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN

Ivan Vecera <ivecera@redhat.com>
    team: protect features update by RCU to avoid deadlock

Pan Bian <bianpan2016@163.com>
    NFC: fix possible resource leak

Pan Bian <bianpan2016@163.com>
    NFC: fix resource leak when target index is invalid

Takeshi Misawa <jeliantsurux@gmail.com>
    rxrpc: Fix memory leak in rxrpc_lookup_local

Bartosz Golaszewski <bgolaszewski@baylibre.com>
    iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built

David Woodhouse <dwmw@amazon.co.uk>
    iommu/vt-d: Gracefully handle DMAR units with no supported address widths

Dan Carpenter <dan.carpenter@oracle.com>
    can: dev: prevent potential information leak in can_fill_info()

Roi Dayan <roid@nvidia.com>
    net/mlx5: Fix memory leak on flow table creation error flow

Johannes Berg <johannes.berg@intel.com>
    mac80211: pause TX while changing interface type

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: reschedule in long-running memory reads

Johannes Berg <johannes.berg@intel.com>
    iwlwifi: pcie: use jiffies for memory read spin time limit

Trond Myklebust <trond.myklebust@hammerspace.com>
    pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

Kamal Heib <kamalheib1@gmail.com>
    RDMA/cxgb4: Fix the reported max_recv_sge value

Eyal Birger <eyal.birger@gmail.com>
    xfrm: fix disable_xfrm sysctl when used on xfrm interfaces

Shmulik Ladkani <shmulik@metanetworks.com>
    xfrm: Fix oops in xfrm_replay_advance_bmp

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_dynset: add timeout extension to template

Max Krummenacher <max.oss.09@gmail.com>
    ARM: imx: build suspend-imx6.S with arm instruction set

Roger Pau Monne <roger.pau@citrix.com>
    xen-blkfront: allow discard-* nodes to be optional

Lorenzo Bianconi <lorenzo@kernel.org>
    mt7601u: fix rx buffer refcounting

Lorenzo Bianconi <lorenzo@kernel.org>
    mt7601u: fix kernel crash unplugging the device

Andrea Righi <andrea.righi@canonical.com>
    leds: trigger: fix potential deadlock with libata

David Woodhouse <dwmw@amazon.co.uk>
    xen: Fix XenStore initialisation for XS_LOCAL

Jay Zhou <jianjay.zhou@huawei.com>
    KVM: x86: get smi pending status correctly

Like Xu <like.xu@linux.intel.com>
    KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[]

Claudiu Beznea <claudiu.beznea@microchip.com>
    drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]

Sudeep Holla <sudeep.holla@arm.com>
    drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs

Laurent Badel <laurentbadel@eaton.com>
    PM: hibernate: flush swap writer after marking

Giacinto Cifelli <gciofono@gmail.com>
    net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family

Johannes Berg <johannes.berg@intel.com>
    wext: fix NULL-ptr-dereference with cfg80211's lack of commit()

Koen Vandeputte <koen.vandeputte@citymesh.com>
    ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming

Sean Young <sean@mess.org>
    media: rc: ensure that uevent can be read directly after rc device register

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/via: Apply the workaround generically for Clevo machines

Roger Pau Monne <roger.pau@citrix.com>
    xen/privcmd: allow fetching resource sizes

Baoquan He <bhe@redhat.com>
    kernel: kexec: remove the lock operation of system_transition_mutex

Kai-Heng Feng <kai.heng.feng@canonical.com>
    ACPI: sysfs: Prefer "compatible" modalias

Josef Bacik <josef@toxicpanda.com>
    nbd: freeze the queue while we're adding connections


-------------

Diffstat:

 Makefile                                          |  4 +-
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi             |  2 +-
 arch/arm/mach-imx/suspend-imx6.S                  |  1 +
 arch/x86/kvm/pmu_intel.c                          |  2 +-
 arch/x86/kvm/x86.c                                |  5 +++
 drivers/acpi/device_sysfs.c                       | 20 +++-------
 drivers/block/nbd.c                               |  8 ++++
 drivers/block/xen-blkfront.c                      | 20 ++++------
 drivers/infiniband/hw/cxgb4/qp.c                  |  2 +-
 drivers/iommu/dmar.c                              | 45 ++++++++++++++++-------
 drivers/leds/led-triggers.c                       | 10 +++--
 drivers/media/rc/rc-main.c                        |  4 +-
 drivers/net/can/dev.c                             |  2 +-
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |  1 +
 drivers/net/team/team.c                           |  6 +--
 drivers/net/usb/qmi_wwan.c                        |  1 +
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c   | 14 ++++---
 drivers/net/wireless/mediatek/mt7601u/dma.c       |  5 +--
 drivers/soc/atmel/soc.c                           | 13 +++++++
 drivers/xen/privcmd.c                             | 25 ++++++++++---
 drivers/xen/xenbus/xenbus_probe.c                 | 31 ++++++++++++++++
 fs/nfs/pnfs.c                                     |  1 +
 include/linux/intel-iommu.h                       |  2 +
 include/net/tcp.h                                 |  2 +-
 kernel/kexec_core.c                               |  2 -
 kernel/power/swap.c                               |  2 +-
 net/ipv4/tcp_input.c                              | 10 +++--
 net/ipv4/tcp_recovery.c                           |  5 ++-
 net/mac80211/ieee80211_i.h                        |  1 +
 net/mac80211/iface.c                              |  6 +++
 net/netfilter/nft_dynset.c                        |  4 +-
 net/nfc/netlink.c                                 |  1 +
 net/nfc/rawsock.c                                 |  2 +-
 net/rxrpc/call_accept.c                           |  1 +
 net/wireless/wext-core.c                          |  5 ++-
 net/xfrm/xfrm_input.c                             |  2 +-
 net/xfrm/xfrm_policy.c                            |  4 +-
 sound/pci/hda/patch_via.c                         |  2 +-
 38 files changed, 184 insertions(+), 89 deletions(-)

[PATCH 4.19 01/37] nbd: freeze the queue while were adding connections

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit b98e762e3d71e893b221f871825dc64694cfb258 upstream.

When setting up a device, we can krealloc the config->socks array to add
new sockets to the configuration.  However if we happen to get a IO
request in at this point even though we aren't setup we could hit a UAF,
as we deref config->socks without any locking, assuming that the
configuration was setup already and that ->socks is safe to access it as
we have a reference on the configuration.

But there's nothing really preventing IO from occurring at this point of
the device setup, we don't want to incur the overhead of a lock to
access ->socks when it will never change while the device is running.
To fix this UAF scenario simply freeze the queue if we are adding
sockets.  This will protect us from this particular case without adding
any additional overhead for the normal running case.

Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/nbd.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -966,6 +966,12 @@ static int nbd_add_socket(struct nbd_dev
 	if (!sock)
 		return err;
 
+	/*
+	 * We need to make sure we don't get any errant requests while we're
+	 * reallocating the ->socks array.
+	 */
+	blk_mq_freeze_queue(nbd->disk->queue);
+
 	if (!netlink && !nbd->task_setup &&
 	    !test_bit(NBD_BOUND, &config->runtime_flags))
 		nbd->task_setup = current;
@@ -1004,10 +1010,12 @@ static int nbd_add_socket(struct nbd_dev
 	nsock->cookie = 0;
 	socks[config->num_connections++] = nsock;
 	atomic_inc(&config->live_connections);
+	blk_mq_unfreeze_queue(nbd->disk->queue);
 
 	return 0;
 
 put_socket:
+	blk_mq_unfreeze_queue(nbd->disk->queue);
 	sockfd_put(sock);
 	return err;
 }

[PATCH 4.19 02/37] ACPI: sysfs: Prefer "compatible" modalias

[Greg Kroah-Hartman]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit 36af2d5c4433fb40ee2af912c4ac0a30991aecfc upstream.

Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.

This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.

So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.

Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/device_sysfs.c |   20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

--- a/drivers/acpi/device_sysfs.c
+++ b/drivers/acpi/device_sysfs.c
@@ -259,20 +259,12 @@ int __acpi_device_uevent_modalias(struct
 	if (add_uevent_var(env, "MODALIAS="))
 		return -ENOMEM;
 
-	len = create_pnp_modalias(adev, &env->buf[env->buflen - 1],
-				  sizeof(env->buf) - env->buflen);
-	if (len < 0)
-		return len;
-
-	env->buflen += len;
-	if (!adev->data.of_compatible)
-		return 0;
-
-	if (len > 0 && add_uevent_var(env, "MODALIAS="))
-		return -ENOMEM;
-
-	len = create_of_modalias(adev, &env->buf[env->buflen - 1],
-				 sizeof(env->buf) - env->buflen);
+	if (adev->data.of_compatible)
+		len = create_of_modalias(adev, &env->buf[env->buflen - 1],
+					 sizeof(env->buf) - env->buflen);
+	else
+		len = create_pnp_modalias(adev, &env->buf[env->buflen - 1],
+					  sizeof(env->buf) - env->buflen);
 	if (len < 0)
 		return len;
 

[PATCH 4.19 03/37] kernel: kexec: remove the lock operation of system_transition_mutex

[Greg Kroah-Hartman]

From: Baoquan He <bhe@redhat.com>

commit 56c91a18432b631ca18438841fd1831ef756cabf upstream.

Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.

The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.

Fixes: 55f2503c3b69 ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/kexec_core.c |    2 --
 1 file changed, 2 deletions(-)

--- a/kernel/kexec_core.c
+++ b/kernel/kexec_core.c
@@ -1130,7 +1130,6 @@ int kernel_kexec(void)
 
 #ifdef CONFIG_KEXEC_JUMP
 	if (kexec_image->preserve_context) {
-		lock_system_sleep();
 		pm_prepare_console();
 		error = freeze_processes();
 		if (error) {
@@ -1193,7 +1192,6 @@ int kernel_kexec(void)
 		thaw_processes();
  Restore_console:
 		pm_restore_console();
-		unlock_system_sleep();
 	}
 #endif
 

[PATCH 4.19 04/37] xen/privcmd: allow fetching resource sizes

[Greg Kroah-Hartman]

From: Roger Pau Monne <roger.pau@citrix.com>

commit ef3a575baf53571dc405ee4028e26f50856898e7 upstream.

Allow issuing an IOCTL_PRIVCMD_MMAP_RESOURCE ioctl with num = 0 and
addr = 0 in order to fetch the size of a specific resource.

Add a shortcut to the default map resource path, since fetching the
size requires no address to be passed in, and thus no VMA to setup.

This is missing from the initial implementation, and causes issues
when mapping resources that don't have fixed or known sizes.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org # >= 4.18
Link: https://lore.kernel.org/r/20210112115358.23346-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/privcmd.c |   25 +++++++++++++++++++------
 1 file changed, 19 insertions(+), 6 deletions(-)

--- a/drivers/xen/privcmd.c
+++ b/drivers/xen/privcmd.c
@@ -743,14 +743,15 @@ static int remap_pfn_fn(pte_t *ptep, pgt
 	return 0;
 }
 
-static long privcmd_ioctl_mmap_resource(struct file *file, void __user *udata)
+static long privcmd_ioctl_mmap_resource(struct file *file,
+				struct privcmd_mmap_resource __user *udata)
 {
 	struct privcmd_data *data = file->private_data;
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	struct privcmd_mmap_resource kdata;
 	xen_pfn_t *pfns = NULL;
-	struct xen_mem_acquire_resource xdata;
+	struct xen_mem_acquire_resource xdata = { };
 	int rc;
 
 	if (copy_from_user(&kdata, udata, sizeof(kdata)))
@@ -760,6 +761,22 @@ static long privcmd_ioctl_mmap_resource(
 	if (data->domid != DOMID_INVALID && data->domid != kdata.dom)
 		return -EPERM;
 
+	/* Both fields must be set or unset */
+	if (!!kdata.addr != !!kdata.num)
+		return -EINVAL;
+
+	xdata.domid = kdata.dom;
+	xdata.type = kdata.type;
+	xdata.id = kdata.id;
+
+	if (!kdata.addr && !kdata.num) {
+		/* Query the size of the resource. */
+		rc = HYPERVISOR_memory_op(XENMEM_acquire_resource, &xdata);
+		if (rc)
+			return rc;
+		return __put_user(xdata.nr_frames, &udata->num);
+	}
+
 	down_write(&mm->mmap_sem);
 
 	vma = find_vma(mm, kdata.addr);
@@ -793,10 +810,6 @@ static long privcmd_ioctl_mmap_resource(
 	} else
 		vma->vm_private_data = PRIV_VMA_LOCKED;
 
-	memset(&xdata, 0, sizeof(xdata));
-	xdata.domid = kdata.dom;
-	xdata.type = kdata.type;
-	xdata.id = kdata.id;
 	xdata.frame = kdata.idx;
 	xdata.nr_frames = kdata.num;
 	set_xen_guest_handle(xdata.frame_list, pfns);

[PATCH 4.19 05/37] ALSA: hda/via: Apply the workaround generically for Clevo machines

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 4961167bf7482944ca09a6f71263b9e47f949851 upstream.

We've got another report indicating a similar problem wrt the
power-saving behavior with VIA codec on Clevo machines.  Let's apply
the existing workaround generically to all Clevo devices with VIA
codecs to cover all in once.

BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1181330
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210126165603.11683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_via.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -1056,7 +1056,7 @@ static const struct hda_fixup via_fixups
 static const struct snd_pci_quirk vt2002p_fixups[] = {
 	SND_PCI_QUIRK(0x1043, 0x1487, "Asus G75", VIA_FIXUP_ASUS_G75),
 	SND_PCI_QUIRK(0x1043, 0x8532, "Asus X202E", VIA_FIXUP_INTMIC_BOOST),
-	SND_PCI_QUIRK(0x1558, 0x3501, "Clevo W35xSS_370SS", VIA_FIXUP_POWER_SAVE),
+	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo", VIA_FIXUP_POWER_SAVE),
 	{}
 };
 

[PATCH 4.19 06/37] media: rc: ensure that uevent can be read directly after rc device register

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 896111dc4bcf887b835b3ef54f48b450d4692a1d upstream.

There is a race condition where if the /sys/class/rc0/uevent file is read
before rc_dev->registered is set to true, -ENODEV will be returned.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901089

Cc: stable@vger.kernel.org
Fixes: a2e2d73fa281 ("media: rc: do not access device via sysfs after rc_unregister_device()")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/rc-main.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1875,6 +1875,8 @@ int rc_register_device(struct rc_dev *de
 			goto out_raw;
 	}
 
+	dev->registered = true;
+
 	rc = device_add(&dev->dev);
 	if (rc)
 		goto out_rx_free;
@@ -1884,8 +1886,6 @@ int rc_register_device(struct rc_dev *de
 		 dev->device_name ?: "Unspecified device", path ?: "N/A");
 	kfree(path);
 
-	dev->registered = true;
-
 	/*
 	 * once the the input device is registered in rc_setup_rx_device,
 	 * userspace can open the input device and rc_open() will be called

[PATCH 4.19 07/37] ARM: dts: imx6qdl-gw52xx: fix duplicate regulator naming

[Greg Kroah-Hartman]

From: Koen Vandeputte <koen.vandeputte@citymesh.com>

commit 5a22747b76ca2384057d8e783265404439d31d7f upstream.

2 regulator descriptions carry identical naming.

This leads to following boot warning:
[    0.173138] debugfs: Directory 'vdd1p8' with parent 'regulator' already present!

Fix this by renaming the one used for audio.

Fixes: 5051bff33102 ("ARM: dts: imx: ventana: add LTC3676 PMIC support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: stable@vger.kernel.org # v4.11
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -278,7 +278,7 @@
 
 			/* VDD_AUD_1P8: Audio codec */
 			reg_aud_1p8v: ldo3 {
-				regulator-name = "vdd1p8";
+				regulator-name = "vdd1p8a";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;

[PATCH 4.19 08/37] wext: fix NULL-ptr-dereference with cfg80211s lack of commit()

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 5122565188bae59d507d90a9a9fd2fd6107f4439 upstream.

Since cfg80211 doesn't implement commit, we never really cared about
that code there (and it's configured out w/o CONFIG_WIRELESS_EXT).
After all, since it has no commit, it shouldn't return -EIWCOMMIT to
indicate commit is needed.

However, EIWCOMMIT is actually an alias for EINPROGRESS, which _can_
happen if e.g. we try to change the frequency but we're already in
the process of connecting to some network, and drivers could return
that value (or even cfg80211 itself might).

This then causes us to crash because dev->wireless_handlers is NULL
but we try to check dev->wireless_handlers->standard[0].

Fix this by also checking dev->wireless_handlers. Also simplify the
code a little bit.

Cc: stable@vger.kernel.org
Reported-by: syzbot+444248c79e117bc99f46@syzkaller.appspotmail.com
Reported-by: syzbot+8b2a88a09653d4084179@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210121171621.2076e4a37d5a.I5d9c72220fe7bb133fb718751da0180a57ecba4e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/wext-core.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -896,8 +896,9 @@ out:
 int call_commit_handler(struct net_device *dev)
 {
 #ifdef CONFIG_WIRELESS_EXT
-	if ((netif_running(dev)) &&
-	   (dev->wireless_handlers->standard[0] != NULL))
+	if (netif_running(dev) &&
+	    dev->wireless_handlers &&
+	    dev->wireless_handlers->standard[0])
 		/* Call the commit handler on the driver */
 		return dev->wireless_handlers->standard[0](dev, NULL,
 							   NULL, NULL);

[PATCH 4.19 09/37] net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family

[Greg Kroah-Hartman]

From: Giacinto Cifelli <gciofono@gmail.com>

commit 7e0e63d09516e96994c879f07c5a3c3269d7015e upstream.

Bus 003 Device 009: ID 1e2d:006f
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x1e2d
  idProduct          0x006f
  bcdDevice            0.00
  iManufacturer           3 Cinterion Wireless Modules
  iProduct                2 PLSx3
  iSerial                 4 fa3c1419
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength          303
    bNumInterfaces          9
    bConfigurationValue     1
    iConfiguration          1 Cinterion Configuration
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         0
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         2
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        2
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          3
      CDC Union:
        bMasterInterface        2
        bSlaveInterface         3
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        3
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         4
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        4
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          5
      CDC Union:
        bMasterInterface        4
        bSlaveInterface         5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        5
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x86  EP 6 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Association:
      bLength                 8
      bDescriptorType        11
      bFirstInterface         6
      bInterfaceCount         2
      bFunctionClass          2 Communications
      bFunctionSubClass       2 Abstract (modem)
      bFunctionProtocol       1 AT-commands (v.25ter)
      iFunction               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        6
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      CDC Header:
        bcdCDC               1.10
      CDC ACM:
        bmCapabilities       0x02
          line coding and serial state
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          7
      CDC Union:
        bMasterInterface        6
        bSlaveInterface         7
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        7
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x88  EP 8 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        8
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x89  EP 9 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x8a  EP 10 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2 ?
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Cc: stable@vger.kernel.org
Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1284,6 +1284,7 @@ static const struct usb_device_id produc
 	{QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)},	/* Olivetti Olicard 160 */
 	{QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)},	/* Olivetti Olicard 500 */
 	{QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},	/* Cinterion PLxx */
+	{QMI_QUIRK_SET_DTR(0x1e2d, 0x006f, 8)}, /* Cinterion PLS83/PLS63 */
 	{QMI_FIXED_INTF(0x1e2d, 0x0053, 4)},	/* Cinterion PHxx,PXxx */
 	{QMI_FIXED_INTF(0x1e2d, 0x0063, 10)},	/* Cinterion ALASxx (1 RmNet) */
 	{QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},	/* Cinterion PHxx,PXxx (2 RmNet) */

[PATCH 4.19 10/37] PM: hibernate: flush swap writer after marking

[Greg Kroah-Hartman]

From: Laurent Badel <laurentbadel@eaton.com>

commit fef9c8d28e28a808274a18fbd8cc2685817fd62a upstream.

Flush the swap writer after, not before, marking the files, to ensure the
signature is properly written.

Fixes: 6f612af57821 ("PM / Hibernate: Group swap ops")
Signed-off-by: Laurent Badel <laurentbadel@eaton.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/power/swap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -491,10 +491,10 @@ static int swap_writer_finish(struct swa
 		unsigned int flags, int error)
 {
 	if (!error) {
-		flush_swap_writer(handle);
 		pr_info("S");
 		error = mark_swapfiles(handle, flags);
 		pr_cont("|\n");
+		flush_swap_writer(handle);
 	}
 
 	if (error)

[PATCH 4.19 11/37] drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs

[Greg Kroah-Hartman]

From: Sudeep Holla <sudeep.holla@arm.com>

commit caab13b4960416b9fee83169a758eb0f31e65109 upstream.

Since at91_soc_init is called unconditionally from atmel_soc_device_init,
we get the following warning on all non AT91 SoCs:
	" AT91: Could not find identification node"

Fix the same by filtering with allowed AT91 SoC list.

Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: stable@vger.kernel.org #4.12+
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201211135846.1334322-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/soc/atmel/soc.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/soc/atmel/soc.c
+++ b/drivers/soc/atmel/soc.c
@@ -254,8 +254,20 @@ struct soc_device * __init at91_soc_init
 	return soc_dev;
 }
 
+static const struct of_device_id at91_soc_allowed_list[] __initconst = {
+	{ .compatible = "atmel,at91rm9200", },
+	{ .compatible = "atmel,at91sam9", },
+	{ .compatible = "atmel,sama5", },
+	{ .compatible = "atmel,samv7", }
+};
+
 static int __init atmel_soc_device_init(void)
 {
+	struct device_node *np = of_find_node_by_path("/");
+
+	if (!of_match_node(at91_soc_allowed_list, np))
+		return 0;
+
 	at91_soc_init(socs);
 
 	return 0;

[PATCH 4.19 12/37] drivers: soc: atmel: add null entry at the end of at91_soc_allowed_list[]

[Greg Kroah-Hartman]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

commit 680896556805d3ad3fa47f6002b87b3041a45ac2 upstream.

of_match_node() calls __of_match_node() which loops though the entries of
matches array. It stops when condition:
(matches->name[0] || matches->type[0] || matches->compatible[0]) is
false. Thus, add a null entry at the end of at91_soc_allowed_list[]
array.

Fixes: caab13b49604 ("drivers: soc: atmel: Avoid calling at91_soc_init on non AT91 SoCs")
Cc: stable@vger.kernel.org #4.12+
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/soc/atmel/soc.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/soc/atmel/soc.c
+++ b/drivers/soc/atmel/soc.c
@@ -258,7 +258,8 @@ static const struct of_device_id at91_so
 	{ .compatible = "atmel,at91rm9200", },
 	{ .compatible = "atmel,at91sam9", },
 	{ .compatible = "atmel,sama5", },
-	{ .compatible = "atmel,samv7", }
+	{ .compatible = "atmel,samv7", },
+	{ }
 };
 
 static int __init atmel_soc_device_init(void)

[PATCH 4.19 13/37] KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[]

[Greg Kroah-Hartman]

From: Like Xu <like.xu@linux.intel.com>

commit 98dd2f108e448988d91e296173e773b06fb978b8 upstream.

The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.

Fixes: 62079d8a4312 ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/pmu_intel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/pmu_intel.c
+++ b/arch/x86/kvm/pmu_intel.c
@@ -29,7 +29,7 @@ static struct kvm_event_hw_type_mapping
 	[4] = { 0x2e, 0x41, PERF_COUNT_HW_CACHE_MISSES },
 	[5] = { 0xc4, 0x00, PERF_COUNT_HW_BRANCH_INSTRUCTIONS },
 	[6] = { 0xc5, 0x00, PERF_COUNT_HW_BRANCH_MISSES },
-	[7] = { 0x00, 0x30, PERF_COUNT_HW_REF_CPU_CYCLES },
+	[7] = { 0x00, 0x03, PERF_COUNT_HW_REF_CPU_CYCLES },
 };
 
 /* mapping between fixed pmc index and intel_arch_events array */

[PATCH 4.19 14/37] KVM: x86: get smi pending status correctly

[Greg Kroah-Hartman]

From: Jay Zhou <jianjay.zhou@huawei.com>

commit 1f7becf1b7e21794fc9d460765fe09679bc9b9e0 upstream.

The injection process of smi has two steps:

    Qemu                        KVM
Step1:
    cpu->interrupt_request &= \
        ~CPU_INTERRUPT_SMI;
    kvm_vcpu_ioctl(cpu, KVM_SMI)

                                call kvm_vcpu_ioctl_smi() and
                                kvm_make_request(KVM_REQ_SMI, vcpu);

Step2:
    kvm_vcpu_ioctl(cpu, KVM_RUN, 0)

                                call process_smi() if
                                kvm_check_request(KVM_REQ_SMI, vcpu) is
                                true, mark vcpu->arch.smi_pending = true;

The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.

Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -102,6 +102,7 @@ static u64 __read_mostly cr4_reserved_bi
 
 static void update_cr8_intercept(struct kvm_vcpu *vcpu);
 static void process_nmi(struct kvm_vcpu *vcpu);
+static void process_smi(struct kvm_vcpu *vcpu);
 static void enter_smm(struct kvm_vcpu *vcpu);
 static void __kvm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags);
 static void store_regs(struct kvm_vcpu *vcpu);
@@ -3499,6 +3500,10 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_
 					       struct kvm_vcpu_events *events)
 {
 	process_nmi(vcpu);
+
+	if (kvm_check_request(KVM_REQ_SMI, vcpu))
+		process_smi(vcpu);
+
 	/*
 	 * FIXME: pass injected and pending separately.  This is only
 	 * needed for nested virtualization, whose state cannot be

[PATCH 4.19 15/37] xen: Fix XenStore initialisation for XS_LOCAL

[Greg Kroah-Hartman]

From: David Woodhouse <dwmw@amazon.co.uk>

commit 5f46400f7a6a4fad635d5a79e2aa5a04a30ffea1 upstream.

In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI")
I reworked the triggering of xenbus_probe().

I tried to simplify things by taking out the workqueue based startup
triggered from wake_waiting(); the somewhat poorly named xenbus IRQ
handler.

I missed the fact that in the XS_LOCAL case (Dom0 starting its own
xenstored or xenstore-stubdom, which happens after the kernel is booted
completely), that IRQ-based trigger is still actually needed.

So... put it back, except more cleanly. By just spawning a xenbus_probe
thread which waits on xb_waitq and runs the probe the first time it
gets woken, just as the workqueue-based hack did.

This is actually a nicer approach for *all* the back ends with different
interrupt methods, and we can switch them all over to that without the
complex conditions for when to trigger it. But not in -rc6. This is
the minimal fix for the regression, although it's a step in the right
direction instead of doing a partial revert and actually putting the
workqueue back. It's also simpler than the workqueue.

Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xenbus/xenbus_probe.c |   31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -714,6 +714,23 @@ static bool xs_hvm_defer_init_for_callba
 #endif
 }
 
+static int xenbus_probe_thread(void *unused)
+{
+	DEFINE_WAIT(w);
+
+	/*
+	 * We actually just want to wait for *any* trigger of xb_waitq,
+	 * and run xenbus_probe() the moment it occurs.
+	 */
+	prepare_to_wait(&xb_waitq, &w, TASK_INTERRUPTIBLE);
+	schedule();
+	finish_wait(&xb_waitq, &w);
+
+	DPRINTK("probing");
+	xenbus_probe();
+	return 0;
+}
+
 static int __init xenbus_probe_initcall(void)
 {
 	/*
@@ -725,6 +742,20 @@ static int __init xenbus_probe_initcall(
 	     !xs_hvm_defer_init_for_callback()))
 		xenbus_probe();
 
+	/*
+	 * For XS_LOCAL, spawn a thread which will wait for xenstored
+	 * or a xenstore-stubdom to be started, then probe. It will be
+	 * triggered when communication starts happening, by waiting
+	 * on xb_waitq.
+	 */
+	if (xen_store_domain_type == XS_LOCAL) {
+		struct task_struct *probe_task;
+
+		probe_task = kthread_run(xenbus_probe_thread, NULL,
+					 "xenbus_probe");
+		if (IS_ERR(probe_task))
+			return PTR_ERR(probe_task);
+	}
 	return 0;
 }
 device_initcall(xenbus_probe_initcall);

[PATCH 4.19 16/37] leds: trigger: fix potential deadlock with libata

[Greg Kroah-Hartman]

From: Andrea Righi <andrea.righi@canonical.com>

commit 27af8e2c90fba242460b01fa020e6e19ed68c495 upstream.

We have the following potential deadlock condition:

 ========================================================
 WARNING: possible irq lock inversion dependency detected
 5.10.0-rc2+ #25 Not tainted
 --------------------------------------------------------
 swapper/3/0 just changed the state of lock:
 ffff8880063bd618 (&host->lock){-...}-{2:2}, at: ata_bmdma_interrupt+0x27/0x200
 but this lock took another, HARDIRQ-READ-unsafe lock in the past:
  (&trig->leddev_list_lock){.+.?}-{2:2}

 and interrupts could create inverse lock ordering between them.

 other info that might help us debug this:
  Possible interrupt unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(&trig->leddev_list_lock);
                                local_irq_disable();
                                lock(&host->lock);
                                lock(&trig->leddev_list_lock);
   <Interrupt>
     lock(&host->lock);

  *** DEADLOCK ***

 no locks held by swapper/3/0.

 the shortest dependencies between 2nd lock and 1st lock:
  -> (&trig->leddev_list_lock){.+.?}-{2:2} ops: 46 {
     HARDIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     IN-SOFTIRQ-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       kbd_bh+0x9e/0xc0
                       tasklet_action_common.constprop.0+0xe9/0x100
                       tasklet_action+0x22/0x30
                       __do_softirq+0xcc/0x46d
                       run_ksoftirqd+0x3f/0x70
                       smpboot_thread_fn+0x116/0x1f0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     SOFTIRQ-ON-R at:
                       lock_acquire+0x15f/0x420
                       _raw_read_lock+0x42/0x90
                       led_trigger_event+0x2b/0x70
                       rfkill_global_led_trigger_worker+0x94/0xb0
                       process_one_work+0x240/0x560
                       worker_thread+0x58/0x3d0
                       kthread+0x151/0x170
                       ret_from_fork+0x1f/0x30
     INITIAL READ USE at:
                           lock_acquire+0x15f/0x420
                           _raw_read_lock+0x42/0x90
                           led_trigger_event+0x2b/0x70
                           rfkill_global_led_trigger_worker+0x94/0xb0
                           process_one_work+0x240/0x560
                           worker_thread+0x58/0x3d0
                           kthread+0x151/0x170
                           ret_from_fork+0x1f/0x30
   }
   ... key      at: [<ffffffff83da4c00>] __key.0+0x0/0x10
   ... acquired at:
    _raw_read_lock+0x42/0x90
    led_trigger_blink_oneshot+0x3b/0x90
    ledtrig_disk_activity+0x3c/0xa0
    ata_qc_complete+0x26/0x450
    ata_do_link_abort+0xa3/0xe0
    ata_port_freeze+0x2e/0x40
    ata_hsm_qc_complete+0x94/0xa0
    ata_sff_hsm_move+0x177/0x7a0
    ata_sff_pio_task+0xc7/0x1b0
    process_one_work+0x240/0x560
    worker_thread+0x58/0x3d0
    kthread+0x151/0x170
    ret_from_fork+0x1f/0x30

 -> (&host->lock){-...}-{2:2} ops: 69 {
    IN-HARDIRQ-W at:
                     lock_acquire+0x15f/0x420
                     _raw_spin_lock_irqsave+0x52/0xa0
                     ata_bmdma_interrupt+0x27/0x200
                     __handle_irq_event_percpu+0xd5/0x2b0
                     handle_irq_event+0x57/0xb0
                     handle_edge_irq+0x8c/0x230
                     asm_call_irq_on_stack+0xf/0x20
                     common_interrupt+0x100/0x1c0
                     asm_common_interrupt+0x1e/0x40
                     native_safe_halt+0xe/0x10
                     arch_cpu_idle+0x15/0x20
                     default_idle_call+0x59/0x1c0
                     do_idle+0x22c/0x2c0
                     cpu_startup_entry+0x20/0x30
                     start_secondary+0x11d/0x150
                     secondary_startup_64_no_verify+0xa6/0xab
    INITIAL USE at:
                    lock_acquire+0x15f/0x420
                    _raw_spin_lock_irqsave+0x52/0xa0
                    ata_dev_init+0x54/0xe0
                    ata_link_init+0x8b/0xd0
                    ata_port_alloc+0x1f1/0x210
                    ata_host_alloc+0xf1/0x130
                    ata_host_alloc_pinfo+0x14/0xb0
                    ata_pci_sff_prepare_host+0x41/0xa0
                    ata_pci_bmdma_prepare_host+0x14/0x30
                    piix_init_one+0x21f/0x600
                    local_pci_probe+0x48/0x80
                    pci_device_probe+0x105/0x1c0
                    really_probe+0x221/0x490
                    driver_probe_device+0xe9/0x160
                    device_driver_attach+0xb2/0xc0
                    __driver_attach+0x91/0x150
                    bus_for_each_dev+0x81/0xc0
                    driver_attach+0x1e/0x20
                    bus_add_driver+0x138/0x1f0
                    driver_register+0x91/0xf0
                    __pci_register_driver+0x73/0x80
                    piix_init+0x1e/0x2e
                    do_one_initcall+0x5f/0x2d0
                    kernel_init_freeable+0x26f/0x2cf
                    kernel_init+0xe/0x113
                    ret_from_fork+0x1f/0x30
  }
  ... key      at: [<ffffffff83d9fdc0>] __key.6+0x0/0x10
  ... acquired at:
    __lock_acquire+0x9da/0x2370
    lock_acquire+0x15f/0x420
    _raw_spin_lock_irqsave+0x52/0xa0
    ata_bmdma_interrupt+0x27/0x200
    __handle_irq_event_percpu+0xd5/0x2b0
    handle_irq_event+0x57/0xb0
    handle_edge_irq+0x8c/0x230
    asm_call_irq_on_stack+0xf/0x20
    common_interrupt+0x100/0x1c0
    asm_common_interrupt+0x1e/0x40
    native_safe_halt+0xe/0x10
    arch_cpu_idle+0x15/0x20
    default_idle_call+0x59/0x1c0
    do_idle+0x22c/0x2c0
    cpu_startup_entry+0x20/0x30
    start_secondary+0x11d/0x150
    secondary_startup_64_no_verify+0xa6/0xab

This lockdep splat is reported after:
commit e918188611f0 ("locking: More accurate annotations for read_lock()")

To clarify:
 - read-locks are recursive only in interrupt context (when
   in_interrupt() returns true)
 - after acquiring host->lock in CPU1, another cpu (i.e. CPU2) may call
   write_lock(&trig->leddev_list_lock) that would be blocked by CPU0
   that holds trig->leddev_list_lock in read-mode
 - when CPU1 (ata_ac_complete()) tries to read-lock
   trig->leddev_list_lock, it would be blocked by the write-lock waiter
   on CPU2 (because we are not in interrupt context, so the read-lock is
   not recursive)
 - at this point if an interrupt happens on CPU0 and
   ata_bmdma_interrupt() is executed it will try to acquire host->lock,
   that is held by CPU1, that is currently blocked by CPU2, so:

   * CPU0 blocked by CPU1
   * CPU1 blocked by CPU2
   * CPU2 blocked by CPU0

     *** DEADLOCK ***

The deadlock scenario is better represented by the following schema
(thanks to Boqun Feng <boqun.feng@gmail.com> for the schema and the
detailed explanation of the deadlock condition):

 CPU 0:                          CPU 1:                        CPU 2:
 -----                           -----                         -----
 led_trigger_event():
   read_lock(&trig->leddev_list_lock);
 				<workqueue>
 				ata_hsm_qc_complete():
 				  spin_lock_irqsave(&host->lock);
 								write_lock(&trig->leddev_list_lock);
 				  ata_port_freeze():
 				    ata_do_link_abort():
 				      ata_qc_complete():
 					ledtrig_disk_activity():
 					  led_trigger_blink_oneshot():
 					    read_lock(&trig->leddev_list_lock);
 					    // ^ not in in_interrupt() context, so could get blocked by CPU 2
 <interrupt>
   ata_bmdma_interrupt():
     spin_lock_irqsave(&host->lock);

Fix by using read_lock_irqsave/irqrestore() in led_trigger_event(), so
that no interrupt can happen in between, preventing the deadlock
condition.

Apply the same change to led_trigger_blink_setup() as well, since the
same deadlock scenario can also happen in power_supply_update_bat_leds()
-> led_trigger_blink() -> led_trigger_blink_setup() (workqueue context),
and potentially prevent other similar usages.

Link: https://lore.kernel.org/lkml/20201101092614.GB3989@xps-13-7390/
Fixes: eb25cb9956cc ("leds: convert IDE trigger to common disk trigger")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/leds/led-triggers.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -317,14 +317,15 @@ void led_trigger_event(struct led_trigge
 			enum led_brightness brightness)
 {
 	struct led_classdev *led_cdev;
+	unsigned long flags;
 
 	if (!trig)
 		return;
 
-	read_lock(&trig->leddev_list_lock);
+	read_lock_irqsave(&trig->leddev_list_lock, flags);
 	list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list)
 		led_set_brightness(led_cdev, brightness);
-	read_unlock(&trig->leddev_list_lock);
+	read_unlock_irqrestore(&trig->leddev_list_lock, flags);
 }
 EXPORT_SYMBOL_GPL(led_trigger_event);
 
@@ -335,11 +336,12 @@ static void led_trigger_blink_setup(stru
 			     int invert)
 {
 	struct led_classdev *led_cdev;
+	unsigned long flags;
 
 	if (!trig)
 		return;
 
-	read_lock(&trig->leddev_list_lock);
+	read_lock_irqsave(&trig->leddev_list_lock, flags);
 	list_for_each_entry(led_cdev, &trig->led_cdevs, trig_list) {
 		if (oneshot)
 			led_blink_set_oneshot(led_cdev, delay_on, delay_off,
@@ -347,7 +349,7 @@ static void led_trigger_blink_setup(stru
 		else
 			led_blink_set(led_cdev, delay_on, delay_off);
 	}
-	read_unlock(&trig->leddev_list_lock);
+	read_unlock_irqrestore(&trig->leddev_list_lock, flags);
 }
 
 void led_trigger_blink(struct led_trigger *trig,

[PATCH 4.19 17/37] mt7601u: fix kernel crash unplugging the device

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream.

The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.

Fix the issue enqueuing the skb only if usb_submit_urb() succeed.

Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
 mt7601u_tx_status+0x3e/0xa0 [mt7601u]
 mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
 mt7601u_cleanup+0x22/0x30 [mt7601u]
 mt7601u_disconnect+0x22/0x60 [mt7601u]
 usb_unbind_interface+0x8a/0x270
 ? kernfs_find_ns+0x35/0xd0
 __device_release_driver+0x17a/0x230
 device_release_driver+0x24/0x30
 bus_remove_device+0xdb/0x140
 device_del+0x18b/0x430
 ? kobject_put+0x98/0x1d0
 usb_disable_device+0xc6/0x1f0
 usb_disconnect.cold+0x7e/0x20a
 hub_event+0xbf3/0x1870
 process_one_work+0x1b6/0x350
 worker_thread+0x53/0x3e0
 ? process_one_work+0x350/0x350
 kthread+0x11b/0x140
 ? __kthread_bind_mask+0x60/0x60
 ret_from_fork+0x22/0x30

Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/mediatek/mt7601u/dma.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -318,7 +318,6 @@ static int mt7601u_dma_submit_tx(struct
 	}
 
 	e = &q->e[q->end];
-	e->skb = skb;
 	usb_fill_bulk_urb(e->urb, usb_dev, snd_pipe, skb->data, skb->len,
 			  mt7601u_complete_tx, q);
 	ret = usb_submit_urb(e->urb, GFP_ATOMIC);
@@ -336,6 +335,7 @@ static int mt7601u_dma_submit_tx(struct
 
 	q->end = (q->end + 1) % q->entries;
 	q->used++;
+	e->skb = skb;
 
 	if (q->used >= q->entries)
 		ieee80211_stop_queue(dev->hw, skb_get_queue_mapping(skb));

[PATCH 4.19 18/37] mt7601u: fix rx buffer refcounting

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit d24c790577ef01bfa01da2b131313a38c843a634 upstream.

Fix the following crash due to erroneous page refcounting:

[   32.445919] BUG: Bad page state in process swapper/1  pfn:11f65a
[   32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a
[   32.449605] flags: 0x8000000000000000()
[   32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000
[   32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
[   32.452999] page dumped because: nonzero mapcount
[   32.453888] Modules linked in:
[   32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976
[   32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[   32.457157] Call Trace:
[   32.457636]  <IRQ>
[   32.457993]  dump_stack+0x77/0x97
[   32.458576]  bad_page.cold+0x65/0x96
[   32.459198]  get_page_from_freelist+0x46a/0x11f0
[   32.460008]  __alloc_pages_nodemask+0x10a/0x2b0
[   32.460794]  mt7601u_rx_tasklet+0x651/0x720
[   32.461505]  tasklet_action_common.constprop.0+0x6b/0xd0
[   32.462343]  __do_softirq+0x152/0x46c
[   32.462928]  asm_call_irq_on_stack+0x12/0x20
[   32.463610]  </IRQ>
[   32.463953]  do_softirq_own_stack+0x5b/0x70
[   32.464582]  irq_exit_rcu+0x9f/0xe0
[   32.465028]  common_interrupt+0xae/0x1a0
[   32.465536]  asm_common_interrupt+0x1e/0x40
[   32.466071] RIP: 0010:default_idle+0x18/0x20
[   32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246
[   32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[   32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd
[   32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001
[   32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000
[   32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[   32.474139]  ? default_idle_call+0x4d/0x200
[   32.474681]  default_idle_call+0x74/0x200
[   32.475192]  do_idle+0x1d5/0x250
[   32.475612]  cpu_startup_entry+0x19/0x20
[   32.476114]  secondary_startup_64_no_verify+0xb0/0xbb
[   32.476765] Disabling lock debugging due to kernel taint

Fixes: c869f77d6abb ("add mt7601u driver")
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/mediatek/mt7601u/dma.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -160,8 +160,7 @@ mt7601u_rx_process_entry(struct mt7601u_
 
 	if (new_p) {
 		/* we have one extra ref from the allocator */
-		__free_pages(e->p, MT_RX_ORDER);
-
+		put_page(e->p);
 		e->p = new_p;
 	}
 }

[PATCH 4.19 19/37] xen-blkfront: allow discard-* nodes to be optional

[Greg Kroah-Hartman]

From: Roger Pau Monne <roger.pau@citrix.com>

commit 0549cd67b01016b579047bce045b386202a8bcfc upstream.

This is inline with the specification described in blkif.h:

 * discard-granularity: should be set to the physical block size if
   node is not present.
 * discard-alignment, discard-secure: should be set to 0 if node not
   present.

This was detected as QEMU would only create the discard-granularity
node but not discard-alignment, and thus the setup done in
blkfront_setup_discard would fail.

Fix blkfront_setup_discard to not fail on missing nodes, and also fix
blkif_set_queue_limits to set the discard granularity to the physical
block size if none is specified in xenbus.

Fixes: ed30bf317c5ce ('xen-blkfront: Handle discard requests.')
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-By: Arthur Borsboom <arthurborsboom@gmail.com>
Link: https://lore.kernel.org/r/20210119105727.95173-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkfront.c |   20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -936,7 +936,8 @@ static void blkif_set_queue_limits(struc
 	if (info->feature_discard) {
 		blk_queue_flag_set(QUEUE_FLAG_DISCARD, rq);
 		blk_queue_max_discard_sectors(rq, get_capacity(gd));
-		rq->limits.discard_granularity = info->discard_granularity;
+		rq->limits.discard_granularity = info->discard_granularity ?:
+						 info->physical_sector_size;
 		rq->limits.discard_alignment = info->discard_alignment;
 		if (info->feature_secdiscard)
 			blk_queue_flag_set(QUEUE_FLAG_SECERASE, rq);
@@ -2169,19 +2170,12 @@ static void blkfront_closing(struct blkf
 
 static void blkfront_setup_discard(struct blkfront_info *info)
 {
-	int err;
-	unsigned int discard_granularity;
-	unsigned int discard_alignment;
-
 	info->feature_discard = 1;
-	err = xenbus_gather(XBT_NIL, info->xbdev->otherend,
-		"discard-granularity", "%u", &discard_granularity,
-		"discard-alignment", "%u", &discard_alignment,
-		NULL);
-	if (!err) {
-		info->discard_granularity = discard_granularity;
-		info->discard_alignment = discard_alignment;
-	}
+	info->discard_granularity = xenbus_read_unsigned(info->xbdev->otherend,
+							 "discard-granularity",
+							 0);
+	info->discard_alignment = xenbus_read_unsigned(info->xbdev->otherend,
+						       "discard-alignment", 0);
 	info->feature_secdiscard =
 		!!xenbus_read_unsigned(info->xbdev->otherend, "discard-secure",
 				       0);

[PATCH 4.19 20/37] ARM: imx: build suspend-imx6.S with arm instruction set

[Greg Kroah-Hartman]

From: Max Krummenacher <max.oss.09@gmail.com>

commit a88afa46b86ff461c89cc33fc3a45267fff053e8 upstream.

When the kernel is configured to use the Thumb-2 instruction set
"suspend-to-memory" fails to resume. Observed on a Colibri iMX6ULL
(i.MX 6ULL) and Apalis iMX6 (i.MX 6Q).

It looks like the CPU resumes unconditionally in ARM instruction mode
and then chokes on the presented Thumb-2 code it should execute.

Fix this by using the arm instruction set for all code in
suspend-imx6.S.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Fixes: df595746fa69 ("ARM: imx: add suspend in ocram support for i.mx6q")
Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-imx/suspend-imx6.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/mach-imx/suspend-imx6.S
+++ b/arch/arm/mach-imx/suspend-imx6.S
@@ -73,6 +73,7 @@
 #define MX6Q_CCM_CCR	0x0
 
 	.align 3
+	.arm
 
 	.macro  sync_l2_cache
 

[PATCH 4.19 21/37] netfilter: nft_dynset: add timeout extension to template

[Greg Kroah-Hartman]

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 0c5b7a501e7400869ee905b4f7af3d6717802bcb upstream.

Otherwise, the newly create element shows no timeout when listing the
ruleset. If the set definition does not specify a default timeout, then
the set element only shows the expiration time, but not the timeout.
This is a problem when restoring a stateful ruleset listing since it
skips the timeout policy entirely.

Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nft_dynset.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/netfilter/nft_dynset.c
+++ b/net/netfilter/nft_dynset.c
@@ -213,8 +213,10 @@ static int nft_dynset_init(const struct
 		nft_set_ext_add_length(&priv->tmpl, NFT_SET_EXT_EXPR,
 				       priv->expr->ops->size);
 	if (set->flags & NFT_SET_TIMEOUT) {
-		if (timeout || set->timeout)
+		if (timeout || set->timeout) {
+			nft_set_ext_add(&priv->tmpl, NFT_SET_EXT_TIMEOUT);
 			nft_set_ext_add(&priv->tmpl, NFT_SET_EXT_EXPIRATION);
+		}
 	}
 
 	priv->timeout = timeout;

[PATCH 4.19 22/37] xfrm: Fix oops in xfrm_replay_advance_bmp

[Greg Kroah-Hartman]

From: Shmulik Ladkani <shmulik@metanetworks.com>

[ Upstream commit 56ce7c25ae1525d83cf80a880cf506ead1914250 ]

When setting xfrm replay_window to values higher than 32, a rare
page-fault occurs in xfrm_replay_advance_bmp:

  BUG: unable to handle page fault for address: ffff8af350ad7920
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD ad001067 P4D ad001067 PUD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 3 PID: 30 Comm: ksoftirqd/3 Kdump: loaded Not tainted 5.4.52-050452-generic #202007160732
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  RIP: 0010:xfrm_replay_advance_bmp+0xbb/0x130
  RSP: 0018:ffffa1304013ba40 EFLAGS: 00010206
  RAX: 000000000000010d RBX: 0000000000000002 RCX: 00000000ffffff4b
  RDX: 0000000000000018 RSI: 00000000004c234c RDI: 00000000ffb3dbff
  RBP: ffffa1304013ba50 R08: ffff8af330ad7920 R09: 0000000007fffffa
  R10: 0000000000000800 R11: 0000000000000010 R12: ffff8af29d6258c0
  R13: ffff8af28b95c700 R14: 0000000000000000 R15: ffff8af29d6258fc
  FS:  0000000000000000(0000) GS:ffff8af339ac0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8af350ad7920 CR3: 0000000015ee4000 CR4: 00000000001406e0
  Call Trace:
   xfrm_input+0x4e5/0xa10
   xfrm4_rcv_encap+0xb5/0xe0
   xfrm4_udp_encap_rcv+0x140/0x1c0

Analysis revealed offending code is when accessing:

	replay_esn->bmp[nr] |= (1U << bitnr);

with 'nr' being 0x07fffffa.

This happened in an SMP system when reordering of packets was present;
A packet arrived with a "too old" sequence number (outside the window,
i.e 'diff > replay_window'), and therefore the following calculation:

			bitnr = replay_esn->replay_window - (diff - pos);

yields a negative result, but since bitnr is u32 we get a large unsigned
quantity (in crash dump above: 0xffffff4b seen in ecx).

This was supposed to be protected by xfrm_input()'s former call to:

		if (x->repl->check(x, skb, seq)) {

However, the state's spinlock x->lock is *released* after '->check()'
is performed, and gets re-acquired before '->advance()' - which gives a
chance for a different core to update the xfrm state, e.g. by advancing
'replay_esn->seq' when it encounters more packets - leading to a
'diff > replay_window' situation when original core continues to
xfrm_replay_advance_bmp().

An attempt to fix this issue was suggested in commit bcf66bf54aab
("xfrm: Perform a replay check after return from async codepaths"),
by calling 'x->repl->recheck()' after lock is re-acquired, but fix
applied only to asyncronous crypto algorithms.

Augment the fix, by *always* calling 'recheck()' - irrespective if we're
using async crypto.

Fixes: 0ebea8ef3559 ("[IPSEC]: Move state lock into x->type->input")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index 0ee13d12782fb..fcba8a139f61e 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -420,7 +420,7 @@ resume:
 		/* only the first xfrm gets the encap type */
 		encap_type = 0;
 
-		if (async && x->repl->recheck(x, skb, seq)) {
+		if (x->repl->recheck(x, skb, seq)) {
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
 			goto drop_unlock;
 		}
-- 
2.27.0

[PATCH 4.19 23/37] xfrm: fix disable_xfrm sysctl when used on xfrm interfaces

[Greg Kroah-Hartman]

From: Eyal Birger <eyal.birger@gmail.com>

[ Upstream commit 9f8550e4bd9d78a8436c2061ad2530215f875376 ]

The disable_xfrm flag signals that xfrm should not be performed during
routing towards a device before reaching device xmit.

For xfrm interfaces this is usually desired as they perform the outbound
policy lookup as part of their xmit using their if_id.

Before this change enabling this flag on xfrm interfaces prevented them
from xmitting as xfrm_lookup_with_ifid() would not perform a policy lookup
in case the original dst had the DST_NOXFRM flag.

This optimization is incorrect when the lookup is done by the xfrm
interface xmit logic.

Fix by performing policy lookup when invoked by xfrmi as if_id != 0.

Similarly it's unlikely for the 'no policy exists on net' check to yield
any performance benefits when invoked from xfrmi.

Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_policy.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 939f3adf075aa..e9aea82f370de 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -2101,8 +2101,8 @@ struct dst_entry *xfrm_lookup_with_ifid(struct net *net,
 		xflo.flags = flags;
 
 		/* To accelerate a bit...  */
-		if ((dst_orig->flags & DST_NOXFRM) ||
-		    !net->xfrm.policy_count[XFRM_POLICY_OUT])
+		if (!if_id && ((dst_orig->flags & DST_NOXFRM) ||
+			       !net->xfrm.policy_count[XFRM_POLICY_OUT]))
 			goto nopol;
 
 		xdst = xfrm_bundle_lookup(net, fl, family, dir, &xflo, if_id);
-- 
2.27.0

[PATCH 4.19 24/37] RDMA/cxgb4: Fix the reported max_recv_sge value

[Greg Kroah-Hartman]

From: Kamal Heib <kamalheib1@gmail.com>

[ Upstream commit a372173bf314d374da4dd1155549d8ca7fc44709 ]

The max_recv_sge value is wrongly reported when calling query_qp, This is
happening due to a typo when assigning the max_recv_sge value, the value
of sq_max_sges was assigned instead of rq_max_sges.

Fixes: 3e5c02c9ef9a ("iw_cxgb4: Support query_qp() verb")
Link: https://lore.kernel.org/r/20210114191423.423529-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/cxgb4/qp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index a9e3a11bea54a..caa6a502c37e2 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -2485,7 +2485,7 @@ int c4iw_ib_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	init_attr->cap.max_send_wr = qhp->attr.sq_num_entries;
 	init_attr->cap.max_recv_wr = qhp->attr.rq_num_entries;
 	init_attr->cap.max_send_sge = qhp->attr.sq_max_sges;
-	init_attr->cap.max_recv_sge = qhp->attr.sq_max_sges;
+	init_attr->cap.max_recv_sge = qhp->attr.rq_max_sges;
 	init_attr->cap.max_inline_data = T4_MAX_SEND_INLINE;
 	init_attr->sq_sig_type = qhp->sq_sig_all ? IB_SIGNAL_ALL_WR : 0;
 	return 0;
-- 
2.27.0

[PATCH 4.19 25/37] pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 814b84971388cd5fb182f2e914265b3827758455 ]

If the server returns a new stateid that does not match the one in our
cache, then pnfs_layout_process() will leak the layout segments returned
by pnfs_mark_layout_stateid_invalid().

Fixes: 9888d837f3cf ("pNFS: Force a retry of LAYOUTGET if the stateid doesn't match our cache")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pnfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 46ca5592b8b0d..4b165aa5a2561 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -2320,6 +2320,7 @@ out_forget:
 	spin_unlock(&ino->i_lock);
 	lseg->pls_layout = lo;
 	NFS_SERVER(ino)->pnfs_curr_ld->free_lseg(lseg);
+	pnfs_free_lseg_list(&free_me);
 	return ERR_PTR(-EAGAIN);
 }
 
-- 
2.27.0

[PATCH 4.19 26/37] iwlwifi: pcie: use jiffies for memory read spin time limit

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ]

There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().

This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index f48c7cac122e9..fe772b716a8df 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -2126,7 +2126,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
 
 	while (offs < dwords) {
 		/* limit the time we spin here under lock to 1/2s */
-		ktime_t timeout = ktime_add_us(ktime_get(), 500 * USEC_PER_MSEC);
+		unsigned long end = jiffies + HZ / 2;
 
 		if (iwl_trans_grab_nic_access(trans, &flags)) {
 			iwl_write32(trans, HBUS_TARG_MEM_RADDR,
@@ -2137,11 +2137,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
 							HBUS_TARG_MEM_RDAT);
 				offs++;
 
-				/* calling ktime_get is expensive so
-				 * do it once in 128 reads
-				 */
-				if (offs % 128 == 0 && ktime_after(ktime_get(),
-								   timeout))
+				if (time_after(jiffies, end))
 					break;
 			}
 			iwl_trans_release_nic_access(trans, &flags);
-- 
2.27.0

Re: [PATCH 4.19 26/37] iwlwifi: pcie: use jiffies for memory read spin time limit

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1288 bytes --]

Hi!

> From: Johannes Berg <johannes.berg@intel.com>
> 
> [ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ]
> 
> There's no reason to use ktime_get() since we don't need any better
> precision than jiffies, and since we no longer disable interrupts
> around this code (when grabbing NIC access), jiffies will work fine.
> Use jiffies instead of ktime_get().
> 
> This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
> in long-running memory reads". The code gets simpler with the weird clock use
> etc. removed before we add cond_resched().

As far as I can tell, this is not really suitable for v4.19 (and
probably others), as we still disable interrupts in
iwl_trans_pcie_release_nic_access() in 4.19.

Best regards,
								Pavel
								

> @@ -2137,11 +2137,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
>  							HBUS_TARG_MEM_RDAT);
>  				offs++;
>  
> -				/* calling ktime_get is expensive so
> -				 * do it once in 128 reads
> -				 */
> -				if (offs % 128 == 0 && ktime_after(ktime_get(),
> -								   timeout))
> +				if (time_after(jiffies, end))
>  					break;
>  			}
>  			iwl_trans_release_nic_access(trans, &flags);

-- 
http://www.livejournal.com/~pavelmachek

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCH 4.19 27/37] iwlwifi: pcie: reschedule in long-running memory reads

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 3d372c4edfd4dffb7dea71c6b096fb414782b776 ]

If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as

  watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]

This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.

Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.

In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
index fe772b716a8df..fcda33482887b 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c
@@ -2127,6 +2127,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
 	while (offs < dwords) {
 		/* limit the time we spin here under lock to 1/2s */
 		unsigned long end = jiffies + HZ / 2;
+		bool resched = false;
 
 		if (iwl_trans_grab_nic_access(trans, &flags)) {
 			iwl_write32(trans, HBUS_TARG_MEM_RADDR,
@@ -2137,10 +2138,15 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr,
 							HBUS_TARG_MEM_RDAT);
 				offs++;
 
-				if (time_after(jiffies, end))
+				if (time_after(jiffies, end)) {
+					resched = true;
 					break;
+				}
 			}
 			iwl_trans_release_nic_access(trans, &flags);
+
+			if (resched)
+				cond_resched();
 		} else {
 			return -EBUSY;
 		}
-- 
2.27.0

[PATCH 4.19 28/37] mac80211: pause TX while changing interface type

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 054c9939b4800a91475d8d89905827bf9e1ad97a ]

syzbot reported a crash that happened when changing the interface
type around a lot, and while it might have been easy to fix just
the symptom there, a little deeper investigation found that really
the reason is that we allowed packets to be transmitted while in
the middle of changing the interface type.

Disallow TX by stopping the queues while changing the type.

Fixes: 34d4bc4d41d2 ("mac80211: support runtime interface type changes")
Reported-by: syzbot+d7a3b15976bf7de2238a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20210122171115.b321f98f4d4f.I6997841933c17b093535c31d29355be3c0c39628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h | 1 +
 net/mac80211/iface.c       | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index a879d8071712b..fc715bba59146 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1051,6 +1051,7 @@ enum queue_stop_reason {
 	IEEE80211_QUEUE_STOP_REASON_FLUSH,
 	IEEE80211_QUEUE_STOP_REASON_TDLS_TEARDOWN,
 	IEEE80211_QUEUE_STOP_REASON_RESERVE_TID,
+	IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE,
 
 	IEEE80211_QUEUE_STOP_REASONS,
 };
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 152d4365f9616..511ca6f74239d 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1542,6 +1542,10 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 	if (ret)
 		return ret;
 
+	ieee80211_stop_vif_queues(local, sdata,
+				  IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE);
+	synchronize_net();
+
 	ieee80211_do_stop(sdata, false);
 
 	ieee80211_teardown_sdata(sdata);
@@ -1562,6 +1566,8 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
 	err = ieee80211_do_open(&sdata->wdev, false);
 	WARN(err, "type change: do_open returned %d", err);
 
+	ieee80211_wake_vif_queues(local, sdata,
+				  IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE);
 	return ret;
 }
 
-- 
2.27.0

[PATCH 4.19 29/37] net/mlx5: Fix memory leak on flow table creation error flow

[Greg Kroah-Hartman]

From: Roi Dayan <roid@nvidia.com>

[ Upstream commit 487c6ef81eb98d0a43cb08be91b1fcc9b4250626 ]

When we create the ft object we also init rhltable in ft->fgs_hash.
So in error flow before kfree of ft we need to destroy that rhltable.

Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index b16e0f45d28c5..a38a0c86705ab 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -1004,6 +1004,7 @@ static struct mlx5_flow_table *__mlx5_create_flow_table(struct mlx5_flow_namespa
 destroy_ft:
 	root->cmds->destroy_flow_table(root->dev, ft);
 free_ft:
+	rhltable_destroy(&ft->fgs_hash);
 	kfree(ft);
 unlock_root:
 	mutex_unlock(&root->chain_lock);
-- 
2.27.0

[PATCH 4.19 30/37] can: dev: prevent potential information leak in can_fill_info()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ]

The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.

Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index 953c6fdc75cc4..1bd181b33c24f 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -1142,7 +1142,7 @@ static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 	struct can_ctrlmode cm = {.flags = priv->ctrlmode};
-	struct can_berr_counter bec;
+	struct can_berr_counter bec = { };
 	enum can_state state = priv->state;
 
 	if (priv->do_get_state)
-- 
2.27.0

[PATCH 4.19 31/37] iommu/vt-d: Gracefully handle DMAR units with no supported address widths

[Greg Kroah-Hartman]

From: David Woodhouse <dwmw@amazon.co.uk>

commit c40aaaac1018ff1382f2d35df5129a6bcea3df6b upstream.

Instead of bailing out completely, such a unit can still be used for
interrupt remapping.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/linux-iommu/549928db2de6532117f36c9c810373c14cf76f51.camel@infradead.org/
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ context change due to moving drivers/iommu/dmar.c to
  drivers/iommu/intel/dmar.c ]
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/dmar.c |   46 +++++++++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 15 deletions(-)

--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1029,8 +1029,8 @@ static int alloc_iommu(struct dmar_drhd_
 {
 	struct intel_iommu *iommu;
 	u32 ver, sts;
-	int agaw = 0;
-	int msagaw = 0;
+	int agaw = -1;
+	int msagaw = -1;
 	int err;
 
 	if (!drhd->reg_base_addr) {
@@ -1055,17 +1055,28 @@ static int alloc_iommu(struct dmar_drhd_
 	}
 
 	err = -EINVAL;
-	agaw = iommu_calculate_agaw(iommu);
-	if (agaw < 0) {
-		pr_err("Cannot get a valid agaw for iommu (seq_id = %d)\n",
-			iommu->seq_id);
-		goto err_unmap;
-	}
-	msagaw = iommu_calculate_max_sagaw(iommu);
-	if (msagaw < 0) {
-		pr_err("Cannot get a valid max agaw for iommu (seq_id = %d)\n",
-			iommu->seq_id);
-		goto err_unmap;
+	if (cap_sagaw(iommu->cap) == 0) {
+		pr_info("%s: No supported address widths. Not attempting DMA translation.\n",
+			iommu->name);
+		drhd->ignored = 1;
+	}
+
+	if (!drhd->ignored) {
+		agaw = iommu_calculate_agaw(iommu);
+		if (agaw < 0) {
+			pr_err("Cannot get a valid agaw for iommu (seq_id = %d)\n",
+			       iommu->seq_id);
+			drhd->ignored = 1;
+		}
+	}
+	if (!drhd->ignored) {
+		msagaw = iommu_calculate_max_sagaw(iommu);
+		if (msagaw < 0) {
+			pr_err("Cannot get a valid max agaw for iommu (seq_id = %d)\n",
+			       iommu->seq_id);
+			drhd->ignored = 1;
+			agaw = -1;
+		}
 	}
 	iommu->agaw = agaw;
 	iommu->msagaw = msagaw;
@@ -1092,7 +1103,12 @@ static int alloc_iommu(struct dmar_drhd_
 
 	raw_spin_lock_init(&iommu->register_lock);
 
-	if (intel_iommu_enabled) {
+	/*
+	 * This is only for hotplug; at boot time intel_iommu_enabled won't
+	 * be set yet. When intel_iommu_init() runs, it registers the units
+	 * present at boot time, then sets intel_iommu_enabled.
+	 */
+	if (intel_iommu_enabled && !drhd->ignored) {
 		err = iommu_device_sysfs_add(&iommu->iommu, NULL,
 					     intel_iommu_groups,
 					     "%s", iommu->name);
@@ -1121,7 +1137,7 @@ error:
 
 static void free_iommu(struct intel_iommu *iommu)
 {
-	if (intel_iommu_enabled) {
+	if (intel_iommu_enabled && iommu->iommu.ops) {
 		iommu_device_unregister(&iommu->iommu);
 		iommu_device_sysfs_remove(&iommu->iommu);
 	}

[PATCH 4.19 32/37] iommu/vt-d: Dont dereference iommu_device if IOMMU_API is not built

[Greg Kroah-Hartman]

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

commit 9def3b1a07c41e21c68a0eb353e3e569fdd1d2b1 upstream.

Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.

This fixes the following build error when IOMMU_API is not selected:

drivers/iommu/dmar.c: In function ‘free_iommu’:
drivers/iommu/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
 1139 |  if (intel_iommu_enabled && iommu->iommu.ops) {
                                                ^

Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[ - context change due to moving drivers/iommu/dmar.c to
    drivers/iommu/intel/dmar.c
  - set the drhr in the iommu like in upstream commit b1012ca8dc4f
    ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") ]
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/dmar.c        |    3 ++-
 include/linux/intel-iommu.h |    2 ++
 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1123,6 +1123,7 @@ static int alloc_iommu(struct dmar_drhd_
 	}
 
 	drhd->iommu = iommu;
+	iommu->drhd = drhd;
 
 	return 0;
 
@@ -1137,7 +1138,7 @@ error:
 
 static void free_iommu(struct intel_iommu *iommu)
 {
-	if (intel_iommu_enabled && iommu->iommu.ops) {
+	if (intel_iommu_enabled && !iommu->drhd->ignored) {
 		iommu_device_unregister(&iommu->iommu);
 		iommu_device_sysfs_remove(&iommu->iommu);
 	}
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -472,6 +472,8 @@ struct intel_iommu {
 	struct iommu_device iommu;  /* IOMMU core code handle */
 	int		node;
 	u32		flags;      /* Software defined flags */
+
+	struct dmar_drhd_unit *drhd;
 };
 
 /* PCI domain-device relationship */

[PATCH 4.19 33/37] rxrpc: Fix memory leak in rxrpc_lookup_local

[Greg Kroah-Hartman]

From: Takeshi Misawa <jeliantsurux@gmail.com>

commit b8323f7288abd71794cd7b11a4c0a38b8637c8b5 upstream.

Commit 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Then release ref in __rxrpc_put_peer and rxrpc_put_peer_locked.

	struct rxrpc_peer *rxrpc_alloc_peer(struct rxrpc_local *local, gfp_t gfp)
	-               peer->local = local;
	+               peer->local = rxrpc_get_local(local);

rxrpc_discard_prealloc also need ref release in discarding.

syzbot report:
BUG: memory leak
unreferenced object 0xffff8881080ddc00 (size 256):
  comm "syz-executor339", pid 8462, jiffies 4294942238 (age 12.350s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 0a 00 00 00 00 c0 00 08 81 88 ff ff  ................
  backtrace:
    [<000000002b6e495f>] kmalloc include/linux/slab.h:552 [inline]
    [<000000002b6e495f>] kzalloc include/linux/slab.h:682 [inline]
    [<000000002b6e495f>] rxrpc_alloc_local net/rxrpc/local_object.c:79 [inline]
    [<000000002b6e495f>] rxrpc_lookup_local+0x1c1/0x760 net/rxrpc/local_object.c:244
    [<000000006b43a77b>] rxrpc_bind+0x174/0x240 net/rxrpc/af_rxrpc.c:149
    [<00000000fd447a55>] afs_open_socket+0xdb/0x200 fs/afs/rxrpc.c:64
    [<000000007fd8867c>] afs_net_init+0x2b4/0x340 fs/afs/main.c:126
    [<0000000063d80ec1>] ops_init+0x4e/0x190 net/core/net_namespace.c:152
    [<00000000073c5efa>] setup_net+0xde/0x2d0 net/core/net_namespace.c:342
    [<00000000a6744d5b>] copy_net_ns+0x19f/0x3e0 net/core/net_namespace.c:483
    [<0000000017d3aec3>] create_new_namespaces+0x199/0x4f0 kernel/nsproxy.c:110
    [<00000000186271ef>] unshare_nsproxy_namespaces+0x9b/0x120 kernel/nsproxy.c:226
    [<000000002de7bac4>] ksys_unshare+0x2fe/0x5c0 kernel/fork.c:2957
    [<00000000349b12ba>] __do_sys_unshare kernel/fork.c:3025 [inline]
    [<00000000349b12ba>] __se_sys_unshare kernel/fork.c:3023 [inline]
    [<00000000349b12ba>] __x64_sys_unshare+0x12/0x20 kernel/fork.c:3023
    [<000000006d178ef7>] do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
    [<00000000637076d4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Takeshi Misawa <jeliantsurux@gmail.com>
Reported-and-tested-by: syzbot+305326672fed51b205f7@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161183091692.3506637.3206605651502458810.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/rxrpc/call_accept.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/rxrpc/call_accept.c
+++ b/net/rxrpc/call_accept.c
@@ -211,6 +211,7 @@ void rxrpc_discard_prealloc(struct rxrpc
 	tail = b->peer_backlog_tail;
 	while (CIRC_CNT(head, tail, size) > 0) {
 		struct rxrpc_peer *peer = b->peer_backlog[tail];
+		rxrpc_put_local(peer->local);
 		kfree(peer);
 		tail = (tail + 1) & (size - 1);
 	}

[PATCH 4.19 34/37] NFC: fix resource leak when target index is invalid

[Greg Kroah-Hartman]

From: Pan Bian <bianpan2016@163.com>

commit 3a30537cee233fb7da302491b28c832247d89bbe upstream.

Goto to the label put_dev instead of the label error to fix potential
resource leak on path that the target index is invalid.

Fixes: c4fbb6515a4d ("NFC: The core part should generate the target index")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121152748.98409-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/nfc/rawsock.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/nfc/rawsock.c
+++ b/net/nfc/rawsock.c
@@ -117,7 +117,7 @@ static int rawsock_connect(struct socket
 	if (addr->target_idx > dev->target_next_idx - 1 ||
 	    addr->target_idx < dev->target_next_idx - dev->n_targets) {
 		rc = -EINVAL;
-		goto error;
+		goto put_dev;
 	}
 
 	rc = nfc_activate_target(dev, addr->target_idx, addr->nfc_protocol);

[PATCH 4.19 35/37] NFC: fix possible resource leak

[Greg Kroah-Hartman]

From: Pan Bian <bianpan2016@163.com>

commit d8f923c3ab96dbbb4e3c22d1afc1dc1d3b195cd8 upstream.

Put the device to avoid resource leak on path that the polling flag is
invalid.

Fixes: a831b9132065 ("NFC: Do not return EBUSY when stopping a poll that's already stopped")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121153745.122184-1-bianpan2016@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/nfc/netlink.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -871,6 +871,7 @@ static int nfc_genl_stop_poll(struct sk_
 
 	if (!dev->polling) {
 		device_unlock(&dev->dev);
+		nfc_put_device(dev);
 		return -EINVAL;
 	}
 

[PATCH 4.19 36/37] team: protect features update by RCU to avoid deadlock

[Greg Kroah-Hartman]

From: Ivan Vecera <ivecera@redhat.com>

commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream.

Function __team_compute_features() is protected by team->lock
mutex when it is called from team_compute_features() used when
features of an underlying device is changed. This causes
a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device
is fired due to change propagated from team driver (e.g. MTU
change). It's because callbacks like team_change_mtu() or
team_vlan_rx_{add,del}_vid() protect their port list traversal
by team->lock mutex.

Example (r8169 case where this driver disables TSO for certain MTU
values):
...
[ 6391.348202]  __mutex_lock.isra.6+0x2d0/0x4a0
[ 6391.358602]  team_device_event+0x9d/0x160 [team]
[ 6391.363756]  notifier_call_chain+0x47/0x70
[ 6391.368329]  netdev_update_features+0x56/0x60
[ 6391.373207]  rtl8169_change_mtu+0x14/0x50 [r8169]
[ 6391.378457]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.387022]  dev_set_mtu+0x52/0x90
[ 6391.390820]  team_change_mtu+0x64/0xf0 [team]
[ 6391.395683]  dev_set_mtu_ext+0xe1/0x1d0
[ 6391.399963]  do_setlink+0x231/0xf50
...

In fact team_compute_features() called from team_device_event()
does not need to be protected by team->lock mutex and rcu_read_lock()
is sufficient there for port list traversal.

Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/team/team.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -998,7 +998,8 @@ static void __team_compute_features(stru
 	unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE |
 					IFF_XMIT_DST_RELEASE_PERM;
 
-	list_for_each_entry(port, &team->port_list, list) {
+	rcu_read_lock();
+	list_for_each_entry_rcu(port, &team->port_list, list) {
 		vlan_features = netdev_increment_features(vlan_features,
 					port->dev->vlan_features,
 					TEAM_VLAN_FEATURES);
@@ -1012,6 +1013,7 @@ static void __team_compute_features(stru
 		if (port->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = port->dev->hard_header_len;
 	}
+	rcu_read_unlock();
 
 	team->dev->vlan_features = vlan_features;
 	team->dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
@@ -1027,9 +1029,7 @@ static void __team_compute_features(stru
 
 static void team_compute_features(struct team *team)
 {
-	mutex_lock(&team->lock);
 	__team_compute_features(team);
-	mutex_unlock(&team->lock);
 	netdev_change_features(team->dev);
 }
 

[PATCH 4.19 37/37] tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN

[Greg Kroah-Hartman]

From: Pengcheng Yang <yangpc@wangsu.com>

commit 62d9f1a6945ba69c125e548e72a36d203b30596e upstream.

Upon receiving a cumulative ACK that changes the congestion state from
Disorder to Open, the TLP timer is not set. If the sender is app-limited,
it can only wait for the RTO timer to expire and retransmit.

The reason for this is that the TLP timer is set before the congestion
state changes in tcp_ack(), so we delay the time point of calling
tcp_set_xmit_timer() until after tcp_fastretrans_alert() returns and
remove the FLAG_SET_XMIT_TIMER from ack_flag when the RACK reorder timer
is set.

This commit has two additional benefits:
1) Make sure to reset RTO according to RFC6298 when receiving ACK, to
avoid spurious RTO caused by RTO timer early expires.
2) Reduce the xmit timer reschedule once per ACK when the RACK reorder
timer is set.

Fixes: df92c8394e6e ("tcp: fix xmit timer to only be reset if data ACKed/SACKed")
Link: https://lore.kernel.org/netdev/1611311242-6675-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/1611464834-23030-1-git-send-email-yangpc@wangsu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/tcp.h       |    2 +-
 net/ipv4/tcp_input.c    |   10 ++++++----
 net/ipv4/tcp_recovery.c |    5 +++--
 3 files changed, 10 insertions(+), 7 deletions(-)

--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1961,7 +1961,7 @@ void tcp_mark_skb_lost(struct sock *sk,
 void tcp_newreno_mark_lost(struct sock *sk, bool snd_una_advanced);
 extern s32 tcp_rack_skb_timeout(struct tcp_sock *tp, struct sk_buff *skb,
 				u32 reo_wnd);
-extern void tcp_rack_mark_lost(struct sock *sk);
+extern bool tcp_rack_mark_lost(struct sock *sk);
 extern void tcp_rack_advance(struct tcp_sock *tp, u8 sacked, u32 end_seq,
 			     u64 xmit_time);
 extern void tcp_rack_reo_timeout(struct sock *sk);
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2750,7 +2750,8 @@ static void tcp_identify_packet_loss(str
 	} else if (tcp_is_rack(sk)) {
 		u32 prior_retrans = tp->retrans_out;
 
-		tcp_rack_mark_lost(sk);
+		if (tcp_rack_mark_lost(sk))
+			*ack_flag &= ~FLAG_SET_XMIT_TIMER;
 		if (prior_retrans > tp->retrans_out)
 			*ack_flag |= FLAG_LOST_RETRANS;
 	}
@@ -3693,9 +3694,6 @@ static int tcp_ack(struct sock *sk, cons
 
 	if (tp->tlp_high_seq)
 		tcp_process_tlp_ack(sk, ack, flag);
-	/* If needed, reset TLP/RTO timer; RACK may later override this. */
-	if (flag & FLAG_SET_XMIT_TIMER)
-		tcp_set_xmit_timer(sk);
 
 	if (tcp_ack_is_dubious(sk, flag)) {
 		is_dupack = !(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP));
@@ -3703,6 +3701,10 @@ static int tcp_ack(struct sock *sk, cons
 				      &rexmit);
 	}
 
+	/* If needed, reset TLP/RTO timer when RACK doesn't set. */
+	if (flag & FLAG_SET_XMIT_TIMER)
+		tcp_set_xmit_timer(sk);
+
 	if ((flag & FLAG_FORWARD_PROGRESS) || !(flag & FLAG_NOT_DUP))
 		sk_dst_confirm(sk);
 
--- a/net/ipv4/tcp_recovery.c
+++ b/net/ipv4/tcp_recovery.c
@@ -109,13 +109,13 @@ static void tcp_rack_detect_loss(struct
 	}
 }
 
-void tcp_rack_mark_lost(struct sock *sk)
+bool tcp_rack_mark_lost(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	u32 timeout;
 
 	if (!tp->rack.advanced)
-		return;
+		return false;
 
 	/* Reset the advanced flag to avoid unnecessary queue scanning */
 	tp->rack.advanced = 0;
@@ -125,6 +125,7 @@ void tcp_rack_mark_lost(struct sock *sk)
 		inet_csk_reset_xmit_timer(sk, ICSK_TIME_REO_TIMEOUT,
 					  timeout, inet_csk(sk)->icsk_rto);
 	}
+	return !!timeout;
 }
 
 /* Record the most recently (re)sent time among the (s)acked packets

Re: [PATCH 4.19 00/37] 4.19.173-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 671 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.173 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any problems here:

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
                                                                Pavel
								
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/37] 4.19.173-rc1 review

[Naresh Kamboju]

On Tue, 2 Feb 2021 at 19:24, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.173 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 04 Feb 2021 13:29:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.173-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 4.19.173-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 5230df3466ef513b7813df2e707dc5d4cf7602cc
git describe: v4.19.172-38-g5230df3466ef
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.172-38-g5230df3466ef

No regressions (compared to build v4.19.172)

No fixes (compared to build v4.19.172)

Ran 48365 total tests in the following environments and test suites.

Environments
--------------
- arm
- arm64
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- mips
- nxp-ls2088
- nxp-ls2088-64k_page_size
- qemu-arm64-clang
- qemu-arm64-kasan
- qemu-x86_64-clang
- qemu-x86_64-kasan
- qemu_arm
- qemu_arm64
- qemu_arm64-compat
- qemu_i386
- qemu_x86_64
- qemu_x86_64-compat
- s390
- sparc
- x15 - arm
- x86_64
- x86-kasan
- x86_64

Test Suites
-----------
* build
* linux-log-parser
* install-android-platform-tools-r2600
* kselftest
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-intel_pstate
* kselftest-kvm
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-ptrace
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-zram
* libhugetlbfs
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-tracing-tests
* perf
* fwts
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-lib
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* ltp-cap_bounds-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-mm-tests
* network-basic-tests
* v4l2-compliance
* kselftest-kexec
* kselftest-vm
* kselftest-x86
* ltp-open-posix-tests
* ltp-syscalls-tests
* kvm-unit-tests
* rcutorture
* prep-tmp-disk
* ssuite
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/37] 4.19.173-rc1 review

[Shuah Khan]

On 2/2/21 6:38 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.173 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 04 Feb 2021 13:29:33 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.173-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/37] 4.19.173-rc1 review

[Guenter Roeck]

On Tue, Feb 02, 2021 at 02:38:43PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.173 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu, 04 Feb 2021 13:29:33 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 418 pass: 418 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter