[PATCH v2] drm/qxl: do not run release if qxl failed to init

[PATCH v2] drm/qxl: do not run release if qxl failed to init

[Tong Zhang]

if qxl_device_init() fail, drm device will not be registered,
in this case, do not run qxl_drm_release()

[    5.258534] ==================================================================
[    5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.259388] Write of size 8 at addr 00000000000014dc by task modprobe/95
[    5.259754]
[    5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc6-00007-g88bb507a74ea #62
[    5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda54
[    5.260917] Call Trace:
[    5.261056]  dump_stack+0x7d/0xa3
[    5.261245]  kasan_report.cold+0x10c/0x10e
[    5.261475]  ? qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.261789]  check_memory_region+0x17c/0x1e0
[    5.262029]  qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[    5.262332]  qxl_modeset_fini+0x9/0x20 [qxl]
[    5.262595]  qxl_drm_release+0x22/0x30 [qxl]
[    5.262841]  drm_dev_release+0x32/0x50
[    5.263047]  release_nodes+0x39e/0x410
[    5.263253]  ? devres_release+0x40/0x40
[    5.263462]  really_probe+0x2ea/0x420
[    5.263664]  driver_probe_device+0x6d/0xd0
[    5.263888]  device_driver_attach+0x82/0x90
[    5.264116]  ? device_driver_attach+0x90/0x90
[    5.264353]  __driver_attach+0x60/0x100
[    5.264563]  ? device_driver_attach+0x90/0x90
[    5.264801]  bus_for_each_dev+0xe1/0x140
[    5.265014]  ? subsys_dev_iter_exit+0x10/0x10
[    5.265251]  ? klist_node_init+0x61/0x80
[    5.265464]  bus_add_driver+0x254/0x2a0
[    5.265673]  driver_register+0xd3/0x150
[    5.265882]  ? 0xffffffffc0048000
[    5.266064]  do_one_initcall+0x84/0x250
[    5.266274]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    5.266596]  ? unpoison_range+0xf/0x30
[    5.266801]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    5.267082]  ? unpoison_range+0xf/0x30
[    5.267287]  ? unpoison_range+0xf/0x30
[    5.267491]  do_init_module+0xf8/0x350
[    5.267697]  load_module+0x3fe6/0x4340
[    5.267902]  ? vm_unmap_ram+0x1d0/0x1d0
[    5.268115]  ? module_frob_arch_sections+0x20/0x20
[    5.268375]  ? __do_sys_finit_module+0x108/0x170
[    5.268624]  __do_sys_finit_module+0x108/0x170
[    5.268865]  ? __ia32_sys_init_module+0x40/0x40
[    5.269111]  ? file_open_root+0x200/0x200
[    5.269330]  ? do_sys_open+0x85/0xe0
[    5.269527]  ? filp_open+0x50/0x50
[    5.269714]  ? exit_to_user_mode_prepare+0xfc/0x130
[    5.269978]  do_syscall_64+0x33/0x40
[    5.270176]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    5.270450] RIP: 0033:0x7fa3f685bcf7
[    5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1
[    5.271634] RSP: 002b:00007ffca83048d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    5.272037] RAX: ffffffffffffffda RBX: 0000000001e94a70 RCX: 00007fa3f685bcf7
[    5.272416] RDX: 0000000000000000 RSI: 0000000001e939e0 RDI: 0000000000000003
[    5.272794] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    5.273171] R10: 00007fa3f68bf300 R11: 0000000000000246 R12: 0000000001e939e0
[    5.273550] R13: 0000000000000000 R14: 0000000001e93bd0 R15: 0000000000000001
[    5.273928] ==================================================================

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
---
v2: use qdev->ddev.mode_config.funcs instead of dev->registered, since
mode_config.funcs will only be set if qxl_modeset_init() returns 0

 drivers/gpu/drm/qxl/qxl_drv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 6e7f16f4cec7..839d9e7a5765 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -144,6 +144,8 @@ static void qxl_drm_release(struct drm_device *dev)
 	 * reodering qxl_modeset_fini() + qxl_device_fini() calls is
 	 * non-trivial though.
 	 */
+	if (!qdev->ddev.mode_config.funcs)
+	  return;
 	qxl_modeset_fini(qdev);
 	qxl_device_fini(qdev);
 }
-- 
2.25.1

Re: [PATCH v2] drm/qxl: do not run release if qxl failed to init

[Gerd Hoffmann]

On Thu, Feb 04, 2021 at 11:30:50AM -0500, Tong Zhang wrote:
> if qxl_device_init() fail, drm device will not be registered,
> in this case, do not run qxl_drm_release()

How do you trigger this?

take care,
  Gerd

Re: [PATCH v2] drm/qxl: do not run release if qxl failed to init

[Tong Zhang]

On Feb 5, 2021, at 2:43 AM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> 
> On Thu, Feb 04, 2021 at 11:30:50AM -0500, Tong Zhang wrote:
>> if qxl_device_init() fail, drm device will not be registered,
>> in this case, do not run qxl_drm_release()
> 
> How do you trigger this?
> 

This can be triggered by changing the QXL VGA rom magic value.

In the QEMU source code ./hw/display/qxl.c
or change the QXL_ROM_MAGIC in spice header file

- Tong

> take care,
>  Gerd
>