* [PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes
@ 2021-02-15 16:26 Jonathan Marek
2021-02-15 16:26 ` [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display Jonathan Marek
2021-02-15 16:26 ` [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
0 siblings, 2 replies; 7+ messages in thread
From: Jonathan Marek @ 2021-02-15 16:26 UTC (permalink / raw)
To: linux-arm-msm
Cc: Andy Gross, Bjorn Andersson, Daniel Vetter, David Airlie,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Dmitry Baryshkov, Drew Davenport,
open list:DRM DRIVER FOR MSM ADRENO GPU, Eric Anholt,
open list:DRM DRIVER FOR MSM ADRENO GPU, Jeykumar Sankaran,
Jordan Crouse, Kalyan Thota, open list, Qinglang Miao,
Rajendra Nayak, Rob Clark, Rob Herring, Sean Paul, Tanmay Shah,
tongtiangen
Add sm8150/sm8250 compatibles to drm/msm and fix the sm8250
display nodes.
v2: do not remove mmcx-supply from dispcc node
v3: remove references to dp_phy (missed this in v2, sorry for the spam)
Jonathan Marek (2):
drm/msm: add compatibles for sm8150/sm8250 display
arm64: dts: qcom: sm8250: fix display nodes
.../devicetree/bindings/display/msm/dpu.txt | 4 +--
arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++--------------
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
drivers/gpu/drm/msm/msm_drv.c | 6 ++--
4 files changed, 15 insertions(+), 28 deletions(-)
--
2.26.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display
2021-02-15 16:26 [PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
@ 2021-02-15 16:26 ` Jonathan Marek
2021-03-05 21:46 ` Rob Herring
2021-02-15 16:26 ` [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
1 sibling, 1 reply; 7+ messages in thread
From: Jonathan Marek @ 2021-02-15 16:26 UTC (permalink / raw)
To: linux-arm-msm
Cc: Rob Clark, Sean Paul, David Airlie, Daniel Vetter, Rob Herring,
Jordan Crouse, Kalyan Thota, Eric Anholt, Tanmay Shah,
Drew Davenport, Jeykumar Sankaran, Rajendra Nayak, tongtiangen,
Qinglang Miao, open list:DRM DRIVER FOR MSM ADRENO GPU,
open list:DRM DRIVER FOR MSM ADRENO GPU,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
The driver already has support for sm8150/sm8250, but the compatibles were
never added.
Also inverse the non-mdp4 condition in add_display_components() to avoid
having to check every new compatible in the condition.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
drivers/gpu/drm/msm/msm_drv.c | 6 +++---
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/msm/dpu.txt b/Documentation/devicetree/bindings/display/msm/dpu.txt
index 551ae26f60da..5763f43200a0 100644
--- a/Documentation/devicetree/bindings/display/msm/dpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/dpu.txt
@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
MDSS:
Required properties:
-- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
+- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss", "qcom,sm8150-mdss", "qcom,sm8250-mdss"
- reg: physical base address and length of contoller's registers.
- reg-names: register region names. The following region is required:
* "mdss"
@@ -41,7 +41,7 @@ Optional properties:
MDP:
Required properties:
-- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu", "qcom,sm8150-dpu", "qcom,sm8250-dpu"
- reg: physical base address and length of controller's registers.
- reg-names : register region names. The following region is required:
* "mdp"
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5a8e3e1fc48c..fff12a4c8bfc 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1219,6 +1219,8 @@ static const struct dev_pm_ops dpu_pm_ops = {
static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sdm845-dpu", },
{ .compatible = "qcom,sc7180-dpu", },
+ { .compatible = "qcom,sm8150-dpu", },
+ { .compatible = "qcom,sm8250-dpu", },
{}
};
MODULE_DEVICE_TABLE(of, dpu_dt_match);
diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c
index 94525ac76d4e..928f13d4bfbc 100644
--- a/drivers/gpu/drm/msm/msm_drv.c
+++ b/drivers/gpu/drm/msm/msm_drv.c
@@ -1185,9 +1185,7 @@ static int add_display_components(struct device *dev,
* Populate the children devices, find the MDP5/DPU node, and then add
* the interfaces to our components list.
*/
- if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
- of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
- of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
+ if (!of_device_is_compatible(dev->of_node, "qcom,mdp4")) {
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
DRM_DEV_ERROR(dev, "failed to populate children devices\n");
@@ -1320,6 +1318,8 @@ static const struct of_device_id dt_match[] = {
{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
{ .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
+ { .compatible = "qcom,sm8150-mdss", .data = (void *)KMS_DPU },
+ { .compatible = "qcom,sm8250-mdss", .data = (void *)KMS_DPU },
{}
};
MODULE_DEVICE_TABLE(of, dt_match);
--
2.26.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes
2021-02-15 16:26 [PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
2021-02-15 16:26 ` [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display Jonathan Marek
@ 2021-02-15 16:26 ` Jonathan Marek
2021-02-16 21:14 ` Dmitry Baryshkov
1 sibling, 1 reply; 7+ messages in thread
From: Jonathan Marek @ 2021-02-15 16:26 UTC (permalink / raw)
To: linux-arm-msm
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Dmitry Baryshkov,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Apply these fixes to the newly added sm8250 display ndoes
- Use sm8250 compatibles instead of sdm845 compatibles
- Remove "notused" interconnect (which apparently was blindly copied from
my old patches)
- Use dispcc node example from dt-bindings, removing clocks which aren't
documented or used by the driver and fixing the region size.
Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
1 file changed, 8 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 947e1accae3a..693ac533f9b6 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
};
mdss: mdss@ae00000 {
- compatible = "qcom,sdm845-mdss";
+ compatible = "qcom,sm8250-mdss";
reg = <0 0x0ae00000 0 0x1000>;
reg-names = "mdss";
- interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
- <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
<&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
- interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
+ interconnect-names = "mdp0-mem", "mdp1-mem";
power-domains = <&dispcc MDSS_GDSC>;
@@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
ranges;
mdss_mdp: mdp@ae01000 {
- compatible = "qcom,sdm845-dpu";
+ compatible = "qcom,sm8250-dpu";
reg = <0 0x0ae01000 0 0x8f000>,
<0 0x0aeb0000 0 0x2008>;
reg-names = "mdp", "vbif";
@@ -2580,7 +2579,7 @@ opp-358000000 {
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
- reg = <0 0x0af00000 0 0x20000>;
+ reg = <0 0x0af00000 0 0x10000>;
mmcx-supply = <&mmcx_reg>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&dsi0_phy 0>,
@@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
<&dsi1_phy 0>,
<&dsi1_phy 1>,
<0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <0>,
- <&sleep_clk>;
+ <0>;
clock-names = "bi_tcxo",
"dsi0_phy_pll_out_byteclk",
"dsi0_phy_pll_out_dsiclk",
"dsi1_phy_pll_out_byteclk",
"dsi1_phy_pll_out_dsiclk",
- "dp_link_clk_divsel_ten",
- "dp_vco_divided_clk_src_mux",
- "dptx1_phy_pll_link_clk",
- "dptx1_phy_pll_vco_div_clk",
- "dptx2_phy_pll_link_clk",
- "dptx2_phy_pll_vco_div_clk",
- "edp_phy_pll_link_clk",
- "edp_phy_pll_vco_div_clk",
- "sleep_clk";
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
--
2.26.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes
2021-02-15 16:26 ` [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
@ 2021-02-16 21:14 ` Dmitry Baryshkov
2021-03-11 0:10 ` Bjorn Andersson
0 siblings, 1 reply; 7+ messages in thread
From: Dmitry Baryshkov @ 2021-02-16 21:14 UTC (permalink / raw)
To: Jonathan Marek
Cc: open list:DRM DRIVER FOR MSM ADRENO GPU, Andy Gross,
Bjorn Andersson, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
Except for the compatible value changes:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
May I suggest to split the compatibility name changes into a separate
series from this patch (without it the patch stands a chance of being
accepted into the stable tree, if I'm not mistaken).
On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@marek.ca> wrote:
>
> Apply these fixes to the newly added sm8250 display ndoes
> - Use sm8250 compatibles instead of sdm845 compatibles
> - Remove "notused" interconnect (which apparently was blindly copied from
> my old patches)
> - Use dispcc node example from dt-bindings, removing clocks which aren't
> documented or used by the driver and fixing the region size.
>
> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> 1 file changed, 8 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 947e1accae3a..693ac533f9b6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> };
>
> mdss: mdss@ae00000 {
> - compatible = "qcom,sdm845-mdss";
> + compatible = "qcom,sm8250-mdss";
> reg = <0 0x0ae00000 0 0x1000>;
> reg-names = "mdss";
>
> - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> - interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> + interconnect-names = "mdp0-mem", "mdp1-mem";
>
> power-domains = <&dispcc MDSS_GDSC>;
>
> @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> ranges;
>
> mdss_mdp: mdp@ae01000 {
> - compatible = "qcom,sdm845-dpu";
> + compatible = "qcom,sm8250-dpu";
> reg = <0 0x0ae01000 0 0x8f000>,
> <0 0x0aeb0000 0 0x2008>;
> reg-names = "mdp", "vbif";
> @@ -2580,7 +2579,7 @@ opp-358000000 {
>
> dispcc: clock-controller@af00000 {
> compatible = "qcom,sm8250-dispcc";
> - reg = <0 0x0af00000 0 0x20000>;
> + reg = <0 0x0af00000 0 0x10000>;
> mmcx-supply = <&mmcx_reg>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&dsi0_phy 0>,
> @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> <&dsi1_phy 0>,
> <&dsi1_phy 1>,
> <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <&sleep_clk>;
> + <0>;
> clock-names = "bi_tcxo",
> "dsi0_phy_pll_out_byteclk",
> "dsi0_phy_pll_out_dsiclk",
> "dsi1_phy_pll_out_byteclk",
> "dsi1_phy_pll_out_dsiclk",
> - "dp_link_clk_divsel_ten",
> - "dp_vco_divided_clk_src_mux",
> - "dptx1_phy_pll_link_clk",
> - "dptx1_phy_pll_vco_div_clk",
> - "dptx2_phy_pll_link_clk",
> - "dptx2_phy_pll_vco_div_clk",
> - "edp_phy_pll_link_clk",
> - "edp_phy_pll_vco_div_clk",
> - "sleep_clk";
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> #clock-cells = <1>;
> #reset-cells = <1>;
> #power-domain-cells = <1>;
> --
> 2.26.1
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display
2021-02-15 16:26 ` [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display Jonathan Marek
@ 2021-03-05 21:46 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2021-03-05 21:46 UTC (permalink / raw)
To: Jonathan Marek
Cc: tongtiangen, Kalyan Thota, Rajendra Nayak, Tanmay Shah,
linux-arm-msm, open list, Qinglang Miao,
open list:DRM DRIVER FOR MSM ADRENO GPU, Drew Davenport,
Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list:DRM DRIVER FOR MSM ADRENO GPU, Sean Paul, David Airlie
On Mon, 15 Feb 2021 11:26:04 -0500, Jonathan Marek wrote:
> The driver already has support for sm8150/sm8250, but the compatibles were
> never added.
>
> Also inverse the non-mdp4 condition in add_display_components() to avoid
> having to check every new compatible in the condition.
>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> Documentation/devicetree/bindings/display/msm/dpu.txt | 4 ++--
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 2 ++
> drivers/gpu/drm/msm/msm_drv.c | 6 +++---
> 3 files changed, 7 insertions(+), 5 deletions(-)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes
2021-02-16 21:14 ` Dmitry Baryshkov
@ 2021-03-11 0:10 ` Bjorn Andersson
2021-03-12 21:44 ` Dmitry Baryshkov
0 siblings, 1 reply; 7+ messages in thread
From: Bjorn Andersson @ 2021-03-11 0:10 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: Jonathan Marek, open list:DRM DRIVER FOR MSM ADRENO GPU,
Andy Gross, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:
> Except for the compatible value changes:
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> May I suggest to split the compatibility name changes into a separate
> series from this patch (without it the patch stands a chance of being
> accepted into the stable tree, if I'm not mistaken).
>
Please let me know what I should do with this patch.
Regards,
Bjorn
> On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@marek.ca> wrote:
> >
> > Apply these fixes to the newly added sm8250 display ndoes
> > - Use sm8250 compatibles instead of sdm845 compatibles
> > - Remove "notused" interconnect (which apparently was blindly copied from
> > my old patches)
> > - Use dispcc node example from dt-bindings, removing clocks which aren't
> > documented or used by the driver and fixing the region size.
> >
> > Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > ---
> > arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> > 1 file changed, 8 insertions(+), 23 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index 947e1accae3a..693ac533f9b6 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> > };
> >
> > mdss: mdss@ae00000 {
> > - compatible = "qcom,sdm845-mdss";
> > + compatible = "qcom,sm8250-mdss";
> > reg = <0 0x0ae00000 0 0x1000>;
> > reg-names = "mdss";
> >
> > - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> > - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> > - interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> > + interconnect-names = "mdp0-mem", "mdp1-mem";
> >
> > power-domains = <&dispcc MDSS_GDSC>;
> >
> > @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> > ranges;
> >
> > mdss_mdp: mdp@ae01000 {
> > - compatible = "qcom,sdm845-dpu";
> > + compatible = "qcom,sm8250-dpu";
> > reg = <0 0x0ae01000 0 0x8f000>,
> > <0 0x0aeb0000 0 0x2008>;
> > reg-names = "mdp", "vbif";
> > @@ -2580,7 +2579,7 @@ opp-358000000 {
> >
> > dispcc: clock-controller@af00000 {
> > compatible = "qcom,sm8250-dispcc";
> > - reg = <0 0x0af00000 0 0x20000>;
> > + reg = <0 0x0af00000 0 0x10000>;
> > mmcx-supply = <&mmcx_reg>;
> > clocks = <&rpmhcc RPMH_CXO_CLK>,
> > <&dsi0_phy 0>,
> > @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> > <&dsi1_phy 0>,
> > <&dsi1_phy 1>,
> > <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <0>,
> > - <&sleep_clk>;
> > + <0>;
> > clock-names = "bi_tcxo",
> > "dsi0_phy_pll_out_byteclk",
> > "dsi0_phy_pll_out_dsiclk",
> > "dsi1_phy_pll_out_byteclk",
> > "dsi1_phy_pll_out_dsiclk",
> > - "dp_link_clk_divsel_ten",
> > - "dp_vco_divided_clk_src_mux",
> > - "dptx1_phy_pll_link_clk",
> > - "dptx1_phy_pll_vco_div_clk",
> > - "dptx2_phy_pll_link_clk",
> > - "dptx2_phy_pll_vco_div_clk",
> > - "edp_phy_pll_link_clk",
> > - "edp_phy_pll_vco_div_clk",
> > - "sleep_clk";
> > + "dp_phy_pll_link_clk",
> > + "dp_phy_pll_vco_div_clk";
> > #clock-cells = <1>;
> > #reset-cells = <1>;
> > #power-domain-cells = <1>;
> > --
> > 2.26.1
> >
>
>
> --
> With best wishes
> Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes
2021-03-11 0:10 ` Bjorn Andersson
@ 2021-03-12 21:44 ` Dmitry Baryshkov
0 siblings, 0 replies; 7+ messages in thread
From: Dmitry Baryshkov @ 2021-03-12 21:44 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Jonathan Marek, open list:DRM DRIVER FOR MSM ADRENO GPU,
Andy Gross, Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list
On Thu, 11 Mar 2021 at 03:10, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Tue 16 Feb 15:14 CST 2021, Dmitry Baryshkov wrote:
>
> > Except for the compatible value changes:
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >
> > May I suggest to split the compatibility name changes into a separate
> > series from this patch (without it the patch stands a chance of being
> > accepted into the stable tree, if I'm not mistaken).
> >
>
> Please let me know what I should do with this patch.
I suggested splitting the compatibility settings, so that the fixes
can go into the stable branch. I can carve that out, if Jonathan does
not object.
>
> Regards,
> Bjorn
>
> > On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@marek.ca> wrote:
> > >
> > > Apply these fixes to the newly added sm8250 display ndoes
> > > - Use sm8250 compatibles instead of sdm845 compatibles
> > > - Remove "notused" interconnect (which apparently was blindly copied from
> > > my old patches)
> > > - Use dispcc node example from dt-bindings, removing clocks which aren't
> > > documented or used by the driver and fixing the region size.
> > >
> > > Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> > > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > > ---
> > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> > > 1 file changed, 8 insertions(+), 23 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > index 947e1accae3a..693ac533f9b6 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> > > };
> > >
> > > mdss: mdss@ae00000 {
> > > - compatible = "qcom,sdm845-mdss";
> > > + compatible = "qcom,sm8250-mdss";
> > > reg = <0 0x0ae00000 0 0x1000>;
> > > reg-names = "mdss";
> > >
> > > - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> > > - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > > + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> > > <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> > > - interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> > > + interconnect-names = "mdp0-mem", "mdp1-mem";
> > >
> > > power-domains = <&dispcc MDSS_GDSC>;
> > >
> > > @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> > > ranges;
> > >
> > > mdss_mdp: mdp@ae01000 {
> > > - compatible = "qcom,sdm845-dpu";
> > > + compatible = "qcom,sm8250-dpu";
> > > reg = <0 0x0ae01000 0 0x8f000>,
> > > <0 0x0aeb0000 0 0x2008>;
> > > reg-names = "mdp", "vbif";
> > > @@ -2580,7 +2579,7 @@ opp-358000000 {
> > >
> > > dispcc: clock-controller@af00000 {
> > > compatible = "qcom,sm8250-dispcc";
> > > - reg = <0 0x0af00000 0 0x20000>;
> > > + reg = <0 0x0af00000 0 0x10000>;
> > > mmcx-supply = <&mmcx_reg>;
> > > clocks = <&rpmhcc RPMH_CXO_CLK>,
> > > <&dsi0_phy 0>,
> > > @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> > > <&dsi1_phy 0>,
> > > <&dsi1_phy 1>,
> > > <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <0>,
> > > - <&sleep_clk>;
> > > + <0>;
> > > clock-names = "bi_tcxo",
> > > "dsi0_phy_pll_out_byteclk",
> > > "dsi0_phy_pll_out_dsiclk",
> > > "dsi1_phy_pll_out_byteclk",
> > > "dsi1_phy_pll_out_dsiclk",
> > > - "dp_link_clk_divsel_ten",
> > > - "dp_vco_divided_clk_src_mux",
> > > - "dptx1_phy_pll_link_clk",
> > > - "dptx1_phy_pll_vco_div_clk",
> > > - "dptx2_phy_pll_link_clk",
> > > - "dptx2_phy_pll_vco_div_clk",
> > > - "edp_phy_pll_link_clk",
> > > - "edp_phy_pll_vco_div_clk",
> > > - "sleep_clk";
> > > + "dp_phy_pll_link_clk",
> > > + "dp_phy_pll_vco_div_clk";
> > > #clock-cells = <1>;
> > > #reset-cells = <1>;
> > > #power-domain-cells = <1>;
> > > --
> > > 2.26.1
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-03-12 21:45 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-15 16:26 [PATCH v3 0/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
2021-02-15 16:26 ` [PATCH v3 1/2] drm/msm: add compatibles for sm8150/sm8250 display Jonathan Marek
2021-03-05 21:46 ` Rob Herring
2021-02-15 16:26 ` [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes Jonathan Marek
2021-02-16 21:14 ` Dmitry Baryshkov
2021-03-11 0:10 ` Bjorn Andersson
2021-03-12 21:44 ` Dmitry Baryshkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).