[PATCH AUTOSEL 5.10 01/33] ARM: dts: am33xx: add aliases for mmc interfaces

[PATCH AUTOSEL 5.10 01/33] ARM: dts: am33xx: add aliases for mmc interfaces

[Sasha Levin]

From: Mans Rullgard <mans@mansr.com>

[ Upstream commit 9bbce32a20d6a72c767a7f85fd6127babd1410ac ]

Without DT aliases, the numbering of mmc interfaces is unpredictable.
Adding them makes it possible to refer to devices consistently.  The
popular suggestion to use UUIDs obviously doesn't work with a blank
device fresh from the factory.

See commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
device tree alias") for more discussion.

Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/am33xx.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 4c2298024137..f09a61cac2dc 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@ aliases {
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
-- 
2.30.1

[PATCH AUTOSEL 5.10 02/33] bus: ti-sysc: Fix warning on unbind if reset is not deasserted

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit a7b5d7c4969aba8d1f04c29048906abaa71fb6a9 ]

We currently get thefollowing on driver unbind if a reset is configured
and asserted:

WARNING: CPU: 0 PID: 993 at drivers/reset/core.c:432 reset_control_assert
...
(reset_control_assert) from [<c0fecda8>] (sysc_remove+0x190/0x1e4)
(sysc_remove) from [<c0a2bb58>] (platform_remove+0x24/0x3c)
(platform_remove) from [<c0a292fc>] (__device_release_driver+0x154/0x214)
(__device_release_driver) from [<c0a2a210>] (device_driver_detach+0x3c/0x8c)
(device_driver_detach) from [<c0a27d64>] (unbind_store+0x60/0xd4)
(unbind_store) from [<c0546bec>] (kernfs_fop_write_iter+0x10c/0x1cc)

Let's fix it by checking the reset status.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/ti-sysc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 45f5530666d3..16e389dce111 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -3044,7 +3044,9 @@ static int sysc_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	reset_control_assert(ddata->rsts);
+
+	if (!reset_control_status(ddata->rsts))
+		reset_control_assert(ddata->rsts);
 
 unprepare:
 	sysc_unprepare(ddata);
-- 
2.30.1

[PATCH AUTOSEL 5.10 03/33] platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2

[Sasha Levin]

From: Alban Bedel <albeu@free.fr>

[ Upstream commit 56678a5f44ef5f0ad9a67194bbee2280c6286534 ]

Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the
HEBC method, which prevent the power button from working. Add a quirk
to enable the button array on this system family and fix the power
button.

Signed-off-by: Alban Bedel <albeu@free.fr>
Tested-by: Alexander Kobel <a-kobel@a-kobel.de>
Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.fr
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel-hid.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 86261970bd8f..8a0cd5bf0065 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -86,6 +86,13 @@ static const struct dmi_system_id button_array_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
 		},
 	},
+	{
+		.ident = "Lenovo ThinkPad X1 Tablet Gen 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"),
+		},
+	},
 	{ }
 };
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 04/33] bpf, x86: Use kvmalloc_array instead kmalloc_array in bpf_jit_comp

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit de920fc64cbaa031f947e9be964bda05fd090380 ]

x86 bpf_jit_comp.c used kmalloc_array to store jited addresses
for each bpf insn. With a large bpf program, we have see the
following allocation failures in our production server:

    page allocation failure: order:5, mode:0x40cc0(GFP_KERNEL|__GFP_COMP),
                             nodemask=(null),cpuset=/,mems_allowed=0"
    Call Trace:
    dump_stack+0x50/0x70
    warn_alloc.cold.120+0x72/0xd2
    ? __alloc_pages_direct_compact+0x157/0x160
    __alloc_pages_slowpath+0xcdb/0xd00
    ? get_page_from_freelist+0xe44/0x1600
    ? vunmap_page_range+0x1ba/0x340
    __alloc_pages_nodemask+0x2c9/0x320
    kmalloc_order+0x18/0x80
    kmalloc_order_trace+0x1d/0xa0
    bpf_int_jit_compile+0x1e2/0x484
    ? kmalloc_order_trace+0x1d/0xa0
    bpf_prog_select_runtime+0xc3/0x150
    bpf_prog_load+0x480/0x720
    ? __mod_memcg_lruvec_state+0x21/0x100
    __do_sys_bpf+0xc31/0x2040
    ? close_pdeo+0x86/0xe0
    do_syscall_64+0x42/0x110
    entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f2f300f7fa9
    Code: Bad RIP value.

Dumped assembly:

    ffffffff810b6d70 <bpf_int_jit_compile>:
    ; {
    ffffffff810b6d70: e8 eb a5 b4 00        callq   0xffffffff81c01360 <__fentry__>
    ffffffff810b6d75: 41 57                 pushq   %r15
    ...
    ffffffff810b6f39: e9 72 fe ff ff        jmp     0xffffffff810b6db0 <bpf_int_jit_compile+0x40>
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f3e: 8b 45 0c              movl    12(%rbp), %eax
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f41: be c0 0c 00 00        movl    $3264, %esi
    ;       addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
    ffffffff810b6f46: 8d 78 01              leal    1(%rax), %edi
    ;       if (unlikely(check_mul_overflow(n, size, &bytes)))
    ffffffff810b6f49: 48 c1 e7 02           shlq    $2, %rdi
    ;       return __kmalloc(bytes, flags);
    ffffffff810b6f4d: e8 8e 0c 1d 00        callq   0xffffffff81287be0 <__kmalloc>
    ;       if (!addrs) {
    ffffffff810b6f52: 48 85 c0              testq   %rax, %rax

Change kmalloc_array() to kvmalloc_array() to avoid potential
allocation error for big bpf programs.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210309015647.3657852-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 796506dcfc42..49a506583e0c 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -2019,7 +2019,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		extra_pass = true;
 		goto skip_init_addrs;
 	}
-	addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
+	addrs = kvmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
 	if (!addrs) {
 		prog = orig_prog;
 		goto out_addrs;
@@ -2109,7 +2109,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		if (image)
 			bpf_prog_fill_jited_linfo(prog, addrs + 1);
 out_addrs:
-		kfree(addrs);
+		kvfree(addrs);
 		kfree(jit_data);
 		prog->aux->jit_data = NULL;
 	}
-- 
2.30.1

[PATCH AUTOSEL 5.10 05/33] net/mlx5e: Enforce minimum value check for ICOSQ size

[Sasha Levin]

From: Tariq Toukan <tariqt@nvidia.com>

[ Upstream commit 5115daa675ccf70497fe56e8916cf738d8212c10 ]

The ICOSQ size should not go below MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE.
Enforce this where it's missing.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 6394f9d8c685..508999fa0f65 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2326,8 +2326,9 @@ static u8 mlx5e_build_icosq_log_wq_sz(struct mlx5e_params *params,
 {
 	switch (params->rq_wq_type) {
 	case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
-		return order_base_2(MLX5E_UMR_WQEBBS) +
-			mlx5e_get_rq_log_wq_sz(rqp->rqc);
+		return max_t(u8, MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE,
+			     order_base_2(MLX5E_UMR_WQEBBS) +
+			     mlx5e_get_rq_log_wq_sz(rqp->rqc));
 	default: /* MLX5_WQ_TYPE_CYCLIC */
 		return MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE;
 	}
-- 
2.30.1

[PATCH AUTOSEL 5.10 06/33] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[Sasha Levin]

From: Pavel Andrianov <andrianov@ispras.ru>

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index d1e4d42e497d..3712e1786091 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1544,8 +1544,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 	clk_disable_unprepare(pep->clk);
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
-	unregister_netdev(dev);
 	cancel_work_sync(&pep->tx_timeout_task);
+	unregister_netdev(dev);
 	free_netdev(dev);
 	return 0;
 }
-- 
2.30.1

[PATCH AUTOSEL 5.10 07/33] kunit: tool: Fix a python tuple typing error

[Sasha Levin]

From: David Gow <davidgow@google.com>

[ Upstream commit 7421b1a4d10c633ca5f14c8236d3e2c1de07e52b ]

The first argument to namedtuple() should match the name of the type,
which wasn't the case for KconfigEntryBase.

Fixing this is enough to make mypy show no python typing errors again.

Fixes 97752c39bd ("kunit: kunit_tool: Allow .kunitconfig to disable config items")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/kunit/kunit_config.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/kunit/kunit_config.py b/tools/testing/kunit/kunit_config.py
index 02ffc3a3e5dc..b30e9d6db6b4 100644
--- a/tools/testing/kunit/kunit_config.py
+++ b/tools/testing/kunit/kunit_config.py
@@ -12,7 +12,7 @@ import re
 CONFIG_IS_NOT_SET_PATTERN = r'^# CONFIG_(\w+) is not set$'
 CONFIG_PATTERN = r'^CONFIG_(\w+)=(\S+|".*")$'
 
-KconfigEntryBase = collections.namedtuple('KconfigEntry', ['name', 'value'])
+KconfigEntryBase = collections.namedtuple('KconfigEntryBase', ['name', 'value'])
 
 class KconfigEntry(KconfigEntryBase):
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 08/33] mISDN: fix crash in fritzpci

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index ec475087fbf9..39f841b42488 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -694,7 +694,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);
-- 
2.30.1

[PATCH AUTOSEL 5.10 09/33] net: correct sk_acceptq_is_full()

[Sasha Levin]

From: liuyacan <yacanliu@163.com>

[ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]

The "backlog" argument in listen() specifies
the maximom length of pending connections,
so the accept queue should be considered full
if there are exactly "backlog" elements.

Signed-off-by: liuyacan <yacanliu@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sock.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/net/sock.h b/include/net/sock.h
index 253202dcc5e6..8cdc009d7636 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -930,7 +930,7 @@ static inline void sk_acceptq_added(struct sock *sk)
 
 static inline bool sk_acceptq_is_full(const struct sock *sk)
 {
-	return READ_ONCE(sk->sk_ack_backlog) > READ_ONCE(sk->sk_max_ack_backlog);
+	return READ_ONCE(sk->sk_ack_backlog) >= READ_ONCE(sk->sk_max_ack_backlog);
 }
 
 /*
-- 
2.30.1

Re: [PATCH AUTOSEL 5.10 09/33] net: correct sk_acceptq_is_full()

[Marcelo Ricardo Leitner]

On Mon, Mar 29, 2021 at 06:21:57PM -0400, Sasha Levin wrote:
> From: liuyacan <yacanliu@163.com>
> 
> [ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]
> 
> The "backlog" argument in listen() specifies
> the maximom length of pending connections,
> so the accept queue should be considered full
> if there are exactly "backlog" elements.

Hi Sasha. Can you please confirm that this one was dropped as well?
Thanks.

Re: [PATCH AUTOSEL 5.10 09/33] net: correct sk_acceptq_is_full()

[Sasha Levin]

On Mon, Apr 05, 2021 at 03:59:02PM -0300, Marcelo Ricardo Leitner wrote:
>On Mon, Mar 29, 2021 at 06:21:57PM -0400, Sasha Levin wrote:
>> From: liuyacan <yacanliu@163.com>
>>
>> [ Upstream commit f211ac154577ec9ccf07c15f18a6abf0d9bdb4ab ]
>>
>> The "backlog" argument in listen() specifies
>> the maximom length of pending connections,
>> so the accept queue should be considered full
>> if there are exactly "backlog" elements.
>
>Hi Sasha. Can you please confirm that this one was dropped as well?
>Thanks.

Yup!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.10 10/33] mac80211: fix double free in ibss_leave

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]

Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ibss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1f552f374e97..a7ac53a2f00d 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1874,6 +1874,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
 
 	/* remove beacon */
 	kfree(sdata->u.ibss.ie);
+	sdata->u.ibss.ie = NULL;
+	sdata->u.ibss.ie_len = 0;
 
 	/* on the next join, re-program HT parameters */
 	memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));
-- 
2.30.1

[PATCH AUTOSEL 5.10 11/33] mac80211: Check crypto_aead_encrypt for errors

[Sasha Levin]

From: Daniel Phan <daniel.phan36@gmail.com>

[ Upstream commit 58d25626f6f0ea5bcec3c13387b9f835d188723d ]

crypto_aead_encrypt returns <0 on error, so if these calls are not checked,
execution may continue with failed encrypts.  It also seems that these two
crypto_aead_encrypt calls are the only instances in the codebase that are
not checked for errors.

Signed-off-by: Daniel Phan <daniel.phan36@gmail.com>
Link: https://lore.kernel.org/r/20210309204137.823268-1-daniel.phan36@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/aead_api.c | 5 +++--
 net/mac80211/aes_gmac.c | 5 +++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/aead_api.c b/net/mac80211/aead_api.c
index d7b3d905d535..b00d6f5b33f4 100644
--- a/net/mac80211/aead_api.c
+++ b/net/mac80211/aead_api.c
@@ -23,6 +23,7 @@ int aead_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
 	struct aead_request *aead_req;
 	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 	u8 *__aad;
+	int ret;
 
 	aead_req = kzalloc(reqsize + aad_len, GFP_ATOMIC);
 	if (!aead_req)
@@ -40,10 +41,10 @@ int aead_encrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
 	aead_request_set_crypt(aead_req, sg, sg, data_len, b_0);
 	aead_request_set_ad(aead_req, sg[0].length);
 
-	crypto_aead_encrypt(aead_req);
+	ret = crypto_aead_encrypt(aead_req);
 	kfree_sensitive(aead_req);
 
-	return 0;
+	return ret;
 }
 
 int aead_decrypt(struct crypto_aead *tfm, u8 *b_0, u8 *aad, size_t aad_len,
diff --git a/net/mac80211/aes_gmac.c b/net/mac80211/aes_gmac.c
index 6f3b3a0cc10a..512cab073f2e 100644
--- a/net/mac80211/aes_gmac.c
+++ b/net/mac80211/aes_gmac.c
@@ -22,6 +22,7 @@ int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
 	struct aead_request *aead_req;
 	int reqsize = sizeof(*aead_req) + crypto_aead_reqsize(tfm);
 	const __le16 *fc;
+	int ret;
 
 	if (data_len < GMAC_MIC_LEN)
 		return -EINVAL;
@@ -59,10 +60,10 @@ int ieee80211_aes_gmac(struct crypto_aead *tfm, const u8 *aad, u8 *nonce,
 	aead_request_set_crypt(aead_req, sg, sg, 0, iv);
 	aead_request_set_ad(aead_req, GMAC_AAD_LEN + data_len);
 
-	crypto_aead_encrypt(aead_req);
+	ret = crypto_aead_encrypt(aead_req);
 	kfree_sensitive(aead_req);
 
-	return 0;
+	return ret;
 }
 
 struct crypto_aead *ieee80211_aes_gmac_key_setup(const u8 key[],
-- 
2.30.1

[PATCH AUTOSEL 5.10 12/33] mac80211: choose first enabled channel for monitor

[Sasha Levin]

From: Karthikeyan Kathirvel <kathirve@codeaurora.org>

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 523380aed92e..19c093bb3876 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -982,8 +982,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 			continue;
 
 		if (!dflt_chandef.chan) {
+			/*
+			 * Assign the first enabled channel to dflt_chandef
+			 * from the list of channels
+			 */
+			for (i = 0; i < sband->n_channels; i++)
+				if (!(sband->channels[i].flags &
+						IEEE80211_CHAN_DISABLED))
+					break;
+			/* if none found then use the first anyway */
+			if (i == sband->n_channels)
+				i = 0;
 			cfg80211_chandef_create(&dflt_chandef,
-						&sband->channels[0],
+						&sband->channels[i],
 						NL80211_CHAN_NO_HT);
 			/* init channel we're on */
 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
-- 
2.30.1

[PATCH AUTOSEL 5.10 13/33] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate

[Sasha Levin]

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 9daaf31307856defb1070685418ce5a484ecda3a ]

The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value
directly, but the same value was also being specified in the
dsi_pll_regs struct pll_lockdet_rate variable: let's use it!

Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for
pll_lockdet_rate")

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
index 93bf142e4a4e..901e8b8819d3 100644
--- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c
@@ -325,7 +325,7 @@ static void dsi_pll_commit(struct dsi_pll_7nm *pll)
 	pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low);
 	pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid);
 	pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high);
-	pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40);
+	pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate);
 	pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06);
 	pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */
 	pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters);
-- 
2.30.1

[PATCH AUTOSEL 5.10 14/33] drm/msm/adreno: a5xx_power: Don't apply A540 lm_setup to other GPUs

[Sasha Levin]

From: Konrad Dybcio <konrad.dybcio@somainline.org>

[ Upstream commit 4a9d36b0610aa7034340e976652e5b43320dd7c5 ]

While passing the A530-specific lm_setup func to A530 and A540
to !A530 was fine back when only these two were supported, it
certainly is not a good idea to send A540 specifics to smaller
GPUs like A508 and friends.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_power.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_power.c b/drivers/gpu/drm/msm/adreno/a5xx_power.c
index f176a6f3eff6..e58670a61df4 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_power.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_power.c
@@ -304,7 +304,7 @@ int a5xx_power_init(struct msm_gpu *gpu)
 	/* Set up the limits management */
 	if (adreno_is_a530(adreno_gpu))
 		a530_lm_setup(gpu);
-	else
+	else if (adreno_is_a540(adreno_gpu))
 		a540_lm_setup(gpu);
 
 	/* Set up SP/TP power collpase */
-- 
2.30.1

[PATCH AUTOSEL 5.10 15/33] drm/msm: Ratelimit invalid-fence message

[Sasha Levin]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ]

We have seen a couple cases where low memory situations cause something
bad to happen, followed by a flood of these messages obscuring the root
cause.  Lets ratelimit the dmesg spam so that next time it happens we
don't lose the kernel traces leading up to this.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_fence.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c
index ad2703698b05..cd59a5918038 100644
--- a/drivers/gpu/drm/msm/msm_fence.c
+++ b/drivers/gpu/drm/msm/msm_fence.c
@@ -45,7 +45,7 @@ int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
 	int ret;
 
 	if (fence > fctx->last_fence) {
-		DRM_ERROR("%s: waiting on invalid fence: %u (of %u)\n",
+		DRM_ERROR_RATELIMITED("%s: waiting on invalid fence: %u (of %u)\n",
 				fctx->name, fence, fctx->last_fence);
 		return -EINVAL;
 	}
-- 
2.30.1

[PATCH AUTOSEL 5.10 16/33] netfilter: conntrack: Fix gre tunneling over ipv6

[Sasha Levin]

From: Ludovic Senecaux <linuxludo@free.fr>

[ Upstream commit 8b2030b4305951f44afef80225f1475618e25a73 ]

This fix permits gre connections to be tracked within ip6tables rules

Signed-off-by: Ludovic Senecaux <linuxludo@free.fr>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_gre.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 5b05487a60d2..db11e403d818 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -218,9 +218,6 @@ int nf_conntrack_gre_packet(struct nf_conn *ct,
 			    enum ip_conntrack_info ctinfo,
 			    const struct nf_hook_state *state)
 {
-	if (state->pf != NFPROTO_IPV4)
-		return -NF_ACCEPT;
-
 	if (!nf_ct_is_confirmed(ct)) {
 		unsigned int *timeouts = nf_ct_timeout_lookup(ct);
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 17/33] netfilter: nftables: skip hook overlap logic if flowtable is stale

[Sasha Levin]

From: Pablo Neira Ayuso <pablo@netfilter.org>

[ Upstream commit 86fe2c19eec4728fd9a42ba18f3b47f0d5f9fd7c ]

If the flowtable has been previously removed in this batch, skip the
hook overlap checks. This fixes spurious EEXIST errors when removing and
adding the flowtable in the same batch.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 8739ef135156..8b474559f1be 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -6573,6 +6573,9 @@ static int nft_register_flowtable_net_hooks(struct net *net,
 
 	list_for_each_entry(hook, hook_list, list) {
 		list_for_each_entry(ft, &table->flowtables, list) {
+			if (!nft_is_active_next(net, ft))
+				continue;
+
 			list_for_each_entry(hook2, &ft->hook_list, list) {
 				if (hook->ops.dev == hook2->ops.dev &&
 				    hook->ops.pf == hook2->ops.pf) {
-- 
2.30.1

[PATCH AUTOSEL 5.10 18/33] net: ipa: fix init header command validation

[Sasha Levin]

From: Alex Elder <elder@linaro.org>

[ Upstream commit b4afd4b90a7cfe54c7cd9db49e3c36d552325eac ]

We use ipa_cmd_header_valid() to ensure certain values we will
program into hardware are within range, well in advance of when we
actually program them.  This way we avoid having to check for errors
when we actually program the hardware.

Unfortunately the dev_err() call for a bad offset value does not
supply the arguments to match the format specifiers properly.
Fix this.

There was also supposed to be a check to ensure the size to be
programmed fits in the field that holds it.  Add this missing check.

Rearrange the way we ensure the header table fits in overall IPA
memory range.

Finally, update ipa_cmd_table_valid() so the format of messages
printed for errors matches what's done in ipa_cmd_header_valid().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ipa/ipa_cmd.c | 50 ++++++++++++++++++++++++++-------------
 1 file changed, 33 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ipa/ipa_cmd.c b/drivers/net/ipa/ipa_cmd.c
index d92dd3f09b73..b59d1948114a 100644
--- a/drivers/net/ipa/ipa_cmd.c
+++ b/drivers/net/ipa/ipa_cmd.c
@@ -175,21 +175,23 @@ bool ipa_cmd_table_valid(struct ipa *ipa, const struct ipa_mem *mem,
 			    : field_max(IP_FLTRT_FLAGS_NHASH_ADDR_FMASK);
 	if (mem->offset > offset_max ||
 	    ipa->mem_offset > offset_max - mem->offset) {
-		dev_err(dev, "IPv%c %s%s table region offset too large "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipv6 ? '6' : '4', hashed ? "hashed " : "",
-			      route ? "route" : "filter",
-			      ipa->mem_offset, mem->offset, offset_max);
+		dev_err(dev, "IPv%c %s%s table region offset too large\n",
+			ipv6 ? '6' : '4', hashed ? "hashed " : "",
+			route ? "route" : "filter");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			ipa->mem_offset, mem->offset, offset_max);
+
 		return false;
 	}
 
 	if (mem->offset > ipa->mem_size ||
 	    mem->size > ipa->mem_size - mem->offset) {
-		dev_err(dev, "IPv%c %s%s table region out of range "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipv6 ? '6' : '4', hashed ? "hashed " : "",
-			      route ? "route" : "filter",
-			      mem->offset, mem->size, ipa->mem_size);
+		dev_err(dev, "IPv%c %s%s table region out of range\n",
+			ipv6 ? '6' : '4', hashed ? "hashed " : "",
+			route ? "route" : "filter");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			mem->offset, mem->size, ipa->mem_size);
+
 		return false;
 	}
 
@@ -205,22 +207,36 @@ static bool ipa_cmd_header_valid(struct ipa *ipa)
 	u32 size_max;
 	u32 size;
 
+	/* In ipa_cmd_hdr_init_local_add() we record the offset and size
+	 * of the header table memory area.  Make sure the offset and size
+	 * fit in the fields that need to hold them, and that the entire
+	 * range is within the overall IPA memory range.
+	 */
 	offset_max = field_max(HDR_INIT_LOCAL_FLAGS_HDR_ADDR_FMASK);
 	if (mem->offset > offset_max ||
 	    ipa->mem_offset > offset_max - mem->offset) {
-		dev_err(dev, "header table region offset too large "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      ipa->mem_offset + mem->offset, offset_max);
+		dev_err(dev, "header table region offset too large\n");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			ipa->mem_offset, mem->offset, offset_max);
+
 		return false;
 	}
 
 	size_max = field_max(HDR_INIT_LOCAL_FLAGS_TABLE_SIZE_FMASK);
 	size = ipa->mem[IPA_MEM_MODEM_HEADER].size;
 	size += ipa->mem[IPA_MEM_AP_HEADER].size;
-	if (mem->offset > ipa->mem_size || size > ipa->mem_size - mem->offset) {
-		dev_err(dev, "header table region out of range "
-			      "(0x%04x + 0x%04x > 0x%04x)\n",
-			      mem->offset, size, ipa->mem_size);
+
+	if (size > size_max) {
+		dev_err(dev, "header table region size too large\n");
+		dev_err(dev, "    (0x%04x > 0x%08x)\n", size, size_max);
+
+		return false;
+	}
+	if (size > ipa->mem_size || mem->offset > ipa->mem_size - size) {
+		dev_err(dev, "header table region out of range\n");
+		dev_err(dev, "    (0x%04x + 0x%04x > 0x%04x)\n",
+			mem->offset, size, ipa->mem_size);
+
 		return false;
 	}
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 19/33] platform/x86: thinkpad_acpi: Allow the FnLock LED to change state

[Sasha Levin]

From: Esteve Varela Colominas <esteve.varela@gmail.com>

[ Upstream commit 3d677f12ea3a2097a16ded570623567403dea959 ]

On many recent ThinkPad laptops, there's a new LED next to the ESC key,
that indicates the FnLock status.
When the Fn+ESC combo is pressed, FnLock is toggled, which causes the
Media Key functionality to change, making it so that the media keys
either perform their media key function, or function as an F-key by
default. The Fn key can be used the access the alternate function at any
time.

With the current linux kernel, the LED doens't change state if you press
the Fn+ESC key combo. However, the media key functionality *does*
change. This is annoying, since the LED will stay on if it was on during
bootup, and it makes it hard to keep track what the current state of the
FnLock is.

This patch calls an ACPI function, that gets the current media key
state, when the Fn+ESC key combo is pressed. Through testing it was
discovered that this function causes the LED to update correctly to
reflect the current state when this function is called.

The relevant ACPI calls are the following:
\_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled.
\_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it.

Relevant discussion:
https://bugzilla.kernel.org/show_bug.cgi?id=207841
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015

Signed-off-by: Esteve Varela Colominas <esteve.varela@gmail.com>
Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 69402758b99c..3b0acaeb20cf 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4079,13 +4079,19 @@ static bool hotkey_notify_6xxx(const u32 hkey,
 
 	case TP_HKEY_EV_KEY_NUMLOCK:
 	case TP_HKEY_EV_KEY_FN:
-	case TP_HKEY_EV_KEY_FN_ESC:
 		/* key press events, we just ignore them as long as the EC
 		 * is still reporting them in the normal keyboard stream */
 		*send_acpi_ev = false;
 		*ignore_acpi_ev = true;
 		return true;
 
+	case TP_HKEY_EV_KEY_FN_ESC:
+		/* Get the media key status to foce the status LED to update */
+		acpi_evalf(hkey_handle, NULL, "GMKS", "v");
+		*send_acpi_ev = false;
+		*ignore_acpi_ev = true;
+		return true;
+
 	case TP_HKEY_EV_TABLET_CHANGED:
 		tpacpi_input_send_tabletsw();
 		hotkey_tablet_mode_notify_change();
-- 
2.30.1

[PATCH AUTOSEL 5.10 20/33] kselftest/arm64: sve: Do not use non-canonical FFR register value

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 7011d72588d16a9e5f5d85acbc8b10019809599c ]

The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.

The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
 # ./sve-test
Vector length:  128 bits
PID:    207
Mismatch: PID=207, iteration=0, reg=48
        Expected [cf00]
        Got      [0f00]
Aborted
-----------

Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.

This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/arm64/fp/sve-test.S | 22 ++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/tools/testing/selftests/arm64/fp/sve-test.S b/tools/testing/selftests/arm64/fp/sve-test.S
index f95074c9b48b..07f14e279a90 100644
--- a/tools/testing/selftests/arm64/fp/sve-test.S
+++ b/tools/testing/selftests/arm64/fp/sve-test.S
@@ -284,16 +284,28 @@ endfunction
 // Set up test pattern in the FFR
 // x0: pid
 // x2: generation
+//
+// We need to generate a canonical FFR value, which consists of a number of
+// low "1" bits, followed by a number of zeros. This gives us 17 unique values
+// per 16 bits of FFR, so we create a 4 bit signature out of the PID and
+// generation, and use that as the initial number of ones in the pattern.
+// We fill the upper lanes of FFR with zeros.
 // Beware: corrupts P0.
 function setup_ffr
 	mov	x4, x30
 
-	bl	pattern
+	and	w0, w0, #0x3
+	bfi	w0, w2, #2, #2
+	mov	w1, #1
+	lsl	w1, w1, w0
+	sub	w1, w1, #1
+
 	ldr	x0, =ffrref
-	ldr	x1, =scratch
-	rdvl	x2, #1
-	lsr	x2, x2, #3
-	bl	memcpy
+	strh	w1, [x0], 2
+	rdvl	x1, #1
+	lsr	x1, x1, #3
+	sub	x1, x1, #2
+	bl	memclr
 
 	mov	x0, #0
 	ldr	x1, =ffrref
-- 
2.30.1

[PATCH AUTOSEL 5.10 21/33] drm/msm/disp/dpu1: icc path needs to be set before dpu runtime resume

[Sasha Levin]

From: Kalyan Thota <kalyant@codeaurora.org>

[ Upstream commit 627dc55c273dab308303a5217bd3e767d7083ddb ]

DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.

The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.

Signed-off-by: Kalyan Thota <kalyan_t@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index d93c44f6996d..e69ea810e18d 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -43,6 +43,8 @@
 #define DPU_DEBUGFS_DIR "msm_dpu"
 #define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
 
+#define MIN_IB_BW	400000000ULL /* Min ib vote 400MB */
+
 static int dpu_kms_hw_init(struct msm_kms *kms);
 static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
 
@@ -929,6 +931,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 		DPU_DEBUG("REG_DMA is not defined");
 	}
 
+	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
+		dpu_kms_parse_data_bus_icc_path(dpu_kms);
+
 	pm_runtime_get_sync(&dpu_kms->pdev->dev);
 
 	dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0);
@@ -1030,9 +1035,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
 
 	dpu_vbif_init_memtypes(dpu_kms);
 
-	if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
-		dpu_kms_parse_data_bus_icc_path(dpu_kms);
-
 	pm_runtime_put_sync(&dpu_kms->pdev->dev);
 
 	return 0;
@@ -1189,10 +1191,10 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
 
 	ddev = dpu_kms->dev;
 
+	WARN_ON(!(dpu_kms->num_paths));
 	/* Min vote of BW is required before turning on AXI clk */
 	for (i = 0; i < dpu_kms->num_paths; i++)
-		icc_set_bw(dpu_kms->path[i], 0,
-			dpu_kms->catalog->perf.min_dram_ib);
+		icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
 
 	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
 	if (rc) {
-- 
2.30.1

[PATCH AUTOSEL 5.10 22/33] x86/build: Turn off -fcf-protection for realmode targets

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]

The new Ubuntu GCC packages turn on -fcf-protection globally,
which causes a build failure in the x86 realmode code:

  cc1: error: ‘-fcf-protection’ is not compatible with this target

Turn it off explicitly on compilers that understand this option.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 0a6d497221e4..9c86f2dc16b1 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -34,7 +34,7 @@ M16_CFLAGS	 := $(call cc-option, -m16, $(CODE16GCC_CFLAGS))
 REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \
 		   -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \
 		   -fno-strict-aliasing -fomit-frame-pointer -fno-pic \
-		   -mno-mmx -mno-sse
+		   -mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)
 
 REALMODE_CFLAGS += -ffreestanding
 REALMODE_CFLAGS += -fno-stack-protector
-- 
2.30.1

[PATCH AUTOSEL 5.10 23/33] block: clear GD_NEED_PART_SCAN later in bdev_disk_changed

[Sasha Levin]

From: Chris Chiu <chris.chiu@canonical.com>

[ Upstream commit 5116784039f0421e9a619023cfba3e302c3d9adc ]

The GD_NEED_PART_SCAN is set by bdev_check_media_change to initiate
a partition scan while removing a block device. It should be cleared
after blk_drop_paritions because blk_drop_paritions could return
-EBUSY and then the consequence __blkdev_get has no chance to do
delete_partition if GD_NEED_PART_SCAN already cleared.

It causes some problems on some card readers. Ex. Realtek card
reader 0bda:0328 and 0bda:0158. The device node of the partition
will not disappear after the memory card removed. Thus the user
applications can not update the device mapping correctly.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1920874
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323085219.24428-1-chris.chiu@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/block_dev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/block_dev.c b/fs/block_dev.c
index fe201b757baa..6516051807b8 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1404,13 +1404,13 @@ int bdev_disk_changed(struct block_device *bdev, bool invalidate)
 
 	lockdep_assert_held(&bdev->bd_mutex);
 
-	clear_bit(GD_NEED_PART_SCAN, &bdev->bd_disk->state);
-
 rescan:
 	ret = blk_drop_partitions(bdev);
 	if (ret)
 		return ret;
 
+	clear_bit(GD_NEED_PART_SCAN, &disk->state);
+
 	/*
 	 * Historically we only set the capacity to zero for devices that
 	 * support partitions (independ of actually having partitions created).
-- 
2.30.1

[PATCH AUTOSEL 5.10 24/33] platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms

[Sasha Levin]

From: "David E. Box" <david.e.box@linux.intel.com>

[ Upstream commit d1635448f1105e549b4041aab930dbc6945fc635 ]

Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle.  Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.

Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/intel_pmc_core.c | 50 +++++++++++++++++++--------
 1 file changed, 35 insertions(+), 15 deletions(-)

diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index 3e5fe66333f1..e06b36e87a33 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -863,34 +863,45 @@ static int pmc_core_pll_show(struct seq_file *s, void *unused)
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
 
-static ssize_t pmc_core_ltr_ignore_write(struct file *file,
-					 const char __user *userbuf,
-					 size_t count, loff_t *ppos)
+static int pmc_core_send_ltr_ignore(u32 value)
 {
 	struct pmc_dev *pmcdev = &pmc;
 	const struct pmc_reg_map *map = pmcdev->map;
-	u32 val, buf_size, fd;
-	int err;
-
-	buf_size = count < 64 ? count : 64;
-
-	err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
-	if (err)
-		return err;
+	u32 reg;
+	int err = 0;
 
 	mutex_lock(&pmcdev->lock);
 
-	if (val > map->ltr_ignore_max) {
+	if (value > map->ltr_ignore_max) {
 		err = -EINVAL;
 		goto out_unlock;
 	}
 
-	fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
-	fd |= (1U << val);
-	pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd);
+	reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
+	reg |= BIT(value);
+	pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg);
 
 out_unlock:
 	mutex_unlock(&pmcdev->lock);
+
+	return err;
+}
+
+static ssize_t pmc_core_ltr_ignore_write(struct file *file,
+					 const char __user *userbuf,
+					 size_t count, loff_t *ppos)
+{
+	u32 buf_size, value;
+	int err;
+
+	buf_size = min_t(u32, count, 64);
+
+	err = kstrtou32_from_user(userbuf, buf_size, 10, &value);
+	if (err)
+		return err;
+
+	err = pmc_core_send_ltr_ignore(value);
+
 	return err == 0 ? count : err;
 }
 
@@ -1244,6 +1255,15 @@ static int pmc_core_probe(struct platform_device *pdev)
 	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
 	dmi_check_system(pmc_core_dmi_table);
 
+	/*
+	 * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
+	 * a cable is attached. Tell the PMC to ignore it.
+	 */
+	if (pmcdev->map == &tgl_reg_map) {
+		dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
+		pmc_core_send_ltr_ignore(3);
+	}
+
 	pmc_core_dbgfs_register(pmcdev);
 
 	device_initialized = true;
-- 
2.30.1

[PATCH AUTOSEL 5.10 25/33] ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation

[Sasha Levin]

From: Yangbo Lu <yangbo.lu@nxp.com>

[ Upstream commit f51d7bf1dbe5522c51c93fe8faa5f4abbdf339cd ]

Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.

adj *= scaled_ppm;

This patch is to resolve it by using mul_u64_u64_div_u64().

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ptp/ptp_qoriq.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/ptp/ptp_qoriq.c b/drivers/ptp/ptp_qoriq.c
index beb5f74944cd..08f4cf0ad9e3 100644
--- a/drivers/ptp/ptp_qoriq.c
+++ b/drivers/ptp/ptp_qoriq.c
@@ -189,15 +189,16 @@ int ptp_qoriq_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
 	tmr_add = ptp_qoriq->tmr_add;
 	adj = tmr_add;
 
-	/* calculate diff as adj*(scaled_ppm/65536)/1000000
-	 * and round() to the nearest integer
+	/*
+	 * Calculate diff and round() to the nearest integer
+	 *
+	 * diff = adj * (ppb / 1000000000)
+	 *      = adj * scaled_ppm / 65536000000
 	 */
-	adj *= scaled_ppm;
-	diff = div_u64(adj, 8000000);
-	diff = (diff >> 13) + ((diff >> 12) & 1);
+	diff = mul_u64_u64_div_u64(adj, scaled_ppm, 32768000000);
+	diff = DIV64_U64_ROUND_UP(diff, 2);
 
 	tmr_add = neg_adj ? tmr_add - diff : tmr_add + diff;
-
 	ptp_qoriq->write(&regs->ctrl_regs->tmr_add, tmr_add);
 
 	return 0;
-- 
2.30.1

[PATCH AUTOSEL 5.10 26/33] scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

[Sasha Levin]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ]

If pscsi_map_sg() fails, make sure to drop references to already allocated
bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pscsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index 4e37fa9b409d..723a51a3f431 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -939,6 +939,14 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 
 	return 0;
 fail:
+	if (bio)
+		bio_put(bio);
+	while (req->bio) {
+		bio = req->bio;
+		req->bio = bio->bi_next;
+		bio_put(bio);
+	}
+	req->biotail = NULL;
 	return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 }
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 27/33] selftests/vm: fix out-of-tree build

[Sasha Levin]

From: Rong Chen <rong.a.chen@intel.com>

[ Upstream commit 19ec368cbc7ee1915e78c120b7a49c7f14734192 ]

When building out-of-tree, attempting to make target from $(OUTPUT) directory:

  make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.

Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/vm/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index e63f31632708..2cf32e6b376e 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -99,7 +99,7 @@ endef
 ifeq ($(CAN_BUILD_I386),1)
 $(BINARIES_32): CFLAGS += -m32
 $(BINARIES_32): LDLIBS += -lrt -ldl -lm
-$(BINARIES_32): %_32: %.c
+$(BINARIES_32): $(OUTPUT)/%_32: %.c
 	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@
 $(foreach t,$(TARGETS),$(eval $(call gen-target-rule-32,$(t))))
 endif
@@ -107,7 +107,7 @@ endif
 ifeq ($(CAN_BUILD_X86_64),1)
 $(BINARIES_64): CFLAGS += -m64
 $(BINARIES_64): LDLIBS += -lrt -ldl
-$(BINARIES_64): %_64: %.c
+$(BINARIES_64): $(OUTPUT)/%_64: %.c
 	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(notdir $^) $(LDLIBS) -o $@
 $(foreach t,$(TARGETS),$(eval $(call gen-target-rule-64,$(t))))
 endif
-- 
2.30.1

[PATCH AUTOSEL 5.10 28/33] ia64: mca: allocate early mca with GFP_ATOMIC

[Sasha Levin]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/mca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 2703f7795672..bd0a51dc345a 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1822,7 +1822,7 @@ ia64_mca_cpu_init(void *cpu_data)
 			data = mca_bootmem();
 			first_time = 0;
 		} else
-			data = (void *)__get_free_pages(GFP_KERNEL,
+			data = (void *)__get_free_pages(GFP_ATOMIC,
 							get_order(sz));
 		if (!data)
 			panic("Could not allocate MCA memory for cpu %d\n",
-- 
2.30.1

[PATCH AUTOSEL 5.10 29/33] ia64: fix format strings for err_inject

[Sasha Levin]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit 95d44a470a6814207d52dd6312203b0f4ef12710 ]

Fix warning with %lx / u64 mismatch:

  arch/ia64/kernel/err_inject.c: In function 'show_resources':
  arch/ia64/kernel/err_inject.c:62:22: warning:
    format '%lx' expects argument of type 'long unsigned int',
    but argument 3 has type 'u64' {aka 'long long unsigned int'}
     62 |  return sprintf(buf, "%lx", name[cpu]);   \
        |                      ^~~~~~~

Link: https://lkml.kernel.org/r/20210313104312.1548232-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/err_inject.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index 8b5b8e6bc9d9..dd5bfed52031 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -59,7 +59,7 @@ show_##name(struct device *dev, struct device_attribute *attr,	\
 		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
-	return sprintf(buf, "%lx\n", name[cpu]);			\
+	return sprintf(buf, "%llx\n", name[cpu]);			\
 }
 
 #define store(name)							\
@@ -86,9 +86,9 @@ store_call_start(struct device *dev, struct device_attribute *attr,
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_DEBUG "pal_mc_err_inject for cpu%d:\n", cpu);
-	printk(KERN_DEBUG "err_type_info=%lx,\n", err_type_info[cpu]);
-	printk(KERN_DEBUG "err_struct_info=%lx,\n", err_struct_info[cpu]);
-	printk(KERN_DEBUG "err_data_buffer=%lx, %lx, %lx.\n",
+	printk(KERN_DEBUG "err_type_info=%llx,\n", err_type_info[cpu]);
+	printk(KERN_DEBUG "err_struct_info=%llx,\n", err_struct_info[cpu]);
+	printk(KERN_DEBUG "err_data_buffer=%llx, %llx, %llx.\n",
 			  err_data_buffer[cpu].data1,
 			  err_data_buffer[cpu].data2,
 			  err_data_buffer[cpu].data3);
@@ -117,8 +117,8 @@ store_call_start(struct device *dev, struct device_attribute *attr,
 
 #ifdef ERR_INJ_DEBUG
 	printk(KERN_DEBUG "Returns: status=%d,\n", (int)status[cpu]);
-	printk(KERN_DEBUG "capabilities=%lx,\n", capabilities[cpu]);
-	printk(KERN_DEBUG "resources=%lx\n", resources[cpu]);
+	printk(KERN_DEBUG "capabilities=%llx,\n", capabilities[cpu]);
+	printk(KERN_DEBUG "resources=%llx\n", resources[cpu]);
 #endif
 	return size;
 }
@@ -131,7 +131,7 @@ show_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 			char *buf)
 {
 	unsigned int cpu=dev->id;
-	return sprintf(buf, "%lx\n", phys_addr[cpu]);
+	return sprintf(buf, "%llx\n", phys_addr[cpu]);
 }
 
 static ssize_t
@@ -145,7 +145,7 @@ store_virtual_to_phys(struct device *dev, struct device_attribute *attr,
 	ret = get_user_pages_fast(virt_addr, 1, FOLL_WRITE, NULL);
 	if (ret<=0) {
 #ifdef ERR_INJ_DEBUG
-		printk("Virtual address %lx is not existing.\n",virt_addr);
+		printk("Virtual address %llx is not existing.\n", virt_addr);
 #endif
 		return -EINVAL;
 	}
@@ -163,7 +163,7 @@ show_err_data_buffer(struct device *dev,
 {
 	unsigned int cpu=dev->id;
 
-	return sprintf(buf, "%lx, %lx, %lx\n",
+	return sprintf(buf, "%llx, %llx, %llx\n",
 			err_data_buffer[cpu].data1,
 			err_data_buffer[cpu].data2,
 			err_data_buffer[cpu].data3);
@@ -178,13 +178,13 @@ store_err_data_buffer(struct device *dev,
 	int ret;
 
 #ifdef ERR_INJ_DEBUG
-	printk("write err_data_buffer=[%lx,%lx,%lx] on cpu%d\n",
+	printk("write err_data_buffer=[%llx,%llx,%llx] on cpu%d\n",
 		 err_data_buffer[cpu].data1,
 		 err_data_buffer[cpu].data2,
 		 err_data_buffer[cpu].data3,
 		 cpu);
 #endif
-	ret=sscanf(buf, "%lx, %lx, %lx",
+	ret = sscanf(buf, "%llx, %llx, %llx",
 			&err_data_buffer[cpu].data1,
 			&err_data_buffer[cpu].data2,
 			&err_data_buffer[cpu].data3);
-- 
2.30.1

[PATCH AUTOSEL 5.10 30/33] cifs: revalidate mapping when we open files for SMB1 POSIX

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index be46fab4c96d..da057570bb93 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -164,6 +164,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 			goto posix_open_ret;
 		}
 	} else {
+		cifs_revalidate_mapping(*pinode);
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-- 
2.30.1

[PATCH AUTOSEL 5.10 31/33] cifs: Silently ignore unknown oplock break handle

[Sasha Levin]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 219481a8f90ec3a5eed9638fb35609e4b1aeece7 ]

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2misc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index db22d686c61f..be3df90bb2bc 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -745,8 +745,8 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 		}
 	}
 	spin_unlock(&cifs_tcp_ses_lock);
-	cifs_dbg(FYI, "Can not process oplock break for non-existent connection\n");
-	return false;
+	cifs_dbg(FYI, "No file id matched, oplock break ignored\n");
+	return true;
 }
 
 void
-- 
2.30.1

[PATCH AUTOSEL 5.10 32/33] io_uring: fix timeout cancel return code

[Sasha Levin]

From: Pavel Begunkov <asml.silence@gmail.com>

[ Upstream commit 1ee4160c73b2102a52bc97a4128a89c34821414f ]

When we cancel a timeout we should emit a sensible return code, like
-ECANCELED but not 0, otherwise it may trick users.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7b0ad1065e3bd1994722702bd0ba9e7bc9b0683b.1616696997.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 06e9c2181995..f635749766a7 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -1489,7 +1489,7 @@ static void io_queue_async_work(struct io_kiocb *req)
 		io_queue_linked_timeout(link);
 }
 
-static void io_kill_timeout(struct io_kiocb *req)
+static void io_kill_timeout(struct io_kiocb *req, int status)
 {
 	struct io_timeout_data *io = req->async_data;
 	int ret;
@@ -1499,7 +1499,7 @@ static void io_kill_timeout(struct io_kiocb *req)
 		atomic_set(&req->ctx->cq_timeouts,
 			atomic_read(&req->ctx->cq_timeouts) + 1);
 		list_del_init(&req->timeout.list);
-		io_cqring_fill_event(req, 0);
+		io_cqring_fill_event(req, status);
 		io_put_req_deferred(req, 1);
 	}
 }
@@ -1516,7 +1516,7 @@ static bool io_kill_timeouts(struct io_ring_ctx *ctx, struct task_struct *tsk,
 	spin_lock_irq(&ctx->completion_lock);
 	list_for_each_entry_safe(req, tmp, &ctx->timeout_list, timeout.list) {
 		if (io_match_task(req, tsk, files)) {
-			io_kill_timeout(req);
+			io_kill_timeout(req, -ECANCELED);
 			canceled++;
 		}
 	}
@@ -1568,7 +1568,7 @@ static void io_flush_timeouts(struct io_ring_ctx *ctx)
 			break;
 
 		list_del_init(&req->timeout.list);
-		io_kill_timeout(req);
+		io_kill_timeout(req, 0);
 	} while (!list_empty(&ctx->timeout_list));
 
 	ctx->cq_last_tm_flush = seq;
-- 
2.30.1

[PATCH AUTOSEL 5.10 33/33] math: Export mul_u64_u64_div_u64

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit bf45947864764548697e7515fe693e10f173f312 ]

Fixes: f51d7bf1dbe5 ("ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/math/div64.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/lib/math/div64.c b/lib/math/div64.c
index 3952a07130d8..edd1090c9edb 100644
--- a/lib/math/div64.c
+++ b/lib/math/div64.c
@@ -230,4 +230,5 @@ u64 mul_u64_u64_div_u64(u64 a, u64 b, u64 c)
 
 	return res + div64_u64(a * b, c);
 }
+EXPORT_SYMBOL(mul_u64_u64_div_u64);
 #endif
-- 
2.30.1