[PATCH AUTOSEL 4.9 01/10] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[PATCH AUTOSEL 4.9 01/10] net: pxa168_eth: Fix a potential data race in pxa168_eth_remove

[Sasha Levin]

From: Pavel Andrianov <andrianov@ispras.ru>

[ Upstream commit 0571a753cb07982cc82f4a5115e0b321da89e1f3 ]

pxa168_eth_remove() firstly calls unregister_netdev(),
then cancels a timeout work. unregister_netdev() shuts down a device
interface and removes it from the kernel tables. If the timeout occurs
in parallel, the timeout work (pxa168_eth_tx_timeout_task) performs stop
and open of the device. It may lead to an inconsistent state and memory
leaks.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 5d5000c8edf1..09cb0ac701e1 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -1571,8 +1571,8 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
-	unregister_netdev(dev);
 	cancel_work_sync(&pep->tx_timeout_task);
+	unregister_netdev(dev);
 	free_netdev(dev);
 	return 0;
 }
-- 
2.30.1

[PATCH AUTOSEL 4.9 02/10] mISDN: fix crash in fritzpci

[Sasha Levin]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit a9f81244d2e33e6dfcef120fefd30c96b3f7cdb0 ]

setup_fritz() in avmfritz.c might fail with -EIO and in this case the
isac.type and isac.write_reg is not initialized and remains 0(NULL).
A subsequent call to isac_release() will dereference isac->write_reg and
crash.

[    1.737444] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    1.737809] #PF: supervisor instruction fetch in kernel mode
[    1.738106] #PF: error_code(0x0010) - not-present page
[    1.738378] PGD 0 P4D 0
[    1.738515] Oops: 0010 [#1] SMP NOPTI
[    1.738711] CPU: 0 PID: 180 Comm: systemd-udevd Not tainted 5.12.0-rc2+ #78
[    1.739077] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-p
rebuilt.qemu.org 04/01/2014
[    1.739664] RIP: 0010:0x0
[    1.739807] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[    1.740200] RSP: 0018:ffffc9000027ba10 EFLAGS: 00010202
[    1.740478] RAX: 0000000000000000 RBX: ffff888102f41840 RCX: 0000000000000027
[    1.740853] RDX: 00000000000000ff RSI: 0000000000000020 RDI: ffff888102f41800
[    1.741226] RBP: ffffc9000027ba20 R08: ffff88817bc18440 R09: ffffc9000027b808
[    1.741600] R10: 0000000000000001 R11: 0000000000000001 R12: ffff888102f41840
[    1.741976] R13: 00000000fffffffb R14: ffff888102f41800 R15: ffff8881008b0000
[    1.742351] FS:  00007fda3a38a8c0(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000
[    1.742774] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.743076] CR2: ffffffffffffffd6 CR3: 00000001021ec000 CR4: 00000000000006f0
[    1.743452] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    1.743828] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    1.744206] Call Trace:
[    1.744339]  isac_release+0xcc/0xe0 [mISDNipac]
[    1.744582]  fritzpci_probe.cold+0x282/0x739 [avmfritz]
[    1.744861]  local_pci_probe+0x48/0x80
[    1.745063]  pci_device_probe+0x10f/0x1c0
[    1.745278]  really_probe+0xfb/0x420
[    1.745471]  driver_probe_device+0xe9/0x160
[    1.745693]  device_driver_attach+0x5d/0x70
[    1.745917]  __driver_attach+0x8f/0x150
[    1.746123]  ? device_driver_attach+0x70/0x70
[    1.746354]  bus_for_each_dev+0x7e/0xc0
[    1.746560]  driver_attach+0x1e/0x20
[    1.746751]  bus_add_driver+0x152/0x1f0
[    1.746957]  driver_register+0x74/0xd0
[    1.747157]  ? 0xffffffffc00d8000
[    1.747334]  __pci_register_driver+0x54/0x60
[    1.747562]  AVM_init+0x36/0x1000 [avmfritz]
[    1.747791]  do_one_initcall+0x48/0x1d0
[    1.747997]  ? __cond_resched+0x19/0x30
[    1.748206]  ? kmem_cache_alloc_trace+0x390/0x440
[    1.748458]  ? do_init_module+0x28/0x250
[    1.748669]  do_init_module+0x62/0x250
[    1.748870]  load_module+0x23ee/0x26a0
[    1.749073]  __do_sys_finit_module+0xc2/0x120
[    1.749307]  ? __do_sys_finit_module+0xc2/0x120
[    1.749549]  __x64_sys_finit_module+0x1a/0x20
[    1.749782]  do_syscall_64+0x38/0x90

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/mISDNipac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c
index 8d338ba366d0..01a1afde5d3c 100644
--- a/drivers/isdn/hardware/mISDN/mISDNipac.c
+++ b/drivers/isdn/hardware/mISDN/mISDNipac.c
@@ -711,7 +711,7 @@ isac_release(struct isac_hw *isac)
 {
 	if (isac->type & IPAC_TYPE_ISACX)
 		WriteISAC(isac, ISACX_MASK, 0xff);
-	else
+	else if (isac->type != 0)
 		WriteISAC(isac, ISAC_MASK, 0xff);
 	if (isac->dch.timer.function != NULL) {
 		del_timer(&isac->dch.timer);
-- 
2.30.1

[PATCH AUTOSEL 4.9 03/10] mac80211: fix double free in ibss_leave

[Sasha Levin]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 3bd801b14e0c5d29eeddc7336558beb3344efaa3 ]

Clear beacon ie pointer and ie length after free
in order to prevent double free.

==================================================================
BUG: KASAN: double-free or invalid-free \
in ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876

CPU: 0 PID: 8472 Comm: syz-executor100 Not tainted 5.11.0-rc6-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 print_address_description.constprop.0.cold+0x5b/0x2c6 mm/kasan/report.c:230
 kasan_report_invalid_free+0x51/0x80 mm/kasan/report.c:355
 ____kasan_slab_free+0xcc/0xe0 mm/kasan/common.c:341
 kasan_slab_free include/linux/kasan.h:192 [inline]
 __cache_free mm/slab.c:3424 [inline]
 kfree+0xed/0x270 mm/slab.c:3760
 ieee80211_ibss_leave+0x83/0xe0 net/mac80211/ibss.c:1876
 rdev_leave_ibss net/wireless/rdev-ops.h:545 [inline]
 __cfg80211_leave_ibss+0x19a/0x4c0 net/wireless/ibss.c:212
 __cfg80211_leave+0x327/0x430 net/wireless/core.c:1172
 cfg80211_leave net/wireless/core.c:1221 [inline]
 cfg80211_netdev_notifier_call+0x9e8/0x12c0 net/wireless/core.c:1335
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2040
 call_netdevice_notifiers_extack net/core/dev.c:2052 [inline]
 call_netdevice_notifiers net/core/dev.c:2066 [inline]
 __dev_close_many+0xee/0x2e0 net/core/dev.c:1586
 __dev_close net/core/dev.c:1624 [inline]
 __dev_change_flags+0x2cb/0x730 net/core/dev.c:8476
 dev_change_flags+0x8a/0x160 net/core/dev.c:8549
 dev_ifsioc+0x210/0xa70 net/core/dev_ioctl.c:265
 dev_ioctl+0x1b1/0xc40 net/core/dev_ioctl.c:511
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by: syzbot+93976391bf299d425f44@syzkaller.appspotmail.com
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20210213133653.367130-1-markus.theil@tu-ilmenau.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ibss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 0c0695eb2609..3796c24defcb 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -1862,6 +1862,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata)
 
 	/* remove beacon */
 	kfree(sdata->u.ibss.ie);
+	sdata->u.ibss.ie = NULL;
+	sdata->u.ibss.ie_len = 0;
 
 	/* on the next join, re-program HT parameters */
 	memset(&ifibss->ht_capa, 0, sizeof(ifibss->ht_capa));
-- 
2.30.1

[PATCH AUTOSEL 4.9 04/10] mac80211: choose first enabled channel for monitor

[Sasha Levin]

From: Karthikeyan Kathirvel <kathirve@codeaurora.org>

[ Upstream commit 041c881a0ba8a75f71118bd9766b78f04beed469 ]

Even if the first channel from sband channel list is invalid
or disabled mac80211 ends up choosing it as the default channel
for monitor interfaces, making them not usable.

Fix this by assigning the first available valid or enabled
channel instead.

Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
Link: https://lore.kernel.org/r/1615440547-7661-1-git-send-email-kathirve@codeaurora.org
[reword commit message, comment, code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/main.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index e3bbfb20ae82..f31fd21d59ba 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -906,8 +906,19 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 			continue;
 
 		if (!dflt_chandef.chan) {
+			/*
+			 * Assign the first enabled channel to dflt_chandef
+			 * from the list of channels
+			 */
+			for (i = 0; i < sband->n_channels; i++)
+				if (!(sband->channels[i].flags &
+						IEEE80211_CHAN_DISABLED))
+					break;
+			/* if none found then use the first anyway */
+			if (i == sband->n_channels)
+				i = 0;
 			cfg80211_chandef_create(&dflt_chandef,
-						&sband->channels[0],
+						&sband->channels[i],
 						NL80211_CHAN_NO_HT);
 			/* init channel we're on */
 			if (!local->use_chanctx && !local->_oper_chandef.chan) {
-- 
2.30.1

[PATCH AUTOSEL 4.9 05/10] drm/msm: Ratelimit invalid-fence message

[Sasha Levin]

From: Rob Clark <robdclark@chromium.org>

[ Upstream commit 7ad48d27a2846bfda29214fb454d001c3e02b9e7 ]

We have seen a couple cases where low memory situations cause something
bad to happen, followed by a flood of these messages obscuring the root
cause.  Lets ratelimit the dmesg spam so that next time it happens we
don't lose the kernel traces leading up to this.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/msm_fence.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_fence.c b/drivers/gpu/drm/msm/msm_fence.c
index a9b9b1c95a2e..9dbd17be51f7 100644
--- a/drivers/gpu/drm/msm/msm_fence.c
+++ b/drivers/gpu/drm/msm/msm_fence.c
@@ -56,7 +56,7 @@ int msm_wait_fence(struct msm_fence_context *fctx, uint32_t fence,
 	int ret;
 
 	if (fence > fctx->last_fence) {
-		DRM_ERROR("%s: waiting on invalid fence: %u (of %u)\n",
+		DRM_ERROR_RATELIMITED("%s: waiting on invalid fence: %u (of %u)\n",
 				fctx->name, fence, fctx->last_fence);
 		return -EINVAL;
 	}
-- 
2.30.1

[PATCH AUTOSEL 4.9 06/10] x86/build: Turn off -fcf-protection for realmode targets

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 9fcb51c14da2953de585c5c6e50697b8a6e91a7b ]

The new Ubuntu GCC packages turn on -fcf-protection globally,
which causes a build failure in the x86 realmode code:

  cc1: error: ‘-fcf-protection’ is not compatible with this target

Turn it off explicitly on compilers that understand this option.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210323124846.1584944-1-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 9f0099c46c88..9ebbd4892557 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -34,7 +34,7 @@ REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os -D__KERNEL__ \
 		   -DDISABLE_BRANCH_PROFILING \
 		   -Wall -Wstrict-prototypes -march=i386 -mregparm=3 \
 		   -fno-strict-aliasing -fomit-frame-pointer -fno-pic \
-		   -mno-mmx -mno-sse
+		   -mno-mmx -mno-sse $(call cc-option,-fcf-protection=none)
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
-- 
2.30.1

[PATCH AUTOSEL 4.9 07/10] scsi: target: pscsi: Clean up after failure in pscsi_map_sg()

[Sasha Levin]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ]

If pscsi_map_sg() fails, make sure to drop references to already allocated
bios.

Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pscsi.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c
index ef1c8c158f66..079db0bd3917 100644
--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -951,6 +951,14 @@ pscsi_map_sg(struct se_cmd *cmd, struct scatterlist *sgl, u32 sgl_nents,
 
 	return 0;
 fail:
+	if (bio)
+		bio_put(bio);
+	while (req->bio) {
+		bio = req->bio;
+		req->bio = bio->bi_next;
+		bio_put(bio);
+	}
+	req->biotail = NULL;
 	return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 }
 
-- 
2.30.1

[PATCH AUTOSEL 4.9 08/10] ia64: mca: allocate early mca with GFP_ATOMIC

[Sasha Levin]

From: Sergei Trofimovich <slyfox@gentoo.org>

[ Upstream commit f2a419cf495f95cac49ea289318b833477e1a0e2 ]

The sleep warning happens at early boot right at secondary CPU
activation bootup:

    smp: Bringing up secondary CPUs ...
    BUG: sleeping function called from invalid context at mm/page_alloc.c:4942
    in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.12.0-rc2-00007-g79e228d0b611-dirty #99
    ..
    Call Trace:
      show_stack+0x90/0xc0
      dump_stack+0x150/0x1c0
      ___might_sleep+0x1c0/0x2a0
      __might_sleep+0xa0/0x160
      __alloc_pages_nodemask+0x1a0/0x600
      alloc_page_interleave+0x30/0x1c0
      alloc_pages_current+0x2c0/0x340
      __get_free_pages+0x30/0xa0
      ia64_mca_cpu_init+0x2d0/0x3a0
      cpu_init+0x8b0/0x1440
      start_secondary+0x60/0x700
      start_ap+0x750/0x780
    Fixed BSP b0 value from CPU 1

As I understand interrupts are not enabled yet and system has a lot of
memory.  There is little chance to sleep and switch to GFP_ATOMIC should
be a no-op.

Link: https://lkml.kernel.org/r/20210315085045.204414-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/mca.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 9509cc73b9c6..64ae9cde8bdb 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -1858,7 +1858,7 @@ ia64_mca_cpu_init(void *cpu_data)
 			data = mca_bootmem();
 			first_time = 0;
 		} else
-			data = (void *)__get_free_pages(GFP_KERNEL,
+			data = (void *)__get_free_pages(GFP_ATOMIC,
 							get_order(sz));
 		if (!data)
 			panic("Could not allocate MCA memory for cpu %d\n",
-- 
2.30.1

[PATCH AUTOSEL 4.9 09/10] cifs: revalidate mapping when we open files for SMB1 POSIX

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit cee8f4f6fcabfdf229542926128e9874d19016d5 ]

RHBZ: 1933527

Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/file.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 24508b69e78b..e2ce90fc504e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -163,6 +163,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
 			goto posix_open_ret;
 		}
 	} else {
+		cifs_revalidate_mapping(*pinode);
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-- 
2.30.1

[PATCH AUTOSEL 4.9 10/10] cifs: Silently ignore unknown oplock break handle

[Sasha Levin]

From: Vincent Whitchurch <vincent.whitchurch@axis.com>

[ Upstream commit 219481a8f90ec3a5eed9638fb35609e4b1aeece7 ]

Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1.  The debug message which is printed for
these unknown handles may also be misleading, so fix that too.

The SMB2 lease break path is not affected by this patch.

Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".

 CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
 00000000: 424d53fe 00000040 00000000 00000012  .SMB@...........
 00000010: 00000001 00000000 ffffffff ffffffff  ................
 00000020: 00000000 00000000 00000000 00000000  ................
 00000030: 00000000 00000000 00000000 00000000  ................

Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/smb2misc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c
index bddb2d7b3982..075b285bbd3e 100644
--- a/fs/cifs/smb2misc.c
+++ b/fs/cifs/smb2misc.c
@@ -651,8 +651,8 @@ smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server)
 		}
 	}
 	spin_unlock(&cifs_tcp_ses_lock);
-	cifs_dbg(FYI, "Can not process oplock break for non-existent connection\n");
-	return false;
+	cifs_dbg(FYI, "No file id matched, oplock break ignored\n");
+	return true;
 }
 
 void
-- 
2.30.1