[PATCH 4.19 00/56] 4.19.185-rc1 review

[PATCH 4.19 00/56] 4.19.185-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.185 release.
There are 56 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 07 Apr 2021 08:50:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.185-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.185-rc1

Du Cheng <ducheng2@gmail.com>
    drivers: video: fbcon: fix NULL dereference in fbcon_cursor()

Atul Gopinathan <atulgopinathan@gmail.com>
    staging: rtl8192e: Change state information from u16 to u8

Atul Gopinathan <atulgopinathan@gmail.com>
    staging: rtl8192e: Fix incorrect source in memcpy()

Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
    usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.

Tong Zhang <ztong0001@gmail.com>
    usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference

Johan Hovold <johan@kernel.org>
    USB: cdc-acm: fix use-after-free after probe failure

Johan Hovold <johan@kernel.org>
    USB: cdc-acm: fix double free on probe failure

Oliver Neukum <oneukum@suse.com>
    USB: cdc-acm: downgrade message to debug

Oliver Neukum <oneukum@suse.com>
    USB: cdc-acm: untangle a circular dependency between callback and softint

Oliver Neukum <oneukum@suse.com>
    cdc-acm: fix BREAK rx code path adding necessary calls

Chunfeng Yun <chunfeng.yun@mediatek.com>
    usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

Tony Lindgren <tony@atomide.com>
    usb: musb: Fix suspend with devices connected for a64

Vincent Palatin <vpalatin@chromium.org>
    USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem

Shuah Khan <skhan@linuxfoundation.org>
    usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()

Zheyu Ma <zheyuma97@gmail.com>
    firewire: nosy: Fix a use-after-free bug in nosy_ioctl()

Dinghao Liu <dinghao.liu@zju.edu.cn>
    extcon: Fix error handling in extcon_dev_register

Krzysztof Kozlowski <krzk@kernel.org>
    extcon: Add stubs for extcon_register_notifier_all() functions

Wang Panzhenzhuan <randy.wang@rock-chips.com>
    pinctrl: rockchip: fix restore error in resume

Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
    reiserfs: update reiserfs_xattrs_initialized() condition

Xℹ Ruoyao <xry111@mengyan1223.wang>
    drm/amdgpu: check alignment on CPU page for bo map

Nirmoy Das <nirmoy.das@amd.com>
    drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()

Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
    mm: fix race by making init_zero_pfn() early_initcall

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Fix stack trace event size

Adrian Hunter <adrian.hunter@intel.com>
    PM: runtime: Fix ordering in pm_runtime_get_suppliers()

Adrian Hunter <adrian.hunter@intel.com>
    PM: runtime: Fix race getting/putting suppliers at probe

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO

Ikjoon Jang <ikjn@chromium.org>
    ALSA: usb-audio: Apply sample rate quirk to Logitech Connect

Jesper Dangaard Brouer <brouer@redhat.com>
    bpf: Remove MTU check in __bpf_skb_max_len

Tong Zhang <ztong0001@gmail.com>
    net: wan/lmc: unregister device when no matching device is found

Doug Brown <doug@schmorgal.com>
    appletalk: Fix skb allocation size in loopback case

Nathan Rossi <nathan.rossi@digi.com>
    net: ethernet: aquantia: Handle error cleanup of start on open

Shuah Khan <skhan@linuxfoundation.org>
    ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()

Luca Pesce <luca.pesce@vimar.com>
    brcmfmac: clear EAP/association status bits on linkdown events

zhangyi (F) <yi.zhang@huawei.com>
    ext4: do not iput inode under running transaction in ext4_rename()

Waiman Long <longman@redhat.com>
    locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling

Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
    thermal/core: Add NULL pointer check before using cooling device stats

Sameer Pujar <spujar@nvidia.com>
    ASoC: rt5659: Update MCLK rate in set_sysclk()

Tong Zhang <ztong0001@gmail.com>
    staging: comedi: cb_pcidas64: fix request_irq() warn

Tong Zhang <ztong0001@gmail.com>
    staging: comedi: cb_pcidas: fix request_irq() warn

Alexey Dobriyan <adobriyan@gmail.com>
    scsi: qla2xxx: Fix broken #endif placement

Lv Yunlong <lyl2019@mail.ustc.edu.cn>
    scsi: st: Fix a use after free in st_open()

Laurent Vivier <lvivier@redhat.com>
    vhost: Fix vhost_vq_reset()

Lucas Tanure <tanureal@opensource.cirrus.com>
    ASoC: cs42l42: Always wait at least 3ms after reset

Lucas Tanure <tanureal@opensource.cirrus.com>
    ASoC: cs42l42: Fix mixer volume control

Lucas Tanure <tanureal@opensource.cirrus.com>
    ASoC: cs42l42: Fix channel width support

Lucas Tanure <tanureal@opensource.cirrus.com>
    ASoC: cs42l42: Fix Bitclock polarity inversion

Hans de Goede <hdegoede@redhat.com>
    ASoC: es8316: Simplify adc_pga_gain_tlv table

Benjamin Rood <benjaminjrood@gmail.com>
    ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe

Hans de Goede <hdegoede@redhat.com>
    ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10

Hans de Goede <hdegoede@redhat.com>
    ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10

J. Bruce Fields <bfields@redhat.com>
    rpc: fix NULL dereference on kmalloc failure

Zhaolong Zhang <zhangzl2013@126.com>
    ext4: fix bh ref count on error paths

Jakub Kicinski <kuba@kernel.org>
    ipv6: weaken the v4mapped source check

Alexander Ovechkin <ovov@yandex-team.ru>
    tcp: relookup sock for RST+ACK packets handled by obsolete req sock

David Brazdil <dbrazdil@google.com>
    selinux: vsock: Set SID for socket returned by accept()


-------------

Diffstat:

 Makefile                                           |  4 +-
 drivers/base/power/runtime.c                       | 10 ++-
 drivers/extcon/extcon.c                            |  1 +
 drivers/firewire/nosy.c                            |  9 ++-
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c             | 10 +--
 drivers/net/ethernet/aquantia/atlantic/aq_main.c   |  4 +-
 drivers/net/wan/lmc/lmc_main.c                     |  2 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c          |  7 +-
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |  7 +-
 drivers/pinctrl/pinctrl-rockchip.c                 | 13 ++--
 drivers/scsi/qla2xxx/qla_target.h                  |  2 +-
 drivers/scsi/st.c                                  |  2 +-
 drivers/staging/comedi/drivers/cb_pcidas.c         |  2 +-
 drivers/staging/comedi/drivers/cb_pcidas64.c       |  2 +-
 drivers/staging/rtl8192e/rtllib.h                  |  2 +-
 drivers/staging/rtl8192e/rtllib_rx.c               |  2 +-
 drivers/thermal/thermal_sysfs.c                    |  3 +
 drivers/usb/class/cdc-acm.c                        | 61 ++++++++++++------
 drivers/usb/core/quirks.c                          |  4 ++
 drivers/usb/dwc2/hcd.c                             |  2 +-
 drivers/usb/gadget/udc/amd5536udc_pci.c            | 10 +--
 drivers/usb/host/xhci-mtk.c                        | 10 ++-
 drivers/usb/musb/musb_core.c                       | 12 ++--
 drivers/usb/usbip/vhci_hcd.c                       |  2 +
 drivers/vhost/vhost.c                              |  2 +-
 drivers/video/fbdev/core/fbcon.c                   |  3 +
 fs/ext4/inode.c                                    |  6 +-
 fs/ext4/namei.c                                    | 18 +++---
 fs/reiserfs/xattr.h                                |  2 +-
 include/linux/extcon.h                             | 23 +++++++
 include/net/inet_connection_sock.h                 |  2 +-
 kernel/locking/mutex.c                             | 25 ++++----
 kernel/trace/trace.c                               |  3 +-
 mm/memory.c                                        |  2 +-
 net/appletalk/ddp.c                                | 33 ++++++----
 net/core/filter.c                                  | 12 ++--
 net/dccp/ipv6.c                                    |  5 ++
 net/ipv4/inet_connection_sock.c                    |  7 +-
 net/ipv4/tcp_minisocks.c                           |  7 +-
 net/ipv6/ip6_input.c                               | 10 ---
 net/ipv6/tcp_ipv6.c                                |  5 ++
 net/sunrpc/auth_gss/svcauth_gss.c                  | 11 ++--
 net/vmw_vsock/af_vsock.c                           |  1 +
 sound/pci/hda/patch_realtek.c                      |  3 +-
 sound/soc/codecs/cs42l42.c                         | 74 ++++++++++------------
 sound/soc/codecs/cs42l42.h                         | 13 ++--
 sound/soc/codecs/es8316.c                          |  9 +--
 sound/soc/codecs/rt5640.c                          |  4 +-
 sound/soc/codecs/rt5651.c                          |  4 +-
 sound/soc/codecs/rt5659.c                          |  5 ++
 sound/soc/codecs/sgtl5000.c                        |  2 +-
 sound/usb/quirks.c                                 |  1 +
 52 files changed, 293 insertions(+), 182 deletions(-)

[PATCH 4.19 01/56] selinux: vsock: Set SID for socket returned by accept()

[Greg Kroah-Hartman]

From: David Brazdil <dbrazdil@google.com>

[ Upstream commit 1f935e8e72ec28dddb2dc0650b3b6626a293d94b ]

For AF_VSOCK, accept() currently returns sockets that are unlabelled.
Other socket families derive the child's SID from the SID of the parent
and the SID of the incoming packet. This is typically done as the
connected socket is placed in the queue that accept() removes from.

Reuse the existing 'security_sk_clone' hook to copy the SID from the
parent (server) socket to the child. There is no packet SID in this
case.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/af_vsock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 4b65db13e1bb..aceafec612a8 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -628,6 +628,7 @@ struct sock *__vsock_create(struct net *net,
 		vsk->trusted = psk->trusted;
 		vsk->owner = get_cred(psk->owner);
 		vsk->connect_timeout = psk->connect_timeout;
+		security_sk_clone(parent, sk);
 	} else {
 		vsk->trusted = ns_capable_noaudit(&init_user_ns, CAP_NET_ADMIN);
 		vsk->owner = get_current_cred();
-- 
2.30.1

[PATCH 4.19 02/56] tcp: relookup sock for RST+ACK packets handled by obsolete req sock

[Greg Kroah-Hartman]

From: Alexander Ovechkin <ovov@yandex-team.ru>

commit 7233da86697efef41288f8b713c10c2499cffe85 upstream.

Currently tcp_check_req can be called with obsolete req socket for which big
socket have been already created (because of CPU race or early demux
assigning req socket to multiple packets in gro batch).

Commit e0f9759f530bf789e984 ("tcp: try to keep packet if SYN_RCV race
is lost") added retry in case when tcp_check_req is called for PSH|ACK packet.
But if client sends RST+ACK immediatly after connection being
established (it is performing healthcheck, for example) retry does not
occur. In that case tcp_check_req tries to close req socket,
leaving big socket active.

Fixes: e0f9759f530b ("tcp: try to keep packet if SYN_RCV race is lost")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Reported-by: Oleg Senin <olegsenin@yandex-team.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/inet_connection_sock.h | 2 +-
 net/ipv4/inet_connection_sock.c    | 7 +++++--
 net/ipv4/tcp_minisocks.c           | 7 +++++--
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index fc9d6e37552d..da8a582ab032 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -288,7 +288,7 @@ static inline int inet_csk_reqsk_queue_is_full(const struct sock *sk)
 	return inet_csk_reqsk_queue_len(sk) >= sk->sk_max_ack_backlog;
 }
 
-void inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req);
+bool inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req);
 void inet_csk_reqsk_queue_drop_and_put(struct sock *sk, struct request_sock *req);
 
 void inet_csk_destroy_sock(struct sock *sk);
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 534e2598981d..439a55d1aa99 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -698,12 +698,15 @@ static bool reqsk_queue_unlink(struct request_sock_queue *queue,
 	return found;
 }
 
-void inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req)
+bool inet_csk_reqsk_queue_drop(struct sock *sk, struct request_sock *req)
 {
-	if (reqsk_queue_unlink(&inet_csk(sk)->icsk_accept_queue, req)) {
+	bool unlinked = reqsk_queue_unlink(&inet_csk(sk)->icsk_accept_queue, req);
+
+	if (unlinked) {
 		reqsk_queue_removed(&inet_csk(sk)->icsk_accept_queue, req);
 		reqsk_put(req);
 	}
+	return unlinked;
 }
 EXPORT_SYMBOL(inet_csk_reqsk_queue_drop);
 
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 9436fb9b6a3d..a20b393b4501 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -815,8 +815,11 @@ embryonic_reset:
 		tcp_reset(sk);
 	}
 	if (!fastopen) {
-		inet_csk_reqsk_queue_drop(sk, req);
-		__NET_INC_STATS(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
+		bool unlinked = inet_csk_reqsk_queue_drop(sk, req);
+
+		if (unlinked)
+			__NET_INC_STATS(sock_net(sk), LINUX_MIB_EMBRYONICRSTS);
+		*req_stolen = !unlinked;
 	}
 	return NULL;
 }
-- 
2.30.1

[PATCH 4.19 03/56] ipv6: weaken the v4mapped source check

[Greg Kroah-Hartman]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit dcc32f4f183ab8479041b23a1525d48233df1d43 ]

This reverts commit 6af1799aaf3f1bc8defedddfa00df3192445bbf3.

Commit 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped
source address") introduced an input check against v4mapped addresses.
Use of such addresses on the wire is indeed questionable and not
allowed on public Internet. As the commit pointed out

  https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02

lists potential issues.

Unfortunately there are applications which use v4mapped addresses,
and breaking them is a clear regression. For example v4mapped
addresses (or any semi-valid addresses, really) may be used
for uni-direction event streams or packet export.

Since the issue which sparked the addition of the check was with
TCP and request_socks in particular push the check down to TCPv6
and DCCP. This restores the ability to receive UDPv6 packets with
v4mapped address as the source.

Keep using the IPSTATS_MIB_INHDRERRORS statistic to minimize the
user-visible changes.

Fixes: 6af1799aaf3f ("ipv6: drop incoming packets having a v4mapped source address")
Reported-by: Sunyi Shao <sunyishao@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dccp/ipv6.c      |  5 +++++
 net/ipv6/ip6_input.c | 10 ----------
 net/ipv6/tcp_ipv6.c  |  5 +++++
 3 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index b438bed6749d..2cd3508a3786 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -319,6 +319,11 @@ static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 	if (!ipv6_unicast_destination(skb))
 		return 0;	/* discard, don't send a reset here */
 
+	if (ipv6_addr_v4mapped(&ipv6_hdr(skb)->saddr)) {
+		__IP6_INC_STATS(sock_net(sk), NULL, IPSTATS_MIB_INHDRERRORS);
+		return 0;
+	}
+
 	if (dccp_bad_service_code(sk, service)) {
 		dcb->dccpd_reset_code = DCCP_RESET_CODE_BAD_SERVICE_CODE;
 		goto drop;
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index acf0749ee5bb..57d84accbf1e 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -222,16 +222,6 @@ static struct sk_buff *ip6_rcv_core(struct sk_buff *skb, struct net_device *dev,
 	if (ipv6_addr_is_multicast(&hdr->saddr))
 		goto err;
 
-	/* While RFC4291 is not explicit about v4mapped addresses
-	 * in IPv6 headers, it seems clear linux dual-stack
-	 * model can not deal properly with these.
-	 * Security models could be fooled by ::ffff:127.0.0.1 for example.
-	 *
-	 * https://tools.ietf.org/html/draft-itojun-v6ops-v4mapped-harmful-02
-	 */
-	if (ipv6_addr_v4mapped(&hdr->saddr))
-		goto err;
-
 	skb->transport_header = skb->network_header + sizeof(*hdr);
 	IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr);
 
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 6e84f2eb08d6..8d822df83b08 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1039,6 +1039,11 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 	if (!ipv6_unicast_destination(skb))
 		goto drop;
 
+	if (ipv6_addr_v4mapped(&ipv6_hdr(skb)->saddr)) {
+		__IP6_INC_STATS(sock_net(sk), NULL, IPSTATS_MIB_INHDRERRORS);
+		return 0;
+	}
+
 	return tcp_conn_request(&tcp6_request_sock_ops,
 				&tcp_request_sock_ipv6_ops, sk, skb);
 
-- 
2.30.1

[PATCH 4.19 04/56] ext4: fix bh ref count on error paths

[Greg Kroah-Hartman]

From: Zhaolong Zhang <zhangzl2013@126.com>

[ Upstream commit c915fb80eaa6194fa9bd0a4487705cd5b0dda2f1 ]

__ext4_journalled_writepage should drop bhs' ref count on error paths

Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com>
Link: https://lore.kernel.org/r/1614678151-70481-1-git-send-email-zhangzl2013@126.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 1c6fd526ea97..7959aae4857e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2072,13 +2072,13 @@ static int __ext4_journalled_writepage(struct page *page,
 	if (!ret)
 		ret = err;
 
-	if (!ext4_has_inline_data(inode))
-		ext4_walk_page_buffers(NULL, page_bufs, 0, len,
-				       NULL, bput_one);
 	ext4_set_inode_state(inode, EXT4_STATE_JDATA);
 out:
 	unlock_page(page);
 out_no_pagelock:
+	if (!inline_data && page_bufs)
+		ext4_walk_page_buffers(NULL, page_bufs, 0, len,
+				       NULL, bput_one);
 	brelse(inode_bh);
 	return ret;
 }
-- 
2.30.1

[PATCH 4.19 05/56] rpc: fix NULL dereference on kmalloc failure

[Greg Kroah-Hartman]

From: J. Bruce Fields <bfields@redhat.com>

[ Upstream commit 0ddc942394013f08992fc379ca04cffacbbe3dae ]

I think this is unlikely but possible:

svc_authenticate sets rq_authop and calls svcauth_gss_accept.  The
kmalloc(sizeof(*svcdata), GFP_KERNEL) fails, leaving rq_auth_data NULL,
and returning SVC_DENIED.

This causes svc_process_common to go to err_bad_auth, and eventually
call svc_authorise.  That calls ->release == svcauth_gss_release, which
tries to dereference rq_auth_data.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Link: https://lore.kernel.org/linux-nfs/3F1B347F-B809-478F-A1E9-0BE98E22B0F0@oracle.com/T/#t
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index ab086081be9c..a85d78d2bdb7 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1766,11 +1766,14 @@ static int
 svcauth_gss_release(struct svc_rqst *rqstp)
 {
 	struct gss_svc_data *gsd = (struct gss_svc_data *)rqstp->rq_auth_data;
-	struct rpc_gss_wire_cred *gc = &gsd->clcred;
+	struct rpc_gss_wire_cred *gc;
 	struct xdr_buf *resbuf = &rqstp->rq_res;
 	int stat = -EINVAL;
 	struct sunrpc_net *sn = net_generic(SVC_NET(rqstp), sunrpc_net_id);
 
+	if (!gsd)
+		goto out;
+	gc = &gsd->clcred;
 	if (gc->gc_proc != RPC_GSS_PROC_DATA)
 		goto out;
 	/* Release can be called twice, but we only wrap once. */
@@ -1811,10 +1814,10 @@ out_err:
 	if (rqstp->rq_cred.cr_group_info)
 		put_group_info(rqstp->rq_cred.cr_group_info);
 	rqstp->rq_cred.cr_group_info = NULL;
-	if (gsd->rsci)
+	if (gsd && gsd->rsci) {
 		cache_put(&gsd->rsci->h, sn->rsc_cache);
-	gsd->rsci = NULL;
-
+		gsd->rsci = NULL;
+	}
 	return stat;
 }
 
-- 
2.30.1

[PATCH 4.19 06/56] ASoC: rt5640: Fix dac- and adc- vol-tlv values being off by a factor of 10

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ]

The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.

E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.

Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.

Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5640.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 974e1a449172..63e19a6a9790 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -342,9 +342,9 @@ static bool rt5640_readable_register(struct device *dev, unsigned int reg)
 }
 
 static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
-static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0);
 static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
-static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000);
 static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
 
 /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
-- 
2.30.1

[PATCH 4.19 07/56] ASoC: rt5651: Fix dac- and adc- vol-tlv values being off by a factor of 10

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ]

The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.

E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.

Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.

Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5651.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index 985852fd9723..318a4c9b380f 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -288,9 +288,9 @@ static bool rt5651_readable_register(struct device *dev, unsigned int reg)
 }
 
 static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
-static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -6562, 0);
 static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
-static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -17625, 375, 0);
+static const DECLARE_TLV_DB_MINMAX(adc_vol_tlv, -1762, 3000);
 static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
 
 /* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
-- 
2.30.1

[PATCH 4.19 08/56] ASoC: sgtl5000: set DAP_AVC_CTRL register to correct default value on probe

[Greg Kroah-Hartman]

From: Benjamin Rood <benjaminjrood@gmail.com>

[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]

According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:

| BITS  | FIELD       | RW | RESET | DEFINITION                        |
| 15    | RSVD        | RO | 0x0   | Reserved                          |
| 14    | RSVD        | RW | 0x1   | Reserved                          |
| 13:12 | MAX_GAIN    | RW | 0x1   | Max Gain of AVC in expander mode  |
| 11:10 | RSVD        | RO | 0x0   | Reserved                          |
| 9:8   | LBI_RESP    | RW | 0x1   | Integrator Response               |
| 7:6   | RSVD        | RO | 0x0   | Reserved                          |
| 5     | HARD_LMT_EN | RW | 0x0   | Enable hard limiter mode          |
| 4:1   | RSVD        | RO | 0x0   | Reserved                          |
| 0     | EN          | RW | 0x0   | Enable/Disable AVC                |

The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510.  This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED.  It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0.  While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.

The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'.  Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.

Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald@curbellmedical.com> for finding this error in the first
place.

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 7c0a06b487f7..17255e9683f5 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -71,7 +71,7 @@ static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_DAP_EQ_BASS_BAND4,		0x002f },
 	{ SGTL5000_DAP_MAIN_CHAN,		0x8000 },
 	{ SGTL5000_DAP_MIX_CHAN,		0x0000 },
-	{ SGTL5000_DAP_AVC_CTRL,		0x0510 },
+	{ SGTL5000_DAP_AVC_CTRL,		0x5100 },
 	{ SGTL5000_DAP_AVC_THRESHOLD,		0x1473 },
 	{ SGTL5000_DAP_AVC_ATTACK,		0x0028 },
 	{ SGTL5000_DAP_AVC_DECAY,		0x0050 },
-- 
2.30.1

[PATCH 4.19 09/56] ASoC: es8316: Simplify adc_pga_gain_tlv table

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit bb18c678754ce1514100fb4c0bf6113b5af36c48 ]

Most steps in this table are steps of 3dB (300 centi-dB), so we can
simplify the table.

This not only reduces the amount of space it takes inside the kernel,
this also makes alsa-lib's mixer code actually accept the table, where
as before this change alsa-lib saw the "ADC PGA Gain" control as a
control without a dB scale.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/es8316.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 9ebe77c3784a..57130edaf3ab 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -56,13 +56,8 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(adc_pga_gain_tlv,
 	1, 1, TLV_DB_SCALE_ITEM(0, 0, 0),
 	2, 2, TLV_DB_SCALE_ITEM(250, 0, 0),
 	3, 3, TLV_DB_SCALE_ITEM(450, 0, 0),
-	4, 4, TLV_DB_SCALE_ITEM(700, 0, 0),
-	5, 5, TLV_DB_SCALE_ITEM(1000, 0, 0),
-	6, 6, TLV_DB_SCALE_ITEM(1300, 0, 0),
-	7, 7, TLV_DB_SCALE_ITEM(1600, 0, 0),
-	8, 8, TLV_DB_SCALE_ITEM(1800, 0, 0),
-	9, 9, TLV_DB_SCALE_ITEM(2100, 0, 0),
-	10, 10, TLV_DB_SCALE_ITEM(2400, 0, 0),
+	4, 7, TLV_DB_SCALE_ITEM(700, 300, 0),
+	8, 10, TLV_DB_SCALE_ITEM(1800, 300, 0),
 );
 
 static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpout_vol_tlv,
-- 
2.30.1

[PATCH 4.19 10/56] ASoC: cs42l42: Fix Bitclock polarity inversion

[Greg Kroah-Hartman]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit e793c965519b8b7f2fea51a48398405e2a501729 ]

The driver was setting bit clock polarity opposite to intended polarity.
Also simplify the code by grouping ADC and DAC clock configurations into
a single field.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 20 ++++++++------------
 sound/soc/codecs/cs42l42.h | 11 ++++++-----
 2 files changed, 14 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 651329bf9743..c7baa19bf317 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -801,27 +801,23 @@ static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
 	/* Bitclock/frame inversion */
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
 	case SND_SOC_DAIFMT_NB_NF:
+		asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_NB_IF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_LCPOL_IN_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_SCPOL_NOR << CS42L42_ASP_SCPOL_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_IB_NF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_SCPOL_IN_DAC_SHIFT;
 		break;
 	case SND_SOC_DAIFMT_IB_IF:
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_LCPOL_IN_SHIFT;
-		asp_cfg_val |= CS42L42_ASP_POL_INV <<
-				CS42L42_ASP_SCPOL_IN_DAC_SHIFT;
+		asp_cfg_val |= CS42L42_ASP_LCPOL_INV << CS42L42_ASP_LCPOL_SHIFT;
 		break;
 	}
 
-	snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG,
-				CS42L42_ASP_MODE_MASK |
-				CS42L42_ASP_SCPOL_IN_DAC_MASK |
-				CS42L42_ASP_LCPOL_IN_MASK, asp_cfg_val);
+	snd_soc_component_update_bits(component, CS42L42_ASP_CLK_CFG, CS42L42_ASP_MODE_MASK |
+								      CS42L42_ASP_SCPOL_MASK |
+								      CS42L42_ASP_LCPOL_MASK,
+								      asp_cfg_val);
 
 	return 0;
 }
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 09b0a93203ef..9d04ed75e5c8 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -262,11 +262,12 @@
 #define CS42L42_ASP_SLAVE_MODE		0x00
 #define CS42L42_ASP_MODE_SHIFT		4
 #define CS42L42_ASP_MODE_MASK		(1 << CS42L42_ASP_MODE_SHIFT)
-#define CS42L42_ASP_SCPOL_IN_DAC_SHIFT	2
-#define CS42L42_ASP_SCPOL_IN_DAC_MASK	(1 << CS42L42_ASP_SCPOL_IN_DAC_SHIFT)
-#define CS42L42_ASP_LCPOL_IN_SHIFT	0
-#define CS42L42_ASP_LCPOL_IN_MASK	(1 << CS42L42_ASP_LCPOL_IN_SHIFT)
-#define CS42L42_ASP_POL_INV		1
+#define CS42L42_ASP_SCPOL_SHIFT		2
+#define CS42L42_ASP_SCPOL_MASK		(3 << CS42L42_ASP_SCPOL_SHIFT)
+#define CS42L42_ASP_SCPOL_NOR		3
+#define CS42L42_ASP_LCPOL_SHIFT		0
+#define CS42L42_ASP_LCPOL_MASK		(3 << CS42L42_ASP_LCPOL_SHIFT)
+#define CS42L42_ASP_LCPOL_INV		3
 
 #define CS42L42_ASP_FRM_CFG		(CS42L42_PAGE_12 + 0x08)
 #define CS42L42_ASP_STP_SHIFT		4
-- 
2.30.1

[PATCH 4.19 11/56] ASoC: cs42l42: Fix channel width support

[Greg Kroah-Hartman]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 2bdc4f5c6838f7c3feb4fe68e4edbeea158ec0a2 ]

Remove the hard coded 32 bits width and replace with the correct width
calculated by params_width.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-3-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 47 ++++++++++++++++++--------------------
 sound/soc/codecs/cs42l42.h |  1 -
 2 files changed, 22 insertions(+), 26 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index c7baa19bf317..a5bd9cff7085 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -695,24 +695,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component)
 					CS42L42_CLK_OASRC_SEL_MASK,
 					CS42L42_CLK_OASRC_SEL_12 <<
 					CS42L42_CLK_OASRC_SEL_SHIFT);
-			/* channel 1 on low LRCLK, 32 bit */
-			snd_soc_component_update_bits(component,
-					CS42L42_ASP_RX_DAI0_CH1_AP_RES,
-					CS42L42_ASP_RX_CH_AP_MASK |
-					CS42L42_ASP_RX_CH_RES_MASK,
-					(CS42L42_ASP_RX_CH_AP_LOW <<
-					CS42L42_ASP_RX_CH_AP_SHIFT) |
-					(CS42L42_ASP_RX_CH_RES_32 <<
-					CS42L42_ASP_RX_CH_RES_SHIFT));
-			/* Channel 2 on high LRCLK, 32 bit */
-			snd_soc_component_update_bits(component,
-					CS42L42_ASP_RX_DAI0_CH2_AP_RES,
-					CS42L42_ASP_RX_CH_AP_MASK |
-					CS42L42_ASP_RX_CH_RES_MASK,
-					(CS42L42_ASP_RX_CH_AP_HI <<
-					CS42L42_ASP_RX_CH_AP_SHIFT) |
-					(CS42L42_ASP_RX_CH_RES_32 <<
-					CS42L42_ASP_RX_CH_RES_SHIFT));
 			if (pll_ratio_table[i].mclk_src_sel == 0) {
 				/* Pass the clock straight through */
 				snd_soc_component_update_bits(component,
@@ -828,14 +810,29 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
-	int retval;
+	unsigned int width = (params_width(params) / 8) - 1;
+	unsigned int val = 0;
 
 	cs42l42->srate = params_rate(params);
-	cs42l42->swidth = params_width(params);
 
-	retval = cs42l42_pll_config(component);
+	switch(substream->stream) {
+	case SNDRV_PCM_STREAM_PLAYBACK:
+		val |= width << CS42L42_ASP_RX_CH_RES_SHIFT;
+		/* channel 1 on low LRCLK */
+		snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH1_AP_RES,
+							 CS42L42_ASP_RX_CH_AP_MASK |
+							 CS42L42_ASP_RX_CH_RES_MASK, val);
+		/* Channel 2 on high LRCLK */
+		val |= CS42L42_ASP_RX_CH_AP_HI << CS42L42_ASP_RX_CH_AP_SHIFT;
+		snd_soc_component_update_bits(component, CS42L42_ASP_RX_DAI0_CH2_AP_RES,
+							 CS42L42_ASP_RX_CH_AP_MASK |
+							 CS42L42_ASP_RX_CH_RES_MASK, val);
+		break;
+	default:
+		break;
+	}
 
-	return retval;
+	return cs42l42_pll_config(component);
 }
 
 static int cs42l42_set_sysclk(struct snd_soc_dai *dai,
@@ -900,9 +897,9 @@ static int cs42l42_digital_mute(struct snd_soc_dai *dai, int mute)
 	return 0;
 }
 
-#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S18_3LE | \
-			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE | \
-			SNDRV_PCM_FMTBIT_S32_LE)
+#define CS42L42_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+			 SNDRV_PCM_FMTBIT_S24_LE |\
+			 SNDRV_PCM_FMTBIT_S32_LE )
 
 
 static const struct snd_soc_dai_ops cs42l42_ops = {
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 9d04ed75e5c8..23b1a63315ca 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -761,7 +761,6 @@ struct  cs42l42_private {
 	struct completion pdn_done;
 	u32 sclk;
 	u32 srate;
-	u32 swidth;
 	u8 plug_state;
 	u8 hs_type;
 	u8 ts_inv;
-- 
2.30.1

[PATCH 4.19 12/56] ASoC: cs42l42: Fix mixer volume control

[Greg Kroah-Hartman]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 72d904763ae6a8576e7ad034f9da4f0e3c44bf24 ]

The minimum value is 0x3f (-63dB), which also is mute

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index a5bd9cff7085..a8ba518ba043 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -405,7 +405,7 @@ static const struct regmap_config cs42l42_regmap = {
 };
 
 static DECLARE_TLV_DB_SCALE(adc_tlv, -9600, 100, false);
-static DECLARE_TLV_DB_SCALE(mixer_tlv, -6200, 100, false);
+static DECLARE_TLV_DB_SCALE(mixer_tlv, -6300, 100, true);
 
 static const char * const cs42l42_hpf_freq_text[] = {
 	"1.86Hz", "120Hz", "235Hz", "466Hz"
@@ -462,7 +462,7 @@ static const struct snd_kcontrol_new cs42l42_snd_controls[] = {
 				CS42L42_DAC_HPF_EN_SHIFT, true, false),
 	SOC_DOUBLE_R_TLV("Mixer Volume", CS42L42_MIXER_CHA_VOL,
 			 CS42L42_MIXER_CHB_VOL, CS42L42_MIXER_CH_VOL_SHIFT,
-				0x3e, 1, mixer_tlv)
+				0x3f, 1, mixer_tlv)
 };
 
 static int cs42l42_hpdrv_evt(struct snd_soc_dapm_widget *w,
-- 
2.30.1

[PATCH 4.19 13/56] ASoC: cs42l42: Always wait at least 3ms after reset

[Greg Kroah-Hartman]

From: Lucas Tanure <tanureal@opensource.cirrus.com>

[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]

This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.

Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l42.c | 3 ++-
 sound/soc/codecs/cs42l42.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index a8ba518ba043..fddfd227a9c0 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -1800,7 +1800,7 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client,
 		dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
 		gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
 	}
-	mdelay(3);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	/* Request IRQ */
 	ret = devm_request_threaded_irq(&i2c_client->dev,
@@ -1925,6 +1925,7 @@ static int cs42l42_runtime_resume(struct device *dev)
 	}
 
 	gpiod_set_value_cansleep(cs42l42->reset_gpio, 1);
+	usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2);
 
 	regcache_cache_only(cs42l42->regmap, false);
 	regcache_sync(cs42l42->regmap);
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 23b1a63315ca..bcaf4f22408d 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -744,6 +744,7 @@
 #define CS42L42_FRAC2_VAL(val)	(((val) & 0xff0000) >> 16)
 
 #define CS42L42_NUM_SUPPLIES	5
+#define CS42L42_BOOT_TIME_US	3000
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1

[PATCH 4.19 14/56] vhost: Fix vhost_vq_reset()

[Greg Kroah-Hartman]

From: Laurent Vivier <lvivier@redhat.com>

[ Upstream commit beb691e69f4dec7bfe8b81b509848acfd1f0dbf9 ]

vhost_reset_is_le() is vhost_init_is_le(), and in the case of
cross-endian legacy, vhost_init_is_le() depends on vq->user_be.

vq->user_be is set by vhost_disable_cross_endian().

But in vhost_vq_reset(), we have:

    vhost_reset_is_le(vq);
    vhost_disable_cross_endian(vq);

And so user_be is used before being set.

To fix that, reverse the lines order as there is no other dependency
between them.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20210312140913.788592-1-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vhost.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 98b6eb902df9..732327756ee1 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -322,8 +322,8 @@ static void vhost_vq_reset(struct vhost_dev *dev,
 	vq->kick = NULL;
 	vq->call_ctx = NULL;
 	vq->log_ctx = NULL;
-	vhost_reset_is_le(vq);
 	vhost_disable_cross_endian(vq);
+	vhost_reset_is_le(vq);
 	vq->busyloop_timeout = 0;
 	vq->umem = NULL;
 	vq->iotlb = NULL;
-- 
2.30.1

[PATCH 4.19 15/56] scsi: st: Fix a use after free in st_open()

[Greg Kroah-Hartman]

From: Lv Yunlong <lyl2019@mail.ustc.edu.cn>

[ Upstream commit c8c165dea4c8f5ad67b1240861e4f6c5395fa4ac ]

In st_open(), if STp->in_use is true, STp will be freed by
scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is
better to DEBC_printk() before scsi_tape_put().

Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/st.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 307df2fa39a3..5078db7743cd 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -1265,8 +1265,8 @@ static int st_open(struct inode *inode, struct file *filp)
 	spin_lock(&st_use_lock);
 	if (STp->in_use) {
 		spin_unlock(&st_use_lock);
-		scsi_tape_put(STp);
 		DEBC_printk(STp, "Device already in use.\n");
+		scsi_tape_put(STp);
 		return (-EBUSY);
 	}
 
-- 
2.30.1

[PATCH 4.19 16/56] scsi: qla2xxx: Fix broken #endif placement

[Greg Kroah-Hartman]

From: Alexey Dobriyan <adobriyan@gmail.com>

[ Upstream commit 5999b9e5b1f8a2f5417b755130919b3ac96f5550 ]

Only half of the file is under include guard because terminating #endif
is placed too early.

Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_target.h b/drivers/scsi/qla2xxx/qla_target.h
index 199d3ba1916d..67a74720c02c 100644
--- a/drivers/scsi/qla2xxx/qla_target.h
+++ b/drivers/scsi/qla2xxx/qla_target.h
@@ -124,7 +124,6 @@
 	(min(1270, ((ql) > 0) ? (QLA_TGT_DATASEGS_PER_CMD_24XX + \
 		QLA_TGT_DATASEGS_PER_CONT_24XX*((ql) - 1)) : 0))
 #endif
-#endif
 
 #define GET_TARGET_ID(ha, iocb) ((HAS_EXTENDED_IDS(ha))			\
 			 ? le16_to_cpu((iocb)->u.isp2x.target.extended)	\
@@ -257,6 +256,7 @@ struct ctio_to_2xxx {
 #ifndef CTIO_RET_TYPE
 #define CTIO_RET_TYPE	0x17		/* CTIO return entry */
 #define ATIO_TYPE7 0x06 /* Accept target I/O entry for 24xx */
+#endif
 
 struct fcp_hdr {
 	uint8_t  r_ctl;
-- 
2.30.1

[PATCH 4.19 17/56] staging: comedi: cb_pcidas: fix request_irq() warn

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 2e5848a3d86f03024ae096478bdb892ab3d79131 ]

request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()

[    1.630764] name 'pci-das1602/16'
[    1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[    1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0
[    1.639441] Call Trace:
[    1.639976]  proc_mkdir+0x18/0x20
[    1.641946]  request_threaded_irq+0xfe/0x160
[    1.642186]  cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]

Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/comedi/drivers/cb_pcidas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 9b716c696477..86cae5d0e983 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -1281,7 +1281,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
 	     devpriv->amcc + AMCC_OP_REG_INTCSR);
 
 	ret = request_irq(pcidev->irq, cb_pcidas_interrupt, IRQF_SHARED,
-			  dev->board_name, dev);
+			  "cb_pcidas", dev);
 	if (ret) {
 		dev_dbg(dev->class_dev, "unable to allocate irq %d\n",
 			pcidev->irq);
-- 
2.30.1

[PATCH 4.19 18/56] staging: comedi: cb_pcidas64: fix request_irq() warn

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit d2d106fe3badfc3bf0dd3899d1c3f210c7203eab ]

request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()

[    1.565966] name 'pci-das6402/16'
[    1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[    1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0
[    1.574200] Call Trace:
[    1.574722]  proc_mkdir+0x18/0x20
[    1.576629]  request_threaded_irq+0xfe/0x160
[    1.576859]  auto_attach+0x60a/0xc40 [cb_pcidas64]

Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/comedi/drivers/cb_pcidas64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 631a703b345d..91403cc1bbf9 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -4021,7 +4021,7 @@ static int auto_attach(struct comedi_device *dev,
 	init_stc_registers(dev);
 
 	retval = request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
-			     dev->board_name, dev);
+			     "cb_pcidas64", dev);
 	if (retval) {
 		dev_dbg(dev->class_dev, "unable to allocate irq %u\n",
 			pcidev->irq);
-- 
2.30.1

[PATCH 4.19 19/56] ASoC: rt5659: Update MCLK rate in set_sysclk()

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]

Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.

Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5659.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/codecs/rt5659.c b/sound/soc/codecs/rt5659.c
index 1c1a521c73cb..b331b3ba61a9 100644
--- a/sound/soc/codecs/rt5659.c
+++ b/sound/soc/codecs/rt5659.c
@@ -3466,12 +3466,17 @@ static int rt5659_set_component_sysclk(struct snd_soc_component *component, int
 {
 	struct rt5659_priv *rt5659 = snd_soc_component_get_drvdata(component);
 	unsigned int reg_val = 0;
+	int ret;
 
 	if (freq == rt5659->sysclk && clk_id == rt5659->sysclk_src)
 		return 0;
 
 	switch (clk_id) {
 	case RT5659_SCLK_S_MCLK:
+		ret = clk_set_rate(rt5659->mclk, freq);
+		if (ret)
+			return ret;
+
 		reg_val |= RT5659_SCLK_SRC_MCLK;
 		break;
 	case RT5659_SCLK_S_PLL1:
-- 
2.30.1

[PATCH 4.19 20/56] thermal/core: Add NULL pointer check before using cooling device stats

[Greg Kroah-Hartman]

From: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>

[ Upstream commit 2046a24ae121cd107929655a6aaf3b8c5beea01f ]

There is a possible chance that some cooling device stats buffer
allocation fails due to very high cooling device max state value.
Later cooling device update sysfs can try to access stats data
for the same cooling device. It will lead to NULL pointer
dereference issue.

Add a NULL pointer check before accessing thermal cooling device
stats data. It fixes the following bug

[ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 27.122960] Call trace:
[ 27.122963] do_raw_spin_lock+0x18/0xe8
[ 27.122966] _raw_spin_lock+0x24/0x30
[ 27.128157] thermal_cooling_device_stats_update+0x24/0x98
[ 27.128162] cur_state_store+0x88/0xb8
[ 27.128166] dev_attr_store+0x40/0x58
[ 27.128169] sysfs_kf_write+0x50/0x68
[ 27.133358] kernfs_fop_write+0x12c/0x1c8
[ 27.133362] __vfs_write+0x54/0x160
[ 27.152297] vfs_write+0xcc/0x188
[ 27.157132] ksys_write+0x78/0x108
[ 27.162050] ksys_write+0xf8/0x108
[ 27.166968] __arm_smccc_hvc+0x158/0x4b0
[ 27.166973] __arm_smccc_hvc+0x9c/0x4b0
[ 27.186005] el0_svc+0x8/0xc

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1607367181-24589-1-git-send-email-manafm@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_sysfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index aa99edb4dff7..4dce4a8f71ed 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -770,6 +770,9 @@ void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
 {
 	struct cooling_dev_stats *stats = cdev->stats;
 
+	if (!stats)
+		return;
+
 	spin_lock(&stats->lock);
 
 	if (stats->state == new_state)
-- 
2.30.1

[PATCH 4.19 21/56] locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling

[Greg Kroah-Hartman]

From: Waiman Long <longman@redhat.com>

[ Upstream commit 5de2055d31ea88fd9ae9709ac95c372a505a60fa ]

The use_ww_ctx flag is passed to mutex_optimistic_spin(), but the
function doesn't use it. The frequent use of the (use_ww_ctx && ww_ctx)
combination is repetitive.

In fact, ww_ctx should not be used at all if !use_ww_ctx.  Simplify
ww_mutex code by dropping use_ww_ctx from mutex_optimistic_spin() an
clear ww_ctx if !use_ww_ctx. In this way, we can replace (use_ww_ctx &&
ww_ctx) by just (ww_ctx).

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210316153119.13802-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/mutex.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index 3f8a35104285..b3da782cdfbd 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -609,7 +609,7 @@ static inline int mutex_can_spin_on_owner(struct mutex *lock)
  */
 static __always_inline bool
 mutex_optimistic_spin(struct mutex *lock, struct ww_acquire_ctx *ww_ctx,
-		      const bool use_ww_ctx, struct mutex_waiter *waiter)
+		      struct mutex_waiter *waiter)
 {
 	if (!waiter) {
 		/*
@@ -685,7 +685,7 @@ fail:
 #else
 static __always_inline bool
 mutex_optimistic_spin(struct mutex *lock, struct ww_acquire_ctx *ww_ctx,
-		      const bool use_ww_ctx, struct mutex_waiter *waiter)
+		      struct mutex_waiter *waiter)
 {
 	return false;
 }
@@ -905,10 +905,13 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 	struct ww_mutex *ww;
 	int ret;
 
+	if (!use_ww_ctx)
+		ww_ctx = NULL;
+
 	might_sleep();
 
 	ww = container_of(lock, struct ww_mutex, base);
-	if (use_ww_ctx && ww_ctx) {
+	if (ww_ctx) {
 		if (unlikely(ww_ctx == READ_ONCE(ww->ctx)))
 			return -EALREADY;
 
@@ -925,10 +928,10 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 	mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);
 
 	if (__mutex_trylock(lock) ||
-	    mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, NULL)) {
+	    mutex_optimistic_spin(lock, ww_ctx, NULL)) {
 		/* got the lock, yay! */
 		lock_acquired(&lock->dep_map, ip);
-		if (use_ww_ctx && ww_ctx)
+		if (ww_ctx)
 			ww_mutex_set_context_fastpath(ww, ww_ctx);
 		preempt_enable();
 		return 0;
@@ -939,7 +942,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 	 * After waiting to acquire the wait_lock, try again.
 	 */
 	if (__mutex_trylock(lock)) {
-		if (use_ww_ctx && ww_ctx)
+		if (ww_ctx)
 			__ww_mutex_check_waiters(lock, ww_ctx);
 
 		goto skip_wait;
@@ -992,7 +995,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 			goto err;
 		}
 
-		if (use_ww_ctx && ww_ctx) {
+		if (ww_ctx) {
 			ret = __ww_mutex_check_kill(lock, &waiter, ww_ctx);
 			if (ret)
 				goto err;
@@ -1005,7 +1008,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		 * ww_mutex needs to always recheck its position since its waiter
 		 * list is not FIFO ordered.
 		 */
-		if ((use_ww_ctx && ww_ctx) || !first) {
+		if (ww_ctx || !first) {
 			first = __mutex_waiter_is_first(lock, &waiter);
 			if (first)
 				__mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);
@@ -1018,7 +1021,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		 * or we must see its unlock and acquire.
 		 */
 		if (__mutex_trylock(lock) ||
-		    (first && mutex_optimistic_spin(lock, ww_ctx, use_ww_ctx, &waiter)))
+		    (first && mutex_optimistic_spin(lock, ww_ctx, &waiter)))
 			break;
 
 		spin_lock(&lock->wait_lock);
@@ -1027,7 +1030,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 acquired:
 	__set_current_state(TASK_RUNNING);
 
-	if (use_ww_ctx && ww_ctx) {
+	if (ww_ctx) {
 		/*
 		 * Wound-Wait; we stole the lock (!first_waiter), check the
 		 * waiters as anyone might want to wound us.
@@ -1047,7 +1050,7 @@ skip_wait:
 	/* got the lock - cleanup and rejoice! */
 	lock_acquired(&lock->dep_map, ip);
 
-	if (use_ww_ctx && ww_ctx)
+	if (ww_ctx)
 		ww_mutex_lock_acquired(ww, ww_ctx);
 
 	spin_unlock(&lock->wait_lock);
-- 
2.30.1

[PATCH 4.19 22/56] ext4: do not iput inode under running transaction in ext4_rename()

[Greg Kroah-Hartman]

From: zhangyi (F) <yi.zhang@huawei.com>

[ Upstream commit 5dccdc5a1916d4266edd251f20bbbb113a5c495f ]

In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().

Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/namei.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 5f701d8dce47..358f6378882f 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -3624,14 +3624,14 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 	 */
 	retval = -ENOENT;
 	if (!old.bh || le32_to_cpu(old.de->inode) != old.inode->i_ino)
-		goto end_rename;
+		goto release_bh;
 
 	new.bh = ext4_find_entry(new.dir, &new.dentry->d_name,
 				 &new.de, &new.inlined);
 	if (IS_ERR(new.bh)) {
 		retval = PTR_ERR(new.bh);
 		new.bh = NULL;
-		goto end_rename;
+		goto release_bh;
 	}
 	if (new.bh) {
 		if (!new.inode) {
@@ -3648,15 +3648,13 @@ static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
 		handle = ext4_journal_start(old.dir, EXT4_HT_DIR, credits);
 		if (IS_ERR(handle)) {
 			retval = PTR_ERR(handle);
-			handle = NULL;
-			goto end_rename;
+			goto release_bh;
 		}
 	} else {
 		whiteout = ext4_whiteout_for_rename(&old, credits, &handle);
 		if (IS_ERR(whiteout)) {
 			retval = PTR_ERR(whiteout);
-			whiteout = NULL;
-			goto end_rename;
+			goto release_bh;
 		}
 	}
 
@@ -3764,16 +3762,18 @@ end_rename:
 			ext4_resetent(handle, &old,
 				      old.inode->i_ino, old_file_type);
 			drop_nlink(whiteout);
+			ext4_orphan_add(handle, whiteout);
 		}
 		unlock_new_inode(whiteout);
+		ext4_journal_stop(handle);
 		iput(whiteout);
-
+	} else {
+		ext4_journal_stop(handle);
 	}
+release_bh:
 	brelse(old.dir_bh);
 	brelse(old.bh);
 	brelse(new.bh);
-	if (handle)
-		ext4_journal_stop(handle);
 	return retval;
 }
 
-- 
2.30.1

[PATCH 4.19 23/56] brcmfmac: clear EAP/association status bits on linkdown events

[Greg Kroah-Hartman]

From: Luca Pesce <luca.pesce@vimar.com>

[ Upstream commit e862a3e4088070de352fdafe9bd9e3ae0a95a33c ]

This ensure that previous association attempts do not leave stale statuses
on subsequent attempts.

This fixes the WARN_ON(!cr->bss)) from __cfg80211_connect_result() when
connecting to an AP after a previous connection failure (e.g. where EAP fails
due to incorrect psk but association succeeded). In some scenarios, indeed,
brcmf_is_linkup() was reporting a link up event too early due to stale
BRCMF_VIF_STATUS_ASSOC_SUCCESS bit, thus reporting to cfg80211 a connection
result with a zeroed bssid (vif->profile.bssid is still empty), causing the
WARN_ON due to the call to cfg80211_get_bss() with the empty bssid.

Signed-off-by: Luca Pesce <luca.pesce@vimar.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608807119-21785-1-git-send-email-luca.pesce@vimar.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c    | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index bbdc6000afb9..96dc9e5ab23f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -5282,7 +5282,8 @@ static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
 	return false;
 }
 
-static bool brcmf_is_linkdown(const struct brcmf_event_msg *e)
+static bool brcmf_is_linkdown(struct brcmf_cfg80211_vif *vif,
+			    const struct brcmf_event_msg *e)
 {
 	u32 event = e->event_code;
 	u16 flags = e->flags;
@@ -5291,6 +5292,8 @@ static bool brcmf_is_linkdown(const struct brcmf_event_msg *e)
 	    (event == BRCMF_E_DISASSOC_IND) ||
 	    ((event == BRCMF_E_LINK) && (!(flags & BRCMF_EVENT_MSG_LINK)))) {
 		brcmf_dbg(CONN, "Processing link down\n");
+		clear_bit(BRCMF_VIF_STATUS_EAP_SUCCESS, &vif->sme_state);
+		clear_bit(BRCMF_VIF_STATUS_ASSOC_SUCCESS, &vif->sme_state);
 		return true;
 	}
 	return false;
@@ -5581,7 +5584,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 		} else
 			brcmf_bss_connect_done(cfg, ndev, e, true);
 		brcmf_net_setcarrier(ifp, true);
-	} else if (brcmf_is_linkdown(e)) {
+	} else if (brcmf_is_linkdown(ifp->vif, e)) {
 		brcmf_dbg(CONN, "Linkdown\n");
 		if (!brcmf_is_ibssmode(ifp->vif)) {
 			brcmf_bss_connect_done(cfg, ndev, e, false);
-- 
2.30.1

[PATCH 4.19 24/56] ath10k: hold RCU lock when calling ieee80211_find_sta_by_ifaddr()

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit 09078368d516918666a0122f2533dc73676d3d7e ]

ieee80211_find_sta_by_ifaddr() must be called under the RCU lock and
the resulting pointer is only valid under RCU lock as well.

Fix ath10k_wmi_tlv_op_pull_peer_stats_info() to hold RCU lock before it
calls ieee80211_find_sta_by_ifaddr() and release it when the resulting
pointer is no longer needed.

This problem was found while reviewing code to debug RCU warn from
ath10k_wmi_tlv_parse_peer_stats_info().

Link: https://lore.kernel.org/linux-wireless/7230c9e5-2632-b77e-c4f9-10eca557a5bb@linuxfoundation.org/
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210210212107.40373-1-skhan@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index a6f7bf28a8b2..04dc5714aa72 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -449,13 +449,13 @@ static void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TDLS_TEARDOWN_REASON_TX:
 	case WMI_TDLS_TEARDOWN_REASON_RSSI:
 	case WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT:
+		rcu_read_lock();
 		station = ieee80211_find_sta_by_ifaddr(ar->hw,
 						       ev->peer_macaddr.addr,
 						       NULL);
 		if (!station) {
 			ath10k_warn(ar, "did not find station from tdls peer event");
-			kfree(tb);
-			return;
+			goto exit;
 		}
 		arvif = ath10k_get_arvif(ar, __le32_to_cpu(ev->vdev_id));
 		ieee80211_tdls_oper_request(
@@ -466,6 +466,9 @@ static void ath10k_wmi_event_tdls_peer(struct ath10k *ar, struct sk_buff *skb)
 					);
 		break;
 	}
+
+exit:
+	rcu_read_unlock();
 	kfree(tb);
 }
 
-- 
2.30.1

[PATCH 4.19 25/56] net: ethernet: aquantia: Handle error cleanup of start on open

[Greg Kroah-Hartman]

From: Nathan Rossi <nathan.rossi@digi.com>

[ Upstream commit 8a28af7a3e85ddf358f8c41e401a33002f7a9587 ]

The aq_nic_start function can fail in a variety of cases which leaves
the device in broken state.

An example case where the start function fails is the
request_threaded_irq which can be interrupted, resulting in a EINTR
result. This can be manually triggered by bringing the link up (e.g. ip
link set up) and triggering a SIGINT on the initiating process (e.g.
Ctrl+C). This would put the device into a half configured state.
Subsequently bringing the link up again would cause the napi_enable to
BUG.

In order to correctly clean up the failed attempt to start a device call
aq_nic_stop.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index e3ae29e523f0..daf841ae337d 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -50,8 +50,10 @@ static int aq_ndev_open(struct net_device *ndev)
 	if (err < 0)
 		goto err_exit;
 	err = aq_nic_start(aq_nic);
-	if (err < 0)
+	if (err < 0) {
+		aq_nic_stop(aq_nic);
 		goto err_exit;
+	}
 
 err_exit:
 	if (err < 0)
-- 
2.30.1

[PATCH 4.19 26/56] appletalk: Fix skb allocation size in loopback case

[Greg Kroah-Hartman]

From: Doug Brown <doug@schmorgal.com>

[ Upstream commit 39935dccb21c60f9bbf1bb72d22ab6fd14ae7705 ]

If a DDP broadcast packet is sent out to a non-gateway target, it is
also looped back. There is a potential for the loopback device to have a
longer hardware header length than the original target route's device,
which can result in the skb not being created with enough room for the
loopback device's hardware header. This patch fixes the issue by
determining that a loopback will be necessary prior to allocating the
skb, and if so, ensuring the skb has enough room.

This was discovered while testing a new driver that creates a LocalTalk
network interface (LTALK_HLEN = 1). It caused an skb_under_panic.

Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/appletalk/ddp.c | 33 +++++++++++++++++++++------------
 1 file changed, 21 insertions(+), 12 deletions(-)

diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index 2880ac470379..20ec8e7f9423 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1573,8 +1573,8 @@ static int atalk_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	struct sk_buff *skb;
 	struct net_device *dev;
 	struct ddpehdr *ddp;
-	int size;
-	struct atalk_route *rt;
+	int size, hard_header_len;
+	struct atalk_route *rt, *rt_lo = NULL;
 	int err;
 
 	if (flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT))
@@ -1637,7 +1637,22 @@ static int atalk_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 	SOCK_DEBUG(sk, "SK %p: Size needed %d, device %s\n",
 			sk, size, dev->name);
 
-	size += dev->hard_header_len;
+	hard_header_len = dev->hard_header_len;
+	/* Leave room for loopback hardware header if necessary */
+	if (usat->sat_addr.s_node == ATADDR_BCAST &&
+	    (dev->flags & IFF_LOOPBACK || !(rt->flags & RTF_GATEWAY))) {
+		struct atalk_addr at_lo;
+
+		at_lo.s_node = 0;
+		at_lo.s_net  = 0;
+
+		rt_lo = atrtr_find(&at_lo);
+
+		if (rt_lo && rt_lo->dev->hard_header_len > hard_header_len)
+			hard_header_len = rt_lo->dev->hard_header_len;
+	}
+
+	size += hard_header_len;
 	release_sock(sk);
 	skb = sock_alloc_send_skb(sk, size, (flags & MSG_DONTWAIT), &err);
 	lock_sock(sk);
@@ -1645,7 +1660,7 @@ static int atalk_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 		goto out;
 
 	skb_reserve(skb, ddp_dl->header_length);
-	skb_reserve(skb, dev->hard_header_len);
+	skb_reserve(skb, hard_header_len);
 	skb->dev = dev;
 
 	SOCK_DEBUG(sk, "SK %p: Begin build.\n", sk);
@@ -1696,18 +1711,12 @@ static int atalk_sendmsg(struct socket *sock, struct msghdr *msg, size_t len)
 		/* loop back */
 		skb_orphan(skb);
 		if (ddp->deh_dnode == ATADDR_BCAST) {
-			struct atalk_addr at_lo;
-
-			at_lo.s_node = 0;
-			at_lo.s_net  = 0;
-
-			rt = atrtr_find(&at_lo);
-			if (!rt) {
+			if (!rt_lo) {
 				kfree_skb(skb);
 				err = -ENETUNREACH;
 				goto out;
 			}
-			dev = rt->dev;
+			dev = rt_lo->dev;
 			skb->dev = dev;
 		}
 		ddp_dl->request(ddp_dl, skb, dev->dev_addr);
-- 
2.30.1

[PATCH 4.19 27/56] net: wan/lmc: unregister device when no matching device is found

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

[ Upstream commit 62e69bc419772638369eff8ff81340bde8aceb61 ]

lmc set sc->lmc_media pointer when there is a matching device.
However, when no matching device is found, this pointer is NULL
and the following dereference will result in a null-ptr-deref.

To fix this issue, unregister the hdlc device and return an error.

[    4.569359] BUG: KASAN: null-ptr-deref in lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.569748] Read of size 8 at addr 0000000000000008 by task modprobe/95
[    4.570102]
[    4.570187] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7 #94
[    4.570527] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-preb4
[    4.571125] Call Trace:
[    4.571261]  dump_stack+0x7d/0xa3
[    4.571445]  kasan_report.cold+0x10c/0x10e
[    4.571667]  ? lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.571932]  lmc_init_one.cold+0x2b6/0x55d [lmc]
[    4.572186]  ? lmc_mii_readreg+0xa0/0xa0 [lmc]
[    4.572432]  local_pci_probe+0x6f/0xb0
[    4.572639]  pci_device_probe+0x171/0x240
[    4.572857]  ? pci_device_remove+0xe0/0xe0
[    4.573080]  ? kernfs_create_link+0xb6/0x110
[    4.573315]  ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[    4.573598]  really_probe+0x161/0x420
[    4.573799]  driver_probe_device+0x6d/0xd0
[    4.574022]  device_driver_attach+0x82/0x90
[    4.574249]  ? device_driver_attach+0x90/0x90
[    4.574485]  __driver_attach+0x60/0x100
[    4.574694]  ? device_driver_attach+0x90/0x90
[    4.574931]  bus_for_each_dev+0xe1/0x140
[    4.575146]  ? subsys_dev_iter_exit+0x10/0x10
[    4.575387]  ? klist_node_init+0x61/0x80
[    4.575602]  bus_add_driver+0x254/0x2a0
[    4.575812]  driver_register+0xd3/0x150
[    4.576021]  ? 0xffffffffc0018000
[    4.576202]  do_one_initcall+0x84/0x250
[    4.576411]  ? trace_event_raw_event_initcall_finish+0x150/0x150
[    4.576733]  ? unpoison_range+0xf/0x30
[    4.576938]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.577219]  ? unpoison_range+0xf/0x30
[    4.577423]  ? unpoison_range+0xf/0x30
[    4.577628]  do_init_module+0xf8/0x350
[    4.577833]  load_module+0x3fe6/0x4340
[    4.578038]  ? vm_unmap_ram+0x1d0/0x1d0
[    4.578247]  ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[    4.578526]  ? module_frob_arch_sections+0x20/0x20
[    4.578787]  ? __do_sys_finit_module+0x108/0x170
[    4.579037]  __do_sys_finit_module+0x108/0x170
[    4.579278]  ? __ia32_sys_init_module+0x40/0x40
[    4.579523]  ? file_open_root+0x200/0x200
[    4.579742]  ? do_sys_open+0x85/0xe0
[    4.579938]  ? filp_open+0x50/0x50
[    4.580125]  ? exit_to_user_mode_prepare+0xfc/0x130
[    4.580390]  do_syscall_64+0x33/0x40
[    4.580586]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    4.580859] RIP: 0033:0x7f1a724c3cf7
[    4.581054] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 48 891
[    4.582043] RSP: 002b:00007fff44941c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    4.582447] RAX: ffffffffffffffda RBX: 00000000012ada70 RCX: 00007f1a724c3cf7
[    4.582827] RDX: 0000000000000000 RSI: 00000000012ac9e0 RDI: 0000000000000003
[    4.583207] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[    4.583587] R10: 00007f1a72527300 R11: 0000000000000246 R12: 00000000012ac9e0
[    4.583968] R13: 0000000000000000 R14: 00000000012acc90 R15: 0000000000000001
[    4.584349] ==================================================================

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lmc/lmc_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 4907453f17f5..937f56d0a31d 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -915,6 +915,8 @@ static int lmc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         break;
     default:
 	printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
+	unregister_hdlc_device(dev);
+	return -EIO;
         break;
     }
 
-- 
2.30.1

[PATCH 4.19 28/56] bpf: Remove MTU check in __bpf_skb_max_len

[Greg Kroah-Hartman]

From: Jesper Dangaard Brouer <brouer@redhat.com>

commit 6306c1189e77a513bf02720450bb43bd4ba5d8ae upstream.

Multiple BPF-helpers that can manipulate/increase the size of the SKB uses
__bpf_skb_max_len() as the max-length. This function limit size against
the current net_device MTU (skb->dev->mtu).

When a BPF-prog grow the packet size, then it should not be limited to the
MTU. The MTU is a transmit limitation, and software receiving this packet
should be allowed to increase the size. Further more, current MTU check in
__bpf_skb_max_len uses the MTU from ingress/current net_device, which in
case of redirects uses the wrong net_device.

This patch keeps a sanity max limit of SKB_MAX_ALLOC (16KiB). The real limit
is elsewhere in the system. Jesper's testing[1] showed it was not possible
to exceed 8KiB when expanding the SKB size via BPF-helper. The limiting
factor is the define KMALLOC_MAX_CACHE_SIZE which is 8192 for
SLUB-allocator (CONFIG_SLUB) in-case PAGE_SIZE is 4096. This define is
in-effect due to this being called from softirq context see code
__gfp_pfmemalloc_flags() and __do_kmalloc_node(). Jakub's testing showed
that frames above 16KiB can cause NICs to reset (but not crash). Keep this
sanity limit at this level as memory layer can differ based on kernel
config.

[1] https://github.com/xdp-project/bpf-examples/tree/master/MTU-tests

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/161287788936.790810.2937823995775097177.stgit@firesoul
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/filter.c |   12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -2836,18 +2836,14 @@ static int bpf_skb_net_shrink(struct sk_
 	return 0;
 }
 
-static u32 __bpf_skb_max_len(const struct sk_buff *skb)
-{
-	return skb->dev ? skb->dev->mtu + skb->dev->hard_header_len :
-			  SKB_MAX_ALLOC;
-}
+#define BPF_SKB_MAX_LEN SKB_MAX_ALLOC
 
 static int bpf_skb_adjust_net(struct sk_buff *skb, s32 len_diff)
 {
 	bool trans_same = skb->transport_header == skb->network_header;
 	u32 len_cur, len_diff_abs = abs(len_diff);
 	u32 len_min = bpf_skb_net_base_len(skb);
-	u32 len_max = __bpf_skb_max_len(skb);
+	u32 len_max = BPF_SKB_MAX_LEN;
 	__be16 proto = skb_protocol(skb, true);
 	bool shrink = len_diff < 0;
 	int ret;
@@ -2926,7 +2922,7 @@ static int bpf_skb_trim_rcsum(struct sk_
 static inline int __bpf_skb_change_tail(struct sk_buff *skb, u32 new_len,
 					u64 flags)
 {
-	u32 max_len = __bpf_skb_max_len(skb);
+	u32 max_len = BPF_SKB_MAX_LEN;
 	u32 min_len = __bpf_skb_min_len(skb);
 	int ret;
 
@@ -3002,7 +2998,7 @@ static const struct bpf_func_proto sk_sk
 static inline int __bpf_skb_change_head(struct sk_buff *skb, u32 head_room,
 					u64 flags)
 {
-	u32 max_len = __bpf_skb_max_len(skb);
+	u32 max_len = BPF_SKB_MAX_LEN;
 	u32 new_len = skb->len + head_room;
 	int ret;
 

[PATCH 4.19 29/56] ALSA: usb-audio: Apply sample rate quirk to Logitech Connect

[Greg Kroah-Hartman]

From: Ikjoon Jang <ikjn@chromium.org>

commit 625bd5a616ceda4840cd28f82e957c8ced394b6a upstream.

Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.

This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/quirks.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1187,6 +1187,7 @@ bool snd_usb_get_sample_rate_quirk(struc
 	case USB_ID(0x21B4, 0x0081): /* AudioQuest DragonFly */
 	case USB_ID(0x2912, 0x30c8): /* Audioengine D1 */
 	case USB_ID(0x413c, 0xa506): /* Dell AE515 sound bar */
+	case USB_ID(0x046d, 0x084c): /* Logitech ConferenceCam Connect */
 		return true;
 	}
 

[PATCH 4.19 30/56] ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit febf22565549ea7111e7d45e8f2d64373cc66b11 upstream.

We found a recording issue on a Dell AIO, users plug a headset-mic and
select headset-mic from UI, but can't record any sound from
headset-mic. The root cause is the determine_headset_type() returns a
wrong type, e.g. users plug a ctia type headset, but that function
returns omtp type.

On this machine, the internal mic is not connected to the codec, the
"Input Source" is headset mic by default. And when users plug a
headset, the determine_headset_type() will be called immediately, the
codec on this AIO is alc274, the delay time for this codec in the
determine_headset_type() is only 80ms, the delay is too short to
correctly determine the headset type, the fail rate is nearly 99% when
users plug the headset with the normal speed.

Other codecs set several hundred ms delay time, so here I change the
delay time to 850ms for alc2x4 series, after this change, the fail
rate is zero unless users plug the headset slowly on purpose.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4870,7 +4870,7 @@ static void alc_determine_headset_type(s
 	case 0x10ec0274:
 	case 0x10ec0294:
 		alc_process_coef_fw(codec, coef0274);
-		msleep(80);
+		msleep(850);
 		val = alc_read_coef_idx(codec, 0x46);
 		is_ctia = (val & 0x00f0) == 0x00f0;
 		break;

[PATCH 4.19 31/56] ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit e54f30befa7990b897189b44a56c1138c6bfdbb5 upstream.

We found the alc_update_headset_mode() is not called on some machines
when unplugging the headset, as a result, the mode of the
ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type
is not cleared, if users plug a differnt type of headset next time,
the determine_headset_type() will not be called and the audio jack is
set to the headset type of previous time.

On the Dell machines which connect the dmic to the PCH, if we open
the gnome-sound-setting and unplug the headset, this issue will
happen. Those machines disable the auto-mute by ucm and has no
internal mic in the input source, so the update_headset_mode() will
not be called by cap_sync_hook or automute_hook when unplugging, and
because the gnome-sound-setting is opened, the codec will not enter
the runtime_suspend state, so the update_headset_mode() will not be
called by alc_resume when unplugging. In this case the
hp_automute_hook is called when unplugging, so add
update_headset_mode() calling to this function.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5054,6 +5054,7 @@ static void alc_update_headset_jack_cb(s
 	struct alc_spec *spec = codec->spec;
 	spec->current_headset_type = ALC_HEADSET_TYPE_UNKNOWN;
 	snd_hda_gen_hp_automute(codec, jack);
+	alc_update_headset_mode(codec);
 }
 
 static void alc_probe_headset_mode(struct hda_codec *codec)

[PATCH 4.19 32/56] PM: runtime: Fix race getting/putting suppliers at probe

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit 9dfacc54a8661bc8be6e08cffee59596ec59f263 upstream.

pm_runtime_put_suppliers() must not decrement rpm_active unless the
consumer is suspended. That is because, otherwise, it could suspend
suppliers for an active consumer.

That can happen as follows:

 static int driver_probe_device(struct device_driver *drv, struct device *dev)
 {
	int ret = 0;

	if (!device_is_registered(dev))
		return -ENODEV;

	dev->can_match = true;
	pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
		 drv->bus->name, __func__, dev_name(dev), drv->name);

	pm_runtime_get_suppliers(dev);
	if (dev->parent)
		pm_runtime_get_sync(dev->parent);

 At this point, dev can runtime suspend so rpm_put_suppliers() can run,
 rpm_active becomes 1 (the lowest value).

	pm_runtime_barrier(dev);
	if (initcall_debug)
		ret = really_probe_debug(dev, drv);
	else
		ret = really_probe(dev, drv);

 Probe callback can have runtime resumed dev, and then runtime put
 so dev is awaiting autosuspend, but rpm_active is 2.

	pm_request_idle(dev);

	if (dev->parent)
		pm_runtime_put(dev->parent);

	pm_runtime_put_suppliers(dev);

 Now pm_runtime_put_suppliers() will put the supplier
 i.e. rpm_active 2 -> 1, but consumer can still be active.

	return ret;
 }

Fix by checking the runtime status. For any status other than
RPM_SUSPENDED, rpm_active can be considered to be "owned" by
rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing.

Reported-by: Asutosh Das <asutoshd@codeaurora.org>
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/power/runtime.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1586,6 +1586,8 @@ void pm_runtime_get_suppliers(struct dev
 void pm_runtime_put_suppliers(struct device *dev)
 {
 	struct device_link *link;
+	unsigned long flags;
+	bool put;
 	int idx;
 
 	idx = device_links_read_lock();
@@ -1593,7 +1595,11 @@ void pm_runtime_put_suppliers(struct dev
 	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
 		if (link->supplier_preactivated) {
 			link->supplier_preactivated = false;
-			if (refcount_dec_not_one(&link->rpm_active))
+			spin_lock_irqsave(&dev->power.lock, flags);
+			put = pm_runtime_status_suspended(dev) &&
+			      refcount_dec_not_one(&link->rpm_active);
+			spin_unlock_irqrestore(&dev->power.lock, flags);
+			if (put)
 				pm_runtime_put(link->supplier);
 		}
 

[PATCH 4.19 33/56] PM: runtime: Fix ordering in pm_runtime_get_suppliers()

[Greg Kroah-Hartman]

From: Adrian Hunter <adrian.hunter@intel.com>

commit c0c33442f7203704aef345647e14c2fb86071001 upstream.

rpm_active indicates how many times the supplier usage_count has been
incremented. Consequently it must be updated after pm_runtime_get_sync() of
the supplier, not before.

Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/base/power/runtime.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1572,8 +1572,8 @@ void pm_runtime_get_suppliers(struct dev
 	list_for_each_entry_rcu(link, &dev->links.suppliers, c_node)
 		if (link->flags & DL_FLAG_PM_RUNTIME) {
 			link->supplier_preactivated = true;
-			refcount_inc(&link->rpm_active);
 			pm_runtime_get_sync(link->supplier);
+			refcount_inc(&link->rpm_active);
 		}
 
 	device_links_read_unlock(idx);

[PATCH 4.19 34/56] tracing: Fix stack trace event size

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 9deb193af69d3fd6dd8e47f292b67c805a787010 upstream.

Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace
event so that user space could parse it properly. Originally the stack
trace format to user space showed that the called stack was a dynamic
array. But it is not actually a dynamic array, in the way that other
dynamic event arrays worked, and this broke user space parsing for it. The
update was to make the array look to have 8 entries in it. Helper
functions were added to make it parse it correctly, as the stack was
dynamic, but was determined by the size of the event stored.

Although this fixed user space on how it read the event, it changed the
internal structure used for the stack trace event. It changed the array
size from [0] to [8] (added 8 entries). This increased the size of the
stack trace event by 8 words. The size reserved on the ring buffer was the
size of the stack trace event plus the number of stack entries found in
the stack trace. That commit caused the amount to be 8 more than what was
needed because it did not expect the caller field to have any size. This
produced 8 entries of garbage (and reading random data) from the stack
trace event:

          <idle>-0       [002] d... 1976396.837549: <stack trace>
 => trace_event_raw_event_sched_switch
 => __traceiter_sched_switch
 => __schedule
 => schedule_idle
 => do_idle
 => cpu_startup_entry
 => secondary_startup_64_no_verify
 => 0xc8c5e150ffff93de
 => 0xffff93de
 => 0
 => 0
 => 0xc8c5e17800000000
 => 0x1f30affff93de
 => 0x00000004
 => 0x200000000

Instead, subtract the size of the caller field from the size of the event
to make sure that only the amount needed to store the stack trace is
reserved.

Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/

Cc: stable@vger.kernel.org
Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Tested-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2645,7 +2645,8 @@ static void __ftrace_trace_stack(struct
 	size *= sizeof(unsigned long);
 
 	event = __trace_buffer_lock_reserve(buffer, TRACE_STACK,
-					    sizeof(*entry) + size, flags, pc);
+				    (sizeof(*entry) - sizeof(entry->caller)) + size,
+				    flags, pc);
 	if (!event)
 		goto out;
 	entry = ring_buffer_event_data(event);

[PATCH 4.19 35/56] mm: fix race by making init_zero_pfn() early_initcall

[Greg Kroah-Hartman]

From: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>

commit e720e7d0e983bf05de80b231bccc39f1487f0f16 upstream.

There are code paths that rely on zero_pfn to be fully initialized
before core_initcall.  For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput.  If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:

  BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1

Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:

  1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
       kobject_uevent_env+0x7e4/0x7ec
       kset_register+0x68/0x88
       bus_register+0xdc/0x34c
       subsys_virtual_register+0x34/0x78
       wq_sysfs_init+0x1c/0x4c
       do_one_initcall+0x50/0x1a8
       kernel_init_freeable+0x230/0x2c8
       kernel_init+0x10/0x100
       ret_from_kernel_thread+0x14/0x1c

  2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
     kernel_execve asynchronously.

  3. Memory allocations in kernel_execve cause a page fault, bumping the
     MM reference counter:
       add_mm_counter_fast+0xb4/0xc0
       handle_mm_fault+0x6e4/0xea0
       __get_user_pages.part.78+0x190/0x37c
       __get_user_pages_remote+0x128/0x360
       get_arg_page+0x34/0xa0
       copy_string_kernel+0x194/0x2a4
       kernel_execve+0x11c/0x298
       call_usermodehelper_exec_async+0x114/0x194

  4. In case zero_pfn has not been initialized yet, zap_pte_range does
     not decrement the MM_ANONPAGES RSS counter and the BUG message is
     triggered shortly afterwards when __mmdrop checks the ref counters:
       __mmdrop+0x98/0x1d0
       free_bprm+0x44/0x118
       kernel_execve+0x160/0x1d8
       call_usermodehelper_exec_async+0x114/0x194
       ret_from_kernel_thread+0x14/0x1c

To avoid races such as described above, initialize init_zero_pfn at
early_initcall level.  Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.

Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/memory.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/memory.c
+++ b/mm/memory.c
@@ -148,7 +148,7 @@ static int __init init_zero_pfn(void)
 	zero_pfn = page_to_pfn(ZERO_PAGE(0));
 	return 0;
 }
-core_initcall(init_zero_pfn);
+early_initcall(init_zero_pfn);
 
 
 #if defined(SPLIT_RSS_COUNTING)

[PATCH 4.19 36/56] drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()

[Greg Kroah-Hartman]

From: Nirmoy Das <nirmoy.das@amd.com>

commit 5e61b84f9d3ddfba73091f9fbc940caae1c9eb22 upstream.

Offset calculation wasn't correct as start addresses are in pfn
not in bytes.

CC: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -2286,7 +2286,7 @@ int amdgpu_vm_bo_clear_mappings(struct a
 			after->start = eaddr + 1;
 			after->last = tmp->last;
 			after->offset = tmp->offset;
-			after->offset += after->start - tmp->start;
+			after->offset += (after->start - tmp->start) << PAGE_SHIFT;
 			after->flags = tmp->flags;
 			after->bo_va = tmp->bo_va;
 			list_add(&after->list, &tmp->bo_va->invalids);

[PATCH 4.19 37/56] drm/amdgpu: check alignment on CPU page for bo map

[Greg Kroah-Hartman]

From: Xℹ Ruoyao <xry111@mengyan1223.wang>

commit e3512fb67093fabdf27af303066627b921ee9bd8 upstream.

The page table of AMDGPU requires an alignment to CPU page so we should
check ioctl parameters for it.  Return -EINVAL if some parameter is
unaligned to CPU page, instead of corrupt the page table sliently.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Xi Ruoyao <xry111@mengyan1223.wang>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -2076,8 +2076,8 @@ int amdgpu_vm_bo_map(struct amdgpu_devic
 	uint64_t eaddr;
 
 	/* validate the parameters */
-	if (saddr & AMDGPU_GPU_PAGE_MASK || offset & AMDGPU_GPU_PAGE_MASK ||
-	    size == 0 || size & AMDGPU_GPU_PAGE_MASK)
+	if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK ||
+	    size == 0 || size & ~PAGE_MASK)
 		return -EINVAL;
 
 	/* make sure object fit at this offset */
@@ -2141,8 +2141,8 @@ int amdgpu_vm_bo_replace_map(struct amdg
 	int r;
 
 	/* validate the parameters */
-	if (saddr & AMDGPU_GPU_PAGE_MASK || offset & AMDGPU_GPU_PAGE_MASK ||
-	    size == 0 || size & AMDGPU_GPU_PAGE_MASK)
+	if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK ||
+	    size == 0 || size & ~PAGE_MASK)
 		return -EINVAL;
 
 	/* make sure object fit at this offset */

[PATCH 4.19 38/56] reiserfs: update reiserfs_xattrs_initialized() condition

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>

commit 5e46d1b78a03d52306f21f77a4e4a144b6d31486 upstream.

syzbot is reporting NULL pointer dereference at reiserfs_security_init()
[1], for commit ab17c4f02156c4f7 ("reiserfs: fixup xattr_root caching")
is assuming that REISERFS_SB(s)->xattr_root != NULL in
reiserfs_xattr_jcreate_nblocks() despite that commit made
REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL
case possible.

I guess that commit 6cb4aff0a77cc0e6 ("reiserfs: fix oops while creating
privroot with selinux enabled") wanted to check xattr_root != NULL
before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking
about the xattr root.

  The issue is that while creating the privroot during mount
  reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which
  dereferences the xattr root. The xattr root doesn't exist, so we get
  an oops.

Therefore, update reiserfs_xattrs_initialized() to check both the
privroot and the xattr root.

Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1]
Reported-and-tested-by: syzbot <syzbot+690cb1e51970435f9775@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6cb4aff0a77c ("reiserfs: fix oops while creating privroot with selinux enabled")
Acked-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/reiserfs/xattr.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/reiserfs/xattr.h
+++ b/fs/reiserfs/xattr.h
@@ -43,7 +43,7 @@ void reiserfs_security_free(struct reise
 
 static inline int reiserfs_xattrs_initialized(struct super_block *sb)
 {
-	return REISERFS_SB(sb)->priv_root != NULL;
+	return REISERFS_SB(sb)->priv_root && REISERFS_SB(sb)->xattr_root;
 }
 
 #define xattr_size(size) ((size) + sizeof(struct reiserfs_xattr_header))

[PATCH 4.19 39/56] pinctrl: rockchip: fix restore error in resume

[Greg Kroah-Hartman]

From: Wang Panzhenzhuan <randy.wang@rock-chips.com>

commit c971af25cda94afe71617790826a86253e88eab0 upstream.

The restore in resume should match to suspend which only set for RK3288
SoCs pinctrl.

Fixes: 8dca933127024 ("pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume")
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wang Panzhenzhuan <randy.wang@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20210223100725.269240-1-jay.xu@rock-chips.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/pinctrl/pinctrl-rockchip.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -3353,12 +3353,15 @@ static int __maybe_unused rockchip_pinct
 static int __maybe_unused rockchip_pinctrl_resume(struct device *dev)
 {
 	struct rockchip_pinctrl *info = dev_get_drvdata(dev);
-	int ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
-			       rk3288_grf_gpio6c_iomux |
-			       GPIO6C6_SEL_WRITE_ENABLE);
+	int ret;
 
-	if (ret)
-		return ret;
+	if (info->ctrl->type == RK3288) {
+		ret = regmap_write(info->regmap_base, RK3288_GRF_GPIO6C_IOMUX,
+				   rk3288_grf_gpio6c_iomux |
+				   GPIO6C6_SEL_WRITE_ENABLE);
+		if (ret)
+			return ret;
+	}
 
 	return pinctrl_force_default(info->pctl_dev);
 }

[PATCH 4.19 40/56] extcon: Add stubs for extcon_register_notifier_all() functions

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit c9570d4a5efd04479b3cd09c39b571eb031d94f4 ]

Add stubs for extcon_register_notifier_all() function for !CONFIG_EXTCON
case.  This is useful for compile testing and for drivers which use
EXTCON but do not require it (therefore do not depend on CONFIG_EXTCON).

Fixes: 815429b39d94 ("extcon: Add new extcon_register_notifier_all() to monitor all external connectors")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/extcon.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 7f033b1ea568..fdef4c784d03 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -279,6 +279,29 @@ static inline  void devm_extcon_unregister_notifier(struct device *dev,
 				struct extcon_dev *edev, unsigned int id,
 				struct notifier_block *nb) { }
 
+static inline int extcon_register_notifier_all(struct extcon_dev *edev,
+					       struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int extcon_unregister_notifier_all(struct extcon_dev *edev,
+						 struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline int devm_extcon_register_notifier_all(struct device *dev,
+						    struct extcon_dev *edev,
+						    struct notifier_block *nb)
+{
+	return 0;
+}
+
+static inline void devm_extcon_unregister_notifier_all(struct device *dev,
+						       struct extcon_dev *edev,
+						       struct notifier_block *nb) { }
+
 static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
 	return ERR_PTR(-ENODEV);
-- 
2.30.2

[PATCH 4.19 41/56] extcon: Fix error handling in extcon_dev_register

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ]

When devm_kcalloc() fails, we should execute device_unregister()
to unregister edev->dev from system.

Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index b9d27c8fe57e..e70f21ae85ff 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -1256,6 +1256,7 @@ int extcon_dev_register(struct extcon_dev *edev)
 				sizeof(*edev->nh), GFP_KERNEL);
 	if (!edev->nh) {
 		ret = -ENOMEM;
+		device_unregister(&edev->dev);
 		goto err_dev;
 	}
 
-- 
2.30.2

[PATCH 4.19 42/56] firewire: nosy: Fix a use-after-free bug in nosy_ioctl()

[Greg Kroah-Hartman]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 829933ef05a951c8ff140e814656d73e74915faf ]

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

 1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added to
    doubly linked list.
 2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added to
    doubly linked list.
 3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
 4. Close the first nosy device and nosy_release will be called. In
    nosy_release, client A will be unlinked and freed.
 5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.

Fix this bug by adding a check before inserting a client.  If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

   BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
   Write of size 8 at addr ffff888102ad7360 by task poc
   CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
   Call Trace:
     nosy_release+0x1ea/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Allocated by task 337:
     nosy_open+0x154/0x4d0
     misc_open+0x2ec/0x410
     chrdev_open+0x20d/0x5a0
     do_dentry_open+0x40f/0xe80
     path_openat+0x1cf9/0x37b0
     do_filp_open+0x16d/0x390
     do_sys_openat2+0x11d/0x360
     __x64_sys_open+0xfd/0x1a0
     do_syscall_64+0x33/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   Freed by task 337:
     kfree+0x8f/0x210
     nosy_release+0x158/0x210
     __fput+0x1e2/0x840
     task_work_run+0xe8/0x180
     exit_to_user_mode_prepare+0x114/0x120
     syscall_exit_to_user_mode+0x1d/0x40
     entry_SYSCALL_64_after_hwframe+0x44/0xae

   The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
   The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)

[ Modified to use 'list_empty()' inside proper lock  - Linus ]

Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firewire/nosy.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index a128dd1126ae..ac85e03e88e1 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -359,6 +359,7 @@ nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	struct client *client = file->private_data;
 	spinlock_t *client_list_lock = &client->lynx->client_list_lock;
 	struct nosy_stats stats;
+	int ret;
 
 	switch (cmd) {
 	case NOSY_IOC_GET_STATS:
@@ -373,11 +374,15 @@ nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			return 0;
 
 	case NOSY_IOC_START:
+		ret = -EBUSY;
 		spin_lock_irq(client_list_lock);
-		list_add_tail(&client->link, &client->lynx->client_list);
+		if (list_empty(&client->link)) {
+			list_add_tail(&client->link, &client->lynx->client_list);
+			ret = 0;
+		}
 		spin_unlock_irq(client_list_lock);
 
-		return 0;
+		return ret;
 
 	case NOSY_IOC_STOP:
 		spin_lock_irq(client_list_lock);
-- 
2.30.2

[PATCH 4.19 43/56] usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

commit 1cc5ed25bdade86de2650a82b2730108a76de20c upstream.

Fix shift out-of-bounds in vhci_hub_control() SetPortFeature handling.

UBSAN: shift-out-of-bounds in drivers/usb/usbip/vhci_hcd.c:605:42
shift exponent 768 is too large for 32-bit type 'int'

Reported-by: syzbot+3dea30b047f41084de66@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210324230654.34798-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/usbip/vhci_hcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -594,6 +594,8 @@ static int vhci_hub_control(struct usb_h
 				pr_err("invalid port number %d\n", wIndex);
 				goto error;
 			}
+			if (wValue >= 32)
+				goto error;
 			if (hcd->speed == HCD_USB3) {
 				if ((vhci_hcd->port_status[rhport] &
 				     USB_SS_PORT_STAT_POWER) != 0) {

[PATCH 4.19 44/56] USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem

[Greg Kroah-Hartman]

From: Vincent Palatin <vpalatin@chromium.org>

commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd upstream.

This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).

Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -498,6 +498,10 @@ static const struct usb_device_id usb_qu
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Fibocom L850-GL LTE Modem */
+	{ USB_DEVICE(0x2cb7, 0x0007), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 

[PATCH 4.19 45/56] usb: musb: Fix suspend with devices connected for a64

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

commit 92af4fc6ec331228aca322ca37c8aea7b150a151 upstream.

Pinephone running on Allwinner A64 fails to suspend with USB devices
connected as reported by Bhushan Shah <bshah@kde.org>. Reverting
commit 5fbf7a253470 ("usb: musb: fix idling for suspend after
disconnect interrupt") fixes the issue.

Let's add suspend checks also for suspend after disconnect interrupt
quirk handling like we already do elsewhere.

Fixes: 5fbf7a253470 ("usb: musb: fix idling for suspend after disconnect interrupt")
Reported-by: Bhushan Shah <bshah@kde.org>
Tested-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210324071142.42264-1-tony@atomide.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_core.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1868,10 +1868,14 @@ static void musb_pm_runtime_check_sessio
 		MUSB_DEVCTL_HR;
 	switch (devctl & ~s) {
 	case MUSB_QUIRK_B_DISCONNECT_99:
-		musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n");
-		schedule_delayed_work(&musb->irq_work,
-				      msecs_to_jiffies(1000));
-		break;
+		if (musb->quirk_retries && !musb->flush_irq_work) {
+			musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n");
+			schedule_delayed_work(&musb->irq_work,
+					      msecs_to_jiffies(1000));
+			musb->quirk_retries--;
+			break;
+		}
+		/* fall through */
 	case MUSB_QUIRK_B_INVALID_VBUS_91:
 		if (musb->quirk_retries && !musb->flush_irq_work) {
 			musb_dbg(musb,

[PATCH 4.19 46/56] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

[Greg Kroah-Hartman]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

commit 6f978a30c9bb12dab1302d0f06951ee290f5e600 upstream.

The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1616482975-17841-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-mtk.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -395,6 +395,13 @@ static void xhci_mtk_quirks(struct devic
 	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 	if (mtk->lpm_support)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	/*
+	 * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
+	 * and it's 3 when support it.
+	 */
+	if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
 }
 
 /* called during probe() after chip reset completes */
@@ -551,7 +558,8 @@ static int xhci_mtk_probe(struct platfor
 	if (ret)
 		goto put_usb3_hcd;
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
 		xhci->shared_hcd->can_do_streams = 1;
 
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);

[PATCH 4.19 47/56] cdc-acm: fix BREAK rx code path adding necessary calls

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 08dff274edda54310d6f1cf27b62fddf0f8d146e upstream.

Counting break events is nice but we should actually report them to
the tty layer.

Fixes: 5a6a62bdb9257 ("cdc-acm: add TIOCMIWAIT")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20210311133714.31881-1-oneukum@suse.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -312,8 +312,10 @@ static void acm_process_notification(str
 			acm->iocount.dsr++;
 		if (difference & ACM_CTRL_DCD)
 			acm->iocount.dcd++;
-		if (newctrl & ACM_CTRL_BRK)
+		if (newctrl & ACM_CTRL_BRK) {
 			acm->iocount.brk++;
+			tty_insert_flip_char(&acm->port, 0, TTY_BREAK);
+		}
 		if (newctrl & ACM_CTRL_RI)
 			acm->iocount.rng++;
 		if (newctrl & ACM_CTRL_FRAMING)

[PATCH 4.19 48/56] USB: cdc-acm: untangle a circular dependency between callback and softint

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit 6069e3e927c8fb3a1947b07d1a561644ea960248 upstream.

We have a cycle of callbacks scheduling works which submit
URBs with thos callbacks. This needs to be blocked, stopped
and unblocked to untangle the circle.

The issue leads to faults like:

[   55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03
[   55.075624] pgd = be866494
[   55.078335] [6b6b6c03] *pgd=00000000
[   55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[   55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc
xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common
xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle
iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables
des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii
cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6
xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED
xt_comment x_tables ipv6
[   55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G
   T 5.8.17 #1
[   55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree)
[   55.148304] Workqueue: events acm_softint [cdc_acm]
[   55.153196] PC is at kobject_get+0x10/0xa4
[   55.157302] LR is at usb_get_dev+0x14/0x1c
[   55.161402] pc : [<8047c06c>]    lr : [<80560448>]    psr: 20000193
[   55.167671] sp : bca39ea8  ip : 00007374  fp : bf6cbd80
[   55.172899] r10: 00000000  r9 : bdd92284  r8 : bdd92008
[   55.178128] r7 : 6b6b6b6b  r6 : fffffffe  r5 : 60000113  r4 : 6b6b6be3
[   55.184658] r3 : 6b6b6b6b  r2 : 00000111  r1 : 00000000  r0 : 6b6b6be3
[   55.191191] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM Segment none
[   55.198417] Control: 10c5387d  Table: bcf0c06a  DAC: 00000051
[   55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89)
[   55.210439] Stack: (0xbca39ea8 to 0xbca3a000)
[   55.214805] 9ea0:                   bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8
[   55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c
[   55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001
[   55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00
[   55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80
[   55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae
[   55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4
[   55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000
[   55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000
[   55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c)
[   55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8)
[   55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0)
[   55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm])
[   55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8)
[   55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc)
[   55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180)
[   55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c)
[   55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8)

Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |   48 +++++++++++++++++++++++++++++---------------
 1 file changed, 32 insertions(+), 16 deletions(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -147,17 +147,29 @@ static inline int acm_set_control(struct
 #define acm_send_break(acm, ms) \
 	acm_ctrl_msg(acm, USB_CDC_REQ_SEND_BREAK, ms, NULL, 0)
 
-static void acm_kill_urbs(struct acm *acm)
+static void acm_poison_urbs(struct acm *acm)
 {
 	int i;
 
-	usb_kill_urb(acm->ctrlurb);
+	usb_poison_urb(acm->ctrlurb);
 	for (i = 0; i < ACM_NW; i++)
-		usb_kill_urb(acm->wb[i].urb);
+		usb_poison_urb(acm->wb[i].urb);
 	for (i = 0; i < acm->rx_buflimit; i++)
-		usb_kill_urb(acm->read_urbs[i]);
+		usb_poison_urb(acm->read_urbs[i]);
+}
+
+static void acm_unpoison_urbs(struct acm *acm)
+{
+	int i;
+
+	for (i = 0; i < acm->rx_buflimit; i++)
+		usb_unpoison_urb(acm->read_urbs[i]);
+	for (i = 0; i < ACM_NW; i++)
+		usb_unpoison_urb(acm->wb[i].urb);
+	usb_unpoison_urb(acm->ctrlurb);
 }
 
+
 /*
  * Write buffer management.
  * All of these assume proper locks taken by the caller.
@@ -225,9 +237,10 @@ static int acm_start_wb(struct acm *acm,
 
 	rc = usb_submit_urb(wb->urb, GFP_ATOMIC);
 	if (rc < 0) {
-		dev_err(&acm->data->dev,
-			"%s - usb_submit_urb(write bulk) failed: %d\n",
-			__func__, rc);
+		if (rc != -EPERM)
+			dev_err(&acm->data->dev,
+				"%s - usb_submit_urb(write bulk) failed: %d\n",
+				__func__, rc);
 		acm_write_done(acm, wb);
 	}
 	return rc;
@@ -482,11 +495,6 @@ static void acm_read_bulk_callback(struc
 	dev_vdbg(&acm->data->dev, "got urb %d, len %d, status %d\n",
 		rb->index, urb->actual_length, status);
 
-	if (!acm->dev) {
-		dev_dbg(&acm->data->dev, "%s - disconnected\n", __func__);
-		return;
-	}
-
 	switch (status) {
 	case 0:
 		usb_mark_last_busy(acm->dev);
@@ -741,6 +749,7 @@ static void acm_port_shutdown(struct tty
 	 * Need to grab write_lock to prevent race with resume, but no need to
 	 * hold it due to the tty-port initialised flag.
 	 */
+	acm_poison_urbs(acm);
 	spin_lock_irq(&acm->write_lock);
 	spin_unlock_irq(&acm->write_lock);
 
@@ -757,7 +766,8 @@ static void acm_port_shutdown(struct tty
 		usb_autopm_put_interface_async(acm->control);
 	}
 
-	acm_kill_urbs(acm);
+	acm_unpoison_urbs(acm);
+
 }
 
 static void acm_tty_cleanup(struct tty_struct *tty)
@@ -1587,8 +1597,14 @@ static void acm_disconnect(struct usb_in
 	if (!acm)
 		return;
 
-	mutex_lock(&acm->mutex);
 	acm->disconnected = true;
+	/*
+	 * there is a circular dependency. acm_softint() can resubmit
+	 * the URBs in error handling so we need to block any
+	 * submission right away
+	 */
+	acm_poison_urbs(acm);
+	mutex_lock(&acm->mutex);
 	if (acm->country_codes) {
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);
@@ -1607,7 +1623,6 @@ static void acm_disconnect(struct usb_in
 		tty_kref_put(tty);
 	}
 
-	acm_kill_urbs(acm);
 	cancel_delayed_work_sync(&acm->dwork);
 
 	tty_unregister_device(acm_tty_driver, acm->minor);
@@ -1649,7 +1664,7 @@ static int acm_suspend(struct usb_interf
 	if (cnt)
 		return 0;
 
-	acm_kill_urbs(acm);
+	acm_poison_urbs(acm);
 	cancel_delayed_work_sync(&acm->dwork);
 	acm->urbs_in_error_delay = 0;
 
@@ -1662,6 +1677,7 @@ static int acm_resume(struct usb_interfa
 	struct urb *urb;
 	int rv = 0;
 
+	acm_unpoison_urbs(acm);
 	spin_lock_irq(&acm->write_lock);
 
 	if (--acm->susp_count)

[PATCH 4.19 49/56] USB: cdc-acm: downgrade message to debug

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit e4c77070ad45fc940af1d7fb1e637c349e848951 upstream.

This failure is so common that logging an error here amounts
to spamming log files.

Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311130126.15972-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -664,7 +664,8 @@ static void acm_port_dtr_rts(struct tty_
 
 	res = acm_set_control(acm, val);
 	if (res && (acm->ctrl_caps & USB_CDC_CAP_LINE))
-		dev_err(&acm->control->dev, "failed to set dtr/rts\n");
+		/* This is broken in too many devices to spam the logs */
+		dev_dbg(&acm->control->dev, "failed to set dtr/rts\n");
 }
 
 static int acm_port_activate(struct tty_port *port, struct tty_struct *tty)

[PATCH 4.19 50/56] USB: cdc-acm: fix double free on probe failure

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 7180495cb3d0e2a2860d282a468b4146c21da78f upstream.

If tty-device registration fails the driver copy of any Country
Selection functional descriptor would end up being freed twice; first
explicitly in the error path and then again in the tty-port destructor.

Drop the first erroneous free that was left when fixing a tty-port
resource leak.

Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail")
Cc: stable@vger.kernel.org      # 4.19
Cc: Jaejoong Kim <climbbb.kim@gmail.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1566,7 +1566,6 @@ alloc_fail6:
 				&dev_attr_wCountryCodes);
 		device_remove_file(&acm->control->dev,
 				&dev_attr_iCountryCodeRelDate);
-		kfree(acm->country_codes);
 	}
 	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
 alloc_fail5:

[PATCH 4.19 51/56] USB: cdc-acm: fix use-after-free after probe failure

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 4e49bf376c0451ad2eae2592e093659cde12be9a upstream.

If tty-device registration fails the driver would fail to release the
data interface. When the device is later disconnected, the disconnect
callback would still be called for the data interface and would go about
releasing already freed resources.

Fixes: c93d81955005 ("usb: cdc-acm: fix error handling in acm_probe()")
Cc: stable@vger.kernel.org      # 3.9
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/cdc-acm.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1561,6 +1561,11 @@ skip_countries:
 
 	return 0;
 alloc_fail6:
+	if (!acm->combined_interfaces) {
+		/* Clear driver data so that disconnect() returns early. */
+		usb_set_intfdata(data_interface, NULL);
+		usb_driver_release_interface(&acm_driver, data_interface);
+	}
 	if (acm->country_codes) {
 		device_remove_file(&acm->control->dev,
 				&dev_attr_wCountryCodes);

[PATCH 4.19 52/56] usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference

[Greg Kroah-Hartman]

From: Tong Zhang <ztong0001@gmail.com>

commit 72035f4954f0bca2d8c47cf31b3629c42116f5b7 upstream.

init_dma_pools() calls dma_pool_create(...dev->dev) to create dma pool.
however, dev->dev is actually set after calling init_dma_pools(), which
effectively makes dma_pool_create(..NULL) and cause crash.
To fix this issue, init dma only after dev->dev is set.

[    1.317993] RIP: 0010:dma_pool_create+0x83/0x290
[    1.323257] Call Trace:
[    1.323390]  ? pci_write_config_word+0x27/0x30
[    1.323626]  init_dma_pools+0x41/0x1a0 [snps_udc_core]
[    1.323899]  udc_pci_probe+0x202/0x2b1 [amd5536udc_pci]

Fixes: 7c51247a1f62 (usb: gadget: udc: Provide correct arguments for 'dma_pool_create')
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210317230400.357756-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/amd5536udc_pci.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/gadget/udc/amd5536udc_pci.c
+++ b/drivers/usb/gadget/udc/amd5536udc_pci.c
@@ -154,6 +154,11 @@ static int udc_pci_probe(
 	pci_set_master(pdev);
 	pci_try_set_mwi(pdev);
 
+	dev->phys_addr = resource;
+	dev->irq = pdev->irq;
+	dev->pdev = pdev;
+	dev->dev = &pdev->dev;
+
 	/* init dma pools */
 	if (use_dma) {
 		retval = init_dma_pools(dev);
@@ -161,11 +166,6 @@ static int udc_pci_probe(
 			goto err_dma;
 	}
 
-	dev->phys_addr = resource;
-	dev->irq = pdev->irq;
-	dev->pdev = pdev;
-	dev->dev = &pdev->dev;
-
 	/* general probing */
 	if (udc_probe(dev)) {
 		retval = -ENODEV;

[PATCH 4.19 53/56] usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.

[Greg Kroah-Hartman]

From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>

commit 5e3bbae8ee3d677a0aa2919dc62b5c60ea01ba61 upstream.

Increased the waiting timeout for HPRT0.PrtSusp register field
to be set, because on HiKey 960 board HPRT0.PrtSusp wasn't
generated with the existing timeout.

Cc: <stable@vger.kernel.org> # 4.18
Fixes: 22bb5cfdf13a ("usb: dwc2: Fix host exit from hibernation flow.")
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/20210326102447.8F7FEA005D@mailhost.synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/hcd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -5560,7 +5560,7 @@ int dwc2_host_enter_hibernation(struct d
 	dwc2_writel(hsotg, hprt0, HPRT0);
 
 	/* Wait for the HPRT0.PrtSusp register field to be set */
-	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 3000))
+	if (dwc2_hsotg_wait_bit_set(hsotg, HPRT0, HPRT0_SUSP, 5000))
 		dev_warn(hsotg->dev, "Suspend wasn't generated\n");
 
 	/*

[PATCH 4.19 54/56] staging: rtl8192e: Fix incorrect source in memcpy()

[Greg Kroah-Hartman]

From: Atul Gopinathan <atulgopinathan@gmail.com>

commit 72ad25fbbb78930f892b191637359ab5b94b3190 upstream.

The variable "info_element" is of the following type:

	struct rtllib_info_element *info_element

defined in drivers/staging/rtl8192e/rtllib.h:

	struct rtllib_info_element {
		u8 id;
		u8 len;
		u8 data[];
	} __packed;

The "len" field defines the size of the "data[]" array. The code is
supposed to check if "info_element->len" is greater than 4 and later
equal to 6. If this is satisfied then, the last two bytes (the 4th and
5th element of u8 "data[]" array) are copied into "network->CcxRmState".

Right now the code uses "memcpy()" with the source as "&info_element[4]"
which would copy in wrong and unintended information. The struct
"rtllib_info_element" has a size of 2 bytes for "id" and "len",
therefore indexing will be done in interval of 2 bytes. So,
"info_element[4]" would point to data which is beyond the memory
allocated for this pointer (that is, at x+8, while "info_element" has
been allocated only from x to x+7 (2 + 6 => 8 bytes)).

This patch rectifies this error by using "&info_element->data[4]" which
correctly copies the last two bytes of "data[]".

NOTE: The faulty line of code came from the following commit:

commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")

The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c`
which had the faulty line of code. This file has been deleted (or
possibly renamed) with the contents copied in to a new file
`rtl8192e/rtllib_rx.c` along with additional code in the commit
94a799425eee (tagged in Fixes).

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192e/rtllib_rx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -1978,7 +1978,7 @@ static void rtllib_parse_mife_generic(st
 	    info_element->data[2] == 0x96 &&
 	    info_element->data[3] == 0x01) {
 		if (info_element->len == 6) {
-			memcpy(network->CcxRmState, &info_element[4], 2);
+			memcpy(network->CcxRmState, &info_element->data[4], 2);
 			if (network->CcxRmState[0] != 0)
 				network->bCcxRmEnable = true;
 			else

[PATCH 4.19 55/56] staging: rtl8192e: Change state information from u16 to u8

[Greg Kroah-Hartman]

From: Atul Gopinathan <atulgopinathan@gmail.com>

commit e78836ae76d20f38eed8c8c67f21db97529949da upstream.

The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4
bytes in total while the operations performed on this array through-out
the code base are only 2 bytes.

The "CcxRmState" field is fed only 2 bytes of data using memcpy():

(In rtllib_rx.c:1972)
	memcpy(network->CcxRmState, &info_element->data[4], 2)

With "info_element->data[]" being a u8 array, if 2 bytes are written
into "CcxRmState" (whose one element is u16 size), then the 2 u8
elements from "data[]" gets squashed and written into the first element
("CcxRmState[0]") while the second element ("CcxRmState[1]") is never
fed with any data.

Same in file rtllib_rx.c:2522:
	 memcpy(dst->CcxRmState, src->CcxRmState, 2);

The above line duplicates "src" data to "dst" but only writes 2 bytes
(and not 4, which is the actual size). Again, only 1st element gets the
value while the 2nd element remains uninitialized.

This later makes operations done with CcxRmState unpredictable in the
following lines as the 1st element is having a squashed number while the
2nd element is having an uninitialized random number.

rtllib_rx.c:1973:    if (network->CcxRmState[0] != 0)
rtllib_rx.c:1977:    network->MBssidMask = network->CcxRmState[1] & 0x07;

network->MBssidMask is also of type u8 and not u16.

Fix this by changing the type of "CcxRmState" from u16 to u8 so that the
data written into this array and read from it make sense and are not
random values.

NOTE: The wrong initialization of "CcxRmState" can be seen in the
following commit:

commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")

The above commit created a file `rtl8192e/ieee80211.h` which used to
have the faulty line. The file has been deleted (or possibly renamed)
with the contents copied in to a new file `rtl8192e/rtllib.h` along with
additional code in the commit 94a799425eee (tagged in Fixes).

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192e/rtllib.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -1110,7 +1110,7 @@ struct rtllib_network {
 	bool	bWithAironetIE;
 	bool	bCkipSupported;
 	bool	bCcxRmEnable;
-	u16	CcxRmState[2];
+	u8	CcxRmState[2];
 	bool	bMBssidValid;
 	u8	MBssidMask;
 	u8	MBssid[ETH_ALEN];

[PATCH 4.19 56/56] drivers: video: fbcon: fix NULL dereference in fbcon_cursor()

[Greg Kroah-Hartman]

From: Du Cheng <ducheng2@gmail.com>

commit 01faae5193d6190b7b3aa93dae43f514e866d652 upstream.

add null-check on function pointer before dereference on ops->cursor

Reported-by: syzbot+b67aaae8d3a927f68d20@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210312081421.452405-1-ducheng2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/core/fbcon.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -1306,6 +1306,9 @@ static void fbcon_cursor(struct vc_data
 
 	ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1;
 
+	if (!ops->cursor)
+		return;
+
 	ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 }

Re: [PATCH 4.19 00/56] 4.19.185-rc1 review

[Guenter Roeck]

On Mon, Apr 05, 2021 at 10:53:31AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.185 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 07 Apr 2021 08:50:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 423 pass: 423 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 4.19 00/56] 4.19.185-rc1 review

[Shuah Khan]

On 4/5/21 2:53 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.185 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 07 Apr 2021 08:50:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.185-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 4.19 00/56] 4.19.185-rc1 review

[Naresh Kamboju]

On Mon, 5 Apr 2021 at 14:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.185 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 07 Apr 2021 08:50:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.185-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 4.19.185-rc1
* git: ['https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git',
'https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc']
* git branch: linux-4.19.y
* git commit: e80ef2122d5c0531670cb281f5beea2cb469aee1
* git describe: v4.19.184-57-ge80ef2122d5c
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.184-57-ge80ef2122d5c

## No regressions (compared to v4.19.184-40-gea7c9d15cb8d)

## No fixes (compared to v4.19.184-40-gea7c9d15cb8d)

## Test result summary
 total: 69440, pass: 56308, fail: 1824, skip: 11083, xfail: 225,

## Build Summary
* arm: 97 total, 97 passed, 0 failed
* arm64: 25 total, 25 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 14 total, 14 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 39 total, 39 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 15 total, 15 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-
* kselftest-android
* kselftest-bpf
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-vsyscall-mode-native-
* kselftest-vsyscall-mode-none-
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/56] 4.19.185-rc1 review

[Samuel Zou]

On 2021/4/5 16:53, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.185 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 07 Apr 2021 08:50:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.185-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 4.19.185-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-4.19.y
Version: 4.19.185-rc1
Commit: e80ef2122d5c0531670cb281f5beea2cb469aee1
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 4679
passed: 4679
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 4679
passed: 4679
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 4.19 00/56] 4.19.185-rc1 review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 646 bytes --]

Hi!

> This is the start of the stable review cycle for the 4.19.185 release.
> There are 56 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

CIP testing did not find any kernel problems here: (Siemens boards
are unavailable)

https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-4.19.y

Tested-by: Pavel Machek (CIP) <pavel@denx.de>

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]