Re: [PATCH v2 6/6] can: m_can: Add support for transceiver as phy

[Marc Kleine-Budde <mkl@pengutronix.de>]

[-- Attachment #1: Type: text/plain, Size: 4801 bytes --]

On 14.04.2021 19:35:21, Aswath Govindraju wrote:
> From: Faiz Abbas <faiz_abbas@ti.com>
> 
> Add support for implementing transceiver node as phy. The max_bitrate is
> obtained by getting a phy attribute.
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> ---
>  drivers/net/can/m_can/m_can.c          | 18 ++++++++++++++++++
>  drivers/net/can/m_can/m_can.h          |  2 ++
>  drivers/net/can/m_can/m_can_platform.c | 15 +++++++++++++++
>  3 files changed, 35 insertions(+)
> 
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 34073cd077e4..4807a1f69cc7 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -21,6 +21,7 @@
>  #include <linux/iopoll.h>
>  #include <linux/can/dev.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/phy/phy.h>
>  
>  #include "m_can.h"
>  
> @@ -1514,6 +1515,7 @@ static void m_can_stop(struct net_device *dev)
>  static int m_can_close(struct net_device *dev)
>  {
>  	struct m_can_classdev *cdev = netdev_priv(dev);
> +	int err;
>  
>  	netif_stop_queue(dev);
>  
> @@ -1536,6 +1538,14 @@ static int m_can_close(struct net_device *dev)
>  	close_candev(dev);
>  	can_led_event(dev, CAN_LED_EVENT_STOP);
>  
> +	if (cdev->transceiver) {
> +		err = phy_power_off(cdev->transceiver);

phy_power_off() can handle NULL pointers

> +		if (err) {
> +			netdev_err(dev, "error powering off phy, err=%d\n", err);
> +			return err;

As far as I can see it already print an error message in case of an
error.

> +		}
> +	}
> +
>  	return 0;
>  }
>  
> @@ -1720,6 +1730,14 @@ static int m_can_open(struct net_device *dev)
>  	struct m_can_classdev *cdev = netdev_priv(dev);
>  	int err;
>  
> +	if (cdev->transceiver) {
> +		err = phy_power_on(cdev->transceiver);
> +		if (err) {
> +			netdev_err(dev, "error powering on phy, err=%d\n", err);
> +			return err;
> +		}

same here

> +	}
> +
>  	err = m_can_clk_start(cdev);
>  	if (err)
>  		return err;
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> index ace071c3e58c..38cad068abad 100644
> --- a/drivers/net/can/m_can/m_can.h
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -28,6 +28,7 @@
>  #include <linux/iopoll.h>
>  #include <linux/can/dev.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/phy/phy.h>
>  
>  /* m_can lec values */
>  enum m_can_lec_type {
> @@ -82,6 +83,7 @@ struct m_can_classdev {
>  	struct workqueue_struct *tx_wq;
>  	struct work_struct tx_work;
>  	struct sk_buff *tx_skb;
> +	struct phy *transceiver;
>  
>  	struct can_bittiming_const *bit_timing;
>  	struct can_bittiming_const *data_timing;
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> index 599de0e08cd7..566ba25fb186 100644
> --- a/drivers/net/can/m_can/m_can_platform.c
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -6,6 +6,7 @@
>  // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>  
>  #include <linux/platform_device.h>
> +#include <linux/phy/phy.h>
>  
>  #include "m_can.h"
>  
> @@ -67,6 +68,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	void __iomem *addr;
>  	void __iomem *mram_addr;
> +	struct phy *transceiver;
>  	int irq, ret = 0;
>  
>  	mcan_class = m_can_class_allocate_dev(&pdev->dev,
> @@ -101,6 +103,18 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  		goto probe_fail;
>  	}
>  
> +	transceiver = devm_of_phy_optional_get_by_index(&pdev->dev, pdev->dev.of_node, 0);
> +	if (IS_ERR(transceiver)) {
> +		ret = PTR_ERR(transceiver);
> +		dev_err(&pdev->dev, "error while getting phy, err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	if (!transceiver)
> +		dev_info(&pdev->dev, "No transceiver phy found\n");

I don't think you should print anything here...
If the driver was working before w/o a phy it will still work without one.

> +	else
> +		priv->cdev.can.bitrate_max = transceiver->attrs.max_link_rate;
> +
>  	priv->base = addr;
>  	priv->mram_base = mram_addr;
>  
> @@ -108,6 +122,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
>  	mcan_class->pm_clock_support = 1;
>  	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
>  	mcan_class->dev = &pdev->dev;
> +	mcan_class->transceiver = transceiver;
>  
>  	mcan_class->ops = &m_can_plat_ops;

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]