* [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
@ 2021-04-15 9:16 Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw)
To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg
Cc: dri-devel, linux-kernel, Stefan Riedmueller
The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
Add the corresponding connector type and 8 bpc as default bus_format.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
drivers/gpu/drm/panel/panel-simple.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..44583d0ed902 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
.width = 211,
.height = 158,
},
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct drm_display_mode auo_g121ean01_mode = {
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] drm/panel: Add connector_type for some EDT displays
2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller
@ 2021-04-15 9:16 ` Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller
2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller
2 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw)
To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg
Cc: dri-devel, linux-kernel, Stefan Riedmueller
The connector_type for following two EDT displays is missing:
- EDT ETM0430G0DH6
- EDT ETM0700G0BDH6
Both are parallel displays thus add the corresponding connector_type.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
drivers/gpu/drm/panel/panel-simple.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 44583d0ed902..723c09a82c4c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1900,6 +1900,7 @@ static const struct panel_desc edt_etm0430g0dh6 = {
.width = 95,
.height = 54,
},
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct drm_display_mode edt_et057090dhu_mode = {
@@ -1964,6 +1965,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
};
static const struct display_timing evervision_vgg804821_timing = {
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6
2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller
@ 2021-04-15 9:16 ` Stefan Riedmueller
2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller
2 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw)
To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg
Cc: dri-devel, linux-kernel, Stefan Riedmueller
Add corresponding bus_format and bus_flags for the EDT ETM0430G0DH6
display.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
drivers/gpu/drm/panel/panel-simple.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 723c09a82c4c..1bbb205a3b81 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1900,6 +1900,8 @@ static const struct panel_desc edt_etm0430g0dh6 = {
.width = 95,
.height = 54,
},
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
--
2.25.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller
@ 2021-05-26 7:34 ` Stefan Riedmüller
2021-06-21 8:22 ` Stefan Riedmüller
2 siblings, 1 reply; 7+ messages in thread
From: Stefan Riedmüller @ 2021-05-26 7:34 UTC (permalink / raw)
To: daniel, airlied, sam, thierry.reding; +Cc: dri-devel, linux-kernel
Hi,
gentle ping for this small series.
Regards,
Stefan
On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> Add the corresponding connector type and 8 bpc as default bus_format.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> ---
> drivers/gpu/drm/panel/panel-simple.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c
> b/drivers/gpu/drm/panel/panel-simple.c
> index 4e2dad314c79..44583d0ed902 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
> .width = 211,
> .height = 158,
> },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> };
>
> static const struct drm_display_mode auo_g121ean01_mode = {
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller
@ 2021-06-21 8:22 ` Stefan Riedmüller
2021-06-21 14:27 ` Laurent Pinchart
[not found] ` <20210621141739.GA823900@ravnborg.org>
0 siblings, 2 replies; 7+ messages in thread
From: Stefan Riedmüller @ 2021-06-21 8:22 UTC (permalink / raw)
To: daniel, airlied, sam, thierry.reding
Cc: dri-devel, laurent.pinchart, linux-kernel
Hi,
another gentle ping.
Also adding Laurent Pinchart to CC.
Regards,
Stefan
On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote:
> Hi,
>
> gentle ping for this small series.
>
> Regards,
> Stefan
>
> On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> > Add the corresponding connector type and 8 bpc as default bus_format.
> >
> > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> > ---
> > drivers/gpu/drm/panel/panel-simple.c | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > b/drivers/gpu/drm/panel/panel-simple.c
> > index 4e2dad314c79..44583d0ed902 100644
> > --- a/drivers/gpu/drm/panel/panel-simple.c
> > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
> > .width = 211,
> > .height = 158,
> > },
> > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> > + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> > };
> >
> > static const struct drm_display_mode auo_g121ean01_mode = {
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
2021-06-21 8:22 ` Stefan Riedmüller
@ 2021-06-21 14:27 ` Laurent Pinchart
[not found] ` <20210621141739.GA823900@ravnborg.org>
1 sibling, 0 replies; 7+ messages in thread
From: Laurent Pinchart @ 2021-06-21 14:27 UTC (permalink / raw)
To: Stefan Riedmüller
Cc: daniel, airlied, sam, thierry.reding, dri-devel, linux-kernel
Hi Stefan,
Thank you for the patch.
On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote:
> Hi,
>
> another gentle ping.
Sorry for the delay, I have way too little bandwidth these days :-S
> Also adding Laurent Pinchart to CC.
>
> On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote:
> > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote:
> > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG.
> > > Add the corresponding connector type and 8 bpc as default bus_format.
> > >
> > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
It will be interesting to add support for the 6bpp mode at some point (I
assume through a custom DT property that reports the state of the
panel's SEL68 pin, as it should be strapped in most cases).
> > > ---
> > > drivers/gpu/drm/panel/panel-simple.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/panel/panel-simple.c
> > > b/drivers/gpu/drm/panel/panel-simple.c
> > > index 4e2dad314c79..44583d0ed902 100644
> > > --- a/drivers/gpu/drm/panel/panel-simple.c
> > > +++ b/drivers/gpu/drm/panel/panel-simple.c
> > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = {
> > > .width = 211,
> > > .height = 158,
> > > },
> > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> > > + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> > > };
> > >
> > > static const struct drm_display_mode auo_g121ean01_mode = {
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel
[not found] ` <20210621141739.GA823900@ravnborg.org>
@ 2021-06-21 15:04 ` Stefan Riedmüller
0 siblings, 0 replies; 7+ messages in thread
From: Stefan Riedmüller @ 2021-06-21 15:04 UTC (permalink / raw)
To: sam
Cc: daniel, dri-devel, laurent.pinchart, airlied, linux-kernel,
thierry.reding
Hi Sam,
On Mon, 2021-06-21 at 16:17 +0200, Sam Ravnborg wrote:
> Hi Stefan,
>
> On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote:
> > Hi,
> >
> > another gentle ping.
> >
> > Also adding Laurent Pinchart to CC.
>
> Can I ask you to resend the whole lot. I have resurfaced after an
> off-line period and deleted all pending mails.
>
> I could probarly hunt down the mails somewhere but resend is easier on
> my end.
Sure, no problem, I'll send it out ASAP.
Stefan
>
> Sam
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-06-21 15:04 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller
2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller
2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller
2021-06-21 8:22 ` Stefan Riedmüller
2021-06-21 14:27 ` Laurent Pinchart
[not found] ` <20210621141739.GA823900@ravnborg.org>
2021-06-21 15:04 ` Stefan Riedmüller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).