* [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel @ 2021-04-15 9:16 Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller ` (2 more replies) 0 siblings, 3 replies; 7+ messages in thread From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw) To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg Cc: dri-devel, linux-kernel, Stefan Riedmueller The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. Add the corresponding connector type and 8 bpc as default bus_format. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 4e2dad314c79..44583d0ed902 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { .width = 211, .height = 158, }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, + .connector_type = DRM_MODE_CONNECTOR_LVDS, }; static const struct drm_display_mode auo_g121ean01_mode = { -- 2.25.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/3] drm/panel: Add connector_type for some EDT displays 2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller @ 2021-04-15 9:16 ` Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller 2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller 2 siblings, 0 replies; 7+ messages in thread From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw) To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg Cc: dri-devel, linux-kernel, Stefan Riedmueller The connector_type for following two EDT displays is missing: - EDT ETM0430G0DH6 - EDT ETM0700G0BDH6 Both are parallel displays thus add the corresponding connector_type. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 44583d0ed902..723c09a82c4c 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1900,6 +1900,7 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct drm_display_mode edt_et057090dhu_mode = { @@ -1964,6 +1965,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = { }, .bus_format = MEDIA_BUS_FMT_RGB666_1X18, .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, }; static const struct display_timing evervision_vgg804821_timing = { -- 2.25.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller @ 2021-04-15 9:16 ` Stefan Riedmueller 2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller 2 siblings, 0 replies; 7+ messages in thread From: Stefan Riedmueller @ 2021-04-15 9:16 UTC (permalink / raw) To: Thierry Reding, David Airlie, Daniel Vetter, Sam Ravnborg Cc: dri-devel, linux-kernel, Stefan Riedmueller Add corresponding bus_format and bus_flags for the EDT ETM0430G0DH6 display. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- drivers/gpu/drm/panel/panel-simple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 723c09a82c4c..1bbb205a3b81 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1900,6 +1900,8 @@ static const struct panel_desc edt_etm0430g0dh6 = { .width = 95, .height = 54, }, + .bus_format = MEDIA_BUS_FMT_RGB666_1X18, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE, .connector_type = DRM_MODE_CONNECTOR_DPI, }; -- 2.25.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel 2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller @ 2021-05-26 7:34 ` Stefan Riedmüller 2021-06-21 8:22 ` Stefan Riedmüller 2 siblings, 1 reply; 7+ messages in thread From: Stefan Riedmüller @ 2021-05-26 7:34 UTC (permalink / raw) To: daniel, airlied, sam, thierry.reding; +Cc: dri-devel, linux-kernel Hi, gentle ping for this small series. Regards, Stefan On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > Add the corresponding connector type and 8 bpc as default bus_format. > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > --- > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c > index 4e2dad314c79..44583d0ed902 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > .width = 211, > .height = 158, > }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > }; > > static const struct drm_display_mode auo_g121ean01_mode = { ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel 2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller @ 2021-06-21 8:22 ` Stefan Riedmüller 2021-06-21 14:27 ` Laurent Pinchart [not found] ` <20210621141739.GA823900@ravnborg.org> 0 siblings, 2 replies; 7+ messages in thread From: Stefan Riedmüller @ 2021-06-21 8:22 UTC (permalink / raw) To: daniel, airlied, sam, thierry.reding Cc: dri-devel, laurent.pinchart, linux-kernel Hi, another gentle ping. Also adding Laurent Pinchart to CC. Regards, Stefan On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote: > Hi, > > gentle ping for this small series. > > Regards, > Stefan > > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > > Add the corresponding connector type and 8 bpc as default bus_format. > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> > > --- > > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > > 1 file changed, 2 insertions(+) > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > > b/drivers/gpu/drm/panel/panel-simple.c > > index 4e2dad314c79..44583d0ed902 100644 > > --- a/drivers/gpu/drm/panel/panel-simple.c > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > > .width = 211, > > .height = 158, > > }, > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > > }; > > > > static const struct drm_display_mode auo_g121ean01_mode = { ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel 2021-06-21 8:22 ` Stefan Riedmüller @ 2021-06-21 14:27 ` Laurent Pinchart [not found] ` <20210621141739.GA823900@ravnborg.org> 1 sibling, 0 replies; 7+ messages in thread From: Laurent Pinchart @ 2021-06-21 14:27 UTC (permalink / raw) To: Stefan Riedmüller Cc: daniel, airlied, sam, thierry.reding, dri-devel, linux-kernel Hi Stefan, Thank you for the patch. On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote: > Hi, > > another gentle ping. Sorry for the delay, I have way too little bandwidth these days :-S > Also adding Laurent Pinchart to CC. > > On Wed, 2021-05-26 at 07:34 +0000, Stefan Riedmüller wrote: > > On Thu, 2021-04-15 at 11:16 +0200, Stefan Riedmueller wrote: > > > The AUO G104SN02 V2 is an LVDS display which supports 6 and 8 bpc PSWG. > > > Add the corresponding connector type and 8 bpc as default bus_format. > > > > > > Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> It will be interesting to add support for the 6bpp mode at some point (I assume through a custom DT property that reports the state of the panel's SEL68 pin, as it should be strapped in most cases). > > > --- > > > drivers/gpu/drm/panel/panel-simple.c | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > > > b/drivers/gpu/drm/panel/panel-simple.c > > > index 4e2dad314c79..44583d0ed902 100644 > > > --- a/drivers/gpu/drm/panel/panel-simple.c > > > +++ b/drivers/gpu/drm/panel/panel-simple.c > > > @@ -1098,6 +1098,8 @@ static const struct panel_desc auo_g104sn02 = { > > > .width = 211, > > > .height = 158, > > > }, > > > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, > > > + .connector_type = DRM_MODE_CONNECTOR_LVDS, > > > }; > > > > > > static const struct drm_display_mode auo_g121ean01_mode = { -- Regards, Laurent Pinchart ^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <20210621141739.GA823900@ravnborg.org>]
* Re: [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel [not found] ` <20210621141739.GA823900@ravnborg.org> @ 2021-06-21 15:04 ` Stefan Riedmüller 0 siblings, 0 replies; 7+ messages in thread From: Stefan Riedmüller @ 2021-06-21 15:04 UTC (permalink / raw) To: sam Cc: daniel, dri-devel, laurent.pinchart, airlied, linux-kernel, thierry.reding Hi Sam, On Mon, 2021-06-21 at 16:17 +0200, Sam Ravnborg wrote: > Hi Stefan, > > On Mon, Jun 21, 2021 at 08:22:10AM +0000, Stefan Riedmüller wrote: > > Hi, > > > > another gentle ping. > > > > Also adding Laurent Pinchart to CC. > > Can I ask you to resend the whole lot. I have resurfaced after an > off-line period and deleted all pending mails. > > I could probarly hunt down the mails somewhere but resend is easier on > my end. Sure, no problem, I'll send it out ASAP. Stefan > > Sam ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-06-21 15:04 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-04-15 9:16 [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 2/3] drm/panel: Add connector_type for some EDT displays Stefan Riedmueller 2021-04-15 9:16 ` [PATCH 3/3] drm/panel: Add bus_format and bus_flags for EDT ETM0430G0DH6 Stefan Riedmueller 2021-05-26 7:34 ` [PATCH 1/3] drm/panel: Add connector_type and bus_format for AUO G104SN02 V2 panel Stefan Riedmüller 2021-06-21 8:22 ` Stefan Riedmüller 2021-06-21 14:27 ` Laurent Pinchart [not found] ` <20210621141739.GA823900@ravnborg.org> 2021-06-21 15:04 ` Stefan Riedmüller
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).