[PATCH 5.4 00/71] 5.4.122-rc1 review

[PATCH 5.4 00/71] 5.4.122-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.122 release.
There are 71 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.122-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.122-rc1

Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
    Bluetooth: L2CAP: Fix handling LE modes by L2CAP_OPTIONS

Eric Biggers <ebiggers@google.com>
    ext4: fix error handling in ext4_end_enable_verity()

Christoph Hellwig <hch@lst.de>
    nvme-multipath: fix double initialization of ANA state

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    tty: vt: always invoke vc->vc_sw->con_resize callback

Maciej W. Rozycki <macro@orcam.me.uk>
    vt: Fix character height handling with VT_RESIZEX

Maciej W. Rozycki <macro@orcam.me.uk>
    vgacon: Record video mode changes with VT_RESIZEX

Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
    video: hgafb: fix potential NULL pointer dereference

Tom Seewald <tseewald@gmail.com>
    qlcnic: Add null check after calling netdev_alloc_skb

Phillip Potter <phil@philpotter.co.uk>
    leds: lp5523: check return value of lp5xx_read and jump to cleanup code

Darrick J. Wong <djwong@kernel.org>
    ics932s401: fix broken handling of errors when word reading fails

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    net: rtlwifi: properly check for alloc_workqueue() failure

Phillip Potter <phil@philpotter.co.uk>
    scsi: ufs: handle cleanup correctly on devm_reset_control_get error

Anirudh Rayabharam <mail@anirudhrb.com>
    net: stmicro: handle clk_prepare() failure during init

Du Cheng <ducheng2@gmail.com>
    ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "niu: fix missing checks of niu_pci_eeprom_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "qlcnic: Avoid potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rtlwifi: fix a potential NULL pointer dereference"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "media: rcar_drif: fix a memory disclosure"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    cdrom: gdrom: initialize global variable at init time

Atul Gopinathan <atulgopinathan@gmail.com>
    cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "gdrom: fix a memory leak bug"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "scsi: ufs: fix a missing check of devm_reset_control_get"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ecryptfs: replace BUG_ON with error handling code"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: imsttfb: fix potential NULL pointer dereferences"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "net: stmicro: fix a missing check of clk_prepare"

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "video: hgafb: fix potential NULL pointer dereference"

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix crash with transient storage and zero chunk size

Mikulas Patocka <mpatocka@redhat.com>
    dm snapshot: fix a crash when an origin has no snapshots

Jan Beulich <jbeulich@suse.com>
    xen-pciback: reconfigure also from backend watch handler

Daniel Beer <dlbeer@gmail.com>
    mmc: sdhci-pci-gli: increase 1.8V regulator wait

Guchun Chen <guchun.chen@amd.com>
    drm/amdgpu: update sdma golden setting for Navi12

Guchun Chen <guchun.chen@amd.com>
    drm/amdgpu: update gc golden setting for Navi12

Changfeng <Changfeng.Zhu@amd.com>
    drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"

Anirudh Rayabharam <mail@anirudhrb.com>
    rapidio: handle create_workqueue() failure

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    uio_hv_generic: Fix a memory leak in error handling paths

Elia Devito <eliadevito@gmail.com>
    ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Add fixup for HP OMEN laptop

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA

PeiSen Hou <pshou@realtek.com>
    ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293

Hui Wang <hui.wang@canonical.com>
    ALSA: hda/realtek: reset eapd coeff to default value for alc287

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix check for the size of isochronous packet payload

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Revert "ALSA: sb8: add a check for request_region"

Daniel Cordova A <danesc87@gmail.com>
    ALSA: hda: fixup headset for ASUS GU502 laptop

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

Takashi Iwai <tiwai@suse.de>
    ALSA: usb-audio: Validate MS endpoint descriptors

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: firewire-lib: fix calculation for size of IR context payload

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26

Takashi Iwai <tiwai@suse.de>
    ALSA: line6: Fix racy initialization of LINE6 MIDI

Takashi Iwai <tiwai@suse.de>
    ALSA: intel8x0: Don't update period unless prepared

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: fix memory leak in smb2_copychunk_range

Josef Bacik <josef@toxicpanda.com>
    btrfs: avoid RCU stalls while running delayed iputs

Zqiang <qiang.zhang@windriver.com>
    locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal

Daniel Wagner <dwagner@suse.de>
    nvmet: seset ns->file when open fails

Oleg Nesterov <oleg@redhat.com>
    ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

Dan Carpenter <dan.carpenter@oracle.com>
    RDMA/uverbs: Fix a NULL vs IS_ERR() bug

Hans de Goede <hdegoede@redhat.com>
    platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios

Liming Sun <limings@nvidia.com>
    platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue

Shay Drory <shayd@nvidia.com>
    RDMA/core: Don't access cm_id after its destruction

Maor Gottlieb <maorg@nvidia.com>
    RDMA/mlx5: Recover from fatal event in dual port mode

Zhen Lei <thunder.leizhen@huawei.com>
    scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

Bart Van Assche <bvanassche@acm.org>
    scsi: ufs: core: Increase the usable queue depth

Leon Romanovsky <leonro@nvidia.com>
    RDMA/rxe: Clear all QP fields if creation failed

Leon Romanovsky <leonro@nvidia.com>
    RDMA/siw: Release xarray entry

Leon Romanovsky <leonro@nvidia.com>
    RDMA/siw: Properly check send and receive CQ pointers

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    openrisc: Fix a memory leak

Dan Carpenter <dan.carpenter@oracle.com>
    firmware: arm_scpi: Prevent the ternary sign expansion bug


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/openrisc/kernel/setup.c                       |   2 +
 drivers/cdrom/gdrom.c                              |  13 +-
 drivers/firmware/arm_scpi.c                        |   4 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c             |   6 +-
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c              |  10 +-
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c             |   4 +
 drivers/gpu/drm/amd/amdgpu/soc15.c                 |   2 -
 drivers/hwmon/lm80.c                               |  11 +-
 drivers/infiniband/core/cma.c                      |   4 +-
 drivers/infiniband/core/uverbs_std_types_device.c  |   4 +-
 drivers/infiniband/hw/mlx5/main.c                  |   1 +
 drivers/infiniband/sw/rxe/rxe_qp.c                 |   7 ++
 drivers/infiniband/sw/siw/siw_verbs.c              |  11 +-
 drivers/leds/leds-lp5523.c                         |   2 +-
 drivers/md/dm-snap.c                               |   6 +-
 drivers/media/platform/rcar_drif.c                 |   1 -
 drivers/misc/ics932s401.c                          |   2 +-
 drivers/mmc/host/sdhci-pci-gli.c                   |   7 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c    |   3 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c  |   8 +-
 drivers/net/ethernet/sun/niu.c                     |  32 +++--
 drivers/net/wireless/realtek/rtlwifi/base.c        |  18 +--
 drivers/nvme/host/core.c                           |   3 +-
 drivers/nvme/host/multipath.c                      |  55 +++++----
 drivers/nvme/host/nvme.h                           |   8 +-
 drivers/nvme/target/io-cmd-file.c                  |   8 +-
 drivers/platform/mellanox/mlxbf-tmfifo.c           |  11 +-
 drivers/platform/x86/dell-smbios-wmi.c             |   3 +-
 drivers/rapidio/rio_cm.c                           |  17 ++-
 drivers/scsi/qla2xxx/qla_nx.c                      |   3 +-
 drivers/scsi/ufs/ufs-hisi.c                        |  15 ++-
 drivers/scsi/ufs/ufshcd.c                          |   5 +-
 drivers/tty/serial/mvebu-uart.c                    |   3 -
 drivers/tty/vt/vt.c                                |   2 +-
 drivers/tty/vt/vt_ioctl.c                          |   6 +-
 drivers/uio/uio_hv_generic.c                       |   8 +-
 drivers/video/console/vgacon.c                     |  56 +++++----
 drivers/video/fbdev/core/fbcon.c                   |   2 +-
 drivers/video/fbdev/hgafb.c                        |  21 ++--
 drivers/video/fbdev/imsttfb.c                      |   5 -
 drivers/xen/xen-pciback/xenbus.c                   |  22 +++-
 fs/btrfs/inode.c                                   |   1 +
 fs/cifs/smb2ops.c                                  |   2 +
 fs/ecryptfs/crypto.c                               |   6 +-
 fs/ext4/verity.c                                   |  89 ++++++++------
 include/linux/console_struct.h                     |   1 +
 kernel/locking/mutex-debug.c                       |   4 +-
 kernel/locking/mutex-debug.h                       |   2 +-
 kernel/locking/mutex.c                             |  18 ++-
 kernel/locking/mutex.h                             |   4 +-
 kernel/ptrace.c                                    |  18 ++-
 net/bluetooth/l2cap_sock.c                         |  24 +++-
 sound/firewire/Kconfig                             |   4 +-
 sound/firewire/amdtp-stream.c                      |  27 +++--
 sound/firewire/bebob/bebob.c                       |   2 +-
 sound/firewire/dice/dice-alesis.c                  |   2 +-
 sound/firewire/dice/dice-tcelectronic.c            |   4 +-
 sound/firewire/oxfw/oxfw.c                         |   1 -
 sound/isa/sb/sb8.c                                 |   4 -
 sound/pci/hda/patch_realtek.c                      | 135 ++++++++++++++++++++-
 sound/pci/intel8x0.c                               |   7 ++
 sound/usb/line6/driver.c                           |   4 +
 sound/usb/line6/pod.c                              |   5 -
 sound/usb/line6/variax.c                           |   6 -
 sound/usb/midi.c                                   |   4 +
 66 files changed, 532 insertions(+), 257 deletions(-)

[PATCH 5.4 01/71] firmware: arm_scpi: Prevent the ternary sign expansion bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d9cd78edb2e6b7e26747c0ec312be31e7ef196fe ]

How the type promotion works in ternary expressions is a bit tricky.
The problem is that scpi_clk_get_val() returns longs, "ret" is a int
which holds a negative error code, and le32_to_cpu() is an unsigned int.
We want the negative error code to be cast to a negative long.  But
because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and
becomes a high positive and then it is promoted to long and it is still
a high positive value.

Fix this by getting rid of the ternary.

Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda
Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[sudeep.holla: changed to return 0 as clock rate on error]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scpi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index a80c331c3a6e..e2995ec14401 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -552,8 +552,10 @@ static unsigned long scpi_clk_get_val(u16 clk_id)
 
 	ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id,
 				sizeof(le_clk_id), &rate, sizeof(rate));
+	if (ret)
+		return 0;
 
-	return ret ? ret : le32_to_cpu(rate);
+	return le32_to_cpu(rate);
 }
 
 static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
-- 
2.30.2

[PATCH 5.4 02/71] openrisc: Fix a memory leak

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit c019d92457826bb7b2091c86f36adb5de08405f9 ]

'setup_find_cpu_node()' take a reference on the node it returns.
This reference must be decremented when not needed anymore, or there will
be a leak.

Add the missing 'of_node_put(cpu)'.

Note that 'setup_cpuinfo()' that also calls this function already has a
correct 'of_node_put(cpu)' at its end.

Fixes: 9d02a4283e9c ("OpenRISC: Boot code")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/openrisc/kernel/setup.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index d668f5be3a99..ae104eb4becc 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -274,6 +274,8 @@ void calibrate_delay(void)
 	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
 		loops_per_jiffy / (500000 / HZ),
 		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
+
+	of_node_put(cpu);
 }
 
 void __init setup_arch(char **cmdline_p)
-- 
2.30.2

[PATCH 5.4 03/71] RDMA/siw: Properly check send and receive CQ pointers

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit a568814a55a0e82bbc7c7b51333d0c38e8fb5520 ]

The check for the NULL of pointer received from container_of() is
incorrect by definition as it points to some offset from NULL.

Change such check with proper NULL check of SIW QP attributes.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Link: https://lore.kernel.org/r/a7535a82925f6f4c1f062abaa294f3ae6e54bdd2.1620560310.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index 2c3704f0f10f..daa71469269e 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -314,7 +314,6 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 	struct siw_ucontext *uctx =
 		rdma_udata_to_drv_context(udata, struct siw_ucontext,
 					  base_ucontext);
-	struct siw_cq *scq = NULL, *rcq = NULL;
 	unsigned long flags;
 	int num_sqe, num_rqe, rv = 0;
 
@@ -353,10 +352,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 		rv = -EINVAL;
 		goto err_out;
 	}
-	scq = to_siw_cq(attrs->send_cq);
-	rcq = to_siw_cq(attrs->recv_cq);
 
-	if (!scq || (!rcq && !attrs->srq)) {
+	if (!attrs->send_cq || (!attrs->recv_cq && !attrs->srq)) {
 		siw_dbg(base_dev, "send CQ or receive CQ invalid\n");
 		rv = -EINVAL;
 		goto err_out;
@@ -423,8 +420,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 		}
 	}
 	qp->pd = pd;
-	qp->scq = scq;
-	qp->rcq = rcq;
+	qp->scq = to_siw_cq(attrs->send_cq);
+	qp->rcq = to_siw_cq(attrs->recv_cq);
 
 	if (attrs->srq) {
 		/*
-- 
2.30.2

[PATCH 5.4 04/71] RDMA/siw: Release xarray entry

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit a3d83276d98886879b5bf7b30b7c29882754e4df ]

The xarray entry is allocated in siw_qp_add(), but release was
missed in case zero-sized SQ was discovered.

Fixes: 661f385961f0 ("RDMA/siw: Fix handling of zero-sized Read and Receive Queues.")
Link: https://lore.kernel.org/r/f070b59d5a1114d5a4e830346755c2b3f141cde5.1620560472.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_verbs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index daa71469269e..b9ca54e372b4 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -397,7 +397,7 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd,
 	else {
 		/* Zero sized SQ is not supported */
 		rv = -EINVAL;
-		goto err_out;
+		goto err_out_xa;
 	}
 	if (num_rqe)
 		num_rqe = roundup_pow_of_two(num_rqe);
-- 
2.30.2

[PATCH 5.4 05/71] RDMA/rxe: Clear all QP fields if creation failed

[Greg Kroah-Hartman]

From: Leon Romanovsky <leonro@nvidia.com>

[ Upstream commit 67f29896fdc83298eed5a6576ff8f9873f709228 ]

rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly
created ones, but in case rxe_qp_from_init() failed it was filled with
garbage and caused tot the following error.

  refcount_t: underflow; use-after-free.
  WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Modules linked in:
  CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28
  Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55
  RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
  RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67
  RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800
  R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000
  FS:  00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   __refcount_sub_and_test include/linux/refcount.h:283 [inline]
   __refcount_dec_and_test include/linux/refcount.h:315 [inline]
   refcount_dec_and_test include/linux/refcount.h:333 [inline]
   kref_put include/linux/kref.h:64 [inline]
   rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805
   execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327
   rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391
   kref_put include/linux/kref.h:65 [inline]
   rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425
   _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline]
   ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231
   ib_create_qp include/rdma/ib_verbs.h:3644 [inline]
   create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920
   ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline]
   ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092
   add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717
   enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331
   ib_register_device drivers/infiniband/core/device.c:1413 [inline]
   ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365
   rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147
   rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247
   rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503
   rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline]
   rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250
   nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555
   rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195
   rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
   rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259
   netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
   netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
   netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
   sock_sendmsg_nosec net/socket.c:654 [inline]
   sock_sendmsg+0xcf/0x120 net/socket.c:674
   ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
   ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
   __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
   do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.1620717918.git.leonro@nvidia.com
Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_qp.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c
index f85273883794..d427a343c09f 100644
--- a/drivers/infiniband/sw/rxe/rxe_qp.c
+++ b/drivers/infiniband/sw/rxe/rxe_qp.c
@@ -260,6 +260,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp,
 	if (err) {
 		vfree(qp->sq.queue->buf);
 		kfree(qp->sq.queue);
+		qp->sq.queue = NULL;
 		return err;
 	}
 
@@ -313,6 +314,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp,
 		if (err) {
 			vfree(qp->rq.queue->buf);
 			kfree(qp->rq.queue);
+			qp->rq.queue = NULL;
 			return err;
 		}
 	}
@@ -373,6 +375,11 @@ int rxe_qp_from_init(struct rxe_dev *rxe, struct rxe_qp *qp, struct rxe_pd *pd,
 err2:
 	rxe_queue_cleanup(qp->sq.queue);
 err1:
+	qp->pd = NULL;
+	qp->rcq = NULL;
+	qp->scq = NULL;
+	qp->srq = NULL;
+
 	if (srq)
 		rxe_drop_ref(srq);
 	rxe_drop_ref(scq);
-- 
2.30.2

[PATCH 5.4 06/71] scsi: ufs: core: Increase the usable queue depth

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit d0b2b70eb12e9ffaf95e11b16b230a4e015a536c ]

With the current implementation of the UFS driver active_queues is 1
instead of 0 if all UFS request queues are idle. That causes
hctx_may_queue() to divide the queue depth by 2 when queueing a request and
hence reduces the usable queue depth.

The shared tag set code in the block layer keeps track of the number of
active request queues. blk_mq_tag_busy() is called before a request is
queued onto a hwq and blk_mq_tag_idle() is called some time after the hwq
became idle. blk_mq_tag_idle() is called from inside blk_mq_timeout_work().
Hence, blk_mq_tag_idle() is only called if a timer is associated with each
request that is submitted to a request queue that shares a tag set with
another request queue.

Adds a blk_mq_start_request() call in ufshcd_exec_dev_cmd(). This doubles
the queue depth on my test setup from 16 to 32.

In addition to increasing the usable queue depth, also fix the
documentation of the 'timeout' parameter in the header above
ufshcd_exec_dev_cmd().

Link: https://lore.kernel.org/r/20210513164912.5683-1-bvanassche@acm.org
Fixes: 7252a3603015 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts")
Cc: Can Guo <cang@codeaurora.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 25112c2fe2db..0429ba5d7d23 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2615,7 +2615,7 @@ static int ufshcd_wait_for_dev_cmd(struct ufs_hba *hba,
  * ufshcd_exec_dev_cmd - API for sending device management requests
  * @hba: UFS hba
  * @cmd_type: specifies the type (NOP, Query...)
- * @timeout: time in seconds
+ * @timeout: timeout in milliseconds
  *
  * NOTE: Since there is only one available tag for device management commands,
  * it is expected you hold the hba->dev_cmd.lock mutex.
@@ -2645,6 +2645,9 @@ static int ufshcd_exec_dev_cmd(struct ufs_hba *hba,
 	}
 	tag = req->tag;
 	WARN_ON_ONCE(!ufshcd_valid_tag(hba, tag));
+	/* Set the timeout such that the SCSI error handler is not activated. */
+	req->timeout = msecs_to_jiffies(2 * timeout);
+	blk_mq_start_request(req);
 
 	init_completion(&wait);
 	lrbp = &hba->lrb[tag];
-- 
2.30.2

[PATCH 5.4 07/71] scsi: qla2xxx: Fix error return code in qla82xx_write_flash_dword()

[Greg Kroah-Hartman]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ]

Fix to return a negative error code from the error handling case instead of
0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com
Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_nx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index c855d013ba8a..de567a025133 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1113,7 +1113,8 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr,
 		return ret;
 	}
 
-	if (qla82xx_flash_set_write_enable(ha))
+	ret = qla82xx_flash_set_write_enable(ha);
+	if (ret < 0)
 		goto done_write;
 
 	qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data);
-- 
2.30.2

[PATCH 5.4 08/71] RDMA/mlx5: Recover from fatal event in dual port mode

[Greg Kroah-Hartman]

From: Maor Gottlieb <maorg@nvidia.com>

[ Upstream commit 97f30d324ce6645a4de4ffb71e4ae9b8ca36ff04 ]

When there is fatal event on the slave port, the device is marked as not
active. We need to mark it as active again when the slave is recovered to
regain full functionality.

Fixes: d69a24e03659 ("IB/mlx5: Move IB event processing onto a workqueue")
Link: https://lore.kernel.org/r/8906754455bb23019ef223c725d2c0d38acfb80b.1620711734.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index e2656b68ec22..a173737cb022 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -6879,6 +6879,7 @@ static void *mlx5_ib_add_slave_port(struct mlx5_core_dev *mdev)
 
 		if (bound) {
 			rdma_roce_rescan_device(&dev->ib_dev);
+			mpi->ibdev->ib_active = true;
 			break;
 		}
 	}
-- 
2.30.2

[PATCH 5.4 09/71] RDMA/core: Dont access cm_id after its destruction

[Greg Kroah-Hartman]

From: Shay Drory <shayd@nvidia.com>

[ Upstream commit 889d916b6f8a48b8c9489fffcad3b78eedd01a51 ]

restrack should only be attached to a cm_id while the ID has a valid
device pointer. It is set up when the device is first loaded, but not
cleared when the device is removed. There is also two copies of the device
pointer, one private and one in the public API, and these were left out of
sync.

Make everything go to NULL together and manipulate restrack right around
the device assignments.

Found by syzcaller:
BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline]
BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline]
BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
Write of size 8 at addr dead000000000108 by task syz-executor716/334

CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0xbe/0xf9 lib/dump_stack.c:120
 __kasan_report mm/kasan/report.c:400 [inline]
 kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413
 __list_del include/linux/list.h:112 [inline]
 __list_del_entry include/linux/list.h:135 [inline]
 list_del include/linux/list.h:146 [inline]
 cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline]
 cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline]
 cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783
 _destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862
 ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185
 ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576
 ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797
 __fput+0x169/0x540 fs/file_table.c:280
 task_work_run+0xb7/0x100 kernel/task_work.c:140
 exit_task_work include/linux/task_work.h:30 [inline]
 do_exit+0x7da/0x17f0 kernel/exit.c:825
 do_group_exit+0x9e/0x190 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931
 do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 255d0c14b375 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count")
Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.1620711734.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/cma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index ecac62a7b59e..92428990f0cc 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -530,6 +530,7 @@ static void cma_release_dev(struct rdma_id_private *id_priv)
 	list_del(&id_priv->list);
 	cma_deref_dev(id_priv->cma_dev);
 	id_priv->cma_dev = NULL;
+	id_priv->id.device = NULL;
 	if (id_priv->id.route.addr.dev_addr.sgid_attr) {
 		rdma_put_gid_attr(id_priv->id.route.addr.dev_addr.sgid_attr);
 		id_priv->id.route.addr.dev_addr.sgid_attr = NULL;
@@ -1871,6 +1872,7 @@ void rdma_destroy_id(struct rdma_cm_id *id)
 				iw_destroy_cm_id(id_priv->cm_id.iw);
 		}
 		cma_leave_mc_groups(id_priv);
+		rdma_restrack_del(&id_priv->res);
 		cma_release_dev(id_priv);
 	}
 
@@ -3580,7 +3582,7 @@ int rdma_listen(struct rdma_cm_id *id, int backlog)
 	}
 
 	id_priv->backlog = backlog;
-	if (id->device) {
+	if (id_priv->cma_dev) {
 		if (rdma_cap_ib_cm(id->device, 1)) {
 			ret = cma_ib_listen(id_priv);
 			if (ret)
-- 
2.30.2

[PATCH 5.4 10/71] platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue

[Greg Kroah-Hartman]

From: Liming Sun <limings@nvidia.com>

[ Upstream commit 1c0e5701c5e792c090aef0e5b9b8923c334d9324 ]

The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.

Fixes: 1357dfd7261f ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/mellanox/mlxbf-tmfifo.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/mellanox/mlxbf-tmfifo.c b/drivers/platform/mellanox/mlxbf-tmfifo.c
index 5739a9669b29..92bda873d44a 100644
--- a/drivers/platform/mellanox/mlxbf-tmfifo.c
+++ b/drivers/platform/mellanox/mlxbf-tmfifo.c
@@ -294,6 +294,9 @@ mlxbf_tmfifo_get_next_desc(struct mlxbf_tmfifo_vring *vring)
 	if (vring->next_avail == virtio16_to_cpu(vdev, vr->avail->idx))
 		return NULL;
 
+	/* Make sure 'avail->idx' is visible already. */
+	virtio_rmb(false);
+
 	idx = vring->next_avail % vr->num;
 	head = virtio16_to_cpu(vdev, vr->avail->ring[idx]);
 	if (WARN_ON(head >= vr->num))
@@ -322,7 +325,7 @@ static void mlxbf_tmfifo_release_desc(struct mlxbf_tmfifo_vring *vring,
 	 * done or not. Add a memory barrier here to make sure the update above
 	 * completes before updating the idx.
 	 */
-	mb();
+	virtio_mb(false);
 	vr->used->idx = cpu_to_virtio16(vdev, vr_idx + 1);
 }
 
@@ -730,6 +733,12 @@ static bool mlxbf_tmfifo_rxtx_one_desc(struct mlxbf_tmfifo_vring *vring,
 		desc = NULL;
 		fifo->vring[is_rx] = NULL;
 
+		/*
+		 * Make sure the load/store are in order before
+		 * returning back to virtio.
+		 */
+		virtio_mb(false);
+
 		/* Notify upper layer that packet is done. */
 		spin_lock_irqsave(&fifo->spin_lock[is_rx], flags);
 		vring_interrupt(0, vring->vq);
-- 
2.30.2

[PATCH 5.4 11/71] platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 3a53587423d25c87af4b4126a806a0575104b45e ]

init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems
where the Dell WMI interface is supported. While exit_dell_smbios_wmi()
unregisters it unconditionally, this leads to the following oops:

[  175.722921] ------------[ cut here ]------------
[  175.722925] Unexpected driver unregister!
[  175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40
...
[  175.723089] Call Trace:
[  175.723094]  cleanup_module+0x5/0xedd [dell_smbios]
...
[  175.723148] ---[ end trace 064c34e1ad49509d ]---

Make the unregister happen on the same condition the register happens
to fix this.

Cc: Mario Limonciello <mario.limonciello@outlook.com>
Fixes: 1a258e670434 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@outlook.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/dell-smbios-wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell-smbios-wmi.c
index 27a298b7c541..c97bd4a45242 100644
--- a/drivers/platform/x86/dell-smbios-wmi.c
+++ b/drivers/platform/x86/dell-smbios-wmi.c
@@ -271,7 +271,8 @@ int init_dell_smbios_wmi(void)
 
 void exit_dell_smbios_wmi(void)
 {
-	wmi_driver_unregister(&dell_smbios_wmi_driver);
+	if (wmi_supported)
+		wmi_driver_unregister(&dell_smbios_wmi_driver);
 }
 
 MODULE_DEVICE_TABLE(wmi, dell_smbios_wmi_id_table);
-- 
2.30.2

[PATCH 5.4 12/71] RDMA/uverbs: Fix a NULL vs IS_ERR() bug

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 463a3f66473b58d71428a1c3ce69ea52c05440e5 ]

The uapi_get_object() function returns error pointers, it never returns
NULL.

Fixes: 149d3845f4a5 ("RDMA/uverbs: Add a method to introspect handles in a context")
Link: https://lore.kernel.org/r/YJ6Got+U7lz+3n9a@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/uverbs_std_types_device.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/core/uverbs_std_types_device.c b/drivers/infiniband/core/uverbs_std_types_device.c
index 2a3f2f01028d..fd351bdec3f6 100644
--- a/drivers/infiniband/core/uverbs_std_types_device.c
+++ b/drivers/infiniband/core/uverbs_std_types_device.c
@@ -110,8 +110,8 @@ static int UVERBS_HANDLER(UVERBS_METHOD_INFO_HANDLES)(
 		return ret;
 
 	uapi_object = uapi_get_object(attrs->ufile->device->uapi, object_id);
-	if (!uapi_object)
-		return -EINVAL;
+	if (IS_ERR(uapi_object))
+		return PTR_ERR(uapi_object);
 
 	handles = gather_objects_handle(attrs->ufile, uapi_object, attrs,
 					out_len, &total);
-- 
2.30.2

[PATCH 5.4 13/71] ptrace: make ptrace() fail if the tracee changed its pid unexpectedly

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]

Suppose we have 2 threads, the group-leader L and a sub-theread T,
both parked in ptrace_stop(). Debugger tries to resume both threads
and does

	ptrace(PTRACE_CONT, T);
	ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not
resume the old leader L, it resumes the post-exec thread T which was
actually now stopped in PTHREAD_EVENT_EXEC. In this case the
PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the
tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait()
and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all
ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API,
and I _hope_ this won't cause any noticeable regression:

	- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec
	  and the tracer does a ptrace request without having consumed
	  the exec event, it's 100% sure that the thread the ptracer
	  thinks it is targeting does not exist anymore, or isn't the
	  same as the one it thinks it is targeting.

	- To some degree this patch adds nothing new. In the scenario
	  above ptrace(L) can fail with -ESRCH if it is called after the
	  execing sub-thread wakes the leader up and before it "steals"
	  the leader's pid.

Test-case:

	#include <stdio.h>
	#include <unistd.h>
	#include <signal.h>
	#include <sys/ptrace.h>
	#include <sys/wait.h>
	#include <errno.h>
	#include <pthread.h>
	#include <assert.h>

	void *tf(void *arg)
	{
		execve("/usr/bin/true", NULL, NULL);
		assert(0);

		return NULL;
	}

	int main(void)
	{
		int leader = fork();
		if (!leader) {
			kill(getpid(), SIGSTOP);

			pthread_t th;
			pthread_create(&th, NULL, tf, NULL);
			for (;;)
				pause();

			return 0;
		}

		waitpid(leader, NULL, WSTOPPED);

		ptrace(PTRACE_SEIZE, leader, 0,
				PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC);
		waitpid(leader, NULL, 0);

		ptrace(PTRACE_CONT, leader, 0,0);
		waitpid(leader, NULL, 0);

		int status, thread = waitpid(-1, &status, 0);
		assert(thread > 0 && thread != leader);
		assert(status == 0x80137f);

		ptrace(PTRACE_CONT, thread, 0,0);
		/*
		 * waitid() because waitpid(leader, &status, WNOWAIT) does not
		 * report status. Why ????
		 *
		 * Why WEXITED? because we have another kernel problem connected
		 * to mt-exec.
		 */
		siginfo_t info;
		assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0);
		assert(info.si_pid == leader && info.si_status == 0x0405);

		/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */
		assert(ptrace(PTRACE_CONT, leader, 0,0) == -1);
		assert(errno == ESRCH);

		assert(leader == waitpid(leader, &status, WNOHANG));
		assert(status == 0x04057f);

		assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

		return 0;
	}

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Pedro Alves <palves@redhat.com>
Acked-by: Simon Marchi <simon.marchi@efficios.com>
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/ptrace.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 79de1294f8eb..eb4d04cb3aaf 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -169,6 +169,21 @@ void __ptrace_unlink(struct task_struct *child)
 	spin_unlock(&child->sighand->siglock);
 }
 
+static bool looks_like_a_spurious_pid(struct task_struct *task)
+{
+	if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP))
+		return false;
+
+	if (task_pid_vnr(task) == task->ptrace_message)
+		return false;
+	/*
+	 * The tracee changed its pid but the PTRACE_EVENT_EXEC event
+	 * was not wait()'ed, most probably debugger targets the old
+	 * leader which was destroyed in de_thread().
+	 */
+	return true;
+}
+
 /* Ensure that nothing can wake it up, even SIGKILL */
 static bool ptrace_freeze_traced(struct task_struct *task)
 {
@@ -179,7 +194,8 @@ static bool ptrace_freeze_traced(struct task_struct *task)
 		return ret;
 
 	spin_lock_irq(&task->sighand->siglock);
-	if (task_is_traced(task) && !__fatal_signal_pending(task)) {
+	if (task_is_traced(task) && !looks_like_a_spurious_pid(task) &&
+	    !__fatal_signal_pending(task)) {
 		task->state = __TASK_TRACED;
 		ret = true;
 	}
-- 
2.30.2

[PATCH 5.4 14/71] nvmet: seset ns->file when open fails

[Greg Kroah-Hartman]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 85428beac80dbcace5b146b218697c73e367dcf5 ]

Reset the ns->file value to NULL also in the error case in
nvmet_file_ns_enable().

The ns->file variable points either to file object or contains the
error code after the filp_open() call. This can lead to following
problem:

When the user first setups an invalid file backend and tries to enable
the ns, it will fail. Then the user switches over to a bdev backend
and enables successfully the ns. The first received I/O will crash the
system because the IO backend is chosen based on the ns->file value:

static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
{
	[...]

	if (req->ns->file)
		return nvmet_file_parse_io_cmd(req);

	return nvmet_bdev_parse_io_cmd(req);
}

Reported-by: Enzo Matsumiya <ematsumiya@suse.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/io-cmd-file.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/io-cmd-file.c b/drivers/nvme/target/io-cmd-file.c
index 05453f5d1448..6ca17a0babae 100644
--- a/drivers/nvme/target/io-cmd-file.c
+++ b/drivers/nvme/target/io-cmd-file.c
@@ -38,9 +38,11 @@ int nvmet_file_ns_enable(struct nvmet_ns *ns)
 
 	ns->file = filp_open(ns->device_path, flags, 0);
 	if (IS_ERR(ns->file)) {
-		pr_err("failed to open file %s: (%ld)\n",
-				ns->device_path, PTR_ERR(ns->file));
-		return PTR_ERR(ns->file);
+		ret = PTR_ERR(ns->file);
+		pr_err("failed to open file %s: (%d)\n",
+			ns->device_path, ret);
+		ns->file = NULL;
+		return ret;
 	}
 
 	ret = vfs_getattr(&ns->file->f_path,
-- 
2.30.2

[PATCH 5.4 15/71] locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal

[Greg Kroah-Hartman]

From: Zqiang <qiang.zhang@windriver.com>

[ Upstream commit 3a010c493271f04578b133de977e0e5dd2848cea ]

When a interruptible mutex locker is interrupted by a signal
without acquiring this lock and removed from the wait queue.
if the mutex isn't contended enough to have a waiter
put into the wait queue again, the setting of the WAITER
bit will force mutex locker to go into the slowpath to
acquire the lock every time, so if the wait queue is empty,
the WAITER bit need to be clear.

Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/locking/mutex-debug.c |  4 ++--
 kernel/locking/mutex-debug.h |  2 +-
 kernel/locking/mutex.c       | 18 +++++++++++++-----
 kernel/locking/mutex.h       |  4 +---
 4 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
index 771d4ca96dda..4fe40910f471 100644
--- a/kernel/locking/mutex-debug.c
+++ b/kernel/locking/mutex-debug.c
@@ -57,7 +57,7 @@ void debug_mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 	task->blocked_on = waiter;
 }
 
-void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 			 struct task_struct *task)
 {
 	DEBUG_LOCKS_WARN_ON(list_empty(&waiter->list));
@@ -65,7 +65,7 @@ void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 	DEBUG_LOCKS_WARN_ON(task->blocked_on != waiter);
 	task->blocked_on = NULL;
 
-	list_del_init(&waiter->list);
+	INIT_LIST_HEAD(&waiter->list);
 	waiter->task = NULL;
 }
 
diff --git a/kernel/locking/mutex-debug.h b/kernel/locking/mutex-debug.h
index 1edd3f45a4ec..53e631e1d76d 100644
--- a/kernel/locking/mutex-debug.h
+++ b/kernel/locking/mutex-debug.h
@@ -22,7 +22,7 @@ extern void debug_mutex_free_waiter(struct mutex_waiter *waiter);
 extern void debug_mutex_add_waiter(struct mutex *lock,
 				   struct mutex_waiter *waiter,
 				   struct task_struct *task);
-extern void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
+extern void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 				struct task_struct *task);
 extern void debug_mutex_unlock(struct mutex *lock);
 extern void debug_mutex_init(struct mutex *lock, const char *name,
diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c
index 07a9f9f46e03..c0c7784f074b 100644
--- a/kernel/locking/mutex.c
+++ b/kernel/locking/mutex.c
@@ -204,7 +204,7 @@ static inline bool __mutex_waiter_is_first(struct mutex *lock, struct mutex_wait
  * Add @waiter to a given location in the lock wait_list and set the
  * FLAG_WAITERS flag if it's the first waiter.
  */
-static void __sched
+static void
 __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 		   struct list_head *list)
 {
@@ -215,6 +215,16 @@ __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter,
 		__mutex_set_flag(lock, MUTEX_FLAG_WAITERS);
 }
 
+static void
+__mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter)
+{
+	list_del(&waiter->list);
+	if (likely(list_empty(&lock->wait_list)))
+		__mutex_clear_flag(lock, MUTEX_FLAGS);
+
+	debug_mutex_remove_waiter(lock, waiter, current);
+}
+
 /*
  * Give up ownership to a specific task, when @task = NULL, this is equivalent
  * to a regular unlock. Sets PICKUP on a handoff, clears HANDOF, preserves
@@ -1071,9 +1081,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 			__ww_mutex_check_waiters(lock, ww_ctx);
 	}
 
-	mutex_remove_waiter(lock, &waiter, current);
-	if (likely(list_empty(&lock->wait_list)))
-		__mutex_clear_flag(lock, MUTEX_FLAGS);
+	__mutex_remove_waiter(lock, &waiter);
 
 	debug_mutex_free_waiter(&waiter);
 
@@ -1090,7 +1098,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 
 err:
 	__set_current_state(TASK_RUNNING);
-	mutex_remove_waiter(lock, &waiter, current);
+	__mutex_remove_waiter(lock, &waiter);
 err_early_kill:
 	spin_unlock(&lock->wait_lock);
 	debug_mutex_free_waiter(&waiter);
diff --git a/kernel/locking/mutex.h b/kernel/locking/mutex.h
index 1c2287d3fa71..f0c710b1d192 100644
--- a/kernel/locking/mutex.h
+++ b/kernel/locking/mutex.h
@@ -10,12 +10,10 @@
  * !CONFIG_DEBUG_MUTEXES case. Most of them are NOPs:
  */
 
-#define mutex_remove_waiter(lock, waiter, task) \
-		__list_del((waiter)->list.prev, (waiter)->list.next)
-
 #define debug_mutex_wake_waiter(lock, waiter)		do { } while (0)
 #define debug_mutex_free_waiter(waiter)			do { } while (0)
 #define debug_mutex_add_waiter(lock, waiter, ti)	do { } while (0)
+#define debug_mutex_remove_waiter(lock, waiter, ti)     do { } while (0)
 #define debug_mutex_unlock(lock)			do { } while (0)
 #define debug_mutex_init(lock, name, key)		do { } while (0)
 
-- 
2.30.2

[PATCH 5.4 16/71] btrfs: avoid RCU stalls while running delayed iputs

[Greg Kroah-Hartman]

From: Josef Bacik <josef@toxicpanda.com>

commit 71795ee590111e3636cc3c148289dfa9fa0a5fc3 upstream.

Generally a delayed iput is added when we might do the final iput, so
usually we'll end up sleeping while processing the delayed iputs
naturally.  However there's no guarantee of this, especially for small
files.  In production we noticed 5 instances of RCU stalls while testing
a kernel release overnight across 1000 machines, so this is relatively
common:

  host count: 5
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: ....: (20998 ticks this GP) idle=59e/1/0x4000000000000002 softirq=12333372/12333372 fqs=3208
   	(t=21031 jiffies g=27810193 q=41075) NMI backtrace for cpu 1
  CPU: 1 PID: 1713 Comm: btrfs-cleaner Kdump: loaded Not tainted 5.6.13-0_fbk12_rc1_5520_gec92bffc1ec9 #1
  Call Trace:
    <IRQ> dump_stack+0x50/0x70
    nmi_cpu_backtrace.cold.6+0x30/0x65
    ? lapic_can_unplug_cpu.cold.30+0x40/0x40
    nmi_trigger_cpumask_backtrace+0xba/0xca
    rcu_dump_cpu_stacks+0x99/0xc7
    rcu_sched_clock_irq.cold.90+0x1b2/0x3a3
    ? trigger_load_balance+0x5c/0x200
    ? tick_sched_do_timer+0x60/0x60
    ? tick_sched_do_timer+0x60/0x60
    update_process_times+0x24/0x50
    tick_sched_timer+0x37/0x70
    __hrtimer_run_queues+0xfe/0x270
    hrtimer_interrupt+0xf4/0x210
    smp_apic_timer_interrupt+0x5e/0x120
    apic_timer_interrupt+0xf/0x20 </IRQ>
   RIP: 0010:queued_spin_lock_slowpath+0x17d/0x1b0
   RSP: 0018:ffffc9000da5fe48 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
   RAX: 0000000000000000 RBX: ffff889fa81d0cd8 RCX: 0000000000000029
   RDX: ffff889fff86c0c0 RSI: 0000000000080000 RDI: ffff88bfc2da7200
   RBP: ffff888f2dcdd768 R08: 0000000001040000 R09: 0000000000000000
   R10: 0000000000000001 R11: ffffffff82a55560 R12: ffff88bfc2da7200
   R13: 0000000000000000 R14: ffff88bff6c2a360 R15: ffffffff814bd870
   ? kzalloc.constprop.57+0x30/0x30
   list_lru_add+0x5a/0x100
   inode_lru_list_add+0x20/0x40
   iput+0x1c1/0x1f0
   run_delayed_iput_locked+0x46/0x90
   btrfs_run_delayed_iputs+0x3f/0x60
   cleaner_kthread+0xf2/0x120
   kthread+0x10b/0x130

Fix this by adding a cond_resched_lock() to the loop processing delayed
iputs so we can avoid these sort of stalls.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/inode.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3571,6 +3571,7 @@ void btrfs_run_delayed_iputs(struct btrf
 		inode = list_first_entry(&fs_info->delayed_iputs,
 				struct btrfs_inode, delayed_iput);
 		run_delayed_iput_locked(fs_info, inode);
+		cond_resched_lock(&fs_info->delayed_iput_lock);
 	}
 	spin_unlock(&fs_info->delayed_iput_lock);
 }

[PATCH 5.4 17/71] cifs: fix memory leak in smb2_copychunk_range

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream.

When using smb2_copychunk_range() for large ranges we will
run through several iterations of a loop calling SMB2_ioctl()
but never actually free the returned buffer except for the final
iteration.
This leads to memory leaks everytime a large copychunk is requested.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/cifs/smb2ops.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1673,6 +1673,8 @@ smb2_copychunk_range(const unsigned int
 			cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));
 
 		/* Request server copy to target from src identified by key */
+		kfree(retbuf);
+		retbuf = NULL;
 		rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid,
 			trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE,
 			true /* is_fsctl */, (char *)pcchunk,

[PATCH 5.4 18/71] ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 4c6fe8c547e3c9e8c15dabdd23c569ee0df3adb1 upstream.

At high sampling transfer frequency, TC Electronic Konnekt Live
transfers/receives 6 audio data frames in multi bit linear audio data
channel of data block in CIP payload. Current hard-coded stream format
is wrong.

Cc: <stable@vger.kernel.org>
Fixes: f1f0f330b1d0 ("ALSA: dice: add parameters of stream formats for models produced by TC Electronic")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210518012612.37268-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/dice/dice-tcelectronic.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/firewire/dice/dice-tcelectronic.c
+++ b/sound/firewire/dice/dice-tcelectronic.c
@@ -38,8 +38,8 @@ static const struct dice_tc_spec konnekt
 };
 
 static const struct dice_tc_spec konnekt_live = {
-	.tx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
-	.rx_pcm_chs = {{16, 16, 16}, {0, 0, 0} },
+	.tx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
+	.rx_pcm_chs = {{16, 16, 6}, {0, 0, 0} },
 	.has_midi = true,
 };
 

[PATCH 5.4 19/71] ALSA: intel8x0: Dont update period unless prepared

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit c1f0616124c455c5c762b6f123e40bba5df759e6 upstream.

The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever
the hardware sets the corresponding status bit for each stream.  This
works fine for most cases as long as the hardware behaves properly.
But when the hardware gives a wrong bit set, this leads to a zero-
division Oops, and reportedly, this seems what happened on a VM.

For fixing the crash, this patch adds a internal flag indicating that
the stream is ready to be updated, and check it (as well as the flag
being in suspended) to ignore such spurious update.

Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/intel8x0.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -354,6 +354,7 @@ struct ichdev {
 	unsigned int ali_slot;			/* ALI DMA slot */
 	struct ac97_pcm *pcm;
 	int pcm_open_flag;
+	unsigned int prepared:1;
 	unsigned int suspended: 1;
 };
 
@@ -714,6 +715,9 @@ static inline void snd_intel8x0_update(s
 	int status, civ, i, step;
 	int ack = 0;
 
+	if (!ichdev->prepared || ichdev->suspended)
+		return;
+
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	status = igetbyte(chip, port + ichdev->roff_sr);
 	civ = igetbyte(chip, port + ICH_REG_OFF_CIV);
@@ -907,6 +911,7 @@ static int snd_intel8x0_hw_params(struct
 	if (ichdev->pcm_open_flag) {
 		snd_ac97_pcm_close(ichdev->pcm);
 		ichdev->pcm_open_flag = 0;
+		ichdev->prepared = 0;
 	}
 	err = snd_ac97_pcm_open(ichdev->pcm, params_rate(hw_params),
 				params_channels(hw_params),
@@ -928,6 +933,7 @@ static int snd_intel8x0_hw_free(struct s
 	if (ichdev->pcm_open_flag) {
 		snd_ac97_pcm_close(ichdev->pcm);
 		ichdev->pcm_open_flag = 0;
+		ichdev->prepared = 0;
 	}
 	return snd_pcm_lib_free_pages(substream);
 }
@@ -1002,6 +1008,7 @@ static int snd_intel8x0_pcm_prepare(stru
 			ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
 	}
 	snd_intel8x0_setup_periods(chip, ichdev);
+	ichdev->prepared = 1;
 	return 0;
 }
 

[PATCH 5.4 20/71] ALSA: line6: Fix racy initialization of LINE6 MIDI

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 05ca447630334c323c9e2b788b61133ab75d60d3 upstream.

The initialization of MIDI devices that are found on some LINE6
drivers are currently done in a racy way; namely, the MIDI buffer
instance is allocated and initialized in each private_init callback
while the communication with the interface is already started via
line6_init_cap_control() call before that point.  This may lead to
Oops in line6_data_received() when a spurious event is received, as
reported by syzkaller.

This patch moves the MIDI initialization to line6_init_cap_control()
as well instead of the too-lately-called private_init for avoiding the
race.  Also this reduces slightly more lines, so it's a win-win
change.

Reported-by: syzbot+0d2b3feb0a2887862e06@syzkallerlkml..appspotmail.com
Link: https://lore.kernel.org/r/000000000000a4be9405c28520de@google.com
Link: https://lore.kernel.org/r/20210517132725.GA50495@hyeyoo
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210518083939.1927-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/line6/driver.c |    4 ++++
 sound/usb/line6/pod.c    |    5 -----
 sound/usb/line6/variax.c |    6 ------
 3 files changed, 4 insertions(+), 11 deletions(-)

--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -690,6 +690,10 @@ static int line6_init_cap_control(struct
 		line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL);
 		if (!line6->buffer_message)
 			return -ENOMEM;
+
+		ret = line6_init_midi(line6);
+		if (ret < 0)
+			return ret;
 	} else {
 		ret = line6_hwdep_init(line6);
 		if (ret < 0)
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -376,11 +376,6 @@ static int pod_init(struct usb_line6 *li
 	if (err < 0)
 		return err;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(line6);
-	if (err < 0)
-		return err;
-
 	/* initialize PCM subsystem: */
 	err = line6_init_pcm(line6, &pod_pcm_properties);
 	if (err < 0)
--- a/sound/usb/line6/variax.c
+++ b/sound/usb/line6/variax.c
@@ -159,7 +159,6 @@ static int variax_init(struct usb_line6
 		       const struct usb_device_id *id)
 {
 	struct usb_line6_variax *variax = line6_to_variax(line6);
-	int err;
 
 	line6->process_message = line6_variax_process_message;
 	line6->disconnect = line6_variax_disconnect;
@@ -172,11 +171,6 @@ static int variax_init(struct usb_line6
 	if (variax->buffer_activate == NULL)
 		return -ENOMEM;
 
-	/* initialize MIDI subsystem: */
-	err = line6_init_midi(&variax->line6);
-	if (err < 0)
-		return err;
-
 	/* initiate startup procedure: */
 	schedule_delayed_work(&line6->startup_work,
 			      msecs_to_jiffies(VARIAX_STARTUP_DELAY1));

[PATCH 5.4 21/71] ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 1b6604896e78969baffc1b6cc6bc175f95929ac4 upstream.

Alesis iO 26 FireWire has two pairs of digital optical interface. It
delivers PCM frames from the interfaces by second isochronous packet
streaming. Although both of the interfaces are available at 44.1/48.0
kHz, first one of them is only available at 88.2/96.0 kHz. It reduces
the number of PCM samples to 4 in Multi Bit Linear Audio data channel
of data blocks on the second isochronous packet streaming.

This commit fixes hardcoded stream formats.

Cc: <stable@vger.kernel.org>
Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/dice/dice-alesis.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/dice/dice-alesis.c
+++ b/sound/firewire/dice/dice-alesis.c
@@ -16,7 +16,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_
 static const unsigned int
 alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = {
 	{10, 10, 4},	/* Tx0 = Analog + S/PDIF. */
-	{16, 8, 0},	/* Tx1 = ADAT1 + ADAT2. */
+	{16, 4, 0},	/* Tx1 = ADAT1 + ADAT2 (available at low rate). */
 };
 
 int snd_dice_detect_alesis_formats(struct snd_dice *dice)

[PATCH 5.4 22/71] ALSA: firewire-lib: fix calculation for size of IR context payload

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 1be4f21d9984fa9835fae5411a29465dc5aece6f upstream.

The quadlets for CIP header is handled as a part of IR context header,
thus it doesn't join in IR context payload. However current calculation
includes the quadlets in IR context payload.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -932,23 +932,22 @@ static int amdtp_stream_start(struct amd
 		s->ctx_data.rx.last_syt_offset = TICKS_PER_CYCLE;
 	}
 
-	/* initialize packet buffer */
+	// initialize packet buffer.
+	max_ctx_payload_size = amdtp_stream_get_max_payload(s);
 	if (s->direction == AMDTP_IN_STREAM) {
 		dir = DMA_FROM_DEVICE;
 		type = FW_ISO_CONTEXT_RECEIVE;
-		if (!(s->flags & CIP_NO_HEADER))
+		if (!(s->flags & CIP_NO_HEADER)) {
+			max_ctx_payload_size -= 8;
 			ctx_header_size = IR_CTX_HEADER_SIZE_CIP;
-		else
+		} else {
 			ctx_header_size = IR_CTX_HEADER_SIZE_NO_CIP;
-
-		max_ctx_payload_size = amdtp_stream_get_max_payload(s) -
-				       ctx_header_size;
+		}
 	} else {
 		dir = DMA_TO_DEVICE;
 		type = FW_ISO_CONTEXT_TRANSMIT;
 		ctx_header_size = 0;	// No effect for IT context.
 
-		max_ctx_payload_size = amdtp_stream_get_max_payload(s);
 		if (!(s->flags & CIP_NO_HEADER))
 			max_ctx_payload_size -= IT_PKT_HEADER_SIZE_CIP;
 	}

[PATCH 5.4 23/71] ALSA: usb-audio: Validate MS endpoint descriptors

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream.

snd_usbmidi_get_ms_info() may access beyond the border when a
malformed descriptor is passed.  This patch adds the sanity checks of
the given MS endpoint descriptors, and skips invalid ones.

Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/usb/midi.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -1889,8 +1889,12 @@ static int snd_usbmidi_get_ms_info(struc
 		ms_ep = find_usb_ms_endpoint_descriptor(hostep);
 		if (!ms_ep)
 			continue;
+		if (ms_ep->bLength <= sizeof(*ms_ep))
+			continue;
 		if (ms_ep->bNumEmbMIDIJack > 0x10)
 			continue;
+		if (ms_ep->bLength < sizeof(*ms_ep) + ms_ep->bNumEmbMIDIJack)
+			continue;
 		if (usb_endpoint_dir_out(ep)) {
 			if (endpoints[epidx].out_ep) {
 				if (++epidx >= MIDI_MAX_ENDPOINTS) {

[PATCH 5.4 24/71] ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 0edabdfe89581669609eaac5f6a8d0ae6fe95e7f upstream.

Mackie d.2 has an extension card for IEEE 1394 communication, which uses
BridgeCo DM1000 ASIC. On the other hand, Mackie d.4 Pro has built-in
function for IEEE 1394 communication by Oxford Semiconductor OXFW971,
according to schematic diagram available in Mackie website. Although I
misunderstood that Mackie d.2 Pro would be also a model with OXFW971,
it's wrong. Mackie d.2 Pro is a model which includes the extension card
as factory settings.

This commit fixes entries in Kconfig and comment in ALSA OXFW driver.

Cc: <stable@vger.kernel.org>
Fixes: fd6f4b0dc167 ("ALSA: bebob: Add skelton for BeBoB based devices")
Fixes: ec4dba5053e1 ("ALSA: oxfw: Add support for Behringer/Mackie devices")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/Kconfig       |    4 ++--
 sound/firewire/bebob/bebob.c |    2 +-
 sound/firewire/oxfw/oxfw.c   |    1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -38,7 +38,7 @@ config SND_OXFW
 	   * Mackie(Loud) Onyx 1640i (former model)
 	   * Mackie(Loud) Onyx Satellite
 	   * Mackie(Loud) Tapco Link.Firewire
-	   * Mackie(Loud) d.2 pro/d.4 pro
+	   * Mackie(Loud) d.4 pro
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 	   * Stanton Controllers & Systems 1 Deck/Mixer
@@ -84,7 +84,7 @@ config SND_BEBOB
 	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 	  * BridgeCo RDAudio1/Audio5
 	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
-	  * Mackie d.2 (FireWire Option)
+	  * Mackie d.2 (FireWire Option) and d.2 Pro
 	  * Stanton FinalScratch 2 (ScratchAmp)
 	  * Tascam IF-FW/DM
 	  * Behringer XENIX UFX 1204/1604
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -387,7 +387,7 @@ static const struct ieee1394_device_id b
 	SND_BEBOB_DEV_ENTRY(VEN_BRIDGECO, 0x00010049, &spec_normal),
 	/* Mackie, Onyx 1220/1620/1640 (Firewire I/O Card) */
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE2, 0x00010065, &spec_normal),
-	/* Mackie, d.2 (Firewire Option) */
+	// Mackie, d.2 (Firewire option card) and d.2 Pro (the card is built-in).
 	SND_BEBOB_DEV_ENTRY(VEN_MACKIE1, 0x00010067, &spec_normal),
 	/* Stanton, ScratchAmp */
 	SND_BEBOB_DEV_ENTRY(VEN_STANTON, 0x00000001, &spec_normal),
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -350,7 +350,6 @@ static const struct ieee1394_device_id o
 	 *  Onyx-i series (former models):	0x081216
 	 *  Mackie Onyx Satellite:		0x00200f
 	 *  Tapco LINK.firewire 4x6:		0x000460
-	 *  d.2 pro:				Unknown
 	 *  d.4 pro:				Unknown
 	 *  U.420:				Unknown
 	 *  U.420d:				Unknown

[PATCH 5.4 25/71] ALSA: hda: fixup headset for ASUS GU502 laptop

[Greg Kroah-Hartman]

From: Daniel Cordova A <danesc87@gmail.com>

commit c1b55029493879f5bd585ff79f326e71f0bc05e3 upstream.

The GU502 requires a few steps to make headset i/o works properly:
pincfg, verbs to unmute headphone out and callback to toggle output
between speakers and headphone using jack.

Signed-off-by: Daniel Cordova A <danesc87@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210507173116.12043-1-danesc87@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   62 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6120,6 +6120,35 @@ static void alc294_fixup_gx502_hp(struct
 	}
 }
 
+static void alc294_gu502_toggle_output(struct hda_codec *codec,
+				       struct hda_jack_callback *cb)
+{
+	/* Windows sets 0x10 to 0x8420 for Node 0x20 which is
+	 * responsible from changes between speakers and headphones
+	 */
+	if (snd_hda_jack_detect_state(codec, 0x21) == HDA_JACK_PRESENT)
+		alc_write_coef_idx(codec, 0x10, 0x8420);
+	else
+		alc_write_coef_idx(codec, 0x10, 0x0a20);
+}
+
+static void alc294_fixup_gu502_hp(struct hda_codec *codec,
+				  const struct hda_fixup *fix, int action)
+{
+	if (!is_jack_detectable(codec, 0x21))
+		return;
+
+	switch (action) {
+	case HDA_FIXUP_ACT_PRE_PROBE:
+		snd_hda_jack_detect_enable_callback(codec, 0x21,
+				alc294_gu502_toggle_output);
+		break;
+	case HDA_FIXUP_ACT_INIT:
+		alc294_gu502_toggle_output(codec, NULL);
+		break;
+	}
+}
+
 static void  alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec,
 			      const struct hda_fixup *fix, int action)
 {
@@ -6316,6 +6345,9 @@ enum {
 	ALC294_FIXUP_ASUS_GX502_HP,
 	ALC294_FIXUP_ASUS_GX502_PINS,
 	ALC294_FIXUP_ASUS_GX502_VERBS,
+	ALC294_FIXUP_ASUS_GU502_HP,
+	ALC294_FIXUP_ASUS_GU502_PINS,
+	ALC294_FIXUP_ASUS_GU502_VERBS,
 	ALC285_FIXUP_HP_GPIO_LED,
 	ALC285_FIXUP_HP_MUTE_LED,
 	ALC236_FIXUP_HP_MUTE_LED,
@@ -7540,6 +7572,35 @@ static const struct hda_fixup alc269_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc294_fixup_gx502_hp,
 	},
+	[ALC294_FIXUP_ASUS_GU502_PINS] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a11050 }, /* rear HP mic */
+			{ 0x1a, 0x01a11830 }, /* rear external mic */
+			{ 0x21, 0x012110f0 }, /* rear HP out */
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC294_FIXUP_ASUS_GU502_VERBS
+	},
+	[ALC294_FIXUP_ASUS_GU502_VERBS] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			/* set 0x15 to HP-OUT ctrl */
+			{ 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 },
+			/* unmute the 0x15 amp */
+			{ 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 },
+			/* set 0x1b to HP-OUT */
+			{ 0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC294_FIXUP_ASUS_GU502_HP
+	},
+	[ALC294_FIXUP_ASUS_GU502_HP] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc294_fixup_gu502_hp,
+	},
 	[ALC294_FIXUP_ASUS_COEF_1B] = {
 		.type = HDA_FIXUP_VERBS,
 		.v.verbs = (const struct hda_verb[]) {
@@ -7971,6 +8032,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC),
 	SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE),
 	SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502),
+	SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401),
 	SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),

[PATCH 5.4 26/71] Revert "ALSA: sb8: add a check for request_region"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 94f88309f201821073f57ae6005caefa61bf7b7e upstream.

This reverts commit dcd0feac9bab901d5739de51b3f69840851f8919.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit message for this change was incorrect as the code
path can never result in a NULL dereference, alluding to the fact that
whatever tool was used to "find this" is broken.  It's just an optional
resource reservation, so removing this check is fine.

Cc: Kangjie Lu <kjlu@umn.edu>
Acked-by: Takashi Iwai <tiwai@suse.de>
Fixes: dcd0feac9bab ("ALSA: sb8: add a check for request_region")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-35-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/isa/sb/sb8.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/sound/isa/sb/sb8.c
+++ b/sound/isa/sb/sb8.c
@@ -96,10 +96,6 @@ static int snd_sb8_probe(struct device *
 
 	/* block the 0x388 port to avoid PnP conflicts */
 	acard->fm_res = request_region(0x388, 4, "SoundBlaster FM");
-	if (!acard->fm_res) {
-		err = -EBUSY;
-		goto _err;
-	}
 
 	if (port[dev] != SNDRV_AUTO_PORT) {
 		if ((err = snd_sbdsp_create(card, port[dev], irq[dev],

[PATCH 5.4 27/71] ALSA: firewire-lib: fix check for the size of isochronous packet payload

[Greg Kroah-Hartman]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 395f41e2cdac63e7581fb9574e5ac0f02556e34a upstream.

The check for size of isochronous packet payload just cares of the size of
IR context payload without the size of CIP header.

Cc: <stable@vger.kernel.org>
Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/firewire/amdtp-stream.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/firewire/amdtp-stream.c
+++ b/sound/firewire/amdtp-stream.c
@@ -617,18 +617,24 @@ static int parse_ir_ctx_header(struct am
 			       unsigned int *syt, unsigned int index)
 {
 	const __be32 *cip_header;
+	unsigned int cip_header_size;
 	int err;
 
 	*payload_length = be32_to_cpu(ctx_header[0]) >> ISO_DATA_LENGTH_SHIFT;
-	if (*payload_length > s->ctx_data.tx.ctx_header_size +
-					s->ctx_data.tx.max_ctx_payload_length) {
+
+	if (!(s->flags & CIP_NO_HEADER))
+		cip_header_size = 8;
+	else
+		cip_header_size = 0;
+
+	if (*payload_length > cip_header_size + s->ctx_data.tx.max_ctx_payload_length) {
 		dev_err(&s->unit->device,
 			"Detect jumbo payload: %04x %04x\n",
-			*payload_length, s->ctx_data.tx.max_ctx_payload_length);
+			*payload_length, cip_header_size + s->ctx_data.tx.max_ctx_payload_length);
 		return -EIO;
 	}
 
-	if (!(s->flags & CIP_NO_HEADER)) {
+	if (cip_header_size > 0) {
 		cip_header = ctx_header + 2;
 		err = check_cip_header(s, cip_header, *payload_length,
 				       data_blocks, data_block_counter, syt);

[PATCH 5.4 28/71] ALSA: hda/realtek: reset eapd coeff to default value for alc287

[Greg Kroah-Hartman]

From: Hui Wang <hui.wang@canonical.com>

commit 8822702f6e4c8917c83ba79e0ebf2c8c218910d4 upstream.

Ubuntu users reported an audio bug on the Lenovo Yoga Slim 7 14IIL05,
he installed dual OS (Windows + Linux), if he booted to the Linux
from Windows, the Speaker can't work well, it has crackling noise,
if he poweroff the machine first after Windows, the Speaker worked
well.

Before rebooting or shutdown from Windows, the Windows changes the
codec eapd coeff value, but the BIOS doesn't re-initialize its value,
when booting into the Linux from Windows, the eapd coeff value is not
correct. To fix it, set the codec default value to that coeff register
in the alsa driver.

BugLink: http://bugs.launchpad.net/bugs/1925057
Suggested-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210507024452.8300-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -385,7 +385,6 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0282:
 	case 0x10ec0283:
 	case 0x10ec0286:
-	case 0x10ec0287:
 	case 0x10ec0288:
 	case 0x10ec0285:
 	case 0x10ec0298:
@@ -396,6 +395,10 @@ static void alc_fill_eapd_coef(struct hd
 	case 0x10ec0275:
 		alc_update_coef_idx(codec, 0xe, 0, 1<<0);
 		break;
+	case 0x10ec0287:
+		alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+		alc_write_coef_idx(codec, 0x8, 0x4ab7);
+		break;
 	case 0x10ec0293:
 		alc_update_coef_idx(codec, 0xa, 1<<13, 0);
 		break;

[PATCH 5.4 29/71] ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293

[Greg Kroah-Hartman]

From: PeiSen Hou <pshou@realtek.com>

commit 1d5cfca286178ce81fb0c8a5f5777ef123cd69e4 upstream.

Fix "use as headset mic, without its own jack detect" problen.

Signed-off-by: PeiSen Hou <pshou@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8092,12 +8092,19 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x50b8, "Clevo NK50SZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50d5, "Clevo NP50D5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50f0, "Clevo NH50A[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f2, "Clevo NH50E[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x50f3, "Clevo NH58DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f5, "Clevo NH55EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x50f6, "Clevo NH55DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x5101, "Clevo S510WU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x5157, "Clevo W517GU1", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x51a1, "Clevo NS50MU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x70a1, "Clevo NB70T[HJK]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x70b3, "Clevo NK70SB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f2, "Clevo NH79EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f3, "Clevo NH77DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
@@ -8115,9 +8122,17 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1558, 0x8a51, "Clevo NH70RCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x8d50, "Clevo NH55RCQ-M", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x951d, "Clevo N950T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0x9600, "Clevo N960K[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x961d, "Clevo N960S[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL53RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL5XNU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xb022, "Clevo NH77D[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
+	SND_PCI_QUIRK(0x1558, 0xc022, "Clevo NH77[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS),
 	SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),

[PATCH 5.4 30/71] ALSA: hda/realtek: Fix silent headphone output on ASUS UX430UA

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 8eedd3a70a70f51fa963f3ad7fa97afd0c75bd44 upstream.

It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.

This patch provides a fixup for the fixed DAC/pin mapping for this
device.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5608,6 +5608,18 @@ static void alc_fixup_tpt470_dacs(struct
 		spec->gen.preferred_dacs = preferred_pairs;
 }
 
+static void alc295_fixup_asus_dacs(struct hda_codec *codec,
+				   const struct hda_fixup *fix, int action)
+{
+	static const hda_nid_t preferred_pairs[] = {
+		0x17, 0x02, 0x21, 0x03, 0
+	};
+	struct alc_spec *spec = codec->spec;
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE)
+		spec->gen.preferred_dacs = preferred_pairs;
+}
+
 static void alc_shutup_dell_xps13(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -6377,6 +6389,7 @@ enum {
 	ALC274_FIXUP_HP_HEADSET_MIC,
 	ALC256_FIXUP_ASUS_HPE,
 	ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
+	ALC295_FIXUP_ASUS_DACS,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -7842,6 +7855,10 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_THINKPAD_ACPI
 	},
+	[ALC295_FIXUP_ASUS_DACS] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc295_fixup_asus_dacs,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8018,6 +8035,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_ASUS_ZENBOOK),
 	SND_PCI_QUIRK(0x1043, 0x1517, "Asus Zenbook UX31A", ALC269VB_FIXUP_ASUS_ZENBOOK_UX31A),
 	SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC),
+	SND_PCI_QUIRK(0x1043, 0x1740, "ASUS UX430UA", ALC295_FIXUP_ASUS_DACS),
 	SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK),
 	SND_PCI_QUIRK(0x1043, 0x1881, "ASUS Zephyrus S/M", ALC294_FIXUP_ASUS_GX502_PINS),
 	SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC),

[PATCH 5.4 31/71] ALSA: hda/realtek: Add fixup for HP OMEN laptop

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 5d84b5318d860c9d80ca5dfae0e971ede53b4921 upstream.

HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config
overrides and the existing mic/mute LED setup.  This patch implements
those in the fixup table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6390,6 +6390,7 @@ enum {
 	ALC256_FIXUP_ASUS_HPE,
 	ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
 	ALC295_FIXUP_ASUS_DACS,
+	ALC295_FIXUP_HP_OMEN,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -7859,6 +7860,26 @@ static const struct hda_fixup alc269_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc295_fixup_asus_dacs,
 	},
+	[ALC295_FIXUP_HP_OMEN] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x12, 0xb7a60130 },
+			{ 0x13, 0x40000000 },
+			{ 0x14, 0x411111f0 },
+			{ 0x16, 0x411111f0 },
+			{ 0x17, 0x90170110 },
+			{ 0x18, 0x411111f0 },
+			{ 0x19, 0x02a11030 },
+			{ 0x1a, 0x411111f0 },
+			{ 0x1b, 0x04a19030 },
+			{ 0x1d, 0x40600001 },
+			{ 0x1e, 0x411111f0 },
+			{ 0x21, 0x03211020 },
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8009,6 +8030,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE),
 	SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
@@ -8413,6 +8435,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"},
 	{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
 	{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
+	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
 	{}
 };
 #define ALC225_STANDARD_PINS \

[PATCH 5.4 32/71] ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx

[Greg Kroah-Hartman]

From: Elia Devito <eliadevito@gmail.com>

commit f2be77fee648ddd6d0d259d3527344ba0120e314 upstream.

Fixup to enable all 4 speaker on HP Spectre x360 15-df0xxx and probably
on similar models.

0x14 pin config override is required to enable all speakers and
alc285-speaker2-to-dac1 fixup to enable volume adjustment.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=189331
Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210511124651.4802-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/patch_realtek.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6391,6 +6391,7 @@ enum {
 	ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK,
 	ALC295_FIXUP_ASUS_DACS,
 	ALC295_FIXUP_HP_OMEN,
+	ALC285_FIXUP_HP_SPECTRE_X360,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -7880,6 +7881,15 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED,
 	},
+	[ALC285_FIXUP_HP_SPECTRE_X360] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x14, 0x90170110 }, /* enable top speaker */
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_SPEAKER2_TO_DAC1,
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -8032,6 +8042,7 @@ static const struct snd_pci_quirk alc269
 	SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3),
 	SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN),
 	SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3),
+	SND_PCI_QUIRK(0x103c, 0x8519, "HP Spectre x360 15-df0xxx", ALC285_FIXUP_HP_SPECTRE_X360),
 	SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED),
 	SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED),
 	SND_PCI_QUIRK(0x103c, 0x8729, "HP", ALC285_FIXUP_HP_GPIO_LED),
@@ -8436,6 +8447,7 @@ static const struct hda_model_fixup alc2
 	{.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"},
 	{.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"},
 	{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
+	{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
 	{}
 };
 #define ALC225_STANDARD_PINS \

[PATCH 5.4 33/71] uio_hv_generic: Fix a memory leak in error handling paths

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit 3ee098f96b8b6c1a98f7f97915f8873164e6af9d upstream.

If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be
updated and 'hv_uio_cleanup()' in the error handling path will not be
able to free the corresponding buffer.

In such a case, we need to free the buffer explicitly.

Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4fdaff557deef6f0475d02ba7922ddbaa1ab08a6.1620544055.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/uio/uio_hv_generic.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/uio/uio_hv_generic.c
+++ b/drivers/uio/uio_hv_generic.c
@@ -296,8 +296,10 @@ hv_uio_probe(struct hv_device *dev,
 
 	ret = vmbus_establish_gpadl(channel, pdata->recv_buf,
 				    RECV_BUFFER_SIZE, &pdata->recv_gpadl);
-	if (ret)
+	if (ret) {
+		vfree(pdata->recv_buf);
 		goto fail_close;
+	}
 
 	/* put Global Physical Address Label in name */
 	snprintf(pdata->recv_name, sizeof(pdata->recv_name),
@@ -316,8 +318,10 @@ hv_uio_probe(struct hv_device *dev,
 
 	ret = vmbus_establish_gpadl(channel, pdata->send_buf,
 				    SEND_BUFFER_SIZE, &pdata->send_gpadl);
-	if (ret)
+	if (ret) {
+		vfree(pdata->send_buf);
 		goto fail_close;
+	}
 
 	snprintf(pdata->send_name, sizeof(pdata->send_name),
 		 "send:%u", pdata->send_gpadl);

[PATCH 5.4 34/71] Revert "rapidio: fix a NULL pointer dereference when create_workqueue() fails"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e68b86c7b7c059c0f0ec4bf8adabe63f84a61eb upstream.

This reverts commit 23015b22e47c5409620b1726a677d69e5cd032ba.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit has a memory leak on the error path here, it does
not clean up everything properly.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 23015b22e47c ("rapidio: fix a NULL pointer dereference when create_workqueue() fails")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-45-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    8 --------
 1 file changed, 8 deletions(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2138,14 +2138,6 @@ static int riocm_add_mport(struct device
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
 	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
-	if (!cm->rx_wq) {
-		riocm_error("failed to allocate IBMBOX_%d on %s",
-			    cmbox, mport->name);
-		rio_release_outb_mbox(mport, cmbox);
-		kfree(cm);
-		return -ENOMEM;
-	}
-
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 5.4 35/71] rapidio: handle create_workqueue() failure

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream.

In case create_workqueue() fails, release all resources and return -ENOMEM
to caller to avoid potential NULL pointer deref later. Move up the
create_workequeue() call to return early and avoid unwinding the call to
riocm_rx_fill().

Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-46-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rapidio/rio_cm.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/rapidio/rio_cm.c
+++ b/drivers/rapidio/rio_cm.c
@@ -2127,6 +2127,14 @@ static int riocm_add_mport(struct device
 		return -ENODEV;
 	}
 
+	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
+	if (!cm->rx_wq) {
+		rio_release_inb_mbox(mport, cmbox);
+		rio_release_outb_mbox(mport, cmbox);
+		kfree(cm);
+		return -ENOMEM;
+	}
+
 	/*
 	 * Allocate and register inbound messaging buffers to be ready
 	 * to receive channel and system management requests
@@ -2137,7 +2145,6 @@ static int riocm_add_mport(struct device
 	cm->rx_slots = RIOCM_RX_RING_SIZE;
 	mutex_init(&cm->rx_lock);
 	riocm_rx_fill(cm, RIOCM_RX_RING_SIZE);
-	cm->rx_wq = create_workqueue(DRV_NAME "/rxq");
 	INIT_WORK(&cm->rx_work, rio_ibmsg_handler);
 
 	cm->tx_slot = 0;

[PATCH 5.4 36/71] Revert "serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 754f39158441f4c0d7a8255209dd9a939f08ce80 upstream.

This reverts commit 32f47179833b63de72427131169809065db6745e.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be not be needed at all as the
change was useless because this function can only be called when
of_match_device matched on something.  So it should be reverted.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: stable <stable@vger.kernel.org>
Fixes: 32f47179833b ("serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference")
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-6-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/mvebu-uart.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -818,9 +818,6 @@ static int mvebu_uart_probe(struct platf
 		return -EINVAL;
 	}
 
-	if (!match)
-		return -ENODEV;
-
 	/* Assume that all UART ports have a DT alias or none has */
 	id = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (!pdev->dev.of_node || id < 0)

[PATCH 5.4 37/71] drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang

[Greg Kroah-Hartman]

From: Changfeng <Changfeng.Zhu@amd.com>

commit dbd1003d1252db5973dddf20b24bb0106ac52aa2 upstream.

There is problem with 3DCGCG firmware and it will cause compute test
hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid
compute hang.

Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c |   10 +++++++---
 drivers/gpu/drm/amd/amdgpu/soc15.c    |    2 --
 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -4661,7 +4661,7 @@ static void gfx_v9_0_update_3d_clock_gat
 	amdgpu_gfx_rlc_enter_safe_mode(adev);
 
 	/* Enable 3D CGCG/CGLS */
-	if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)) {
+	if (enable) {
 		/* write cmd to clear cgcg/cgls ov */
 		def = data = RREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE);
 		/* unset CGCG override */
@@ -4673,8 +4673,12 @@ static void gfx_v9_0_update_3d_clock_gat
 		/* enable 3Dcgcg FSM(0x0000363f) */
 		def = RREG32_SOC15(GC, 0, mmRLC_CGCG_CGLS_CTRL_3D);
 
-		data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
-			RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+		if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)
+			data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) |
+				RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK;
+		else
+			data = 0x0 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT;
+
 		if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGLS)
 			data |= (0x000F << RLC_CGCG_CGLS_CTRL_3D__CGLS_REP_COMPANSAT_DELAY__SHIFT) |
 				RLC_CGCG_CGLS_CTRL_3D__CGLS_EN_MASK;
--- a/drivers/gpu/drm/amd/amdgpu/soc15.c
+++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
@@ -1132,7 +1132,6 @@ static int soc15_common_early_init(void
 			adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG |
 				AMD_CG_SUPPORT_GFX_MGLS |
 				AMD_CG_SUPPORT_GFX_CP_LS |
-				AMD_CG_SUPPORT_GFX_3D_CGCG |
 				AMD_CG_SUPPORT_GFX_3D_CGLS |
 				AMD_CG_SUPPORT_GFX_CGCG |
 				AMD_CG_SUPPORT_GFX_CGLS |
@@ -1152,7 +1151,6 @@ static int soc15_common_early_init(void
 				AMD_CG_SUPPORT_GFX_MGLS |
 				AMD_CG_SUPPORT_GFX_RLC_LS |
 				AMD_CG_SUPPORT_GFX_CP_LS |
-				AMD_CG_SUPPORT_GFX_3D_CGCG |
 				AMD_CG_SUPPORT_GFX_3D_CGLS |
 				AMD_CG_SUPPORT_GFX_CGCG |
 				AMD_CG_SUPPORT_GFX_CGLS |

[PATCH 5.4 38/71] drm/amdgpu: update gc golden setting for Navi12

[Greg Kroah-Hartman]

From: Guchun Chen <guchun.chen@amd.com>

commit 99c45ba5799d6b938bd9bd20edfeb6f3e3e039b9 upstream.

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c
@@ -190,9 +190,10 @@ static const struct soc15_reg_golden gol
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG, 0xffffffff, 0x20000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG2, 0xffffffff, 0x00000420),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG3, 0xffffffff, 0x00000200),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04800000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DEBUG4, 0xffffffff, 0x04900000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_DFSM_TILES_IN_FLIGHT, 0x0000ffff, 0x0000003f),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmDB_LAST_OF_BURST_CONFIG, 0xffffffff, 0x03860204),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGB_ADDR_CONFIG, 0x0c1800ff, 0x00000044),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGCR_GENERAL_CNTL, 0x1ff0ffff, 0x00000500),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGE_PRIV_CONTROL, 0x00007fff, 0x000001fe),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmGL1_PIPE_STEER, 0xffffffff, 0xe4e4e4e4),
@@ -210,12 +211,13 @@ static const struct soc15_reg_golden gol
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_ENHANCE_2, 0x00000820, 0x00000820),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmPA_SC_LINE_STIPPLE_STATE, 0x0000ff0f, 0x00000000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmRMI_SPARE, 0xffffffff, 0xffff3101),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSPI_CONFIG_CNTL_1, 0x001f0000, 0x00070104),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ALU_CLK_CTRL, 0xffffffff, 0xffffffff),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_ARB_CONFIG, 0x00000133, 0x00000130),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSQ_LDS_CLK_CTRL, 0xffffffff, 0xffffffff),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTA_CNTL_AUX, 0xfff7ffff, 0x01030000),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmTCP_CNTL, 0xffdf80ff, 0x479c0010),
-	SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00800000)
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmUTCL1_CTRL, 0xffffffff, 0x00c00000)
 };
 
 static const struct soc15_reg_golden golden_settings_gc_10_1_nv14[] =

[PATCH 5.4 39/71] drm/amdgpu: update sdma golden setting for Navi12

[Greg Kroah-Hartman]

From: Guchun Chen <guchun.chen@amd.com>

commit 77194d8642dd4cb7ea8ced77bfaea55610574c38 upstream.

Current golden setting is out of date.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c
@@ -100,6 +100,10 @@ static const struct soc15_reg_golden gol
 
 static const struct soc15_reg_golden golden_settings_sdma_nv12[] = {
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG, 0x001877ff, 0x00000044),
+	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044),
 	SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000),
 };
 

[PATCH 5.4 40/71] mmc: sdhci-pci-gli: increase 1.8V regulator wait

[Greg Kroah-Hartman]

From: Daniel Beer <dlbeer@gmail.com>

commit a1149a6c06ee094a6e62886b0c0e8e66967a728a upstream.

Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755)
results in the message:

    mmc0: 1.8V regulator output did not become stable

Following this message, some cards work (sometimes), but most cards fail
with EILSEQ. This behaviour is observed on Debian 10 running kernel
4.19.188, but also with 5.8.18 and 5.11.15.

The driver currently waits 5ms after switching on the 1.8V regulator for
it to become stable. Increasing this to 10ms gets rid of the warning
about stability, but most cards still fail. Increasing it to 20ms gets
some cards working (a 32GB Samsung micro SD works, a 128GB ADATA
doesn't). At 50ms, the ADATA works most of the time, and at 100ms both
cards work reliably.

Signed-off-by: Daniel Beer <dlbeer@gmail.com>
Acked-by: Ben Chuang <benchuanggli@gmail.com>
Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210424081652.GA16047@nyquist.nev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/host/sdhci-pci-gli.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -318,8 +318,13 @@ static void sdhci_gli_voltage_switch(str
 	 *
 	 * Wait 5ms after set 1.8V signal enable in Host Control 2 register
 	 * to ensure 1.8V signal enable bit is set by GL9750/GL9755.
+	 *
+	 * ...however, the controller in the NUC10i3FNK4 (a 9755) requires
+	 * slightly longer than 5ms before the control register reports that
+	 * 1.8V is ready, and far longer still before the card will actually
+	 * work reliably.
 	 */
-	usleep_range(5000, 5500);
+	usleep_range(100000, 110000);
 }
 
 static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask)

[PATCH 5.4 41/71] xen-pciback: reconfigure also from backend watch handler

[Greg Kroah-Hartman]

From: Jan Beulich <jbeulich@suse.com>

commit c81d3d24602540f65256f98831d0a25599ea6b87 upstream.

When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/xen/xen-pciback/xenbus.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -358,7 +358,8 @@ out:
 	return err;
 }
 
-static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev)
+static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev,
+				 enum xenbus_state state)
 {
 	int err = 0;
 	int num_devs;
@@ -372,9 +373,7 @@ static int xen_pcibk_reconfigure(struct
 	dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");
 
 	mutex_lock(&pdev->dev_lock);
-	/* Make sure we only reconfigure once */
-	if (xenbus_read_driver_state(pdev->xdev->nodename) !=
-	    XenbusStateReconfiguring)
+	if (xenbus_read_driver_state(pdev->xdev->nodename) != state)
 		goto out;
 
 	err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d",
@@ -499,6 +498,10 @@ static int xen_pcibk_reconfigure(struct
 		}
 	}
 
+	if (state != XenbusStateReconfiguring)
+		/* Make sure we only reconfigure once. */
+		goto out;
+
 	err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured);
 	if (err) {
 		xenbus_dev_fatal(pdev->xdev, err,
@@ -524,7 +527,7 @@ static void xen_pcibk_frontend_changed(s
 		break;
 
 	case XenbusStateReconfiguring:
-		xen_pcibk_reconfigure(pdev);
+		xen_pcibk_reconfigure(pdev, XenbusStateReconfiguring);
 		break;
 
 	case XenbusStateConnected:
@@ -663,6 +666,15 @@ static void xen_pcibk_be_watch(struct xe
 		xen_pcibk_setup_backend(pdev);
 		break;
 
+	case XenbusStateInitialised:
+		/*
+		 * We typically move to Initialised when the first device was
+		 * added. Hence subsequent devices getting added may need
+		 * reconfiguring.
+		 */
+		xen_pcibk_reconfigure(pdev, XenbusStateInitialised);
+		break;
+
 	default:
 		break;
 	}

[PATCH 5.4 42/71] dm snapshot: fix a crash when an origin has no snapshots

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 7ee06ddc4038f936b0d4459d37a7d4d844fb03db upstream.

If an origin target has no snapshots, o->split_boundary is set to 0.
This causes BUG_ON(sectors <= 0) in block/bio.c:bio_split().

Fix this by initializing chunk_size, and in turn split_boundary, to
rounddown_pow_of_two(UINT_MAX) -- the largest power of two that fits
into "unsigned" type.

Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -854,12 +854,11 @@ static int dm_add_exception(void *contex
 static uint32_t __minimum_chunk_size(struct origin *o)
 {
 	struct dm_snapshot *snap;
-	unsigned chunk_size = 0;
+	unsigned chunk_size = rounddown_pow_of_two(UINT_MAX);
 
 	if (o)
 		list_for_each_entry(snap, &o->snapshots, list)
-			chunk_size = min_not_zero(chunk_size,
-						  snap->store->chunk_size);
+			chunk_size = min(chunk_size, snap->store->chunk_size);
 
 	return (uint32_t) chunk_size;
 }

[PATCH 5.4 43/71] dm snapshot: fix crash with transient storage and zero chunk size

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit c699a0db2d62e3bbb7f0bf35c87edbc8d23e3062 upstream.

The following commands will crash the kernel:

modprobe brd rd_size=1048576
dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0"
dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"

The reason is that when we test for zero chunk size, we jump to the label
bad_read_metadata without setting the "r" variable. The function
snapshot_ctr destroys all the structures and then exits with "r == 0". The
kernel then crashes because it falsely believes that snapshot_ctr
succeeded.

In order to fix the bug, we set the variable "r" to -EINVAL.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/md/dm-snap.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -1407,6 +1407,7 @@ static int snapshot_ctr(struct dm_target
 
 	if (!s->store->chunk_size) {
 		ti->error = "Chunk size not set";
+		r = -EINVAL;
 		goto bad_read_metadata;
 	}
 

[PATCH 5.4 44/71] Revert "video: hgafb: fix potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 58c0cc2d90f1e37c4eb63ae7f164c83830833f78 upstream.

This reverts commit ec7f6aad57ad29e4e66cc2e18e1e1599ddb02542.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This patch "looks" correct, but the driver keeps on running and will
fail horribly right afterward if this error condition ever trips.

So points for trying to resolve an issue, but a huge NEGATIVE value for
providing a "fake" fix for the problem as nothing actually got resolved
at all.  I'll go fix this up properly...

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: ec7f6aad57ad ("video: hgafb: fix potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-39-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,8 +285,6 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
-	if (!hga_vram)
-		goto error;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;

[PATCH 5.4 45/71] Revert "net: stmicro: fix a missing check of clk_prepare"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bee1b0511844c8c79fccf1f2b13472393b6b91f7 upstream.

This reverts commit f86a3b83833e7cfe558ca4d70b64ebc48903efec.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit causes a memory leak when it is trying to claim it
is properly handling errors.  Revert this change and fix it up properly
in a follow-on commit.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -50,9 +50,7 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		ret = clk_prepare(gmac->tx_clk);
-		if (ret)
-			return ret;
+		clk_prepare(gmac->tx_clk);
 	}
 
 	return 0;

[PATCH 5.4 46/71] Revert "leds: lp5523: fix a missing check of return value of lp55xx_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d1beda5f11953ffe135a5213287f0b25b4da41b upstream.

This reverts commit 248b57015f35c94d4eae2fdd8c6febf5cd703900.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit does not properly unwind if there is an error
condition so it needs to be reverted at this point in time.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 248b57015f35 ("leds: lp5523: fix a missing check of return value of lp55xx_read")
Link: https://lore.kernel.org/r/20210503115736.2104747-9-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,9 +305,7 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
-	if (ret)
-		return ret;
+	lp55xx_read(chip, LP5523_REG_STATUS, &status);
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 5.4 47/71] Revert "hwmon: (lm80) fix a missing check of bus read in lm80 probe"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream.

This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all so
just revert it.  Also, the call to lm80_init_client() was not properly
handled, so if error handling is needed in the lm80_probe() function,
then it should be done properly, not half-baked like the commit being
reverted here did.

Cc: Kangjie Lu <kjlu@umn.edu>
Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe")
Cc: stable <stable@vger.kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/hwmon/lm80.c |   11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/hwmon/lm80.c
+++ b/drivers/hwmon/lm80.c
@@ -597,7 +597,6 @@ static int lm80_probe(struct i2c_client
 	struct device *dev = &client->dev;
 	struct device *hwmon_dev;
 	struct lm80_data *data;
-	int rv;
 
 	data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL);
 	if (!data)
@@ -610,14 +609,8 @@ static int lm80_probe(struct i2c_client
 	lm80_init_client(client);
 
 	/* A few vars need to be filled upon startup */
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(1));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][0] = rv;
-	rv = lm80_read_value(client, LM80_REG_FAN_MIN(2));
-	if (rv < 0)
-		return rv;
-	data->fan[f_min][1] = rv;
+	data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1));
+	data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 							   data, lm80_groups);

[PATCH 5.4 48/71] Revert "video: imsttfb: fix potential NULL pointer dereferences"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed04fe8a0e87d7b5ea17d47f4ac9ec962b24814a upstream.

This reverts commit 1d84353d205a953e2381044953b7fa31c8c9702d.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit here, while technically correct, did not fully
handle all of the reported issues that the commit stated it was fixing,
so revert it until it can be "fixed" fully.

Note, ioremap() probably will never fail for old hardware like this, and
if anyone actually used this hardware (a PowerMac era PCI display card),
they would not be using fbdev anymore.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Aditya Pakki <pakki001@umn.edu>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Fixes: 1d84353d205a ("video: imsttfb: fix potential NULL pointer dereferences")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-67-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/imsttfb.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/video/fbdev/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
@@ -1512,11 +1512,6 @@ static int imsttfb_probe(struct pci_dev
 	info->fix.smem_start = addr;
 	info->screen_base = (__u8 *)ioremap(addr, par->ramdac == IBM ?
 					    0x400000 : 0x800000);
-	if (!info->screen_base) {
-		release_mem_region(addr, size);
-		framebuffer_release(info);
-		return -ENOMEM;
-	}
 	info->fix.mmio_start = addr + 0x800000;
 	par->dc_regs = ioremap(addr + 0x800000, 0x1000);
 	par->cmap_regs_phys = addr + 0x840000;

[PATCH 5.4 49/71] Revert "ecryptfs: replace BUG_ON with error handling code"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e1436df2f2550bc89d832ffd456373fdf5d5b5d7 upstream.

This reverts commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit log for this change was incorrect, no "error
handling code" was added, things will blow up just as badly as before if
any of these cases ever were true.  As this BUG_ON() never fired, and
most of these checks are "obviously" never going to be true, let's just
revert to the original code for now until this gets unwound to be done
correctly in the future.

Cc: Aditya Pakki <pakki001@umn.edu>
Fixes: 2c2a7552dd64 ("ecryptfs: replace BUG_ON with error handling code")
Cc: stable <stable@vger.kernel.org>
Acked-by: Tyler Hicks <code@tyhicks.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-49-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ecryptfs/crypto.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -311,10 +311,8 @@ static int crypt_scatterlist(struct ecry
 	struct extent_crypt_result ecr;
 	int rc = 0;
 
-	if (!crypt_stat || !crypt_stat->tfm
-	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED))
-		return -EINVAL;
-
+	BUG_ON(!crypt_stat || !crypt_stat->tfm
+	       || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED));
 	if (unlikely(ecryptfs_verbosity > 0)) {
 		ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n",
 				crypt_stat->key_size);

[PATCH 5.4 50/71] Revert "scsi: ufs: fix a missing check of devm_reset_control_get"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4d427b408c4c2ff1676966c72119a3a559f8e39b upstream.

This reverts commit 63a06181d7ce169d09843645c50fea1901bc9f0a.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The original commit is incorrect, it does not properly clean up on the
error path, so I'll keep the revert and fix it up properly with a
follow-on patch.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Fixes: 63a06181d7ce ("scsi: ufs: fix a missing check of devm_reset_control_get")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-31-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs-hisi.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -482,10 +482,6 @@ static int ufs_hisi_init_common(struct u
 	ufshcd_set_variant(hba, host);
 
 	host->rst  = devm_reset_control_get(dev, "rst");
-	if (IS_ERR(host->rst)) {
-		dev_err(dev, "%s: failed to get reset control\n", __func__);
-		return PTR_ERR(host->rst);
-	}
 
 	ufs_hisi_set_pm_lvl(hba);
 

[PATCH 5.4 51/71] Revert "gdrom: fix a memory leak bug"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 257343d3ed557f11d580d0b7c515dc154f64a42b upstream.

This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

Because of this, all submissions from this group must be reverted from
the kernel tree and will need to be re-reviewed again to determine if
they actually are a valid fix.  Until that work is complete, remove this
change to ensure that no problems are being introduced into the
codebase.

Cc: Wenwen Wang <wang6495@umn.edu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -860,7 +860,6 @@ static void __exit exit_gdrom(void)
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
 	kfree(gd.toc);
-	kfree(gd.cd_info);
 }
 
 module_init(init_gdrom);

[PATCH 5.4 52/71] cdrom: gdrom: deallocate struct gdrom_unit fields in remove_gdrom

[Greg Kroah-Hartman]

From: Atul Gopinathan <atulgopinathan@gmail.com>

commit d03d1021da6fe7f46efe9f2a7335564e7c9db5ab upstream.

The fields, "toc" and "cd_info", of "struct gdrom_unit gd" are allocated
in "probe_gdrom()". Prevent a memory leak by making sure "gd.cd_info" is
deallocated in the "remove_gdrom()" function.

Also prevent double free of the field "gd.toc" by moving it from the
module's exit function to "remove_gdrom()". This is because, in
"probe_gdrom()", the function makes sure to deallocate "gd.toc" in case
of any errors, so the exit function invoked later would again free
"gd.toc".

The patch also maintains consistency by deallocating the above mentioned
fields in "remove_gdrom()" along with another memory allocated field
"gd.disk".

Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Peter Rosin <peda@axentia.se>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-28-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -828,6 +828,8 @@ static int remove_gdrom(struct platform_
 	if (gdrom_major)
 		unregister_blkdev(gdrom_major, GDROM_DEV_NAME);
 	unregister_cdrom(gd.cd_info);
+	kfree(gd.cd_info);
+	kfree(gd.toc);
 
 	return 0;
 }
@@ -859,7 +861,6 @@ static void __exit exit_gdrom(void)
 {
 	platform_device_unregister(pd);
 	platform_driver_unregister(&gdrom_driver);
-	kfree(gd.toc);
 }
 
 module_init(init_gdrom);

[PATCH 5.4 53/71] cdrom: gdrom: initialize global variable at init time

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9183f01b5e6e32eb3f17b5f3f8d5ad5ac9786c49 upstream.

As Peter points out, if we were to disconnect and then reconnect this
driver from a device, the "global" state of the device would contain odd
values and could cause problems.  Fix this up by just initializing the
whole thing to 0 at probe() time.

Ideally this would be a per-device variable, but given the age and the
total lack of users of it, that would require a lot of s/./->/g changes
for really no good reason.

Reported-by: Peter Rosin <peda@axentia.se>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cdrom/gdrom.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -740,6 +740,13 @@ static const struct blk_mq_ops gdrom_mq_
 static int probe_gdrom(struct platform_device *devptr)
 {
 	int err;
+
+	/*
+	 * Ensure our "one" device is initialized properly in case of previous
+	 * usages of it
+	 */
+	memset(&gd, 0, sizeof(gd));
+
 	/* Start the device */
 	if (gdrom_execute_diagnostic() != 1) {
 		pr_warning("ATA Probe for GDROM failed\n");
@@ -845,7 +852,7 @@ static struct platform_driver gdrom_driv
 static int __init init_gdrom(void)
 {
 	int rc;
-	gd.toc = NULL;
+
 	rc = platform_driver_register(&gdrom_driver);
 	if (rc)
 		return rc;

[PATCH 5.4 54/71] Revert "media: rcar_drif: fix a memory disclosure"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e465fc3846734e9489273d889f19cc17b4cf4bd upstream.

This reverts commit d39083234c60519724c6ed59509a2129fd2aed41.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: d39083234c60 ("media: rcar_drif: fix a memory disclosure")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/media/platform/rcar_drif.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/media/platform/rcar_drif.c
+++ b/drivers/media/platform/rcar_drif.c
@@ -911,7 +911,6 @@ static int rcar_drif_g_fmt_sdr_cap(struc
 {
 	struct rcar_drif_sdr *sdr = video_drvdata(file);
 
-	memset(f->fmt.sdr.reserved, 0, sizeof(f->fmt.sdr.reserved));
 	f->fmt.sdr.pixelformat = sdr->fmt->pixelformat;
 	f->fmt.sdr.buffersize = sdr->fmt->buffersize;
 

[PATCH 5.4 55/71] Revert "rtlwifi: fix a potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 68c5634c4a7278672a3bed00eb5646884257c413 upstream.

This reverts commit 765976285a8c8db3f0eb7f033829a899d0c2786e.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit is not correct, it should not have used unlikely() and is
not propagating the error properly to the calling function, so it should
be reverted at this point in time.  Also, if the check failed, the
work queue was still assumed to be allocated, so further accesses would
have continued to fail, meaning this patch does nothing to solve the
root issues at all.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |    5 -----
 1 file changed, 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -448,11 +448,6 @@ static void _rtl_init_deferred_work(stru
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
 	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
-	if (unlikely(!rtlpriv->works.rtl_wq)) {
-		pr_err("Failed to allocate work queue\n");
-		return;
-	}
-
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  (void *)rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,

[PATCH 5.4 56/71] Revert "qlcnic: Avoid potential NULL pointer dereference"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b95b57dfe7a142bf2446548eb7f49340fd73e78b upstream.

This reverts commit 5bf7295fe34a5251b1d241b9736af4697b590670.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

This commit does not properly detect if an error happens because the
logic after this loop will not detect that there was a failed
allocation.

Cc: Aditya Pakki <pakki001@umn.edu>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 5bf7295fe34a ("qlcnic: Avoid potential NULL pointer dereference")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-25-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1048,8 +1048,6 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
-		if (!skb)
-			break;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;

[PATCH 5.4 57/71] Revert "niu: fix missing checks of niu_pci_eeprom_read"

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7930742d6a0ff091c85b92ef4e076432d8d8cb79 upstream.

This reverts commit 26fd962bde0b15e54234fe762d86bc0349df1de4.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted.  It will be fixed up "correctly" in a
later kernel change.

The change here was incorrect.  While it is nice to check if
niu_pci_eeprom_read() succeeded or not when using the data, any error
that might have happened was not propagated upwards properly, causing
the kernel to assume that these reads were successful, which results in
invalid data in the buffer that was to contain the successfully read
data.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,8 +8097,6 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
-		if (prop_len < 0)
-			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8143,12 +8141,8 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++) {
-				err = niu_pci_eeprom_read(np, off + i);
-				if (err >= 0)
-					*prop_buf = err;
-				++prop_buf;
-			}
+			for (i = 0; i < prop_len; i++)
+				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
 		}
 
 		start += len;

[PATCH 5.4 58/71] ethernet: sun: niu: fix missing checks of niu_pci_eeprom_read()

[Greg Kroah-Hartman]

From: Du Cheng <ducheng2@gmail.com>

commit e6e337708c22f80824b82d4af645f20715730ad0 upstream.

niu_pci_eeprom_read() may fail, so add checks to its return value and
propagate the error up the callstack.

An examination of the callstack up to niu_pci_eeprom_read shows that:

niu_pci_eeprom_read() // returns int
    niu_pci_vpd_scan_props() // returns int
        niu_pci_vpd_fetch() // returns *void*
            niu_get_invariants() // returns int

since niu_pci_vpd_fetch() returns void which breaks the bubbling up,
change its return type to int so that error is propagated upwards.

Signed-off-by: Du Cheng <ducheng2@gmail.com>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-24-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/sun/niu.c |   34 ++++++++++++++++++++++++----------
 1 file changed, 24 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -8097,6 +8097,8 @@ static int niu_pci_vpd_scan_props(struct
 		start += 3;
 
 		prop_len = niu_pci_eeprom_read(np, start + 4);
+		if (prop_len < 0)
+			return prop_len;
 		err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64);
 		if (err < 0)
 			return err;
@@ -8141,8 +8143,12 @@ static int niu_pci_vpd_scan_props(struct
 			netif_printk(np, probe, KERN_DEBUG, np->dev,
 				     "VPD_SCAN: Reading in property [%s] len[%d]\n",
 				     namebuf, prop_len);
-			for (i = 0; i < prop_len; i++)
-				*prop_buf++ = niu_pci_eeprom_read(np, off + i);
+			for (i = 0; i < prop_len; i++) {
+				err =  niu_pci_eeprom_read(np, off + i);
+				if (err < 0)
+					return err;
+				*prop_buf++ = err;
+			}
 		}
 
 		start += len;
@@ -8152,14 +8158,14 @@ static int niu_pci_vpd_scan_props(struct
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
-static void niu_pci_vpd_fetch(struct niu *np, u32 start)
+static int niu_pci_vpd_fetch(struct niu *np, u32 start)
 {
 	u32 offset;
 	int err;
 
 	err = niu_pci_eeprom_read16_swp(np, start + 1);
 	if (err < 0)
-		return;
+		return err;
 
 	offset = err + 3;
 
@@ -8168,12 +8174,14 @@ static void niu_pci_vpd_fetch(struct niu
 		u32 end;
 
 		err = niu_pci_eeprom_read(np, here);
+		if (err < 0)
+			return err;
 		if (err != 0x90)
-			return;
+			return -EINVAL;
 
 		err = niu_pci_eeprom_read16_swp(np, here + 1);
 		if (err < 0)
-			return;
+			return err;
 
 		here = start + offset + 3;
 		end = start + offset + err;
@@ -8181,9 +8189,12 @@ static void niu_pci_vpd_fetch(struct niu
 		offset += err;
 
 		err = niu_pci_vpd_scan_props(np, here, end);
-		if (err < 0 || err == 1)
-			return;
+		if (err < 0)
+			return err;
+		if (err == 1)
+			return -EINVAL;
 	}
+	return 0;
 }
 
 /* ESPC_PIO_EN_ENABLE must be set */
@@ -9274,8 +9285,11 @@ static int niu_get_invariants(struct niu
 		offset = niu_pci_vpd_offset(np);
 		netif_printk(np, probe, KERN_DEBUG, np->dev,
 			     "%s() VPD offset [%08x]\n", __func__, offset);
-		if (offset)
-			niu_pci_vpd_fetch(np, offset);
+		if (offset) {
+			err = niu_pci_vpd_fetch(np, offset);
+			if (err < 0)
+				return err;
+		}
 		nw64(ESPC_PIO_EN, 0);
 
 		if (np->flags & NIU_FLAGS_VPD_VALID) {

[PATCH 5.4 59/71] net: stmicro: handle clk_prepare() failure during init

[Greg Kroah-Hartman]

From: Anirudh Rayabharam <mail@anirudhrb.com>

commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream.

In case clk_prepare() fails, capture and propagate the error code up the
stack. If regulator_enable() was called earlier, properly unwind it by
calling regulator_disable().

Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-22-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c
@@ -30,7 +30,7 @@ struct sunxi_priv_data {
 static int sun7i_gmac_init(struct platform_device *pdev, void *priv)
 {
 	struct sunxi_priv_data *gmac = priv;
-	int ret;
+	int ret = 0;
 
 	if (gmac->regulator) {
 		ret = regulator_enable(gmac->regulator);
@@ -50,10 +50,12 @@ static int sun7i_gmac_init(struct platfo
 		gmac->clk_enabled = 1;
 	} else {
 		clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE);
-		clk_prepare(gmac->tx_clk);
+		ret = clk_prepare(gmac->tx_clk);
+		if (ret && gmac->regulator)
+			regulator_disable(gmac->regulator);
 	}
 
-	return 0;
+	return ret;
 }
 
 static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)

[PATCH 5.4 60/71] scsi: ufs: handle cleanup correctly on devm_reset_control_get error

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit 2f4a784f40f8d337d6590e2e93f46429052e15ac upstream.

Move ufshcd_set_variant call in ufs_hisi_init_common to common error
section at end of the function, and then jump to this from the error
checking statements for both devm_reset_control_get and
ufs_hisi_get_resource. This fixes the original commit (63a06181d7ce)
which was reverted due to the University of Minnesota problems.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-32-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufs-hisi.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/scsi/ufs/ufs-hisi.c
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -481,17 +481,24 @@ static int ufs_hisi_init_common(struct u
 	host->hba = hba;
 	ufshcd_set_variant(hba, host);
 
-	host->rst  = devm_reset_control_get(dev, "rst");
+	host->rst = devm_reset_control_get(dev, "rst");
+	if (IS_ERR(host->rst)) {
+		dev_err(dev, "%s: failed to get reset control\n", __func__);
+		err = PTR_ERR(host->rst);
+		goto error;
+	}
 
 	ufs_hisi_set_pm_lvl(hba);
 
 	err = ufs_hisi_get_resource(host);
-	if (err) {
-		ufshcd_set_variant(hba, NULL);
-		return err;
-	}
+	if (err)
+		goto error;
 
 	return 0;
+
+error:
+	ufshcd_set_variant(hba, NULL);
+	return err;
 }
 
 static int ufs_hi3660_init(struct ufs_hba *hba)

[PATCH 5.4 61/71] net: rtlwifi: properly check for alloc_workqueue() failure

[Greg Kroah-Hartman]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 30b0e0ee9d02b97b68705c46b41444786effc40c upstream.

If alloc_workqueue() fails, properly catch this and propagate the error
to the calling functions, so that the devuce initialization will
properly error out.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Bryan Brattlof <hello@bryanbrattlof.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503115736.2104747-14-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/realtek/rtlwifi/base.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -436,9 +436,14 @@ static void _rtl_init_mac80211(struct ie
 	}
 }
 
-static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+static int _rtl_init_deferred_work(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct workqueue_struct *wq;
+
+	wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	if (!wq)
+		return -ENOMEM;
 
 	/* <1> timer */
 	timer_setup(&rtlpriv->works.watchdog_timer,
@@ -447,7 +452,8 @@ static void _rtl_init_deferred_work(stru
 		    rtl_easy_concurrent_retrytimer_callback, 0);
 	/* <2> work queue */
 	rtlpriv->works.hw = hw;
-	rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
+	rtlpriv->works.rtl_wq = wq;
+
 	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
 			  (void *)rtl_watchdog_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
@@ -460,6 +466,7 @@ static void _rtl_init_deferred_work(stru
 			  (void *)rtl_fwevt_wq_callback);
 	INIT_DELAYED_WORK(&rtlpriv->works.c2hcmd_wq,
 			  (void *)rtl_c2hcmd_wq_callback);
+	return 0;
 }
 
 void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq)
@@ -559,9 +566,7 @@ int rtl_init_core(struct ieee80211_hw *h
 	rtlmac->link_state = MAC80211_NOLINK;
 
 	/* <6> init deferred work */
-	_rtl_init_deferred_work(hw);
-
-	return 0;
+	return _rtl_init_deferred_work(hw);
 }
 EXPORT_SYMBOL_GPL(rtl_init_core);
 

[PATCH 5.4 62/71] ics932s401: fix broken handling of errors when word reading fails

[Greg Kroah-Hartman]

From: Darrick J. Wong <djwong@kernel.org>

commit a73b6a3b4109ce2ed01dbc51a6c1551a6431b53c upstream.

In commit b05ae01fdb89, someone tried to make the driver handle i2c read
errors by simply zeroing out the register contents, but for some reason
left unaltered the code that sets the cached register value the function
call return value.

The original patch was authored by a member of the Underhanded
Mangle-happy Nerds, I'm not terribly surprised.  I don't have the
hardware anymore so I can't test this, but it seems like a pretty
obvious API usage fix to me...

Fixes: b05ae01fdb89 ("misc/ics932s401: Add a missing check to i2c_smbus_read_word_data")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210428222534.GJ3122264@magnolia
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/misc/ics932s401.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/ics932s401.c
+++ b/drivers/misc/ics932s401.c
@@ -134,7 +134,7 @@ static struct ics932s401_data *ics932s40
 	for (i = 0; i < NUM_MIRRORED_REGS; i++) {
 		temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
 		if (temp < 0)
-			data->regs[regs_to_copy[i]] = 0;
+			temp = 0;
 		data->regs[regs_to_copy[i]] = temp >> 8;
 	}
 

[PATCH 5.4 63/71] leds: lp5523: check return value of lp5xx_read and jump to cleanup code

[Greg Kroah-Hartman]

From: Phillip Potter <phil@philpotter.co.uk>

commit 6647f7a06eb030a2384ec71f0bb2e78854afabfe upstream.

Check return value of lp5xx_read and if non-zero, jump to code at end of
the function, causing lp5523_stop_all_engines to be executed before
returning the error value up the call chain. This fixes the original
commit (248b57015f35) which was reverted due to the University of Minnesota
problems.

Cc: stable <stable@vger.kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210503115736.2104747-10-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/leds/leds-lp5523.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -305,7 +305,9 @@ static int lp5523_init_program_engine(st
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		goto out;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {

[PATCH 5.4 64/71] qlcnic: Add null check after calling netdev_alloc_skb

[Greg Kroah-Hartman]

From: Tom Seewald <tseewald@gmail.com>

commit 84460f01cba382553199bc1361f69a872d5abed4 upstream.

The function qlcnic_dl_lb_test() currently calls netdev_alloc_skb()
without checking afterwards that the allocation succeeded. Fix this by
checking if the skb is NULL and returning an error in such a case.
Breaking out of the loop if the skb is NULL is not correct as no error
would be reported to the caller and no message would be printed for the
user.

Cc: David S. Miller <davem@davemloft.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Tom Seewald <tseewald@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-26-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
@@ -1048,6 +1048,8 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 
 	for (i = 0; i < QLCNIC_NUM_ILB_PKT; i++) {
 		skb = netdev_alloc_skb(adapter->netdev, QLCNIC_ILB_PKT_SIZE);
+		if (!skb)
+			goto error;
 		qlcnic_create_loopback_buff(skb->data, adapter->mac_addr);
 		skb_put(skb, QLCNIC_ILB_PKT_SIZE);
 		adapter->ahw->diag_cnt = 0;
@@ -1071,6 +1073,7 @@ int qlcnic_do_lb_test(struct qlcnic_adap
 			cnt++;
 	}
 	if (cnt != i) {
+error:
 		dev_err(&adapter->pdev->dev,
 			"LB Test: failed, TX[%d], RX[%d]\n", i, cnt);
 		if (mode != QLCNIC_ILB_MODE)

[PATCH 5.4 65/71] video: hgafb: fix potential NULL pointer dereference

[Greg Kroah-Hartman]

From: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.

The return of ioremap if not checked, and can lead to a NULL to be
assigned to hga_vram. Potentially leading to a NULL pointer
dereference.

The fix adds code to deal with this case in the error label and
changes how the hgafb_probe handles the return of hga_card_detect.

Cc: Ferenc Bakonyi <fero@drama.obuda.kando.hu>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/fbdev/hgafb.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
@@ -285,6 +285,8 @@ static int hga_card_detect(void)
 	hga_vram_len  = 0x08000;
 
 	hga_vram = ioremap(0xb0000, hga_vram_len);
+	if (!hga_vram)
+		return -ENOMEM;
 
 	if (request_region(0x3b0, 12, "hgafb"))
 		release_io_ports = 1;
@@ -344,13 +346,18 @@ static int hga_card_detect(void)
 			hga_type_name = "Hercules";
 			break;
 	}
-	return 1;
+	return 0;
 error:
 	if (release_io_ports)
 		release_region(0x3b0, 12);
 	if (release_io_port)
 		release_region(0x3bf, 1);
-	return 0;
+
+	iounmap(hga_vram);
+
+	pr_err("hgafb: HGA card not detected.\n");
+
+	return -EINVAL;
 }
 
 /**
@@ -548,13 +555,11 @@ static struct fb_ops hgafb_ops = {
 static int hgafb_probe(struct platform_device *pdev)
 {
 	struct fb_info *info;
+	int ret;
 
-	if (! hga_card_detect()) {
-		printk(KERN_INFO "hgafb: HGA card not detected.\n");
-		if (hga_vram)
-			iounmap(hga_vram);
-		return -EINVAL;
-	}
+	ret = hga_card_detect();
+	if (!ret)
+		return ret;
 
 	printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n",
 		hga_type_name, hga_vram_len/1024);

[PATCH 5.4 66/71] vgacon: Record video mode changes with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit d4d0ad57b3865795c4cde2fb5094c594c2e8f469 upstream.

Fix an issue with VGA console font size changes made after the initial
video text mode has been changed with a user tool like `svgatextmode'
calling the VT_RESIZEX ioctl.  As it stands in that case the original
screen geometry continues being used to validate further VT resizing.

Consequently when the video adapter is firstly reprogrammed from the
original say 80x25 text mode using a 9x16 character cell (720x400 pixel
resolution) to say 80x37 text mode and the same character cell (720x592
pixel resolution), and secondly the CRTC character cell updated to 9x8
(by loading a suitable font with the KD_FONT_OP_SET request of the
KDFONTOP ioctl), the VT geometry does not get further updated from 80x37
and only upper half of the screen is used for the VT, with the lower
half showing rubbish corresponding to whatever happens to be there in
the video memory that maps to that part of the screen.  Of course the
proportions change according to text mode geometries and font sizes
chosen.

Address the problem then, by updating the text mode geometry defaults
rather than checking against them whenever the VT is resized via a user
ioctl.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: e400b6ec4ede ("vt/vgacon: Check if screen resize request comes from userspace")
Cc: stable@vger.kernel.org # v2.6.24+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/vgacon.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1106,12 +1106,20 @@ static int vgacon_resize(struct vc_data
 	if ((width << 1) * height > vga_vram_size)
 		return -EINVAL;
 
+	if (user) {
+		/*
+		 * Ho ho!  Someone (svgatextmode, eh?) may have reprogrammed
+		 * the video mode!  Set the new defaults then and go away.
+		 */
+		screen_info.orig_video_cols = width;
+		screen_info.orig_video_lines = height;
+		vga_default_font_height = c->vc_font.height;
+		return 0;
+	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
 	    c->vc_font.height)
-		/* let svgatextmode tinker with video timings and
-		   return success */
-		return (user) ? 0 : -EINVAL;
+		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
 		vgacon_doresize(c, width, height);

[PATCH 5.4 67/71] vt: Fix character height handling with VT_RESIZEX

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.


[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt_ioctl.c      |    6 ++---
 drivers/video/console/vgacon.c |   44 ++++++++++++++++++++---------------------
 include/linux/console_struct.h |    1 
 3 files changed, 26 insertions(+), 25 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -895,17 +895,17 @@ int vt_ioctl(struct tty_struct *tty,
 			if (vcp) {
 				int ret;
 				int save_scan_lines = vcp->vc_scan_lines;
-				int save_font_height = vcp->vc_font.height;
+				int save_cell_height = vcp->vc_cell_height;
 
 				if (v.v_vlin)
 					vcp->vc_scan_lines = v.v_vlin;
 				if (v.v_clin)
-					vcp->vc_font.height = v.v_clin;
+					vcp->vc_cell_height = v.v_clin;
 				vcp->vc_resize_user = 1;
 				ret = vc_resize(vcp, v.v_cols, v.v_rows);
 				if (ret) {
 					vcp->vc_scan_lines = save_scan_lines;
-					vcp->vc_font.height = save_font_height;
+					vcp->vc_cell_height = save_cell_height;
 					console_unlock();
 					return ret;
 				}
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -384,7 +384,7 @@ static void vgacon_init(struct vc_data *
 		vc_resize(c, vga_video_num_columns, vga_video_num_lines);
 
 	c->vc_scan_lines = vga_scan_lines;
-	c->vc_font.height = vga_video_font_height;
+	c->vc_font.height = c->vc_cell_height = vga_video_font_height;
 	c->vc_complement_mask = 0x7700;
 	if (vga_512_chars)
 		c->vc_hi_font_mask = 0x0800;
@@ -517,32 +517,32 @@ static void vgacon_cursor(struct vc_data
 		switch (c->vc_cursor_type & 0x0f) {
 		case CUR_UNDERLINE:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 2 : 3),
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_TWO_THIRDS:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_THIRD:
 			vgacon_set_cursor_size(c->vc_x,
-					       (c->vc_font.height * 2) / 3,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       (c->vc_cell_height * 2) / 3,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_LOWER_HALF:
 			vgacon_set_cursor_size(c->vc_x,
-					       c->vc_font.height / 2,
-					       c->vc_font.height -
-					       (c->vc_font.height <
+					       c->vc_cell_height / 2,
+					       c->vc_cell_height -
+					       (c->vc_cell_height <
 						10 ? 1 : 2));
 			break;
 		case CUR_NONE:
@@ -553,7 +553,7 @@ static void vgacon_cursor(struct vc_data
 			break;
 		default:
 			vgacon_set_cursor_size(c->vc_x, 1,
-					       c->vc_font.height);
+					       c->vc_cell_height);
 			break;
 		}
 		break;
@@ -564,13 +564,13 @@ static int vgacon_doresize(struct vc_dat
 		unsigned int width, unsigned int height)
 {
 	unsigned long flags;
-	unsigned int scanlines = height * c->vc_font.height;
+	unsigned int scanlines = height * c->vc_cell_height;
 	u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;
 
 	raw_spin_lock_irqsave(&vga_lock, flags);
 
 	vgacon_xres = width * VGA_FONTWIDTH;
-	vgacon_yres = height * c->vc_font.height;
+	vgacon_yres = height * c->vc_cell_height;
 	if (vga_video_type >= VIDEO_TYPE_VGAC) {
 		outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg);
 		max_scan = inb_p(vga_video_port_val);
@@ -625,9 +625,9 @@ static int vgacon_doresize(struct vc_dat
 static int vgacon_switch(struct vc_data *c)
 {
 	int x = c->vc_cols * VGA_FONTWIDTH;
-	int y = c->vc_rows * c->vc_font.height;
+	int y = c->vc_rows * c->vc_cell_height;
 	int rows = screen_info.orig_video_lines * vga_default_font_height/
-		c->vc_font.height;
+		c->vc_cell_height;
 	/*
 	 * We need to save screen size here as it's the only way
 	 * we can spot the screen has been resized and we need to
@@ -1058,7 +1058,7 @@ static int vgacon_adjust_height(struct v
 				cursor_size_lastto = 0;
 				c->vc_sw->con_cursor(c, CM_DRAW);
 			}
-			c->vc_font.height = fontheight;
+			c->vc_font.height = c->vc_cell_height = fontheight;
 			vc_resize(c, 0, rows);	/* Adjust console size */
 		}
 	}
@@ -1113,12 +1113,12 @@ static int vgacon_resize(struct vc_data
 		 */
 		screen_info.orig_video_cols = width;
 		screen_info.orig_video_lines = height;
-		vga_default_font_height = c->vc_font.height;
+		vga_default_font_height = c->vc_cell_height;
 		return 0;
 	}
 	if (width % 2 || width > screen_info.orig_video_cols ||
 	    height > (screen_info.orig_video_lines * vga_default_font_height)/
-	    c->vc_font.height)
+	    c->vc_cell_height)
 		return -EINVAL;
 
 	if (con_is_visible(c) && !vga_is_gfx) /* who knows */
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -62,6 +62,7 @@ struct vc_data {
 	unsigned int	vc_rows;
 	unsigned int	vc_size_row;		/* Bytes per row */
 	unsigned int	vc_scan_lines;		/* # of scan lines */
+	unsigned int	vc_cell_height;		/* CRTC character cell height */
 	unsigned long	vc_origin;		/* [!] Start of real screen */
 	unsigned long	vc_scr_end;		/* [!] End of real screen */
 	unsigned long	vc_visible_origin;	/* [!] Top of visible window */

[PATCH 5.4 68/71] tty: vt: always invoke vc->vc_sw->con_resize callback

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream.

syzbot is reporting OOB write at vga16fb_imageblit() [1], for
resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether
requested rows/columns fit the amount of memory reserved for the graphical
screen if current mode is KD_GRAPHICS.

----------
  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <sys/ioctl.h>
  #include <linux/kd.h>
  #include <linux/vt.h>

  int main(int argc, char *argv[])
  {
        const int fd = open("/dev/char/4:1", O_RDWR);
        struct vt_sizes vt = { 0x4100, 2 };

        ioctl(fd, KDSETMODE, KD_GRAPHICS);
        ioctl(fd, VT_RESIZE, &vt);
        ioctl(fd, KDSETMODE, KD_TEXT);
        return 0;
  }
----------

Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode !=
KD_GRAPHICS check from resize_screen() to fbcon_resize().

Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1]
Reported-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+1f29e126cf461c4de3b3@syzkaller.appspotmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/vt/vt.c              |    2 +-
 drivers/video/fbdev/core/fbcon.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1166,7 +1166,7 @@ static inline int resize_screen(struct v
 	/* Resizes the resolution of the display adapater */
 	int err = 0;
 
-	if (vc->vc_mode != KD_GRAPHICS && vc->vc_sw->con_resize)
+	if (vc->vc_sw->con_resize)
 		err = vc->vc_sw->con_resize(vc, width, height, user);
 
 	return err;
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2058,7 +2058,7 @@ static int fbcon_resize(struct vc_data *
 			return -EINVAL;
 
 		DPRINTK("resize now %ix%i\n", var.xres, var.yres);
-		if (con_is_visible(vc)) {
+		if (con_is_visible(vc) && vc->vc_mode == KD_TEXT) {
 			var.activate = FB_ACTIVATE_NOW |
 				FB_ACTIVATE_FORCE;
 			fb_set_var(info, &var);

[PATCH 5.4 69/71] nvme-multipath: fix double initialization of ANA state

[Greg Kroah-Hartman]

From: Christoph Hellwig <hch@lst.de>

commit 5e1f689913a4498e3081093670ef9d85b2c60920 upstream.

nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields.  Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.

Fixes: 0d0b660f214d ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/nvme/host/core.c      |    3 +-
 drivers/nvme/host/multipath.c |   55 ++++++++++++++++++++++--------------------
 drivers/nvme/host/nvme.h      |    8 ++++--
 3 files changed, 37 insertions(+), 29 deletions(-)

--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2904,7 +2904,7 @@ int nvme_init_identify(struct nvme_ctrl
 		ctrl->hmmaxd = le16_to_cpu(id->hmmaxd);
 	}
 
-	ret = nvme_mpath_init(ctrl, id);
+	ret = nvme_mpath_init_identify(ctrl, id);
 	kfree(id);
 
 	if (ret < 0)
@@ -4145,6 +4145,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctr
 		min(default_ps_max_latency_us, (unsigned long)S32_MAX));
 
 	nvme_fault_inject_init(&ctrl->fault_inject, dev_name(ctrl->device));
+	nvme_mpath_init_ctrl(ctrl);
 
 	return 0;
 out_free_name:
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -718,9 +718,18 @@ void nvme_mpath_remove_disk(struct nvme_
 	put_disk(head->disk);
 }
 
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
 {
-	int error;
+	mutex_init(&ctrl->ana_lock);
+	timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
+	INIT_WORK(&ctrl->ana_work, nvme_ana_work);
+}
+
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
+{
+	size_t max_transfer_size = ctrl->max_hw_sectors << SECTOR_SHIFT;
+	size_t ana_log_size;
+	int error = 0;
 
 	/* check if multipath is enabled and we have the capability */
 	if (!multipath || !ctrl->subsys || !(ctrl->subsys->cmic & (1 << 3)))
@@ -731,37 +740,31 @@ int nvme_mpath_init(struct nvme_ctrl *ct
 	ctrl->nanagrpid = le32_to_cpu(id->nanagrpid);
 	ctrl->anagrpmax = le32_to_cpu(id->anagrpmax);
 
-	mutex_init(&ctrl->ana_lock);
-	timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0);
-	ctrl->ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
-		ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc);
-	ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32);
-
-	if (ctrl->ana_log_size > ctrl->max_hw_sectors << SECTOR_SHIFT) {
+	ana_log_size = sizeof(struct nvme_ana_rsp_hdr) +
+		ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc) +
+		ctrl->max_namespaces * sizeof(__le32);
+	if (ana_log_size > max_transfer_size) {
 		dev_err(ctrl->device,
-			"ANA log page size (%zd) larger than MDTS (%d).\n",
-			ctrl->ana_log_size,
-			ctrl->max_hw_sectors << SECTOR_SHIFT);
+			"ANA log page size (%zd) larger than MDTS (%zd).\n",
+			ana_log_size, max_transfer_size);
 		dev_err(ctrl->device, "disabling ANA support.\n");
-		return 0;
+		goto out_uninit;
 	}
-
-	INIT_WORK(&ctrl->ana_work, nvme_ana_work);
-	kfree(ctrl->ana_log_buf);
-	ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
-	if (!ctrl->ana_log_buf) {
-		error = -ENOMEM;
-		goto out;
+	if (ana_log_size > ctrl->ana_log_size) {
+		nvme_mpath_stop(ctrl);
+		kfree(ctrl->ana_log_buf);
+		ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL);
+		if (!ctrl->ana_log_buf)
+			return -ENOMEM;
 	}
-
+	ctrl->ana_log_size = ana_log_size;
 	error = nvme_read_ana_log(ctrl);
 	if (error)
-		goto out_free_ana_log_buf;
+		goto out_uninit;
 	return 0;
-out_free_ana_log_buf:
-	kfree(ctrl->ana_log_buf);
-	ctrl->ana_log_buf = NULL;
-out:
+
+out_uninit:
+	nvme_mpath_uninit(ctrl);
 	return error;
 }
 
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -549,7 +549,8 @@ void nvme_kick_requeue_lists(struct nvme
 int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head);
 void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id);
 void nvme_mpath_remove_disk(struct nvme_ns_head *head);
-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id);
+void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl);
 void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
 void nvme_mpath_stop(struct nvme_ctrl *ctrl);
 bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
@@ -636,7 +637,10 @@ static inline void nvme_trace_bio_comple
         blk_status_t status)
 {
 }
-static inline int nvme_mpath_init(struct nvme_ctrl *ctrl,
+static inline void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl)
+{
+}
+static inline int nvme_mpath_init_identify(struct nvme_ctrl *ctrl,
 		struct nvme_id_ctrl *id)
 {
 	if (ctrl->subsys->cmic & (1 << 3))

[PATCH 5.4 70/71] ext4: fix error handling in ext4_end_enable_verity()

[Greg Kroah-Hartman]

From: Eric Biggers <ebiggers@google.com>

commit f053cf7aa66cd9d592b0fc967f4d887c2abff1b7 upstream.

ext4 didn't properly clean up if verity failed to be enabled on a file:

- It left verity metadata (pages past EOF) in the page cache, which
  would be exposed to userspace if the file was later extended.

- It didn't truncate the verity metadata at all (either from cache or
  from disk) if an error occurred while setting the verity bit.

Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths.  Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.

Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes: c93d8f885809 ("ext4: add basic fs-verity support")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210302200420.137977-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ext4/verity.c |   93 +++++++++++++++++++++++++++++++++----------------------
 1 file changed, 57 insertions(+), 36 deletions(-)

--- a/fs/ext4/verity.c
+++ b/fs/ext4/verity.c
@@ -198,55 +198,76 @@ static int ext4_end_enable_verity(struct
 	struct inode *inode = file_inode(filp);
 	const int credits = 2; /* superblock and inode for ext4_orphan_del() */
 	handle_t *handle;
+	struct ext4_iloc iloc;
 	int err = 0;
-	int err2;
 
-	if (desc != NULL) {
-		/* Succeeded; write the verity descriptor. */
-		err = ext4_write_verity_descriptor(inode, desc, desc_size,
-						   merkle_tree_size);
-
-		/* Write all pages before clearing VERITY_IN_PROGRESS. */
-		if (!err)
-			err = filemap_write_and_wait(inode->i_mapping);
-	}
+	/*
+	 * If an error already occurred (which fs/verity/ signals by passing
+	 * desc == NULL), then only clean-up is needed.
+	 */
+	if (desc == NULL)
+		goto cleanup;
 
-	/* If we failed, truncate anything we wrote past i_size. */
-	if (desc == NULL || err)
-		ext4_truncate(inode);
+	/* Append the verity descriptor. */
+	err = ext4_write_verity_descriptor(inode, desc, desc_size,
+					   merkle_tree_size);
+	if (err)
+		goto cleanup;
 
 	/*
-	 * We must always clean up by clearing EXT4_STATE_VERITY_IN_PROGRESS and
-	 * deleting the inode from the orphan list, even if something failed.
-	 * If everything succeeded, we'll also set the verity bit in the same
-	 * transaction.
+	 * Write all pages (both data and verity metadata).  Note that this must
+	 * happen before clearing EXT4_STATE_VERITY_IN_PROGRESS; otherwise pages
+	 * beyond i_size won't be written properly.  For crash consistency, this
+	 * also must happen before the verity inode flag gets persisted.
 	 */
+	err = filemap_write_and_wait(inode->i_mapping);
+	if (err)
+		goto cleanup;
 
-	ext4_clear_inode_state(inode, EXT4_STATE_VERITY_IN_PROGRESS);
+	/*
+	 * Finally, set the verity inode flag and remove the inode from the
+	 * orphan list (in a single transaction).
+	 */
 
 	handle = ext4_journal_start(inode, EXT4_HT_INODE, credits);
 	if (IS_ERR(handle)) {
-		ext4_orphan_del(NULL, inode);
-		return PTR_ERR(handle);
+		err = PTR_ERR(handle);
+		goto cleanup;
 	}
 
-	err2 = ext4_orphan_del(handle, inode);
-	if (err2)
-		goto out_stop;
-
-	if (desc != NULL && !err) {
-		struct ext4_iloc iloc;
-
-		err = ext4_reserve_inode_write(handle, inode, &iloc);
-		if (err)
-			goto out_stop;
-		ext4_set_inode_flag(inode, EXT4_INODE_VERITY);
-		ext4_set_inode_flags(inode);
-		err = ext4_mark_iloc_dirty(handle, inode, &iloc);
-	}
-out_stop:
+	err = ext4_orphan_del(handle, inode);
+	if (err)
+		goto stop_and_cleanup;
+
+	err = ext4_reserve_inode_write(handle, inode, &iloc);
+	if (err)
+		goto stop_and_cleanup;
+
+	ext4_set_inode_flag(inode, EXT4_INODE_VERITY);
+	ext4_set_inode_flags(inode);
+	err = ext4_mark_iloc_dirty(handle, inode, &iloc);
+	if (err)
+		goto stop_and_cleanup;
+
 	ext4_journal_stop(handle);
-	return err ?: err2;
+
+	ext4_clear_inode_state(inode, EXT4_STATE_VERITY_IN_PROGRESS);
+	return 0;
+
+stop_and_cleanup:
+	ext4_journal_stop(handle);
+cleanup:
+	/*
+	 * Verity failed to be enabled, so clean up by truncating any verity
+	 * metadata that was written beyond i_size (both from cache and from
+	 * disk), removing the inode from the orphan list (if it wasn't done
+	 * already), and clearing EXT4_STATE_VERITY_IN_PROGRESS.
+	 */
+	truncate_inode_pages(inode->i_mapping, inode->i_size);
+	ext4_truncate(inode);
+	ext4_orphan_del(NULL, inode);
+	ext4_clear_inode_state(inode, EXT4_STATE_VERITY_IN_PROGRESS);
+	return err;
 }
 
 static int ext4_get_verity_descriptor_location(struct inode *inode,

[PATCH 5.4 71/71] Bluetooth: L2CAP: Fix handling LE modes by L2CAP_OPTIONS

[Greg Kroah-Hartman]

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

commit b86b0b150fed840c376145383ef5105116c81b0c upstream.

L2CAP_OPTIONS shall only be used with BR/EDR modes.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bluetooth/l2cap_sock.c |   24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -426,6 +426,20 @@ static int l2cap_sock_getsockopt_old(str
 			break;
 		}
 
+		/* Only BR/EDR modes are supported here */
+		switch (chan->mode) {
+		case L2CAP_MODE_BASIC:
+		case L2CAP_MODE_ERTM:
+		case L2CAP_MODE_STREAMING:
+			break;
+		default:
+			err = -EINVAL;
+			break;
+		}
+
+		if (err < 0)
+			break;
+
 		memset(&opts, 0, sizeof(opts));
 		opts.imtu     = chan->imtu;
 		opts.omtu     = chan->omtu;
@@ -685,10 +699,8 @@ static int l2cap_sock_setsockopt_old(str
 			break;
 		}
 
-		chan->mode = opts.mode;
-		switch (chan->mode) {
-		case L2CAP_MODE_LE_FLOWCTL:
-			break;
+		/* Only BR/EDR modes are supported here */
+		switch (opts.mode) {
 		case L2CAP_MODE_BASIC:
 			clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
 			break;
@@ -702,6 +714,10 @@ static int l2cap_sock_setsockopt_old(str
 			break;
 		}
 
+		if (err < 0)
+			break;
+
+		chan->mode = opts.mode;
 		chan->imtu = opts.imtu;
 		chan->omtu = opts.omtu;
 		chan->fcs  = opts.fcs;

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Florian Fainelli]

On 5/24/21 8:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.122-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Shuah Khan]

On 5/24/21 9:25 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.122-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Naresh Kamboju]

On Mon, 24 May 2021 at 21:09, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.122-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.122-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.4.y
* git commit: ee309f4d11991b6f668fee11d74ed92c3a988f6e
* git describe: v5.4.121-72-gee309f4d1199
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.121-72-gee309f4d1199

## No regressions (compared to v5.4.120-38-gd1968aee6ca9)

## No fixes (compared to v5.4.120-38-gd1968aee6ca9)

## Test result summary
 total: 73972, pass: 60259, fail: 1356, skip: 11662, xfail: 695,

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 192 total, 192 passed, 0 failed
* arm64: 26 total, 26 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 15 total, 15 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 45 total, 45 passed, 0 failed
* parisc: 9 total, 9 passed, 0 failed
* powerpc: 27 total, 27 passed, 0 failed
* riscv: 21 total, 21 passed, 0 failed
* s390: 9 total, 9 passed, 0 failed
* sh: 18 total, 18 passed, 0 failed
* sparc: 9 total, 9 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 26 total, 26 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* install-android-platform-tools-r2600
* kselftest-android
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Sudip Mukherjee]

Hi Greg,

On Mon, May 24, 2021 at 05:25:06PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.

Build test:
mips (gcc version 11.1.1 20210523): 65 configs -> no failure
arm (gcc version 11.1.1 20210523): 107 configs -> no new failure
arm64 (gcc version 11.1.1 20210523): 2 configs -> no failure
x86_64 (gcc version 10.2.1 20210110): 2 configs -> no failure

Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression.


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

--
Regards
Sudip

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Guenter Roeck]

On Mon, May 24, 2021 at 05:25:06PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> greg k-h
> 
> Christoph Hellwig <hch@lst.de>
>     nvme-multipath: fix double initialization of ANA state
> 
This patch was later fixed with commit commit e181811bd04d ("nvmet: use
new ana_log_size instead the old one").

Guenter

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Greg Kroah-Hartman]

On Tue, May 25, 2021 at 11:28:36AM -0700, Guenter Roeck wrote:
> On Mon, May 24, 2021 at 05:25:06PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.4.122 release.
> > There are 71 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> > Anything received after that time might be too late.
> > 
> > greg k-h
> > 
> > Christoph Hellwig <hch@lst.de>
> >     nvme-multipath: fix double initialization of ANA state
> > 
> This patch was later fixed with commit commit e181811bd04d ("nvmet: use
> new ana_log_size instead the old one").

Argh, I thought I ran my script to catch these, I wonder what went
wrong.

Hm, my script caught it, no idea how I missed it on my end, my fault.
Thanks for pointing this out, now queued up.

greg k-h

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Guenter Roeck]

On Mon, May 24, 2021 at 05:25:06PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 428 pass: 427 fail: 1
Failed tests:
	riscv:virt:defconfig:net,usb-ohci:nvme:rootfs

The failure is persistent; it manifests itself in failure to reboot.
The test passes after applying commit e181811bd04d ("nvmet: use new
ana_log_size instead the old one").

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/71] 5.4.122-rc1 review

[Samuel Zou]

On 2021/5/24 23:25, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.122 release.
> There are 71 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 26 May 2021 15:23:11 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.122-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Tested on arm64 and x86 for 5.4.122-rc1,

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.122-rc1
Commit: ee309f4d11991b6f668fee11d74ed92c3a988f6e
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8895
passed: 8895
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 8895
passed: 8895
failed: 0
timeout: 0
--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>