linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pratyush Yadav <p.yadav@ti.com>
To: <patrice.chotard@foss.st.com>
Cc: Mark Brown <broonie@kernel.org>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	<linux-mtd@lists.infradead.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	<linux-spi@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <christophe.kerello@foss.st.com>
Subject: Re: [PATCH v3 3/3] mtd: spinand: add SPI-NAND MTD resume handler
Date: Fri, 28 May 2021 17:35:10 +0530	[thread overview]
Message-ID: <20210528120508.f6viglv3gkzgweqq@ti.com> (raw)
In-Reply-To: <20210527161252.16620-4-patrice.chotard@foss.st.com>

On 27/05/21 06:12PM, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
> 
> After power up, all SPI NAND's blocks are locked. Only read operations
> are allowed, write and erase operations are forbidden.
> The SPI NAND framework unlocks all the blocks during its initialization.
> 
> During a standby low power, the memory is powered down, losing its
> configuration.
> During the resume, the QSPI driver state is restored but the SPI NAND
> framework does not reconfigured the memory.
> 
> This patch adds SPI-NAND MTD PM handlers for resume ops.
> SPI NAND resume op re-initializes SPI NAND flash to its probed state.
> 
> Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> Changes in v3:
>   - Add spinand_read_cfg() call to repopulate cache
> 
> Changes in v2:
>   - Add helper spinand_block_unlock().
>   - Add spinand_ecc_enable() call.
>   - Remove some dev_err().
>   - Fix commit's title and message.
> 
>  drivers/mtd/nand/spi/core.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 1f699ad84f1b..e3fcbcf381c3 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -1099,6 +1099,38 @@ static int spinand_block_unlock(struct spinand_device *spinand)
>  	return ret;
>  }
>  
> +static void spinand_mtd_resume(struct mtd_info *mtd)
> +{
> +	struct spinand_device *spinand = mtd_to_spinand(mtd);
> +	int ret;
> +
> +	ret = spinand_reset_op(spinand);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_read_cfg(spinand);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_init_quad_enable(spinand);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_manufacturer_init(spinand);
> +	if (ret)
> +		return;
> +
> +	ret = spinand_block_unlock(spinand);
> +	if (ret)
> +		return;
> +
> +	spinand_ecc_enable(spinand, false);
> +}
> +

I don't think you quite get what me and Miquel are suggesting.

The helper should call all these functions like read_cfg() 
quad_enable(), etc. So it should look something like:

int spinand_init_flash()
{
	ret = spinand_read_cfg(spinand);
	if (ret)
		return;

	ret = spinand_init_quad_enable(spinand);
	if (ret)
		return;

	ret = spinand_upd_cfg(spinand, CFG_OTP_ENABLE, 0);
	if (ret)
		return;

	ret = spinand_manufacturer_init(spinand);
	if (ret)
		return;

	ret = spinand_block_unlock(spinand);
	if (ret)
		return;

	spinand_ecc_enable(spinand, false);
}

Then spinand_mtd_resume should look something like:

int spinand_mtd_resume()
{
	ret = spinand_reset_op(spinand);
	if (ret)
		return;

	return spinand_init_flash();
}

And spinand_init() should look something like:

int spinand_init()
{
	...
	spinand->oobbuf = ...

	spinand_init_flash();

	spinand_create_dirmaps();

	...
}


>  static int spinand_init(struct spinand_device *spinand)
>  {
>  	struct device *dev = &spinand->spimem->spi->dev;
> @@ -1186,6 +1218,7 @@ static int spinand_init(struct spinand_device *spinand)
>  	mtd->_block_isreserved = spinand_mtd_block_isreserved;
>  	mtd->_erase = spinand_mtd_erase;
>  	mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
> +	mtd->_resume = spinand_mtd_resume;
>  
>  	if (nand->ecc.engine) {
>  		ret = mtd_ooblayout_count_freebytes(mtd);
> -- 
> 2.17.1

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.

  parent reply	other threads:[~2021-05-28 12:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-27 16:12 [PATCH v3 0/3] " patrice.chotard
2021-05-27 16:12 ` [PATCH v3 1/3] mtd: spinand: Add spinand_block_unlock() helper patrice.chotard
2021-05-27 16:12 ` [PATCH v3 2/3] mtd: spinand: add spinand_read_cfg() helper patrice.chotard
2021-05-27 16:12 ` [PATCH v3 3/3] mtd: spinand: add SPI-NAND MTD resume handler patrice.chotard
2021-05-27 16:23   ` Miquel Raynal
2021-05-28  8:22     ` Patrice CHOTARD
2021-05-28 12:05   ` Pratyush Yadav [this message]
2021-05-28 12:51     ` Patrice CHOTARD
2021-05-28 13:17       ` Pratyush Yadav
2021-05-28 14:31         ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210528120508.f6viglv3gkzgweqq@ti.com \
    --to=p.yadav@ti.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=boris.brezillon@collabora.com \
    --cc=broonie@kernel.org \
    --cc=christophe.kerello@foss.st.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=patrice.chotard@foss.st.com \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH v3 3/3] mtd: spinand: add SPI-NAND MTD resume handler' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).