linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Andreas Färber" <afaerber@suse.de>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Edgar Bernardi Righi" <edgar.righi@lsitec.org.br>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
Date: Fri, 11 Jun 2021 09:41:54 +0530	[thread overview]
Message-ID: <20210611041154.GA5317@thinkpad> (raw)
In-Reply-To: <21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com>

On Thu, Jun 10, 2021 at 11:05:24PM +0300, Cristian Ciocaltea wrote:
> There are a few issues with the setup of the Actions Semi Owl S500 SoC's
> clock chain involving AHPPREDIV, H and AHB clocks:
> 
> * AHBPREDIV clock is defined as a muxer only, although it also acts as
>   a divider.
> * H clock is using a wrong divider register offset
> * AHB is defined as a multi-rate factor clock, but it is actually just
>   a fixed pass clock.
> 
> Let's provide the following fixes:
> 
> * Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
> * Use the correct register shift value in the OWL_DIVIDER definition
>   for H clock
> * Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
>   ungated OWL_COMP_FIXED_FACTOR definition.
> 
> Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC")
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> Changes in v3:
>  - Fixed the swapped flags between "ahbprediv_clk" and "ahb_clk" as noticed
>    by Mani
> 
> Changes in v2:
>  - Reverted the addition of the clock div table for H clock to support the
>    '1' divider (according to the datasheet), even though the vendor
>    implementation marks it as reserved
>  
>  drivers/clk/actions/owl-s500.c | 19 +++++++++++--------
>  1 file changed, 11 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
> index 42d6899755e6..cbeb51c804eb 100644
> --- a/drivers/clk/actions/owl-s500.c
> +++ b/drivers/clk/actions/owl-s500.c
> @@ -153,11 +153,6 @@ static struct clk_factor_table hde_factor_table[] = {
>  	{ 0, 0, 0 },
>  };
>  
> -static struct clk_factor_table ahb_factor_table[] = {
> -	{ 1, 1, 2 }, { 2, 1, 3 },
> -	{ 0, 0, 0 },
> -};
> -
>  static struct clk_div_table rmii_ref_div_table[] = {
>  	{ 0, 4 }, { 1, 10 },
>  	{ 0, 0 },
> @@ -186,7 +181,6 @@ static struct clk_div_table nand_div_table[] = {
>  
>  /* mux clock */
>  static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RATE_PARENT);
> -static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
>  
>  /* gate clocks */
>  static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
> @@ -199,16 +193,25 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
>  static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
>  
>  /* divider clocks */
> -static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
> +static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0);
>  static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
>  static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
>  
>  /* factor clocks */
> -static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0);
>  static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0);
>  static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
>  
>  /* composite clocks */
> +static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
> +			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
> +			{ 0 },
> +			OWL_DIVIDER_HW(CMU_BUSCLK1, 12, 2, 0, NULL),
> +			CLK_SET_RATE_PARENT);
> +
> +static OWL_COMP_FIXED_FACTOR(ahb_clk, "ahb_clk", "h_clk",
> +			{ 0 },
> +			1, 1, 0);
> +
>  static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p,
>  			OWL_MUX_HW(CMU_VCECLK, 4, 2),
>  			OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0),
> -- 
> 2.32.0
> 

  reply	other threads:[~2021-06-11  4:13 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 20:05 [PATCH v3 0/6] Improve clock support for Actions S500 SoC Cristian Ciocaltea
2021-06-10 20:05 ` [PATCH v3 1/6] clk: actions: Fix UART clock dividers on Owl " Cristian Ciocaltea
2021-06-28  1:46   ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 2/6] clk: actions: Fix SD clocks factor table " Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks " Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain " Cristian Ciocaltea
2021-06-11  4:11   ` Manivannan Sadhasivam [this message]
2021-06-28  1:47   ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions " Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-10 20:05 ` [PATCH v3 6/6] clk: actions: Add NIC and ETHERNET clock support " Cristian Ciocaltea
2021-06-28  1:47   ` Stephen Boyd
2021-06-16 16:06 ` [PATCH v3 0/6] Improve " Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210611041154.GA5317@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=afaerber@suse.de \
    --cc=cristian.ciocaltea@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edgar.righi@lsitec.org.br \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).