From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, linux-imx@nxp.com, kernel@pengutronix.de
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v7 5/6] ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a
Date: Thu, 8 Jul 2021 21:58:03 +1000 [thread overview]
Message-ID: <20210708115804.212-5-alistair@alistair23.me> (raw)
In-Reply-To: <20210708115804.212-1-alistair@alistair23.me>
Enable the silergy,sy7636a and silergy,sy7636a-regulator on the
reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 42 +++++++++++++++++++++++++
1 file changed, 42 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index cc33b53ae6ba..9bdae1c1236e 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -86,6 +86,34 @@ wacom_digitizer: digitizer@9 {
};
};
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4>;
+ status = "okay";
+
+ epd_pmic: sy7636a@62 {
+ compatible = "silergy,sy7636a";
+ reg = <0x62>;
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_epdpmic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <0>;
+
+ epd-pwr-good-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+ regulators {
+ compatible = "silergy,sy7636a-regulator";
+ reg_epdpmic: vcom {
+ regulator-name = "vcom";
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -179,6 +207,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_epdpmic: epdpmicgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x00000074
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x00000014
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
@@ -186,6 +221,13 @@ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
>;
};
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f
+ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
next prev parent reply other threads:[~2021-07-08 11:58 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-08 11:57 [PATCH v7 1/6] mfd: sy7636a: Initial commit Alistair Francis
2021-07-08 11:58 ` [PATCH v7 2/6] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-07-20 15:02 ` Lee Jones
2021-07-28 8:23 ` Alistair Francis
2021-08-02 7:55 ` Lee Jones
2021-08-14 11:08 ` Daniel Lezcano
2021-07-08 11:58 ` [PATCH v7 3/6] hwmon: sy7636a: Add temperature " Alistair Francis
2021-07-20 14:59 ` Lee Jones
2021-08-02 9:48 ` Alistair Francis
2021-07-08 11:58 ` [PATCH v7 4/6] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-07-08 11:58 ` Alistair Francis [this message]
2021-07-08 11:58 ` [PATCH v7 6/6] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-07-20 14:53 ` [PATCH v7 1/6] mfd: sy7636a: Initial commit Lee Jones
2021-07-20 15:23 ` Mark Brown
2021-07-20 16:09 ` Lee Jones
2021-07-20 20:26 ` Mark Brown
2021-07-30 6:21 ` Alistair Francis
2021-07-30 11:13 ` Mark Brown
2021-08-02 9:26 ` Alistair Francis
2021-08-02 10:23 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210708115804.212-5-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).