From: <alexandru.tachici@analog.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Cc: <robh+dt@kernel.org>, <andrew@lunn.ch>, <hkallweit1@gmail.com>,
<linux@armlinux.org.uk>, <davem@davemloft.net>, <kuba@kernel.org>,
Alexandru Tachici <alexandru.tachici@analog.com>
Subject: [PATCH v2 5/7] net: phy: adin1100: Add ethtool master-slave support
Date: Mon, 12 Jul 2021 16:06:29 +0300 [thread overview]
Message-ID: <20210712130631.38153-6-alexandru.tachici@analog.com> (raw)
In-Reply-To: <20210712130631.38153-1-alexandru.tachici@analog.com>
From: Alexandru Tachici <alexandru.tachici@analog.com>
Allow user to select the advertised master-slave
configuration through ethtool.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
drivers/net/phy/adin1100.c | 78 +++++++++++++++++++++++++++++++++++++-
1 file changed, 77 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index 94deaf52bbcd..ae216a80608b 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -37,7 +37,11 @@ static const int phy_10_features_array[] = {
#define ADIN_AN_STATUS 0x0201
#define ADIN_AN_ADV_ABILITY_L 0x0202
+#define ADIN_AN_ADV_FORCE_MS BIT(12)
+
#define ADIN_AN_ADV_ABILITY_M 0x0203
+#define ADIN_AN_ADV_MST BIT(4)
+
#define ADIN_AN_ADV_ABILITY_H 0x0204U
#define ADIN_AN_ADV_B10L_TX_LVL_HI_ABL BIT(13)
#define ADIN_AN_ADV_B10L_TX_LVL_HI_REQ BIT(12)
@@ -69,6 +73,10 @@ static const int phy_10_features_array[] = {
#define ADIN_CRSM_SFT_PD_RDY BIT(1)
#define ADIN_CRSM_SYS_RDY BIT(0)
+#define AN_PHY_INST_STATUS 0x8030
+#define ADIN_IS_CFG_SLV BIT(2)
+#define ADIN_IS_CFG_MST BIT(3)
+
#define ADIN_MAC_IF_LOOPBACK 0x803d
#define ADIN_MAC_IF_LOOPBACK_EN BIT(0)
#define ADIN_MAC_IF_REMOTE_LOOPBACK_EN BIT(2)
@@ -164,6 +172,7 @@ static int adin_read_lpa(struct phy_device *phydev)
static int adin_read_status(struct phy_device *phydev)
{
int ret;
+ int cfg;
ret = genphy_c45_read_link(phydev);
if (ret)
@@ -173,6 +182,8 @@ static int adin_read_status(struct phy_device *phydev)
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNKNOWN;
if (phydev->autoneg == AUTONEG_ENABLE) {
ret = adin_read_lpa(phydev);
@@ -187,7 +198,37 @@ static int adin_read_status(struct phy_device *phydev)
phydev->duplex = DUPLEX_FULL;
}
- return ret;
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L);
+ if (ret < 0)
+ return ret;
+
+ cfg = phy_read_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M);
+ if (cfg < 0)
+ return cfg;
+
+ if (ret & ADIN_AN_ADV_FORCE_MS) {
+ if (cfg & ADIN_AN_ADV_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_FORCE;
+ } else {
+ if (cfg & ADIN_AN_ADV_MST)
+ phydev->master_slave_get = MASTER_SLAVE_CFG_MASTER_PREFERRED;
+ else
+ phydev->master_slave_get = MASTER_SLAVE_CFG_SLAVE_PREFERRED;
+ }
+
+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, AN_PHY_INST_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & ADIN_IS_CFG_SLV)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_SLAVE;
+
+ if (ret & ADIN_IS_CFG_MST)
+ phydev->master_slave_state = MASTER_SLAVE_STATE_MASTER;
+
+ return 0;
}
static int adin_config_aneg(struct phy_device *phydev)
@@ -201,6 +242,41 @@ static int adin_config_aneg(struct phy_device *phydev)
if (phydev->autoneg == AUTONEG_DISABLE)
return 0;
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L,
+ ADIN_AN_ADV_FORCE_MS);
+ if (ret < 0)
+ return ret;
+ break;
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_L,
+ ADIN_AN_ADV_FORCE_MS);
+ break;
+ default:
+ break;
+ }
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ case MASTER_SLAVE_CFG_MASTER_PREFERRED:
+ ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M, ADIN_AN_ADV_MST);
+ if (ret < 0)
+ return ret;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ case MASTER_SLAVE_CFG_SLAVE_PREFERRED:
+ ret = phy_clear_bits_mmd(phydev, MDIO_MMD_AN, ADIN_AN_ADV_ABILITY_M,
+ ADIN_AN_ADV_MST);
+ if (ret < 0)
+ return ret;
+ break;
+ default:
+ break;
+ }
+
if (priv->tx_level_24v)
ret = phy_set_bits_mmd(phydev, MDIO_MMD_AN,
ADIN_AN_ADV_ABILITY_H,
--
2.25.1
next prev parent reply other threads:[~2021-07-12 12:58 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-12 13:06 [PATCH v2 0/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY alexandru.tachici
2021-07-12 13:06 ` [PATCH v2 1/7] ethtool: Add 10base-T1L link mode entries alexandru.tachici
2021-07-13 16:50 ` Andrew Lunn
2021-07-27 5:56 ` Oleksij Rempel
2021-07-12 13:06 ` [PATCH v2 2/7] ethtool: Add 10base-T1L voltage levels " alexandru.tachici
2021-07-12 13:06 ` [PATCH v2 3/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY alexandru.tachici
2021-07-13 16:58 ` Andrew Lunn
2021-07-16 21:24 ` ADIN1100 alexandru.tachici
2021-07-23 17:20 ` ADIN1100 Oleksij Rempel
2021-07-27 6:31 ` [PATCH v2 3/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY Oleksij Rempel
2021-07-27 6:47 ` Oleksij Rempel
2021-07-27 16:36 ` Andrew Lunn
2021-07-12 13:06 ` [PATCH v2 4/7] net: phy: adin1100: Add ethtool get_stats support alexandru.tachici
2021-07-12 18:41 ` Jakub Kicinski
2021-07-12 13:06 ` alexandru.tachici [this message]
2021-07-13 17:53 ` [PATCH v2 5/7] net: phy: adin1100: Add ethtool master-slave support Andrew Lunn
2021-07-12 13:06 ` [PATCH v2 6/7] net: phy: adin1100: Add SQI support alexandru.tachici
2021-07-13 17:55 ` Andrew Lunn
2021-07-12 13:06 ` [PATCH v2 7/7] dt-bindings: adin1100: Add binding for ADIN1100 Ethernet PHY alexandru.tachici
2021-07-12 14:12 ` Rob Herring
2021-07-12 17:46 ` Rob Herring
2021-07-27 5:53 ` Oleksij Rempel
2021-07-28 17:23 ` Rob Herring
2021-07-29 5:02 ` Oleksij Rempel
2021-07-12 13:33 ` [PATCH v2 0/7] net: phy: adin1100: Add initial support for ADIN1100 industrial PHY Russell King (Oracle)
2021-07-23 17:32 ` Oleksij Rempel
2021-08-03 9:47 ` alexandru.tachici
2021-08-03 11:59 ` Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210712130631.38153-6-alexandru.tachici@analog.com \
--to=alexandru.tachici@analog.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).