From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Subject: [PATCH 4.4 37/47] usb: max-3421: Prevent corruption of freed memory
Date: Mon, 26 Jul 2021 17:38:55 +0200 [thread overview]
Message-ID: <20210726153824.150508561@linuxfoundation.org> (raw)
In-Reply-To: <20210726153822.980271128@linuxfoundation.org>
From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
commit b5fdf5c6e6bee35837e160c00ac89327bdad031b upstream.
The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.
To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/max3421-hcd.c | 44 +++++++++++++----------------------------
1 file changed, 14 insertions(+), 30 deletions(-)
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -149,8 +149,6 @@ struct max3421_hcd {
*/
struct urb *curr_urb;
enum scheduling_pass sched_pass;
- struct usb_device *loaded_dev; /* dev that's loaded into the chip */
- int loaded_epnum; /* epnum whose toggles are loaded */
int urb_done; /* > 0 -> no errors, < 0: errno */
size_t curr_len;
u8 hien;
@@ -488,39 +486,17 @@ max3421_set_speed(struct usb_hcd *hcd, s
* Caller must NOT hold HCD spinlock.
*/
static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
- int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
{
- struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
- int old_epnum, same_ep, rcvtog, sndtog;
- struct usb_device *old_dev;
+ int rcvtog, sndtog;
u8 hctl;
- old_dev = max3421_hcd->loaded_dev;
- old_epnum = max3421_hcd->loaded_epnum;
-
- same_ep = (dev == old_dev && epnum == old_epnum);
- if (same_ep && !force_toggles)
- return;
-
- if (old_dev && !same_ep) {
- /* save the old end-points toggles: */
- u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
- rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
- sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
- /* no locking: HCD (i.e., we) own toggles, don't we? */
- usb_settoggle(old_dev, old_epnum, 0, rcvtog);
- usb_settoggle(old_dev, old_epnum, 1, sndtog);
- }
/* setup new endpoint's toggle bits: */
rcvtog = usb_gettoggle(dev, epnum, 0);
sndtog = usb_gettoggle(dev, epnum, 1);
hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
- max3421_hcd->loaded_epnum = epnum;
spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
/*
@@ -528,7 +504,6 @@ max3421_set_address(struct usb_hcd *hcd,
* address-assignment so it's best to just always load the
* address whenever the end-point changed/was forced.
*/
- max3421_hcd->loaded_dev = dev;
spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
}
@@ -663,7 +638,7 @@ max3421_select_and_start_urb(struct usb_
struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
struct urb *urb, *curr_urb = NULL;
struct max3421_ep *max3421_ep;
- int epnum, force_toggles = 0;
+ int epnum;
struct usb_host_endpoint *ep;
struct list_head *pos;
unsigned long flags;
@@ -773,7 +748,6 @@ done:
usb_settoggle(urb->dev, epnum, 0, 1);
usb_settoggle(urb->dev, epnum, 1, 1);
max3421_ep->pkt_state = PKT_STATE_SETUP;
- force_toggles = 1;
} else
max3421_ep->pkt_state = PKT_STATE_TRANSFER;
}
@@ -781,7 +755,7 @@ done:
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
max3421_ep->last_active = max3421_hcd->frame_number;
- max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+ max3421_set_address(hcd, urb->dev, epnum);
max3421_set_speed(hcd, urb->dev);
max3421_next_transfer(hcd, 0);
return 1;
@@ -1382,6 +1356,16 @@ max3421_urb_done(struct usb_hcd *hcd)
status = 0;
urb = max3421_hcd->curr_urb;
if (urb) {
+ /* save the old end-points toggles: */
+ u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+ int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+ int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+ int epnum = usb_endpoint_num(&urb->ep->desc);
+
+ /* no locking: HCD (i.e., we) own toggles, don't we? */
+ usb_settoggle(urb->dev, epnum, 0, rcvtog);
+ usb_settoggle(urb->dev, epnum, 1, sndtog);
+
max3421_hcd->curr_urb = NULL;
spin_lock_irqsave(&max3421_hcd->lock, flags);
usb_hcd_unlink_urb_from_ep(hcd, urb);
next prev parent reply other threads:[~2021-07-26 15:41 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 15:38 [PATCH 4.4 00/47] 4.4.277-rc1 review Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 01/47] ARM: brcmstb: dts: fix NAND nodes names Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 02/47] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 03/47] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 04/47] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 05/47] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 06/47] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 07/47] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 08/47] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 09/47] Revert "memory: fsl_ifc: fix leak of IO mapping on probe failure" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 10/47] x86/fpu: Make init_fpstate correct with optimized XSAVE Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 11/47] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 12/47] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 13/47] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 14/47] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 15/47] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 16/47] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 17/47] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 18/47] iavf: Fix an error handling path in iavf_probe() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 19/47] igb: Check if num of q_vectors is smaller than max before array access Greg Kroah-Hartman
2021-07-26 21:57 ` Pavel Machek
2021-07-26 15:38 ` [PATCH 4.4 20/47] perf test session_topology: Delete session->evlist Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 21/47] perf test bpf: Free obj_buf Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 22/47] perf probe-file: Delete namelist in del_events() on the error path Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 23/47] s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1] Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 24/47] net: fix uninit-value in caif_seqpkt_sendmsg Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 25/47] net: decnet: Fix sleeping inside in af_decnet Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 26/47] netrom: Decrease sock refcount when sock timers expire Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 27/47] scsi: iscsi: Fix iface sysfs attr detection Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 28/47] scsi: target: Fix protect handling in WRITE SAME(32) Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 29/47] Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 30/47] proc: Avoid mixing integer types in mem_rw() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 31/47] s390/ftrace: fix ftrace_update_ftrace_func implementation Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 32/47] ALSA: sb: Fix potential ABBA deadlock in CSP driver Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 33/47] xhci: Fix lost USB 2 remote wake Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 34/47] KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 35/47] usb: hub: Disable USB 3 device initiated lpm if exit latency is too high Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 36/47] USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS Greg Kroah-Hartman
2021-07-26 15:38 ` Greg Kroah-Hartman [this message]
2021-07-26 15:38 ` [PATCH 4.4 38/47] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 39/47] USB: serial: option: add support for u-blox LARA-R6 family Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 40/47] USB: serial: cp210x: fix comments for GE CS1000 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 41/47] USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 42/47] tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 43/47] media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 44/47] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 45/47] iio: accel: bma180: Use explicit member assignment Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 46/47] iio: accel: bma180: Fix BMA25x bandwidth register values Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 47/47] btrfs: compression: dont try to compress if we dont have enough pages Greg Kroah-Hartman
2021-07-27 0:37 ` [PATCH 4.4 00/47] 4.4.277-rc1 review Shuah Khan
2021-07-27 3:49 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726153824.150508561@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.tomlinson@alliedtelesis.co.nz \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).