From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Marco De Marco <marco.demarco@posteo.net>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.4 39/47] USB: serial: option: add support for u-blox LARA-R6 family
Date: Mon, 26 Jul 2021 17:38:57 +0200 [thread overview]
Message-ID: <20210726153824.211241175@linuxfoundation.org> (raw)
In-Reply-To: <20210726153822.980271128@linuxfoundation.org>
From: Marco De Marco <marco.demarco@posteo.net>
commit 94b619a07655805a1622484967754f5848640456 upstream.
The patch is meant to support LARA-R6 Cat 1 module family.
Module USB ID:
Vendor ID: 0x05c6
Product ID: 0x90fA
Interface layout:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: QMI wwan (not available in all versions)
Signed-off-by: Marco De Marco <marco.demarco@posteo.net>
Link: https://lore.kernel.org/r/49260184.kfMIbaSn9k@mars
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -241,6 +241,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_UC15 0x9090
/* These u-blox products use Qualcomm's vendor ID */
#define UBLOX_PRODUCT_R410M 0x90b2
+#define UBLOX_PRODUCT_R6XX 0x90fa
/* These Yuga products use Qualcomm's vendor ID */
#define YUGA_PRODUCT_CLM920_NC5 0x9625
@@ -1098,6 +1099,8 @@ static const struct usb_device_id option
/* u-blox products using Qualcomm vendor ID */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
.driver_info = RSVD(1) | RSVD(3) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R6XX),
+ .driver_info = RSVD(3) },
/* Quectel products using Quectel vendor ID */
{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
.driver_info = RSVD(4) },
next prev parent reply other threads:[~2021-07-26 15:42 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 15:38 [PATCH 4.4 00/47] 4.4.277-rc1 review Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 01/47] ARM: brcmstb: dts: fix NAND nodes names Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 02/47] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 03/47] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 04/47] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 05/47] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 06/47] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 07/47] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 08/47] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 09/47] Revert "memory: fsl_ifc: fix leak of IO mapping on probe failure" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 10/47] x86/fpu: Make init_fpstate correct with optimized XSAVE Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 11/47] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 12/47] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 13/47] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 14/47] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 15/47] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 16/47] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 17/47] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 18/47] iavf: Fix an error handling path in iavf_probe() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 19/47] igb: Check if num of q_vectors is smaller than max before array access Greg Kroah-Hartman
2021-07-26 21:57 ` Pavel Machek
2021-07-26 15:38 ` [PATCH 4.4 20/47] perf test session_topology: Delete session->evlist Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 21/47] perf test bpf: Free obj_buf Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 22/47] perf probe-file: Delete namelist in del_events() on the error path Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 23/47] s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1] Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 24/47] net: fix uninit-value in caif_seqpkt_sendmsg Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 25/47] net: decnet: Fix sleeping inside in af_decnet Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 26/47] netrom: Decrease sock refcount when sock timers expire Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 27/47] scsi: iscsi: Fix iface sysfs attr detection Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 28/47] scsi: target: Fix protect handling in WRITE SAME(32) Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 29/47] Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 30/47] proc: Avoid mixing integer types in mem_rw() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 31/47] s390/ftrace: fix ftrace_update_ftrace_func implementation Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 32/47] ALSA: sb: Fix potential ABBA deadlock in CSP driver Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 33/47] xhci: Fix lost USB 2 remote wake Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 34/47] KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 35/47] usb: hub: Disable USB 3 device initiated lpm if exit latency is too high Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 36/47] USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 37/47] usb: max-3421: Prevent corruption of freed memory Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 38/47] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() Greg Kroah-Hartman
2021-07-26 15:38 ` Greg Kroah-Hartman [this message]
2021-07-26 15:38 ` [PATCH 4.4 40/47] USB: serial: cp210x: fix comments for GE CS1000 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 41/47] USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 42/47] tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 43/47] media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 44/47] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 45/47] iio: accel: bma180: Use explicit member assignment Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 46/47] iio: accel: bma180: Fix BMA25x bandwidth register values Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 47/47] btrfs: compression: dont try to compress if we dont have enough pages Greg Kroah-Hartman
2021-07-27 0:37 ` [PATCH 4.4 00/47] 4.4.277-rc1 review Shuah Khan
2021-07-27 3:49 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726153824.211241175@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marco.demarco@posteo.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).