From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Peter Meerwald <pmeerw@pmeerw.net>,
Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>,
Linus Walleij <linus.walleij@linaro.org>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH 4.4 45/47] iio: accel: bma180: Use explicit member assignment
Date: Mon, 26 Jul 2021 17:39:03 +0200 [thread overview]
Message-ID: <20210726153824.391718698@linuxfoundation.org> (raw)
In-Reply-To: <20210726153822.980271128@linuxfoundation.org>
From: Linus Walleij <linus.walleij@linaro.org>
commit 9436abc40139503a7cea22a96437697d048f31c0 upstream
This uses the C99 explicit .member assignment for the
variant data in struct bma180_part_info. This makes it
easier to understand and add new variants.
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/accel/bma180.c | 68 +++++++++++++++++++++++++++++----------------
1 file changed, 44 insertions(+), 24 deletions(-)
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -624,32 +624,52 @@ static const struct iio_chan_spec bma250
static const struct bma180_part_info bma180_part_info[] = {
[BMA180] = {
- bma180_channels, ARRAY_SIZE(bma180_channels),
- bma180_scale_table, ARRAY_SIZE(bma180_scale_table),
- bma180_bw_table, ARRAY_SIZE(bma180_bw_table),
- BMA180_CTRL_REG0, BMA180_RESET_INT,
- BMA180_CTRL_REG0, BMA180_SLEEP,
- BMA180_BW_TCS, BMA180_BW,
- BMA180_OFFSET_LSB1, BMA180_RANGE,
- BMA180_TCO_Z, BMA180_MODE_CONFIG, BMA180_LOW_POWER,
- BMA180_CTRL_REG3, BMA180_NEW_DATA_INT,
- BMA180_RESET,
- bma180_chip_config,
- bma180_chip_disable,
+ .channels = bma180_channels,
+ .num_channels = ARRAY_SIZE(bma180_channels),
+ .scale_table = bma180_scale_table,
+ .num_scales = ARRAY_SIZE(bma180_scale_table),
+ .bw_table = bma180_bw_table,
+ .num_bw = ARRAY_SIZE(bma180_bw_table),
+ .int_reset_reg = BMA180_CTRL_REG0,
+ .int_reset_mask = BMA180_RESET_INT,
+ .sleep_reg = BMA180_CTRL_REG0,
+ .sleep_mask = BMA180_SLEEP,
+ .bw_reg = BMA180_BW_TCS,
+ .bw_mask = BMA180_BW,
+ .scale_reg = BMA180_OFFSET_LSB1,
+ .scale_mask = BMA180_RANGE,
+ .power_reg = BMA180_TCO_Z,
+ .power_mask = BMA180_MODE_CONFIG,
+ .lowpower_val = BMA180_LOW_POWER,
+ .int_enable_reg = BMA180_CTRL_REG3,
+ .int_enable_mask = BMA180_NEW_DATA_INT,
+ .softreset_reg = BMA180_RESET,
+ .chip_config = bma180_chip_config,
+ .chip_disable = bma180_chip_disable,
},
[BMA250] = {
- bma250_channels, ARRAY_SIZE(bma250_channels),
- bma250_scale_table, ARRAY_SIZE(bma250_scale_table),
- bma250_bw_table, ARRAY_SIZE(bma250_bw_table),
- BMA250_INT_RESET_REG, BMA250_INT_RESET_MASK,
- BMA250_POWER_REG, BMA250_SUSPEND_MASK,
- BMA250_BW_REG, BMA250_BW_MASK,
- BMA250_RANGE_REG, BMA250_RANGE_MASK,
- BMA250_POWER_REG, BMA250_LOWPOWER_MASK, 1,
- BMA250_INT_ENABLE_REG, BMA250_DATA_INTEN_MASK,
- BMA250_RESET_REG,
- bma250_chip_config,
- bma250_chip_disable,
+ .channels = bma250_channels,
+ .num_channels = ARRAY_SIZE(bma250_channels),
+ .scale_table = bma250_scale_table,
+ .num_scales = ARRAY_SIZE(bma250_scale_table),
+ .bw_table = bma250_bw_table,
+ .num_bw = ARRAY_SIZE(bma250_bw_table),
+ .int_reset_reg = BMA250_INT_RESET_REG,
+ .int_reset_mask = BMA250_INT_RESET_MASK,
+ .sleep_reg = BMA250_POWER_REG,
+ .sleep_mask = BMA250_SUSPEND_MASK,
+ .bw_reg = BMA250_BW_REG,
+ .bw_mask = BMA250_BW_MASK,
+ .scale_reg = BMA250_RANGE_REG,
+ .scale_mask = BMA250_RANGE_MASK,
+ .power_reg = BMA250_POWER_REG,
+ .power_mask = BMA250_LOWPOWER_MASK,
+ .lowpower_val = 1,
+ .int_enable_reg = BMA250_INT_ENABLE_REG,
+ .int_enable_mask = BMA250_DATA_INTEN_MASK,
+ .softreset_reg = BMA250_RESET_REG,
+ .chip_config = bma250_chip_config,
+ .chip_disable = bma250_chip_disable,
},
};
next prev parent reply other threads:[~2021-07-26 15:42 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 15:38 [PATCH 4.4 00/47] 4.4.277-rc1 review Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 01/47] ARM: brcmstb: dts: fix NAND nodes names Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 02/47] ARM: dts: BCM63xx: Fix " Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 03/47] ARM: dts: imx6: phyFLEX: Fix UART hardware flow control Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 04/47] ARM: imx: pm-imx5: Fix references to imx5_cpu_suspend_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 05/47] thermal/core: Correct function name thermal_zone_device_unregister() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 06/47] kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 07/47] scsi: aic7xxx: Fix unintentional sign extension issue on left shift of u8 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 08/47] sched/fair: Fix CFS bandwidth hrtimer expiry type Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 09/47] Revert "memory: fsl_ifc: fix leak of IO mapping on probe failure" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 10/47] x86/fpu: Make init_fpstate correct with optimized XSAVE Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 11/47] net: ipv6: fix return value of ip6_skb_dst_mtu Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 12/47] net: bcmgenet: Ensure all TX/RX queues DMAs are disabled Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 13/47] net: moxa: fix UAF in moxart_mac_probe Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 14/47] net: ti: fix UAF in tlan_remove_one Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 15/47] net: validate lwtstate->data before returning from skb_tunnel_info() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 16/47] tcp: annotate data races around tp->mtu_info Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 17/47] ipv6: tcp: drop silly ICMPv6 packet too big messages Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 18/47] iavf: Fix an error handling path in iavf_probe() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 19/47] igb: Check if num of q_vectors is smaller than max before array access Greg Kroah-Hartman
2021-07-26 21:57 ` Pavel Machek
2021-07-26 15:38 ` [PATCH 4.4 20/47] perf test session_topology: Delete session->evlist Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 21/47] perf test bpf: Free obj_buf Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 22/47] perf probe-file: Delete namelist in del_events() on the error path Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 23/47] s390/bpf: Perform r1 range checking before accessing jit->seen_reg[r1] Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 24/47] net: fix uninit-value in caif_seqpkt_sendmsg Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 25/47] net: decnet: Fix sleeping inside in af_decnet Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 26/47] netrom: Decrease sock refcount when sock timers expire Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 27/47] scsi: iscsi: Fix iface sysfs attr detection Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 28/47] scsi: target: Fix protect handling in WRITE SAME(32) Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 29/47] Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 30/47] proc: Avoid mixing integer types in mem_rw() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 31/47] s390/ftrace: fix ftrace_update_ftrace_func implementation Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 32/47] ALSA: sb: Fix potential ABBA deadlock in CSP driver Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 33/47] xhci: Fix lost USB 2 remote wake Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 34/47] KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 35/47] usb: hub: Disable USB 3 device initiated lpm if exit latency is too high Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 36/47] USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 37/47] usb: max-3421: Prevent corruption of freed memory Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 38/47] usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 39/47] USB: serial: option: add support for u-blox LARA-R6 family Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 40/47] USB: serial: cp210x: fix comments for GE CS1000 Greg Kroah-Hartman
2021-07-26 15:38 ` [PATCH 4.4 41/47] USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 42/47] tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 43/47] media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf() Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 44/47] net: bcmgenet: ensure EXT_ENERGY_DET_MASK is clear Greg Kroah-Hartman
2021-07-26 15:39 ` Greg Kroah-Hartman [this message]
2021-07-26 15:39 ` [PATCH 4.4 46/47] iio: accel: bma180: Fix BMA25x bandwidth register values Greg Kroah-Hartman
2021-07-26 15:39 ` [PATCH 4.4 47/47] btrfs: compression: dont try to compress if we dont have enough pages Greg Kroah-Hartman
2021-07-27 0:37 ` [PATCH 4.4 00/47] 4.4.277-rc1 review Shuah Khan
2021-07-27 3:49 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726153824.391718698@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=o.v.kravchenko@globallogic.com \
--cc=pmeerw@pmeerw.net \
--cc=stable@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).