[PATCH AUTOSEL 5.13 01/21] regulator: rtmv20: Fix wrong mask for strobe-polarity-high

[PATCH AUTOSEL 5.13 01/21] regulator: rtmv20: Fix wrong mask for strobe-polarity-high

[Sasha Levin]

From: ChiYuan Huang <cy_huang@richtek.com>

[ Upstream commit 2b6a761be079f9fa8abf3157b5679a6f38885db4 ]

Fix wrong mask for strobe-polarity-high.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
In-reply-to: <CAFRkauB=0KwrJW19nJTTagdHhBR=V2R8YFWG3R3oVXt=rBRsqw@mail.gmail.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/1624723112-26653-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/rtmv20-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/rtmv20-regulator.c b/drivers/regulator/rtmv20-regulator.c
index 4bca64de0f67..2ee334174e2b 100644
--- a/drivers/regulator/rtmv20-regulator.c
+++ b/drivers/regulator/rtmv20-regulator.c
@@ -37,7 +37,7 @@
 #define RTMV20_WIDTH2_MASK	GENMASK(7, 0)
 #define RTMV20_LBPLVL_MASK	GENMASK(3, 0)
 #define RTMV20_LBPEN_MASK	BIT(7)
-#define RTMV20_STROBEPOL_MASK	BIT(1)
+#define RTMV20_STROBEPOL_MASK	BIT(0)
 #define RTMV20_VSYNPOL_MASK	BIT(1)
 #define RTMV20_FSINEN_MASK	BIT(7)
 #define RTMV20_ESEN_MASK	BIT(6)
-- 
2.30.2

[PATCH AUTOSEL 5.13 02/21] regulator: rt5033: Fix n_voltages settings for BUCK and LDO

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit 6549c46af8551b346bcc0b9043f93848319acd5c ]

For linear regulators, the n_voltages should be (max - min) / step + 1.

Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f.
If value is from 20 to 31, the voltage will all be fixed to 3V.
And LDO also, just vout range is different from 1.2v to 3v, step is the
same. If value is from 18 to 31, the voltage will also be fixed to 3v.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210627080418.1718127-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mfd/rt5033-private.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/mfd/rt5033-private.h b/include/linux/mfd/rt5033-private.h
index 2d1895c3efbf..40a0c2dfb80f 100644
--- a/include/linux/mfd/rt5033-private.h
+++ b/include/linux/mfd/rt5033-private.h
@@ -200,13 +200,13 @@ enum rt5033_reg {
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MIN		1000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_BUCK_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM		21
 
 /* RT5033 regulator LDO output voltage uV */
 #define RT5033_REGULATOR_LDO_VOLTAGE_MIN		1200000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_MAX		3000000U
 #define RT5033_REGULATOR_LDO_VOLTAGE_STEP		100000U
-#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		32
+#define RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM		19
 
 /* RT5033 regulator SAFE LDO output voltage uV */
 #define RT5033_REGULATOR_SAFE_LDO_VOLTAGE		4900000U
-- 
2.30.2

[PATCH AUTOSEL 5.13 03/21] spi: stm32h7: fix full duplex irq handler handling

[Sasha Levin]

From: Alain Volmat <alain.volmat@foss.st.com>

[ Upstream commit e4a5c19888a5f8a9390860ca493e643be58c8791 ]

In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are
set. But to avoid 2 different handlings, just add TXP and RXP flag in
the mask instead of DXP, and then keep the initial handling of TXP and
RXP events.
Also rephrase comment about EOTIE which is one of the interrupt enable
bits. It is not triggered by any event.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-stm32.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 8ffcffbb8157..65b37c8dc49f 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -884,15 +884,18 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 	ier = readl_relaxed(spi->base + STM32H7_SPI_IER);
 
 	mask = ier;
-	/* EOTIE is triggered on EOT, SUSP and TXC events. */
+	/*
+	 * EOTIE enables irq from EOT, SUSP and TXC events. We need to set
+	 * SUSP to acknowledge it later. TXC is automatically cleared
+	 */
+
 	mask |= STM32H7_SPI_SR_SUSP;
 	/*
-	 * When TXTF is set, DXPIE and TXPIE are cleared. So in case of
-	 * Full-Duplex, need to poll RXP event to know if there are remaining
-	 * data, before disabling SPI.
+	 * DXPIE is set in Full-Duplex, one IT will be raised if TXP and RXP
+	 * are set. So in case of Full-Duplex, need to poll TXP and RXP event.
 	 */
-	if (spi->rx_buf && !spi->cur_usedma)
-		mask |= STM32H7_SPI_SR_RXP;
+	if ((spi->cur_comm == SPI_FULL_DUPLEX) && !spi->cur_usedma)
+		mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP;
 
 	if (!(sr & mask)) {
 		dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
-- 
2.30.2

[PATCH AUTOSEL 5.13 04/21] ASoC: tlv320aic31xx: fix reversed bclk/wclk master bits

[Sasha Levin]

From: Kyle Russell <bkylerussell@gmail.com>

[ Upstream commit 9cf76a72af6ab81030dea6481b1d7bdd814fbdaf ]

These are backwards from Table 7-71 of the TLV320AIC3100 spec [1].

This was broken in 12eb4d66ba2e when BCLK_MASTER and WCLK_MASTER
were converted from 0x08 and 0x04 to BIT(2) and BIT(3), respectively.

-#define AIC31XX_BCLK_MASTER		0x08
-#define AIC31XX_WCLK_MASTER		0x04
+#define AIC31XX_BCLK_MASTER		BIT(2)
+#define AIC31XX_WCLK_MASTER		BIT(3)

Probably just a typo since the defines were not listed in bit order.

[1] https://www.ti.com/lit/gpn/tlv320aic3100

Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Link: https://lore.kernel.org/r/20210622010941.241386-1-bkylerussell@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tlv320aic31xx.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic31xx.h b/sound/soc/codecs/tlv320aic31xx.h
index 81952984613d..2513922a0292 100644
--- a/sound/soc/codecs/tlv320aic31xx.h
+++ b/sound/soc/codecs/tlv320aic31xx.h
@@ -151,8 +151,8 @@ struct aic31xx_pdata {
 #define AIC31XX_WORD_LEN_24BITS		0x02
 #define AIC31XX_WORD_LEN_32BITS		0x03
 #define AIC31XX_IFACE1_MASTER_MASK	GENMASK(3, 2)
-#define AIC31XX_BCLK_MASTER		BIT(2)
-#define AIC31XX_WCLK_MASTER		BIT(3)
+#define AIC31XX_BCLK_MASTER		BIT(3)
+#define AIC31XX_WCLK_MASTER		BIT(2)
 
 /* AIC31XX_DATA_OFFSET */
 #define AIC31XX_DATA_OFFSET_MASK	GENMASK(7, 0)
-- 
2.30.2

[PATCH AUTOSEL 5.13 05/21] regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register

[Sasha Levin]

From: Axel Lin <axel.lin@ingics.com>

[ Upstream commit ea986908ccfcc53204a03bb0841227e1b26578c4 ]

If use dev->parent, the regulator_unregister will not be called when this
driver is unloaded. Fix it by using dev instead.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210702142140.2678130-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/mtk-dvfsrc-regulator.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/regulator/mtk-dvfsrc-regulator.c b/drivers/regulator/mtk-dvfsrc-regulator.c
index d3d876198d6e..234af3a66c77 100644
--- a/drivers/regulator/mtk-dvfsrc-regulator.c
+++ b/drivers/regulator/mtk-dvfsrc-regulator.c
@@ -179,8 +179,7 @@ static int dvfsrc_vcore_regulator_probe(struct platform_device *pdev)
 	for (i = 0; i < regulator_init_data->size; i++) {
 		config.dev = dev->parent;
 		config.driver_data = (mt_regulators + i);
-		rdev = devm_regulator_register(dev->parent,
-					       &(mt_regulators + i)->desc,
+		rdev = devm_regulator_register(dev, &(mt_regulators + i)->desc,
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(dev, "failed to register %s\n",
-- 
2.30.2

[PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()

[Sasha Levin]

From: Alan Stern <stern@rowland.harvard.edu>

[ Upstream commit b0863f1927323110e3d0d69f6adb6a91018a9a3c ]

When the user submits a control URB via usbfs, the user supplies the
bRequestType value and the kernel uses it to compute the pipe value.
However, do_proc_control() performs this computation incorrectly in
the case where the bRequestType direction bit is set to USB_DIR_IN and
the URB's transfer length is 0: The pipe's direction is also set to IN
but it should be OUT, which is the direction the actual transfer will
use regardless of bRequestType.

Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup
packet direction") added a check to compare the direction bit in the
pipe value to a control URB's actual direction and to WARN if they are
different.  This can be triggered by the incorrect computation
mentioned above, as found by syzbot.

This patch fixes the computation, thus avoiding the WARNing.

Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/core/devio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 2218941d35a3..73b60f013b20 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_dev_state *ps,
 		"wIndex=%04x wLength=%04x\n",
 		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
 		ctrl->wIndex, ctrl->wLength);
-	if (ctrl->bRequestType & 0x80) {
+	if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
 		pipe = usb_rcvctrlpipe(dev, 0);
 		snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
 
-- 
2.30.2

Re: [PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()

[Greg Kroah-Hartman]

On Tue, Jul 27, 2021 at 09:18:53AM -0400, Sasha Levin wrote:
> From: Alan Stern <stern@rowland.harvard.edu>
> 
> [ Upstream commit b0863f1927323110e3d0d69f6adb6a91018a9a3c ]
> 
> When the user submits a control URB via usbfs, the user supplies the
> bRequestType value and the kernel uses it to compute the pipe value.
> However, do_proc_control() performs this computation incorrectly in
> the case where the bRequestType direction bit is set to USB_DIR_IN and
> the URB's transfer length is 0: The pipe's direction is also set to IN
> but it should be OUT, which is the direction the actual transfer will
> use regardless of bRequestType.
> 
> Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup
> packet direction") added a check to compare the direction bit in the
> pipe value to a control URB's actual direction and to WARN if they are
> different.  This can be triggered by the incorrect computation
> mentioned above, as found by syzbot.
> 
> This patch fixes the computation, thus avoiding the WARNing.
> 
> Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
> Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/usb/core/devio.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
> index 2218941d35a3..73b60f013b20 100644
> --- a/drivers/usb/core/devio.c
> +++ b/drivers/usb/core/devio.c
> @@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_dev_state *ps,
>  		"wIndex=%04x wLength=%04x\n",
>  		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
>  		ctrl->wIndex, ctrl->wLength);
> -	if (ctrl->bRequestType & 0x80) {
> +	if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
>  		pipe = usb_rcvctrlpipe(dev, 0);
>  		snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
>  
> -- 
> 2.30.2
> 

This is not needed in any kernel that does not also have 5cc59c418fde
("USB: core: WARN if pipe direction != setup packet direction"), which
showed up in 5.14-rc1, so please drop this from all of the AUTOSEL
trees.

thanks,

greg k-h

Re: [PATCH AUTOSEL 5.13 06/21] USB: core: Fix incorrect pipe calculation in do_proc_control()

[Sasha Levin]

On Tue, Jul 27, 2021 at 03:28:20PM +0200, Greg Kroah-Hartman wrote:
>On Tue, Jul 27, 2021 at 09:18:53AM -0400, Sasha Levin wrote:
>> From: Alan Stern <stern@rowland.harvard.edu>
>>
>> [ Upstream commit b0863f1927323110e3d0d69f6adb6a91018a9a3c ]
>>
>> When the user submits a control URB via usbfs, the user supplies the
>> bRequestType value and the kernel uses it to compute the pipe value.
>> However, do_proc_control() performs this computation incorrectly in
>> the case where the bRequestType direction bit is set to USB_DIR_IN and
>> the URB's transfer length is 0: The pipe's direction is also set to IN
>> but it should be OUT, which is the direction the actual transfer will
>> use regardless of bRequestType.
>>
>> Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup
>> packet direction") added a check to compare the direction bit in the
>> pipe value to a control URB's actual direction and to WARN if they are
>> different.  This can be triggered by the incorrect computation
>> mentioned above, as found by syzbot.
>>
>> This patch fixes the computation, thus avoiding the WARNing.
>>
>> Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com
>> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
>> Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/usb/core/devio.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
>> index 2218941d35a3..73b60f013b20 100644
>> --- a/drivers/usb/core/devio.c
>> +++ b/drivers/usb/core/devio.c
>> @@ -1133,7 +1133,7 @@ static int do_proc_control(struct usb_dev_state *ps,
>>  		"wIndex=%04x wLength=%04x\n",
>>  		ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
>>  		ctrl->wIndex, ctrl->wLength);
>> -	if (ctrl->bRequestType & 0x80) {
>> +	if ((ctrl->bRequestType & USB_DIR_IN) && ctrl->wLength) {
>>  		pipe = usb_rcvctrlpipe(dev, 0);
>>  		snoop_urb(dev, NULL, pipe, ctrl->wLength, tmo, SUBMIT, NULL, 0);
>>
>> --
>> 2.30.2
>>
>
>This is not needed in any kernel that does not also have 5cc59c418fde
>("USB: core: WARN if pipe direction != setup packet direction"), which
>showed up in 5.14-rc1, so please drop this from all of the AUTOSEL
>trees.

Will do, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.13 07/21] r8152: Fix potential PM refcount imbalance

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9c23aa51477a37f8b56c3c40192248db0663c196 ]

rtl8152_close() takes the refcount via usb_autopm_get_interface() but
it doesn't release when RTL8152_UNPLUG test hits.  This may lead to
the imbalance of PM refcount.  This patch addresses it.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index e25bfb7021ed..8dcc55e4a5bc 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -6761,9 +6761,10 @@ static int rtl8152_close(struct net_device *netdev)
 		tp->rtl_ops.down(tp);
 
 		mutex_unlock(&tp->control);
+	}
 
+	if (!res)
 		usb_autopm_put_interface(tp->intf);
-	}
 
 	free_all_mem(tp);
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 08/21] r8152: Fix a deadlock by doubly PM resume

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 776ac63a986d211286230c4fd70f85390eabedcd ]

r8152 driver sets up the MAC address at reset-resume, while
rtl8152_set_mac_address() has the temporary autopm get/put.  This may
lead to a deadlock as the PM lock has been already taken for the
execution of the runtime PM callback.

This patch adds the workaround to avoid the superfluous autpm when
called from rtl8152_reset_resume().

Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8dcc55e4a5bc..2cf763b4ea84 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1550,7 +1550,8 @@ static int
 rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
 		  u32 advertising);
 
-static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+static int __rtl8152_set_mac_address(struct net_device *netdev, void *p,
+				     bool in_resume)
 {
 	struct r8152 *tp = netdev_priv(netdev);
 	struct sockaddr *addr = p;
@@ -1559,9 +1560,11 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 	if (!is_valid_ether_addr(addr->sa_data))
 		goto out1;
 
-	ret = usb_autopm_get_interface(tp->intf);
-	if (ret < 0)
-		goto out1;
+	if (!in_resume) {
+		ret = usb_autopm_get_interface(tp->intf);
+		if (ret < 0)
+			goto out1;
+	}
 
 	mutex_lock(&tp->control);
 
@@ -1573,11 +1576,17 @@ static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
 
 	mutex_unlock(&tp->control);
 
-	usb_autopm_put_interface(tp->intf);
+	if (!in_resume)
+		usb_autopm_put_interface(tp->intf);
 out1:
 	return ret;
 }
 
+static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+{
+	return __rtl8152_set_mac_address(netdev, p, false);
+}
+
 /* Devices containing proper chips can support a persistent
  * host system provided MAC address.
  * Examples of this are Dell TB15 and Dell WD15 docks
@@ -1696,7 +1705,7 @@ static int determine_ethernet_addr(struct r8152 *tp, struct sockaddr *sa)
 	return ret;
 }
 
-static int set_ethernet_addr(struct r8152 *tp)
+static int set_ethernet_addr(struct r8152 *tp, bool in_resume)
 {
 	struct net_device *dev = tp->netdev;
 	struct sockaddr sa;
@@ -1709,7 +1718,7 @@ static int set_ethernet_addr(struct r8152 *tp)
 	if (tp->version == RTL_VER_01)
 		ether_addr_copy(dev->dev_addr, sa.sa_data);
 	else
-		ret = rtl8152_set_mac_address(dev, &sa);
+		ret = __rtl8152_set_mac_address(dev, &sa, in_resume);
 
 	return ret;
 }
@@ -8442,7 +8451,7 @@ static int rtl8152_reset_resume(struct usb_interface *intf)
 	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
 	tp->rtl_ops.init(tp);
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
-	set_ethernet_addr(tp);
+	set_ethernet_addr(tp, true);
 	return rtl8152_resume(intf);
 }
 
@@ -9562,7 +9571,7 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->rtl_fw.retry = true;
 #endif
 	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
-	set_ethernet_addr(tp);
+	set_ethernet_addr(tp, false);
 
 	usb_set_intfdata(intf, tp);
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 09/21] qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()

[Sasha Levin]

From: Jia He <justin.he@arm.com>

[ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ]

Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ
QL41000 ethernet controller:
 BUG: scheduling while atomic: kworker/0:4/531/0x00000200
  [qed_probe:488()]hw prepare failed
  kernel BUG at mm/vmalloc.c:2355!
  Internal error: Oops - BUG: 0 [#1] SMP
  CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu
  pstate: 00400009 (nzcv daif +PAN -UAO)
 Call trace:
  vunmap+0x4c/0x50
  iounmap+0x48/0x58
  qed_free_pci+0x60/0x80 [qed]
  qed_probe+0x35c/0x688 [qed]
  __qede_probe+0x88/0x5c8 [qede]
  qede_probe+0x60/0xe0 [qede]
  local_pci_probe+0x48/0xa0
  work_for_cpu_fn+0x24/0x38
  process_one_work+0x1d0/0x468
  worker_thread+0x238/0x4e0
  kthread+0xf0/0x118
  ret_from_fork+0x10/0x18

In this case, qed_hw_prepare() returns error due to hw/fw error, but in
theory work queue should be in process context instead of interrupt.

The root cause might be the unpaired spin_{un}lock_bh() in
_qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly.

Reported-by: Lijian Zhang <Lijian.Zhang@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_mcp.c | 23 +++++++++++++++++------
 1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index cd882c453394..caeef25c89bb 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -474,14 +474,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-		if (!qed_mcp_has_pending_cmd(p_hwfn))
+		if (!qed_mcp_has_pending_cmd(p_hwfn)) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
+		}
 
 		rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
-		if (!rc)
+		if (!rc) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
-		else if (rc != -EAGAIN)
+		} else if (rc != -EAGAIN) {
 			goto err;
+		}
 
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 
@@ -498,6 +502,8 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EAGAIN;
 	}
 
+	spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
+
 	/* Send the mailbox command */
 	qed_mcp_reread_offsets(p_hwfn, p_ptt);
 	seq_num = ++p_hwfn->mcp_info->drv_mb_seq;
@@ -524,14 +530,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 
 		spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-		if (p_cmd_elem->b_is_completed)
+		if (p_cmd_elem->b_is_completed) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
+		}
 
 		rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
-		if (!rc)
+		if (!rc) {
+			spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 			break;
-		else if (rc != -EAGAIN)
+		} else if (rc != -EAGAIN) {
 			goto err;
+		}
 
 		spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 	} while (++cnt < max_retries);
@@ -554,6 +564,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
 		return -EAGAIN;
 	}
 
+	spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
 	qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem);
 	spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
 
-- 
2.30.2

RE: [PATCH AUTOSEL 5.13 09/21] qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()

[Justin He]

Hi, Sasha

> -----Original Message-----
> From: Sasha Levin <sashal@kernel.org>
> Sent: Tuesday, July 27, 2021 9:19 PM
> To: linux-kernel@vger.kernel.org; stable@vger.kernel.org
> Cc: Justin He <Justin.He@arm.com>; Lijian Zhang <Lijian.Zhang@arm.com>;
> David S . Miller <davem@davemloft.net>; Sasha Levin <sashal@kernel.org>;
> netdev@vger.kernel.org
> Subject: [PATCH AUTOSEL 5.13 09/21] qed: fix possible unpaired
> spin_{un}lock_bh in _qed_mcp_cmd_and_union()
>
> From: Jia He <justin.he@arm.com>
If possible, please stop taking this commit to any stable version because
it has been reverted by later commit.

This patch is harmless but pointless.

Sorry for the inconvenience.

--
Cheers,
Justin (Jia He)


>
> [ Upstream commit 6206b7981a36476f4695d661ae139f7db36a802d ]
>
> Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ
> QL41000 ethernet controller:
>  BUG: scheduling while atomic: kworker/0:4/531/0x00000200
>   [qed_probe:488()]hw prepare failed
>   kernel BUG at mm/vmalloc.c:2355!
>   Internal error: Oops - BUG: 0 [#1] SMP
>   CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-
> Ubuntu
>   pstate: 00400009 (nzcv daif +PAN -UAO)
>  Call trace:
>   vunmap+0x4c/0x50
>   iounmap+0x48/0x58
>   qed_free_pci+0x60/0x80 [qed]
>   qed_probe+0x35c/0x688 [qed]
>   __qede_probe+0x88/0x5c8 [qede]
>   qede_probe+0x60/0xe0 [qede]
>   local_pci_probe+0x48/0xa0
>   work_for_cpu_fn+0x24/0x38
>   process_one_work+0x1d0/0x468
>   worker_thread+0x238/0x4e0
>   kthread+0xf0/0x118
>   ret_from_fork+0x10/0x18
>
> In this case, qed_hw_prepare() returns error due to hw/fw error, but in
> theory work queue should be in process context instead of interrupt.
>
> The root cause might be the unpaired spin_{un}lock_bh() in
> _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly.
>
> Reported-by: Lijian Zhang <Lijian.Zhang@arm.com>
> Signed-off-by: Jia He <justin.he@arm.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/ethernet/qlogic/qed/qed_mcp.c | 23 +++++++++++++++++------
>  1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
> b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
> index cd882c453394..caeef25c89bb 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
> @@ -474,14 +474,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
>
>               spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
>
> -             if (!qed_mcp_has_pending_cmd(p_hwfn))
> +             if (!qed_mcp_has_pending_cmd(p_hwfn)) {
> +                     spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>                       break;
> +             }
>
>               rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
> -             if (!rc)
> +             if (!rc) {
> +                     spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>                       break;
> -             else if (rc != -EAGAIN)
> +             } else if (rc != -EAGAIN) {
>                       goto err;
> +             }
>
>               spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>
> @@ -498,6 +502,8 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
>               return -EAGAIN;
>       }
>
> +     spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
> +
>       /* Send the mailbox command */
>       qed_mcp_reread_offsets(p_hwfn, p_ptt);
>       seq_num = ++p_hwfn->mcp_info->drv_mb_seq;
> @@ -524,14 +530,18 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
>
>               spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
>
> -             if (p_cmd_elem->b_is_completed)
> +             if (p_cmd_elem->b_is_completed) {
> +                     spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>                       break;
> +             }
>
>               rc = qed_mcp_update_pending_cmd(p_hwfn, p_ptt);
> -             if (!rc)
> +             if (!rc) {
> +                     spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>                       break;
> -             else if (rc != -EAGAIN)
> +             } else if (rc != -EAGAIN) {
>                       goto err;
> +             }
>
>               spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>       } while (++cnt < max_retries);
> @@ -554,6 +564,7 @@ _qed_mcp_cmd_and_union(struct qed_hwfn *p_hwfn,
>               return -EAGAIN;
>       }
>
> +     spin_lock_bh(&p_hwfn->mcp_info->cmd_lock);
>       qed_mcp_cmd_del_elem(p_hwfn, p_cmd_elem);
>       spin_unlock_bh(&p_hwfn->mcp_info->cmd_lock);
>
> --
> 2.30.2

IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.

Re: [PATCH AUTOSEL 5.13 09/21] qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()

[Sasha Levin]

On Tue, Jul 27, 2021 at 01:30:15PM +0000, Justin He wrote:
>Hi, Sasha
>
>> -----Original Message-----
>> From: Sasha Levin <sashal@kernel.org>
>> Sent: Tuesday, July 27, 2021 9:19 PM
>> To: linux-kernel@vger.kernel.org; stable@vger.kernel.org
>> Cc: Justin He <Justin.He@arm.com>; Lijian Zhang <Lijian.Zhang@arm.com>;
>> David S . Miller <davem@davemloft.net>; Sasha Levin <sashal@kernel.org>;
>> netdev@vger.kernel.org
>> Subject: [PATCH AUTOSEL 5.13 09/21] qed: fix possible unpaired
>> spin_{un}lock_bh in _qed_mcp_cmd_and_union()
>>
>> From: Jia He <justin.he@arm.com>
>If possible, please stop taking this commit to any stable version because
>it has been reverted by later commit.

Will do, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.13 10/21] ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend

[Sasha Levin]

From: Oder Chiou <oder_chiou@realtek.com>

[ Upstream commit 6a503e1c455316fd0bfd8188c0a62cce7c5525ca ]

While using the DMIC recording, the garbled data will be captured by the
DMIC. It is caused by the critical power of PLL closed in the jack detect
function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20210716085853.20170-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/rt5682.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index e4c91571abae..abcd6f483788 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -973,10 +973,14 @@ int rt5682_headset_detect(struct snd_soc_component *component, int jack_insert)
 		rt5682_enable_push_button_irq(component, false);
 		snd_soc_component_update_bits(component, RT5682_CBJ_CTRL_1,
 			RT5682_TRIG_JD_MASK, RT5682_TRIG_JD_LOW);
-		if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS"))
+		if (!snd_soc_dapm_get_pin_status(dapm, "MICBIAS") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL1") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL2B"))
 			snd_soc_component_update_bits(component,
 				RT5682_PWR_ANLG_1, RT5682_PWR_MB, 0);
-		if (!snd_soc_dapm_get_pin_status(dapm, "Vref2"))
+		if (!snd_soc_dapm_get_pin_status(dapm, "Vref2") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL1") &&
+			!snd_soc_dapm_get_pin_status(dapm, "PLL2B"))
 			snd_soc_component_update_bits(component,
 				RT5682_PWR_ANLG_1, RT5682_PWR_VREF2, 0);
 		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
-- 
2.30.2

[PATCH AUTOSEL 5.13 11/21] mt7530 fix mt7530_fdb_write vid missing ivl bit

[Sasha Levin]

From: Eric Woudstra <ericwouds@gmail.com>

[ Upstream commit 11d8d98cbeef1496469b268d79938b05524731e8 ]

According to reference guides mt7530 (mt7620) and mt7531:

NOTE: When IVL is reset, MAC[47:0] and FID[2:0] will be used to
read/write the address table. When IVL is set, MAC[47:0] and CVID[11:0]
will be used to read/write the address table.

Since the function only fills in CVID and no FID, we need to set the
IVL bit. The existing code does not set it.

This is a fix for the issue I dropped here earlier:

http://lists.infradead.org/pipermail/linux-mediatek/2021-June/025697.html

With this patch, it is now possible to delete the 'self' fdb entry
manually. However, wifi roaming still has the same issue, the entry
does not get deleted automatically. Wifi roaming also needs a fix
somewhere else to function correctly in combination with vlan.

Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/mt7530.c | 1 +
 drivers/net/dsa/mt7530.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 9b90f3d3a8f5..5ee7089da37c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -365,6 +365,7 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
 	int i;
 
 	reg[1] |= vid & CVID_MASK;
+	reg[1] |= ATA2_IVL;
 	reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
 	reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
 	/* STATIC_ENT indicate that entry is static wouldn't
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 0204da486f3a..ebb86a646c7b 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -78,6 +78,7 @@ enum mt753x_bpdu_port_fw {
 #define  STATIC_EMP			0
 #define  STATIC_ENT			3
 #define MT7530_ATA2			0x78
+#define  ATA2_IVL			BIT(15)
 
 /* Register for address table write data */
 #define MT7530_ATWD			0x7c
-- 
2.30.2

[PATCH AUTOSEL 5.13 12/21] net: Fix zero-copy head len calculation.

[Sasha Levin]

From: Pravin B Shelar <pshelar@ovn.org>

[ Upstream commit a17ad0961706244dce48ec941f7e476a38c0e727 ]

In some cases skb head could be locked and entire header
data is pulled from skb. When skb_zerocopy() called in such cases,
following BUG is triggered. This patch fixes it by copying entire
skb in such cases.
This could be optimized incase this is performance bottleneck.

---8<---
kernel BUG at net/core/skbuff.c:2961!
invalid opcode: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Tainted: G           OE     5.4.0-77-generic #86-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:skb_zerocopy+0x37a/0x3a0
RSP: 0018:ffffbcc70013ca38 EFLAGS: 00010246
Call Trace:
 <IRQ>
 queue_userspace_packet+0x2af/0x5e0 [openvswitch]
 ovs_dp_upcall+0x3d/0x60 [openvswitch]
 ovs_dp_process_packet+0x125/0x150 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 netdev_port_receive+0x87/0x130 [openvswitch]
 netdev_frame_hook+0x4b/0x60 [openvswitch]
 __netif_receive_skb_core+0x2b4/0xc90
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x18/0x60
 process_backlog+0xa9/0x160
 net_rx_action+0x142/0x390
 __do_softirq+0xe1/0x2d6
 irq_exit+0xae/0xb0
 do_IRQ+0x5a/0xf0
 common_interrupt+0xf/0xf

Code that triggered BUG:
int
skb_zerocopy(struct sk_buff *to, struct sk_buff *from, int len, int hlen)
{
        int i, j = 0;
        int plen = 0; /* length of skb->head fragment */
        int ret;
        struct page *page;
        unsigned int offset;

        BUG_ON(!from->head_frag && !hlen);

Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/skbuff.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index bbc3b4b62032..abb45c1a2468 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3005,8 +3005,11 @@ skb_zerocopy_headlen(const struct sk_buff *from)
 
 	if (!from->head_frag ||
 	    skb_headlen(from) < L1_CACHE_BYTES ||
-	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS)
+	    skb_shinfo(from)->nr_frags >= MAX_SKB_FRAGS) {
 		hlen = skb_headlen(from);
+		if (!hlen)
+			hlen = from->len;
+	}
 
 	if (skb_has_frag_list(from))
 		hlen = from->len;
-- 
2.30.2

[PATCH AUTOSEL 5.13 13/21] ASoC: ti: j721e-evm: Fix unbalanced domain activity tracking during startup

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@gmail.com>

[ Upstream commit 78d2a05ef22e7b5863b01e073dd6a06b3979bb00 ]

In case of an error within j721e_audio_startup() the domain->active must
be decremented to avoid unbalanced counter.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210717122820.1467-2-peter.ujfalusi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/j721e-evm.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/sound/soc/ti/j721e-evm.c b/sound/soc/ti/j721e-evm.c
index a7c0484d44ec..017c4ad11ca6 100644
--- a/sound/soc/ti/j721e-evm.c
+++ b/sound/soc/ti/j721e-evm.c
@@ -278,23 +278,29 @@ static int j721e_audio_startup(struct snd_pcm_substream *substream)
 					  j721e_rule_rate, &priv->rate_range,
 					  SNDRV_PCM_HW_PARAM_RATE, -1);
 
-	mutex_unlock(&priv->mutex);
 
 	if (ret)
-		return ret;
+		goto out;
 
 	/* Reset TDM slots to 32 */
 	ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0x3, 0x3, 2, 32);
 	if (ret && ret != -ENOTSUPP)
-		return ret;
+		goto out;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
 		ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x3, 0x3, 2, 32);
 		if (ret && ret != -ENOTSUPP)
-			return ret;
+			goto out;
 	}
 
-	return 0;
+	if (ret == -ENOTSUPP)
+		ret = 0;
+out:
+	if (ret)
+		domain->active--;
+	mutex_unlock(&priv->mutex);
+
+	return ret;
 }
 
 static int j721e_audio_hw_params(struct snd_pcm_substream *substream,
-- 
2.30.2

[PATCH AUTOSEL 5.13 14/21] ASoC: ti: j721e-evm: Check for not initialized parent_clk_id

[Sasha Levin]

From: Peter Ujfalusi <peter.ujfalusi@gmail.com>

[ Upstream commit 82d28b67f780910f816fe1cfb0f676fc38c4cbb3 ]

During probe the parent_clk_id is set to -1 which should not be used to
array index within hsdiv_rates[].

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210717122820.1467-3-peter.ujfalusi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/ti/j721e-evm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/ti/j721e-evm.c b/sound/soc/ti/j721e-evm.c
index 017c4ad11ca6..265bbc5a2f96 100644
--- a/sound/soc/ti/j721e-evm.c
+++ b/sound/soc/ti/j721e-evm.c
@@ -197,7 +197,7 @@ static int j721e_configure_refclk(struct j721e_priv *priv,
 		return ret;
 	}
 
-	if (priv->hsdiv_rates[domain->parent_clk_id] != scki) {
+	if (domain->parent_clk_id == -1 || priv->hsdiv_rates[domain->parent_clk_id] != scki) {
 		dev_dbg(priv->dev,
 			"%s configuration for %u Hz: %s, %dxFS (SCKI: %u Hz)\n",
 			audio_domain == J721E_AUDIO_DOMAIN_CPB ? "CPB" : "IVI",
-- 
2.30.2

[PATCH AUTOSEL 5.13 15/21] efi/mokvar: Reserve the table only if it is in boot services data

[Sasha Levin]

From: Borislav Petkov <bp@suse.de>

[ Upstream commit 47e1e233e9d822dfda068383fb9a616451bda703 ]

One of the SUSE QA tests triggered:

  localhost kernel: efi: Failed to lookup EFI memory descriptor for 0x000000003dcf8000

which comes from x86's version of efi_arch_mem_reserve() trying to
reserve a memory region. Usually, that function expects
EFI_BOOT_SERVICES_DATA memory descriptors but the above case is for the
MOKvar table which is allocated in the EFI shim as runtime services.

That lead to a fix changing the allocation of that table to boot services.

However, that fix broke booting SEV guests with that shim leading to
this kernel fix

  8d651ee9c71b ("x86/ioremap: Map EFI-reserved memory as encrypted for SEV")

which extended the ioremap hint to map reserved EFI boot services as
decrypted too.

However, all that wasn't needed, IMO, because that error message in
efi_arch_mem_reserve() was innocuous in this case - if the MOKvar table
is not in boot services, then it doesn't need to be reserved in the
first place because it is, well, in runtime services which *should* be
reserved anyway.

So do that reservation for the MOKvar table only if it is allocated
in boot services data. I couldn't find any requirement about where
that table should be allocated in, unlike the ESRT which allocation is
mandated to be done in boot services data by the UEFI spec.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/mokvar-table.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/efi/mokvar-table.c b/drivers/firmware/efi/mokvar-table.c
index d8bc01340686..38722d2009e2 100644
--- a/drivers/firmware/efi/mokvar-table.c
+++ b/drivers/firmware/efi/mokvar-table.c
@@ -180,7 +180,10 @@ void __init efi_mokvar_table_init(void)
 		pr_err("EFI MOKvar config table is not valid\n");
 		return;
 	}
-	efi_mem_reserve(efi.mokvar_table, map_size_needed);
+
+	if (md.type == EFI_BOOT_SERVICES_DATA)
+		efi_mem_reserve(efi.mokvar_table, map_size_needed);
+
 	efi_mokvar_table_size = map_size_needed;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.13 16/21] nvme: fix nvme_setup_command metadata trace event

[Sasha Levin]

From: Keith Busch <kbusch@kernel.org>

[ Upstream commit 234211b8dd161fa25f192c78d5a8d2dd6bf920a0 ]

The metadata address is set after the trace event, so the trace is not
capturing anything useful. Rather than logging the memory address, it's
useful to know if the command carries a metadata payload, so change the
trace event to log that true/false state instead.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/trace.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/trace.h b/drivers/nvme/host/trace.h
index daaf700eae79..35bac7a25422 100644
--- a/drivers/nvme/host/trace.h
+++ b/drivers/nvme/host/trace.h
@@ -56,7 +56,7 @@ TRACE_EVENT(nvme_setup_cmd,
 		__field(u8, fctype)
 		__field(u16, cid)
 		__field(u32, nsid)
-		__field(u64, metadata)
+		__field(bool, metadata)
 		__array(u8, cdw10, 24)
 	    ),
 	    TP_fast_assign(
@@ -66,13 +66,13 @@ TRACE_EVENT(nvme_setup_cmd,
 		__entry->flags = cmd->common.flags;
 		__entry->cid = cmd->common.command_id;
 		__entry->nsid = le32_to_cpu(cmd->common.nsid);
-		__entry->metadata = le64_to_cpu(cmd->common.metadata);
+		__entry->metadata = !!blk_integrity_rq(req);
 		__entry->fctype = cmd->fabrics.fctype;
 		__assign_disk_name(__entry->disk, req->rq_disk);
 		memcpy(__entry->cdw10, &cmd->common.cdw10,
 			sizeof(__entry->cdw10));
 	    ),
-	    TP_printk("nvme%d: %sqid=%d, cmdid=%u, nsid=%u, flags=0x%x, meta=0x%llx, cmd=(%s %s)",
+	    TP_printk("nvme%d: %sqid=%d, cmdid=%u, nsid=%u, flags=0x%x, meta=0x%x, cmd=(%s %s)",
 		      __entry->ctrl_id, __print_disk_name(__entry->disk),
 		      __entry->qid, __entry->cid, __entry->nsid,
 		      __entry->flags, __entry->metadata,
-- 
2.30.2

[PATCH AUTOSEL 5.13 17/21] drm/amd/display: Fix comparison error in dcn21 DML

[Sasha Levin]

From: Victor Lu <victorchengchi.lu@amd.com>

[ Upstream commit ec3102dc6b36c692104c4a0546d4119de59a3bc1 ]

[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.

[how]
Correct "<" to "<="

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
index 398210d1af34..f49743929357 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn21/display_mode_vba_21.c
@@ -4889,7 +4889,7 @@ void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l
 				}
 			} while ((locals->PrefetchSupported[i][j] != true || locals->VRatioInPrefetchSupported[i][j] != true)
 					&& (mode_lib->vba.NextMaxVStartup != mode_lib->vba.MaxMaxVStartup[0][0]
-						|| mode_lib->vba.NextPrefetchMode < mode_lib->vba.MaxPrefetchMode));
+						|| mode_lib->vba.NextPrefetchMode <= mode_lib->vba.MaxPrefetchMode));
 
 			if (locals->PrefetchSupported[i][j] == true && locals->VRatioInPrefetchSupported[i][j] == true) {
 				mode_lib->vba.BandwidthAvailableForImmediateFlip = locals->ReturnBWPerState[i][0];
-- 
2.30.2

[PATCH AUTOSEL 5.13 18/21] drm/amd/display: Fix max vstartup calculation for modes with borders

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit d7940911fc0754d99b208f0e3098762d39f403a0 ]

[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.

Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.

An example of such a timing would be 640x480@72Hz:

h_total: 832
h_border_left: 8
h_addressable: 640
h_border_right: 8
h_front_porch: 16
h_sync_width: 40
v_total: 520
v_border_top: 8
v_addressable: 480
v_border_bottom: 8
v_front_porch: 1
v_sync_width: 3
pix_clk_100hz: 315000

[How]
Include borders as part of destination vactive/hactive.

This change DCN20+ so it has wide impact, but the destination vactive
and hactive are only really used for vstartup calculation anyway.

Most modes do not have vertical or horizontal borders.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index d7d70b9bb387..81f583733fa8 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2093,8 +2093,10 @@ int dcn20_populate_dml_pipes_from_context(
 				- timing->v_border_bottom;
 		pipes[pipe_cnt].pipe.dest.htotal = timing->h_total;
 		pipes[pipe_cnt].pipe.dest.vtotal = v_total;
-		pipes[pipe_cnt].pipe.dest.hactive = timing->h_addressable;
-		pipes[pipe_cnt].pipe.dest.vactive = timing->v_addressable;
+		pipes[pipe_cnt].pipe.dest.hactive =
+			timing->h_addressable + timing->h_border_left + timing->h_border_right;
+		pipes[pipe_cnt].pipe.dest.vactive =
+			timing->v_addressable + timing->v_border_top + timing->v_border_bottom;
 		pipes[pipe_cnt].pipe.dest.interlaced = timing->flags.INTERLACE;
 		pipes[pipe_cnt].pipe.dest.pixel_rate_mhz = timing->pix_clk_100hz/10000.0;
 		if (timing->timing_3d_format == TIMING_3D_FORMAT_HW_FRAME_PACKING)
-- 
2.30.2

[PATCH AUTOSEL 5.13 19/21] io_uring: never attempt iopoll reissue from release path

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 3c30ef0f78cfb36fdb13753794b0384cf7e37cc9 ]

There are two reasons why this shouldn't be done:

1) Ring is exiting, and we're canceling requests anyway. Any request
   should be canceled anyway. In theory, this could iterate for a
   number of times if someone else is also driving the target block
   queue into request starvation, however the likelihood of this
   happening is miniscule.

2) If the original task decided to pass the ring to another task, then
   we don't want to be reissuing from this context as it may be an
   unrelated task or context. No assumptions should be made about
   the context in which ->release() is run. This can only happen for pure
   read/write, and we'll get -EFAULT on them anyway.

Link: https://lore.kernel.org/io-uring/YPr4OaHv0iv0KTOc@zeniv-ca.linux.org.uk/
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index eeea6b8c8bee..7ae6043e7909 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -2240,7 +2240,7 @@ static inline bool io_run_task_work(void)
  * Find and free completed poll iocbs
  */
 static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
-			       struct list_head *done)
+			       struct list_head *done, bool resubmit)
 {
 	struct req_batch rb;
 	struct io_kiocb *req;
@@ -2255,7 +2255,7 @@ static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
 		req = list_first_entry(done, struct io_kiocb, inflight_entry);
 		list_del(&req->inflight_entry);
 
-		if (READ_ONCE(req->result) == -EAGAIN &&
+		if (READ_ONCE(req->result) == -EAGAIN && resubmit &&
 		    !(req->flags & REQ_F_DONT_REISSUE)) {
 			req->iopoll_completed = 0;
 			req_ref_get(req);
@@ -2279,7 +2279,7 @@ static void io_iopoll_complete(struct io_ring_ctx *ctx, unsigned int *nr_events,
 }
 
 static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
-			long min)
+			long min, bool resubmit)
 {
 	struct io_kiocb *req, *tmp;
 	LIST_HEAD(done);
@@ -2322,7 +2322,7 @@ static int io_do_iopoll(struct io_ring_ctx *ctx, unsigned int *nr_events,
 	}
 
 	if (!list_empty(&done))
-		io_iopoll_complete(ctx, nr_events, &done);
+		io_iopoll_complete(ctx, nr_events, &done, resubmit);
 
 	return ret;
 }
@@ -2340,7 +2340,7 @@ static void io_iopoll_try_reap_events(struct io_ring_ctx *ctx)
 	while (!list_empty(&ctx->iopoll_list)) {
 		unsigned int nr_events = 0;
 
-		io_do_iopoll(ctx, &nr_events, 0);
+		io_do_iopoll(ctx, &nr_events, 0, false);
 
 		/* let it sleep and repeat later if can't complete a request */
 		if (nr_events == 0)
@@ -2398,7 +2398,7 @@ static int io_iopoll_check(struct io_ring_ctx *ctx, long min)
 			if (list_empty(&ctx->iopoll_list))
 				break;
 		}
-		ret = io_do_iopoll(ctx, &nr_events, min);
+		ret = io_do_iopoll(ctx, &nr_events, min, true);
 	} while (!ret && nr_events < min && !need_resched());
 out:
 	mutex_unlock(&ctx->uring_lock);
@@ -6781,7 +6781,7 @@ static int __io_sq_thread(struct io_ring_ctx *ctx, bool cap_entries)
 
 		mutex_lock(&ctx->uring_lock);
 		if (!list_empty(&ctx->iopoll_list))
-			io_do_iopoll(ctx, &nr_events, 0);
+			io_do_iopoll(ctx, &nr_events, 0, true);
 
 		/*
 		 * Don't submit if refs are dying, good for io_uring_register(),
-- 
2.30.2

[PATCH AUTOSEL 5.13 20/21] io_uring: explicitly catch any illegal async queue attempt

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit 991468dcf198bb87f24da330676724a704912b47 ]

Catch an illegal case to queue async from an unrelated task that got
the ring fd passed to it. This should not be possible to hit, but
better be proactive and catch it explicitly. io-wq is extended to
check for early IO_WQ_WORK_CANCEL being set on a work item as well,
so it can run the request through the normal cancelation path.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io-wq.c    |  7 ++++++-
 fs/io_uring.c | 11 +++++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/fs/io-wq.c b/fs/io-wq.c
index 60f58efdb5f4..9efecdf025b9 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -736,7 +736,12 @@ static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work)
 	int work_flags;
 	unsigned long flags;
 
-	if (test_bit(IO_WQ_BIT_EXIT, &wqe->wq->state)) {
+	/*
+	 * If io-wq is exiting for this task, or if the request has explicitly
+	 * been marked as one that should not get executed, cancel it here.
+	 */
+	if (test_bit(IO_WQ_BIT_EXIT, &wqe->wq->state) ||
+	    (work->flags & IO_WQ_WORK_CANCEL)) {
 		io_run_cancel(work, wqe);
 		return;
 	}
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 7ae6043e7909..5f6514185a3a 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -1273,6 +1273,17 @@ static void io_queue_async_work(struct io_kiocb *req)
 
 	/* init ->work of the whole link before punting */
 	io_prep_async_link(req);
+
+	/*
+	 * Not expected to happen, but if we do have a bug where this _can_
+	 * happen, catch it here and ensure the request is marked as
+	 * canceled. That will make io-wq go through the usual work cancel
+	 * procedure rather than attempt to run this request (or create a new
+	 * worker for it).
+	 */
+	if (WARN_ON_ONCE(!same_thread_group(req->task, current)))
+		req->work.flags |= IO_WQ_WORK_CANCEL;
+
 	trace_io_uring_queue_async_work(ctx, io_wq_is_hashed(&req->work), req,
 					&req->work, req->flags);
 	io_wq_enqueue(tctx->io_wq, &req->work);
-- 
2.30.2

[PATCH AUTOSEL 5.13 21/21] ACPI: fix NULL pointer dereference

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit fc68f42aa737dc15e7665a4101d4168aadb8e4c4 ]

Commit 71f642833284 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL.  That fails miserably, because that helper
inline function is not set up to handle that case.

Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.

Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/acpi/acpi_bus.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 3a82faac5767..cd98af6ba155 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -716,7 +716,8 @@ static inline struct acpi_device *acpi_dev_get(struct acpi_device *adev)
 
 static inline void acpi_dev_put(struct acpi_device *adev)
 {
-	put_device(&adev->dev);
+	if (adev)
+		put_device(&adev->dev);
 }
 #else	/* CONFIG_ACPI */
 
-- 
2.30.2