* [PATCH v4 0/3] Renesas RZ/G2L ADC driver support
@ 2021-08-04 20:21 Lad Prabhakar
2021-08-04 20:21 ` [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter Lad Prabhakar
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Lad Prabhakar @ 2021-08-04 20:21 UTC (permalink / raw)
To: Jonathan Cameron, Geert Uytterhoeven, Rob Herring,
Lars-Peter Clausen, Magnus Damm, Philipp Zabel,
Alexandru Ardelean, linux-iio, devicetree, linux-renesas-soc
Cc: linux-kernel, Prabhakar, Biju Das, Lad Prabhakar
Hi All,
This patch series adds ADC support for Renesas RZ/G2L family.
Patches apply on top of v5.14-rc2.
Cheers,
Prabhakar
Changes for v4:
* Fixed registering action to assert resets on failure/remove
as reported by Philip.
* Fixed review comments suggested by Jonathan.
* Included RB tag from Rob for patch 1/3
* Note DTS patch applies on top of https://git.kernel.org/pub/scm/
linux/kernel/git/geert/renesas-devel.git/log/
?h=renesas-arm-dt-for-v5.15
Changes for v3 (as requested by Jonathan):
* Made use of FIELD_PREP()
* Renamed _CLEAR to _MASK and inverted inline as required
* Moved |= pair's on same lines
* Made use of sysfs_emit() while reading the labels
* Used for_each_bit_set() in rzg2l_adc_isr()
* Renamed rzg2l_adc_parse_of() -> rzg2l_adc_parse_properties()
* Used devm_add_action_or_reset() for asserting the reset signals and
disabling pm_runtime and eventually removing remove() callback
* Added comments in isr handler for channel select interrupt
* Moved enabling/disabling of pclk during hw init in rzg2l_adc_hw_init()
* Dropped clock patch 3/4 (https://lore.kernel.org/patchwork/patch/1462152/)
from previous series as its queued up in renesas-clk-for-v5.15
Changes for v2:
* Update binding doc, dropped gpios/renesas-rzg2l,adc-trigger-mode
properties included channel property to represent each wired channel.
* Fixed review comments pointed by Alexandru, implemented pm runtime
support, dropped mlock usage
* Fixed review comments pointed by Jonathan, renamed the macros,
simplified the code.
* Included clock and DT patches
v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/
20210629220328.13366-1-prabhakar.mahadev-lad.rj@bp.renesas.com/
Lad Prabhakar (3):
dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L
A/D converter
iio: adc: Add driver for Renesas RZ/G2L A/D converter
arm64: dts: renesas: r9a07g044: Add ADC node
.../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++
MAINTAINERS | 8 +
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++
6 files changed, 795 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
create mode 100644 drivers/iio/adc/rzg2l_adc.c
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter 2021-08-04 20:21 [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar @ 2021-08-04 20:21 ` Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 2/3] iio: adc: Add driver " Lad Prabhakar ` (2 subsequent siblings) 3 siblings, 0 replies; 8+ messages in thread From: Lad Prabhakar @ 2021-08-04 20:21 UTC (permalink / raw) To: Jonathan Cameron, Geert Uytterhoeven, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, devicetree, linux-renesas-soc Cc: linux-kernel, Prabhakar, Biju Das, Lad Prabhakar Add binding documentation for Renesas RZ/G2L A/D converter block. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> --- v3-->v4: * Included RB tag from Rob --- .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++++++++++++++++ 1 file changed, 134 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml new file mode 100644 index 000000000000..c80201d6a716 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,rzg2l-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L ADC + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: | + A/D Converter block is a successive approximation analog-to-digital converter + with a 12-bit accuracy. Up to eight analog input channels can be selected. + Conversions can be performed in single or repeat mode. Result of the ADC is + stored in a 32-bit data register corresponding to each channel. + +properties: + compatible: + items: + - enum: + - renesas,r9a07g044-adc # RZ/G2{L,LC} + - const: renesas,rzg2l-adc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: converter clock + - description: peripheral clock + + clock-names: + items: + - const: adclk + - const: pclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: presetn + - const: adrst-n + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + +patternProperties: + "^channel@[0-7]$": + $ref: "adc.yaml" + type: object + description: | + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: | + The channel number. It can have up to 8 channels numbered from 0 to 7. + items: + - minimum: 0 + maximum: 7 + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a07g044-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + adc: adc@10059000 { + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; + reg = <0x10059000 0x400>; + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G044_ADC_PCLK>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A07G044_ADC_PRESETN>, + <&cpg R9A07G044_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 2/3] iio: adc: Add driver for Renesas RZ/G2L A/D converter 2021-08-04 20:21 [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter Lad Prabhakar @ 2021-08-04 20:21 ` Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node Lad Prabhakar 2021-08-08 17:01 ` [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Jonathan Cameron 3 siblings, 0 replies; 8+ messages in thread From: Lad Prabhakar @ 2021-08-04 20:21 UTC (permalink / raw) To: Jonathan Cameron, Geert Uytterhoeven, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, devicetree, linux-renesas-soc Cc: linux-kernel, Prabhakar, Biju Das, Lad Prabhakar Add ADC driver support for Renesas RZ/G2L A/D converter in SW trigger mode. A/D Converter block is a successive approximation analog-to-digital converter with a 12-bit accuracy and supports a maximum of 8 input channels. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> --- v3->v4 * Included bitfield.h * Set pm_runtime to suspended before enabling * Added callback to set pm_runtime to suspended on failure/remove() * Drop if bit set check from rzg2l_adc_isr() * Changed to sequence of calling action_or_reset for asserting resets * Requesting the IRQ resource prior to requesting IRQ handler * Dropped usage of iio_device_claim_direct_mode()/iio_device_release_direct_mode() instead using drivers own lock * Dropped explicit cast in rzg2l_adc_isr() * Dropped local variable from rzg2l_adc_reset_assert() * Dropped warn message upon failure to register action * For rzg2l_adc_pm_runtime_disable() registered a action with dev instead of indio_dev --- MAINTAINERS | 8 + drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++++++++++++++++++++ 4 files changed, 619 insertions(+) create mode 100644 drivers/iio/adc/rzg2l_adc.c diff --git a/MAINTAINERS b/MAINTAINERS index c9467d2839f5..557daac9f1f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15848,6 +15848,14 @@ L: linux-renesas-soc@vger.kernel.org S: Maintained F: drivers/phy/renesas/phy-rcar-gen3-usb*.c +RENESAS RZ/G2L A/D DRIVER +M: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> +L: linux-iio@vger.kernel.org +L: linux-renesas-soc@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml +F: drivers/iio/adc/rzg2l_adc.c + RESET CONTROLLER FRAMEWORK M: Philipp Zabel <p.zabel@pengutronix.de> S: Maintained diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index db0c8fb60515..af168e1c9fdb 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -887,6 +887,16 @@ config ROCKCHIP_SARADC To compile this driver as a module, choose M here: the module will be called rockchip_saradc. +config RZG2L_ADC + tristate "Renesas RZ/G2L ADC driver" + depends on ARCH_R9A07G044 || COMPILE_TEST + help + Say yes here to build support for the ADC found in Renesas + RZ/G2L family. + + To compile this driver as a module, choose M here: the + module will be called rzg2l_adc. + config SC27XX_ADC tristate "Spreadtrum SC27xx series PMICs ADC" depends on MFD_SC27XX_PMIC || COMPILE_TEST diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index f70d877c555a..d68550f493e3 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -82,6 +82,7 @@ obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o +obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o obj-$(CONFIG_STX104) += stx104.o diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c new file mode 100644 index 000000000000..9996d5eef289 --- /dev/null +++ b/drivers/iio/adc/rzg2l_adc.c @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RZ/G2L A/D Converter driver + * + * Copyright (c) 2021 Renesas Electronics Europe GmbH + * + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/reset.h> + +#define DRIVER_NAME "rzg2l-adc" + +#define RZG2L_ADM(n) ((n) * 0x4) +#define RZG2L_ADM0_ADCE BIT(0) +#define RZG2L_ADM0_ADBSY BIT(1) +#define RZG2L_ADM0_PWDWNB BIT(2) +#define RZG2L_ADM0_SRESB BIT(15) +#define RZG2L_ADM1_TRG BIT(0) +#define RZG2L_ADM1_MS BIT(2) +#define RZG2L_ADM1_BS BIT(4) +#define RZG2L_ADM1_EGA_MASK GENMASK(13, 12) +#define RZG2L_ADM2_CHSEL_MASK GENMASK(7, 0) +#define RZG2L_ADM3_ADIL_MASK GENMASK(31, 24) +#define RZG2L_ADM3_ADCMP_MASK GENMASK(23, 16) +#define RZG2L_ADM3_ADCMP_E FIELD_PREP(RZG2L_ADM3_ADCMP_MASK, 0xe) +#define RZG2L_ADM3_ADSMP_MASK GENMASK(15, 0) + +#define RZG2L_ADINT 0x20 +#define RZG2L_ADINT_INTEN_MASK GENMASK(7, 0) +#define RZG2L_ADINT_CSEEN BIT(16) +#define RZG2L_ADINT_INTS BIT(31) + +#define RZG2L_ADSTS 0x24 +#define RZG2L_ADSTS_CSEST BIT(16) +#define RZG2L_ADSTS_INTST_MASK GENMASK(7, 0) + +#define RZG2L_ADIVC 0x28 +#define RZG2L_ADIVC_DIVADC_MASK GENMASK(8, 0) +#define RZG2L_ADIVC_DIVADC_4 FIELD_PREP(RZG2L_ADIVC_DIVADC_MASK, 0x4) + +#define RZG2L_ADFIL 0x2c + +#define RZG2L_ADCR(n) (0x30 + ((n) * 0x4)) +#define RZG2L_ADCR_AD_MASK GENMASK(11, 0) + +#define RZG2L_ADSMP_DEFUALT_SAMPLING 0x578 + +#define RZG2L_ADC_MAX_CHANNELS 8 +#define RZG2L_ADC_CHN_MASK 0x7 +#define RZG2L_ADC_TIMEOUT usecs_to_jiffies(1 * 4) + +struct rzg2l_adc_data { + const struct iio_chan_spec *channels; + u8 num_channels; +}; + +struct rzg2l_adc { + void __iomem *base; + struct clk *pclk; + struct clk *adclk; + struct reset_control *presetn; + struct reset_control *adrstn; + struct completion completion; + const struct rzg2l_adc_data *data; + struct mutex lock; + u16 last_val[RZG2L_ADC_MAX_CHANNELS]; +}; + +static const char * const rzg2l_adc_channel_name[] = { + "adc0", + "adc1", + "adc2", + "adc3", + "adc4", + "adc5", + "adc6", + "adc7", +}; + +static unsigned int rzg2l_adc_readl(struct rzg2l_adc *adc, u32 reg) +{ + return readl(adc->base + reg); +} + +static void rzg2l_adc_writel(struct rzg2l_adc *adc, unsigned int reg, u32 val) +{ + writel(val, adc->base + reg); +} + +static void rzg2l_adc_pwr(struct rzg2l_adc *adc, bool on) +{ + u32 reg; + + reg = rzg2l_adc_readl(adc, RZG2L_ADM(0)); + if (on) + reg |= RZG2L_ADM0_PWDWNB; + else + reg &= ~RZG2L_ADM0_PWDWNB; + rzg2l_adc_writel(adc, RZG2L_ADM(0), reg); + udelay(2); +} + +static void rzg2l_adc_start_stop(struct rzg2l_adc *adc, bool start) +{ + int timeout = 5; + u32 reg; + + reg = rzg2l_adc_readl(adc, RZG2L_ADM(0)); + if (start) + reg |= RZG2L_ADM0_ADCE; + else + reg &= ~RZG2L_ADM0_ADCE; + rzg2l_adc_writel(adc, RZG2L_ADM(0), reg); + + if (start) + return; + + do { + usleep_range(100, 200); + reg = rzg2l_adc_readl(adc, RZG2L_ADM(0)); + timeout--; + if (!timeout) { + pr_err("%s stopping ADC timed out\n", __func__); + break; + } + } while (((reg & RZG2L_ADM0_ADBSY) || (reg & RZG2L_ADM0_ADCE))); +} + +static void rzg2l_set_trigger(struct rzg2l_adc *adc) +{ + u32 reg; + + /* + * Setup ADM1 for SW trigger + * EGA[13:12] - Set 00 to indicate hardware trigger is invalid + * BS[4] - Enable 1-buffer mode + * MS[1] - Enable Select mode + * TRG[0] - Enable software trigger mode + */ + reg = rzg2l_adc_readl(adc, RZG2L_ADM(1)); + reg &= ~RZG2L_ADM1_EGA_MASK; + reg &= ~RZG2L_ADM1_BS; + reg &= ~RZG2L_ADM1_TRG; + reg |= RZG2L_ADM1_MS; + rzg2l_adc_writel(adc, RZG2L_ADM(1), reg); +} + +static int rzg2l_adc_conversion_setup(struct rzg2l_adc *adc, u8 ch) +{ + u32 reg; + + if (rzg2l_adc_readl(adc, RZG2L_ADM(0)) & RZG2L_ADM0_ADBSY) + return -EBUSY; + + rzg2l_set_trigger(adc); + + /* Select analog input channel subjected to conversion. */ + reg = rzg2l_adc_readl(adc, RZG2L_ADM(2)); + reg &= ~RZG2L_ADM2_CHSEL_MASK; + reg |= BIT(ch); + rzg2l_adc_writel(adc, RZG2L_ADM(2), reg); + + /* + * Setup ADINT + * INTS[31] - Select pulse signal + * CSEEN[16] - Enable channel select error interrupt + * INTEN[7:0] - Select channel interrupt + */ + reg = rzg2l_adc_readl(adc, RZG2L_ADINT); + reg &= ~RZG2L_ADINT_INTS; + reg &= ~RZG2L_ADINT_INTEN_MASK; + reg |= (RZG2L_ADINT_CSEEN | BIT(ch)); + rzg2l_adc_writel(adc, RZG2L_ADINT, reg); + + return 0; +} + +static int rzg2l_adc_set_power(struct iio_dev *indio_dev, bool on) +{ + struct device *dev = indio_dev->dev.parent; + + if (on) + return pm_runtime_resume_and_get(dev); + + return pm_runtime_put_sync(dev); +} + +static int rzg2l_adc_conversion(struct iio_dev *indio_dev, struct rzg2l_adc *adc, u8 ch) +{ + int ret; + + ret = rzg2l_adc_set_power(indio_dev, true); + if (ret) + return ret; + + ret = rzg2l_adc_conversion_setup(adc, ch); + if (ret) { + rzg2l_adc_set_power(indio_dev, false); + return ret; + } + + reinit_completion(&adc->completion); + + rzg2l_adc_start_stop(adc, true); + + if (!wait_for_completion_timeout(&adc->completion, RZG2L_ADC_TIMEOUT)) { + rzg2l_adc_writel(adc, RZG2L_ADINT, + rzg2l_adc_readl(adc, RZG2L_ADINT) & ~RZG2L_ADINT_INTEN_MASK); + rzg2l_adc_start_stop(adc, false); + rzg2l_adc_set_power(indio_dev, false); + return -ETIMEDOUT; + } + + return rzg2l_adc_set_power(indio_dev, false); +} + +static int rzg2l_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct rzg2l_adc *adc = iio_priv(indio_dev); + int ret; + u8 ch; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type != IIO_VOLTAGE) + return -EINVAL; + + mutex_lock(&adc->lock); + ch = chan->channel & RZG2L_ADC_CHN_MASK; + ret = rzg2l_adc_conversion(indio_dev, adc, ch); + if (ret) { + mutex_unlock(&adc->lock); + return ret; + } + *val = adc->last_val[ch]; + mutex_unlock(&adc->lock); + + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int rzg2l_adc_read_label(struct iio_dev *iio_dev, + const struct iio_chan_spec *chan, + char *label) +{ + if (chan->channel >= RZG2L_ADC_MAX_CHANNELS) + return -EINVAL; + + return sysfs_emit(label, "%s\n", rzg2l_adc_channel_name[chan->channel]); +} + +static const struct iio_info rzg2l_adc_iio_info = { + .read_raw = rzg2l_adc_read_raw, + .read_label = rzg2l_adc_read_label, +}; + +static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id) +{ + struct rzg2l_adc *adc = dev_id; + unsigned long intst; + u32 reg; + int ch; + + reg = rzg2l_adc_readl(adc, RZG2L_ADSTS); + + /* A/D conversion channel select error interrupt */ + if (reg & RZG2L_ADSTS_CSEST) { + rzg2l_adc_writel(adc, RZG2L_ADSTS, reg); + return IRQ_HANDLED; + } + + intst = reg & RZG2L_ADSTS_INTST_MASK; + if (!intst) + return IRQ_NONE; + + for_each_set_bit(ch, &intst, RZG2L_ADC_MAX_CHANNELS) + adc->last_val[ch] = rzg2l_adc_readl(adc, RZG2L_ADCR(ch)) & RZG2L_ADCR_AD_MASK; + + /* clear the channel interrupt */ + rzg2l_adc_writel(adc, RZG2L_ADSTS, reg); + + complete(&adc->completion); + + return IRQ_HANDLED; +} + +static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l_adc *adc) +{ + struct iio_chan_spec *chan_array; + struct fwnode_handle *fwnode; + struct rzg2l_adc_data *data; + unsigned int channel; + int num_channels; + int ret; + u8 i; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + num_channels = device_get_child_node_count(&pdev->dev); + if (!num_channels) { + dev_err(&pdev->dev, "no channel children\n"); + return -ENODEV; + } + + if (num_channels > RZG2L_ADC_MAX_CHANNELS) { + dev_err(&pdev->dev, "num of channel children out of range\n"); + return -EINVAL; + } + + chan_array = devm_kcalloc(&pdev->dev, num_channels, sizeof(*chan_array), + GFP_KERNEL); + if (!chan_array) + return -ENOMEM; + + i = 0; + device_for_each_child_node(&pdev->dev, fwnode) { + ret = fwnode_property_read_u32(fwnode, "reg", &channel); + if (ret) + return ret; + + if (channel >= RZG2L_ADC_MAX_CHANNELS) + return -EINVAL; + + chan_array[i].type = IIO_VOLTAGE; + chan_array[i].indexed = 1; + chan_array[i].channel = channel; + chan_array[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + chan_array[i].datasheet_name = rzg2l_adc_channel_name[channel]; + i++; + } + + data->num_channels = num_channels; + data->channels = chan_array; + adc->data = data; + + return 0; +} + +static int rzg2l_adc_hw_init(struct rzg2l_adc *adc) +{ + int timeout = 5; + u32 reg; + int ret; + + ret = clk_prepare_enable(adc->pclk); + if (ret) + return ret; + + /* SW reset */ + reg = rzg2l_adc_readl(adc, RZG2L_ADM(0)); + reg |= RZG2L_ADM0_SRESB; + rzg2l_adc_writel(adc, RZG2L_ADM(0), reg); + + while (!(rzg2l_adc_readl(adc, RZG2L_ADM(0)) & RZG2L_ADM0_SRESB)) { + if (!timeout) { + ret = -EBUSY; + goto exit_hw_init; + } + timeout--; + usleep_range(100, 200); + } + + /* Only division by 4 can be set */ + reg = rzg2l_adc_readl(adc, RZG2L_ADIVC); + reg &= ~RZG2L_ADIVC_DIVADC_MASK; + reg |= RZG2L_ADIVC_DIVADC_4; + rzg2l_adc_writel(adc, RZG2L_ADIVC, reg); + + /* + * Setup AMD3 + * ADIL[31:24] - Should be always set to 0 + * ADCMP[23:16] - Should be always set to 0xe + * ADSMP[15:0] - Set default (0x578) sampling period + */ + reg = rzg2l_adc_readl(adc, RZG2L_ADM(3)); + reg &= ~RZG2L_ADM3_ADIL_MASK; + reg &= ~RZG2L_ADM3_ADCMP_MASK; + reg &= ~RZG2L_ADM3_ADSMP_MASK; + reg |= (RZG2L_ADM3_ADCMP_E | RZG2L_ADSMP_DEFUALT_SAMPLING); + rzg2l_adc_writel(adc, RZG2L_ADM(3), reg); + +exit_hw_init: + clk_disable_unprepare(adc->pclk); + + return 0; +} + +static void rzg2l_adc_pm_runtime_disable(void *data) +{ + struct device *dev = data; + + pm_runtime_disable(dev->parent); +} + +static void rzg2l_adc_pm_runtime_set_suspended(void *data) +{ + struct device *dev = data; + + pm_runtime_set_suspended(dev->parent); +} + +static void rzg2l_adc_reset_assert(void *data) +{ + reset_control_assert(data); +} + +static int rzg2l_adc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct rzg2l_adc *adc; + int ret; + int irq; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + + ret = rzg2l_adc_parse_properties(pdev, adc); + if (ret) + return ret; + + mutex_init(&adc->lock); + + adc->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(adc->base)) + return PTR_ERR(adc->base); + + adc->pclk = devm_clk_get(dev, "pclk"); + if (IS_ERR(adc->pclk)) { + dev_err(dev, "Failed to get pclk"); + return PTR_ERR(adc->pclk); + } + + adc->adclk = devm_clk_get(dev, "adclk"); + if (IS_ERR(adc->adclk)) { + dev_err(dev, "Failed to get adclk"); + return PTR_ERR(adc->adclk); + } + + adc->adrstn = devm_reset_control_get_exclusive(dev, "adrst-n"); + if (IS_ERR(adc->adrstn)) { + dev_err(dev, "failed to get adrstn\n"); + return PTR_ERR(adc->adrstn); + } + + adc->presetn = devm_reset_control_get_exclusive(dev, "presetn"); + if (IS_ERR(adc->presetn)) { + dev_err(dev, "failed to get presetn\n"); + return PTR_ERR(adc->presetn); + } + + ret = reset_control_deassert(adc->adrstn); + if (ret) { + dev_err(&pdev->dev, "failed to deassert adrstn pin, %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, + rzg2l_adc_reset_assert, adc->adrstn); + if (ret) { + dev_err(&pdev->dev, "failed to register adrstn assert devm action, %d\n", + ret); + return ret; + } + + ret = reset_control_deassert(adc->presetn); + if (ret) { + dev_err(&pdev->dev, "failed to deassert presetn pin, %d\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, + rzg2l_adc_reset_assert, adc->presetn); + if (ret) { + dev_err(&pdev->dev, "failed to register presetn assert devm action, %d\n", + ret); + return ret; + } + + ret = rzg2l_adc_hw_init(adc); + if (ret) { + dev_err(&pdev->dev, "failed to initialize ADC HW, %d\n", ret); + return ret; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no irq resource\n"); + return irq; + } + + ret = devm_request_irq(dev, irq, rzg2l_adc_isr, + 0, dev_name(dev), adc); + if (ret < 0) + return ret; + + init_completion(&adc->completion); + + platform_set_drvdata(pdev, indio_dev); + + indio_dev->name = DRIVER_NAME; + indio_dev->info = &rzg2l_adc_iio_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = adc->data->channels; + indio_dev->num_channels = adc->data->num_channels; + + pm_runtime_set_suspended(dev); + ret = devm_add_action_or_reset(&pdev->dev, + rzg2l_adc_pm_runtime_set_suspended, &indio_dev->dev); + if (ret) + return ret; + + pm_runtime_enable(dev); + ret = devm_add_action_or_reset(&pdev->dev, + rzg2l_adc_pm_runtime_disable, &indio_dev->dev); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct of_device_id rzg2l_adc_match[] = { + { .compatible = "renesas,rzg2l-adc",}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rzg2l_adc_match); + +static int __maybe_unused rzg2l_adc_pm_runtime_suspend(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct rzg2l_adc *adc = iio_priv(indio_dev); + + rzg2l_adc_pwr(adc, false); + clk_disable_unprepare(adc->adclk); + clk_disable_unprepare(adc->pclk); + + return 0; +} + +static int __maybe_unused rzg2l_adc_pm_runtime_resume(struct device *dev) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct rzg2l_adc *adc = iio_priv(indio_dev); + int ret; + + ret = clk_prepare_enable(adc->pclk); + if (ret) + return ret; + + ret = clk_prepare_enable(adc->adclk); + if (ret) + return ret; + + rzg2l_adc_pwr(adc, true); + + return 0; +} + +static const struct dev_pm_ops rzg2l_adc_pm_ops = { + SET_RUNTIME_PM_OPS(rzg2l_adc_pm_runtime_suspend, + rzg2l_adc_pm_runtime_resume, + NULL) +}; + +static struct platform_driver rzg2l_adc_driver = { + .probe = rzg2l_adc_probe, + .driver = { + .name = DRIVER_NAME, + .of_match_table = rzg2l_adc_match, + .pm = &rzg2l_adc_pm_ops, + }, +}; + +module_platform_driver(rzg2l_adc_driver); + +MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>"); +MODULE_DESCRIPTION("Renesas RZ/G2L ADC driver"); +MODULE_LICENSE("GPL v2"); -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node 2021-08-04 20:21 [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 2/3] iio: adc: Add driver " Lad Prabhakar @ 2021-08-04 20:21 ` Lad Prabhakar 2021-08-10 9:42 ` Geert Uytterhoeven 2021-08-08 17:01 ` [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Jonathan Cameron 3 siblings, 1 reply; 8+ messages in thread From: Lad Prabhakar @ 2021-08-04 20:21 UTC (permalink / raw) To: Jonathan Cameron, Geert Uytterhoeven, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, devicetree, linux-renesas-soc Cc: linux-kernel, Prabhakar, Biju Das, Lad Prabhakar Add ADC node to R9A07G044 (RZ/G2L) SoC DTSI. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> --- v3-->v4: unchanged This patch applies on top of https://git.kernel.org/pub/scm/linux/kernel/ git/geert/renesas-devel.git/log/?h=renesas-arm-dt-for-v5.15 --- arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi index 9a7489dc70d1..28aafa34d583 100644 --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi @@ -169,6 +169,48 @@ status = "disabled"; }; + adc: adc@10059000 { + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; + reg = <0 0x10059000 0 0x400>; + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; + clocks = <&cpg CPG_MOD R9A07G044_ADC_ADCLK>, + <&cpg CPG_MOD R9A07G044_ADC_PCLK>; + clock-names = "adclk", "pclk"; + resets = <&cpg R9A07G044_ADC_PRESETN>, + <&cpg R9A07G044_ADC_ADRST_N>; + reset-names = "presetn", "adrst-n"; + power-domains = <&cpg>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + channel@1 { + reg = <1>; + }; + channel@2 { + reg = <2>; + }; + channel@3 { + reg = <3>; + }; + channel@4 { + reg = <4>; + }; + channel@5 { + reg = <5>; + }; + channel@6 { + reg = <6>; + }; + channel@7 { + reg = <7>; + }; + }; + cpg: clock-controller@11010000 { compatible = "renesas,r9a07g044-cpg"; reg = <0 0x11010000 0 0x10000>; -- 2.17.1 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node 2021-08-04 20:21 ` [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node Lad Prabhakar @ 2021-08-10 9:42 ` Geert Uytterhoeven 0 siblings, 0 replies; 8+ messages in thread From: Geert Uytterhoeven @ 2021-08-10 9:42 UTC (permalink / raw) To: Lad Prabhakar Cc: Jonathan Cameron, Geert Uytterhoeven, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux-Renesas, Linux Kernel Mailing List, Prabhakar, Biju Das Hi Prabhakar, On Wed, Aug 4, 2021 at 10:25 PM Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Add ADC node to R9A07G044 (RZ/G2L) SoC DTSI. > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> > Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Thanks for your patch! > --- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > +++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi > @@ -169,6 +169,48 @@ > status = "disabled"; > }; > > + adc: adc@10059000 { > + compatible = "renesas,r9a07g044-adc", "renesas,rzg2l-adc"; > + reg = <0 0x10059000 0 0x400>; > + interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>; Double space after 347. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> i.e. will queue in renesas-devel for v5.15 with the above fixed. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support 2021-08-04 20:21 [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar ` (2 preceding siblings ...) 2021-08-04 20:21 ` [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node Lad Prabhakar @ 2021-08-08 17:01 ` Jonathan Cameron 2021-08-09 13:04 ` Lad, Prabhakar 3 siblings, 1 reply; 8+ messages in thread From: Jonathan Cameron @ 2021-08-08 17:01 UTC (permalink / raw) To: Lad Prabhakar Cc: Geert Uytterhoeven, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, devicetree, linux-renesas-soc, linux-kernel, Prabhakar, Biju Das On Wed, 4 Aug 2021 21:21:15 +0100 Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > Hi All, > > This patch series adds ADC support for Renesas RZ/G2L family. > > Patches apply on top of v5.14-rc2. Hi Lad, I'm fine with this, but need to pull my tree forwards to include the header that is only in rc2. I'll probably do that later in the week then pick up patches 1 and 2. Thanks, Jonathan > > Cheers, > Prabhakar > > Changes for v4: > * Fixed registering action to assert resets on failure/remove > as reported by Philip. > * Fixed review comments suggested by Jonathan. > * Included RB tag from Rob for patch 1/3 > * Note DTS patch applies on top of https://git.kernel.org/pub/scm/ > linux/kernel/git/geert/renesas-devel.git/log/ > ?h=renesas-arm-dt-for-v5.15 > > Changes for v3 (as requested by Jonathan): > * Made use of FIELD_PREP() > * Renamed _CLEAR to _MASK and inverted inline as required > * Moved |= pair's on same lines > * Made use of sysfs_emit() while reading the labels > * Used for_each_bit_set() in rzg2l_adc_isr() > * Renamed rzg2l_adc_parse_of() -> rzg2l_adc_parse_properties() > * Used devm_add_action_or_reset() for asserting the reset signals and > disabling pm_runtime and eventually removing remove() callback > * Added comments in isr handler for channel select interrupt > * Moved enabling/disabling of pclk during hw init in rzg2l_adc_hw_init() > * Dropped clock patch 3/4 (https://lore.kernel.org/patchwork/patch/1462152/) > from previous series as its queued up in renesas-clk-for-v5.15 > > Changes for v2: > * Update binding doc, dropped gpios/renesas-rzg2l,adc-trigger-mode > properties included channel property to represent each wired channel. > * Fixed review comments pointed by Alexandru, implemented pm runtime > support, dropped mlock usage > * Fixed review comments pointed by Jonathan, renamed the macros, > simplified the code. > * Included clock and DT patches > > v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/ > 20210629220328.13366-1-prabhakar.mahadev-lad.rj@bp.renesas.com/ > > Lad Prabhakar (3): > dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L > A/D converter > iio: adc: Add driver for Renesas RZ/G2L A/D converter > arm64: dts: renesas: r9a07g044: Add ADC node > > .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++ > MAINTAINERS | 8 + > arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++ > drivers/iio/adc/Kconfig | 10 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++ > 6 files changed, 795 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml > create mode 100644 drivers/iio/adc/rzg2l_adc.c > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support 2021-08-08 17:01 ` [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Jonathan Cameron @ 2021-08-09 13:04 ` Lad, Prabhakar 2021-08-15 16:04 ` Jonathan Cameron 0 siblings, 1 reply; 8+ messages in thread From: Lad, Prabhakar @ 2021-08-09 13:04 UTC (permalink / raw) To: Jonathan Cameron, Geert Uytterhoeven Cc: Lad Prabhakar, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux-Renesas, LKML, Biju Das Hi Jonathan, On Sun, Aug 8, 2021 at 5:58 PM Jonathan Cameron <jic23@kernel.org> wrote: > > On Wed, 4 Aug 2021 21:21:15 +0100 > Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > > Hi All, > > > > This patch series adds ADC support for Renesas RZ/G2L family. > > > > Patches apply on top of v5.14-rc2. > Hi Lad, I'm fine with this, but need to pull my tree forwards > to include the header that is only in rc2. > > I'll probably do that later in the week then pick up patches 1 and 2. > Thanks. Geert could you please pick patch 3/3. Cheers, Prabhakar > Thanks, > > Jonathan > > > > Cheers, > > Prabhakar > > > > Changes for v4: > > * Fixed registering action to assert resets on failure/remove > > as reported by Philip. > > * Fixed review comments suggested by Jonathan. > > * Included RB tag from Rob for patch 1/3 > > * Note DTS patch applies on top of https://git.kernel.org/pub/scm/ > > linux/kernel/git/geert/renesas-devel.git/log/ > > ?h=renesas-arm-dt-for-v5.15 > > > > Changes for v3 (as requested by Jonathan): > > * Made use of FIELD_PREP() > > * Renamed _CLEAR to _MASK and inverted inline as required > > * Moved |= pair's on same lines > > * Made use of sysfs_emit() while reading the labels > > * Used for_each_bit_set() in rzg2l_adc_isr() > > * Renamed rzg2l_adc_parse_of() -> rzg2l_adc_parse_properties() > > * Used devm_add_action_or_reset() for asserting the reset signals and > > disabling pm_runtime and eventually removing remove() callback > > * Added comments in isr handler for channel select interrupt > > * Moved enabling/disabling of pclk during hw init in rzg2l_adc_hw_init() > > * Dropped clock patch 3/4 (https://lore.kernel.org/patchwork/patch/1462152/) > > from previous series as its queued up in renesas-clk-for-v5.15 > > > > Changes for v2: > > * Update binding doc, dropped gpios/renesas-rzg2l,adc-trigger-mode > > properties included channel property to represent each wired channel. > > * Fixed review comments pointed by Alexandru, implemented pm runtime > > support, dropped mlock usage > > * Fixed review comments pointed by Jonathan, renamed the macros, > > simplified the code. > > * Included clock and DT patches > > > > v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/ > > 20210629220328.13366-1-prabhakar.mahadev-lad.rj@bp.renesas.com/ > > > > Lad Prabhakar (3): > > dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L > > A/D converter > > iio: adc: Add driver for Renesas RZ/G2L A/D converter > > arm64: dts: renesas: r9a07g044: Add ADC node > > > > .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++ > > MAINTAINERS | 8 + > > arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++ > > drivers/iio/adc/Kconfig | 10 + > > drivers/iio/adc/Makefile | 1 + > > drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++ > > 6 files changed, 795 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml > > create mode 100644 drivers/iio/adc/rzg2l_adc.c > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 0/3] Renesas RZ/G2L ADC driver support 2021-08-09 13:04 ` Lad, Prabhakar @ 2021-08-15 16:04 ` Jonathan Cameron 0 siblings, 0 replies; 8+ messages in thread From: Jonathan Cameron @ 2021-08-15 16:04 UTC (permalink / raw) To: Lad, Prabhakar Cc: Geert Uytterhoeven, Lad Prabhakar, Rob Herring, Lars-Peter Clausen, Magnus Damm, Philipp Zabel, Alexandru Ardelean, linux-iio, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Linux-Renesas, LKML, Biju Das On Mon, 9 Aug 2021 14:04:33 +0100 "Lad, Prabhakar" <prabhakar.csengg@gmail.com> wrote: > Hi Jonathan, > > On Sun, Aug 8, 2021 at 5:58 PM Jonathan Cameron <jic23@kernel.org> wrote: > > > > On Wed, 4 Aug 2021 21:21:15 +0100 > > Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> wrote: > > > > > Hi All, > > > > > > This patch series adds ADC support for Renesas RZ/G2L family. > > > > > > Patches apply on top of v5.14-rc2. > > Hi Lad, I'm fine with this, but need to pull my tree forwards > > to include the header that is only in rc2. > > > > I'll probably do that later in the week then pick up patches 1 and 2. > > > Thanks. > > Geert could you please pick patch 3/3. 1 and 2 now applied to the togreg branch of iio.git and pushed out as testing to see if 0-day can break them. Thanks, Jonathan > > Cheers, > Prabhakar > > > Thanks, > > > > Jonathan > > > > > > Cheers, > > > Prabhakar > > > > > > Changes for v4: > > > * Fixed registering action to assert resets on failure/remove > > > as reported by Philip. > > > * Fixed review comments suggested by Jonathan. > > > * Included RB tag from Rob for patch 1/3 > > > * Note DTS patch applies on top of https://git.kernel.org/pub/scm/ > > > linux/kernel/git/geert/renesas-devel.git/log/ > > > ?h=renesas-arm-dt-for-v5.15 > > > > > > Changes for v3 (as requested by Jonathan): > > > * Made use of FIELD_PREP() > > > * Renamed _CLEAR to _MASK and inverted inline as required > > > * Moved |= pair's on same lines > > > * Made use of sysfs_emit() while reading the labels > > > * Used for_each_bit_set() in rzg2l_adc_isr() > > > * Renamed rzg2l_adc_parse_of() -> rzg2l_adc_parse_properties() > > > * Used devm_add_action_or_reset() for asserting the reset signals and > > > disabling pm_runtime and eventually removing remove() callback > > > * Added comments in isr handler for channel select interrupt > > > * Moved enabling/disabling of pclk during hw init in rzg2l_adc_hw_init() > > > * Dropped clock patch 3/4 (https://lore.kernel.org/patchwork/patch/1462152/) > > > from previous series as its queued up in renesas-clk-for-v5.15 > > > > > > Changes for v2: > > > * Update binding doc, dropped gpios/renesas-rzg2l,adc-trigger-mode > > > properties included channel property to represent each wired channel. > > > * Fixed review comments pointed by Alexandru, implemented pm runtime > > > support, dropped mlock usage > > > * Fixed review comments pointed by Jonathan, renamed the macros, > > > simplified the code. > > > * Included clock and DT patches > > > > > > v1: https://patchwork.kernel.org/project/linux-renesas-soc/cover/ > > > 20210629220328.13366-1-prabhakar.mahadev-lad.rj@bp.renesas.com/ > > > > > > Lad Prabhakar (3): > > > dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L > > > A/D converter > > > iio: adc: Add driver for Renesas RZ/G2L A/D converter > > > arm64: dts: renesas: r9a07g044: Add ADC node > > > > > > .../bindings/iio/adc/renesas,rzg2l-adc.yaml | 134 ++++ > > > MAINTAINERS | 8 + > > > arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 42 ++ > > > drivers/iio/adc/Kconfig | 10 + > > > drivers/iio/adc/Makefile | 1 + > > > drivers/iio/adc/rzg2l_adc.c | 600 ++++++++++++++++++ > > > 6 files changed, 795 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml > > > create mode 100644 drivers/iio/adc/rzg2l_adc.c > > > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-08-15 16:01 UTC | newest] Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-08-04 20:21 [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 1/3] dt-bindings: iio: adc: Add binding documentation for Renesas RZ/G2L A/D converter Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 2/3] iio: adc: Add driver " Lad Prabhakar 2021-08-04 20:21 ` [PATCH v4 3/3] arm64: dts: renesas: r9a07g044: Add ADC node Lad Prabhakar 2021-08-10 9:42 ` Geert Uytterhoeven 2021-08-08 17:01 ` [PATCH v4 0/3] Renesas RZ/G2L ADC driver support Jonathan Cameron 2021-08-09 13:04 ` Lad, Prabhakar 2021-08-15 16:04 ` Jonathan Cameron
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).