[PATCH AUTOSEL 4.4 01/35] crypto: mxs-dcp - Use sg_mapping_iter to copy data

[PATCH AUTOSEL 4.4 01/35] crypto: mxs-dcp - Use sg_mapping_iter to copy data

[Sasha Levin]

From: Sean Anderson <sean.anderson@seco.com>

[ Upstream commit 2e6d793e1bf07fe5e20cfbbdcec9e1af7e5097eb ]

This uses the sg_pcopy_from_buffer to copy data, instead of doing it
ourselves.

In addition to reducing code size, this fixes the following oops
resulting from failing to kmap the page:

[   68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8
[   68.904539] pgd = 3561adb3
[   68.907475] [00000ab8] *pgd=00000000
[   68.911153] Internal error: Oops: 805 [#1] ARM
[   68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4
[   68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296
[   68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   68.964710] PC is at memcpy+0xa8/0x330
[   68.968479] LR is at 0xd7b2bc9d
[   68.971638] pc : [<c053e7c8>]    lr : [<d7b2bc9d>]    psr: 000f0013
[   68.977920] sp : c2cbbee4  ip : 00000010  fp : 00000010
[   68.983159] r10: 00000000  r9 : c3283a40  r8 : 1a5a6f08
[   68.988402] r7 : 4bfe0ecc  r6 : 76d8a220  r5 : c32f9050  r4 : 00000001
[   68.994945] r3 : 00000ab8  r2 : fffffff0  r1 : c32f9050  r0 : 00000ab8
[   69.001492] Flags: nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   69.008646] Control: 10c53c7d  Table: 83664059  DAC: 00000051
[   69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab)
[   69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000)
[   69.025519] bee0:          c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c
[   69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc
[   69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000
[   69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040
[   69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54
[   69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000
[   69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000
[   69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[   69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp])
[   69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160)
[   69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
[   69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8)
[   69.129250] bfa0:                                     00000000 00000000 00000000 00000000
[   69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[   69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004)

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/crypto/mxs-dcp.c | 36 +++++++++---------------------------
 1 file changed, 9 insertions(+), 27 deletions(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c
index 1a8dc76e117e..f42d8c852314 100644
--- a/drivers/crypto/mxs-dcp.c
+++ b/drivers/crypto/mxs-dcp.c
@@ -280,21 +280,20 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 
 	struct scatterlist *dst = req->dst;
 	struct scatterlist *src = req->src;
-	const int nents = sg_nents(req->src);
+	int dst_nents = sg_nents(dst);
 
 	const int out_off = DCP_BUF_SZ;
 	uint8_t *in_buf = sdcp->coh->aes_in_buf;
 	uint8_t *out_buf = sdcp->coh->aes_out_buf;
 
-	uint8_t *out_tmp, *src_buf, *dst_buf = NULL;
 	uint32_t dst_off = 0;
+	uint8_t *src_buf = NULL;
 	uint32_t last_out_len = 0;
 
 	uint8_t *key = sdcp->coh->aes_key;
 
 	int ret = 0;
-	int split = 0;
-	unsigned int i, len, clen, rem = 0, tlen = 0;
+	unsigned int i, len, clen, tlen = 0;
 	int init = 0;
 	bool limit_hit = false;
 
@@ -312,7 +311,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 		memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128);
 	}
 
-	for_each_sg(req->src, src, nents, i) {
+	for_each_sg(req->src, src, sg_nents(src), i) {
 		src_buf = sg_virt(src);
 		len = sg_dma_len(src);
 		tlen += len;
@@ -337,34 +336,17 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq)
 			 * submit the buffer.
 			 */
 			if (actx->fill == out_off || sg_is_last(src) ||
-				limit_hit) {
+			    limit_hit) {
 				ret = mxs_dcp_run_aes(actx, req, init);
 				if (ret)
 					return ret;
 				init = 0;
 
-				out_tmp = out_buf;
+				sg_pcopy_from_buffer(dst, dst_nents, out_buf,
+						     actx->fill, dst_off);
+				dst_off += actx->fill;
 				last_out_len = actx->fill;
-				while (dst && actx->fill) {
-					if (!split) {
-						dst_buf = sg_virt(dst);
-						dst_off = 0;
-					}
-					rem = min(sg_dma_len(dst) - dst_off,
-						  actx->fill);
-
-					memcpy(dst_buf + dst_off, out_tmp, rem);
-					out_tmp += rem;
-					dst_off += rem;
-					actx->fill -= rem;
-
-					if (dst_off == sg_dma_len(dst)) {
-						dst = sg_next(dst);
-						split = 0;
-					} else {
-						split = 1;
-					}
-				}
+				actx->fill = 0;
 			}
 		} while (len);
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 02/35] PCI: Use pci_update_current_state() in pci_enable_device_flags()

[Sasha Levin]

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

[ Upstream commit 14858dcc3b3587f4bb5c48e130ee7d68fc2b0a29 ]

Updating the current_state field of struct pci_dev the way it is done
in pci_enable_device_flags() before calling do_pci_enable_device() may
not work.  For example, if the given PCI device depends on an ACPI
power resource whose _STA method initially returns 0 ("off"), but the
config space of the PCI device is accessible and the power state
retrieved from the PCI_PM_CTRL register is D0, the current_state
field in the struct pci_dev representing that device will get out of
sync with the power.state of its ACPI companion object and that will
lead to power management issues going forward.

To avoid such issues, make pci_enable_device_flags() call
pci_update_current_state() which takes ACPI device power management
into account, if present, to retrieve the current power state of the
device.

Link: https://lore.kernel.org/lkml/20210314000439.3138941-1-luzmaximilian@gmail.com/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index b7f65fc54dc2..642694e31cb6 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1334,11 +1334,7 @@ static int pci_enable_device_flags(struct pci_dev *dev, unsigned long flags)
 	 * so that things like MSI message writing will behave as expected
 	 * (e.g. if the device really is in D0 at enable time).
 	 */
-	if (dev->pm_cap) {
-		u16 pmcsr;
-		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
-	}
+	pci_update_current_state(dev, dev->current_state);
 
 	if (atomic_inc_return(&dev->enable_cnt) > 1)
 		return 0;		/* already enabled */
-- 
2.30.2

[PATCH AUTOSEL 4.4 03/35] iio: dac: ad5624r: Fix incorrect handling of an optional regulator.

[Sasha Levin]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 97683c851f9cdbd3ea55697cbe2dcb6af4287bbd ]

The naming of the regulator is problematic.  VCC is usually a supply
voltage whereas these devices have a separate VREF pin.

Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.

In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dac/ad5624r_spi.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/dac/ad5624r_spi.c b/drivers/iio/dac/ad5624r_spi.c
index 5489ec43b95d..e5cefdb674f8 100644
--- a/drivers/iio/dac/ad5624r_spi.c
+++ b/drivers/iio/dac/ad5624r_spi.c
@@ -231,7 +231,7 @@ static int ad5624r_probe(struct spi_device *spi)
 	if (!indio_dev)
 		return -ENOMEM;
 	st = iio_priv(indio_dev);
-	st->reg = devm_regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get_optional(&spi->dev, "vref");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)
@@ -242,6 +242,22 @@ static int ad5624r_probe(struct spi_device *spi)
 			goto error_disable_reg;
 
 		voltage_uv = ret;
+	} else {
+		if (PTR_ERR(st->reg) != -ENODEV)
+			return PTR_ERR(st->reg);
+		/* Backwards compatibility. This naming is not correct */
+		st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
+		if (!IS_ERR(st->reg)) {
+			ret = regulator_enable(st->reg);
+			if (ret)
+				return ret;
+
+			ret = regulator_get_voltage(st->reg);
+			if (ret < 0)
+				goto error_disable_reg;
+
+			voltage_uv = ret;
+		}
 	}
 
 	spi_set_drvdata(spi, indio_dev);
-- 
2.30.2

[PATCH AUTOSEL 4.4 04/35] video: fbdev: kyro: fix a DoS bug by restricting user input

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 98a65439172dc69cb16834e62e852afc2adb83ed ]

The user can pass in any value to the driver through the 'ioctl'
interface. The driver dost not check, which may cause DoS bugs.

The following log reveals it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476
Call Trace:
 kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline]
 kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603
 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171
 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739
 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1626235762-2590-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/kyro/fbdev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index 5bb01533271e..8482444259ce 100644
--- a/drivers/video/fbdev/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
@@ -372,6 +372,11 @@ static int kyro_dev_overlay_viewport_set(u32 x, u32 y, u32 ulWidth, u32 ulHeight
 		/* probably haven't called CreateOverlay yet */
 		return -EINVAL;
 
+	if (ulWidth == 0 || ulWidth == 0xffffffff ||
+	    ulHeight == 0 || ulHeight == 0xffffffff ||
+	    (x < 2 && ulWidth + 2 == 0))
+		return -EINVAL;
+
 	/* Stop Ramdac Output */
 	DisableRamdacOutput(deviceInfo.pSTGReg);
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 05/35] netlink: Deal with ESRCH error in nlmsg_notify()

[Sasha Levin]

From: Yajun Deng <yajun.deng@linux.dev>

[ Upstream commit fef773fc8110d8124c73a5e6610f89e52814637d ]

Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae75b ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlink/af_netlink.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index c20c41801845..260cba93a2cf 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -2405,13 +2405,15 @@ int nlmsg_notify(struct sock *sk, struct sk_buff *skb, u32 portid,
 		/* errors reported via destination sk->sk_err, but propagate
 		 * delivery errors if NETLINK_BROADCAST_ERROR flag is set */
 		err = nlmsg_multicast(sk, skb, exclude_portid, group, flags);
+		if (err == -ESRCH)
+			err = 0;
 	}
 
 	if (report) {
 		int err2;
 
 		err2 = nlmsg_unicast(sk, skb, portid);
-		if (!err || err == -ESRCH)
+		if (!err)
 			err = err2;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 06/35] Smack: Fix wrong semantics in smk_access_entry()

[Sasha Levin]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

[ Upstream commit 6d14f5c7028eea70760df284057fe198ce7778dd ]

In the smk_access_entry() function, if no matching rule is found
in the rust_list, a negative error code will be used to perform bit
operations with the MAY_ enumeration value. This is semantically
wrong. This patch fixes this issue.

Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/smack/smack_access.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/security/smack/smack_access.c b/security/smack/smack_access.c
index 0df316c62005..84f38b694242 100644
--- a/security/smack/smack_access.c
+++ b/security/smack/smack_access.c
@@ -90,23 +90,22 @@ int log_policy = SMACK_AUDIT_DENIED;
 int smk_access_entry(char *subject_label, char *object_label,
 			struct list_head *rule_list)
 {
-	int may = -ENOENT;
 	struct smack_rule *srp;
 
 	list_for_each_entry_rcu(srp, rule_list, list) {
 		if (srp->smk_object->smk_known == object_label &&
 		    srp->smk_subject->smk_known == subject_label) {
-			may = srp->smk_access;
-			break;
+			int may = srp->smk_access;
+			/*
+			 * MAY_WRITE implies MAY_LOCK.
+			 */
+			if ((may & MAY_WRITE) == MAY_WRITE)
+				may |= MAY_LOCK;
+			return may;
 		}
 	}
 
-	/*
-	 * MAY_WRITE implies MAY_LOCK.
-	 */
-	if ((may & MAY_WRITE) == MAY_WRITE)
-		may |= MAY_LOCK;
-	return may;
+	return -ENOENT;
 }
 
 /**
-- 
2.30.2

[PATCH AUTOSEL 4.4 07/35] usb: host: fotg210: fix the actual_length of an iso packet

[Sasha Levin]

From: Kelly Devilliv <kelly.devilliv@gmail.com>

[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]

We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/fotg210-hcd.c | 5 ++---
 drivers/usb/host/fotg210.h     | 5 -----
 2 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 5dacc3076efd..e081392ec830 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -4495,13 +4495,12 @@ static bool itd_complete(struct fotg210_hcd *fotg210, struct fotg210_itd *itd)
 
 			/* HC need not update length with this error */
 			if (!(t & FOTG210_ISOC_BABBLE)) {
-				desc->actual_length =
-					fotg210_itdlen(urb, desc, t);
+				desc->actual_length = FOTG210_ITD_LENGTH(t);
 				urb->actual_length += desc->actual_length;
 			}
 		} else if (likely((t & FOTG210_ISOC_ACTIVE) == 0)) {
 			desc->status = 0;
-			desc->actual_length = fotg210_itdlen(urb, desc, t);
+			desc->actual_length = FOTG210_ITD_LENGTH(t);
 			urb->actual_length += desc->actual_length;
 		} else {
 			/* URB was too late */
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
index b5cfa7aeb277..1a3f94123c88 100644
--- a/drivers/usb/host/fotg210.h
+++ b/drivers/usb/host/fotg210.h
@@ -682,11 +682,6 @@ static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
 	return fotg210_readl(fotg210, &fotg210->regs->frame_index);
 }
 
-#define fotg210_itdlen(urb, desc, t) ({			\
-	usb_pipein((urb)->pipe) ?				\
-	(desc)->length - FOTG210_ITD_LENGTH(t) :			\
-	FOTG210_ITD_LENGTH(t);					\
-})
 /*-------------------------------------------------------------------------*/
 
 #endif /* __LINUX_FOTG210_H */
-- 
2.30.2

[PATCH AUTOSEL 4.4 08/35] usb: gadget: u_ether: fix a potential null pointer dereference

[Sasha Levin]

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]

f_ncm tx timeout can call us with null skb to flush
a pending frame.  In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.

In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.

Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
 of view of the host, so here IN actually means outbound...)

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_ether.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 46c50135ef9f..4bc95ac3d448 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -507,8 +507,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	}
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	if (skb && !in) {
-		dev_kfree_skb_any(skb);
+	if (!in) {
+		if (skb)
+			dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 09/35] tty: serial: jsm: hold port lock when reporting modem line changes

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 240e126c28df084222f0b661321e8e3ecb0d232e ]

uart_handle_dcd_change() requires a port lock to be held and will emit a
warning when lockdep is enabled.

Held corresponding lock to fix the following warnings.

[  132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120
[  132.530482] Modules linked in:
[  132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31
[  132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120
[  132.557100] Call Trace:
[  132.557562]  ? __free_pages+0x83/0xb0
[  132.558213]  neo_parse_modem+0x156/0x220
[  132.558897]  neo_param+0x399/0x840
[  132.559495]  jsm_tty_open+0x12f/0x2d0
[  132.560131]  uart_startup.part.18+0x153/0x340
[  132.560888]  ? lock_is_held_type+0xe9/0x140
[  132.561660]  uart_port_activate+0x7f/0xe0
[  132.562351]  ? uart_startup.part.18+0x340/0x340
[  132.563003]  tty_port_open+0x8d/0xf0
[  132.563523]  ? uart_set_options+0x1e0/0x1e0
[  132.564125]  uart_open+0x24/0x40
[  132.564604]  tty_open+0x15c/0x630

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/1626242003-3809-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/jsm/jsm_neo.c | 2 ++
 drivers/tty/serial/jsm/jsm_tty.c | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 932b2accd06f..4ed0c099c757 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -827,7 +827,9 @@ static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
 		/* Parse any modem signal changes */
 		jsm_dbg(INTR, &ch->ch_bd->pci_dev,
 			"MOD_STAT: sending to parse_modem_sigs\n");
+		spin_lock_irqsave(&ch->uart_port.lock, lock_flags);
 		neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+		spin_unlock_irqrestore(&ch->uart_port.lock, lock_flags);
 	}
 }
 
diff --git a/drivers/tty/serial/jsm/jsm_tty.c b/drivers/tty/serial/jsm/jsm_tty.c
index 524e86ab3cae..dad3abab8280 100644
--- a/drivers/tty/serial/jsm/jsm_tty.c
+++ b/drivers/tty/serial/jsm/jsm_tty.c
@@ -195,6 +195,7 @@ static void jsm_tty_break(struct uart_port *port, int break_state)
 
 static int jsm_tty_open(struct uart_port *port)
 {
+	unsigned long lock_flags;
 	struct jsm_board *brd;
 	struct jsm_channel *channel =
 		container_of(port, struct jsm_channel, uart_port);
@@ -248,6 +249,7 @@ static int jsm_tty_open(struct uart_port *port)
 	channel->ch_cached_lsr = 0;
 	channel->ch_stops_sent = 0;
 
+	spin_lock_irqsave(&port->lock, lock_flags);
 	termios = &port->state->port.tty->termios;
 	channel->ch_c_cflag	= termios->c_cflag;
 	channel->ch_c_iflag	= termios->c_iflag;
@@ -267,6 +269,7 @@ static int jsm_tty_open(struct uart_port *port)
 	jsm_carrier(channel);
 
 	channel->ch_open_count++;
+	spin_unlock_irqrestore(&port->lock, lock_flags);
 
 	jsm_dbg(OPEN, &channel->ch_bd->pci_dev, "finish\n");
 	return 0;
-- 
2.30.2

[PATCH AUTOSEL 4.4 10/35] bpf/tests: Fix copy-and-paste error in double word test

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit ae7f47041d928b1a2f28717d095b4153c63cbf6a ]

This test now operates on DW as stated instead of W, which was
already covered by another test.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721104058.3755254-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index b1495f586f29..7db8d06006d8 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -3983,8 +3983,8 @@ static struct bpf_test tests[] = {
 		.u.insns_int = {
 			BPF_LD_IMM64(R0, 0),
 			BPF_LD_IMM64(R1, 0xffffffffffffffffLL),
-			BPF_STX_MEM(BPF_W, R10, R1, -40),
-			BPF_LDX_MEM(BPF_W, R0, R10, -40),
+			BPF_STX_MEM(BPF_DW, R10, R1, -40),
+			BPF_LDX_MEM(BPF_DW, R0, R10, -40),
 			BPF_EXIT_INSN(),
 		},
 		INTERNAL,
-- 
2.30.2

[PATCH AUTOSEL 4.4 11/35] bpf/tests: Do not PASS tests without actually testing the result

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 2b7e9f25e590726cca76700ebdb10e92a7a72ca1 ]

Each test case can have a set of sub-tests, where each sub-test can
run the cBPF/eBPF test snippet with its own data_size and expected
result. Before, the end of the sub-test array was indicated by both
data_size and result being zero. However, most or all of the internal
eBPF tests has a data_size of zero already. When such a test also had
an expected value of zero, the test was never run but reported as
PASS anyway.

Now the test runner always runs the first sub-test, regardless of the
data_size and result values. The sub-test array zero-termination only
applies for any additional sub-tests.

There are other ways fix it of course, but this solution at least
removes the surprise of eBPF tests with a zero result always succeeding.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210721103822.3755111-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/test_bpf.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 7db8d06006d8..cf2880d2ce3f 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -5399,7 +5399,14 @@ static int run_one(const struct bpf_prog *fp, struct bpf_test *test)
 		u64 duration;
 		u32 ret;
 
-		if (test->test[i].data_size == 0 &&
+		/*
+		 * NOTE: Several sub-tests may be present, in which case
+		 * a zero {data_size, result} tuple indicates the end of
+		 * the sub-test array. The first test is always run,
+		 * even if both data_size and result happen to be zero.
+		 */
+		if (i > 0 &&
+		    test->test[i].data_size == 0 &&
 		    test->test[i].result == 0)
 			break;
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 12/35] video: fbdev: asiliantfb: Error out if 'pixclock' equals zero

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit b36b242d4b8ea178f7fd038965e3cac7f30c3f09 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   43.861711] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   43.861737] CPU: 2 PID: 11764 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #224
[   43.861756] RIP: 0010:asiliantfb_check_var+0x4e/0x730
[   43.861843] Call Trace:
[   43.861848]  ? asiliantfb_remove+0x190/0x190
[   43.861858]  fb_set_var+0x2e4/0xeb0
[   43.861866]  ? fb_blank+0x1a0/0x1a0
[   43.861873]  ? lock_acquire+0x1ef/0x530
[   43.861884]  ? lock_release+0x810/0x810
[   43.861892]  ? lock_is_held_type+0x100/0x140
[   43.861903]  ? ___might_sleep+0x1ee/0x2d0
[   43.861914]  ? __mutex_lock+0x620/0x1190
[   43.861921]  ? do_fb_ioctl+0x313/0x700
[   43.861929]  ? mutex_lock_io_nested+0xfa0/0xfa0
[   43.861936]  ? __this_cpu_preempt_check+0x1d/0x30
[   43.861944]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861952]  ? lockdep_hardirqs_on+0x59/0x100
[   43.861959]  ? _raw_spin_unlock_irqrestore+0x46/0x60
[   43.861967]  ? trace_hardirqs_on+0x6a/0x1c0
[   43.861978]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-2-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/asiliantfb.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index 7e8ddf00ccc2..dbcc6ebaf904 100644
--- a/drivers/video/fbdev/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
@@ -227,6 +227,9 @@ static int asiliantfb_check_var(struct fb_var_screeninfo *var,
 {
 	unsigned long Ftarget, ratio, remainder;
 
+	if (!var->pixclock)
+		return -EINVAL;
+
 	ratio = 1000000 / var->pixclock;
 	remainder = 1000000 % var->pixclock;
 	Ftarget = 1000000 * ratio + (1000000 * remainder) / var->pixclock;
-- 
2.30.2

[PATCH AUTOSEL 4.4 13/35] video: fbdev: kyro: Error out if 'pixclock' equals zero

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 1520b4b7ba964f8eec2e7dd14c571d50de3e5191 ]

The userspace program could pass any values to the driver through
ioctl() interface. if the driver doesn't check the value of 'pixclock',
it may cause divide error because the value of 'lineclock' and
'frameclock' will be zero.

Fix this by checking whether 'pixclock' is zero in kyrofb_check_var().

The following log reveals it:

[  103.073930] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[  103.073942] CPU: 4 PID: 12483 Comm: syz-executor Not tainted 5.14.0-rc2-00478-g2734d6c1b1a0-dirty #118
[  103.073959] RIP: 0010:kyrofb_set_par+0x316/0xc80
[  103.074045] Call Trace:
[  103.074048]  ? ___might_sleep+0x1ee/0x2d0
[  103.074060]  ? kyrofb_ioctl+0x330/0x330
[  103.074069]  fb_set_var+0x5bf/0xeb0
[  103.074078]  ? fb_blank+0x1a0/0x1a0
[  103.074085]  ? lock_acquire+0x3bd/0x530
[  103.074094]  ? lock_release+0x810/0x810
[  103.074103]  ? ___might_sleep+0x1ee/0x2d0
[  103.074114]  ? __mutex_lock+0x620/0x1190
[  103.074126]  ? trace_hardirqs_on+0x6a/0x1c0
[  103.074137]  do_fb_ioctl+0x31e/0x700
[  103.074144]  ? fb_getput_cmap+0x280/0x280
[  103.074152]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074162]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074171]  ? __sanitizer_cov_trace_switch+0x67/0xf0
[  103.074181]  ? __sanitizer_cov_trace_const_cmp2+0x20/0x80
[  103.074191]  ? do_vfs_ioctl+0x14b/0x16c0
[  103.074199]  ? vfs_fileattr_set+0xb60/0xb60
[  103.074207]  ? rcu_read_lock_sched_held+0x11/0x80
[  103.074216]  ? lock_release+0x483/0x810
[  103.074224]  ? __fget_files+0x217/0x3d0
[  103.074234]  ? __fget_files+0x239/0x3d0
[  103.074243]  ? do_fb_ioctl+0x700/0x700
[  103.074250]  fb_ioctl+0xe6/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-3-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/kyro/fbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index 8482444259ce..d98c3f5d80df 100644
--- a/drivers/video/fbdev/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
@@ -399,6 +399,9 @@ static int kyrofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct kyrofb_info *par = info->par;
 
+	if (!var->pixclock)
+		return -EINVAL;
+
 	if (var->bits_per_pixel != 16 && var->bits_per_pixel != 32) {
 		printk(KERN_WARNING "kyrofb: depth not supported: %u\n", var->bits_per_pixel);
 		return -EINVAL;
-- 
2.30.2

[PATCH AUTOSEL 4.4 14/35] video: fbdev: riva: Error out if 'pixclock' equals zero

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit f92763cb0feba247e0939ed137b495601fd072a5 ]

The userspace program could pass any values to the driver through
ioctl() interface. If the driver doesn't check the value of 'pixclock',
it may cause divide error.

Fix this by checking whether 'pixclock' is zero first.

The following log reveals it:

[   33.396850] divide error: 0000 [#1] PREEMPT SMP KASAN PTI
[   33.396864] CPU: 5 PID: 11754 Comm: i740 Not tainted 5.14.0-rc2-00513-gac532c9bbcfb-dirty #222
[   33.396883] RIP: 0010:riva_load_video_mode+0x417/0xf70
[   33.396969] Call Trace:
[   33.396973]  ? debug_smp_processor_id+0x1c/0x20
[   33.396984]  ? tick_nohz_tick_stopped+0x1a/0x90
[   33.396996]  ? rivafb_copyarea+0x3c0/0x3c0
[   33.397003]  ? wake_up_klogd.part.0+0x99/0xd0
[   33.397014]  ? vprintk_emit+0x110/0x4b0
[   33.397024]  ? vprintk_default+0x26/0x30
[   33.397033]  ? vprintk+0x9c/0x1f0
[   33.397041]  ? printk+0xba/0xed
[   33.397054]  ? record_print_text.cold+0x16/0x16
[   33.397063]  ? __kasan_check_read+0x11/0x20
[   33.397074]  ? profile_tick+0xc0/0x100
[   33.397084]  ? __sanitizer_cov_trace_const_cmp4+0x24/0x80
[   33.397094]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397102]  rivafb_set_par+0xbe/0x610
[   33.397111]  ? riva_set_rop_solid+0x2a0/0x2a0
[   33.397119]  fb_set_var+0x5bf/0xeb0
[   33.397127]  ? fb_blank+0x1a0/0x1a0
[   33.397134]  ? lock_acquire+0x1ef/0x530
[   33.397143]  ? lock_release+0x810/0x810
[   33.397151]  ? lock_is_held_type+0x100/0x140
[   33.397159]  ? ___might_sleep+0x1ee/0x2d0
[   33.397170]  ? __mutex_lock+0x620/0x1190
[   33.397180]  ? trace_hardirqs_on+0x6a/0x1c0
[   33.397190]  do_fb_ioctl+0x31e/0x700

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1627293835-17441-4-git-send-email-zheyuma97@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/riva/fbdev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/fbdev/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index f1ad2747064b..6e5e29fe13db 100644
--- a/drivers/video/fbdev/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
@@ -1088,6 +1088,9 @@ static int rivafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 	int mode_valid = 0;
 	
 	NVTRACE_ENTER();
+	if (!var->pixclock)
+		return -EINVAL;
+
 	switch (var->bits_per_pixel) {
 	case 1 ... 8:
 		var->red.offset = var->green.offset = var->blue.offset = 0;
-- 
2.30.2

[PATCH AUTOSEL 4.4 15/35] ipv4: ip_output.c: Fix out-of-bounds warning in ip_copy_addrs()

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 6321c7acb82872ef6576c520b0e178eaad3a25c0 ]

Fix the following out-of-bounds warning:

    In function 'ip_copy_addrs',
        inlined from '__ip_queue_xmit' at net/ipv4/ip_output.c:517:2:
net/ipv4/ip_output.c:449:2: warning: 'memcpy' offset [40, 43] from the object at 'fl' is out of the bounds of referenced subobject 'saddr' with type 'unsigned int' at offset 36 [-Warray-bounds]
      449 |  memcpy(&iph->saddr, &fl4->saddr,
          |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      450 |         sizeof(fl4->saddr) + sizeof(fl4->daddr));
          |         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &iph->saddr and &fl4->saddr. As these are just
a couple of struct members, fix this by using direct assignments,
instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/d5ae2e65-1f18-2577-246f-bada7eee6ccd@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/ip_output.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index e808227c58d6..477540b3d320 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -376,8 +376,9 @@ static void ip_copy_addrs(struct iphdr *iph, const struct flowi4 *fl4)
 {
 	BUILD_BUG_ON(offsetof(typeof(*fl4), daddr) !=
 		     offsetof(typeof(*fl4), saddr) + sizeof(fl4->saddr));
-	memcpy(&iph->saddr, &fl4->saddr,
-	       sizeof(fl4->saddr) + sizeof(fl4->daddr));
+
+	iph->saddr = fl4->saddr;
+	iph->daddr = fl4->daddr;
 }
 
 /* Note: skb->sk can be different from sk, in case of tunnels */
-- 
2.30.2

[PATCH AUTOSEL 4.4 16/35] s390/jump_label: print real address in a case of a jump label bug

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 5492886c14744d239e87f1b0b774b5a341e755cc ]

In case of a jump label print the real address of the piece of code
where a mismatch was detected. This is right before the system panics,
so there is nothing revealed.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/jump_label.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c
index 083b05f5f5ab..cbc187706648 100644
--- a/arch/s390/kernel/jump_label.c
+++ b/arch/s390/kernel/jump_label.c
@@ -43,7 +43,7 @@ static void jump_label_bug(struct jump_entry *entry, struct insn *expected,
 	unsigned char *ipe = (unsigned char *)expected;
 	unsigned char *ipn = (unsigned char *)new;
 
-	pr_emerg("Jump label code mismatch at %pS [%p]\n", ipc, ipc);
+	pr_emerg("Jump label code mismatch at %pS [%px]\n", ipc, ipc);
 	pr_emerg("Found:    %6ph\n", ipc);
 	pr_emerg("Expected: %6ph\n", ipe);
 	pr_emerg("New:      %6ph\n", ipn);
-- 
2.30.2

[PATCH AUTOSEL 4.4 17/35] serial: 8250: Define RX trigger levels for OxSemi 950 devices

[Sasha Levin]

From: "Maciej W. Rozycki" <macro@orcam.me.uk>

[ Upstream commit d7aff291d069c4418285f3c8ee27b0ff67ce5998 ]

Oxford Semiconductor 950 serial port devices have a 128-byte FIFO and in
the enhanced (650) mode, which we select in `autoconfig_has_efr' with
the ECB bit set in the EFR register, they support the receive interrupt
trigger level selectable with FCR bits 7:6 from the set of 16, 32, 112,
120.  This applies to the original OX16C950 discrete UART[1] as well as
950 cores embedded into more complex devices.

For these devices we set the default to 112, which sets an excessively
high level of 112 or 7/8 of the FIFO capacity, unlike with other port
types where we choose at most 1/2 of their respective FIFO capacities.
Additionally we don't make the trigger level configurable.  Consequently
frequent input overruns happen with high bit rates where hardware flow
control cannot be used (e.g. terminal applications) even with otherwise
highly-performant systems.

Lower the default receive interrupt trigger level to 32 then, and make
it configurable.  Document the trigger levels along with other port
types, including the set of 16, 32, 64, 112 for the transmit interrupt
as well[2].

References:

[1] "OX16C950 rev B High Performance UART with 128 byte FIFOs", Oxford
    Semiconductor, Inc., DS-0031, Sep 05, Table 10: "Receiver Trigger
    Levels", p. 22

[2] same, Table 9: "Transmit Interrupt Trigger Levels", p. 22

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106260608480.37803@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_port.c | 3 ++-
 include/uapi/linux/serial_reg.h     | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 041bfe1d4191..d0d90752f9f3 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -124,7 +124,8 @@ static const struct serial8250_config uart_config[] = {
 		.name		= "16C950/954",
 		.fifo_size	= 128,
 		.tx_loadsz	= 128,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01,
+		.rxtrig_bytes	= {16, 32, 112, 120},
 		/* UART_CAP_EFR breaks billionon CF bluetooth card. */
 		.flags		= UART_CAP_FIFO | UART_CAP_SLEEP,
 	},
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index 1e5ac4e776da..5bcc637cee46 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -61,6 +61,7 @@
  * ST16C654:	 8  16  56  60		 8  16  32  56	PORT_16654
  * TI16C750:	 1  16  32  56		xx  xx  xx  xx	PORT_16750
  * TI16C752:	 8  16  56  60		 8  16  32  56
+ * OX16C950:	16  32 112 120		16  32  64 112	PORT_16C950
  * Tegra:	 1   4   8  14		16   8   4   1	PORT_TEGRA
  */
 #define UART_FCR_R_TRIG_00	0x00
-- 
2.30.2

[PATCH AUTOSEL 4.4 18/35] xtensa: ISS: don't panic in rs_init

[Sasha Levin]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 23411c720052ad860b3e579ee4873511e367130a ]

While alloc_tty_driver failure in rs_init would mean we have much bigger
problem, there is no reason to panic when tty_register_driver fails
there. It can fail for various reasons.

So handle the failure gracefully. Actually handle them both while at it.
This will make at least the console functional as it was enabled earlier
by console_initcall in iss_console_init. Instead of shooting down the
whole system.

We move tty_port_init() after alloc_tty_driver(), so that we don't need
to destroy the port in case the latter function fails.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/platforms/iss/console.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index 92d785fefb6d..5d264ae517f5 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -186,9 +186,13 @@ static const struct tty_operations serial_ops = {
 
 int __init rs_init(void)
 {
-	tty_port_init(&serial_port);
+	int ret;
 
 	serial_driver = alloc_tty_driver(SERIAL_MAX_NUM_LINES);
+	if (!serial_driver)
+		return -ENOMEM;
+
+	tty_port_init(&serial_port);
 
 	printk ("%s %s\n", serial_name, serial_version);
 
@@ -208,8 +212,15 @@ int __init rs_init(void)
 	tty_set_operations(serial_driver, &serial_ops);
 	tty_port_link_device(&serial_port, serial_driver, 0);
 
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
+	ret = tty_register_driver(serial_driver);
+	if (ret) {
+		pr_err("Couldn't register serial driver\n");
+		tty_driver_kref_put(serial_driver);
+		tty_port_destroy(&serial_port);
+
+		return ret;
+	}
+
 	return 0;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 19/35] hvsi: don't panic on tty_register_driver failure

[Sasha Levin]

From: Jiri Slaby <jslaby@suse.cz>

[ Upstream commit 7ccbdcc4d08a6d7041e4849219bbb12ffa45db4c ]

The alloc_tty_driver failure is handled gracefully in hvsi_init. But
tty_register_driver is not. panic is called if that one fails.

So handle the failure of tty_register_driver gracefully too. This will
keep at least the console functional as it was enabled earlier by
console_initcall in hvsi_console_init. Instead of shooting down the
whole system.

This means, we disable interrupts and restore hvsi_wait back to
poll_for_state().

Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/hvc/hvsi.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/hvc/hvsi.c b/drivers/tty/hvc/hvsi.c
index a75146f600cb..3e29f5f0d4ca 100644
--- a/drivers/tty/hvc/hvsi.c
+++ b/drivers/tty/hvc/hvsi.c
@@ -1051,7 +1051,7 @@ static const struct tty_operations hvsi_ops = {
 
 static int __init hvsi_init(void)
 {
-	int i;
+	int i, ret;
 
 	hvsi_driver = alloc_tty_driver(hvsi_count);
 	if (!hvsi_driver)
@@ -1082,12 +1082,25 @@ static int __init hvsi_init(void)
 	}
 	hvsi_wait = wait_for_state; /* irqs active now */
 
-	if (tty_register_driver(hvsi_driver))
-		panic("Couldn't register hvsi console driver\n");
+	ret = tty_register_driver(hvsi_driver);
+	if (ret) {
+		pr_err("Couldn't register hvsi console driver\n");
+		goto err_free_irq;
+	}
 
 	printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
 
 	return 0;
+err_free_irq:
+	hvsi_wait = poll_for_state;
+	for (i = 0; i < hvsi_count; i++) {
+		struct hvsi_struct *hp = &hvsi_ports[i];
+
+		free_irq(hp->virq, hp);
+	}
+	tty_driver_kref_put(hvsi_driver);
+
+	return ret;
 }
 device_initcall(hvsi_init);
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 20/35] serial: 8250_pci: make setup_port() parameters explicitly unsigned

[Sasha Levin]

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3a96e97ab4e835078e6f27b7e1c0947814df3841 ]

The bar and offset parameters to setup_port() are used in pointer math,
and while it would be very difficult to get them to wrap as a negative
number, just be "safe" and make them unsigned so that static checkers do
not trip over them unintentionally.

Cc: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Jordy Zomer <jordy@pwning.systems>
Link: https://lore.kernel.org/r/20210726130717.2052096-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/8250/8250_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 72f6cde146b5..db66e533319e 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -78,7 +78,7 @@ static void moan_device(const char *str, struct pci_dev *dev)
 
 static int
 setup_port(struct serial_private *priv, struct uart_8250_port *port,
-	   int bar, int offset, int regshift)
+	   u8 bar, unsigned int offset, int regshift)
 {
 	struct pci_dev *dev = priv->dev;
 
-- 
2.30.2

[PATCH AUTOSEL 4.4 21/35] Bluetooth: skip invalid hci_sync_conn_complete_evt

[Sasha Levin]

From: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>

[ Upstream commit 92fe24a7db751b80925214ede43f8d2be792ea7b ]

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_event.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 7ed3c7df271a..6528ecc3a3bc 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3747,6 +3747,21 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev,
 
 	switch (ev->status) {
 	case 0x00:
+		/* The synchronous connection complete event should only be
+		 * sent once per new connection. Receiving a successful
+		 * complete event when the connection status is already
+		 * BT_CONNECTED means that the device is misbehaving and sent
+		 * multiple complete event packets for the same new connection.
+		 *
+		 * Registering the device more than once can corrupt kernel
+		 * memory, hence upon detecting this invalid event, we report
+		 * an error and ignore the packet.
+		 */
+		if (conn->state == BT_CONNECTED) {
+			bt_dev_err(hdev, "Ignoring connect complete event for existing connection");
+			goto unlock;
+		}
+
 		conn->handle = __le16_to_cpu(ev->handle);
 		conn->state  = BT_CONNECTED;
 		conn->type   = ev->link_type;
-- 
2.30.2

[PATCH AUTOSEL 4.4 22/35] gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port()

[Sasha Levin]

From: Tuo Li <islituo@gmail.com>

[ Upstream commit a211260c34cfadc6068fece8c9e99e0fe1e2a2b6 ]

The variable val is declared without initialization, and its address is
passed to amdgpu_i2c_get_byte(). In this function, the value of val is
accessed in:
  DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n",
       addr, *val);

Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized,
but it is accessed in:
  val &= ~amdgpu_connector->router.ddc_mux_control_pin;

To fix this possible uninitialized-variable access, initialize val to 0 in
amdgpu_i2c_router_select_ddc_port().

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
index 31a676376d73..3490d300bed2 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_i2c.c
@@ -340,7 +340,7 @@ static void amdgpu_i2c_put_byte(struct amdgpu_i2c_chan *i2c_bus,
 void
 amdgpu_i2c_router_select_ddc_port(struct amdgpu_connector *amdgpu_connector)
 {
-	u8 val;
+	u8 val = 0;
 
 	if (!amdgpu_connector->router.ddc_valid)
 		return;
-- 
2.30.2

[PATCH AUTOSEL 4.4 23/35] ARM: tegra: tamonten: Fix UART pad setting

[Sasha Levin]

From: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>

[ Upstream commit 2270ad2f4e123336af685ecedd1618701cb4ca1e ]

This patch fixes the tristate and pullup configuration for UART 1 to 3
on the Tamonten SOM.

Signed-off-by: Andreas Obergschwandtner <andreas.obergschwandtner@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 13d4e6185275..c70d1ec02957 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -180,8 +180,9 @@ conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
 					"cdev1", "cdev2", "dap1", "dtb", "gma",
 					"gmb", "gmc", "gmd", "gme", "gpu7",
-					"gpv", "i2cp", "pta", "rm", "slxa",
-					"slxk", "spia", "spib", "uac";
+					"gpv", "i2cp", "irrx", "irtx", "pta",
+					"rm", "slxa", "slxk", "spia", "spib",
+					"uac";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -206,7 +207,7 @@ conf_crtp {
 			conf_ddc {
 				nvidia,pins = "ddc", "dta", "dtd", "kbca",
 					"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
-					"sdc";
+					"sdc", "uad", "uca";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_DISABLE>;
 			};
@@ -216,10 +217,9 @@ conf_hdint {
 					"lvp0", "owc", "sdb";
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-			conf_irrx {
-				nvidia,pins = "irrx", "irtx", "sdd", "spic",
-					"spie", "spih", "uaa", "uab", "uad",
-					"uca", "ucb";
+			conf_sdd {
+				nvidia,pins = "sdd", "spic", "spie", "spih",
+					"uaa", "uab", "ucb";
 				nvidia,pull = <TEGRA_PIN_PULL_UP>;
 				nvidia,tristate = <TEGRA_PIN_ENABLE>;
 			};
-- 
2.30.2

[PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

[Sasha Levin]

From: Bob Moore <robert.moore@intel.com>

[ Upstream commit 87b8ec5846cb81747088d1729acaf55a1155a267 ]

Handle the case where the Command-line Arguments table field
does not exist.

ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6

Link: https://github.com/acpica/acpica/commit/d6487164
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/acpi/actbl3.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index 1df891660f43..81d5ebc886f5 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -738,6 +738,10 @@ struct acpi_table_wpbt {
 	u16 arguments_length;
 };
 
+struct acpi_wpbt_unicode {
+	u16 *unicode_string;
+};
+
 /*******************************************************************************
  *
  * XENV - Xen Environment Table (ACPI 6.0)
-- 
2.30.2

Re: [PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 813 bytes --]

Hi!

> Handle the case where the Command-line Arguments table field
> does not exist.
> 
> ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6

I'm not sure what is going on here, but adding unused definition will
not make any difference for 4.4 users, so we don't need this in
-stable...?

Best regards,
								Pavel

> +++ b/include/acpi/actbl3.h
> @@ -738,6 +738,10 @@ struct acpi_table_wpbt {
>  	u16 arguments_length;
>  };
>  
> +struct acpi_wpbt_unicode {
> +	u16 *unicode_string;
> +};
> +
>  /*******************************************************************************
>   *
>   * XENV - Xen Environment Table (ACPI 6.0)

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

[Sasha Levin]

On Fri, Sep 10, 2021 at 09:45:36AM +0200, Pavel Machek wrote:
>Hi!
>
>> Handle the case where the Command-line Arguments table field
>> does not exist.
>>
>> ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6
>
>I'm not sure what is going on here, but adding unused definition will
>not make any difference for 4.4 users, so we don't need this in
>-stable...?

Ugh, dropped, thanks!

I wonder what this patch actually does upstream.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

[Rafael J. Wysocki]

On Sat, Sep 11, 2021 at 4:38 PM Sasha Levin <sashal@kernel.org> wrote:
>
> On Fri, Sep 10, 2021 at 09:45:36AM +0200, Pavel Machek wrote:
> >Hi!
> >
> >> Handle the case where the Command-line Arguments table field
> >> does not exist.
> >>
> >> ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6
> >
> >I'm not sure what is going on here, but adding unused definition will
> >not make any difference for 4.4 users, so we don't need this in
> >-stable...?
>
> Ugh, dropped, thanks!
>
> I wonder what this patch actually does upstream.

There are AML compiler changes in it, but the compiler is not included
into the Linux kernel.

RE: [PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

[Moore, Robert]

This structure is used by the iASL data table disassembler.
Bob


-----Original Message-----
From: Pavel Machek <pavel@denx.de> 
Sent: Friday, September 10, 2021 12:46 AM
To: Sasha Levin <sashal@kernel.org>
Cc: linux-kernel@vger.kernel.org; stable@vger.kernel.org; Moore, Robert <robert.moore@intel.com>; Wysocki, Rafael J <rafael.j.wysocki@intel.com>; linux-acpi@vger.kernel.org; devel@acpica.org
Subject: Re: [PATCH AUTOSEL 4.4 24/35] ACPICA: iASL: Fix for WPBT table with no command-line arguments

Hi!

> Handle the case where the Command-line Arguments table field does not 
> exist.
> 
> ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6

I'm not sure what is going on here, but adding unused definition will not make any difference for 4.4 users, so we don't need this in -stable...?

Best regards,
								Pavel

> +++ b/include/acpi/actbl3.h
> @@ -738,6 +738,10 @@ struct acpi_table_wpbt {
>  	u16 arguments_length;
>  };
>  
> +struct acpi_wpbt_unicode {
> +	u16 *unicode_string;
> +};
> +
>  /*******************************************************************************
>   *
>   * XENV - Xen Environment Table (ACPI 6.0)

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[PATCH AUTOSEL 4.4 25/35] rpc: fix gss_svc_init cleanup on failure

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 5a4753446253a427c0ff1e433b9c4933e5af207c ]

The failure case here should be rare, but it's obviously wrong.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/svcauth_gss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index bb8b0ef5de82..daf0c1ea3917 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1845,7 +1845,7 @@ gss_svc_init_net(struct net *net)
 		goto out2;
 	return 0;
 out2:
-	destroy_use_gss_proxy_proc_entry(net);
+	rsi_cache_destroy_net(net);
 out1:
 	rsc_cache_destroy_net(net);
 	return rv;
-- 
2.30.2

[PATCH AUTOSEL 4.4 26/35] gfs2: Don't call dlm after protocol is unmounted

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit d1340f80f0b8066321b499a376780da00560e857 ]

In the gfs2 withdraw sequence, the dlm protocol is unmounted with a call
to lm_unmount. After a withdraw, users are allowed to unmount the
withdrawn file system. But at that point we may still have glocks left
over that we need to free via unmount's call to gfs2_gl_hash_clear.
These glocks may have never been completed because of whatever problem
caused the withdraw (IO errors or whatever).

Before this patch, function gdlm_put_lock would still try to call into
dlm to unlock these leftover glocks, which resulted in dlm returning
-EINVAL because the lock space was abandoned. These glocks were never
freed because there was no mechanism after that to free them.

This patch adds a check to gdlm_put_lock to see if the locking protocol
was inactive (DFL_UNMOUNT flag) and if so, free the glock and not
make the invalid call into dlm.

I could have combined this "if" with the one that follows, related to
leftover glock LVBs, but I felt the code was more readable with its own
if clause.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/lock_dlm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index 3cbc9147286d..da9f97911852 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -296,6 +296,11 @@ static void gdlm_put_lock(struct gfs2_glock *gl)
 	gfs2_sbstats_inc(gl, GFS2_LKS_DCOUNT);
 	gfs2_update_request_times(gl);
 
+	/* don't want to call dlm if we've unmounted the lock protocol */
+	if (test_bit(DFL_UNMOUNT, &ls->ls_recover_flags)) {
+		gfs2_glock_free(gl);
+		return;
+	}
 	/* don't want to skip dlm_unlock writing the lvb when lock has one */
 
 	if (test_bit(SDF_SKIP_DLM_UNLOCK, &sdp->sd_flags) &&
-- 
2.30.2

[PATCH AUTOSEL 4.4 27/35] btrfs: subpage: check if there are compressed extents inside one page

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit 3670e6451bc9c39ab3a46f1da19360219e4319f3 ]

[BUG]
When testing experimental subpage compressed write support, it hits a
NULL pointer dereference inside read path:

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
 pc : __pi_memcmp+0x28/0x1ec
 lr : check_data_csum+0xd0/0x274 [btrfs]
 Call trace:
  __pi_memcmp+0x28/0x1ec
  btrfs_verify_data_csum+0xf4/0x244 [btrfs]
  end_bio_extent_readpage+0x1d0/0x6b0 [btrfs]
  bio_endio+0x15c/0x1dc
  end_workqueue_fn+0x44/0x64 [btrfs]
  btrfs_work_helper+0x74/0x250 [btrfs]
  process_one_work+0x1d4/0x47c
  worker_thread+0x180/0x400
  kthread+0x11c/0x120
  ret_from_fork+0x10/0x30
 Code: 54000261 d100044c d343fd8c f8408403 (f8408424)
 ---[ end trace 9e2c59f33ea40866 ]---

[CAUSE]
When reading two compressed extents inside the same page, like the
following layout, we trigger above crash:

	0	32K	64K
	|-------|\\\\\\\|
	     |	     \- Compressed extent (A)
	     \--------- Compressed extent (B)

For compressed read, we don't need to populate its io_bio->csum, as we
rely on compressed_bio->csum to verify the compressed data, and then
copy the decompressed to inode pages.

Normally btrfs_verify_data_csum() skip such page by checking and
clearing its PageChecked flag

But since that flag is still for the full page, when endio for inode
page range [0, 32K) gets executed, it clears PageChecked flag for the
full page.

Then when endio for inode page range [32K, 64K) gets executed, since the
page no longer has PageChecked flag, it just continues checking, even
though io_bio->csum is NULL.

[FIX]
Thankfully there are only two users of PageChecked bit:

- Cow fixup
  Since subpage has its own way to trace page dirty (dirty_bitmap) and
  ordered bit (ordered_bitmap), it should never trigger cow fixup.

- Compressed read
  We can distinguish such read by just checking io_bio->csum.

So just check io_bio->csum before doing the verification to avoid such
NULL pointer dereference.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index da4ad006739d..8a2dc96b62b4 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3146,6 +3146,20 @@ static int btrfs_readpage_end_io_hook(struct btrfs_io_bio *io_bio,
 		return 0;
 	}
 
+	/*
+	 * For subpage case, above PageChecked is not safe as it's not subpage
+	 * compatible.
+	 * But for now only cow fixup and compressed read utilize PageChecked
+	 * flag, while in this context we can easily use io_bio->csum to
+	 * determine if we really need to do csum verification.
+	 *
+	 * So for now, just exit if io_bio->csum is NULL, as it means it's
+	 * compressed read, and its compressed data csum has already been
+	 * verified.
+	 */
+	if (io_bio->csum == NULL)
+		return 0;
+
 	if (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)
 		return 0;
 
-- 
2.30.2

Re: [PATCH AUTOSEL 4.4 27/35] btrfs: subpage: check if there are compressed extents inside one page

[David Sterba]

On Thu, Sep 09, 2021 at 08:01:08AM -0400, Sasha Levin wrote:
> From: Qu Wenruo <wqu@suse.com>
> 
> [ Upstream commit 3670e6451bc9c39ab3a46f1da19360219e4319f3 ]

Please drop this patch from stable queue, thanks.

[PATCH AUTOSEL 4.4 28/35] btrfs: subpage: fix race between prepare_pages() and btrfs_releasepage()

[Sasha Levin]

From: Qu Wenruo <wqu@suse.com>

[ Upstream commit e0467866198f7f536806f39e5d0d91ae8018de08 ]

[BUG]
When running generic/095, there is a high chance to crash with subpage
data RW support:

 assertion failed: PagePrivate(page) && page->private
 ------------[ cut here ]------------
 kernel BUG at fs/btrfs/ctree.h:3403!
 Internal error: Oops - BUG: 0 [#1] SMP
 CPU: 1 PID: 3567 Comm: fio Tainted: 5.12.0-rc7-custom+ #17
 Hardware name: Khadas VIM3 (DT)
 Call trace:
  assertfail.constprop.0+0x28/0x2c [btrfs]
  btrfs_subpage_assert+0x80/0xa0 [btrfs]
  btrfs_subpage_set_uptodate+0x34/0xec [btrfs]
  btrfs_page_clamp_set_uptodate+0x74/0xa4 [btrfs]
  btrfs_dirty_pages+0x160/0x270 [btrfs]
  btrfs_buffered_write+0x444/0x630 [btrfs]
  btrfs_direct_write+0x1cc/0x2d0 [btrfs]
  btrfs_file_write_iter+0xc0/0x160 [btrfs]
  new_sync_write+0xe8/0x180
  vfs_write+0x1b4/0x210
  ksys_pwrite64+0x7c/0xc0
  __arm64_sys_pwrite64+0x24/0x30
  el0_svc_common.constprop.0+0x70/0x140
  do_el0_svc+0x28/0x90
  el0_svc+0x2c/0x54
  el0_sync_handler+0x1a8/0x1ac
  el0_sync+0x170/0x180
 Code: f0000160 913be042 913c4000 955444bc (d4210000)
 ---[ end trace 3fdd39f4cccedd68 ]---

[CAUSE]
Although prepare_pages() calls find_or_create_page(), which returns the
page locked, but in later prepare_uptodate_page() calls, we may call
btrfs_readpage() which will unlock the page before it returns.

This leaves a window where btrfs_releasepage() can sneak in and release
the page, clearing page->private and causing above ASSERT().

[FIX]
In prepare_uptodate_page(), we should not only check page->mapping, but
also PagePrivate() to ensure we are still holding the correct page which
has proper fs context setup.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/file.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 2426dc56426f..c917a04118cc 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1307,7 +1307,18 @@ static int prepare_uptodate_page(struct inode *inode,
 			unlock_page(page);
 			return -EIO;
 		}
-		if (page->mapping != inode->i_mapping) {
+
+		/*
+		 * Since btrfs_readpage() will unlock the page before it
+		 * returns, there is a window where btrfs_releasepage() can
+		 * be called to release the page.
+		 * Here we check both inode mapping and PagePrivate() to
+		 * make sure the page was not released.
+		 *
+		 * The private flag check is essential for subpage as we need
+		 * to store extra bitmap using page->private.
+		 */
+		if (page->mapping != inode->i_mapping || !PagePrivate(page)) {
 			unlock_page(page);
 			return -EAGAIN;
 		}
-- 
2.30.2

Re: [PATCH AUTOSEL 4.4 28/35] btrfs: subpage: fix race between prepare_pages() and btrfs_releasepage()

[David Sterba]

On Thu, Sep 09, 2021 at 08:01:09AM -0400, Sasha Levin wrote:
> From: Qu Wenruo <wqu@suse.com>
> 
> [ Upstream commit e0467866198f7f536806f39e5d0d91ae8018de08 ]

Please drop this patch from stable queue, thanks.

[PATCH AUTOSEL 4.4 29/35] ASoC: intel: atom: Revert PCM buffer address setup workaround again

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit e28ac04a705e946eddc5e7d2fc712dea3f20fe9e ]

We worked around the breakage of PCM buffer setup by the commit
65ca89c2b12c ("ASoC: intel: atom: Fix breakage for PCM buffer address
setup"), but this isn't necessary since the CONTINUOUS buffer type
also sets runtime->dma_addr since commit f84ba106a018 ("ALSA:
memalloc: Store snd_dma_buffer.addr for continuous pages, too").
Let's revert the change again.

Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/intel/atom/sst-mfld-platform-pcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/intel/atom/sst-mfld-platform-pcm.c b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
index d0d338533eb6..64079423b298 100644
--- a/sound/soc/intel/atom/sst-mfld-platform-pcm.c
+++ b/sound/soc/intel/atom/sst-mfld-platform-pcm.c
@@ -134,7 +134,7 @@ static void sst_fill_alloc_params(struct snd_pcm_substream *substream,
 	snd_pcm_uframes_t period_size;
 	ssize_t periodbytes;
 	ssize_t buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
-	u32 buffer_addr = virt_to_phys(substream->runtime->dma_area);
+	u32 buffer_addr = substream->runtime->dma_addr;
 
 	channels = substream->runtime->channels;
 	period_size = substream->runtime->period_size;
-- 
2.30.2

Re: [PATCH AUTOSEL 4.4 29/35] ASoC: intel: atom: Revert PCM buffer address setup workaround again

[Takashi Iwai]

On Thu, 09 Sep 2021 14:01:10 +0200,
Sasha Levin wrote:
> 
> From: Takashi Iwai <tiwai@suse.de>
> 
> [ Upstream commit e28ac04a705e946eddc5e7d2fc712dea3f20fe9e ]
> 
> We worked around the breakage of PCM buffer setup by the commit
> 65ca89c2b12c ("ASoC: intel: atom: Fix breakage for PCM buffer address
> setup"), but this isn't necessary since the CONTINUOUS buffer type
> also sets runtime->dma_addr since commit f84ba106a018 ("ALSA:
> memalloc: Store snd_dma_buffer.addr for continuous pages, too").
> Let's revert the change again.
> 
> Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

Please drop this.


Takashi

Re: [PATCH AUTOSEL 4.4 29/35] ASoC: intel: atom: Revert PCM buffer address setup workaround again

[Sasha Levin]

On Thu, Sep 09, 2021 at 02:07:14PM +0200, Takashi Iwai wrote:
>On Thu, 09 Sep 2021 14:01:10 +0200,
>Sasha Levin wrote:
>>
>> From: Takashi Iwai <tiwai@suse.de>
>>
>> [ Upstream commit e28ac04a705e946eddc5e7d2fc712dea3f20fe9e ]
>>
>> We worked around the breakage of PCM buffer setup by the commit
>> 65ca89c2b12c ("ASoC: intel: atom: Fix breakage for PCM buffer address
>> setup"), but this isn't necessary since the CONTINUOUS buffer type
>> also sets runtime->dma_addr since commit f84ba106a018 ("ALSA:
>> memalloc: Store snd_dma_buffer.addr for continuous pages, too").
>> Let's revert the change again.
>>
>> Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de
>> Signed-off-by: Takashi Iwai <tiwai@suse.de>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>Please drop this.

Will do, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 4.4 30/35] mmc: rtsx_pci: Fix long reads when clock is prescaled

[Sasha Levin]

From: Thomas Hebb <tommyhebb@gmail.com>

[ Upstream commit 3ac5e45291f3f0d699a721357380d4593bc2dcb3 ]

For unexplained reasons, the prescaler register for this device needs to
be cleared (set to 1) while performing a data read or else the command
will hang. This does not appear to affect the real clock rate sent out
on the bus, so I assume it's purely to work around a hardware bug.

During normal operation, the prescaler is already set to 1, so nothing
needs to be done. However, in "initial mode" (which is used for sub-MHz
clock speeds, like the core sets while enumerating cards), it's set to
128 and so we need to reset it during data reads. We currently fail to
do this for long reads.

This has no functional affect on the driver's operation currently
written, as the MMC core always sets a clock above 1MHz before
attempting any long reads. However, the core could conceivably set any
clock speed at any time and the driver should still work, so I think
this fix is worthwhile.

I personally encountered this issue while performing data recovery on an
external chip. My connections had poor signal integrity, so I modified
the core code to reduce the clock speed. Without this change, I saw the
card enumerate but was unable to actually read any data.

Writes don't seem to work in the situation described above even with
this change (and even if the workaround is extended to encompass data
write commands). I was not able to find a way to get them working.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Link: https://lore.kernel.org/r/2fef280d8409ab0100c26c6ac7050227defd098d.1627818365.git.tommyhebb@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/rtsx_pci_sdmmc.c | 36 ++++++++++++++++++++-----------
 1 file changed, 23 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 93137483ecde..10ec88833889 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -553,9 +553,22 @@ static int sd_write_long_data(struct realtek_pci_sdmmc *host,
 	return 0;
 }
 
+static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+	rtsx_pci_write_register(host->pcr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
+}
+
+static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host)
+{
+	rtsx_pci_write_register(host->pcr, SD_CFG1,
+			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+}
+
 static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
 {
 	struct mmc_data *data = mrq->data;
+	int err;
 
 	if (host->sg_count < 0) {
 		data->error = host->sg_count;
@@ -564,22 +577,19 @@ static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
 		return data->error;
 	}
 
-	if (data->flags & MMC_DATA_READ)
-		return sd_read_long_data(host, mrq);
+	if (data->flags & MMC_DATA_READ) {
+		if (host->initial_mode)
+			sd_disable_initial_mode(host);
 
-	return sd_write_long_data(host, mrq);
-}
+		err = sd_read_long_data(host, mrq);
 
-static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
-{
-	rtsx_pci_write_register(host->pcr, SD_CFG1,
-			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_128);
-}
+		if (host->initial_mode)
+			sd_enable_initial_mode(host);
 
-static inline void sd_disable_initial_mode(struct realtek_pci_sdmmc *host)
-{
-	rtsx_pci_write_register(host->pcr, SD_CFG1,
-			SD_CLK_DIVIDE_MASK, SD_CLK_DIVIDE_0);
+		return err;
+	}
+
+	return sd_write_long_data(host, mrq);
 }
 
 static void sd_normal_rw(struct realtek_pci_sdmmc *host,
-- 
2.30.2

[PATCH AUTOSEL 4.4 31/35] cifs: fix wrong release in sess_alloc_buffer() failed path

[Sasha Levin]

From: Ding Hui <dinghui@sangfor.com.cn>

[ Upstream commit d72c74197b70bc3c95152f351a568007bffa3e11 ]

smb_buf is allocated by small_smb_init_no_tc(), and buf type is
CIFS_SMALL_BUFFER, so we should use cifs_small_buf_release() to
release it in failed path.

Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/sess.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 9bc7a29f88d6..2d3918cdcc28 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -602,7 +602,7 @@ sess_alloc_buffer(struct sess_data *sess_data, int wct)
 	return 0;
 
 out_free_smb_buf:
-	kfree(smb_buf);
+	cifs_small_buf_release(smb_buf);
 	sess_data->iov[0].iov_base = NULL;
 	sess_data->iov[0].iov_len = 0;
 	sess_data->buf0_type = CIFS_NO_BUFFER;
-- 
2.30.2

[PATCH AUTOSEL 4.4 32/35] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b1994b03341f..bd010f8caf87 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4438,19 +4438,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
-	else
-		timeout_ns = udev->u1_params.sel;
-
 	/* Prevent U1 if service interval is shorter than U1 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
 			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
 	/* The U1 timeout is encoded in 1us intervals.
 	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
 	 */
@@ -4502,19 +4502,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
-	else
-		timeout_ns = udev->u2_params.sel;
-
 	/* Prevent U2 if service interval is shorter than U2 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
 			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
 	/* The U2 timeout is encoded in 256us intervals */
 	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
 	/* If the necessary timeout value is bigger than what we can set in the
-- 
2.30.2

[PATCH AUTOSEL 4.4 33/35] parport: remove non-zero check on count

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 0be883a0d795d9146f5325de582584147dd0dcdc ]

The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.

Note that this code is pre-git history, so I can't find a sha for
it.

Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parport/ieee1284_ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c
index 2e21af43d91e..b6d808037045 100644
--- a/drivers/parport/ieee1284_ops.c
+++ b/drivers/parport/ieee1284_ops.c
@@ -534,7 +534,7 @@ size_t parport_ieee1284_ecp_read_data (struct parport *port,
 				goto out;
 
 			/* Yield the port for a while. */
-			if (count && dev->port->irq != PARPORT_IRQ_NONE) {
+			if (dev->port->irq != PARPORT_IRQ_NONE) {
 				parport_release (dev);
 				schedule_timeout_interruptible(msecs_to_jiffies(40));
 				parport_claim_or_block (dev);
-- 
2.30.2

[PATCH AUTOSEL 4.4 34/35] ath9k: fix OOB read ar9300_eeprom_restore_internal

[Sasha Levin]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit 23151b9ae79e3bc4f6a0c4cd3a7f355f68dad128 ]

Bad header can have large length field which can cause OOB.
cptr is the last bytes for read, and the eeprom is parsed
from high to low address. The OOB, triggered by the condition
length > cptr could cause memory error with a read on
negative index.

There are some sanity check around length, but it is not
compared with cptr (the remaining bytes). Here, the
corrupted/bad EEPROM can cause panic.

I was able to reproduce the crash, but I cannot find the
log and the reproducer now. After I applied the patch, the
bug is no longer reproducible.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YM3xKsQJ0Hw2hjrc@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index c876dc2437b0..96e1f54cccaf 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3345,7 +3345,8 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 			"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
 			cptr, code, reference, length, major, minor);
 		if ((!AR_SREV_9485(ah) && length >= 1024) ||
-		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485) ||
+		    (length > cptr)) {
 			ath_dbg(common, EEPROM, "Skipping bad header\n");
 			cptr -= COMP_HDR_LEN;
 			continue;
-- 
2.30.2

[PATCH AUTOSEL 4.4 35/35] net: fix NULL pointer reference in cipso_v4_doi_free

[Sasha Levin]

From: 王贇 <yun.wang@linux.alibaba.com>

[ Upstream commit 733c99ee8be9a1410287cdbb943887365e83b2d6 ]

In netlbl_cipsov4_add_std() when 'doi_def->map.std' alloc
failed, we sometime observe panic:

  BUG: kernel NULL pointer dereference, address:
  ...
  RIP: 0010:cipso_v4_doi_free+0x3a/0x80
  ...
  Call Trace:
   netlbl_cipsov4_add_std+0xf4/0x8c0
   netlbl_cipsov4_add+0x13f/0x1b0
   genl_family_rcv_msg_doit.isra.15+0x132/0x170
   genl_rcv_msg+0x125/0x240

This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.

This patch just add the check to prevent panic happen for similar
cases.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netlabel/netlabel_cipso_v4.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c
index 7fd1104ba900..d17a8f3d3387 100644
--- a/net/netlabel/netlabel_cipso_v4.c
+++ b/net/netlabel/netlabel_cipso_v4.c
@@ -163,8 +163,8 @@ static int netlbl_cipsov4_add_std(struct genl_info *info,
 		return -ENOMEM;
 	doi_def->map.std = kzalloc(sizeof(*doi_def->map.std), GFP_KERNEL);
 	if (doi_def->map.std == NULL) {
-		ret_val = -ENOMEM;
-		goto add_std_failure;
+		kfree(doi_def);
+		return -ENOMEM;
 	}
 	doi_def->type = CIPSO_V4_MAP_TRANS;
 
-- 
2.30.2