[PATCH AUTOSEL 4.14 1/5] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[PATCH AUTOSEL 4.14 1/5] dt-bindings: mtd: gpmc: Fix the ECC bytes vs. OOB bytes equation

[Sasha Levin]

From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit 778cb8e39f6ec252be50fc3850d66f3dcbd5dd5a ]

"PAGESIZE / 512" is the number of ECC chunks.
"ECC_BYTES" is the number of bytes needed to store a single ECC code.
"2" is the space reserved by the bad block marker.

"2 + (PAGESIZE / 512) * ECC_BYTES" should of course be lower or equal
than the total number of OOB bytes, otherwise it won't fit.

Fix the equation by substituting s/>=/<=/.

Suggested-by: Ryan J. Barnett <ryan.barnett@collins.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20210610143945.3504781-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index dd559045593d..d2d1bae63a36 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -123,7 +123,7 @@ on various other factors also like;
 	so the device should have enough free bytes available its OOB/Spare
 	area to accommodate ECC for entire page. In general following expression
 	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" >= OOBSIZE"
+	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
 	where
 		OOBSIZE		number of bytes in OOB/spare area
 		PAGESIZE	number of bytes in main-area of device page
-- 
2.30.2

[PATCH AUTOSEL 4.14 2/5] mfd: Don't use irq_create_mapping() to resolve a mapping

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 9ff80e2de36d0554e3a6da18a171719fe8663c17 ]

Although irq_create_mapping() is able to deal with duplicate
mappings, it really isn't supposed to be a substitute for
irq_find_mapping(), and can result in allocations that take place
in atomic context if the mapping didn't exist.

Fix the handful of MFD drivers that use irq_create_mapping() in
interrupt context by using irq_find_mapping() instead.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/ab8500-core.c | 2 +-
 drivers/mfd/stmpe.c       | 4 ++--
 drivers/mfd/tc3589x.c     | 2 +-
 drivers/mfd/wm8994-irq.c  | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 11ab17f64c64..f0527e769867 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -493,7 +493,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
 			line += 1;
 
-		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
+		handle_nested_irq(irq_find_mapping(ab8500->domain, line));
 	}
 
 	return 0;
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 566caca4efd8..722ad2c368a5 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1035,7 +1035,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 
 	if (variant->id_val == STMPE801_ID ||
 	    variant->id_val == STMPE1600_ID) {
-		int base = irq_create_mapping(stmpe->domain, 0);
+		int base = irq_find_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
 		return IRQ_HANDLED;
@@ -1063,7 +1063,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		while (status) {
 			int bit = __ffs(status);
 			int line = bank * 8 + bit;
-			int nestedirq = irq_create_mapping(stmpe->domain, line);
+			int nestedirq = irq_find_mapping(stmpe->domain, line);
 
 			handle_nested_irq(nestedirq);
 			status &= ~(1 << bit);
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index cc9e563f23aa..7062baf60685 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -187,7 +187,7 @@ static irqreturn_t tc3589x_irq(int irq, void *data)
 
 	while (status) {
 		int bit = __ffs(status);
-		int virq = irq_create_mapping(tc3589x->domain, bit);
+		int virq = irq_find_mapping(tc3589x->domain, bit);
 
 		handle_nested_irq(virq);
 		status &= ~(1 << bit);
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 18710f3b5c53..2c58d9b99a39 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -159,7 +159,7 @@ static irqreturn_t wm8994_edge_irq(int irq, void *data)
 	struct wm8994 *wm8994 = data;
 
 	while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
-		handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
+		handle_nested_irq(irq_find_mapping(wm8994->edge_irq, 0));
 
 	return IRQ_HANDLED;
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 3/5] PCI: Add ACS quirks for Cavium multi-function devices

[Sasha Levin]

From: George Cherian <george.cherian@marvell.com>

[ Upstream commit 32837d8a8f63eb95dcb9cd005524a27f06478832 ]

Some Cavium endpoints are implemented as multi-function devices without ACS
capability, but they actually don't support peer-to-peer transactions.

Add ACS quirks to declare DMA isolation for the following devices:

  - BGX device found on Octeon-TX (8xxx)
  - CGX device found on Octeon-TX2 (9xxx)
  - RPM device found on Octeon-TX3 (10xxx)

Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com
Signed-off-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index db1ec8209b56..2d80fe392cfd 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -4738,6 +4738,10 @@ static const struct pci_dev_acs_enabled {
 	{ 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
 	/* Cavium ThunderX */
 	{ PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
+	/* Cavium multi-function devices */
+	{ PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
 	/* APM X-Gene */
 	{ PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
 	/* Ampere Computing */
-- 
2.30.2

[PATCH AUTOSEL 4.14 4/5] net: usb: cdc_mbim: avoid altsetting toggling for Telit LN920

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit aabbdc67f3485b5db27ab4eba01e5fbf1ffea62c ]

Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit LN920
0x1061 composition in order to avoid bind error.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/cdc_mbim.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 0362acd5cdca..cdd1b193fd4f 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -655,6 +655,11 @@ static const struct usb_device_id mbim_devs[] = {
 	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 	},
 
+	/* Telit LN920 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
 	/* default entry */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
-- 
2.30.2

[PATCH AUTOSEL 4.14 5/5] ethtool: Fix an error code in cxgb2.c

[Sasha Levin]

From: Yang Li <yang.lee@linux.alibaba.com>

[ Upstream commit 7db8263a12155c7ae4ad97e850f1e499c73765fc ]

When adapter->registered_device_map is NULL, the value of err is
uncertain, we set err to -EINVAL to avoid ambiguity.

Clean up smatch warning:
drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing
error code 'err'

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb/cxgb2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index 8623be13bf86..eef8fa100889 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -1157,6 +1157,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!adapter->registered_device_map) {
 		pr_err("%s: could not register any net devices\n",
 		       pci_name(pdev));
+		err = -EINVAL;
 		goto out_release_adapter_res;
 	}
 
-- 
2.30.2