linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: "Clément Léger" <clement.leger@bootlin.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Claudiu Manoil <claudiu.manoil@nxp.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	"UNGLinuxDriver@microchip.com" <UNGLinuxDriver@microchip.com>,
	Andrew Lunn <andrew@lunn.ch>,
	"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v2 3/6] net: ocelot: pre-compute injection frame header content
Date: Wed, 3 Nov 2021 12:38:12 +0000	[thread overview]
Message-ID: <20211103123811.im5ua7kirogoltm7@skbuf> (raw)
In-Reply-To: <20211103091943.3878621-4-clement.leger@bootlin.com>

On Wed, Nov 03, 2021 at 10:19:40AM +0100, Clément Léger wrote:
> IFH preparation can take quite some time on slow processors (up to 5% in
> a iperf3 test for instance). In order to reduce the cost of this
> preparation, pre-compute IFH since most of the parameters are fixed per
> port. Only rew_op and vlan tag will be set when sending if different
> than 0. This allows to remove entirely the calls to packing() with basic
> usage. In the same time, export this function that will be used by FDMA.
> 
> Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> ---

Honestly, this feels a bit cheap/gimmicky, and not really the
fundamental thing to address. In my testing of a similar idea (see
commits 67c2404922c2 ("net: dsa: felix: create a template for the DSA
tags on xmit") and then 7c4bb540e917 ("net: dsa: tag_ocelot: create
separate tagger for Seville"), the net difference is not that stark,
considering that now you need to access one more memory region which you
did not need before, do a memcpy, and then patch the IFH anyway for the
non-constant stuff.

Certainly, for the calls to ocelot_port_inject_frame() from DSA, I would
prefer not having this pre-computed IFH.

Could you provide some before/after performance numbers and perf counters?

>  drivers/net/ethernet/mscc/ocelot.c | 23 ++++++++++++++++++-----
>  include/soc/mscc/ocelot.h          |  5 +++++
>  2 files changed, 23 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
> index e6c18b598d5c..97693772595b 100644
> --- a/drivers/net/ethernet/mscc/ocelot.c
> +++ b/drivers/net/ethernet/mscc/ocelot.c
> @@ -1076,20 +1076,29 @@ bool ocelot_can_inject(struct ocelot *ocelot, int grp)
>  }
>  EXPORT_SYMBOL(ocelot_can_inject);
>  
> +void ocelot_ifh_port_set(void *ifh, struct ocelot_port *port, u32 rew_op,
> +			 u32 vlan_tag)
> +{
> +	memcpy(ifh, port->ifh, OCELOT_TAG_LEN);
> +
> +	if (vlan_tag)
> +		ocelot_ifh_set_vlan_tci(ifh, vlan_tag);
> +	if (rew_op)
> +		ocelot_ifh_set_rew_op(ifh, rew_op);
> +}
> +EXPORT_SYMBOL(ocelot_ifh_port_set);
> +
>  void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int grp,
>  			      u32 rew_op, struct sk_buff *skb)
>  {
> +	struct ocelot_port *port_s = ocelot->ports[port];
>  	u32 ifh[OCELOT_TAG_LEN / 4] = {0};
>  	unsigned int i, count, last;
>  
>  	ocelot_write_rix(ocelot, QS_INJ_CTRL_GAP_SIZE(1) |
>  			 QS_INJ_CTRL_SOF, QS_INJ_CTRL, grp);
>  
> -	ocelot_ifh_set_bypass(ifh, 1);
> -	ocelot_ifh_set_dest(ifh, BIT_ULL(port));
> -	ocelot_ifh_set_tag_type(ifh, IFH_TAG_TYPE_C);
> -	ocelot_ifh_set_vlan_tci(ifh, skb_vlan_tag_get(skb));
> -	ocelot_ifh_set_rew_op(ifh, rew_op);
> +	ocelot_ifh_port_set(ifh, port_s, rew_op, skb_vlan_tag_get(skb));
>  
>  	for (i = 0; i < OCELOT_TAG_LEN / 4; i++)
>  		ocelot_write_rix(ocelot, ifh[i], QS_INJ_WR, grp);
> @@ -2128,6 +2137,10 @@ void ocelot_init_port(struct ocelot *ocelot, int port)
>  
>  	skb_queue_head_init(&ocelot_port->tx_skbs);
>  
> +	ocelot_ifh_set_bypass(ocelot_port->ifh, 1);
> +	ocelot_ifh_set_dest(ocelot_port->ifh, BIT_ULL(port));
> +	ocelot_ifh_set_tag_type(ocelot_port->ifh, IFH_TAG_TYPE_C);
> +
>  	/* Basic L2 initialization */
>  
>  	/* Set MAC IFG Gaps
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index fef3a36b0210..b3381c90ff3e 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -6,6 +6,7 @@
>  #define _SOC_MSCC_OCELOT_H
>  
>  #include <linux/ptp_clock_kernel.h>
> +#include <linux/dsa/ocelot.h>
>  #include <linux/net_tstamp.h>
>  #include <linux/if_vlan.h>
>  #include <linux/regmap.h>
> @@ -623,6 +624,8 @@ struct ocelot_port {
>  
>  	struct net_device		*bridge;
>  	u8				stp_state;
> +
> +	u8				ifh[OCELOT_TAG_LEN];
>  };
>  
>  struct ocelot {
> @@ -754,6 +757,8 @@ void __ocelot_target_write_ix(struct ocelot *ocelot, enum ocelot_target target,
>  bool ocelot_can_inject(struct ocelot *ocelot, int grp);
>  void ocelot_port_inject_frame(struct ocelot *ocelot, int port, int grp,
>  			      u32 rew_op, struct sk_buff *skb);
> +void ocelot_ifh_port_set(void *ifh, struct ocelot_port *port, u32 rew_op,
> +			 u32 vlan_tag);
>  int ocelot_xtr_poll_frame(struct ocelot *ocelot, int grp, struct sk_buff **skb);
>  void ocelot_drain_cpu_queue(struct ocelot *ocelot, int grp);
>  
> -- 
> 2.33.0
>

  reply	other threads:[~2021-11-03 12:38 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-03  9:19 [PATCH v2 0/6] Add FDMA support on ocelot switch driver Clément Léger
2021-11-03  9:19 ` [PATCH v2 1/6] net: ocelot: add support to get port mac from device-tree Clément Léger
2021-11-03 10:26   ` Vladimir Oltean
2021-11-15 11:19   ` Julian Wiedmann
2021-11-15 11:24     ` Clément Léger
2021-11-03  9:19 ` [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml Clément Léger
2021-11-03 10:45   ` Vladimir Oltean
2021-11-08 11:13     ` Clément Léger
2021-11-12 20:06   ` Rob Herring
2021-11-03  9:19 ` [PATCH v2 3/6] net: ocelot: pre-compute injection frame header content Clément Léger
2021-11-03 12:38   ` Vladimir Oltean [this message]
2021-11-03 13:53     ` Clément Léger
2021-11-15 10:13       ` Clément Léger
2021-11-15 10:51         ` Vladimir Oltean
2021-11-15 10:58           ` Clément Léger
2021-11-15 14:08         ` Jakub Kicinski
2021-11-15 14:06           ` Clément Léger
2021-11-15 14:31             ` Vladimir Oltean
2021-11-15 16:03               ` Clément Léger
2021-11-03  9:19 ` [PATCH v2 4/6] net: ocelot: add support for ndo_change_mtu Clément Léger
2021-11-03 12:40   ` Vladimir Oltean
2021-11-03 13:07     ` Clément Léger
2021-11-03  9:19 ` [PATCH v2 5/6] net: ocelot: add FDMA support Clément Léger
2021-11-03 11:25   ` Denis Kirjanov
2021-11-03 12:31   ` Vladimir Oltean
2021-11-03 14:22     ` Clément Léger
2021-11-03  9:19 ` [PATCH v2 6/6] net: ocelot: add jumbo frame support for FDMA Clément Léger
2021-11-03 12:43   ` Vladimir Oltean
2021-11-03 14:30     ` Clément Léger
2021-11-03 10:46 ` [PATCH v2 0/6] Add FDMA support on ocelot switch driver Denis Kirjanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211103123811.im5ua7kirogoltm7@skbuf \
    --to=vladimir.oltean@nxp.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=claudiu.manoil@nxp.com \
    --cc=clement.leger@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).