From: "Clément Léger" <clement.leger@bootlin.com>
To: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
"UNGLinuxDriver@microchip.com" <UNGLinuxDriver@microchip.com>,
Andrew Lunn <andrew@lunn.ch>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml
Date: Mon, 8 Nov 2021 12:13:12 +0100 [thread overview]
Message-ID: <20211108121312.2dd46ec8@fixe.home> (raw)
In-Reply-To: <20211103104511.sgynsapyqlsamovi@skbuf>
Le Wed, 3 Nov 2021 10:45:12 +0000,
Vladimir Oltean <vladimir.oltean@nxp.com> a écrit :
> On Wed, Nov 03, 2021 at 10:19:39AM +0100, Clément Léger wrote:
> > Convert existing bindings to yaml format. In the same time, remove non
> > exiting properties ("inj" interrupt) and add fdma.
> >
> > Signed-off-by: Clément Léger <clement.leger@bootlin.com>
> > ---
> > .../bindings/net/mscc,vsc7514-switch.yaml | 184 ++++++++++++++++++
> > .../devicetree/bindings/net/mscc-ocelot.txt | 83 --------
> > 2 files changed, 184 insertions(+), 83 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> > delete mode 100644 Documentation/devicetree/bindings/net/mscc-ocelot.txt
> >
> > diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> > new file mode 100644
> > index 000000000000..0c96eabf9d2d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> > @@ -0,0 +1,184 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml
> > +$schema: http://devicetree.org/meta-schemas/core.yaml
> > +
> > +title: Microchip VSC7514 Ethernet switch controller
> > +
> > +maintainers:
> > + - Vladimir Oltean <vladimir.oltean@nxp.com>
> > + - Claudiu Manoil <claudiu.manoil@nxp.com>
> > + - Alexandre Belloni <alexandre.belloni@bootlin.com>
> > +
> > +description: |
> > + The VSC7514 Industrial IoT Ethernet switch contains four integrated dual media
> > + 10/100/1000BASE-T PHYs, two 1G SGMII/SerDes, two 1G/2.5G SGMII/SerDes, and an
> > + option for either a 1G/2.5G SGMII/SerDes Node Processor Interface (NPI) or a
> > + PCIe interface for external CPU connectivity. The NPI/PCIe can operate as a
> > + standard Ethernet port.
>
> Technically any port can serve as NPI, not just the SERDES ones. People
> are even using internal PHY ports as NPI.
> https://patchwork.kernel.org/project/netdevbpf/patch/20210814025003.2449143-11-colin.foster@in-advantage.com/#24381029
>
> Honestly I would not bother talking about NPI, it is confusing to see it here.
> Anything having to do with the NPI port is the realm of DSA.
>
> Just say how the present driver expects to control the device, don't
> just copy stuff from marketing slides. In this case PCIe is irrelevant
> too, this driver is for a platform device, and it only runs on the
> embedded processor as far as I can tell.
>
Ack
> > +
> > + The device provides a rich set of Industrial Ethernet switching features such
> > + as fast protection switching, 1588 precision time protocol, and synchronous
> > + Ethernet. Advanced TCAM-based VLAN and QoS processing enable delivery of
> > + differentiated services. Security is assured through frame processing using
> > + Microsemi’s TCAM-based Versatile Content Aware Processor.
>
> Above you say Microchip, and here you say Microsemi.
>
> > +
> > + In addition, the device contains a powerful 500 MHz CPU enabling full
> > + management of the switch.
>
> ~powerful~
>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "^switch@[0-9a-f]+$"
> > +
> > + compatible:
> > + const: mscc,vsc7514-switch
> > +
> > + reg:
> > + items:
> > + - description: system target
> > + - description: rewriter target
> > + - description: qs target
> > + - description: PTP target
> > + - description: Port0 target
> > + - description: Port1 target
> > + - description: Port2 target
> > + - description: Port3 target
> > + - description: Port4 target
> > + - description: Port5 target
> > + - description: Port6 target
> > + - description: Port7 target
> > + - description: Port8 target
> > + - description: Port9 target
> > + - description: Port10 target
> > + - description: QSystem target
> > + - description: Analyzer target
> > + - description: S0 target
> > + - description: S1 target
> > + - description: S2 target
> > + - description: fdma target
> > +
> > + reg-names:
> > + items:
> > + - const: sys
> > + - const: rew
> > + - const: qs
> > + - const: ptp
> > + - const: port0
> > + - const: port1
> > + - const: port2
> > + - const: port3
> > + - const: port4
> > + - const: port5
> > + - const: port6
> > + - const: port7
> > + - const: port8
> > + - const: port9
> > + - const: port10
> > + - const: qsys
> > + - const: ana
> > + - const: s0
> > + - const: s1
> > + - const: s2
> > + - const: fdma
> > +
> > + interrupts:
> > + minItems: 1
> > + items:
> > + - description: PTP ready
> > + - description: register based extraction
> > + - description: frame dma based extraction
> > +
> > + interrupt-names:
> > + minItems: 1
> > + items:
> > + - const: ptp_rdy
> > + - const: xtr
> > + - const: fdma
> > +
> > + ethernet-ports:
> > + type: object
> > + patternProperties:
> > + "^port@[0-9a-f]+$":
> > + type: object
> > + description: Ethernet ports handled by the switch
> > +
> > + allOf:
> > + - $ref: ethernet-controller.yaml#
>
> I'm pretty sure Rob will comment that this can be simplified to:
>
> $ref: ethernet-controller.yaml#
>
> without the allOf: and "-".
Ok
>
> > +
> > + properties:
> > + '#address-cells':
> > + const: 1
> > + '#size-cells':
> > + const: 0
> > +
> > + reg:
> > + description: Switch port number
> > +
> > + phy-handle: true
> > +
> > + mac-address: true
> > +
> > + required:
> > + - reg
> > + - phy-handle
>
> Shouldn't there be additionalProperties: false for the port node as well?
>
> And actually, phy-handle is not strictly required, if you have a
> fixed-link. I think you should use oneOf.
Ok
>
> And you know what else is required? phy-mode. See commits e6e12df625f2
> ("net: mscc: ocelot: convert to phylink") and eba54cbb92d2 ("MIPS: mscc:
> ocelot: mark the phy-mode for internal PHY ports").
Ok, so I guess the binding text file was not updated back then. I'll fix
that.
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > + - interrupts
> > + - interrupt-names
> > + - ethernet-ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + switch@1010000 {
> > + compatible = "mscc,vsc7514-switch";
> > + reg = <0x1010000 0x10000>,
> > + <0x1030000 0x10000>,
> > + <0x1080000 0x100>,
> > + <0x10e0000 0x10000>,
> > + <0x11e0000 0x100>,
> > + <0x11f0000 0x100>,
> > + <0x1200000 0x100>,
> > + <0x1210000 0x100>,
> > + <0x1220000 0x100>,
> > + <0x1230000 0x100>,
> > + <0x1240000 0x100>,
> > + <0x1250000 0x100>,
> > + <0x1260000 0x100>,
> > + <0x1270000 0x100>,
> > + <0x1280000 0x100>,
> > + <0x1800000 0x80000>,
> > + <0x1880000 0x10000>,
> > + <0x1040000 0x10000>,
> > + <0x1050000 0x10000>,
> > + <0x1060000 0x10000>,
> > + <0x1a0 0x1c4>;
> > + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> > + "port2", "port3", "port4", "port5", "port6",
> > + "port7", "port8", "port9", "port10", "qsys",
> > + "ana", "s0", "s1", "s2", "fdma";
> > + interrupts = <18 21 16>;
> > + interrupt-names = "ptp_rdy", "xtr", "fdma";
> > +
> > + ethernet-ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port0: port@0 {
> > + reg = <0>;
> > + phy-handle = <&phy0>;
> > + };
> > + port1: port@1 {
> > + reg = <1>;
> > + phy-handle = <&phy1>;
> > + };
> > + };
> > + };
> > +
> > +...
> > +# vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
> > diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> > deleted file mode 100644
> > index 3b6290b45ce5..000000000000
> > --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
> > +++ /dev/null
> > @@ -1,83 +0,0 @@
> > -Microsemi Ocelot network Switch
> > -===============================
> > -
> > -The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
> > -VSC7514)
> > -
> > -Required properties:
> > -- compatible: Should be "mscc,vsc7514-switch"
> > -- reg: Must contain an (offset, length) pair of the register set for each
> > - entry in reg-names.
> > -- reg-names: Must include the following entries:
> > - - "sys"
> > - - "rew"
> > - - "qs"
> > - - "ptp" (optional due to backward compatibility)
> > - - "qsys"
> > - - "ana"
> > - - "portX" with X from 0 to the number of last port index available on that
> > - switch
> > -- interrupts: Should contain the switch interrupts for frame extraction,
> > - frame injection and PTP ready.
> > -- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
> > - "ptp_rdy" which is optional due to backward compatibility.
> > -- ethernet-ports: A container for child nodes representing switch ports.
> > -
> > -The ethernet-ports container has the following properties
> > -
> > -Required properties:
> > -
> > -- #address-cells: Must be 1
> > -- #size-cells: Must be 0
> > -
> > -Each port node must have the following mandatory properties:
> > -- reg: Describes the port address in the switch
> > -
> > -Port nodes may also contain the following optional standardised
> > -properties, described in binding documents:
> > -
> > -- phy-handle: Phandle to a PHY on an MDIO bus. See
> > - Documentation/devicetree/bindings/net/ethernet.txt for details.
> > -
> > -Example:
> > -
> > - switch@1010000 {
> > - compatible = "mscc,vsc7514-switch";
> > - reg = <0x1010000 0x10000>,
> > - <0x1030000 0x10000>,
> > - <0x1080000 0x100>,
> > - <0x10e0000 0x10000>,
> > - <0x11e0000 0x100>,
> > - <0x11f0000 0x100>,
> > - <0x1200000 0x100>,
> > - <0x1210000 0x100>,
> > - <0x1220000 0x100>,
> > - <0x1230000 0x100>,
> > - <0x1240000 0x100>,
> > - <0x1250000 0x100>,
> > - <0x1260000 0x100>,
> > - <0x1270000 0x100>,
> > - <0x1280000 0x100>,
> > - <0x1800000 0x80000>,
> > - <0x1880000 0x10000>;
> > - reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> > - "port2", "port3", "port4", "port5", "port6",
> > - "port7", "port8", "port9", "port10", "qsys",
> > - "ana";
> > - interrupts = <18 21 22>;
> > - interrupt-names = "ptp_rdy", "xtr", "inj";
> > -
> > - ethernet-ports {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - port0: port@0 {
> > - reg = <0>;
> > - phy-handle = <&phy0>;
> > - };
> > - port1: port@1 {
> > - reg = <1>;
> > - phy-handle = <&phy1>;
> > - };
> > - };
> > - };
> > --
> > 2.33.0
>
--
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com
next prev parent reply other threads:[~2021-11-08 11:13 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 9:19 [PATCH v2 0/6] Add FDMA support on ocelot switch driver Clément Léger
2021-11-03 9:19 ` [PATCH v2 1/6] net: ocelot: add support to get port mac from device-tree Clément Léger
2021-11-03 10:26 ` Vladimir Oltean
2021-11-15 11:19 ` Julian Wiedmann
2021-11-15 11:24 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 2/6] dt-bindings: net: convert mscc,vsc7514-switch bindings to yaml Clément Léger
2021-11-03 10:45 ` Vladimir Oltean
2021-11-08 11:13 ` Clément Léger [this message]
2021-11-12 20:06 ` Rob Herring
2021-11-03 9:19 ` [PATCH v2 3/6] net: ocelot: pre-compute injection frame header content Clément Léger
2021-11-03 12:38 ` Vladimir Oltean
2021-11-03 13:53 ` Clément Léger
2021-11-15 10:13 ` Clément Léger
2021-11-15 10:51 ` Vladimir Oltean
2021-11-15 10:58 ` Clément Léger
2021-11-15 14:08 ` Jakub Kicinski
2021-11-15 14:06 ` Clément Léger
2021-11-15 14:31 ` Vladimir Oltean
2021-11-15 16:03 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 4/6] net: ocelot: add support for ndo_change_mtu Clément Léger
2021-11-03 12:40 ` Vladimir Oltean
2021-11-03 13:07 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 5/6] net: ocelot: add FDMA support Clément Léger
2021-11-03 11:25 ` Denis Kirjanov
2021-11-03 12:31 ` Vladimir Oltean
2021-11-03 14:22 ` Clément Léger
2021-11-03 9:19 ` [PATCH v2 6/6] net: ocelot: add jumbo frame support for FDMA Clément Léger
2021-11-03 12:43 ` Vladimir Oltean
2021-11-03 14:30 ` Clément Léger
2021-11-03 10:46 ` [PATCH v2 0/6] Add FDMA support on ocelot switch driver Denis Kirjanov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211108121312.2dd46ec8@fixe.home \
--to=clement.leger@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).