[PATCH 5.15 00/26] 5.15.2-rc1 review

[PATCH 5.15 00/26] 5.15.2-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.2 release.
There are 26 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.2-rc1

Johan Hovold <johan@kernel.org>
    rsi: fix control-message timeout

Gustavo A. R. Silva <gustavoars@kernel.org>
    media: staging/intel-ipu3: css: Fix wrong size comparison imgu_css_fw_init

Martin Kaiser <martin@kaiser.cx>
    staging: r8188eu: fix memleak in rtw_wx_set_enc_ext

Johan Hovold <johan@kernel.org>
    staging: rtl8192u: fix control-message timeouts

Johan Hovold <johan@kernel.org>
    staging: r8712u: fix control-message timeout

Johan Hovold <johan@kernel.org>
    comedi: vmk80xx: fix bulk and interrupt message timeouts

Johan Hovold <johan@kernel.org>
    comedi: vmk80xx: fix bulk-buffer overflow

Johan Hovold <johan@kernel.org>
    comedi: vmk80xx: fix transfer-buffer overflows

Johan Hovold <johan@kernel.org>
    comedi: ni_usb6501: fix NULL-deref in command paths

Johan Hovold <johan@kernel.org>
    comedi: dt9812: fix DMA buffers on stack

Jan Kara <jack@suse.cz>
    isofs: Fix out of bound access for corrupted isofs image

Pavel Skripkin <paskripkin@gmail.com>
    staging: rtl8712: fix use-after-free in rtl8712_dl_fw

Linus Torvalds <torvalds@linux-foundation.org>
    btrfs: fix lzo_decompress_bio() kmap leakage

Marco Elver <elver@google.com>
    kfence: default to dynamic branch instead of static keys mode

Marco Elver <elver@google.com>
    kfence: always use static branches to guard kfence_alloc()

Todd Kjos <tkjos@google.com>
    binder: don't detect sender/target during buffer cleanup

Todd Kjos <tkjos@google.com>
    binder: use cred instead of task for getsecid

Todd Kjos <tkjos@google.com>
    binder: use cred instead of task for selinux checks

Todd Kjos <tkjos@google.com>
    binder: use euid from cred instead of using task

Kees Cook <keescook@chromium.org>
    Revert "proc/wchan: use printk format instead of lookup_symbol_name()"

James Buren <braewoods+lkml@braewoods.net>
    usb-storage: Add compatibility quirk flags for iODD 2531/2541

Viraj Shah <viraj.shah@linutronix.de>
    usb: musb: Balance list entry in musb_gadget_queue

Geert Uytterhoeven <geert@linux-m68k.org>
    usb: gadget: Mark USB_FSL_QE broken on 64-bit

Neal Liu <neal_liu@aspeedtech.com>
    usb: ehci: handshake CMD_RUN instead of STS_HALT

Juergen Gross <jgross@suse.com>
    Revert "x86/kvm: fix vcpu-id indexed array sizes"

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: avoid warning with -Wbitwise-instead-of-logical


-------------

Diffstat:

 Documentation/dev-tools/kfence.rst           |  12 ++-
 Makefile                                     |   4 +-
 arch/x86/kvm/ioapic.c                        |   2 +-
 arch/x86/kvm/ioapic.h                        |   4 +-
 arch/x86/kvm/mmu/spte.h                      |   7 +-
 drivers/android/binder.c                     |  41 ++++------
 drivers/android/binder_internal.h            |   4 +
 drivers/comedi/drivers/dt9812.c              | 115 ++++++++++++++++++++-------
 drivers/comedi/drivers/ni_usb6501.c          |  10 +++
 drivers/comedi/drivers/vmk80xx.c             |  28 ++++---
 drivers/net/wireless/rsi/rsi_91x_usb.c       |   2 +-
 drivers/staging/media/ipu3/ipu3-css-fw.c     |   7 +-
 drivers/staging/media/ipu3/ipu3-css-fw.h     |   2 +-
 drivers/staging/r8188eu/os_dep/ioctl_linux.c |   5 +-
 drivers/staging/rtl8192u/r8192U_core.c       |  18 ++---
 drivers/staging/rtl8712/usb_intf.c           |   4 +-
 drivers/staging/rtl8712/usb_ops_linux.c      |   2 +-
 drivers/usb/gadget/udc/Kconfig               |   1 +
 drivers/usb/host/ehci-hcd.c                  |  11 ++-
 drivers/usb/host/ehci-platform.c             |   6 ++
 drivers/usb/host/ehci.h                      |   1 +
 drivers/usb/musb/musb_gadget.c               |   4 +-
 drivers/usb/storage/unusual_devs.h           |  10 +++
 fs/btrfs/lzo.c                               |   3 +-
 fs/isofs/inode.c                             |   2 +
 fs/proc/base.c                               |  19 +++--
 include/linux/kfence.h                       |  21 ++---
 include/linux/lsm_hook_defs.h                |  14 ++--
 include/linux/lsm_hooks.h                    |  14 ++--
 include/linux/security.h                     |  33 ++++----
 lib/Kconfig.kfence                           |  26 +++---
 mm/kfence/core.c                             |  16 ++--
 security/security.c                          |  14 ++--
 security/selinux/hooks.c                     |  48 +++--------
 34 files changed, 298 insertions(+), 212 deletions(-)

[PATCH 5.15 01/26] KVM: x86: avoid warning with -Wbitwise-instead-of-logical

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 3d5e7a28b1ea2d603dea478e58e37ce75b9597ab upstream.

This is a new warning in clang top-of-tree (will be clang 14):

In file included from arch/x86/kvm/mmu/mmu.c:27:
arch/x86/kvm/mmu/spte.h:318:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        return __is_bad_mt_xwr(rsvd_check, spte) |
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                 ||
arch/x86/kvm/mmu/spte.h:318:9: note: cast one or both operands to int to silence this warning

The code is fine, but change it anyway to shut up this clever clogs
of a compiler.

Reported-by: torvic9@mailbox.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/mmu/spte.h |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/arch/x86/kvm/mmu/spte.h
+++ b/arch/x86/kvm/mmu/spte.h
@@ -310,12 +310,7 @@ static inline bool __is_bad_mt_xwr(struc
 static __always_inline bool is_rsvd_spte(struct rsvd_bits_validate *rsvd_check,
 					 u64 spte, int level)
 {
-	/*
-	 * Use a bitwise-OR instead of a logical-OR to aggregate the reserved
-	 * bits and EPT's invalid memtype/XWR checks to avoid an extra Jcc
-	 * (this is extremely unlikely to be short-circuited as true).
-	 */
-	return __is_bad_mt_xwr(rsvd_check, spte) |
+	return __is_bad_mt_xwr(rsvd_check, spte) ||
 	       __is_rsvd_bits_set(rsvd_check, spte, level);
 }
 

[PATCH 5.15 02/26] Revert "x86/kvm: fix vcpu-id indexed array sizes"

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

commit 1e254d0d86a0f2efd4190a89d5204b37c18c6381 upstream.

This reverts commit 76b4f357d0e7d8f6f0013c733e6cba1773c266d3.

The commit has the wrong reasoning, as KVM_MAX_VCPU_ID is not defining the
maximum allowed vcpu-id as its name suggests, but the number of vcpu-ids.
So revert this patch again.

Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-2-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/ioapic.c |    2 +-
 arch/x86/kvm/ioapic.h |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/arch/x86/kvm/ioapic.c
+++ b/arch/x86/kvm/ioapic.c
@@ -96,7 +96,7 @@ static unsigned long ioapic_read_indirec
 static void rtc_irq_eoi_tracking_reset(struct kvm_ioapic *ioapic)
 {
 	ioapic->rtc_status.pending_eoi = 0;
-	bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID + 1);
+	bitmap_zero(ioapic->rtc_status.dest_map.map, KVM_MAX_VCPU_ID);
 }
 
 static void kvm_rtc_eoi_tracking_restore_all(struct kvm_ioapic *ioapic);
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -39,13 +39,13 @@ struct kvm_vcpu;
 
 struct dest_map {
 	/* vcpu bitmap where IRQ has been sent */
-	DECLARE_BITMAP(map, KVM_MAX_VCPU_ID + 1);
+	DECLARE_BITMAP(map, KVM_MAX_VCPU_ID);
 
 	/*
 	 * Vector sent to a given vcpu, only valid when
 	 * the vcpu's bit in map is set
 	 */
-	u8 vectors[KVM_MAX_VCPU_ID + 1];
+	u8 vectors[KVM_MAX_VCPU_ID];
 };
 
 

[PATCH 5.15 03/26] usb: ehci: handshake CMD_RUN instead of STS_HALT

[Greg Kroah-Hartman]

From: Neal Liu <neal_liu@aspeedtech.com>

commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream.

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com
Cc: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/ehci-hcd.c      |   11 ++++++++++-
 drivers/usb/host/ehci-platform.c |    6 ++++++
 drivers/usb/host/ehci.h          |    1 +
 3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -635,7 +635,16 @@ static int ehci_run (struct usb_hcd *hcd
 	/* Wait until HC become operational */
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
-	rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
 
 	up_write(&ehci_cf_port_reset_rwsem);
 
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -297,6 +297,12 @@ static int ehci_platform_probe(struct pl
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
 		if (soc_device_match(quirk_poll_match))
 			priv->quirk_poll = true;
 
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controlle
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)

[PATCH 5.15 04/26] usb: gadget: Mark USB_FSL_QE broken on 64-bit

[Greg Kroah-Hartman]

From: Geert Uytterhoeven <geert@linux-m68k.org>

commit a0548b26901f082684ad1fb3ba397d2de3a1406a upstream.

On 64-bit:

    drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep0_rx’:
    drivers/usb/gadget/udc/fsl_qe_udc.c:842:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
      842 |     vaddr = (u32)phys_to_virt(in_be32(&bd->buf));
	  |             ^
    In file included from drivers/usb/gadget/udc/fsl_qe_udc.c:41:
    drivers/usb/gadget/udc/fsl_qe_udc.c:843:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
      843 |     frame_set_data(pframe, (u8 *)vaddr);
	  |                            ^

The driver assumes physical and virtual addresses are 32-bit, hence it
cannot work on 64-bit platforms.

Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211027080849.3276289-1-geert@linux-m68k.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 8c614bb86c66..69394dc1cdfb 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -330,6 +330,7 @@ config USB_AMD5536UDC
 config USB_FSL_QE
 	tristate "Freescale QE/CPM USB Device Controller"
 	depends on FSL_SOC && (QUICC_ENGINE || CPM)
+	depends on !64BIT || BROKEN
 	help
 	   Some of Freescale PowerPC processors have a Full Speed
 	   QE/CPM2 USB controller, which support device mode with 4
-- 
2.33.1

[PATCH 5.15 05/26] usb: musb: Balance list entry in musb_gadget_queue

[Greg Kroah-Hartman]

From: Viraj Shah <viraj.shah@linutronix.de>

commit 21b5fcdccb32ff09b6b63d4a83c037150665a83f upstream.

musb_gadget_queue() adds the passed request to musb_ep::req_list. If the
endpoint is idle and it is the first request then it invokes
musb_queue_resume_work(). If the function returns an error then the
error is passed to the caller without any clean-up and the request
remains enqueued on the list. If the caller enqueues the request again
then the list corrupts.

Remove the request from the list on error.

Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Viraj Shah <viraj.shah@linutronix.de>
Link: https://lore.kernel.org/r/20211021093644.4734-1-viraj.shah@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/musb/musb_gadget.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1247,9 +1247,11 @@ static int musb_gadget_queue(struct usb_
 		status = musb_queue_resume_work(musb,
 						musb_ep_restart_resume_work,
 						request);
-		if (status < 0)
+		if (status < 0) {
 			dev_err(musb->controller, "%s resume work: %i\n",
 				__func__, status);
+			list_del(&request->list);
+		}
 	}
 
 unlock:

[PATCH 5.15 06/26] usb-storage: Add compatibility quirk flags for iODD 2531/2541

[Greg Kroah-Hartman]

From: James Buren <braewoods+lkml@braewoods.net>

commit 05c8f1b67e67dcd786ae3fe44492bbc617b4bd12 upstream.

These drive enclosures have firmware bugs that make it impossible to mount
a new virtual ISO image after Linux ejects the old one if the device is
locked by Linux. Windows bypasses this problem by the fact that they do
not lock the device. Add a quirk to disable device locking for these
drive enclosures.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Buren <braewoods+lkml@braewoods.net>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211014015504.2695089-1-braewoods+lkml@braewoods.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/unusual_devs.h |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -407,6 +407,16 @@ UNUSUAL_DEV(  0x04b8, 0x0602, 0x0110, 0x
 		USB_SC_SCSI, USB_PR_BULK, NULL, US_FL_SINGLE_LUN),
 
 /*
+ * Reported by James Buren <braewoods+lkml@braewoods.net>
+ * Virtual ISOs cannot be remounted if ejected while the device is locked
+ * Disable locking to mimic Windows behavior that bypasses the issue
+ */
+UNUSUAL_DEV(  0x04c5, 0x2028, 0x0001, 0x0001,
+		"iODD",
+		"2531/2541",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE),
+
+/*
  * Not sure who reported this originally but
  * Pavel Machek <pavel@ucw.cz> reported that the extra US_FL_SINGLE_LUN
  * flag be added */

[PATCH 5.15 07/26] Revert "proc/wchan: use printk format instead of lookup_symbol_name()"

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit 54354c6a9f7fd5572d2b9ec108117c4f376d4d23 upstream.

This reverts commit 152c432b128cb043fc107e8f211195fe94b2159c.

When a kernel address couldn't be symbolized for /proc/$pid/wchan, it
would leak the raw value, a potential information exposure. This is a
regression compared to the safer pre-v5.12 behavior.

Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Vito Caputo <vcaputo@pengaru.com>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211008111626.090829198@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/proc/base.c |   21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -67,6 +67,7 @@
 #include <linux/mm.h>
 #include <linux/swap.h>
 #include <linux/rcupdate.h>
+#include <linux/kallsyms.h>
 #include <linux/stacktrace.h>
 #include <linux/resource.h>
 #include <linux/module.h>
@@ -386,17 +387,19 @@ static int proc_pid_wchan(struct seq_fil
 			  struct pid *pid, struct task_struct *task)
 {
 	unsigned long wchan;
+	char symname[KSYM_NAME_LEN];
 
-	if (ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
-		wchan = get_wchan(task);
-	else
-		wchan = 0;
-
-	if (wchan)
-		seq_printf(m, "%ps", (void *) wchan);
-	else
-		seq_putc(m, '0');
+	if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS))
+		goto print0;
 
+	wchan = get_wchan(task);
+	if (wchan && !lookup_symbol_name(wchan, symname)) {
+		seq_puts(m, symname);
+		return 0;
+	}
+
+print0:
+	seq_putc(m, '0');
 	return 0;
 }
 #endif /* CONFIG_KALLSYMS */

[PATCH 5.15 08/26] binder: use euid from cred instead of using task

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 29bc22ac5e5bc63275e850f0c8fc549e3d0e306b upstream.

Save the 'struct cred' associated with a binder process
at initial open to avoid potential race conditions
when converting to an euid.

Set a transaction's sender_euid from the 'struct cred'
saved at binder_open() instead of looking up the euid
from the binder proc's 'struct task'. This ensures
the euid is associated with the security context that
of the task that opened binder.

Cc: stable@vger.kernel.org # 4.4+
Fixes: 457b9a6f09f0 ("Staging: android: add binder driver")
Signed-off-by: Todd Kjos <tkjos@google.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Jann Horn <jannh@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c          |    4 +++-
 drivers/android/binder_internal.h |    4 ++++
 2 files changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2711,7 +2711,7 @@ static void binder_transaction(struct bi
 		t->from = thread;
 	else
 		t->from = NULL;
-	t->sender_euid = task_euid(proc->tsk);
+	t->sender_euid = proc->cred->euid;
 	t->to_proc = target_proc;
 	t->to_thread = target_thread;
 	t->code = tr->code;
@@ -4353,6 +4353,7 @@ static void binder_free_proc(struct bind
 	}
 	binder_alloc_deferred_release(&proc->alloc);
 	put_task_struct(proc->tsk);
+	put_cred(proc->cred);
 	binder_stats_deleted(BINDER_STAT_PROC);
 	kfree(proc);
 }
@@ -5055,6 +5056,7 @@ static int binder_open(struct inode *nod
 	spin_lock_init(&proc->outer_lock);
 	get_task_struct(current->group_leader);
 	proc->tsk = current->group_leader;
+	proc->cred = get_cred(filp->f_cred);
 	INIT_LIST_HEAD(&proc->todo);
 	init_waitqueue_head(&proc->freeze_wait);
 	proc->default_priority = task_nice(current);
--- a/drivers/android/binder_internal.h
+++ b/drivers/android/binder_internal.h
@@ -364,6 +364,9 @@ struct binder_ref {
  *                        (invariant after initialized)
  * @tsk                   task_struct for group_leader of process
  *                        (invariant after initialized)
+ * @cred                  struct cred associated with the `struct file`
+ *                        in binder_open()
+ *                        (invariant after initialized)
  * @deferred_work_node:   element for binder_deferred_list
  *                        (protected by binder_deferred_lock)
  * @deferred_work:        bitmap of deferred work to perform
@@ -426,6 +429,7 @@ struct binder_proc {
 	struct list_head waiting_threads;
 	int pid;
 	struct task_struct *tsk;
+	const struct cred *cred;
 	struct hlist_node deferred_work_node;
 	int deferred_work;
 	int outstanding_txns;

[PATCH 5.15 09/26] binder: use cred instead of task for selinux checks

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 52f88693378a58094c538662ba652aff0253c4fe upstream.

Since binder was integrated with selinux, it has passed
'struct task_struct' associated with the binder_proc
to represent the source and target of transactions.
The conversion of task to SID was then done in the hook
implementations. It turns out that there are race conditions
which can result in an incorrect security context being used.

Fix by using the 'struct cred' saved during binder_open and pass
it to the selinux subsystem.

Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables)
Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c      |   12 +++++-----
 include/linux/lsm_hook_defs.h |   14 ++++++------
 include/linux/lsm_hooks.h     |   14 ++++++------
 include/linux/security.h      |   28 ++++++++++++------------
 security/security.c           |   14 ++++++------
 security/selinux/hooks.c      |   48 +++++++++++-------------------------------
 6 files changed, 54 insertions(+), 76 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2056,7 +2056,7 @@ static int binder_translate_binder(struc
 		ret = -EINVAL;
 		goto done;
 	}
-	if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) {
+	if (security_binder_transfer_binder(proc->cred, target_proc->cred)) {
 		ret = -EPERM;
 		goto done;
 	}
@@ -2102,7 +2102,7 @@ static int binder_translate_handle(struc
 				  proc->pid, thread->pid, fp->handle);
 		return -EINVAL;
 	}
-	if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) {
+	if (security_binder_transfer_binder(proc->cred, target_proc->cred)) {
 		ret = -EPERM;
 		goto done;
 	}
@@ -2190,7 +2190,7 @@ static int binder_translate_fd(u32 fd, b
 		ret = -EBADF;
 		goto err_fget;
 	}
-	ret = security_binder_transfer_file(proc->tsk, target_proc->tsk, file);
+	ret = security_binder_transfer_file(proc->cred, target_proc->cred, file);
 	if (ret < 0) {
 		ret = -EPERM;
 		goto err_security;
@@ -2595,8 +2595,8 @@ static void binder_transaction(struct bi
 			return_error_line = __LINE__;
 			goto err_invalid_target_handle;
 		}
-		if (security_binder_transaction(proc->tsk,
-						target_proc->tsk) < 0) {
+		if (security_binder_transaction(proc->cred,
+						target_proc->cred) < 0) {
 			return_error = BR_FAILED_REPLY;
 			return_error_param = -EPERM;
 			return_error_line = __LINE__;
@@ -4565,7 +4565,7 @@ static int binder_ioctl_set_ctx_mgr(stru
 		ret = -EBUSY;
 		goto out;
 	}
-	ret = security_binder_set_context_mgr(proc->tsk);
+	ret = security_binder_set_context_mgr(proc->cred);
 	if (ret < 0)
 		goto out;
 	if (uid_valid(context->binder_context_mgr_uid)) {
--- a/include/linux/lsm_hook_defs.h
+++ b/include/linux/lsm_hook_defs.h
@@ -26,13 +26,13 @@
  *   #undef LSM_HOOK
  * };
  */
-LSM_HOOK(int, 0, binder_set_context_mgr, struct task_struct *mgr)
-LSM_HOOK(int, 0, binder_transaction, struct task_struct *from,
-	 struct task_struct *to)
-LSM_HOOK(int, 0, binder_transfer_binder, struct task_struct *from,
-	 struct task_struct *to)
-LSM_HOOK(int, 0, binder_transfer_file, struct task_struct *from,
-	 struct task_struct *to, struct file *file)
+LSM_HOOK(int, 0, binder_set_context_mgr, const struct cred *mgr)
+LSM_HOOK(int, 0, binder_transaction, const struct cred *from,
+	 const struct cred *to)
+LSM_HOOK(int, 0, binder_transfer_binder, const struct cred *from,
+	 const struct cred *to)
+LSM_HOOK(int, 0, binder_transfer_file, const struct cred *from,
+	 const struct cred *to, struct file *file)
 LSM_HOOK(int, 0, ptrace_access_check, struct task_struct *child,
 	 unsigned int mode)
 LSM_HOOK(int, 0, ptrace_traceme, struct task_struct *parent)
--- a/include/linux/lsm_hooks.h
+++ b/include/linux/lsm_hooks.h
@@ -1313,22 +1313,22 @@
  *
  * @binder_set_context_mgr:
  *	Check whether @mgr is allowed to be the binder context manager.
- *	@mgr contains the task_struct for the task being registered.
+ *	@mgr contains the struct cred for the current binder process.
  *	Return 0 if permission is granted.
  * @binder_transaction:
  *	Check whether @from is allowed to invoke a binder transaction call
  *	to @to.
- *	@from contains the task_struct for the sending task.
- *	@to contains the task_struct for the receiving task.
+ *	@from contains the struct cred for the sending process.
+ *	@to contains the struct cred for the receiving process.
  * @binder_transfer_binder:
  *	Check whether @from is allowed to transfer a binder reference to @to.
- *	@from contains the task_struct for the sending task.
- *	@to contains the task_struct for the receiving task.
+ *	@from contains the struct cred for the sending process.
+ *	@to contains the struct cred for the receiving process.
  * @binder_transfer_file:
  *	Check whether @from is allowed to transfer @file to @to.
- *	@from contains the task_struct for the sending task.
+ *	@from contains the struct cred for the sending process.
  *	@file contains the struct file being transferred.
- *	@to contains the task_struct for the receiving task.
+ *	@to contains the struct cred for the receiving process.
  *
  * @ptrace_access_check:
  *	Check permission before allowing the current process to trace the
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -258,13 +258,13 @@ extern int security_init(void);
 extern int early_security_init(void);
 
 /* Security operations */
-int security_binder_set_context_mgr(struct task_struct *mgr);
-int security_binder_transaction(struct task_struct *from,
-				struct task_struct *to);
-int security_binder_transfer_binder(struct task_struct *from,
-				    struct task_struct *to);
-int security_binder_transfer_file(struct task_struct *from,
-				  struct task_struct *to, struct file *file);
+int security_binder_set_context_mgr(const struct cred *mgr);
+int security_binder_transaction(const struct cred *from,
+				const struct cred *to);
+int security_binder_transfer_binder(const struct cred *from,
+				    const struct cred *to);
+int security_binder_transfer_file(const struct cred *from,
+				  const struct cred *to, struct file *file);
 int security_ptrace_access_check(struct task_struct *child, unsigned int mode);
 int security_ptrace_traceme(struct task_struct *parent);
 int security_capget(struct task_struct *target,
@@ -508,25 +508,25 @@ static inline int early_security_init(vo
 	return 0;
 }
 
-static inline int security_binder_set_context_mgr(struct task_struct *mgr)
+static inline int security_binder_set_context_mgr(const struct cred *mgr)
 {
 	return 0;
 }
 
-static inline int security_binder_transaction(struct task_struct *from,
-					      struct task_struct *to)
+static inline int security_binder_transaction(const struct cred *from,
+					      const struct cred *to)
 {
 	return 0;
 }
 
-static inline int security_binder_transfer_binder(struct task_struct *from,
-						  struct task_struct *to)
+static inline int security_binder_transfer_binder(const struct cred *from,
+						  const struct cred *to)
 {
 	return 0;
 }
 
-static inline int security_binder_transfer_file(struct task_struct *from,
-						struct task_struct *to,
+static inline int security_binder_transfer_file(const struct cred *from,
+						const struct cred *to,
 						struct file *file)
 {
 	return 0;
--- a/security/security.c
+++ b/security/security.c
@@ -747,25 +747,25 @@ static int lsm_superblock_alloc(struct s
 
 /* Security operations */
 
-int security_binder_set_context_mgr(struct task_struct *mgr)
+int security_binder_set_context_mgr(const struct cred *mgr)
 {
 	return call_int_hook(binder_set_context_mgr, 0, mgr);
 }
 
-int security_binder_transaction(struct task_struct *from,
-				struct task_struct *to)
+int security_binder_transaction(const struct cred *from,
+				const struct cred *to)
 {
 	return call_int_hook(binder_transaction, 0, from, to);
 }
 
-int security_binder_transfer_binder(struct task_struct *from,
-				    struct task_struct *to)
+int security_binder_transfer_binder(const struct cred *from,
+				    const struct cred *to)
 {
 	return call_int_hook(binder_transfer_binder, 0, from, to);
 }
 
-int security_binder_transfer_file(struct task_struct *from,
-				  struct task_struct *to, struct file *file)
+int security_binder_transfer_file(const struct cred *from,
+				  const struct cred *to, struct file *file)
 {
 	return call_int_hook(binder_transfer_file, 0, from, to, file);
 }
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -255,29 +255,6 @@ static inline u32 task_sid_obj(const str
 	return sid;
 }
 
-/*
- * get the security ID of a task for use with binder
- */
-static inline u32 task_sid_binder(const struct task_struct *task)
-{
-	/*
-	 * In many case where this function is used we should be using the
-	 * task's subjective SID, but we can't reliably access the subjective
-	 * creds of a task other than our own so we must use the objective
-	 * creds/SID, which are safe to access.  The downside is that if a task
-	 * is temporarily overriding it's creds it will not be reflected here;
-	 * however, it isn't clear that binder would handle that case well
-	 * anyway.
-	 *
-	 * If this ever changes and we can safely reference the subjective
-	 * creds/SID of another task, this function will make it easier to
-	 * identify the various places where we make use of the task SIDs in
-	 * the binder code.  It is also likely that we will need to adjust
-	 * the main drivers/android binder code as well.
-	 */
-	return task_sid_obj(task);
-}
-
 static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dentry);
 
 /*
@@ -2066,18 +2043,19 @@ static inline u32 open_file_to_av(struct
 
 /* Hook functions begin here. */
 
-static int selinux_binder_set_context_mgr(struct task_struct *mgr)
+static int selinux_binder_set_context_mgr(const struct cred *mgr)
 {
 	return avc_has_perm(&selinux_state,
-			    current_sid(), task_sid_binder(mgr), SECCLASS_BINDER,
+			    current_sid(), cred_sid(mgr), SECCLASS_BINDER,
 			    BINDER__SET_CONTEXT_MGR, NULL);
 }
 
-static int selinux_binder_transaction(struct task_struct *from,
-				      struct task_struct *to)
+static int selinux_binder_transaction(const struct cred *from,
+				      const struct cred *to)
 {
 	u32 mysid = current_sid();
-	u32 fromsid = task_sid_binder(from);
+	u32 fromsid = cred_sid(from);
+	u32 tosid = cred_sid(to);
 	int rc;
 
 	if (mysid != fromsid) {
@@ -2088,24 +2066,24 @@ static int selinux_binder_transaction(st
 			return rc;
 	}
 
-	return avc_has_perm(&selinux_state, fromsid, task_sid_binder(to),
+	return avc_has_perm(&selinux_state, fromsid, tosid,
 			    SECCLASS_BINDER, BINDER__CALL, NULL);
 }
 
-static int selinux_binder_transfer_binder(struct task_struct *from,
-					  struct task_struct *to)
+static int selinux_binder_transfer_binder(const struct cred *from,
+					  const struct cred *to)
 {
 	return avc_has_perm(&selinux_state,
-			    task_sid_binder(from), task_sid_binder(to),
+			    cred_sid(from), cred_sid(to),
 			    SECCLASS_BINDER, BINDER__TRANSFER,
 			    NULL);
 }
 
-static int selinux_binder_transfer_file(struct task_struct *from,
-					struct task_struct *to,
+static int selinux_binder_transfer_file(const struct cred *from,
+					const struct cred *to,
 					struct file *file)
 {
-	u32 sid = task_sid_binder(to);
+	u32 sid = cred_sid(to);
 	struct file_security_struct *fsec = selinux_file(file);
 	struct dentry *dentry = file->f_path.dentry;
 	struct inode_security_struct *isec;

[PATCH 5.15 10/26] binder: use cred instead of task for getsecid

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 4d5b5539742d2554591751b4248b0204d20dcc9d upstream.

Use the 'struct cred' saved at binder_open() to lookup
the security ID via security_cred_getsecid(). This
ensures that the security context that opened binder
is the one used to generate the secctx.

Cc: stable@vger.kernel.org # 5.4+
Fixes: ec74136ded79 ("binder: create node flag to request sender's security context")
Signed-off-by: Todd Kjos <tkjos@google.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   11 +----------
 include/linux/security.h |    5 +++++
 2 files changed, 6 insertions(+), 10 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -2722,16 +2722,7 @@ static void binder_transaction(struct bi
 		u32 secid;
 		size_t added_size;
 
-		/*
-		 * Arguably this should be the task's subjective LSM secid but
-		 * we can't reliably access the subjective creds of a task
-		 * other than our own so we must use the objective creds, which
-		 * are safe to access.  The downside is that if a task is
-		 * temporarily overriding it's creds it will not be reflected
-		 * here; however, it isn't clear that binder would handle that
-		 * case well anyway.
-		 */
-		security_task_getsecid_obj(proc->tsk, &secid);
+		security_cred_getsecid(proc->cred, &secid);
 		ret = security_secid_to_secctx(secid, &secctx, &secctx_sz);
 		if (ret) {
 			return_error = BR_FAILED_REPLY;
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -1041,6 +1041,11 @@ static inline void security_transfer_cre
 {
 }
 
+static inline void security_cred_getsecid(const struct cred *c, u32 *secid)
+{
+	*secid = 0;
+}
+
 static inline int security_kernel_act_as(struct cred *cred, u32 secid)
 {
 	return 0;

[PATCH 5.15 11/26] binder: dont detect sender/target during buffer cleanup

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@google.com>

commit 32e9f56a96d8d0f23cb2aeb2a3cd18d40393e787 upstream.

When freeing txn buffers, binder_transaction_buffer_release()
attempts to detect whether the current context is the target by
comparing current->group_leader to proc->tsk. This is an unreliable
test. Instead explicitly pass an 'is_failure' boolean.

Detecting the sender was being used as a way to tell if the
transaction failed to be sent.  When cleaning up after
failing to send a transaction, there is no need to close
the fds associated with a BINDER_TYPE_FDA object. Now
'is_failure' can be used to accurately detect this case.

Fixes: 44d8047f1d87 ("binder: use standard functions to allocate fds")
Cc: stable <stable@vger.kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/android/binder.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1870,7 +1870,7 @@ static void binder_transaction_buffer_re
 		binder_dec_node(buffer->target_node, 1, 0);
 
 	off_start_offset = ALIGN(buffer->data_size, sizeof(void *));
-	off_end_offset = is_failure ? failed_at :
+	off_end_offset = is_failure && failed_at ? failed_at :
 				off_start_offset + buffer->offsets_size;
 	for (buffer_offset = off_start_offset; buffer_offset < off_end_offset;
 	     buffer_offset += sizeof(binder_size_t)) {
@@ -1956,9 +1956,8 @@ static void binder_transaction_buffer_re
 			binder_size_t fd_buf_size;
 			binder_size_t num_valid;
 
-			if (proc->tsk != current->group_leader) {
+			if (is_failure) {
 				/*
-				 * Nothing to do if running in sender context
 				 * The fd fixups have not been applied so no
 				 * fds need to be closed.
 				 */
@@ -3176,6 +3175,7 @@ err_invalid_target_handle:
  * binder_free_buf() - free the specified buffer
  * @proc:	binder proc that owns buffer
  * @buffer:	buffer to be freed
+ * @is_failure:	failed to send transaction
  *
  * If buffer for an async transaction, enqueue the next async
  * transaction from the node.
@@ -3185,7 +3185,7 @@ err_invalid_target_handle:
 static void
 binder_free_buf(struct binder_proc *proc,
 		struct binder_thread *thread,
-		struct binder_buffer *buffer)
+		struct binder_buffer *buffer, bool is_failure)
 {
 	binder_inner_proc_lock(proc);
 	if (buffer->transaction) {
@@ -3213,7 +3213,7 @@ binder_free_buf(struct binder_proc *proc
 		binder_node_inner_unlock(buf_node);
 	}
 	trace_binder_transaction_buffer_release(buffer);
-	binder_transaction_buffer_release(proc, thread, buffer, 0, false);
+	binder_transaction_buffer_release(proc, thread, buffer, 0, is_failure);
 	binder_alloc_free_buf(&proc->alloc, buffer);
 }
 
@@ -3415,7 +3415,7 @@ static int binder_thread_write(struct bi
 				     proc->pid, thread->pid, (u64)data_ptr,
 				     buffer->debug_id,
 				     buffer->transaction ? "active" : "finished");
-			binder_free_buf(proc, thread, buffer);
+			binder_free_buf(proc, thread, buffer, false);
 			break;
 		}
 
@@ -4108,7 +4108,7 @@ retry:
 			buffer->transaction = NULL;
 			binder_cleanup_transaction(t, "fd fixups failed",
 						   BR_FAILED_REPLY);
-			binder_free_buf(proc, thread, buffer);
+			binder_free_buf(proc, thread, buffer, true);
 			binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
 				     "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n",
 				     proc->pid, thread->pid,

[PATCH 5.15 12/26] kfence: always use static branches to guard kfence_alloc()

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

commit 07e8481d3c38f461d7b79c1d5c9afe013b162b0c upstream.

Regardless of KFENCE mode (CONFIG_KFENCE_STATIC_KEYS: either using
static keys to gate allocations, or using a simple dynamic branch),
always use a static branch to avoid the dynamic branch in kfence_alloc()
if KFENCE was disabled at boot.

For CONFIG_KFENCE_STATIC_KEYS=n, this now avoids the dynamic branch if
KFENCE was disabled at boot.

To simplify, also unifies the location where kfence_allocation_gate is
read-checked to just be inline in kfence_alloc().

Link: https://lkml.kernel.org/r/20211019102524.2807208-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kfence.h |   21 +++++++++++----------
 mm/kfence/core.c       |   16 +++++++---------
 2 files changed, 18 insertions(+), 19 deletions(-)

--- a/include/linux/kfence.h
+++ b/include/linux/kfence.h
@@ -14,6 +14,9 @@
 
 #ifdef CONFIG_KFENCE
 
+#include <linux/atomic.h>
+#include <linux/static_key.h>
+
 /*
  * We allocate an even number of pages, as it simplifies calculations to map
  * address to metadata indices; effectively, the very first page serves as an
@@ -22,13 +25,8 @@
 #define KFENCE_POOL_SIZE ((CONFIG_KFENCE_NUM_OBJECTS + 1) * 2 * PAGE_SIZE)
 extern char *__kfence_pool;
 
-#ifdef CONFIG_KFENCE_STATIC_KEYS
-#include <linux/static_key.h>
 DECLARE_STATIC_KEY_FALSE(kfence_allocation_key);
-#else
-#include <linux/atomic.h>
 extern atomic_t kfence_allocation_gate;
-#endif
 
 /**
  * is_kfence_address() - check if an address belongs to KFENCE pool
@@ -116,13 +114,16 @@ void *__kfence_alloc(struct kmem_cache *
  */
 static __always_inline void *kfence_alloc(struct kmem_cache *s, size_t size, gfp_t flags)
 {
-#ifdef CONFIG_KFENCE_STATIC_KEYS
-	if (static_branch_unlikely(&kfence_allocation_key))
+#if defined(CONFIG_KFENCE_STATIC_KEYS) || CONFIG_KFENCE_SAMPLE_INTERVAL == 0
+	if (!static_branch_unlikely(&kfence_allocation_key))
+		return NULL;
 #else
-	if (unlikely(!atomic_read(&kfence_allocation_gate)))
+	if (!static_branch_likely(&kfence_allocation_key))
+		return NULL;
 #endif
-		return __kfence_alloc(s, size, flags);
-	return NULL;
+	if (likely(atomic_read(&kfence_allocation_gate)))
+		return NULL;
+	return __kfence_alloc(s, size, flags);
 }
 
 /**
--- a/mm/kfence/core.c
+++ b/mm/kfence/core.c
@@ -97,10 +97,11 @@ struct kfence_metadata kfence_metadata[C
 static struct list_head kfence_freelist = LIST_HEAD_INIT(kfence_freelist);
 static DEFINE_RAW_SPINLOCK(kfence_freelist_lock); /* Lock protecting freelist. */
 
-#ifdef CONFIG_KFENCE_STATIC_KEYS
-/* The static key to set up a KFENCE allocation. */
+/*
+ * The static key to set up a KFENCE allocation; or if static keys are not used
+ * to gate allocations, to avoid a load and compare if KFENCE is disabled.
+ */
 DEFINE_STATIC_KEY_FALSE(kfence_allocation_key);
-#endif
 
 /* Gates the allocation, ensuring only one succeeds in a given period. */
 atomic_t kfence_allocation_gate = ATOMIC_INIT(1);
@@ -668,6 +669,8 @@ void __init kfence_init(void)
 		return;
 	}
 
+	if (!IS_ENABLED(CONFIG_KFENCE_STATIC_KEYS))
+		static_branch_enable(&kfence_allocation_key);
 	WRITE_ONCE(kfence_enabled, true);
 	queue_delayed_work(system_unbound_wq, &kfence_timer, 0);
 	pr_info("initialized - using %lu bytes for %d objects at 0x%p-0x%p\n", KFENCE_POOL_SIZE,
@@ -752,12 +755,7 @@ void *__kfence_alloc(struct kmem_cache *
 	    (s->flags & (SLAB_CACHE_DMA | SLAB_CACHE_DMA32)))
 		return NULL;
 
-	/*
-	 * allocation_gate only needs to become non-zero, so it doesn't make
-	 * sense to continue writing to it and pay the associated contention
-	 * cost, in case we have a large number of concurrent allocations.
-	 */
-	if (atomic_read(&kfence_allocation_gate) || atomic_inc_return(&kfence_allocation_gate) > 1)
+	if (atomic_inc_return(&kfence_allocation_gate) > 1)
 		return NULL;
 #ifdef CONFIG_KFENCE_STATIC_KEYS
 	/*

[PATCH 5.15 13/26] kfence: default to dynamic branch instead of static keys mode

[Greg Kroah-Hartman]

From: Marco Elver <elver@google.com>

commit 4f612ed3f748962cbef1316ff3d323e2b9055b6e upstream.

We have observed that on very large machines with newer CPUs, the static
key/branch switching delay is on the order of milliseconds.  This is due
to the required broadcast IPIs, which simply does not scale well to
hundreds of CPUs (cores).  If done too frequently, this can adversely
affect tail latencies of various workloads.

One workaround is to increase the sample interval to several seconds,
while decreasing sampled allocation coverage, but the problem still
exists and could still increase tail latencies.

As already noted in the Kconfig help text, there are trade-offs: at
lower sample intervals the dynamic branch results in better performance;
however, at very large sample intervals, the static keys mode can result
in better performance -- careful benchmarking is recommended.

Our initial benchmarking showed that with large enough sample intervals
and workloads stressing the allocator, the static keys mode was slightly
better.  Evaluating and observing the possible system-wide side-effects
of the static-key-switching induced broadcast IPIs, however, was a blind
spot (in particular on large machines with 100s of cores).

Therefore, a major downside of the static keys mode is, unfortunately,
that it is hard to predict performance on new system architectures and
topologies, but also making conclusions about performance of new
workloads based on a limited set of benchmarks.

Most distributions will simply select the defaults, while targeting a
large variety of different workloads and system architectures.  As such,
the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is
only recommended after careful evaluation.

For reference, on x86-64 the condition in kfence_alloc() generates
exactly
2 instructions in the kmem_cache_alloc() fast-path:

 | ...
 | cmpl   $0x0,0x1a8021c(%rip)  # ffffffff82d560d0 <kfence_allocation_gate>
 | je     ffffffff812d6003      <kmem_cache_alloc+0x243>
 | ...

which, given kfence_allocation_gate is infrequently modified, should be
well predicted by most CPUs.

Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/dev-tools/kfence.rst |   12 ++++++++----
 lib/Kconfig.kfence                 |   26 +++++++++++++++-----------
 2 files changed, 23 insertions(+), 15 deletions(-)

--- a/Documentation/dev-tools/kfence.rst
+++ b/Documentation/dev-tools/kfence.rst
@@ -231,10 +231,14 @@ Guarded allocations are set up based on
 of the sample interval, the next allocation through the main allocator (SLAB or
 SLUB) returns a guarded allocation from the KFENCE object pool (allocation
 sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and
-the next allocation is set up after the expiration of the interval. To "gate" a
-KFENCE allocation through the main allocator's fast-path without overhead,
-KFENCE relies on static branches via the static keys infrastructure. The static
-branch is toggled to redirect the allocation to KFENCE.
+the next allocation is set up after the expiration of the interval.
+
+When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated"
+through the main allocator's fast-path by relying on static branches via the
+static keys infrastructure. The static branch is toggled to redirect the
+allocation to KFENCE. Depending on sample interval, target workloads, and
+system architecture, this may perform better than the simple dynamic branch.
+Careful benchmarking is recommended.
 
 KFENCE objects each reside on a dedicated page, at either the left or right
 page boundaries selected at random. The pages to the left and right of the
--- a/lib/Kconfig.kfence
+++ b/lib/Kconfig.kfence
@@ -25,17 +25,6 @@ menuconfig KFENCE
 
 if KFENCE
 
-config KFENCE_STATIC_KEYS
-	bool "Use static keys to set up allocations"
-	default y
-	depends on JUMP_LABEL # To ensure performance, require jump labels
-	help
-	  Use static keys (static branches) to set up KFENCE allocations. Using
-	  static keys is normally recommended, because it avoids a dynamic
-	  branch in the allocator's fast path. However, with very low sample
-	  intervals, or on systems that do not support jump labels, a dynamic
-	  branch may still be an acceptable performance trade-off.
-
 config KFENCE_SAMPLE_INTERVAL
 	int "Default sample interval in milliseconds"
 	default 100
@@ -56,6 +45,21 @@ config KFENCE_NUM_OBJECTS
 	  pages are required; with one containing the object and two adjacent
 	  ones used as guard pages.
 
+config KFENCE_STATIC_KEYS
+	bool "Use static keys to set up allocations" if EXPERT
+	depends on JUMP_LABEL
+	help
+	  Use static keys (static branches) to set up KFENCE allocations. This
+	  option is only recommended when using very large sample intervals, or
+	  performance has carefully been evaluated with this option.
+
+	  Using static keys comes with trade-offs that need to be carefully
+	  evaluated given target workloads and system architectures. Notably,
+	  enabling and disabling static keys invoke IPI broadcasts, the latency
+	  and impact of which is much harder to predict than a dynamic branch.
+
+	  Say N if you are unsure.
+
 config KFENCE_STRESS_TEST_FAULTS
 	int "Stress testing of fault handling and error reporting" if EXPERT
 	default 0

[PATCH 5.15 14/26] btrfs: fix lzo_decompress_bio() kmap leakage

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 2cf3f8133bda2a0945cc4c70e681ecb25b52b913 upstream.

Commit ccaa66c8dd27 reinstated the kmap/kunmap that had been dropped in
commit 8c945d32e604 ("btrfs: compression: drop kmap/kunmap from lzo").

However, it seems to have done so incorrectly due to the change not
reverting cleanly, and lzo_decompress_bio() ended up not having a
matching "kunmap()" to the "kmap()" that was put back.

Also, any assert that the page pointer is not NULL should be before the
kmap() of said pointer, since otherwise you'd just oops in the kmap()
before the assert would even trigger.

I noticed this when trying to verify my btrfs merge, and things not
adding up.  I'm doing this fixup before re-doing my merge, because this
commit needs to also be backported to 5.15 (after verification from the
btrfs people).

Fixes: ccaa66c8dd27 ("Revert 'btrfs: compression: drop kmap/kunmap from lzo'")
Cc: David Sterba <dsterba@suse.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/lzo.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/btrfs/lzo.c
+++ b/fs/btrfs/lzo.c
@@ -357,9 +357,10 @@ int lzo_decompress_bio(struct list_head
 		ASSERT(cur_in / sectorsize ==
 		       (cur_in + LZO_LEN - 1) / sectorsize);
 		cur_page = cb->compressed_pages[cur_in / PAGE_SIZE];
-		kaddr = kmap(cur_page);
 		ASSERT(cur_page);
+		kaddr = kmap(cur_page);
 		seg_len = read_compress_length(kaddr + offset_in_page(cur_in));
+		kunmap(cur_page);
 		cur_in += LZO_LEN;
 
 		/* Copy the compressed segment payload into workspace */

[PATCH 5.15 15/26] staging: rtl8712: fix use-after-free in rtl8712_dl_fw

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit c052cc1a069c3e575619cf64ec427eb41176ca70 upstream.

Syzbot reported use-after-free in rtl8712_dl_fw(). The problem was in
race condition between r871xu_dev_remove() ->ndo_open() callback.

It's easy to see from crash log, that driver accesses released firmware
in ->ndo_open() callback. It may happen, since driver was releasing
firmware _before_ unregistering netdev. Fix it by moving
unregister_netdev() before cleaning up resources.

Call Trace:
...
 rtl871x_open_fw drivers/staging/rtl8712/hal_init.c:83 [inline]
 rtl8712_dl_fw+0xd95/0xe10 drivers/staging/rtl8712/hal_init.c:170
 rtl8712_hal_init drivers/staging/rtl8712/hal_init.c:330 [inline]
 rtl871x_hal_init+0xae/0x180 drivers/staging/rtl8712/hal_init.c:394
 netdev_open+0xe6/0x6c0 drivers/staging/rtl8712/os_intfs.c:380
 __dev_open+0x2bc/0x4d0 net/core/dev.c:1484

Freed by task 1306:
...
 release_firmware+0x1b/0x30 drivers/base/firmware_loader/main.c:1053
 r871xu_dev_remove+0xcc/0x2c0 drivers/staging/rtl8712/usb_intf.c:599
 usb_unbind_interface+0x1d8/0x8d0 drivers/usb/core/driver.c:458

Fixes: 8c213fa59199 ("staging: r8712u: Use asynchronous firmware loading")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+c55162be492189fb4f51@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211019211718.26354-1-paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/usb_intf.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -595,12 +595,12 @@ static void r871xu_dev_remove(struct usb
 
 	/* never exit with a firmware callback pending */
 	wait_for_completion(&padapter->rtl8712_fw_ready);
+	if (pnetdev->reg_state != NETREG_UNINITIALIZED)
+		unregister_netdev(pnetdev); /* will call netdev_close() */
 	usb_set_intfdata(pusb_intf, NULL);
 	release_firmware(padapter->fw);
 	if (drvpriv.drv_registered)
 		padapter->surprise_removed = true;
-	if (pnetdev->reg_state != NETREG_UNINITIALIZED)
-		unregister_netdev(pnetdev); /* will call netdev_close() */
 	r8712_flush_rwctrl_works(padapter);
 	r8712_flush_led_works(padapter);
 	udelay(1);

[PATCH 5.15 16/26] isofs: Fix out of bound access for corrupted isofs image

[Greg Kroah-Hartman]

From: Jan Kara <jack@suse.cz>

commit e96a1866b40570b5950cda8602c2819189c62a48 upstream.

When isofs image is suitably corrupted isofs_read_inode() can read data
beyond the end of buffer. Sanity-check the directory entry length before
using it.

Reported-and-tested-by: syzbot+6fc7fb214625d82af7d1@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/isofs/inode.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -1322,6 +1322,8 @@ static int isofs_read_inode(struct inode
 
 	de = (struct iso_directory_record *) (bh->b_data + offset);
 	de_len = *(unsigned char *) de;
+	if (de_len < sizeof(struct iso_directory_record))
+		goto fail;
 
 	if (offset + de_len > bufsize) {
 		int frag1 = bufsize - offset;

[PATCH 5.15 17/26] comedi: dt9812: fix DMA buffers on stack

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 536de747bc48262225889a533db6650731ab25d3 upstream.

USB transfer buffers are typically mapped for DMA and must not be
allocated on the stack or transfers will fail.

Allocate proper transfer buffers in the various command helpers and
return an error on short transfers instead of acting on random stack
data.

Note that this also fixes a stack info leak on systems where DMA is not
used as 32 bytes are always sent to the device regardless of how short
the command is.

Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver")
Cc: stable@vger.kernel.org      # 2.6.29
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/dt9812.c |  115 +++++++++++++++++++++++++++++-----------
 1 file changed, 86 insertions(+), 29 deletions(-)

--- a/drivers/comedi/drivers/dt9812.c
+++ b/drivers/comedi/drivers/dt9812.c
@@ -32,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/slab.h>
 #include <linux/uaccess.h>
 
 #include "../comedi_usb.h"
@@ -237,22 +238,42 @@ static int dt9812_read_info(struct comed
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
+	size_t tbuf_size;
 	int count, ret;
+	void *tbuf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
-	cmd.u.flash_data_info.address =
+	tbuf_size = max(sizeof(*cmd), buf_size);
+
+	tbuf = kzalloc(tbuf_size, GFP_KERNEL);
+	if (!tbuf)
+		return -ENOMEM;
+
+	cmd = tbuf;
+
+	cmd->cmd = cpu_to_le32(DT9812_R_FLASH_DATA);
+	cmd->u.flash_data_info.address =
 	    cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset);
-	cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size);
+	cmd->u.flash_data_info.numbytes = cpu_to_le16(buf_size);
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
+
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   tbuf, buf_size, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == buf_size)
+			memcpy(buf, tbuf, buf_size);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(tbuf);
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    buf, buf_size, &count, DT9812_USB_TIMEOUT);
+	return ret;
 }
 
 static int dt9812_read_multiple_registers(struct comedi_device *dev,
@@ -261,22 +282,42 @@ static int dt9812_read_multiple_register
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count, ret;
+	size_t buf_size;
+	void *buf;
+
+	buf_size = max_t(size_t, sizeof(*cmd), reg_count);
+
+	buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	cmd = buf;
 
-	cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.read_multi_info.address[i] = address[i];
+		cmd->u.read_multi_info.address[i] = address[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
 	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			   &cmd, 32, &count, DT9812_USB_TIMEOUT);
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
 	if (ret)
-		return ret;
+		goto out;
 
-	return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
-			    value, reg_count, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr),
+			   buf, reg_count, &count, DT9812_USB_TIMEOUT);
+	if (!ret) {
+		if (count == reg_count)
+			memcpy(value, buf, reg_count);
+		else
+			ret = -EREMOTEIO;
+	}
+out:
+	kfree(buf);
+
+	return ret;
 }
 
 static int dt9812_write_multiple_registers(struct comedi_device *dev,
@@ -285,19 +326,27 @@ static int dt9812_write_multiple_registe
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
 
-	cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
-	cmd.u.read_multi_info.count = reg_count;
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
+
+	cmd->cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG);
+	cmd->u.read_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++) {
-		cmd.u.write_multi_info.write[i].address = address[i];
-		cmd.u.write_multi_info.write[i].value = value[i];
+		cmd->u.write_multi_info.write[i].address = address[i];
+		cmd->u.write_multi_info.write[i].value = value[i];
 	}
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_rmw_multiple_registers(struct comedi_device *dev,
@@ -306,17 +355,25 @@ static int dt9812_rmw_multiple_registers
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct dt9812_private *devpriv = dev->private;
-	struct dt9812_usb_cmd cmd;
+	struct dt9812_usb_cmd *cmd;
 	int i, count;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd)
+		return -ENOMEM;
 
-	cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
-	cmd.u.rmw_multi_info.count = reg_count;
+	cmd->cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG);
+	cmd->u.rmw_multi_info.count = reg_count;
 	for (i = 0; i < reg_count; i++)
-		cmd.u.rmw_multi_info.rmw[i] = rmw[i];
+		cmd->u.rmw_multi_info.rmw[i] = rmw[i];
 
 	/* DT9812 only responds to 32 byte writes!! */
-	return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
-			    &cmd, 32, &count, DT9812_USB_TIMEOUT);
+	ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr),
+			   cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT);
+	kfree(cmd);
+
+	return ret;
 }
 
 static int dt9812_digital_in(struct comedi_device *dev, u8 *bits)

[PATCH 5.15 18/26] comedi: ni_usb6501: fix NULL-deref in command paths

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 907767da8f3a925b060c740e0b5c92ea7dbec440 upstream.

The driver uses endpoint-sized USB transfer buffers but had no sanity
checks on the sizes. This can lead to zero-size-pointer dereferences or
overflowed transfer buffers in ni6501_port_command() and
ni6501_counter_command() if a (malicious) device has smaller max-packet
sizes than expected (or when doing descriptor fuzz testing).

Add the missing sanity checks to probe().

Fixes: a03bb00e50ab ("staging: comedi: add NI USB-6501 support")
Cc: stable@vger.kernel.org      # 3.18
Cc: Luca Ellero <luca.ellero@brickedbrain.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211027093529.30896-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/ni_usb6501.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/drivers/comedi/drivers/ni_usb6501.c
+++ b/drivers/comedi/drivers/ni_usb6501.c
@@ -144,6 +144,10 @@ static const u8 READ_COUNTER_RESPONSE[]
 					   0x00, 0x00, 0x00, 0x02,
 					   0x00, 0x00, 0x00, 0x00};
 
+/* Largest supported packets */
+static const size_t TX_MAX_SIZE	= sizeof(SET_PORT_DIR_REQUEST);
+static const size_t RX_MAX_SIZE	= sizeof(READ_PORT_RESPONSE);
+
 enum commands {
 	READ_PORT,
 	WRITE_PORT,
@@ -501,6 +505,12 @@ static int ni6501_find_endpoints(struct
 	if (!devpriv->ep_rx || !devpriv->ep_tx)
 		return -ENODEV;
 
+	if (usb_endpoint_maxp(devpriv->ep_rx) < RX_MAX_SIZE)
+		return -ENODEV;
+
+	if (usb_endpoint_maxp(devpriv->ep_tx) < TX_MAX_SIZE)
+		return -ENODEV;
+
 	return 0;
 }
 

[PATCH 5.15 19/26] comedi: vmk80xx: fix transfer-buffer overflows

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream.

The driver uses endpoint-sized USB transfer buffers but up until
recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize
of usb endpoints found") inadvertently fixed NULL-pointer dereferences
when accessing the transfer buffers in case a malicious device has a
zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other
accesses that are done without a size check (e.g. byte 18 in
vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond
the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers.
Support was later added for a device that uses bulk transfers and is
presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/vmk80xx.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -90,6 +90,8 @@ enum {
 #define IC3_VERSION		BIT(0)
 #define IC6_VERSION		BIT(1)
 
+#define MIN_BUF_SIZE		64
+
 enum vmk80xx_model {
 	VMK8055_MODEL,
 	VMK8061_MODEL
@@ -678,12 +680,12 @@ static int vmk80xx_alloc_usb_buffers(str
 	struct vmk80xx_private *devpriv = dev->private;
 	size_t size;
 
-	size = usb_endpoint_maxp(devpriv->ep_rx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_rx_buf)
 		return -ENOMEM;
 
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE);
 	devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL);
 	if (!devpriv->usb_tx_buf)
 		return -ENOMEM;

[PATCH 5.15 20/26] comedi: vmk80xx: fix bulk-buffer overflow

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 78cdfd62bd54af615fba9e3ca1ba35de39d3871d upstream.

The driver is using endpoint-sized buffers but must not assume that the
tx and rx buffers are of equal size or a malicious device could overflow
the slab-allocated receive buffer when doing bulk transfers.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/vmk80xx.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -159,22 +159,20 @@ static void vmk80xx_do_bulk_msg(struct c
 	__u8 rx_addr;
 	unsigned int tx_pipe;
 	unsigned int rx_pipe;
-	size_t size;
+	size_t tx_size;
+	size_t rx_size;
 
 	tx_addr = devpriv->ep_tx->bEndpointAddress;
 	rx_addr = devpriv->ep_rx->bEndpointAddress;
 	tx_pipe = usb_sndbulkpipe(usb, tx_addr);
 	rx_pipe = usb_rcvbulkpipe(usb, rx_addr);
-
-	/*
-	 * The max packet size attributes of the K8061
-	 * input/output endpoints are identical
-	 */
-	size = usb_endpoint_maxp(devpriv->ep_tx);
+	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
+	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
 	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     size, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, size, NULL, HZ * 10);
+		     tx_size, NULL, devpriv->ep_tx->bInterval);
+
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)

[PATCH 5.15 21/26] comedi: vmk80xx: fix bulk and interrupt message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream.

USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.

Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/comedi/drivers/vmk80xx.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -91,6 +91,7 @@ enum {
 #define IC6_VERSION		BIT(1)
 
 #define MIN_BUF_SIZE		64
+#define PACKET_TIMEOUT		10000	/* ms */
 
 enum vmk80xx_model {
 	VMK8055_MODEL,
@@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct c
 	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
 	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
-	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
 
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct co
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct c
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_reset_device(struct comedi_device *dev)

[PATCH 5.15 22/26] staging: r8712u: fix control-message timeout

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit ce4940525f36ffdcf4fa623bcedab9c2a6db893a upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable@vger.kernel.org      # 2.6.37
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025120910.6339-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8712/usb_ops_linux.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/rtl8712/usb_ops_linux.c
+++ b/drivers/staging/rtl8712/usb_ops_linux.c
@@ -494,7 +494,7 @@ int r8712_usbctrl_vendorreq(struct intf_
 		memcpy(pIo_buf, pdata, len);
 	}
 	status = usb_control_msg(udev, pipe, request, reqtype, value, index,
-				 pIo_buf, len, HZ / 2);
+				 pIo_buf, len, 500);
 	if (status > 0) {  /* Success this control transfer. */
 		if (requesttype == 0x01) {
 			/* For Control read transfer, we have to copy the read

[PATCH 5.15 23/26] staging: rtl8192u: fix control-message timeouts

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Cc: stable@vger.kernel.org      # 2.6.33
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211025120910.6339-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/rtl8192u/r8192U_core.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -229,7 +229,7 @@ int write_nic_byte_E(struct net_device *
 
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -251,7 +251,7 @@ int read_nic_byte_E(struct net_device *d
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 1, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -279,7 +279,7 @@ int write_nic_byte(struct net_device *de
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -305,7 +305,7 @@ int write_nic_word(struct net_device *de
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -331,7 +331,7 @@ int write_nic_dword(struct net_device *d
 	status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	kfree(usbdata);
 
 	if (status < 0) {
@@ -355,7 +355,7 @@ int read_nic_byte(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 1, HZ / 2);
+				 usbdata, 1, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -380,7 +380,7 @@ int read_nic_word(struct net_device *dev
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 2, HZ / 2);
+				 usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -404,7 +404,7 @@ static int read_nic_word_E(struct net_de
 
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
-				 indx | 0xfe00, 0, usbdata, 2, HZ / 2);
+				 indx | 0xfe00, 0, usbdata, 2, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 
@@ -430,7 +430,7 @@ int read_nic_dword(struct net_device *de
 	status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 RTL8187_REQ_GET_REGS, RTL8187_REQT_READ,
 				 (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f,
-				 usbdata, 4, HZ / 2);
+				 usbdata, 4, 500);
 	*data = *usbdata;
 	kfree(usbdata);
 

[PATCH 5.15 24/26] staging: r8188eu: fix memleak in rtw_wx_set_enc_ext

[Greg Kroah-Hartman]

From: Martin Kaiser <martin@kaiser.cx>

commit 26f448371820cf733c827c11f0c77ce304a29b51 upstream.

Free the param struct if the caller sets an unsupported algorithm
and we return an error.

Fixes: 2b42bd58b321 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20211019202356.12572-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/r8188eu/os_dep/ioctl_linux.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/staging/r8188eu/os_dep/ioctl_linux.c
+++ b/drivers/staging/r8188eu/os_dep/ioctl_linux.c
@@ -1978,7 +1978,7 @@ static int rtw_wx_set_enc_ext(struct net
 	struct ieee_param *param = NULL;
 	struct iw_point *pencoding = &wrqu->encoding;
 	struct iw_encode_ext *pext = (struct iw_encode_ext *)extra;
-	int ret = 0;
+	int ret = -1;
 
 	param_len = sizeof(struct ieee_param) + pext->key_len;
 	param = kzalloc(param_len, GFP_KERNEL);
@@ -2004,7 +2004,7 @@ static int rtw_wx_set_enc_ext(struct net
 		alg_name = "CCMP";
 		break;
 	default:
-		return -1;
+		goto out;
 	}
 
 	strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
@@ -2031,6 +2031,7 @@ static int rtw_wx_set_enc_ext(struct net
 
 	ret =  wpa_set_encryption(dev, param, param_len);
 
+out:
 	kfree(param);
 	return ret;
 }

[PATCH 5.15 25/26] media: staging/intel-ipu3: css: Fix wrong size comparison imgu_css_fw_init

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavoars@kernel.org>

commit a44f9d6f9dc1fb314a3f1ed2dcd4fbbcc3d9f892 upstream.

There is a wrong comparison of the total size of the loaded firmware
css->fw->size with the size of a pointer to struct imgu_fw_header.

Turn binary_header into a flexible-array member[1][2], use the
struct_size() helper and fix the wrong size comparison. Notice
that the loaded firmware needs to contain at least one 'struct
imgu_fw_info' item in the binary_header[] array.

It's also worth mentioning that

	"css->fw->size < struct_size(css->fwp, binary_header, 1)"

with binary_header declared as a flexible-array member is equivalent
to

	"css->fw->size < sizeof(struct imgu_fw_header)"

with binary_header declared as a one-element array (as in the original
code).

The replacement of the one-element array with a flexible-array member
also helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109

Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/media/ipu3/ipu3-css-fw.c |    7 +++----
 drivers/staging/media/ipu3/ipu3-css-fw.h |    2 +-
 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/staging/media/ipu3/ipu3-css-fw.c
+++ b/drivers/staging/media/ipu3/ipu3-css-fw.c
@@ -124,12 +124,11 @@ int imgu_css_fw_init(struct imgu_css *cs
 	/* Check and display fw header info */
 
 	css->fwp = (struct imgu_fw_header *)css->fw->data;
-	if (css->fw->size < sizeof(struct imgu_fw_header *) ||
+	if (css->fw->size < struct_size(css->fwp, binary_header, 1) ||
 	    css->fwp->file_header.h_size != sizeof(struct imgu_fw_bi_file_h))
 		goto bad_fw;
-	if (sizeof(struct imgu_fw_bi_file_h) +
-	    css->fwp->file_header.binary_nr * sizeof(struct imgu_fw_info) >
-	    css->fw->size)
+	if (struct_size(css->fwp, binary_header,
+			css->fwp->file_header.binary_nr) > css->fw->size)
 		goto bad_fw;
 
 	dev_info(dev, "loaded firmware version %.64s, %u binaries, %zu bytes\n",
--- a/drivers/staging/media/ipu3/ipu3-css-fw.h
+++ b/drivers/staging/media/ipu3/ipu3-css-fw.h
@@ -171,7 +171,7 @@ struct imgu_fw_bi_file_h {
 
 struct imgu_fw_header {
 	struct imgu_fw_bi_file_h file_header;
-	struct imgu_fw_info binary_header[1];	/* binary_nr items */
+	struct imgu_fw_info binary_header[];	/* binary_nr items */
 };
 
 /******************* Firmware functions *******************/

[PATCH 5.15 26/26] rsi: fix control-message timeout

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 541fd20c3ce5b0bc39f0c6a52414b6b92416831c upstream.

USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.

Use the common control-message timeout define for the five-second
timeout.

Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver")
Cc: stable@vger.kernel.org      # 3.15
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211025120522.6045-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/rsi/rsi_91x_usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/rsi/rsi_91x_usb.c
+++ b/drivers/net/wireless/rsi/rsi_91x_usb.c
@@ -61,7 +61,7 @@ static int rsi_usb_card_write(struct rsi
 			      (void *)seg,
 			      (int)len,
 			      &transfer,
-			      HZ * 5);
+			      USB_CTRL_SET_TIMEOUT);
 
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,

Re: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Florian Fainelli]

On 11/10/21 10:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB, using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Naresh Kamboju]

On Thu, 11 Nov 2021 at 00:21, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.2-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.15.y
* git commit: 12d0445d66e0451efe07e65f9713fff3d71c3205
* git describe: v5.15.1-27-g12d0445d66e0
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.1-27-g12d0445d66e0

## No regressions (compared to v5.15.1)

## No fixes (compared to v5.15.1)


## Test result summary
total: 97508, pass: 82057, fail: 1042, skip: 13317, xfail: 1092

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 290 total, 268 passed, 22 failed
* arm64: 40 total, 40 passed, 0 failed
* dragonboard-410c: 2 total, 2 passed, 0 failed
* hi6220-hikey: 2 total, 2 passed, 0 failed
* i386: 40 total, 40 passed, 0 failed
* juno-r2: 2 total, 2 passed, 0 failed
* mips: 37 total, 37 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 45 total, 42 passed, 3 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 2 total, 2 passed, 0 failed
* x86: 2 total, 2 passed, 0 failed
* x86_64: 40 total, 40 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Shuah Khan]

On 11/10/21 11:43 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

RE: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Fox Chen]

On Wed, 10 Nov 2021 19:43:59 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.15.2-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Guenter Roeck]

On Wed, Nov 10, 2021 at 07:43:59PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 154 pass: 154 fail: 0
Qemu test results:
	total: 482 pass: 482 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.15 00/26] 5.15.2-rc1 review

[Jon Hunter]

On 10/11/2021 18:43, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.2 release.
> There are 26 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri, 12 Nov 2021 18:19:54 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.2-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


We are still seeing some failures for v5.15, but these are not regressions
and so can be ignored. So this update looks good to me.

Tested-by: Jon Hunter <jonathanh@nvidia.com>

I have now sent a revert of the offending change [0] and once this is
merged into the mainline, I will send a request for stable.

Jon


Test results for stable-v5.15:
     10 builds:	10 pass, 0 fail
     28 boots:	28 pass, 0 fail
     114 tests:	108 pass, 6 fail

Linux version:	5.15.2-rc1-g12d0445d66e0
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                 tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                 tegra20-ventana, tegra210-p2371-2180,
                 tegra210-p3450-0000, tegra30-cardhu-a04

Test failures:	tegra194-p2972-0000: boot.py
                 tegra194-p2972-0000: tegra-audio-boot-sanity.sh
                 tegra194-p2972-0000: tegra-audio-hda-playback.sh
                 tegra194-p3509-0000+p3668-0000: devices
                 tegra194-p3509-0000+p3668-0000: tegra-audio-boot-sanity.sh
                 tegra194-p3509-0000+p3668-0000: tegra-audio-hda-playback.sh

[0] https://patchwork.ozlabs.org/project/linux-tegra/patch/20211112112712.21587-1-jonathanh@nvidia.com/

-- 
nvpublic