From: "Pali Rohár" <pali@kernel.org>
To: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Marek Behún" <kabel@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 12/15] PCI: mvebu: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge
Date: Thu, 25 Nov 2021 13:46:02 +0100 [thread overview]
Message-ID: <20211125124605.25915-13-pali@kernel.org> (raw)
In-Reply-To: <20211125124605.25915-1-pali@kernel.org>
Hardware supports PCIe Hot Reset via PCIE_CTRL_OFF register. Use it for
implementing PCI_BRIDGE_CTL_BUS_RESET bit of PCI_BRIDGE_CONTROL register on
emulated bridge.
With this change the function pci_reset_secondary_bus() starts working and
can reset connected PCIe card.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 1f08673eef12 ("PCI: mvebu: Convert to PCI emulated bridge config space")
Cc: stable@vger.kernel.org
---
drivers/pci/controller/pci-mvebu.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 36fbdc4f0e06..3075ea98c131 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -57,6 +57,7 @@
#define PCIE_CTRL_OFF 0x1a00
#define PCIE_CTRL_X1_MODE 0x0001
#define PCIE_CTRL_RC_MODE BIT(1)
+#define PCIE_CTRL_MASTER_HOT_RESET BIT(24)
#define PCIE_STAT_OFF 0x1a04
#define PCIE_STAT_BUS 0xff00
#define PCIE_STAT_DEV 0x1f0000
@@ -509,6 +510,22 @@ mvebu_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
break;
}
+ case PCI_INTERRUPT_LINE: {
+ /*
+ * From the whole 32bit register we support reading from HW only
+ * one bit: PCI_BRIDGE_CTL_BUS_RESET.
+ * Other bits are retrieved only from emulated config buffer.
+ */
+ __le32 *cfgspace = (__le32 *)&bridge->conf;
+ u32 val = le32_to_cpu(cfgspace[PCI_INTERRUPT_LINE / 4]);
+ if (mvebu_readl(port, PCIE_CTRL_OFF) & PCIE_CTRL_MASTER_HOT_RESET)
+ val |= PCI_BRIDGE_CTL_BUS_RESET << 16;
+ else
+ val &= ~(PCI_BRIDGE_CTL_BUS_RESET << 16);
+ *value = val;
+ break;
+ }
+
default:
return PCI_BRIDGE_EMUL_NOT_HANDLED;
}
@@ -617,6 +634,17 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
mvebu_pcie_set_local_bus_nr(port, conf->secondary_bus);
break;
+ case PCI_INTERRUPT_LINE:
+ if (mask & (PCI_BRIDGE_CTL_BUS_RESET << 16)) {
+ u32 ctrl = mvebu_readl(port, PCIE_CTRL_OFF);
+ if (new & (PCI_BRIDGE_CTL_BUS_RESET << 16))
+ ctrl |= PCIE_CTRL_MASTER_HOT_RESET;
+ else
+ ctrl &= ~PCIE_CTRL_MASTER_HOT_RESET;
+ mvebu_writel(port, ctrl, PCIE_CTRL_OFF);
+ }
+ break;
+
default:
break;
}
--
2.20.1
next prev parent reply other threads:[~2021-11-25 12:49 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-25 12:45 [PATCH 00/15] pci: mvebu: Various fixes Pali Rohár
2021-11-25 12:45 ` [PATCH 01/15] PCI: mvebu: Check for valid ports Pali Rohár
2021-11-25 12:45 ` [PATCH 02/15] PCI: mvebu: Check for errors from pci_bridge_emul_init() call Pali Rohár
2021-11-25 12:45 ` [PATCH 03/15] PCI: mvebu: Check that PCI bridge specified in DT has function number zero Pali Rohár
2022-01-07 18:15 ` Bjorn Helgaas
2022-01-07 18:18 ` Pali Rohár
2022-01-07 21:09 ` Bjorn Helgaas
2022-01-07 21:58 ` Pali Rohár
2021-11-25 12:45 ` [PATCH 04/15] PCI: mvebu: Handle invalid size of read config request Pali Rohár
2022-01-07 18:45 ` Bjorn Helgaas
2022-01-07 19:15 ` Russell King (Oracle)
2021-11-25 12:45 ` [PATCH 05/15] PCI: mvebu: Disallow mapping interrupts on emulated bridges Pali Rohár
2022-01-07 21:32 ` Bjorn Helgaas
2022-01-07 22:13 ` Pali Rohár
2022-01-07 23:01 ` Bjorn Helgaas
2022-01-07 23:11 ` Pali Rohár
2021-11-25 12:45 ` [PATCH 06/15] PCI: mvebu: Fix support for bus mastering and PCI_COMMAND on emulated bridge Pali Rohár
2021-11-25 12:45 ` [PATCH 07/15] PCI: mvebu: Do not modify PCI IO type bits in conf_write Pali Rohár
2021-11-25 12:45 ` [PATCH 08/15] PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers Pali Rohár
2022-01-07 21:55 ` Bjorn Helgaas
2022-01-07 22:28 ` Pali Rohár
2022-01-07 23:16 ` Bjorn Helgaas
2022-01-07 23:46 ` Pali Rohár
2022-01-13 0:19 ` Bjorn Helgaas
2022-01-13 10:35 ` Pali Rohár
2022-01-20 17:50 ` Bjorn Helgaas
2022-01-20 19:08 ` Pali Rohár
2022-01-20 19:37 ` Bjorn Helgaas
2021-11-25 12:45 ` [PATCH 09/15] PCI: mvebu: Setup PCIe controller to Root Complex mode Pali Rohár
2021-11-25 12:46 ` [PATCH 10/15] PCI: mvebu: Set PCI Bridge Class Code to PCI Bridge Pali Rohár
2021-11-25 12:46 ` [PATCH 11/15] PCI: mvebu: Fix configuring secondary bus of PCIe Root Port via emulated bridge Pali Rohár
2021-11-25 12:46 ` Pali Rohár [this message]
2021-11-25 12:46 ` [PATCH 13/15] PCI: mvebu: Fix support for PCI_EXP_DEVCTL on " Pali Rohár
2021-11-25 12:46 ` [PATCH 14/15] PCI: mvebu: Fix support for PCI_EXP_RTSTA " Pali Rohár
2021-11-25 12:46 ` [PATCH 15/15] PCI: mvebu: Fix support for DEVCAP2, DEVCTL2 and LNKCTL2 registers " Pali Rohár
2022-01-04 15:04 ` [PATCH 00/15] pci: mvebu: Various fixes Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211125124605.25915-13-pali@kernel.org \
--to=pali@kernel.org \
--cc=bhelgaas@google.com \
--cc=kabel@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).