From: "Pali Rohár" <pali@kernel.org>
To: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Marek Behún" <kabel@kernel.org>
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 08/15] PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers
Date: Thu, 25 Nov 2021 13:45:58 +0100 [thread overview]
Message-ID: <20211125124605.25915-9-pali@kernel.org> (raw)
In-Reply-To: <20211125124605.25915-1-pali@kernel.org>
Properly propagate failure from mvebu_pcie_add_windows() function back to
the caller mvebu_pci_bridge_emul_base_conf_write() and correctly updates
PCI_IO_BASE, PCI_MEM_BASE and PCI_IO_BASE_UPPER16 registers on error.
On error set base value higher than limit value which indicates that
address range is disabled. When IO is unsupported then let IO registers
zeroed as required by PCIe base specification.
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
---
drivers/pci/controller/pci-mvebu.c | 82 ++++++++++++++++++++----------
1 file changed, 55 insertions(+), 27 deletions(-)
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index a0b661972436..12afa565bfcf 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -315,7 +315,7 @@ static void mvebu_pcie_del_windows(struct mvebu_pcie_port *port,
* areas each having a power of two size. We start from the largest
* one (i.e highest order bit set in the size).
*/
-static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
+static int mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
unsigned int target, unsigned int attribute,
phys_addr_t base, size_t size,
phys_addr_t remap)
@@ -336,7 +336,7 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
&base, &end, ret);
mvebu_pcie_del_windows(port, base - size_mapped,
size_mapped);
- return;
+ return ret;
}
size -= sz;
@@ -345,16 +345,20 @@ static void mvebu_pcie_add_windows(struct mvebu_pcie_port *port,
if (remap != MVEBU_MBUS_NO_REMAP)
remap += sz;
}
+
+ return 0;
}
-static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
+static int mvebu_pcie_set_window(struct mvebu_pcie_port *port,
unsigned int target, unsigned int attribute,
const struct mvebu_pcie_window *desired,
struct mvebu_pcie_window *cur)
{
+ int ret;
+
if (desired->base == cur->base && desired->remap == cur->remap &&
desired->size == cur->size)
- return;
+ return 0;
if (cur->size != 0) {
mvebu_pcie_del_windows(port, cur->base, cur->size);
@@ -369,30 +373,35 @@ static void mvebu_pcie_set_window(struct mvebu_pcie_port *port,
}
if (desired->size == 0)
- return;
+ return 0;
+
+ ret = mvebu_pcie_add_windows(port, target, attribute, desired->base,
+ desired->size, desired->remap);
+ if (ret) {
+ cur->size = 0;
+ cur->base = 0;
+ return ret;
+ }
- mvebu_pcie_add_windows(port, target, attribute, desired->base,
- desired->size, desired->remap);
*cur = *desired;
+ return 0;
}
-static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
+static int mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {};
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new iobase/iolimit values invalid? */
if (conf->iolimit < conf->iobase ||
- conf->iolimitupper < conf->iobaseupper) {
- mvebu_pcie_set_window(port, port->io_target, port->io_attr,
- &desired, &port->iowin);
- return;
- }
+ conf->iolimitupper < conf->iobaseupper)
+ return mvebu_pcie_set_window(port, port->io_target, port->io_attr,
+ &desired, &port->iowin);
if (!mvebu_has_ioport(port)) {
dev_WARN(&port->pcie->pdev->dev,
"Attempt to set IO when IO is disabled\n");
- return;
+ return -EOPNOTSUPP;
}
/*
@@ -410,21 +419,19 @@ static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port)
desired.remap) +
1;
- mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
- &port->iowin);
+ return mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired,
+ &port->iowin);
}
-static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
+static int mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
{
struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP};
struct pci_bridge_emul_conf *conf = &port->bridge.conf;
/* Are the new membase/memlimit values invalid? */
- if (conf->memlimit < conf->membase) {
- mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
- &desired, &port->memwin);
- return;
- }
+ if (conf->memlimit < conf->membase)
+ return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr,
+ &desired, &port->memwin);
/*
* We read the PCI-to-PCI bridge emulated registers, and
@@ -436,8 +443,8 @@ static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port)
desired.size = (((conf->memlimit & 0xFFF0) << 16) | 0xFFFFF) -
desired.base + 1;
- mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
- &port->memwin);
+ return mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired,
+ &port->memwin);
}
static pci_bridge_emul_read_status_t
@@ -522,15 +529,36 @@ mvebu_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
break;
case PCI_IO_BASE:
- mvebu_pcie_handle_iobase_change(port);
+ if ((mask & 0xffff) && mvebu_pcie_handle_iobase_change(port)) {
+ /* On error disable IO range */
+ conf->iobase &= ~0xf0;
+ conf->iolimit &= ~0xf0;
+ conf->iobaseupper = cpu_to_le16(0x0000);
+ conf->iolimitupper = cpu_to_le16(0x0000);
+ if (mvebu_has_ioport(port))
+ conf->iobase |= 0xf0;
+ }
break;
case PCI_MEMORY_BASE:
- mvebu_pcie_handle_membase_change(port);
+ if (mvebu_pcie_handle_membase_change(port)) {
+ /* On error disable mem range */
+ conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) & ~0xfff0);
+ conf->memlimit = cpu_to_le16(le16_to_cpu(conf->memlimit) & ~0xfff0);
+ conf->membase = cpu_to_le16(le16_to_cpu(conf->membase) | 0xfff0);
+ }
break;
case PCI_IO_BASE_UPPER16:
- mvebu_pcie_handle_iobase_change(port);
+ if (mvebu_pcie_handle_iobase_change(port)) {
+ /* On error disable IO range */
+ conf->iobase &= ~0xf0;
+ conf->iolimit &= ~0xf0;
+ conf->iobaseupper = cpu_to_le16(0x0000);
+ conf->iolimitupper = cpu_to_le16(0x0000);
+ if (mvebu_has_ioport(port))
+ conf->iobase |= 0xf0;
+ }
break;
case PCI_PRIMARY_BUS:
--
2.20.1
next prev parent reply other threads:[~2021-11-25 12:50 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-25 12:45 [PATCH 00/15] pci: mvebu: Various fixes Pali Rohár
2021-11-25 12:45 ` [PATCH 01/15] PCI: mvebu: Check for valid ports Pali Rohár
2021-11-25 12:45 ` [PATCH 02/15] PCI: mvebu: Check for errors from pci_bridge_emul_init() call Pali Rohár
2021-11-25 12:45 ` [PATCH 03/15] PCI: mvebu: Check that PCI bridge specified in DT has function number zero Pali Rohár
2022-01-07 18:15 ` Bjorn Helgaas
2022-01-07 18:18 ` Pali Rohár
2022-01-07 21:09 ` Bjorn Helgaas
2022-01-07 21:58 ` Pali Rohár
2021-11-25 12:45 ` [PATCH 04/15] PCI: mvebu: Handle invalid size of read config request Pali Rohár
2022-01-07 18:45 ` Bjorn Helgaas
2022-01-07 19:15 ` Russell King (Oracle)
2021-11-25 12:45 ` [PATCH 05/15] PCI: mvebu: Disallow mapping interrupts on emulated bridges Pali Rohár
2022-01-07 21:32 ` Bjorn Helgaas
2022-01-07 22:13 ` Pali Rohár
2022-01-07 23:01 ` Bjorn Helgaas
2022-01-07 23:11 ` Pali Rohár
2021-11-25 12:45 ` [PATCH 06/15] PCI: mvebu: Fix support for bus mastering and PCI_COMMAND on emulated bridge Pali Rohár
2021-11-25 12:45 ` [PATCH 07/15] PCI: mvebu: Do not modify PCI IO type bits in conf_write Pali Rohár
2021-11-25 12:45 ` Pali Rohár [this message]
2022-01-07 21:55 ` [PATCH 08/15] PCI: mvebu: Propagate errors when updating PCI_IO_BASE and PCI_MEM_BASE registers Bjorn Helgaas
2022-01-07 22:28 ` Pali Rohár
2022-01-07 23:16 ` Bjorn Helgaas
2022-01-07 23:46 ` Pali Rohár
2022-01-13 0:19 ` Bjorn Helgaas
2022-01-13 10:35 ` Pali Rohár
2022-01-20 17:50 ` Bjorn Helgaas
2022-01-20 19:08 ` Pali Rohár
2022-01-20 19:37 ` Bjorn Helgaas
2021-11-25 12:45 ` [PATCH 09/15] PCI: mvebu: Setup PCIe controller to Root Complex mode Pali Rohár
2021-11-25 12:46 ` [PATCH 10/15] PCI: mvebu: Set PCI Bridge Class Code to PCI Bridge Pali Rohár
2021-11-25 12:46 ` [PATCH 11/15] PCI: mvebu: Fix configuring secondary bus of PCIe Root Port via emulated bridge Pali Rohár
2021-11-25 12:46 ` [PATCH 12/15] PCI: mvebu: Fix support for PCI_BRIDGE_CTL_BUS_RESET on " Pali Rohár
2021-11-25 12:46 ` [PATCH 13/15] PCI: mvebu: Fix support for PCI_EXP_DEVCTL " Pali Rohár
2021-11-25 12:46 ` [PATCH 14/15] PCI: mvebu: Fix support for PCI_EXP_RTSTA " Pali Rohár
2021-11-25 12:46 ` [PATCH 15/15] PCI: mvebu: Fix support for DEVCAP2, DEVCTL2 and LNKCTL2 registers " Pali Rohár
2022-01-04 15:04 ` [PATCH 00/15] pci: mvebu: Various fixes Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211125124605.25915-9-pali@kernel.org \
--to=pali@kernel.org \
--cc=bhelgaas@google.com \
--cc=kabel@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).