[PATCH 0/5] arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups

[PATCH 0/5] arm64: dts: qcom: sc7x80: A smattering of misc dts cleanups

[Douglas Anderson]

There's nothing really holding this series together except that it
fixes a smattering of random dts stuff that I noticed recently. There
are no real dependencies other than the second "sdc" change depends on
the first.

Hopefully these look OK and can be applied quickly to avoid conflicts
with other work going on.

NOTE: if these changes land then my "herobrine-rev1" change definitely
needs to be re-posted. I've got that ready to go once we resolve the
cpufreq stuff.


Douglas Anderson (5):
  arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to
    pp3300_hub
  arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator"
    suffix
  arm64: dts: qcom: sc7280: Properly sort sdc pinctrl lines
  arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl
  arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrl

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi  |   2 +-
 .../qcom/sc7280-herobrine-herobrine-r0.dts    |  85 +++++-----
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  90 +++++-----
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 155 +++++++++---------
 4 files changed, 159 insertions(+), 173 deletions(-)

-- 
2.35.0.rc2.247.g8bbb082509-goog

[PATCH 1/5] arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to pp3300_hub

[Douglas Anderson]

All of the other fixed regulators have the "-regulator" suffix. Add it
to pp3300_hub to match.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 7d8bf66e8ffe..78296ed6fd29 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -284,7 +284,7 @@ pp3300_fp_tp: pp3300-fp-tp-regulator {
 		vin-supply = <&pp3300_a>;
 	};
 
-	pp3300_hub: pp3300-hub {
+	pp3300_hub: pp3300-hub-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_hub";
 
-- 
2.35.0.rc2.247.g8bbb082509-goog

[PATCH 2/5] arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator" suffix

[Douglas Anderson]

Some of the fixed regulators were missing the "-regulator" suffix. Add
it to be consistent within the file and consistent with the fixed
regulators in sc7180-trogdor.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 .../boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts  | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index ad4fe288b53c..f159b5a6d7ef 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -177,7 +177,7 @@ pp3300_tp: pp3300-tp-regulator {
 		vin-supply = <&pp3300_z1>;
 	};
 
-	pp2850_uf_cam: pp2850-uf-cam {
+	pp2850_uf_cam: pp2850-uf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp2850_uf_cam";
 
@@ -192,7 +192,7 @@ pp2850_uf_cam: pp2850-uf-cam {
 		vin-supply = <&pp3300_cam>;
 	};
 
-	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam {
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp2850_vcm_wf_cam";
 
@@ -207,7 +207,7 @@ pp2850_vcm_wf_cam: pp2850-vcm-wf-cam {
 		vin-supply = <&pp3300_cam>;
 	};
 
-	pp2850_wf_cam: pp2850-wf-cam {
+	pp2850_wf_cam: pp2850-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp2850_wf_cam";
 
@@ -251,7 +251,7 @@ pp1800_fp: pp1800-fp-regulator {
 		status = "disabled";
 	};
 
-	pp1800_uf_cam: pp1800-uf-cam {
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_uf_cam";
 
@@ -271,7 +271,7 @@ pp1800_uf_cam: pp1800-uf-cam {
 		vin-supply = <&pp1800_l19b>;
 	};
 
-	pp1800_wf_cam: pp1800-wf-cam {
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_wf_cam";
 
@@ -291,7 +291,7 @@ pp1800_wf_cam: pp1800-wf-cam {
 		vin-supply = <&pp1800_l19b>;
 	};
 
-	pp1200_wf_cam: pp1200-wf-cam {
+	pp1200_wf_cam: pp1200-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1200_wf_cam";
 
-- 
2.35.0.rc2.247.g8bbb082509-goog

[PATCH 3/5] arm64: dts: qcom: sc7280: Properly sort sdc pinctrl lines

[Douglas Anderson]

The sdc1 / sdc2 pinctrl lines were randomly stuffed in the middle of
the qup pinctrl lines. Sort them properly. This is a no-op
change. Just code movement.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7280.dtsi | 154 +++++++++++++--------------
 1 file changed, 77 insertions(+), 77 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index d4009cc0bb78..40cb414bc377 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3783,83 +3783,6 @@ qup_uart7_rx: qup-uart7-rx {
 				function = "qup07";
 			};
 
-			sdc1_on: sdc1-on {
-				clk {
-					pins = "sdc1_clk";
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-				};
-
-				data {
-					pins = "sdc1_data";
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins = "sdc1_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-					bias-bus-hold;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				clk {
-					pins = "sdc2_clk";
-				};
-
-				cmd {
-					pins = "sdc2_cmd";
-				};
-
-				data {
-					pins = "sdc2_data";
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins ="sdc2_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins ="sdc2_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-			};
-
 			qup_uart8_cts: qup-uart8-cts {
 				pins = "gpio32";
 				function = "qup10";
@@ -4019,6 +3942,83 @@ qup_uart15_rx: qup-uart15-rx {
 				pins = "gpio63";
 				function = "qup17";
 			};
+
+			sdc1_on: sdc1-on {
+				clk {
+					pins = "sdc1_clk";
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+				};
+
+				data {
+					pins = "sdc1_data";
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+				};
+			};
+
+			sdc1_off: sdc1-off {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
+
+			sdc2_on: sdc2-on {
+				clk {
+					pins = "sdc2_clk";
+				};
+
+				cmd {
+					pins = "sdc2_cmd";
+				};
+
+				data {
+					pins = "sdc2_data";
+				};
+			};
+
+			sdc2_off: sdc2-off {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd {
+					pins ="sdc2_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data {
+					pins ="sdc2_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		imem@146a5000 {
-- 
2.35.0.rc2.247.g8bbb082509-goog

[PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

[Douglas Anderson]

This patch makes a few improvements to the way that sdc1 / sdc2
pinctrl is specified on sc7280:

1. There's no reason to "group" the sdc pins into one overarching node
and there's a downside: we have to replicate the hierarchy in the
board device tree files. Let's clean this up.

2. There's really not a lot of reason not to list the "pinctrl" for
sdc1 (eMMC) in the SoC dtsi file. These aren't GPIO pins and
everyone's going to specify the same pins.

3. Even though it's likely that boards will need to override pinctrl
for sdc2 (SD card) to add the card detect GPIO, we can be symmetric
and add it to the SoC dsti file.

4. Let's get rid of the word "on" from the normal config and add a
"sleep" suffix to the sleep config. This looks cleaner to me.

This is intended to be a no-op change but it could plausibly change
behavior depending on how the pinctrl code parses things. One thing to
note is that "SD card detect" is explicitly listed now as keeping its
pull enabled in sleep since we still want to detect card insertions
even if the controller is suspended (because no card is inserted). The
pinctrl framework likely did this anyway, but it's nice to see it
explicit.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 .../qcom/sc7280-herobrine-herobrine-r0.dts    |  73 +++++------
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi      |  91 +++++++-------
 arch/arm64/boot/dts/qcom/sc7280.dtsi          | 119 +++++++++---------
 3 files changed, 135 insertions(+), 148 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
index f159b5a6d7ef..918352c097bc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -676,9 +676,6 @@ &qupv3_id_1 {
 &sdhc_1 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
 	vmmc-supply = <&pp2950_l7b>;
 	vqmmc-supply = <&pp1800_l19b>;
 };
@@ -686,9 +683,8 @@ &sdhc_1 {
 &sdhc_2 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
 	vmmc-supply = <&pp2950_l9c>;
 	vqmmc-supply = <&ppvar_l6c>;
 
@@ -883,47 +879,38 @@ &qup_uart7_rx {
 	bias-pull-up;
 };
 
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
 
-	rclk {
-		bias-pull-down;
-	};
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
+&sdc1_rclk {
+	bias-pull-down;
+};
 
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
 
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
 };
 
 /* PINCTRL - board-specific pinctrl */
@@ -1311,6 +1298,12 @@ qup_uart7_sleep_tx: qup-uart7-sleep-tx {
 		bias-pull-up;
 	};
 
+	sd_cd: sd-cd {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
 	tp_int_odl: tp-int-odl {
 		pins = "gpio102";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 78da9ac983db..7a987bc9b758 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -278,10 +278,6 @@ &qupv3_id_1 {
 &sdhc_1 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-
 	non-removable;
 	no-sd;
 	no-sdio;
@@ -293,9 +289,8 @@ &sdhc_1 {
 &sdhc_2 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
 
 	vmmc-supply = <&vreg_l9c_2p9>;
 	vqmmc-supply = <&vreg_l6c_2p9>;
@@ -424,6 +419,40 @@ &qup_uart7_rx {
 	bias-pull-up;
 };
 
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
 &tlmm {
 	bt_en: bt-en {
 		pins = "gpio85";
@@ -496,53 +525,17 @@ qup_uart7_sleep_rx: qup-uart7-sleep-rx {
 		bias-pull-up;
 	};
 
-	sw_ctrl: sw-ctrl {
-		pins = "gpio86";
+	sd_cd: sd-cd {
+		pins = "gpio91";
 		function = "gpio";
-		input-enable;
-		bias-pull-down;
-	};
-};
-
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
 		bias-pull-up;
-		drive-strength = <10>;
 	};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	rclk {
+	sw_ctrl: sw-ctrl {
+		pins = "gpio86";
+		function = "gpio";
+		input-enable;
 		bias-pull-down;
 	};
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 40cb414bc377..dc98a87e2871 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -616,6 +616,9 @@ qfprom: efuse@784000 {
 
 		sdhc_1: sdhci@7c4000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
+			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
 			status = "disabled";
 
 			reg = <0 0x007c4000 0 0x1000>,
@@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
 
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
 			status = "disabled";
 
 			reg = <0 0x08804000 0 0x1000>;
@@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
 				function = "qup17";
 			};
 
-			sdc1_on: sdc1-on {
-				clk {
-					pins = "sdc1_clk";
-				};
 
-				cmd {
-					pins = "sdc1_cmd";
-				};
 
-				data {
-					pins = "sdc1_data";
-				};
+			sdc1_clk: sdc1-clk {
+				pins = "sdc1_clk";
+			};
 
-				rclk {
-					pins = "sdc1_rclk";
-				};
+			sdc1_cmd: sdc1-cmd {
+				pins = "sdc1_cmd";
 			};
 
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_data: sdc1-data {
+				pins = "sdc1_data";
+			};
 
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_rclk: sdc1-rclk {
+				pins = "sdc1_rclk";
+			};
 
-				data {
-					pins = "sdc1_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc1_clk_sleep: sdc1-clk-sleep {
+				pins = "sdc1_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				rclk {
-					pins = "sdc1_rclk";
-					bias-bus-hold;
-				};
+			sdc1_cmd_sleep: sdc1-cmd-sleep {
+				pins = "sdc1_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
 			};
 
-			sdc2_on: sdc2-on {
-				clk {
-					pins = "sdc2_clk";
-				};
+			sdc1_data_sleep: sdc1-data-sleep {
+				pins = "sdc1_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				cmd {
-					pins = "sdc2_cmd";
-				};
+			sdc1_rclk_sleep: sdc1-rclk-sleep {
+				pins = "sdc1_rclk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 
-				data {
-					pins = "sdc2_data";
-				};
+			sdc2_clk: sdc2-clk {
+				pins = "sdc2_clk";
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_cmd: sdc2-cmd {
+				pins = "sdc2_cmd";
+			};
 
-				cmd {
-					pins ="sdc2_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_data: sdc2-data {
+				pins = "sdc2_data";
+			};
 
-				data {
-					pins ="sdc2_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
+			sdc2_clk_sleep: sdc2-clk-sleep {
+				pins = "sdc2_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_cmd_sleep: sdc2-cmd-sleep {
+				pins = "sdc2_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_data_sleep: sdc2-data-sleep {
+				pins = "sdc2_data";
+				drive-strength = <2>;
+				bias-bus-hold;
 			};
 		};
 
-- 
2.35.0.rc2.247.g8bbb082509-goog

[PATCH 5/5] arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrl

[Douglas Anderson]

Specifying "input-enable" on a MSM GPIO is a no-op for the most
part. The only thing it really does is to explicitly force the output
of a GPIO to be disabled right at the point of a pinctrl
transition. We don't need to do this and we don't typically specify
"input-enable" unless there's a good reason to. Remove it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 7a987bc9b758..23e656e51904 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -534,7 +534,6 @@ sd_cd: sd-cd {
 	sw_ctrl: sw-ctrl {
 		pins = "gpio86";
 		function = "gpio";
-		input-enable;
 		bias-pull-down;
 	};
 };
-- 
2.35.0.rc2.247.g8bbb082509-goog

Re: [PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

[Doug Anderson]

Hi,

On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 40cb414bc377..dc98a87e2871 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
>
>                 sdhc_1: sdhci@7c4000 {
>                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
>                         status = "disabled";
>
>                         reg = <0 0x007c4000 0 0x1000>,
> @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
>
>                 sdhc_2: sdhci@8804000 {
>                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
>                         status = "disabled";
>
>                         reg = <0 0x08804000 0 0x1000>;
> @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
>                                 function = "qup17";
>                         };
>
> -                       sdc1_on: sdc1-on {
> -                               clk {
> -                                       pins = "sdc1_clk";
> -                               };
>
> -                               cmd {
> -                                       pins = "sdc1_cmd";
> -                               };
>
> -                               data {
> -                                       pins = "sdc1_data";
> -                               };
> +                       sdc1_clk: sdc1-clk {

Ugh. I just noticed that there are way too many blank lines here in
the output. Happy to have this fixed when applying or I can post a v2.

-Doug

Re: [PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

[Bjorn Andersson]

On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:

> Hi,
> 
> On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index 40cb414bc377..dc98a87e2871 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> >
> >                 sdhc_1: sdhci@7c4000 {
> >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > +                       pinctrl-names = "default", "sleep";
> > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> >                         status = "disabled";
> >
> >                         reg = <0 0x007c4000 0 0x1000>,
> > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> >
> >                 sdhc_2: sdhci@8804000 {
> >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > +                       pinctrl-names = "default", "sleep";
> > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> >                         status = "disabled";
> >
> >                         reg = <0 0x08804000 0 0x1000>;
> > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> >                                 function = "qup17";
> >                         };
> >
> > -                       sdc1_on: sdc1-on {
> > -                               clk {
> > -                                       pins = "sdc1_clk";
> > -                               };
> >
> > -                               cmd {
> > -                                       pins = "sdc1_cmd";
> > -                               };
> >
> > -                               data {
> > -                                       pins = "sdc1_data";
> > -                               };
> > +                       sdc1_clk: sdc1-clk {
> 
> Ugh. I just noticed that there are way too many blank lines here in
> the output. Happy to have this fixed when applying or I can post a v2.
> 

I can fix that up as I apply it. Will let it sit for a few days to
attract reviews first though.

Regards,
Bjorn

Re: [PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

[Doug Anderson]

Hi,

On Mon, Jan 31, 2022 at 4:33 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:
>
> > Hi,
> >
> > On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > index 40cb414bc377..dc98a87e2871 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> > >
> > >                 sdhc_1: sdhci@7c4000 {
> > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > +                       pinctrl-names = "default", "sleep";
> > > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> > >                         status = "disabled";
> > >
> > >                         reg = <0 0x007c4000 0 0x1000>,
> > > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> > >
> > >                 sdhc_2: sdhci@8804000 {
> > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > +                       pinctrl-names = "default", "sleep";
> > > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> > >                         status = "disabled";
> > >
> > >                         reg = <0 0x08804000 0 0x1000>;
> > > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> > >                                 function = "qup17";
> > >                         };
> > >
> > > -                       sdc1_on: sdc1-on {
> > > -                               clk {
> > > -                                       pins = "sdc1_clk";
> > > -                               };
> > >
> > > -                               cmd {
> > > -                                       pins = "sdc1_cmd";
> > > -                               };
> > >
> > > -                               data {
> > > -                                       pins = "sdc1_data";
> > > -                               };
> > > +                       sdc1_clk: sdc1-clk {
> >
> > Ugh. I just noticed that there are way too many blank lines here in
> > the output. Happy to have this fixed when applying or I can post a v2.
> >
>
> I can fix that up as I apply it. Will let it sit for a few days to
> attract reviews first though.

Sounds good. Thanks! I might end up sending a v2 anyway since I found
a few more fixups, but I'll at least wait a day or two so I don't spam
people too hard.

-Doug

Re: [PATCH 1/5] arm64: dts: qcom: sc7180-trogdor: Add "-regulator" suffix to pp3300_hub

[Matthias Kaehlcke]

On Mon, Jan 31, 2022 at 04:10:38PM -0800, Douglas Anderson wrote:
> All of the other fixed regulators have the "-regulator" suffix. Add it
> to pp3300_hub to match.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH 2/5] arm64: dts: qcom: sc7280-herobrine: Consistently add "-regulator" suffix

[Matthias Kaehlcke]

On Mon, Jan 31, 2022 at 04:10:39PM -0800, Douglas Anderson wrote:
> Some of the fixed regulators were missing the "-regulator" suffix. Add
> it to be consistent within the file and consistent with the fixed
> regulators in sc7180-trogdor.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH 3/5] arm64: dts: qcom: sc7280: Properly sort sdc pinctrl lines

[Matthias Kaehlcke]

On Mon, Jan 31, 2022 at 04:10:40PM -0800, Douglas Anderson wrote:
> The sdc1 / sdc2 pinctrl lines were randomly stuffed in the middle of
> the qup pinctrl lines. Sort them properly. This is a no-op
> change. Just code movement.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH 5/5] arm64: dts: qcom: sc7280-idp: No need for "input-enable" on sw_ctrl

[Matthias Kaehlcke]

On Mon, Jan 31, 2022 at 04:10:42PM -0800, Douglas Anderson wrote:
> Specifying "input-enable" on a MSM GPIO is a no-op for the most
> part. The only thing it really does is to explicitly force the output
> of a GPIO to be disabled right at the point of a pinctrl
> transition. We don't need to do this and we don't typically specify
> "input-enable" unless there's a good reason to. Remove it.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

Re: [PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl

[Doug Anderson]

Hi,

On Mon, Jan 31, 2022 at 4:34 PM Doug Anderson <dianders@chromium.org> wrote:
>
> Hi,
>
> On Mon, Jan 31, 2022 at 4:33 PM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:
> >
> > > Hi,
> > >
> > > On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@chromium.org> wrote:
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > index 40cb414bc377..dc98a87e2871 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > > @@ -616,6 +616,9 @@ qfprom: efuse@784000 {
> > > >
> > > >                 sdhc_1: sdhci@7c4000 {
> > > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > > +                       pinctrl-names = "default", "sleep";
> > > > +                       pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > > > +                       pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> > > >                         status = "disabled";
> > > >
> > > >                         reg = <0 0x007c4000 0 0x1000>,
> > > > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> > > >
> > > >                 sdhc_2: sdhci@8804000 {
> > > >                         compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > > +                       pinctrl-names = "default", "sleep";
> > > > +                       pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > > > +                       pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> > > >                         status = "disabled";
> > > >
> > > >                         reg = <0 0x08804000 0 0x1000>;
> > > > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> > > >                                 function = "qup17";
> > > >                         };
> > > >
> > > > -                       sdc1_on: sdc1-on {
> > > > -                               clk {
> > > > -                                       pins = "sdc1_clk";
> > > > -                               };
> > > >
> > > > -                               cmd {
> > > > -                                       pins = "sdc1_cmd";
> > > > -                               };
> > > >
> > > > -                               data {
> > > > -                                       pins = "sdc1_data";
> > > > -                               };
> > > > +                       sdc1_clk: sdc1-clk {
> > >
> > > Ugh. I just noticed that there are way too many blank lines here in
> > > the output. Happy to have this fixed when applying or I can post a v2.
> > >
> >
> > I can fix that up as I apply it. Will let it sit for a few days to
> > attract reviews first though.
>
> Sounds good. Thanks! I might end up sending a v2 anyway since I found
> a few more fixups, but I'll at least wait a day or two so I don't spam
> people too hard.

Breadcrumbs: I ended up sending out a v2 (tagged as v3 for other
reasons) that fixes this.

https://lore.kernel.org/r/20220202132301.v3.4.I79baad7f52351aafb470f8b21a9fa79d7031ad6a@changeid/

-Doug