[PATCH v5 15/15] ARM: dts: qcom: add syscon and cxo/pxo clock to gcc node for ipq8064

[Ansuel Smith <ansuelsmth@gmail.com>]

Add syscon compatible required for tsens driver to correctly probe driver
and access the reg. Also add cxo and pxo tag and declare them as gcc clock
now requires them for the ipq8064 gcc driver that has now been modernized.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 11481313bdb6..5524a68cf3d1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,13 +298,13 @@ smem: smem@41000000 {
 	};
 
 	clocks {
-		cxo_board {
+		cxo_board: cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <25000000>;
@@ -736,7 +736,9 @@ tsens_calib_backup: calib_backup@410 {
 		};
 
 		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
+			compatible = "qcom,gcc-ipq8064", "syscon";
+			clocks = <&pxo_board>, <&cxo_board>;
+			clock-names = "pxo", "cxo";
 			reg = <0x00900000 0x4000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-- 
2.34.1