From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Rob Herring <robh+dt@kernel.org>, Andy Gross <agross@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] arm64: dts: qcom: sm8350: move qup-opp-tables out of soc node
Date: Mon, 28 Mar 2022 20:00:31 +0530 [thread overview]
Message-ID: <20220328143035.519909-3-vkoul@kernel.org> (raw)
In-Reply-To: <20220328143035.519909-1-vkoul@kernel.org>
The soc node expects all the nodes to have unit addresses. The
qup-opp-tables do not have that which causes warnings:
arch/arm64/boot/dts/qcom/sm8350.dtsi:640.46-657.5:
Warning (simple_bus_reg): /soc@0/qup-100mhz-opp-table:
missing or empty reg/ranges property
arch/arm64/boot/dts/qcom/sm8350.dtsi:659.46-676.5:
Warning (simple_bus_reg): /soc@0/qup-120mhz-opp-table:
missing or empty reg/ranges property
Move the qup-opp-tables out of soc node to fix these warnings
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 76 ++++++++++++++--------------
1 file changed, 38 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index d242bab69c2e..846ddd290d08 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -340,6 +340,44 @@ CLUSTER_PD: cpu-cluster0 {
};
};
+ qup_opp_table_100mhz: qup-100mhz-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
+ qup_opp_table_120mhz: qup-120mhz-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-120000000 {
+ opp-hz = /bits/ 64 <120000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -637,44 +675,6 @@ ipcc: mailbox@408000 {
#mbox-cells = <2>;
};
- qup_opp_table_100mhz: qup-100mhz-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
- qup_opp_table_120mhz: qup-120mhz-opp-table {
- compatible = "operating-points-v2";
-
- opp-50000000 {
- opp-hz = /bits/ 64 <50000000>;
- required-opps = <&rpmhpd_opp_min_svs>;
- };
-
- opp-75000000 {
- opp-hz = /bits/ 64 <75000000>;
- required-opps = <&rpmhpd_opp_low_svs>;
- };
-
- opp-120000000 {
- opp-hz = /bits/ 64 <120000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
- };
-
qupv3_id_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
--
2.34.1
next prev parent reply other threads:[~2022-03-28 14:31 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-28 14:30 [PATCH 0/6] arm64: dts: qcom: Get rid of some warnings Vinod Koul
2022-03-28 14:30 ` [PATCH 1/6] arm64: dts: qcom: sm8450: rename interconnect nodes Vinod Koul
2022-03-28 15:07 ` Krzysztof Kozlowski
2022-03-28 17:11 ` Vinod Koul
2022-03-28 14:30 ` Vinod Koul [this message]
2022-03-28 15:08 ` [PATCH 2/6] arm64: dts: qcom: sm8350: move qup-opp-tables out of soc node Krzysztof Kozlowski
2022-03-28 14:30 ` [PATCH 3/6] arm64: dts: qcom: sm8250: move qup-opp-table " Vinod Koul
2022-03-28 15:08 ` Krzysztof Kozlowski
2022-03-28 14:30 ` [PATCH 4/6] arm64: dts: qcom: sm8250: move sound node out of soc Vinod Koul
2022-03-28 15:14 ` Krzysztof Kozlowski
2022-03-28 17:14 ` Vinod Koul
2022-03-28 17:16 ` Krzysztof Kozlowski
2022-04-09 0:25 ` Bjorn Andersson
2022-03-28 14:30 ` [PATCH 5/6] arm64: dts: qcom: sm8250: move wcd938x node out of soc node Vinod Koul
2022-03-28 15:21 ` Krzysztof Kozlowski
2022-03-28 17:13 ` Vinod Koul
2022-03-29 8:44 ` Srinivas Kandagatla
2022-03-28 14:30 ` [PATCH 6/6] arm64: dts: qcom: sm8250: remove address cells from dsi nodes Vinod Koul
2022-03-28 15:31 ` Krzysztof Kozlowski
2022-03-28 15:54 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220328143035.519909-3-vkoul@kernel.org \
--to=vkoul@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).