* [PATCH 1/2] arm64: dts: qcom: sm6350: Fix naming of uart9
@ 2022-04-08 11:42 Luca Weiss
2022-04-08 11:42 ` [PATCH 2/2] arm64: dts: qcom: sm6350: Add I2C busses Luca Weiss
0 siblings, 1 reply; 2+ messages in thread
From: Luca Weiss @ 2022-04-08 11:42 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, devicetree,
linux-kernel
The uart9 was previously mistakenly called uart2. Fix this.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 6 +++---
arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts | 4 ++--
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d7c9edff19f7..ef43af39569c 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -529,13 +529,13 @@ qupv3_id_1: geniqup@9c0000 {
ranges;
status = "disabled";
- uart2: serial@98c000 {
+ uart9: serial@98c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x98c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
pinctrl-names = "default";
- pinctrl-0 = <&qup_uart2_default>;
+ pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -974,7 +974,7 @@ tlmm: pinctrl@f100000 {
#interrupt-cells = <2>;
gpio-ranges = <&tlmm 0 0 157>;
- qup_uart2_default: qup-uart2-default {
+ qup_uart9_default: qup-uart9-default {
pins = "gpio25", "gpio26";
function = "qup13_f2";
drive-strength = <2>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index adb6ca2be2a5..67d14bda3797 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -23,7 +23,7 @@ / {
qcom,board-id = <8 32>;
aliases {
- serial0 = &uart2;
+ serial0 = &uart9;
};
chosen {
@@ -332,7 +332,7 @@ &tlmm {
gpio-reserved-ranges = <13 4>, <56 2>;
};
-&uart2 {
+&uart9 {
status = "okay";
};
--
2.35.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: sm6350: Add I2C busses
2022-04-08 11:42 [PATCH 1/2] arm64: dts: qcom: sm6350: Fix naming of uart9 Luca Weiss
@ 2022-04-08 11:42 ` Luca Weiss
0 siblings, 0 replies; 2+ messages in thread
From: Luca Weiss @ 2022-04-08 11:42 UTC (permalink / raw)
To: linux-arm-msm
Cc: ~postmarketos/upstreaming, phone-devel, Luca Weiss, Andy Gross,
Bjorn Andersson, Rob Herring, Krzysztof Kozlowski, devicetree,
linux-kernel
Add nodes for the I2C busses on sm6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
arch/arm64/boot/dts/qcom/sm6350.dtsi | 134 +++++++++++++++++++++++++++
1 file changed, 134 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index ef43af39569c..81db25952cf1 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -517,6 +517,45 @@ opp-384000000 {
};
};
+ qupv3_id_0: geniqup@8c0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x8c0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ iommus = <&apps_smmu 0x43 0x0>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@880000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00880000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@888000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00888000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
qupv3_id_1: geniqup@9c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x9c0000 0x0 0x2000>;
@@ -529,6 +568,45 @@ qupv3_id_1: geniqup@9c0000 {
ranges;
status = "disabled";
+ i2c6: i2c@980000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00980000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c6_default>;
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@984000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00984000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c7_default>;
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@988000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00988000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
uart9: serial@98c000 {
compatible = "qcom,geni-debug-uart";
reg = <0 0x98c000 0 0x4000>;
@@ -539,6 +617,20 @@ uart9: serial@98c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+
+ i2c10: i2c@990000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0 0x00990000 0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
};
tcsr_mutex: hwlock@1f40000 {
@@ -980,6 +1072,48 @@ qup_uart9_default: qup-uart9-default {
drive-strength = <2>;
bias-disable;
};
+
+ qup_i2c0_default: qup-i2c0-default {
+ pins = "gpio0", "gpio1";
+ function = "qup00";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c2_default: qup-i2c2-default {
+ pins = "gpio45", "gpio46";
+ function = "qup02";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c6_default: qup-i2c6-default {
+ pins = "gpio13", "gpio14";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c7_default: qup-i2c7-default {
+ pins = "gpio27", "gpio28";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c8_default: qup-i2c8-default {
+ pins = "gpio19", "gpio20";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ qup_i2c10_default: qup-i2c10-default {
+ pins = "gpio4", "gpio5";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};
apps_smmu: iommu@15000000 {
--
2.35.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-08 11:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-08 11:42 [PATCH 1/2] arm64: dts: qcom: sm6350: Fix naming of uart9 Luca Weiss
2022-04-08 11:42 ` [PATCH 2/2] arm64: dts: qcom: sm6350: Add I2C busses Luca Weiss
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).