linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jung Daehwan <dh10.jung@samsung.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>,
	"open list:USB XHCI DRIVER" <linux-usb@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	Howard Yen <howardyen@google.com>,
	Jack Pham <jackp@codeaurora.org>, Puma Hsu <pumahsu@google.com>,
	"J . Avila" <elavila@google.com>,
	sc.suh@samsung.com,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Subject: Re: [PATCH v4 2/5] usb: host: add xhci hooks for xhci-exynos
Date: Wed, 27 Apr 2022 18:06:17 +0900	[thread overview]
Message-ID: <20220427090617.GA145620@ubuntu> (raw)
In-Reply-To: <YmfHJYu9lIwz8JT5@kroah.com>

[-- Attachment #1: Type: text/plain, Size: 23527 bytes --]

On Tue, Apr 26, 2022 at 12:19:17PM +0200, Greg Kroah-Hartman wrote:
> On Tue, Apr 26, 2022 at 06:18:45PM +0900, Daehwan Jung wrote:
> > To enable supporting for USB offload, define "offload" in usb controller
> > node of device tree. "offload" value can be used to determine which type
> > of offload was been enabled in the SoC.
> > 
> > For example:
> > 
> > &usbdrd_dwc3 {
> > 	...
> > 	/* support usb offloading, 0: disabled, 1: audio */
> > 	offload = <1>;
> > 	...
> > };
> > 
> > There are several vendor_ops introduced by this patch:
> > 
> > struct xhci_vendor_ops - function callbacks for vendor specific operations
> > {
> > 	@vendor_init:
> > 		- called for vendor init process during xhci-plat-hcd
> > 		  probe.
> > 	@vendor_cleanup:
> > 		- called for vendor cleanup process during xhci-plat-hcd
> > 		  remove.
> > 	@is_usb_offload_enabled:
> > 		- called to check if usb offload enabled.
> > 	@alloc_dcbaa:
> > 		- called when allocating vendor specific dcbaa during
> > 		  memory initializtion.
> > 	@free_dcbaa:
> > 		- called to free vendor specific dcbaa when cleanup the
> > 		  memory.
> > 	@alloc_transfer_ring:
> > 		- called when vendor specific transfer ring allocation is required
> > 	@free_transfer_ring:
> > 		- called to free vendor specific transfer ring
> > 	@sync_dev_ctx:
> > 		- called when synchronization for device context is required
> > }
> > 
> > The xhci hooks with prefix "xhci_vendor_" on the ops in xhci_vendor_ops.
> > For example, vendor_init ops will be invoked by xhci_vendor_init() hook,
> > is_usb_offload_enabled ops will be invoked by
> > xhci_vendor_is_usb_offload_enabled(), and so on.
> > 
> > Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
> > Signed-off-by: J. Avila <elavila@google.com>
> > Signed-off-by: Puma Hsu <pumahsu@google.com>
> > Signed-off-by: Howard Yen <howardyen@google.com>
> > ---
> >  drivers/usb/host/xhci-hub.c  |   5 ++
> >  drivers/usb/host/xhci-mem.c  | 131 +++++++++++++++++++++++++++++++----
> >  drivers/usb/host/xhci-plat.c |  44 +++++++++++-
> >  drivers/usb/host/xhci-plat.h |   8 +++
> >  drivers/usb/host/xhci.c      |  80 ++++++++++++++++++++-
> >  drivers/usb/host/xhci.h      |  46 ++++++++++++
> >  6 files changed, 296 insertions(+), 18 deletions(-)
> 
> Why do you need to "override" anything?  Why can't these just be added
> to the current xhci_plat_priv structure and used that way like the
> current xhci platform interface works?
> 

"override" means above xhci hooks? Above hooks are for ring management.
In fact, xhci platform doesn't care ring management. That's why I've added hooks
not used xhci_plat_priv.

> > 
> > diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
> > index 841617952ac7..e07c9c132061 100644
> > --- a/drivers/usb/host/xhci-hub.c
> > +++ b/drivers/usb/host/xhci-hub.c
> > @@ -535,8 +535,13 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
> >  	    cmd->status == COMP_COMMAND_RING_STOPPED) {
> >  		xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
> >  		ret = -ETIME;
> > +		goto cmd_cleanup;
> >  	}
> >  
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, slot_id);
> > +	if (ret)
> > +		xhci_warn(xhci, "Sync device context failed, ret=%d\n", ret);
> 
> Shouldn't the function have spit out an error if there was a problem?

It just reads and sync information about device context. That's why I think
it's not critical to go error routime. But it needs to discuss.

> 
> > +
> >  cmd_cleanup:
> >  	xhci_free_command(xhci, cmd);
> >  	return ret;
> > diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> > index 82b9f90c0f27..5ee0ffb676d3 100644
> > --- a/drivers/usb/host/xhci-mem.c
> > +++ b/drivers/usb/host/xhci-mem.c
> > @@ -365,6 +365,54 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci,
> >  	return 0;
> >  }
> >  
> > +static void xhci_vendor_free_container_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->free_container_ctx)
> > +		ops->free_container_ctx(xhci, ctx);
> > +}
> > +
> > +static void xhci_vendor_alloc_container_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx,
> > +					    int type, gfp_t flags)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->alloc_container_ctx)
> > +		ops->alloc_container_ctx(xhci, ctx, type, flags);
> > +}
> > +
> > +static struct xhci_ring *xhci_vendor_alloc_transfer_ring(struct xhci_hcd *xhci,
> > +		u32 endpoint_type, enum xhci_ring_type ring_type,
> > +		unsigned int max_packet, gfp_t mem_flags)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->alloc_transfer_ring)
> > +		return ops->alloc_transfer_ring(xhci, endpoint_type, ring_type,
> > +				max_packet, mem_flags);
> > +	return 0;
> > +}
> > +
> > +void xhci_vendor_free_transfer_ring(struct xhci_hcd *xhci,
> > +		struct xhci_ring *ring, unsigned int ep_index)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->free_transfer_ring)
> > +		ops->free_transfer_ring(xhci, ring, ep_index);
> > +}
> > +
> > +bool xhci_vendor_is_usb_offload_enabled(struct xhci_hcd *xhci,
> > +		struct xhci_virt_device *virt_dev, unsigned int ep_index)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->is_usb_offload_enabled)
> > +		return ops->is_usb_offload_enabled(xhci, virt_dev, ep_index);
> > +	return false;
> > +}
> > +
> >  /*
> >   * Create a new ring with zero or more segments.
> >   *
> > @@ -417,7 +465,11 @@ void xhci_free_endpoint_ring(struct xhci_hcd *xhci,
> >  		struct xhci_virt_device *virt_dev,
> >  		unsigned int ep_index)
> >  {
> > -	xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, virt_dev, ep_index))
> > +		xhci_vendor_free_transfer_ring(xhci, virt_dev->eps[ep_index].ring, ep_index);
> > +	else
> > +		xhci_ring_free(xhci, virt_dev->eps[ep_index].ring);
> > +
> >  	virt_dev->eps[ep_index].ring = NULL;
> >  }
> >  
> > @@ -475,6 +527,7 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
> >  {
> >  	struct xhci_container_ctx *ctx;
> >  	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> >  
> >  	if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT))
> >  		return NULL;
> > @@ -488,7 +541,12 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
> >  	if (type == XHCI_CTX_TYPE_INPUT)
> >  		ctx->size += CTX_SIZE(xhci->hcc_params);
> >  
> > -	ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, NULL, 0) &&
> > +	    (ops && ops->alloc_container_ctx))
> > +		xhci_vendor_alloc_container_ctx(xhci, ctx, type, flags);
> > +	else
> > +		ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
> > +
> >  	if (!ctx->bytes) {
> >  		kfree(ctx);
> >  		return NULL;
> > @@ -499,9 +557,16 @@ struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
> >  void xhci_free_container_ctx(struct xhci_hcd *xhci,
> >  			     struct xhci_container_ctx *ctx)
> >  {
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> >  	if (!ctx)
> >  		return;
> > -	dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, NULL, 0) &&
> > +	    (ops && ops->free_container_ctx))
> > +		xhci_vendor_free_container_ctx(xhci, ctx);
> > +	else
> > +		dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
> > +
> >  	kfree(ctx);
> >  }
> >  
> > @@ -894,7 +959,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
> >  
> >  	for (i = 0; i < 31; i++) {
> >  		if (dev->eps[i].ring)
> > -			xhci_ring_free(xhci, dev->eps[i].ring);
> > +			xhci_free_endpoint_ring(xhci, dev, i);
> >  		if (dev->eps[i].stream_info)
> >  			xhci_free_stream_info(xhci,
> >  					dev->eps[i].stream_info);
> > @@ -1492,8 +1557,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
> >  		mult = 0;
> >  
> >  	/* Set up the endpoint ring */
> > -	virt_dev->eps[ep_index].new_ring =
> > -		xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, virt_dev, ep_index) &&
> > +	    usb_endpoint_xfer_isoc(&ep->desc)) {
> > +		virt_dev->eps[ep_index].new_ring =
> > +			xhci_vendor_alloc_transfer_ring(xhci, endpoint_type, ring_type,
> > +							max_packet, mem_flags);
> > +	} else {
> > +		virt_dev->eps[ep_index].new_ring =
> > +			xhci_ring_alloc(xhci, 2, 1, ring_type, max_packet, mem_flags);
> > +	}
> > +
> >  	if (!virt_dev->eps[ep_index].new_ring)
> >  		return -ENOMEM;
> >  
> > @@ -1837,6 +1910,24 @@ void xhci_free_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
> >  	erst->entries = NULL;
> >  }
> >  
> > +static struct xhci_device_context_array *xhci_vendor_alloc_dcbaa(
> > +		struct xhci_hcd *xhci, gfp_t flags)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->alloc_dcbaa)
> > +		return ops->alloc_dcbaa(xhci, flags);
> > +	return 0;
> > +}
> > +
> > +static void xhci_vendor_free_dcbaa(struct xhci_hcd *xhci)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->free_dcbaa)
> > +		ops->free_dcbaa(xhci);
> > +}
> > +
> >  void xhci_mem_cleanup(struct xhci_hcd *xhci)
> >  {
> >  	struct device	*dev = xhci_to_hcd(xhci)->self.sysdev;
> > @@ -1888,9 +1979,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
> >  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
> >  			"Freed medium stream array pool");
> >  
> > -	if (xhci->dcbaa)
> > -		dma_free_coherent(dev, sizeof(*xhci->dcbaa),
> > -				xhci->dcbaa, xhci->dcbaa->dma);
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, NULL, 0)) {
> > +		xhci_vendor_free_dcbaa(xhci);
> > +	} else {
> > +		if (xhci->dcbaa)
> > +			dma_free_coherent(dev, sizeof(*xhci->dcbaa),
> > +					xhci->dcbaa, xhci->dcbaa->dma);
> > +	}
> >  	xhci->dcbaa = NULL;
> >  
> >  	scratchpad_free(xhci);
> > @@ -2427,15 +2522,21 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
> >  	 * xHCI section 5.4.6 - Device Context array must be
> >  	 * "physically contiguous and 64-byte (cache line) aligned".
> >  	 */
> > -	xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
> > -			flags);
> > -	if (!xhci->dcbaa)
> > -		goto fail;
> > -	xhci->dcbaa->dma = dma;
> > +	if (xhci_vendor_is_usb_offload_enabled(xhci, NULL, 0)) {
> > +		xhci->dcbaa = xhci_vendor_alloc_dcbaa(xhci, flags);
> > +		if (!xhci->dcbaa)
> > +			goto fail;
> > +	} else {
> > +		xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma,
> > +				flags);
> > +		if (!xhci->dcbaa)
> > +			goto fail;
> > +		xhci->dcbaa->dma = dma;
> > +	}
> >  	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
> >  			"// Device context base array address = 0x%llx (DMA), %p (virt)",
> >  			(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
> > -	xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
> > +	xhci_write_64(xhci, xhci->dcbaa->dma, &xhci->op_regs->dcbaa_ptr);
> >  
> >  	/*
> >  	 * Initialize the ring segment pool.  The ring must be a contiguous
> > diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> > index 649ffd861b44..a5881ff945a6 100644
> > --- a/drivers/usb/host/xhci-plat.c
> > +++ b/drivers/usb/host/xhci-plat.c
> > @@ -173,6 +173,41 @@ static const struct of_device_id usb_xhci_of_match[] = {
> >  MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
> >  #endif
> >  
> > +static struct xhci_plat_priv_overwrite xhci_plat_vendor_overwrite;
> > +
> > +int xhci_plat_register_vendor_ops(struct xhci_vendor_ops *vendor_ops)
> > +{
> > +	if (vendor_ops == NULL)
> > +		return -EINVAL;
> > +
> > +	xhci_plat_vendor_overwrite.vendor_ops = vendor_ops;
> > +
> > +	return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(xhci_plat_register_vendor_ops);
> > +
> > +static int xhci_vendor_init(struct xhci_hcd *xhci, struct device *dev)
> > +{
> > +	struct xhci_vendor_ops *ops = NULL;
> > +
> > +	if (xhci_plat_vendor_overwrite.vendor_ops)
> > +		ops = xhci->vendor_ops = xhci_plat_vendor_overwrite.vendor_ops;
> > +
> > +	if (ops && ops->vendor_init)
> > +		return ops->vendor_init(xhci, dev);
> > +	return 0;
> > +}
> > +
> > +static void xhci_vendor_cleanup(struct xhci_hcd *xhci)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->vendor_cleanup)
> > +		ops->vendor_cleanup(xhci);
> > +
> > +	xhci->vendor_ops = NULL;
> > +}
> > +
> >  static int xhci_plat_probe(struct platform_device *pdev)
> >  {
> >  	const struct xhci_plat_priv *priv_match;
> > @@ -185,7 +220,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
> >  	int			irq;
> >  	struct xhci_plat_priv	*priv = NULL;
> >  
> > -
> >  	if (usb_disabled())
> >  		return -ENODEV;
> >  
> > @@ -321,6 +355,10 @@ static int xhci_plat_probe(struct platform_device *pdev)
> >  			goto put_usb3_hcd;
> >  	}
> >  
> > +	ret = xhci_vendor_init(xhci, &pdev->dev);
> > +	if (ret)
> > +		goto disable_usb_phy;
> > +
> >  	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);
> >  	xhci->shared_hcd->tpl_support = hcd->tpl_support;
> >  	if (priv && (priv->quirks & XHCI_SKIP_PHY_INIT))
> > @@ -393,8 +431,10 @@ static int xhci_plat_remove(struct platform_device *dev)
> >  	usb_phy_shutdown(hcd->usb_phy);
> >  
> >  	usb_remove_hcd(hcd);
> > -	usb_put_hcd(shared_hcd);
> >  
> > +	xhci_vendor_cleanup(xhci);
> > +
> > +	usb_put_hcd(shared_hcd);
> >  	clk_disable_unprepare(clk);
> >  	clk_disable_unprepare(reg_clk);
> >  	usb_put_hcd(hcd);
> > diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
> > index 1fb149d1fbce..8c204f3234d8 100644
> > --- a/drivers/usb/host/xhci-plat.h
> > +++ b/drivers/usb/host/xhci-plat.h
> > @@ -17,8 +17,16 @@ struct xhci_plat_priv {
> >  	int (*init_quirk)(struct usb_hcd *);
> >  	int (*suspend_quirk)(struct usb_hcd *);
> >  	int (*resume_quirk)(struct usb_hcd *);
> > +	void *vendor_priv;
> >  };
> >  
> >  #define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
> >  #define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
> > +
> > +struct xhci_plat_priv_overwrite {
> > +	struct xhci_vendor_ops *vendor_ops;
> > +};
> > +
> > +int xhci_plat_register_vendor_ops(struct xhci_vendor_ops *vendor_ops);
> > +
> >  #endif	/* _XHCI_PLAT_H */
> > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > index c06e8b21b724..5ccf1bbe8732 100644
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -2986,6 +2986,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
> >  			xhci_finish_resource_reservation(xhci, ctrl_ctx);
> >  		spin_unlock_irqrestore(&xhci->lock, flags);
> >  	}
> > +	if (ret)
> > +		goto failed;
> > +
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, udev->slot_id);
> > +	if (ret)
> > +		xhci_warn(xhci, "sync device context failed, ret=%d", ret);
> > +
> > +failed:
> >  	return ret;
> >  }
> >  
> > @@ -3129,7 +3137,11 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
> >  	for (i = 0; i < 31; i++) {
> >  		if (virt_dev->eps[i].new_ring) {
> >  			xhci_debugfs_remove_endpoint(xhci, virt_dev, i);
> > -			xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
> > +			if (xhci_vendor_is_usb_offload_enabled(xhci, virt_dev, i))
> > +				xhci_vendor_free_transfer_ring(xhci, virt_dev->eps[i].new_ring, i);
> > +			else
> > +				xhci_ring_free(xhci, virt_dev->eps[i].new_ring);
> > +
> >  			virt_dev->eps[i].new_ring = NULL;
> >  		}
> >  	}
> > @@ -3290,6 +3302,13 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
> >  
> >  	wait_for_completion(stop_cmd->completion);
> >  
> > +	err = xhci_vendor_sync_dev_ctx(xhci, udev->slot_id);
> > +	if (err) {
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, err);
> > +		goto cleanup;
> > +	}
> > +
> >  	spin_lock_irqsave(&xhci->lock, flags);
> >  
> >  	/* config ep command clears toggle if add and drop ep flags are set */
> > @@ -3321,6 +3340,11 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
> >  
> >  	wait_for_completion(cfg_cmd->completion);
> >  
> > +	err = xhci_vendor_sync_dev_ctx(xhci, udev->slot_id);
> > +	if (err)
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, err);
> > +
> >  	xhci_free_command(xhci, cfg_cmd);
> >  cleanup:
> >  	xhci_free_command(xhci, stop_cmd);
> > @@ -3866,6 +3890,13 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
> >  	/* Wait for the Reset Device command to finish */
> >  	wait_for_completion(reset_device_cmd->completion);
> >  
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, slot_id);
> > +	if (ret) {
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, ret);
> > +		goto command_cleanup;
> > +	}
> > +
> >  	/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
> >  	 * unless we tried to reset a slot ID that wasn't enabled,
> >  	 * or the device wasn't in the addressed or configured state.
> > @@ -4111,6 +4142,14 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
> >  		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
> >  		goto disable_slot;
> >  	}
> > +
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, slot_id);
> > +	if (ret) {
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, ret);
> > +		goto disable_slot;
> > +	}
> > +
> >  	vdev = xhci->devs[slot_id];
> >  	slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
> >  	trace_xhci_alloc_dev(slot_ctx);
> > @@ -4241,6 +4280,13 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
> >  	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
> >  	wait_for_completion(command->completion);
> >  
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, udev->slot_id);
> > +	if (ret) {
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, ret);
> > +		goto out;
> > +	}
> > +
> >  	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
> >  	 * the SetAddress() "recovery interval" required by USB and aborting the
> >  	 * command on a timeout.
> > @@ -4393,6 +4439,14 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
> >  		return -ENOMEM;
> >  	}
> >  
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, udev->slot_id);
> > +	if (ret) {
> > +		spin_unlock_irqrestore(&xhci->lock, flags);
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, ret);
> > +		return ret;
> > +	}
> > +
> >  	xhci_slot_copy(xhci, command->in_ctx, virt_dev->out_ctx);
> >  	spin_unlock_irqrestore(&xhci->lock, flags);
> >  
> > @@ -4420,6 +4474,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
> >  	return ret;
> >  }
> >  
> > +struct xhci_vendor_ops *xhci_vendor_get_ops(struct xhci_hcd *xhci)
> > +{
> > +	return xhci->vendor_ops;
> > +}
> > +EXPORT_SYMBOL_GPL(xhci_vendor_get_ops);
> > +
> > +int xhci_vendor_sync_dev_ctx(struct xhci_hcd *xhci, unsigned int slot_id)
> > +{
> > +	struct xhci_vendor_ops *ops = xhci_vendor_get_ops(xhci);
> > +
> > +	if (ops && ops->sync_dev_ctx)
> > +		return ops->sync_dev_ctx(xhci, slot_id);
> > +	return 0;
> > +}
> > +
> >  #ifdef CONFIG_PM
> >  
> >  /* BESL to HIRD Encoding array for USB2 LPM */
> > @@ -5144,6 +5213,15 @@ static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
> >  		return -ENOMEM;
> >  	}
> >  
> > +	ret = xhci_vendor_sync_dev_ctx(xhci, hdev->slot_id);
> > +	if (ret) {
> > +		xhci_warn(xhci, "%s: Failed to sync device context failed, err=%d",
> > +			  __func__, ret);
> > +		xhci_free_command(xhci, config_cmd);
> > +		spin_unlock_irqrestore(&xhci->lock, flags);
> > +		return ret;
> > +	}
> > +
> >  	xhci_slot_copy(xhci, config_cmd->in_ctx, vdev->out_ctx);
> >  	ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
> >  	slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx);
> > diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
> > index 473a33ce299e..3a414a2f41f0 100644
> > --- a/drivers/usb/host/xhci.h
> > +++ b/drivers/usb/host/xhci.h
> > @@ -1929,6 +1929,9 @@ struct xhci_hcd {
> >  	struct list_head	regset_list;
> >  
> >  	void			*dbc;
> > +
> > +	struct xhci_vendor_ops *vendor_ops;
> > +
> >  	/* platform-specific data -- must come last */
> >  	unsigned long		priv[] __aligned(sizeof(s64));
> >  };
> > @@ -2207,6 +2210,49 @@ static inline struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci,
> >  					urb->stream_id);
> >  }
> >  
> > +/**
> > + * struct xhci_vendor_ops - function callbacks for vendor specific operations
> > + * @vendor_init: called for vendor init process
> > + * @vendor_cleanup: called for vendor cleanup process
> > + * @is_usb_offload_enabled: called to check if usb offload enabled
> > + * @alloc_dcbaa: called when allocating vendor specific dcbaa
> > + * @free_dcbaa: called to free vendor specific dcbaa
> > + * @alloc_transfer_ring: called when remote transfer ring allocation is required
> > + * @free_transfer_ring: called to free vendor specific transfer ring
> > + * @sync_dev_ctx: called when synchronization for device context is required
> > + * @alloc_container_ctx: called when allocating vendor specific container context
> > + * @free_container_ctx: called to free vendor specific container context
> > + */
> > +struct xhci_vendor_ops {
> > +	int (*vendor_init)(struct xhci_hcd *xhci, struct device *dev);
> > +	void (*vendor_cleanup)(struct xhci_hcd *xhci);
> > +	bool (*is_usb_offload_enabled)(struct xhci_hcd *xhci,
> > +				       struct xhci_virt_device *vdev,
> > +				       unsigned int ep_index);
> > +
> > +	struct xhci_device_context_array *(*alloc_dcbaa)(struct xhci_hcd *xhci,
> > +							 gfp_t flags);
> > +	void (*free_dcbaa)(struct xhci_hcd *xhci);
> > +
> > +	struct xhci_ring *(*alloc_transfer_ring)(struct xhci_hcd *xhci,
> > +			u32 endpoint_type, enum xhci_ring_type ring_type,
> > +			unsigned int max_packet, gfp_t mem_flags);
> > +	void (*free_transfer_ring)(struct xhci_hcd *xhci,
> > +			struct xhci_ring *ring, unsigned int ep_index);
> > +	int (*sync_dev_ctx)(struct xhci_hcd *xhci, unsigned int slot_id);
> > +	void (*alloc_container_ctx)(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx,
> > +				    int type, gfp_t flags);
> > +	void (*free_container_ctx)(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
> > +};
> > +
> > +struct xhci_vendor_ops *xhci_vendor_get_ops(struct xhci_hcd *xhci);
> > +
> > +int xhci_vendor_sync_dev_ctx(struct xhci_hcd *xhci, unsigned int slot_id);
> > +void xhci_vendor_free_transfer_ring(struct xhci_hcd *xhci,
> > +		struct xhci_ring *ring, unsigned int ep_index);
> > +bool xhci_vendor_is_usb_offload_enabled(struct xhci_hcd *xhci,
> > +		struct xhci_virt_device *virt_dev, unsigned int ep_index);
> 
> Why the three options here?  Why does ep_index matter?
> 
They are implemented in xhci-mem.c but they're used by other files.
ep_index could be deleted. Thanks.

> And no documentiaon for these global function?
> 

I thought there's no need to add documentation. They are just functions to call
vendor ops and there's documentation of vendor ops above. I could add it if needed.

Best Regards,
Jung Daehwan

> thanks,
> 
> greg k-h
> 

[-- Attachment #2: Type: text/plain, Size: 0 bytes --]



  reply	other threads:[~2022-04-27  9:09 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20220426092019epcas2p2ef5dfde273edaaadc2ff74414f1b2c7a@epcas2p2.samsung.com>
2022-04-26  9:18 ` [PATCH v4 0/5] add xhci-exynos driver Daehwan Jung
     [not found]   ` <CGME20220426092021epcas2p4071f2b7621558a015579131990486a3c@epcas2p4.samsung.com>
2022-04-26  9:18     ` [PATCH v4 1/5] usb: host: export symbols for xhci-exynos to use xhci hooks Daehwan Jung
2022-04-26  9:54       ` Greg Kroah-Hartman
2022-04-26 10:27         ` Jung Daehwan
2022-04-26 10:31           ` Greg Kroah-Hartman
2022-04-26 18:40             ` Greg Kroah-Hartman
2022-04-28  3:30               ` Jung Daehwan
2022-04-26 16:02       ` kernel test robot
     [not found]   ` <CGME20220426092021epcas2p1a8d41039d9b3226f4e00f7d4bded833a@epcas2p1.samsung.com>
2022-04-26  9:18     ` [PATCH v4 2/5] usb: host: add xhci hooks for xhci-exynos Daehwan Jung
2022-04-26 10:19       ` Greg Kroah-Hartman
2022-04-27  9:06         ` Jung Daehwan [this message]
2022-04-27  9:19           ` Greg Kroah-Hartman
2022-04-28  3:23             ` Jung Daehwan
2022-04-28  5:30               ` Greg Kroah-Hartman
     [not found]   ` <CGME20220426092022epcas2p2da47c0c20feba6c96037e125289475f9@epcas2p2.samsung.com>
2022-04-26  9:18     ` [PATCH v4 3/5] usb: host: xhci-plat: support override of hc driver Daehwan Jung
2022-04-26 10:20       ` Greg Kroah-Hartman
2022-04-27  9:07         ` Jung Daehwan
     [not found]   ` <CGME20220426092022epcas2p2c016c83b21e41c7bcd4bdfbb95e464c0@epcas2p2.samsung.com>
2022-04-26  9:18     ` [PATCH v4 4/5] usb: host: add some to xhci overrides for xhci-exynos Daehwan Jung
2022-04-26 10:23       ` Greg Kroah-Hartman
2022-04-27  9:19         ` Jung Daehwan
2022-04-27  9:37           ` Greg Kroah-Hartman
     [not found]   ` <CGME20220426092023epcas2p32946c087135ca4b7e63b03915060c55d@epcas2p3.samsung.com>
2022-04-26  9:18     ` [PATCH v4 5/5] usb: host: add xhci-exynos driver Daehwan Jung
2022-04-26 10:20       ` Greg Kroah-Hartman
2022-04-28  3:26         ` Jung Daehwan
2022-04-26 10:21       ` Greg Kroah-Hartman
2022-04-27  9:24         ` Jung Daehwan
2022-04-27  9:37           ` Greg Kroah-Hartman
2022-04-26 12:59       ` Krzysztof Kozlowski
2022-04-28  1:29         ` Jung Daehwan
2022-04-28  5:19           ` Krzysztof Kozlowski
2022-04-28  6:36             ` Jung Daehwan
2022-04-28  6:45               ` Greg Kroah-Hartman
2022-04-28  7:45                 ` Jung Daehwan
2022-04-28  7:31               ` Krzysztof Kozlowski
2022-04-28  7:53                 ` Jung Daehwan
2022-04-28  8:26                   ` Krzysztof Kozlowski
2022-04-26 17:55       ` kernel test robot
2022-04-27 16:25       ` Mathias Nyman
2022-04-28  3:03         ` Jung Daehwan
2022-04-28 12:28           ` Mathias Nyman
2022-05-03  8:41             ` Jung Daehwan
2022-04-28  5:15         ` Jung Daehwan
2022-04-26 10:19   ` [PATCH v4 0/5] " Greg Kroah-Hartman
2022-04-26 12:46   ` Krzysztof Kozlowski
2022-04-27  9:49     ` Jung Daehwan
2022-04-27 18:24       ` Krzysztof Kozlowski
2022-04-28  3:19         ` Jung Daehwan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220427090617.GA145620@ubuntu \
    --to=dh10.jung@samsung.com \
    --cc=elavila@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=howardyen@google.com \
    --cc=jackp@codeaurora.org \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=pumahsu@google.com \
    --cc=sc.suh@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).