Re: [PATCH v4 5/5] usb: host: add xhci-exynos driver

[Krzysztof Kozlowski <krzk@kernel.org>]

On 26/04/2022 11:18, Daehwan Jung wrote:
> This driver is for Samsung Exynos xhci host conroller. It uses xhci-plat
> driver mainly and extends some functions by xhci hooks and overrides.
> 
> It supports USB Audio offload with Co-processor. It only cares DCBAA,
> Device Context, Transfer Ring, Event Ring, and ERST. They are allocated
> on specific address with xhci hooks. Co-processor could use them directly
> without xhci driver after then.

This does not look like developed in current Linux kernel, but something
out-of-tree, with some other unknown modifications. This is not how the
code should be developed. Please rebase on linux-next and drop any
unrelated modifications (these which are not sent with this patchset).

(...)

> +
> +static int xhci_exynos_suspend(struct device *dev)
> +{
> +	struct usb_hcd	*hcd = dev_get_drvdata(dev);
> +	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
> +
> +	/* TODO: AP sleep scenario*/

Shall the patchset be called RFC?

> +
> +	return xhci_suspend(xhci, device_may_wakeup(dev));
> +}
> +
> +static int xhci_exynos_resume(struct device *dev)
> +{
> +	struct usb_hcd	*hcd = dev_get_drvdata(dev);
> +	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
> +	int ret;
> +
> +	/* TODO: AP resume scenario*/
> +
> +	ret = xhci_resume(xhci, 0);
> +	if (ret)
> +		return ret;
> +
> +	pm_runtime_disable(dev);
> +	pm_runtime_set_active(dev);
> +	pm_runtime_enable(dev);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops xhci_exynos_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(xhci_exynos_suspend, xhci_exynos_resume)
> +};
> +
> +MODULE_DESCRIPTION("xHCI Exynos Host Controller Driver");
> +MODULE_LICENSE("GPL");

You don't have list of compatibles (and missing bindings), driver
definition, driver registration. Entire solution is not used - nothing
calls xhci_exynos_vendor_init(), because nothign uses "ops".

This does not work and it makes it impossible to test it. Please provide
proper XHCI Exynos driver, assuming you need it and it is not part of
regular Exynos XHCI drivers (DWC3 and so on).

Best regards,
Krzysztof