linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Morten Linderud <morten@linderud.pw>
To: unlisted-recipients:; (no To-header on input)
Cc: Morten Linderud <morten@linderud.pw>,
	Peter Huewe <peterhuewe@gmx.de>,
	Jarkko Sakkinen <jarkko@kernel.org>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
Date: Wed,  8 Jun 2022 14:31:08 +0200	[thread overview]
Message-ID: <20220608123109.678343-1-morten@linderud.pw> (raw)

tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and the function returns -EIO
which would abort discovery of the eventlog.

This change ensure we always return -ENODEV in tpm_read_log_acpi() and
fallback to the EFI configuration table.

The following hardware was used to test this issue:
    Framework Laptop (Pre-production)
    BIOS: INSYDE Corp, Revision: 3.2
    TPM Device: NTC, Firmware Revision: 7.2

Dump of the faulty ACPI TPM2 table:
    [000h 0000   4]                    Signature : "TPM2"    [Trusted Platform Module hardware interface Table]
    [004h 0004   4]                 Table Length : 0000004C
    [008h 0008   1]                     Revision : 04
    [009h 0009   1]                     Checksum : 2B
    [00Ah 0010   6]                       Oem ID : "INSYDE"
    [010h 0016   8]                 Oem Table ID : "TGL-ULT"
    [018h 0024   4]                 Oem Revision : 00000002
    [01Ch 0028   4]              Asl Compiler ID : "ACPI"
    [020h 0032   4]        Asl Compiler Revision : 00040000

    [024h 0036   2]               Platform Class : 0000
    [026h 0038   2]                     Reserved : 0000
    [028h 0040   8]              Control Address : 0000000000000000
    [030h 0048   4]                 Start Method : 06 [Memory Mapped I/O]

    [034h 0052  12]            Method Parameters : 00 00 00 00 00 00 00 00 00 00 00 00
    [040h 0064   4]           Minimum Log Length : 00010000
    [044h 0068   8]                  Log Address : 000000004053D000

Signed-off-by: Morten Linderud <morten@linderud.pw>

---

v2: Tweak commit message and opt to return -ENODEV instead of loosening up the
    if condition in tpm_read_log()

---
 drivers/char/tpm/eventlog/acpi.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/eventlog/acpi.c b/drivers/char/tpm/eventlog/acpi.c
index 1b18ce5ebab1..2b15d6eebd69 100644
--- a/drivers/char/tpm/eventlog/acpi.c
+++ b/drivers/char/tpm/eventlog/acpi.c
@@ -136,8 +136,12 @@ int tpm_read_log_acpi(struct tpm_chip *chip)
 
 	ret = -EIO;
 	virt = acpi_os_map_iomem(start, len);
-	if (!virt)
+	if (!virt) {
+		dev_warn(&chip->dev, "%s: Failed to map ACPI memory\n", __func__);
+		/* try EFI log next */
+		ret = -ENODEV;
 		goto err;
+	}
 
 	memcpy_fromio(log->bios_event_log, virt, len);
 
-- 
2.36.1

             reply	other threads:[~2022-06-08 12:57 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-08 12:31 Morten Linderud [this message]
2022-06-09  4:46 ` [PATCH v2] tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address Jarkko Sakkinen
2022-06-09  8:11   ` Morten Linderud
2022-06-09 11:47     ` Jarkko Sakkinen
2022-06-10 13:29       ` Morten Linderud
2022-06-15 18:44         ` Jarkko Sakkinen
2022-10-01 21:52           ` Erkki Eilonen
2022-10-02 11:10             ` Morten Linderud
2022-10-04 22:23             ` Jarkko Sakkinen
2023-02-14 21:52               ` Erkki Eilonen
2023-02-17 22:27                 ` Jarkko Sakkinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220608123109.678343-1-morten@linderud.pw \
    --to=morten@linderud.pw \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).