[PATCH v2 00/26] Rework the trip points creation

[PATCH v2 00/26] Rework the trip points creation

[Daniel Lezcano]

This work is the pre-requisite of handling correctly when the trip
point are crossed. For that we need to rework how the trip points are
declared and assigned to a thermal zone.

Even if it appears to be a common sense to have the trip points being
ordered, this no guarantee neither documentation telling that is the
case.

One solution could have been to create an ordered array of trips built
when registering the thermal zone by calling the different get_trip*
ops. However those ops receive a thermal zone pointer which is not
known as it is in the process of creating it.

This cyclic dependency shows we have to rework how we manage the trip
points.

Actually, all the trip points definition can be common to the backend
sensor drivers and we can factor out the thermal trip structure in all
of them.

Then, as we register the thermal trips array, they will be available
in the thermal zone structure and a core function can return the trip
given its id.

The get_trip_* ops won't be needed anymore and could be removed. The
resulting code will be another step forward to a self encapsulated
generic thermal framework.

Most of the drivers can be converted more or less easily. This series
does a first round with most of the drivers. Some remain and will be
converted but with a smaller set of changes as the conversion is a bit
more complex.

Changelog:
 v2:
   - Added missing EXPORT_SYMBOL_GPL() for thermal_zone_get_trip()
   - Removed tab whitespace in the acerhdf driver
   - Collected tags

Cc: Raju Rangoju <rajur@chelsio.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Kaestle <peter@piie.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amitk@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Broadcom Kernel Team <bcm-kernel-feedback-list@broadcom.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Support Opensource <support.opensource@diasemi.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Antoine Tenart <atenart@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-omap@vger.kernel.org

Daniel Lezcano (26):
  thermal/core: encapsulate ops->get_trip_* ops into a function
  thermal/sysfs: Do not make get_trip_hyst optional
  thermal/core/governors: Use thermal_zone_get_trip() instead of ops
    functions
  thermal/drivers/st: Use generic trip points
  thermal/drivers/tegra: Use generic thermal_zone_get_trip() function
  thermal/drivers/imx: Use generic thermal_zone_get_trip() function
  thermal/drivers/exynos: Use generic thermal_zone_get_trip() function
  thermal/drivers/rcar: Use generic thermal_zone_get_trip() function
  thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function
  thermal/drivers/hisi: Use generic thermal_zone_get_trip() function
  thermal/drivers/qcom: Use generic thermal_zone_get_trip() function
  thermal/drivers/OF: Use generic thermal_zone_get_trip() function
  thermal/drivers/armada: Use generic thermal_zone_get_trip() function
  thermal/core/OF: Remove unused functions
  thermal/drivers/rcar_gen3: Use the generic function to get the number
    of trips
  thermal/drivers/exynos: of_thermal_get_ntrips()
  thermal/core/of: Remove of_thermal_get_ntrips()
  thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by
    thermal_zone_get_trip()
  thermal/core/of: Remove of_thermal_is_trip_valid()
  thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function
  thermal/drivers/da9062: Use generic thermal_zone_get_trip() function
  thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() /
    ti_thermal_trip_is_valid()
  thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function
  thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function
  thermal/intel/int340x: Replace parameter to simplify
  thermal/drivers/intel: Use generic thermal_zone_get_trip() function

 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |   2 -
 .../ethernet/chelsio/cxgb4/cxgb4_thermal.c    |  41 ++----
 drivers/platform/x86/acerhdf.c                |  73 ++++-------
 drivers/thermal/armada_thermal.c              |  39 +++---
 drivers/thermal/broadcom/bcm2835_thermal.c    |   8 +-
 drivers/thermal/da9062-thermal.c              |  52 ++------
 drivers/thermal/gov_bang_bang.c               |  23 ++--
 drivers/thermal/gov_fair_share.c              |  18 +--
 drivers/thermal/gov_power_allocator.c         |  51 ++++----
 drivers/thermal/gov_step_wise.c               |  22 ++--
 drivers/thermal/hisi_thermal.c                |  11 +-
 drivers/thermal/imx_thermal.c                 |  72 ++++-------
 .../int340x_thermal/int340x_thermal_zone.c    |  31 ++---
 .../int340x_thermal/int340x_thermal_zone.h    |   4 +-
 .../processor_thermal_device.c                |  10 +-
 drivers/thermal/intel/x86_pkg_temp_thermal.c  | 120 ++++++++++--------
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c   |  39 +++---
 drivers/thermal/rcar_gen3_thermal.c           |   2 +-
 drivers/thermal/rcar_thermal.c                |  49 +------
 drivers/thermal/samsung/exynos_tmu.c          |  60 ++++-----
 drivers/thermal/st/st_thermal.c               |  47 +------
 drivers/thermal/tegra/soctherm.c              |  33 ++---
 drivers/thermal/tegra/tegra30-tsensor.c       |  17 ++-
 drivers/thermal/thermal_core.c                |  69 ++++++----
 drivers/thermal/thermal_core.h                |  30 ++---
 drivers/thermal/thermal_helpers.c             |  28 ++--
 drivers/thermal/thermal_netlink.c             |  21 ++-
 drivers/thermal/thermal_of.c                  |  88 -------------
 drivers/thermal/thermal_sysfs.c               |  91 +++++--------
 drivers/thermal/ti-soc-thermal/ti-thermal.h   |  15 ---
 drivers/thermal/uniphier_thermal.c            |  26 ++--
 31 files changed, 435 insertions(+), 757 deletions(-)

-- 
2.34.1

[PATCH v2 01/26] thermal/core: encapsulate ops->get_trip_* ops into a function

[Daniel Lezcano]

The thermal_zone_device_ops structure defines a set of ops family,
get_trip_temp(), get_trip_hyst(), get_trip_type(). Each of them is
returning a property of a trip point.

The result is the code is calling the ops everywhere to get a trip
point which is supposed to be defined in the backend driver. It is a
non-sense as a thermal trip can be generic and used by the backend
driver to declare its trip points.

Part of the thermal framework has been changed and all the OF thermal
drivers are using the same definition for the trip point and use a
thermal zone registration variant to pass those trip points which are
part of the thermal zone device structure.

Consequently, we can use a generic function to get the trip points
when they are stored in the thermal zone device structure.

This approach can be generalized to all the drivers and we can get rid
of the ops->get_trip_*. That will result to a much more simpler code
and make possible to rework how the thermal trip are handled in the
thermal core framework as discussed previously.

This change adds a function thermal_zone_get_trip() where we get the
thermal trip point structure which contains all the properties (type,
temp, hyst) instead of doing multiple calls to ops->get_trip_*.

That opens the door for trip point extension with more attributes. For
instance, replacing the trip points disabled bitmask with a 'disabled'
field in the structure.

Here we replace all the calls to ops->get_trip_* in the thermal core
code with a call to the thermal_zone_get_trip() function.

While at it, add the thermal_zone_get_num_trips() to encapsulate the
code more and reduce the grip with the thermal framework internals.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.c    | 69 ++++++++++++++++++++-----------
 drivers/thermal/thermal_core.h    |  8 ++++
 drivers/thermal/thermal_helpers.c | 28 ++++++-------
 drivers/thermal/thermal_netlink.c | 21 ++++------
 drivers/thermal/thermal_sysfs.c   | 66 ++++++++++++-----------------
 5 files changed, 103 insertions(+), 89 deletions(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 10c979dce512..5891b86758c1 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -354,35 +354,31 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
 		tz->ops->critical(tz);
 }
 
-static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
+static void handle_thermal_trip(struct thermal_zone_device *tz, int trip_id)
 {
-	enum thermal_trip_type type;
-	int trip_temp, hyst = 0;
+	struct thermal_trip trip;
 
 	/* Ignore disabled trip points */
-	if (test_bit(trip, &tz->trips_disabled))
+	if (test_bit(trip_id, &tz->trips_disabled))
 		return;
 
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
-	tz->ops->get_trip_type(tz, trip, &type);
-	if (tz->ops->get_trip_hyst)
-		tz->ops->get_trip_hyst(tz, trip, &hyst);
+	thermal_zone_get_trip(tz, trip_id, &trip);
 
 	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
-		if (tz->last_temperature < trip_temp &&
-		    tz->temperature >= trip_temp)
-			thermal_notify_tz_trip_up(tz->id, trip,
+		if (tz->last_temperature < trip.temperature &&
+		    tz->temperature >= trip.temperature)
+			thermal_notify_tz_trip_up(tz->id, trip_id,
 						  tz->temperature);
-		if (tz->last_temperature >= trip_temp &&
-		    tz->temperature < (trip_temp - hyst))
-			thermal_notify_tz_trip_down(tz->id, trip,
+		if (tz->last_temperature >= trip.temperature &&
+		    tz->temperature < (trip.temperature - trip.hysteresis))
+			thermal_notify_tz_trip_down(tz->id, trip_id,
 						    tz->temperature);
 	}
 
-	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
-		handle_critical_trips(tz, trip, trip_temp, type);
+	if (trip.type == THERMAL_TRIP_CRITICAL || trip.type == THERMAL_TRIP_HOT)
+		handle_critical_trips(tz, trip_id, trip.temperature, trip.type);
 	else
-		handle_non_critical_trips(tz, trip);
+		handle_non_critical_trips(tz, trip_id);
 	/*
 	 * Alright, we handled this trip successfully.
 	 * So, start monitoring again.
@@ -1162,6 +1158,34 @@ static void thermal_set_delay_jiffies(unsigned long *delay_jiffies, int delay_ms
 		*delay_jiffies = round_jiffies(*delay_jiffies);
 }
 
+int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
+			  struct thermal_trip *trip)
+{
+	int ret;
+
+	if (!tz || trip_id < 0 || trip_id >= tz->num_trips || !trip)
+		return -EINVAL;
+
+	if (tz->trips) {
+		*trip = tz->trips[trip_id];
+		return 0;
+	}
+
+	if (tz->ops->get_trip_hyst) {
+		ret = tz->ops->get_trip_hyst(tz, trip_id, &trip->hysteresis);
+		if (ret)
+			return ret;
+	} else trip->hysteresis = 0;
+
+	ret = tz->ops->get_trip_temp(tz, trip_id, &trip->temperature);
+	if (ret)
+		return ret;
+
+	return tz->ops->get_trip_type(tz, trip_id, &trip->type);
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_trip);
+
+
 /**
  * thermal_zone_device_register_with_trips() - register a new thermal zone device
  * @type:	the thermal zone device type
@@ -1194,8 +1218,6 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 					int polling_delay)
 {
 	struct thermal_zone_device *tz;
-	enum thermal_trip_type trip_type;
-	int trip_temp;
 	int id;
 	int result;
 	int count;
@@ -1222,7 +1244,7 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (num_trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
+	if (num_trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp) && !trips)
 		return ERR_PTR(-EINVAL);
 
 	tz = kzalloc(sizeof(*tz), GFP_KERNEL);
@@ -1272,9 +1294,10 @@ thermal_zone_device_register_with_trips(const char *type, struct thermal_trip *t
 		goto release_device;
 
 	for (count = 0; count < num_trips; count++) {
-		if (tz->ops->get_trip_type(tz, count, &trip_type) ||
-		    tz->ops->get_trip_temp(tz, count, &trip_temp) ||
-		    !trip_temp)
+		struct thermal_trip trip;
+
+		result = thermal_zone_get_trip(tz, count, &trip);
+		if (result)
 			set_bit(count, &tz->trips_disabled);
 	}
 
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 2241d2dce017..194e98a5b102 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -110,6 +110,14 @@ void thermal_unregister_governor(struct thermal_governor *);
 int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
 int thermal_build_list_of_policies(char *buf);
 
+int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id,
+			  struct thermal_trip *trip);
+
+static inline int thermal_zone_get_num_trips(struct thermal_zone_device *tz)
+{
+	return tz->num_trips;
+}
+
 /* Helpers */
 void thermal_zone_set_trips(struct thermal_zone_device *tz);
 
diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c
index 690890f054a3..626a70d70567 100644
--- a/drivers/thermal/thermal_helpers.c
+++ b/drivers/thermal/thermal_helpers.c
@@ -79,7 +79,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 	int ret = -EINVAL;
 	int count;
 	int crit_temp = INT_MAX;
-	enum thermal_trip_type type;
+	struct thermal_trip trip;
 
 	if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
 		goto exit;
@@ -90,10 +90,9 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	if (IS_ENABLED(CONFIG_THERMAL_EMULATION) && tz->emul_temperature) {
 		for (count = 0; count < tz->num_trips; count++) {
-			ret = tz->ops->get_trip_type(tz, count, &type);
-			if (!ret && type == THERMAL_TRIP_CRITICAL) {
-				ret = tz->ops->get_trip_temp(tz, count,
-						&crit_temp);
+			ret = thermal_zone_get_trip(tz, count, &trip);
+			if (!ret && trip.type == THERMAL_TRIP_CRITICAL) {
+				crit_temp = trip.temperature;
 				break;
 			}
 		}
@@ -127,29 +126,30 @@ EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
  */
 void thermal_zone_set_trips(struct thermal_zone_device *tz)
 {
-	int low = -INT_MAX;
-	int high = INT_MAX;
-	int trip_temp, hysteresis;
+	struct thermal_trip trip;
+	int low = -INT_MAX, high = INT_MAX;
 	int i, ret;
 
 	mutex_lock(&tz->lock);
 
-	if (!tz->ops->set_trips || !tz->ops->get_trip_hyst)
+	if (!tz->ops->set_trips)
 		goto exit;
 
 	for (i = 0; i < tz->num_trips; i++) {
 		int trip_low;
 
-		tz->ops->get_trip_temp(tz, i, &trip_temp);
-		tz->ops->get_trip_hyst(tz, i, &hysteresis);
+		ret = thermal_zone_get_trip(tz, i , &trip);
+		if (ret)
+			goto exit;
 
-		trip_low = trip_temp - hysteresis;
+		trip_low = trip.temperature - trip.hysteresis;
 
 		if (trip_low < tz->temperature && trip_low > low)
 			low = trip_low;
 
-		if (trip_temp > tz->temperature && trip_temp < high)
-			high = trip_temp;
+		if (trip.temperature > tz->temperature &&
+		    trip.temperature < high)
+			high = trip.temperature;
 	}
 
 	/* No need to change trip points */
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 050d243a5fa1..ce56d441c88c 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c
@@ -452,7 +452,8 @@ static int thermal_genl_cmd_tz_get_trip(struct param *p)
 	struct sk_buff *msg = p->msg;
 	struct thermal_zone_device *tz;
 	struct nlattr *start_trip;
-	int i, id;
+	struct thermal_trip trip;
+	int ret, i, id;
 
 	if (!p->attrs[THERMAL_GENL_ATTR_TZ_ID])
 		return -EINVAL;
@@ -471,18 +472,14 @@ static int thermal_genl_cmd_tz_get_trip(struct param *p)
 
 	for (i = 0; i < tz->num_trips; i++) {
 
-		enum thermal_trip_type type;
-		int temp, hyst = 0;
-
-		tz->ops->get_trip_type(tz, i, &type);
-		tz->ops->get_trip_temp(tz, i, &temp);
-		if (tz->ops->get_trip_hyst)
-			tz->ops->get_trip_hyst(tz, i, &hyst);
-
+		ret = thermal_zone_get_trip(tz, i, &trip);
+		if (ret)
+			goto out_cancel_nest;
+		
 		if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, i) ||
-		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, type) ||
-		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, temp) ||
-		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, hyst))
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, trip.type) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TEMP, trip.temperature) ||
+		    nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_HYST, trip.hysteresis))
 			goto out_cancel_nest;
 	}
 
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 3c513561d346..2b53927f3263 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -79,20 +79,17 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	enum thermal_trip_type type;
-	int trip, result;
+	struct thermal_trip trip;
+	int trip_id, result;
 
-	if (!tz->ops->get_trip_type)
-		return -EPERM;
-
-	if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1)
+	if (sscanf(attr->attr.name, "trip_point_%d_type", &trip_id) != 1)
 		return -EINVAL;
 
-	result = tz->ops->get_trip_type(tz, trip, &type);
+	result = thermal_zone_get_trip(tz, trip_id, &trip);
 	if (result)
 		return result;
 
-	switch (type) {
+	switch (trip.type) {
 	case THERMAL_TRIP_CRITICAL:
 		return sprintf(buf, "critical\n");
 	case THERMAL_TRIP_HOT:
@@ -111,37 +108,31 @@ trip_point_temp_store(struct device *dev, struct device_attribute *attr,
 		      const char *buf, size_t count)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	int trip, ret;
-	int temperature, hyst = 0;
-	enum thermal_trip_type type;
+	struct thermal_trip trip;
+	int trip_id, ret;
 
 	if (!tz->ops->set_trip_temp && !tz->trips)
 		return -EPERM;
 
-	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
+	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1)
 		return -EINVAL;
 
-	if (kstrtoint(buf, 10, &temperature))
+	if (kstrtoint(buf, 10, &trip.temperature))
 		return -EINVAL;
 
-	ret = tz->ops->set_trip_temp(tz, trip, temperature);
+	ret = tz->ops->set_trip_temp(tz, trip_id, trip.temperature);
 	if (ret)
 		return ret;
 
 	if (tz->trips)
-		tz->trips[trip].temperature = temperature;
-
-	if (tz->ops->get_trip_hyst) {
-		ret = tz->ops->get_trip_hyst(tz, trip, &hyst);
-		if (ret)
-			return ret;
-	}
+		tz->trips[trip_id].temperature = trip.temperature;
 
-	ret = tz->ops->get_trip_type(tz, trip, &type);
+	ret = thermal_zone_get_trip(tz, trip_id, &trip);
 	if (ret)
 		return ret;
 
-	thermal_notify_tz_trip_change(tz->id, trip, type, temperature, hyst);
+	thermal_notify_tz_trip_change(tz->id, trip_id, trip.type,
+				      trip.temperature, trip.hysteresis);
 
 	thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
 
@@ -153,21 +144,17 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	int trip, ret;
-	int temperature;
-
-	if (!tz->ops->get_trip_temp)
-		return -EPERM;
+	struct thermal_trip trip;
+	int trip_id, ret;
 
-	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
+	if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip_id) != 1)
 		return -EINVAL;
 
-	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
-
+	ret = thermal_zone_get_trip(tz, trip_id, &trip);
 	if (ret)
 		return ret;
 
-	return sprintf(buf, "%d\n", temperature);
+	return sprintf(buf, "%d\n", trip.temperature);
 }
 
 static ssize_t
@@ -205,18 +192,17 @@ trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	int trip, ret;
-	int temperature;
+	struct thermal_trip trip;
+	int trip_id, ret;
 
-	if (!tz->ops->get_trip_hyst)
-		return -EPERM;
-
-	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
+	if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip_id) != 1)
 		return -EINVAL;
 
-	ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
+	ret = thermal_zone_get_trip(tz, trip_id, &trip);
+	if (ret)
+		return ret;
 
-	return ret ? ret : sprintf(buf, "%d\n", temperature);
+	return ret ? ret : sprintf(buf, "%d\n", trip.hysteresis);
 }
 
 static ssize_t
-- 
2.34.1

[PATCH v2 02/26] thermal/sysfs: Do not make get_trip_hyst optional

[Daniel Lezcano]

The get_trip_hyst() ops is optional. It results all around the thermal
framework code a check against the ops pointer and different action
adding more complexity and making the code less readable and
understandable.

A zero hysteresis value is perfectly valid, so instead of adding more
circumvolutions in the code, create unconditionnaly the hysteresis and
use the thermal_zone_get_trip() function which returns a zero
hysteresis if the get_trip_hyst() is not defined.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_sysfs.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 2b53927f3263..bc3337826ae2 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -420,23 +420,20 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 		return -ENOMEM;
 	}
 
-	if (tz->ops->get_trip_hyst) {
-		tz->trip_hyst_attrs = kcalloc(tz->num_trips,
-					      sizeof(*tz->trip_hyst_attrs),
-					      GFP_KERNEL);
-		if (!tz->trip_hyst_attrs) {
-			kfree(tz->trip_type_attrs);
-			kfree(tz->trip_temp_attrs);
-			return -ENOMEM;
-		}
+	tz->trip_hyst_attrs = kcalloc(tz->num_trips,
+				      sizeof(*tz->trip_hyst_attrs),
+				      GFP_KERNEL);
+	if (!tz->trip_hyst_attrs) {
+		kfree(tz->trip_type_attrs);
+		kfree(tz->trip_temp_attrs);
+		return -ENOMEM;
 	}
 
 	attrs = kcalloc(tz->num_trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
 	if (!attrs) {
 		kfree(tz->trip_type_attrs);
 		kfree(tz->trip_temp_attrs);
-		if (tz->ops->get_trip_hyst)
-			kfree(tz->trip_hyst_attrs);
+		kfree(tz->trip_hyst_attrs);
 		return -ENOMEM;
 	}
 
@@ -469,9 +466,6 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
 		}
 		attrs[indx + tz->num_trips] = &tz->trip_temp_attrs[indx].attr.attr;
 
-		/* create Optional trip hyst attribute */
-		if (!tz->ops->get_trip_hyst)
-			continue;
 		snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
 			 "trip_point_%d_hyst", indx);
 
@@ -508,8 +502,7 @@ static void destroy_trip_attrs(struct thermal_zone_device *tz)
 
 	kfree(tz->trip_type_attrs);
 	kfree(tz->trip_temp_attrs);
-	if (tz->ops->get_trip_hyst)
-		kfree(tz->trip_hyst_attrs);
+	kfree(tz->trip_hyst_attrs);
 	kfree(tz->trips_attribute_group.attrs);
 }
 
-- 
2.34.1

[PATCH v2 03/26] thermal/core/governors: Use thermal_zone_get_trip() instead of ops functions

[Daniel Lezcano]

The governors are using the ops->get_trip_* functions, Replace these
calls with thermal_zone_get_trip().

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/gov_bang_bang.c       | 23 +++++-------
 drivers/thermal/gov_fair_share.c      | 18 ++++------
 drivers/thermal/gov_power_allocator.c | 51 ++++++++++++---------------
 drivers/thermal/gov_step_wise.c       | 22 ++++++------
 4 files changed, 47 insertions(+), 67 deletions(-)

diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c
index 991a1c54296d..de59ea9e2f7b 100644
--- a/drivers/thermal/gov_bang_bang.c
+++ b/drivers/thermal/gov_bang_bang.c
@@ -13,28 +13,21 @@
 
 #include "thermal_core.h"
 
-static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id)
 {
-	int trip_temp, trip_hyst;
+	struct thermal_trip trip;
 	struct thermal_instance *instance;
 
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
-
-	if (!tz->ops->get_trip_hyst) {
-		pr_warn_once("Undefined get_trip_hyst for thermal zone %s - "
-				"running with default hysteresis zero\n", tz->type);
-		trip_hyst = 0;
-	} else
-		tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
+	thermal_zone_get_trip(tz, trip_id, &trip);
 
 	dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n",
-				trip, trip_temp, tz->temperature,
-				trip_hyst);
+				trip_id, trip.temperature, tz->temperature,
+				trip.hysteresis);
 
 	mutex_lock(&tz->lock);
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
-		if (instance->trip != trip)
+		if (instance->trip != trip_id)
 			continue;
 
 		/* in case fan is in initial state, switch the fan off */
@@ -52,10 +45,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 		 * enable fan when temperature exceeds trip_temp and disable
 		 * the fan in case it falls below trip_temp minus hysteresis
 		 */
-		if (instance->target == 0 && tz->temperature >= trip_temp)
+		if (instance->target == 0 && tz->temperature >= trip.temperature)
 			instance->target = 1;
 		else if (instance->target == 1 &&
-				tz->temperature <= trip_temp - trip_hyst)
+			 tz->temperature <= trip.temperature - trip.hysteresis)
 			instance->target = 0;
 
 		dev_dbg(&instance->cdev->device, "target=%d\n",
diff --git a/drivers/thermal/gov_fair_share.c b/drivers/thermal/gov_fair_share.c
index 6a2abcfc648f..877d52605871 100644
--- a/drivers/thermal/gov_fair_share.c
+++ b/drivers/thermal/gov_fair_share.c
@@ -21,16 +21,12 @@
  */
 static int get_trip_level(struct thermal_zone_device *tz)
 {
-	int count = 0;
-	int trip_temp;
-	enum thermal_trip_type trip_type;
-
-	if (tz->num_trips == 0 || !tz->ops->get_trip_temp)
-		return 0;
+	struct thermal_trip trip;
+	int count;
 
 	for (count = 0; count < tz->num_trips; count++) {
-		tz->ops->get_trip_temp(tz, count, &trip_temp);
-		if (tz->temperature < trip_temp)
+		thermal_zone_get_trip(tz, count, &trip);
+		if (tz->temperature < trip.temperature)
 			break;
 	}
 
@@ -38,10 +34,8 @@ static int get_trip_level(struct thermal_zone_device *tz)
 	 * count > 0 only if temperature is greater than first trip
 	 * point, in which case, trip_point = count - 1
 	 */
-	if (count > 0) {
-		tz->ops->get_trip_type(tz, count - 1, &trip_type);
-		trace_thermal_zone_trip(tz, count - 1, trip_type);
-	}
+	if (count > 0)
+		trace_thermal_zone_trip(tz, count - 1, trip.type);
 
 	return count;
 }
diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 1d5052470967..54ba05d532db 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -125,16 +125,15 @@ static void estimate_pid_constants(struct thermal_zone_device *tz,
 				   u32 sustainable_power, int trip_switch_on,
 				   int control_temp)
 {
+	struct thermal_trip trip;
+	u32 temperature_threshold = control_temp;
 	int ret;
-	int switch_on_temp;
-	u32 temperature_threshold;
 	s32 k_i;
 
-	ret = tz->ops->get_trip_temp(tz, trip_switch_on, &switch_on_temp);
-	if (ret)
-		switch_on_temp = 0;
+	ret = thermal_zone_get_trip(tz, trip_switch_on, &trip);
+	if (!ret)
+		temperature_threshold -= trip.temperature;
 
-	temperature_threshold = control_temp - switch_on_temp;
 	/*
 	 * estimate_pid_constants() tries to find appropriate default
 	 * values for thermal zones that don't provide them. If a
@@ -528,10 +527,10 @@ static void get_governor_trips(struct thermal_zone_device *tz,
 	last_passive = INVALID_TRIP;
 
 	for (i = 0; i < tz->num_trips; i++) {
-		enum thermal_trip_type type;
+		struct thermal_trip trip;
 		int ret;
 
-		ret = tz->ops->get_trip_type(tz, i, &type);
+		ret = thermal_zone_get_trip(tz, i, &trip);
 		if (ret) {
 			dev_warn(&tz->device,
 				 "Failed to get trip point %d type: %d\n", i,
@@ -539,14 +538,14 @@ static void get_governor_trips(struct thermal_zone_device *tz,
 			continue;
 		}
 
-		if (type == THERMAL_TRIP_PASSIVE) {
+		if (trip.type == THERMAL_TRIP_PASSIVE) {
 			if (!found_first_passive) {
 				params->trip_switch_on = i;
 				found_first_passive = true;
 			} else  {
 				last_passive = i;
 			}
-		} else if (type == THERMAL_TRIP_ACTIVE) {
+		} else if (trip.type == THERMAL_TRIP_ACTIVE) {
 			last_active = i;
 		} else {
 			break;
@@ -643,7 +642,7 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 {
 	int ret;
 	struct power_allocator_params *params;
-	int control_temp;
+	struct thermal_trip trip;
 
 	ret = check_power_actors(tz);
 	if (ret)
@@ -669,13 +668,12 @@ static int power_allocator_bind(struct thermal_zone_device *tz)
 	get_governor_trips(tz, params);
 
 	if (tz->num_trips > 0) {
-		ret = tz->ops->get_trip_temp(tz,
-					params->trip_max_desired_temperature,
-					&control_temp);
+		ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature,
+					    &trip);
 		if (!ret)
 			estimate_pid_constants(tz, tz->tzp->sustainable_power,
 					       params->trip_switch_on,
-					       control_temp);
+					       trip.temperature);
 	}
 
 	reset_pid_controller(params);
@@ -705,24 +703,23 @@ static void power_allocator_unbind(struct thermal_zone_device *tz)
 	tz->governor_data = NULL;
 }
 
-static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
+static int power_allocator_throttle(struct thermal_zone_device *tz, int trip_id)
 {
-	int ret;
-	int switch_on_temp, control_temp;
 	struct power_allocator_params *params = tz->governor_data;
+	struct thermal_trip trip;
+	int ret;
 	bool update;
 
 	/*
 	 * We get called for every trip point but we only need to do
 	 * our calculations once
 	 */
-	if (trip != params->trip_max_desired_temperature)
+	if (trip_id != params->trip_max_desired_temperature)
 		return 0;
 
-	ret = tz->ops->get_trip_temp(tz, params->trip_switch_on,
-				     &switch_on_temp);
-	if (!ret && (tz->temperature < switch_on_temp)) {
-		update = (tz->last_temperature >= switch_on_temp);
+	ret = thermal_zone_get_trip(tz, params->trip_switch_on, &trip);
+	if (!ret && (tz->temperature < trip.temperature)) {
+		update = (tz->last_temperature >= trip.temperature);
 		tz->passive = 0;
 		reset_pid_controller(params);
 		allow_maximum_power(tz, update);
@@ -731,16 +728,14 @@ static int power_allocator_throttle(struct thermal_zone_device *tz, int trip)
 
 	tz->passive = 1;
 
-	ret = tz->ops->get_trip_temp(tz, params->trip_max_desired_temperature,
-				&control_temp);
+	ret = thermal_zone_get_trip(tz, params->trip_max_desired_temperature, &trip);
 	if (ret) {
-		dev_warn(&tz->device,
-			 "Failed to get the maximum desired temperature: %d\n",
+		dev_warn(&tz->device, "Failed to get the maximum desired temperature: %d\n",
 			 ret);
 		return ret;
 	}
 
-	return allocate_power(tz, control_temp);
+	return allocate_power(tz, trip.temperature);
 }
 
 static struct thermal_governor thermal_gov_power_allocator = {
diff --git a/drivers/thermal/gov_step_wise.c b/drivers/thermal/gov_step_wise.c
index 9729b46d0258..886016c7cd3d 100644
--- a/drivers/thermal/gov_step_wise.c
+++ b/drivers/thermal/gov_step_wise.c
@@ -95,32 +95,30 @@ static void update_passive_instance(struct thermal_zone_device *tz,
 		tz->passive += value;
 }
 
-static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip_id)
 {
-	int trip_temp;
-	enum thermal_trip_type trip_type;
 	enum thermal_trend trend;
 	struct thermal_instance *instance;
+	struct thermal_trip trip;
 	bool throttle = false;
 	int old_target;
 
-	tz->ops->get_trip_temp(tz, trip, &trip_temp);
-	tz->ops->get_trip_type(tz, trip, &trip_type);
+	thermal_zone_get_trip(tz, trip_id, &trip);
 
-	trend = get_tz_trend(tz, trip);
+	trend = get_tz_trend(tz, trip_id);
 
-	if (tz->temperature >= trip_temp) {
+	if (tz->temperature >= trip.temperature) {
 		throttle = true;
-		trace_thermal_zone_trip(tz, trip, trip_type);
+		trace_thermal_zone_trip(tz, trip_id, trip.type);
 	}
 
 	dev_dbg(&tz->device, "Trip%d[type=%d,temp=%d]:trend=%d,throttle=%d\n",
-				trip, trip_type, trip_temp, trend, throttle);
+				trip_id, trip.type, trip.temperature, trend, throttle);
 
 	mutex_lock(&tz->lock);
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
-		if (instance->trip != trip)
+		if (instance->trip != trip_id)
 			continue;
 
 		old_target = instance->target;
@@ -134,11 +132,11 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
 		/* Activate a passive thermal instance */
 		if (old_target == THERMAL_NO_TARGET &&
 			instance->target != THERMAL_NO_TARGET)
-			update_passive_instance(tz, trip_type, 1);
+			update_passive_instance(tz, trip.type, 1);
 		/* Deactivate a passive thermal instance */
 		else if (old_target != THERMAL_NO_TARGET &&
 			instance->target == THERMAL_NO_TARGET)
-			update_passive_instance(tz, trip_type, -1);
+			update_passive_instance(tz, trip.type, -1);
 
 		instance->initialized = true;
 		mutex_lock(&instance->cdev->lock);
-- 
2.34.1

[PATCH v2 04/26] thermal/drivers/st: Use generic trip points

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert to the generic trip points

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/st/st_thermal.c | 47 +++++----------------------------
 1 file changed, 7 insertions(+), 40 deletions(-)

diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c
index 1276b95604fe..c0d45cdd1c2f 100644
--- a/drivers/thermal/st/st_thermal.c
+++ b/drivers/thermal/st/st_thermal.c
@@ -134,48 +134,12 @@ static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
 	return 0;
 }
 
-static int st_thermal_get_trip_type(struct thermal_zone_device *th,
-				int trip, enum thermal_trip_type *type)
-{
-	struct st_thermal_sensor *sensor = th->devdata;
-	struct device *dev = sensor->dev;
-
-	switch (trip) {
-	case 0:
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
-		dev_err(dev, "invalid trip point\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
-				    int trip, int *temp)
-{
-	struct st_thermal_sensor *sensor = th->devdata;
-	struct device *dev = sensor->dev;
-
-	switch (trip) {
-	case 0:
-		*temp = mcelsius(sensor->cdata->crit_temp);
-		break;
-	default:
-		dev_err(dev, "Invalid trip point\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static struct thermal_zone_device_ops st_tz_ops = {
 	.get_temp	= st_thermal_get_temp,
-	.get_trip_type	= st_thermal_get_trip_type,
-	.get_trip_temp	= st_thermal_get_trip_temp,
 };
 
+static struct thermal_trip trip;
+
 int st_thermal_register(struct platform_device *pdev,
 			const struct of_device_id *st_thermal_of_match)
 {
@@ -238,9 +202,12 @@ int st_thermal_register(struct platform_device *pdev,
 
 	polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
 
+	trip.temperature = sensor->cdata->crit_temp;
+	trip.type = THERMAL_TRIP_CRITICAL;
+	
 	sensor->thermal_dev =
-		thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
-					     &st_tz_ops, NULL, 0, polling_delay);
+		thermal_zone_device_register_with_trips(dev_name(dev), &trip, 1, 0, sensor,
+							&st_tz_ops, NULL, 0, polling_delay);
 	if (IS_ERR(sensor->thermal_dev)) {
 		dev_err(dev, "failed to register thermal zone device\n");
 		ret = PTR_ERR(sensor->thermal_dev);
-- 
2.34.1

[PATCH v2 05/26] thermal/drivers/tegra: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

Replace a single call to thermal_zone_get_trip() to get a trip point
instead of calling the different ops->get_trip*

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/tegra/soctherm.c        | 33 +++++++++++--------------
 drivers/thermal/tegra/tegra30-tsensor.c | 17 ++++++-------
 2 files changed, 22 insertions(+), 28 deletions(-)

diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 1efe470f31e9..96b541458ccd 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -582,23 +582,23 @@ static int tsensor_group_thermtrip_get(struct tegra_soctherm *ts, int id)
 	return temp;
 }
 
-static int tegra_thermctl_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+static int tegra_thermctl_set_trip_temp(struct thermal_zone_device *tz, int trip_id, int temp)
 {
 	struct tegra_thermctl_zone *zone = tz->devdata;
 	struct tegra_soctherm *ts = zone->ts;
+	struct thermal_trip trip;
 	const struct tegra_tsensor_group *sg = zone->sg;
 	struct device *dev = zone->dev;
-	enum thermal_trip_type type;
 	int ret;
 
 	if (!tz)
 		return -EINVAL;
 
-	ret = tz->ops->get_trip_type(tz, trip, &type);
+	ret = thermal_zone_get_trip(tz, trip_id, &trip);
 	if (ret)
 		return ret;
 
-	if (type == THERMAL_TRIP_CRITICAL) {
+	if (trip.type == THERMAL_TRIP_CRITICAL) {
 		/*
 		 * If thermtrips property is set in DT,
 		 * doesn't need to program critical type trip to HW,
@@ -609,7 +609,7 @@ static int tegra_thermctl_set_trip_temp(struct thermal_zone_device *tz, int trip
 		else
 			return 0;
 
-	} else if (type == THERMAL_TRIP_HOT) {
+	} else if (trip.type == THERMAL_TRIP_HOT) {
 		int i;
 
 		for (i = 0; i < THROTTLE_SIZE; i++) {
@@ -620,7 +620,7 @@ static int tegra_thermctl_set_trip_temp(struct thermal_zone_device *tz, int trip
 				continue;
 
 			cdev = ts->throt_cfgs[i].cdev;
-			if (get_thermal_instance(tz, cdev, trip))
+			if (get_thermal_instance(tz, cdev, trip_id))
 				stc = find_throttle_cfg_by_name(ts, cdev->type);
 			else
 				continue;
@@ -687,25 +687,20 @@ static const struct thermal_zone_device_ops tegra_of_thermal_ops = {
 	.set_trips = tegra_thermctl_set_trips,
 };
 
-static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp)
+static int get_hot_temp(struct thermal_zone_device *tz, int *trip_id, int *temp)
 {
-	int ntrips, i, ret;
-	enum thermal_trip_type type;
+	int i, ret;
+	struct thermal_trip trip;
 
-	ntrips = of_thermal_get_ntrips(tz);
-	if (ntrips <= 0)
-		return -EINVAL;
+	for (i = 0; i < thermal_zone_get_num_trips(tz); i++) {
 
-	for (i = 0; i < ntrips; i++) {
-		ret = tz->ops->get_trip_type(tz, i, &type);
+		ret = thermal_zone_get_trip(tz, i, &trip);
 		if (ret)
 			return -EINVAL;
-		if (type == THERMAL_TRIP_HOT) {
-			ret = tz->ops->get_trip_temp(tz, i, temp);
-			if (!ret)
-				*trip = i;
 
-			return ret;
+		if (trip.type == THERMAL_TRIP_HOT) {
+			*trip_id = i;
+			return 0;	
 		}
 	}
 
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
index c34501287e96..cbaad2245f1d 100644
--- a/drivers/thermal/tegra/tegra30-tsensor.c
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -316,18 +316,17 @@ static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
 	*hot_trip  = 85000;
 	*crit_trip = 90000;
 
-	for (i = 0; i < tzd->num_trips; i++) {
-		enum thermal_trip_type type;
-		int trip_temp;
+	for (i = 0; i < thermal_zone_get_num_trips(tzd); i++) {
 
-		tzd->ops->get_trip_temp(tzd, i, &trip_temp);
-		tzd->ops->get_trip_type(tzd, i, &type);
+		struct thermal_trip trip;
 
-		if (type == THERMAL_TRIP_HOT)
-			*hot_trip = trip_temp;
+		thermal_zone_get_trip(tzd, i, &trip);
+		
+		if (trip.type == THERMAL_TRIP_HOT)
+			*hot_trip = trip.temperature;
 
-		if (type == THERMAL_TRIP_CRITICAL)
-			*crit_trip = trip_temp;
+		if (trip.type == THERMAL_TRIP_CRITICAL)
+			*crit_trip = trip.temperature;
 	}
 
 	/* clamp hardware trips to the calibration limits */
-- 
2.34.1

[PATCH v2 06/26] thermal/drivers/imx: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/imx_thermal.c | 72 +++++++++++++----------------------
 1 file changed, 27 insertions(+), 45 deletions(-)

diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 16663373b682..fb0d5cab70af 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -76,7 +76,6 @@
 enum imx_thermal_trip {
 	IMX_TRIP_PASSIVE,
 	IMX_TRIP_CRITICAL,
-	IMX_TRIP_NUM,
 };
 
 #define IMX_POLLING_DELAY		2000 /* millisecond */
@@ -115,6 +114,11 @@ struct thermal_soc_data {
 	u32 low_alarm_shift;
 };
 
+static struct thermal_trip trips[] = {
+	[IMX_TRIP_PASSIVE]  = { .type = THERMAL_TRIP_PASSIVE  },
+	[IMX_TRIP_CRITICAL] = { .type = THERMAL_TRIP_CRITICAL },
+};
+
 static struct thermal_soc_data thermal_imx6q_data = {
 	.version = TEMPMON_IMX6Q,
 
@@ -201,8 +205,6 @@ struct imx_thermal_data {
 	struct thermal_cooling_device *cdev;
 	struct regmap *tempmon;
 	u32 c1, c2; /* See formula in imx_init_calib() */
-	int temp_passive;
-	int temp_critical;
 	int temp_max;
 	int alarm_temp;
 	int last_temp;
@@ -279,12 +281,12 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
 
 	/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
 	if (data->socdata->version == TEMPMON_IMX6Q) {
-		if (data->alarm_temp == data->temp_passive &&
-			*temp >= data->temp_passive)
-			imx_set_alarm_temp(data, data->temp_critical);
-		if (data->alarm_temp == data->temp_critical &&
-			*temp < data->temp_passive) {
-			imx_set_alarm_temp(data, data->temp_passive);
+		if (data->alarm_temp == trips[IMX_TRIP_PASSIVE].temperature &&
+			*temp >= trips[IMX_TRIP_PASSIVE].temperature)
+			imx_set_alarm_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
+		if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature &&
+			*temp < trips[IMX_TRIP_PASSIVE].temperature) {
+			imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 			dev_dbg(&tz->device, "thermal alarm off: T < %d\n",
 				data->alarm_temp / 1000);
 		}
@@ -330,29 +332,10 @@ static int imx_change_mode(struct thermal_zone_device *tz,
 	return 0;
 }
 
-static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
-			     enum thermal_trip_type *type)
-{
-	*type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
-					     THERMAL_TRIP_CRITICAL;
-	return 0;
-}
-
 static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct imx_thermal_data *data = tz->devdata;
-
-	*temp = data->temp_critical;
-	return 0;
-}
-
-static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
-			     int *temp)
-{
-	struct imx_thermal_data *data = tz->devdata;
+	*temp = trips[IMX_TRIP_CRITICAL].temperature;
 
-	*temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
-					     data->temp_critical;
 	return 0;
 }
 
@@ -371,10 +354,10 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
 		return -EPERM;
 
 	/* do not allow passive to be set higher than critical */
-	if (temp < 0 || temp > data->temp_critical)
+	if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
 		return -EINVAL;
 
-	data->temp_passive = temp;
+	trips[IMX_TRIP_PASSIVE].temperature = temp;
 
 	imx_set_alarm_temp(data, temp);
 
@@ -423,8 +406,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
 	.unbind = imx_unbind,
 	.get_temp = imx_get_temp,
 	.change_mode = imx_change_mode,
-	.get_trip_type = imx_get_trip_type,
-	.get_trip_temp = imx_get_trip_temp,
 	.get_crit_temp = imx_get_crit_temp,
 	.set_trip_temp = imx_set_trip_temp,
 };
@@ -507,8 +488,8 @@ static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
 	 * Set the critical trip point at 5 °C under max
 	 * Set the passive trip point at 10 °C under max (changeable via sysfs)
 	 */
-	data->temp_critical = data->temp_max - (1000 * 5);
-	data->temp_passive = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_PASSIVE].temperature = data->temp_max - (1000 * 10);
+	trips[IMX_TRIP_CRITICAL].temperature = data->temp_max - (1000 * 5);
 }
 
 static int imx_init_from_tempmon_data(struct platform_device *pdev)
@@ -743,12 +724,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		goto legacy_cleanup;
 	}
 
-	data->tz = thermal_zone_device_register("imx_thermal_zone",
-						IMX_TRIP_NUM,
-						BIT(IMX_TRIP_PASSIVE), data,
-						&imx_tz_ops, NULL,
-						IMX_PASSIVE_DELAY,
-						IMX_POLLING_DELAY);
+	data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
+							   trips,
+							   ARRAY_SIZE(trips),
+							   BIT(IMX_TRIP_PASSIVE), data,
+							   &imx_tz_ops, NULL,
+							   IMX_PASSIVE_DELAY,
+							   IMX_POLLING_DELAY);
 	if (IS_ERR(data->tz)) {
 		ret = PTR_ERR(data->tz);
 		dev_err(&pdev->dev,
@@ -758,8 +740,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
 
 	dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
 		 " critical:%dC passive:%dC\n", data->temp_grade,
-		 data->temp_max / 1000, data->temp_critical / 1000,
-		 data->temp_passive / 1000);
+		 data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
+		 trips[IMX_TRIP_PASSIVE].temperature / 1000);
 
 	/* Enable measurements at ~ 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
@@ -767,10 +749,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
 	regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
 		     measure_freq << data->socdata->measure_freq_shift);
-	imx_set_alarm_temp(data, data->temp_passive);
+	imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
 
 	if (data->socdata->version == TEMPMON_IMX6SX)
-		imx_set_panic_temp(data, data->temp_critical);
+		imx_set_panic_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
 
 	regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
 		     data->socdata->power_down_mask);
-- 
2.34.1

[PATCH v2 07/26] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 41 ++++++++++------------------
 1 file changed, 15 insertions(+), 26 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 51874d0a284c..5204e343d5b0 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tzd = data->tzd;
-	const struct thermal_trip * const trips =
-		of_thermal_get_trip_points(tzd);
 	unsigned int status;
-	int ret = 0, temp, hyst;
-
-	if (!trips) {
-		dev_err(&pdev->dev,
-			"Cannot get trip points from device tree!\n");
-		return -ENODEV;
-	}
+	int ret = 0, temp;
 
 	if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
 		ret = tzd->ops->get_crit_temp(tzd, &temp);
@@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 		/* Write temperature code for rising and falling threshold */
 		for (i = 0; i < ntrips; i++) {
-			/* Write temperature code for rising threshold */
-			ret = tzd->ops->get_trip_temp(tzd, i, &temp);
-			if (ret)
-				goto err;
-			temp /= MCELSIUS;
-			data->tmu_set_trip_temp(data, i, temp);
 
-			/* Write temperature code for falling threshold */
-			ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
+			struct thermal_trip trip;
+			
+			ret = thermal_zone_get_trip(tzd, i, &trip);
 			if (ret)
 				goto err;
-			hyst /= MCELSIUS;
-			data->tmu_set_trip_hyst(data, i, temp, hyst);
+
+			data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
+			data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
+						trip.hysteresis / MCELSIUS);
 		}
 
 		data->tmu_clear_irqs(data);
@@ -360,21 +349,21 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 }
 
 static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
-					 int trip, u8 temp)
+					 int trip_id, u8 temp)
 {
-	const struct thermal_trip * const trips =
-		of_thermal_get_trip_points(data->tzd);
+	struct thermal_trip trip;
 	u8 ref, th_code;
 
-	ref = trips[0].temperature / MCELSIUS;
-
-	if (trip == 0) {
+	thermal_zone_get_trip(data->tzd, 0, &trip);
+	ref = trip.temperature / MCELSIUS;
+	
+	if (trip_id == 0) {
 		th_code = temp_to_code(data, ref);
 		writeb(th_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
 	}
 
 	temp -= ref;
-	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip * 4);
+	writeb(temp, data->base + EXYNOS4210_TMU_REG_TRIG_LEVEL0 + trip_id * 4);
 }
 
 /* failing thresholds are not supported on Exynos4210 */
-- 
2.34.1

[PATCH v2 08/26] thermal/drivers/rcar: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/rcar_thermal.c | 49 +++++-----------------------------
 1 file changed, 6 insertions(+), 43 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 4df42d70d867..003457810072 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -278,52 +278,16 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
 	return rcar_thermal_get_current_temp(priv, temp);
 }
 
-static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
-				      int trip, enum thermal_trip_type *type)
-{
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
-	struct device *dev = rcar_priv_to_dev(priv);
-
-	/* see rcar_thermal_get_temp() */
-	switch (trip) {
-	case 0: /* +90 <= temp */
-		*type = THERMAL_TRIP_CRITICAL;
-		break;
-	default:
-		dev_err(dev, "rcar driver trip error\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone,
-				      int trip, int *temp)
-{
-	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
-	struct device *dev = rcar_priv_to_dev(priv);
-
-	/* see rcar_thermal_get_temp() */
-	switch (trip) {
-	case 0: /* +90 <= temp */
-		*temp = MCELSIUS(90);
-		break;
-	default:
-		dev_err(dev, "rcar driver trip error\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static struct thermal_zone_device_ops rcar_thermal_zone_of_ops = {
 	.get_temp	= rcar_thermal_get_temp,
 };
 
 static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
 	.get_temp	= rcar_thermal_get_temp,
-	.get_trip_type	= rcar_thermal_get_trip_type,
-	.get_trip_temp	= rcar_thermal_get_trip_temp,
+};
+
+static struct thermal_trip trips[] = {
+	{ .type = THERMAL_TRIP_CRITICAL, .temperature = 90000 }
 };
 
 /*
@@ -531,9 +495,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 						dev, i, priv,
 						&rcar_thermal_zone_of_ops);
 		} else {
-			priv->zone = thermal_zone_device_register(
-						"rcar_thermal",
-						1, 0, priv,
+			priv->zone = thermal_zone_device_register_with_trips(
+				"rcar_thermal", trips, ARRAY_SIZE(trips), 0, priv,
 						&rcar_thermal_zone_ops, NULL, 0,
 						idle);
 
-- 
2.34.1

[PATCH v2 09/26] thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/uniphier_thermal.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
index 4111d99ef50e..1675174480aa 100644
--- a/drivers/thermal/uniphier_thermal.c
+++ b/drivers/thermal/uniphier_thermal.c
@@ -248,8 +248,7 @@ static int uniphier_tm_probe(struct platform_device *pdev)
 	struct regmap *regmap;
 	struct device_node *parent;
 	struct uniphier_tm_dev *tdev;
-	const struct thermal_trip *trips;
-	int i, ret, irq, ntrips, crit_temp = INT_MAX;
+	int i, ret, irq, crit_temp = INT_MAX;
 
 	tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL);
 	if (!tdev)
@@ -296,20 +295,17 @@ static int uniphier_tm_probe(struct platform_device *pdev)
 		return PTR_ERR(tdev->tz_dev);
 	}
 
-	/* get trip points */
-	trips = of_thermal_get_trip_points(tdev->tz_dev);
-	ntrips = of_thermal_get_ntrips(tdev->tz_dev);
-	if (ntrips > ALERT_CH_NUM) {
-		dev_err(dev, "thermal zone has too many trips\n");
-		return -E2BIG;
-	}
-
 	/* set alert temperatures */
-	for (i = 0; i < ntrips; i++) {
-		if (trips[i].type == THERMAL_TRIP_CRITICAL &&
-		    trips[i].temperature < crit_temp)
-			crit_temp = trips[i].temperature;
-		uniphier_tm_set_alert(tdev, i, trips[i].temperature);
+	for (i = 0; i < thermal_zone_get_num_trips(tdev->tz_dev); i++) {
+
+		struct thermal_trip trip;
+
+		thermal_zone_get_trip(tdev->tz_dev, i, &trip);
+		
+		if (trip.type == THERMAL_TRIP_CRITICAL &&
+		    trip.temperature < crit_temp)
+			crit_temp = trip.temperature;
+		uniphier_tm_set_alert(tdev, i, trip.temperature);
 		tdev->alert_en[i] = true;
 	}
 	if (crit_temp > CRITICAL_TEMP_LIMIT) {
-- 
2.34.1

[PATCH v2 10/26] thermal/drivers/hisi: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/hisi_thermal.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index cc5da71b6f55..914dc73f4263 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -490,7 +490,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
 					struct hisi_thermal_sensor *sensor)
 {
 	int ret, i;
-	const struct thermal_trip *trip;
+	struct thermal_trip trip;
 
 	sensor->tzd = devm_thermal_of_zone_register(&pdev->dev,
 						    sensor->id, sensor,
@@ -503,11 +503,12 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
 		return ret;
 	}
 
-	trip = of_thermal_get_trip_points(sensor->tzd);
+	for (i = 0; i < thermal_zone_get_num_trips(sensor->tzd); i++) {
 
-	for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) {
-		if (trip[i].type == THERMAL_TRIP_PASSIVE) {
-			sensor->thres_temp = trip[i].temperature;
+		thermal_zone_get_trip(sensor->tzd, i, &trip);
+
+		if (trip.type == THERMAL_TRIP_PASSIVE) {
+			sensor->thres_temp = trip.temperature;
 			break;
 		}
 	}
-- 
2.34.1

[PATCH v2 11/26] thermal/drivers/qcom: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
---
 drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 39 +++++++++------------
 1 file changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index be785ab37e53..127e8c90211c 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -263,17 +263,17 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
 	return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
 }
 
-static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip, int temp)
+static int qpnp_tm_set_trip_temp(struct thermal_zone_device *tz, int trip_id, int temp)
 {
 	struct qpnp_tm_chip *chip = tz->devdata;
-	const struct thermal_trip *trip_points;
+	struct thermal_trip trip;
 	int ret;
 
-	trip_points = of_thermal_get_trip_points(chip->tz_dev);
-	if (!trip_points)
-		return -EINVAL;
+	ret = thermal_zone_get_trip(chip->tz_dev, trip_id, &trip);
+	if (ret)
+		return ret;
 
-	if (trip_points[trip].type != THERMAL_TRIP_CRITICAL)
+	if (trip.type != THERMAL_TRIP_CRITICAL)
 		return 0;
 
 	mutex_lock(&chip->lock);
@@ -299,22 +299,17 @@ static irqreturn_t qpnp_tm_isr(int irq, void *data)
 
 static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip)
 {
-	int ntrips;
-	const struct thermal_trip *trips;
-	int i;
-
-	ntrips = of_thermal_get_ntrips(chip->tz_dev);
-	if (ntrips <= 0)
-		return THERMAL_TEMP_INVALID;
-
-	trips = of_thermal_get_trip_points(chip->tz_dev);
-	if (!trips)
-		return THERMAL_TEMP_INVALID;
-
-	for (i = 0; i < ntrips; i++) {
-		if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
-		    trips[i].type == THERMAL_TRIP_CRITICAL)
-			return trips[i].temperature;
+	struct thermal_trip trip;
+	int i, ret;
+
+	for (i = 0; i < thermal_zone_get_num_trips(chip->tz_dev); i++) {
+
+		ret = thermal_zone_get_trip(chip->tz_dev, i, &trip);
+		if (ret)
+			continue;
+
+		if (trip.type == THERMAL_TRIP_CRITICAL)
+			return trip.temperature;
 	}
 
 	return THERMAL_TEMP_INVALID;
-- 
2.34.1

[PATCH v2 12/26] thermal/drivers/OF: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

The thermal OF code uses the thermal_zone_device_register_with_trips()
function. It builds the trips array and pass it to the register
function. That means the get_trip_* ops are duplicated with what does
already the core code.

Remove them.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_of.c | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index fd2fb84bf246..70171fb4283f 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -71,39 +71,6 @@ of_thermal_get_trip_points(struct thermal_zone_device *tz)
 }
 EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
 
-static int of_thermal_get_trip_type(struct thermal_zone_device *tz, int trip,
-				    enum thermal_trip_type *type)
-{
-	if (trip >= tz->num_trips || trip < 0)
-		return -EDOM;
-
-	*type = tz->trips[trip].type;
-
-	return 0;
-}
-
-static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
-				    int *temp)
-{
-	if (trip >= tz->num_trips || trip < 0)
-		return -EDOM;
-
-	*temp = tz->trips[trip].temperature;
-
-	return 0;
-}
-
-static int of_thermal_get_trip_hyst(struct thermal_zone_device *tz, int trip,
-				    int *hyst)
-{
-	if (trip >= tz->num_trips || trip < 0)
-		return -EDOM;
-
-	*hyst = tz->trips[trip].hysteresis;
-
-	return 0;
-}
-
 static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 				    int hyst)
 {
@@ -670,9 +637,6 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 		goto out_kfree_trips;
 	}
 
-	of_ops->get_trip_type = of_ops->get_trip_type ? : of_thermal_get_trip_type;
-	of_ops->get_trip_temp = of_ops->get_trip_temp ? : of_thermal_get_trip_temp;
-	of_ops->get_trip_hyst = of_ops->get_trip_hyst ? : of_thermal_get_trip_hyst;
 	of_ops->set_trip_hyst = of_ops->set_trip_hyst ? : of_thermal_set_trip_hyst;
 	of_ops->get_crit_temp = of_ops->get_crit_temp ? : of_thermal_get_crit_temp;
 	of_ops->bind = thermal_of_bind;
-- 
2.34.1

[PATCH v2 13/26] thermal/drivers/armada: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/armada_thermal.c | 39 ++++++++++++++++----------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 52d63b3997fe..9444e5a22ca0 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -785,33 +785,34 @@ static int armada_configure_overheat_int(struct armada_thermal_priv *priv,
 					 int sensor_id)
 {
 	/* Retrieve the critical trip point to enable the overheat interrupt */
-	const struct thermal_trip *trips = of_thermal_get_trip_points(tz);
+	struct thermal_trip trip;
 	int ret;
 	int i;
 
-	if (!trips)
-		return -EINVAL;
-
-	for (i = 0; i < of_thermal_get_ntrips(tz); i++)
-		if (trips[i].type == THERMAL_TRIP_CRITICAL)
-			break;
+	for (i = 0; i < thermal_zone_get_num_trips(tz); i++) {
 
-	if (i == of_thermal_get_ntrips(tz))
-		return -EINVAL;
+		ret = thermal_zone_get_trip(tz, i, &trip);
+		if (ret)
+			return ret;
+		
+		if (trip.type != THERMAL_TRIP_CRITICAL) 
+			continue;
 
-	ret = armada_select_channel(priv, sensor_id);
-	if (ret)
-		return ret;
+		ret = armada_select_channel(priv, sensor_id);
+		if (ret)
+			return ret;
+		
+		armada_set_overheat_thresholds(priv, trip.temperature,
+					       trip.hysteresis);
+		priv->overheat_sensor = tz;
+		priv->interrupt_source = sensor_id;
 
-	armada_set_overheat_thresholds(priv,
-				       trips[i].temperature,
-				       trips[i].hysteresis);
-	priv->overheat_sensor = tz;
-	priv->interrupt_source = sensor_id;
+		armada_enable_overheat_interrupt(priv);
 
-	armada_enable_overheat_interrupt(priv);
+		return 0;
+	}
 
-	return 0;
+	return -EINVAL;
 }
 
 static int armada_thermal_probe(struct platform_device *pdev)
-- 
2.34.1

[PATCH v2 14/26] thermal/core/OF: Remove unused functions

[Daniel Lezcano]

Remove the dead code: of_thermal_get_trip_points()

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.h |  7 -------
 drivers/thermal/thermal_of.c   | 17 -----------------
 2 files changed, 24 deletions(-)

diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 194e98a5b102..04565746afbf 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -145,8 +145,6 @@ thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
 #ifdef CONFIG_THERMAL_OF
 int of_thermal_get_ntrips(struct thermal_zone_device *);
 bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
-const struct thermal_trip *
-of_thermal_get_trip_points(struct thermal_zone_device *);
 #else
 static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz)
 {
@@ -157,11 +155,6 @@ static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz,
 {
 	return false;
 }
-static inline const struct thermal_trip *
-of_thermal_get_trip_points(struct thermal_zone_device *tz)
-{
-	return NULL;
-}
 #endif
 
 int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index 70171fb4283f..d8bba0009194 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -54,23 +54,6 @@ bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip)
 }
 EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid);
 
-/**
- * of_thermal_get_trip_points - function to get access to a globally exported
- *				trip points
- *
- * @tz:	pointer to a thermal zone
- *
- * This function provides a pointer to trip points table
- *
- * Return: pointer to trip points table, NULL otherwise
- */
-const struct thermal_trip *
-of_thermal_get_trip_points(struct thermal_zone_device *tz)
-{
-	return tz->trips;
-}
-EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
-
 static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 				    int hyst)
 {
-- 
2.34.1

[PATCH v2 15/26] thermal/drivers/rcar_gen3: Use the generic function to get the number of trips

[Daniel Lezcano]

The thermal core framework allows to get the number of thermal trips,
use it instead of visiting the thermal core structure internals.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/rcar_gen3_thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 40ec63ad0a1b..6a6aaad2bcac 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -525,7 +525,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		if (ret)
 			goto error_unregister;
 
-		ret = of_thermal_get_ntrips(tsc->zone);
+		ret = thermal_zone_get_num_trips(tsc->zone);
 		if (ret < 0)
 			goto error_unregister;
 
-- 
2.34.1

[PATCH v2 16/26] thermal/drivers/exynos: of_thermal_get_ntrips()

[Daniel Lezcano]

The thermal core framework allows to get the number of thermal trips,
use it instead of visiting the thermal core structure internals.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 5204e343d5b0..ac47c716c1f0 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -260,6 +260,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tzd = data->tzd;
+	int num_trips = thermal_zone_get_num_trips(tzd);
 	unsigned int status;
 	int ret = 0, temp;
 
@@ -271,12 +272,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		goto out;
 	}
 
-	if (of_thermal_get_ntrips(tzd) > data->ntrip) {
+	if (num_trips > data->ntrip) {
 		dev_info(&pdev->dev,
 			 "More trip points than supported by this TMU.\n");
 		dev_info(&pdev->dev,
 			 "%d trip points should be configured in polling mode.\n",
-			 (of_thermal_get_ntrips(tzd) - data->ntrip));
+			 num_trips - data->ntrip);
 	}
 
 	mutex_lock(&data->lock);
@@ -289,7 +290,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 		ret = -EBUSY;
 	} else {
 		int i, ntrips =
-			min_t(int, of_thermal_get_ntrips(tzd), data->ntrip);
+			min_t(int, num_trips, data->ntrip);
 
 		data->tmu_initialize(pdev);
 
-- 
2.34.1

[PATCH v2 17/26] thermal/core/of: Remove of_thermal_get_ntrips()

[Daniel Lezcano]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.h |  5 -----
 drivers/thermal/thermal_of.c   | 16 ----------------
 2 files changed, 21 deletions(-)

diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 04565746afbf..ed60b3be9082 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -143,13 +143,8 @@ thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
 
 /* device tree support */
 #ifdef CONFIG_THERMAL_OF
-int of_thermal_get_ntrips(struct thermal_zone_device *);
 bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
 #else
-static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz)
-{
-	return 0;
-}
 static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz,
 					    int trip)
 {
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index d8bba0009194..d1208b196b21 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -19,22 +19,6 @@
 
 #include "thermal_core.h"
 
-/**
- * of_thermal_get_ntrips - function to export number of available trip
- *			   points.
- * @tz: pointer to a thermal zone
- *
- * This function is a globally visible wrapper to get number of trip points
- * stored in the local struct __thermal_zone
- *
- * Return: number of available trip points, -ENODEV when data not available
- */
-int of_thermal_get_ntrips(struct thermal_zone_device *tz)
-{
-	return tz->num_trips;
-}
-EXPORT_SYMBOL_GPL(of_thermal_get_ntrips);
-
 /**
  * of_thermal_is_trip_valid - function to check if trip point is valid
  *
-- 
2.34.1

[PATCH v2 18/26] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Daniel Lezcano]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/samsung/exynos_tmu.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index ac47c716c1f0..9def8c76ef9a 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -552,13 +552,15 @@ static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
@@ -582,13 +584,15 @@ static void exynos5433_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, pd_det_en, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
@@ -613,13 +617,15 @@ static void exynos7_tmu_control(struct platform_device *pdev, bool on)
 {
 	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
 	struct thermal_zone_device *tz = data->tzd;
+	struct thermal_trip trip;
 	unsigned int con, interrupt_en = 0, i;
 
 	con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
 
 	if (on) {
 		for (i = 0; i < data->ntrip; i++) {
-			if (!of_thermal_is_trip_valid(tz, i))
+
+			if (thermal_zone_get_trip(tz, i, &trip))
 				continue;
 
 			interrupt_en |=
-- 
2.34.1

[PATCH v2 19/26] thermal/core/of: Remove of_thermal_is_trip_valid()

[Daniel Lezcano]

There is no benefit with the of_thermal_is_trip_valid() function as it
does the check the thermal_zone_get_trip() is already doing for the
sake of getting the trip point.

As all the calls have been replaced by thermal_zone_get_trip(), there
is no more users of of_thermal_is_trip_valid().

Remove the function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/thermal_core.h | 10 ----------
 drivers/thermal/thermal_of.c   | 19 -------------------
 2 files changed, 29 deletions(-)

diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index ed60b3be9082..b66e12f49042 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -142,16 +142,6 @@ thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
 #endif /* CONFIG_THERMAL_STATISTICS */
 
 /* device tree support */
-#ifdef CONFIG_THERMAL_OF
-bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
-#else
-static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz,
-					    int trip)
-{
-	return false;
-}
-#endif
-
 int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
 
 #endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index d1208b196b21..ded7ea2fc794 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -19,25 +19,6 @@
 
 #include "thermal_core.h"
 
-/**
- * of_thermal_is_trip_valid - function to check if trip point is valid
- *
- * @tz:	pointer to a thermal zone
- * @trip:	trip point to evaluate
- *
- * This function is responsible for checking if passed trip point is valid
- *
- * Return: true if trip point is valid, false otherwise
- */
-bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip)
-{
-	if (trip >= tz->num_trips || trip < 0)
-		return false;
-
-	return true;
-}
-EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid);
-
 static int of_thermal_set_trip_hyst(struct thermal_zone_device *tz, int trip,
 				    int hyst)
 {
-- 
2.34.1

[PATCH v2 20/26] thermal/drivers/broadcom: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 2c67841a1115..5485e59d03a9 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/thermal.h>
 
+#include "../thermal_core.h"
 #include "../thermal_hwmon.h"
 
 #define BCM2835_TS_TSENSCTL			0x00
@@ -224,7 +225,8 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 	 */
 	val = readl(data->regs + BCM2835_TS_TSENSCTL);
 	if (!(val & BCM2835_TS_TSENSCTL_RSTB)) {
-		int trip_temp, offset, slope;
+		struct thermal_trip trip;
+		int offset, slope;
 
 		slope = thermal_zone_get_slope(tz);
 		offset = thermal_zone_get_offset(tz);
@@ -232,7 +234,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		 * For now we deal only with critical, otherwise
 		 * would need to iterate
 		 */
-		err = tz->ops->get_trip_temp(tz, 0, &trip_temp);
+		err = thermal_zone_get_trip(tz, 0, &trip);
 		if (err < 0) {
 			dev_err(&pdev->dev,
 				"Not able to read trip_temp: %d\n",
@@ -249,7 +251,7 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		val |= (0xFE << BCM2835_TS_TSENSCTL_RSTDELAY_SHIFT);
 
 		/*  trip_adc value from info */
-		val |= bcm2835_thermal_temp2adc(trip_temp,
+		val |= bcm2835_thermal_temp2adc(trip.temperature,
 						offset,
 						slope)
 			<< BCM2835_TS_TSENSCTL_THOLD_SHIFT;
-- 
2.34.1

[PATCH v2 21/26] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/da9062-thermal.c | 52 +++++---------------------------
 1 file changed, 8 insertions(+), 44 deletions(-)

diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
index 180edec34e07..1e163e90d6b6 100644
--- a/drivers/thermal/da9062-thermal.c
+++ b/drivers/thermal/da9062-thermal.c
@@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
-					int trip,
-					enum thermal_trip_type *type)
-{
-	struct da9062_thermal *thermal = z->devdata;
-
-	switch (trip) {
-	case 0:
-		*type = THERMAL_TRIP_HOT;
-		break;
-	default:
-		dev_err(thermal->dev,
-			"Driver does not support more than 1 trip-wire\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
-					int trip,
-					int *temp)
-{
-	struct da9062_thermal *thermal = z->devdata;
-
-	switch (trip) {
-	case 0:
-		*temp = DA9062_MILLI_CELSIUS(125);
-		break;
-	default:
-		dev_err(thermal->dev,
-			"Driver does not support more than 1 trip-wire\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
 static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 				   int *temp)
 {
@@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct thermal_zone_device *z,
 
 static struct thermal_zone_device_ops da9062_thermal_ops = {
 	.get_temp	= da9062_thermal_get_temp,
-	.get_trip_type	= da9062_thermal_get_trip_type,
-	.get_trip_temp	= da9062_thermal_get_trip_temp,
+};
+
+static struct thermal_trip trips[] = {
+	{ .temperature = DA9062_MILLI_CELSIUS(125), .type = THERMAL_TRIP_HOT },
 };
 
 static const struct da9062_thermal_config da9062_config = {
@@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
 	mutex_init(&thermal->lock);
 
-	thermal->zone = thermal_zone_device_register(thermal->config->name,
-					1, 0, thermal,
-					&da9062_thermal_ops, NULL, pp_tmp,
-					0);
+	thermal->zone = thermal_zone_device_register_with_trips(thermal->config->name,
+								trips, ARRAY_SIZE(trips), 0, thermal,
+								&da9062_thermal_ops, NULL, pp_tmp,
+								0);
 	if (IS_ERR(thermal->zone)) {
 		dev_err(&pdev->dev, "Cannot register thermal zone device\n");
 		ret = PTR_ERR(thermal->zone);
-- 
2.34.1

[PATCH v2 22/26] thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ti_thermal_trip_is_valid()

[Daniel Lezcano]

The macros:

ti_thermal_get_trip_value()
 ti_thermal_trip_is_valid()

are unused. Remove them.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/ti-soc-thermal/ti-thermal.h | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal.h b/drivers/thermal/ti-soc-thermal/ti-thermal.h
index c388ecf31834..4fd2c20182d7 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal.h
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal.h
@@ -38,21 +38,6 @@
 /* Update rates */
 #define FAST_TEMP_MONITORING_RATE				250
 
-/* helper macros */
-/**
- * ti_thermal_get_trip_value - returns trip temperature based on index
- * @i:	trip index
- */
-#define ti_thermal_get_trip_value(i)					\
-	(OMAP_TRIP_HOT + ((i) * OMAP_TRIP_STEP))
-
-/**
- * ti_thermal_is_valid_trip - check for trip index
- * @i:	trip index
- */
-#define ti_thermal_is_valid_trip(trip)				\
-	((trip) >= 0 && (trip) < OMAP_TRIP_NUMBER)
-
 #ifdef CONFIG_TI_THERMAL
 int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, char *domain);
 int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id);
-- 
2.34.1

[PATCH v2 23/26] thermal/drivers/acerhdf: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Kästle <peter@piie.net>
---
 drivers/platform/x86/acerhdf.c | 73 ++++++++++++----------------------
 1 file changed, 26 insertions(+), 47 deletions(-)

diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 3463629f8764..a7407aa032ba 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -46,6 +46,8 @@
  * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So,
  * assume 89°C is critical temperature.
  */
+#define ACERHDF_DEFAULT_TEMP_FANON 60000
+#define ACERHDF_DEFAULT_TEMP_FANOFF 53000
 #define ACERHDF_TEMP_CRIT 89000
 #define ACERHDF_FAN_OFF 0
 #define ACERHDF_FAN_AUTO 1
@@ -70,8 +72,8 @@ static int kernelmode;
 #endif
 
 static unsigned int interval = 10;
-static unsigned int fanon = 60000;
-static unsigned int fanoff = 53000;
+static unsigned int fanon = ACERHDF_DEFAULT_TEMP_FANON;
+static unsigned int fanoff = ACERHDF_DEFAULT_TEMP_FANOFF;
 static unsigned int verbose;
 static unsigned int list_supported;
 static unsigned int fanstate = ACERHDF_FAN_AUTO;
@@ -137,6 +139,15 @@ struct ctrl_settings {
 	int mcmd_enable;
 };
 
+static struct thermal_trip trips[] = {
+	[0] = { .temperature = ACERHDF_DEFAULT_TEMP_FANON,
+		.hysteresis = ACERHDF_DEFAULT_TEMP_FANON - ACERHDF_DEFAULT_TEMP_FANOFF,
+		.type = THERMAL_TRIP_ACTIVE },
+
+	[1] = { .temperature = ACERHDF_TEMP_CRIT,
+		.type = THERMAL_TRIP_CRITICAL }
+};
+
 static struct ctrl_settings ctrl_cfg __read_mostly;
 
 /* Register addresses and values for different BIOS versions */
@@ -326,6 +337,15 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
 		fanon = ACERHDF_MAX_FANON;
 	}
 
+	if (fanon < fanoff) {
+		pr_err("fanoff temperature (%d) is above fanon temperature (%d), clamping to %d\n",
+		       fanoff, fanon, fanon);
+		fanoff = fanon;
+	};
+
+	trips[0].temperature = fanon;
+	trips[0].hysteresis  = fanon - fanoff;
+
 	if (kernelmode && prev_interval != interval) {
 		if (interval > ACERHDF_MAX_INTERVAL) {
 			pr_err("interval too high, set to %d\n",
@@ -424,43 +444,6 @@ static int acerhdf_change_mode(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static int acerhdf_get_trip_type(struct thermal_zone_device *thermal, int trip,
-				 enum thermal_trip_type *type)
-{
-	if (trip == 0)
-		*type = THERMAL_TRIP_ACTIVE;
-	else if (trip == 1)
-		*type = THERMAL_TRIP_CRITICAL;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
-static int acerhdf_get_trip_hyst(struct thermal_zone_device *thermal, int trip,
-				 int *temp)
-{
-	if (trip != 0)
-		return -EINVAL;
-
-	*temp = fanon - fanoff;
-
-	return 0;
-}
-
-static int acerhdf_get_trip_temp(struct thermal_zone_device *thermal, int trip,
-				 int *temp)
-{
-	if (trip == 0)
-		*temp = fanon;
-	else if (trip == 1)
-		*temp = ACERHDF_TEMP_CRIT;
-	else
-		return -EINVAL;
-
-	return 0;
-}
-
 static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
 				 int *temperature)
 {
@@ -474,13 +457,9 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
 	.unbind = acerhdf_unbind,
 	.get_temp = acerhdf_get_ec_temp,
 	.change_mode = acerhdf_change_mode,
-	.get_trip_type = acerhdf_get_trip_type,
-	.get_trip_hyst = acerhdf_get_trip_hyst,
-	.get_trip_temp = acerhdf_get_trip_temp,
 	.get_crit_temp = acerhdf_get_crit_temp,
 };
 
-
 /*
  * cooling device callback functions
  * get maximal fan cooling state
@@ -710,10 +689,10 @@ static int __init acerhdf_register_thermal(void)
 	if (IS_ERR(cl_dev))
 		return -EINVAL;
 
-	thz_dev = thermal_zone_device_register("acerhdf", 2, 0, NULL,
-					      &acerhdf_dev_ops,
-					      &acerhdf_zone_params, 0,
-					      (kernelmode) ? interval*1000 : 0);
+	thz_dev = thermal_zone_device_register_with_trips("acerhdf", trips, ARRAY_SIZE(trips),
+							  0, NULL, &acerhdf_dev_ops,
+							  &acerhdf_zone_params, 0,
+							  (kernelmode) ? interval*1000 : 0);
 	if (IS_ERR(thz_dev))
 		return -EINVAL;
 
-- 
2.34.1

[PATCH v2 24/26] thermal/drivers/cxgb4: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4.h    |  2 -
 .../ethernet/chelsio/cxgb4/cxgb4_thermal.c    | 41 ++++---------------
 2 files changed, 8 insertions(+), 35 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 5657ac8cfca0..fca9533bc011 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -1079,8 +1079,6 @@ struct mbox_list {
 #if IS_ENABLED(CONFIG_THERMAL)
 struct ch_thermal {
 	struct thermal_zone_device *tzdev;
-	int trip_temp;
-	int trip_type;
 };
 #endif
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c
index 9a6d65243334..1d49cfe3e2ab 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c
@@ -29,36 +29,12 @@ static int cxgb4_thermal_get_temp(struct thermal_zone_device *tzdev,
 	return 0;
 }
 
-static int cxgb4_thermal_get_trip_type(struct thermal_zone_device *tzdev,
-				       int trip, enum thermal_trip_type *type)
-{
-	struct adapter *adap = tzdev->devdata;
-
-	if (!adap->ch_thermal.trip_temp)
-		return -EINVAL;
-
-	*type = adap->ch_thermal.trip_type;
-	return 0;
-}
-
-static int cxgb4_thermal_get_trip_temp(struct thermal_zone_device *tzdev,
-				       int trip, int *temp)
-{
-	struct adapter *adap = tzdev->devdata;
-
-	if (!adap->ch_thermal.trip_temp)
-		return -EINVAL;
-
-	*temp = adap->ch_thermal.trip_temp;
-	return 0;
-}
-
 static struct thermal_zone_device_ops cxgb4_thermal_ops = {
 	.get_temp = cxgb4_thermal_get_temp,
-	.get_trip_type = cxgb4_thermal_get_trip_type,
-	.get_trip_temp = cxgb4_thermal_get_trip_temp,
 };
 
+static struct thermal_trip trip = { .type = THERMAL_TRIP_CRITICAL } ;
+
 int cxgb4_thermal_init(struct adapter *adap)
 {
 	struct ch_thermal *ch_thermal = &adap->ch_thermal;
@@ -79,15 +55,14 @@ int cxgb4_thermal_init(struct adapter *adap)
 	if (ret < 0) {
 		num_trip = 0; /* could not get trip temperature */
 	} else {
-		ch_thermal->trip_temp = val * 1000;
-		ch_thermal->trip_type = THERMAL_TRIP_CRITICAL;
+		trip.temperature = val * 1000;
 	}
-
+	
 	snprintf(ch_tz_name, sizeof(ch_tz_name), "cxgb4_%s", adap->name);
-	ch_thermal->tzdev = thermal_zone_device_register(ch_tz_name, num_trip,
-							 0, adap,
-							 &cxgb4_thermal_ops,
-							 NULL, 0, 0);
+	ch_thermal->tzdev = thermal_zone_device_register_with_trips(ch_tz_name, &trip, num_trip,
+								    0, adap,
+								    &cxgb4_thermal_ops,
+								    NULL, 0, 0);
 	if (IS_ERR(ch_thermal->tzdev)) {
 		ret = PTR_ERR(ch_thermal->tzdev);
 		dev_err(adap->pdev_dev, "Failed to register thermal zone\n");
-- 
2.34.1

[PATCH v2 25/26] thermal/intel/int340x: Replace parameter to simplify

[Daniel Lezcano]

In the process of replacing the get_trip_* ops by the generic trip
points, the current code has an 'override' property to add another
indirection to a different ops.

Rework this approach to prevent this indirection and make the code
ready for the generic trip points conversion.

Actually the get_temp() is different regarding the platform, so it is
pointless to add a new set of ops but just create dynamically the ops
at init time.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 .../int340x_thermal/int340x_thermal_zone.c    | 31 ++++++++-----------
 .../int340x_thermal/int340x_thermal_zone.h    |  4 +--
 .../processor_thermal_device.c                | 10 ++----
 3 files changed, 18 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
index 62c0aa5d0783..10731b9a140a 100644
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c
@@ -18,9 +18,6 @@ static int int340x_thermal_get_zone_temp(struct thermal_zone_device *zone,
 	unsigned long long tmp;
 	acpi_status status;
 
-	if (d->override_ops && d->override_ops->get_temp)
-		return d->override_ops->get_temp(zone, temp);
-
 	status = acpi_evaluate_integer(d->adev->handle, "_TMP", NULL, &tmp);
 	if (ACPI_FAILURE(status))
 		return -EIO;
@@ -46,9 +43,6 @@ static int int340x_thermal_get_trip_temp(struct thermal_zone_device *zone,
 	struct int34x_thermal_zone *d = zone->devdata;
 	int i;
 
-	if (d->override_ops && d->override_ops->get_trip_temp)
-		return d->override_ops->get_trip_temp(zone, trip, temp);
-
 	if (trip < d->aux_trip_nr)
 		*temp = d->aux_trips[trip];
 	else if (trip == d->crt_trip_id)
@@ -79,9 +73,6 @@ static int int340x_thermal_get_trip_type(struct thermal_zone_device *zone,
 	struct int34x_thermal_zone *d = zone->devdata;
 	int i;
 
-	if (d->override_ops && d->override_ops->get_trip_type)
-		return d->override_ops->get_trip_type(zone, trip, type);
-
 	if (trip < d->aux_trip_nr)
 		*type = THERMAL_TRIP_PASSIVE;
 	else if (trip == d->crt_trip_id)
@@ -112,9 +103,6 @@ static int int340x_thermal_set_trip_temp(struct thermal_zone_device *zone,
 	acpi_status status;
 	char name[10];
 
-	if (d->override_ops && d->override_ops->set_trip_temp)
-		return d->override_ops->set_trip_temp(zone, trip, temp);
-
 	snprintf(name, sizeof(name), "PAT%d", trip);
 	status = acpi_execute_simple_method(d->adev->handle, name,
 			millicelsius_to_deci_kelvin(temp));
@@ -134,9 +122,6 @@ static int int340x_thermal_get_trip_hyst(struct thermal_zone_device *zone,
 	acpi_status status;
 	unsigned long long hyst;
 
-	if (d->override_ops && d->override_ops->get_trip_hyst)
-		return d->override_ops->get_trip_hyst(zone, trip, temp);
-
 	status = acpi_evaluate_integer(d->adev->handle, "GTSH", NULL, &hyst);
 	if (ACPI_FAILURE(status))
 		*temp = 0;
@@ -217,7 +202,7 @@ static struct thermal_zone_params int340x_thermal_params = {
 };
 
 struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
-				struct thermal_zone_device_ops *override_ops)
+						     int (*get_temp) (struct thermal_zone_device *, int *))
 {
 	struct int34x_thermal_zone *int34x_thermal_zone;
 	acpi_status status;
@@ -231,8 +216,15 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
 		return ERR_PTR(-ENOMEM);
 
 	int34x_thermal_zone->adev = adev;
-	int34x_thermal_zone->override_ops = override_ops;
 
+	int34x_thermal_zone->ops = kmemdup(&int340x_thermal_zone_ops,
+					   sizeof(int340x_thermal_zone_ops), GFP_KERNEL);
+	if (!int34x_thermal_zone->ops)
+		goto err_ops_alloc;
+
+	if (get_temp)
+		int34x_thermal_zone->ops->get_temp = get_temp;
+	
 	status = acpi_evaluate_integer(adev->handle, "PATC", NULL, &trip_cnt);
 	if (ACPI_FAILURE(status))
 		trip_cnt = 0;
@@ -262,7 +254,7 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
 						acpi_device_bid(adev),
 						trip_cnt,
 						trip_mask, int34x_thermal_zone,
-						&int340x_thermal_zone_ops,
+						int34x_thermal_zone->ops,
 						&int340x_thermal_params,
 						0, 0);
 	if (IS_ERR(int34x_thermal_zone->zone)) {
@@ -281,6 +273,8 @@ struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *adev,
 	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
 	kfree(int34x_thermal_zone->aux_trips);
 err_trip_alloc:
+	kfree(int34x_thermal_zone->ops);
+err_ops_alloc:
 	kfree(int34x_thermal_zone);
 	return ERR_PTR(ret);
 }
@@ -292,6 +286,7 @@ void int340x_thermal_zone_remove(struct int34x_thermal_zone
 	thermal_zone_device_unregister(int34x_thermal_zone->zone);
 	acpi_lpat_free_conversion_table(int34x_thermal_zone->lpat_table);
 	kfree(int34x_thermal_zone->aux_trips);
+	kfree(int34x_thermal_zone->ops);
 	kfree(int34x_thermal_zone);
 }
 EXPORT_SYMBOL_GPL(int340x_thermal_zone_remove);
diff --git a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h
index 3b4971df1b33..e28ab1ba5e06 100644
--- a/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h
+++ b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h
@@ -29,13 +29,13 @@ struct int34x_thermal_zone {
 	int hot_temp;
 	int hot_trip_id;
 	struct thermal_zone_device *zone;
-	struct thermal_zone_device_ops *override_ops;
+	struct thermal_zone_device_ops *ops;
 	void *priv_data;
 	struct acpi_lpat_conversion_table *lpat_table;
 };
 
 struct int34x_thermal_zone *int340x_thermal_zone_add(struct acpi_device *,
-				struct thermal_zone_device_ops *override_ops);
+				int (*get_temp) (struct thermal_zone_device *, int *));
 void int340x_thermal_zone_remove(struct int34x_thermal_zone *);
 int int340x_thermal_read_trips(struct int34x_thermal_zone *int34x_zone);
 
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index a8d98f1bd6c6..317703027ce9 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -207,10 +207,6 @@ static int proc_thermal_get_zone_temp(struct thermal_zone_device *zone,
 	return ret;
 }
 
-static struct thermal_zone_device_ops proc_thermal_local_ops = {
-	.get_temp       = proc_thermal_get_zone_temp,
-};
-
 static int proc_thermal_read_ppcc(struct proc_thermal_device *proc_priv)
 {
 	int i;
@@ -285,7 +281,7 @@ int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
 	struct acpi_device *adev;
 	acpi_status status;
 	unsigned long long tmp;
-	struct thermal_zone_device_ops *ops = NULL;
+	int (*get_temp) (struct thermal_zone_device *, int *) = NULL;
 	int ret;
 
 	adev = ACPI_COMPANION(dev);
@@ -304,10 +300,10 @@ int proc_thermal_add(struct device *dev, struct proc_thermal_device *proc_priv)
 		/* there is no _TMP method, add local method */
 		stored_tjmax = get_tjmax();
 		if (stored_tjmax > 0)
-			ops = &proc_thermal_local_ops;
+			get_temp = proc_thermal_get_zone_temp;
 	}
 
-	proc_priv->int340x_zone = int340x_thermal_zone_add(adev, ops);
+	proc_priv->int340x_zone = int340x_thermal_zone_add(adev, get_temp);
 	if (IS_ERR(proc_priv->int340x_zone)) {
 		return PTR_ERR(proc_priv->int340x_zone);
 	} else
-- 
2.34.1

[PATCH v2 26/26] thermal/drivers/intel: Use generic thermal_zone_get_trip() function

[Daniel Lezcano]

The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.

Convert ops content logic into generic trip points and register them with the
thermal zone.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---
 drivers/thermal/intel/x86_pkg_temp_thermal.c | 120 ++++++++++---------
 1 file changed, 66 insertions(+), 54 deletions(-)

diff --git a/drivers/thermal/intel/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c
index 4d8edc61a78b..c28a98c82f97 100644
--- a/drivers/thermal/intel/x86_pkg_temp_thermal.c
+++ b/drivers/thermal/intel/x86_pkg_temp_thermal.c
@@ -53,6 +53,7 @@ struct zone_device {
 	u32				msr_pkg_therm_high;
 	struct delayed_work		work;
 	struct thermal_zone_device	*tzone;
+	struct thermal_trip		*trips;
 	struct cpumask			cpumask;
 };
 
@@ -138,40 +139,6 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
 	return -EINVAL;
 }
 
-static int sys_get_trip_temp(struct thermal_zone_device *tzd,
-			     int trip, int *temp)
-{
-	struct zone_device *zonedev = tzd->devdata;
-	unsigned long thres_reg_value;
-	u32 mask, shift, eax, edx;
-	int ret;
-
-	if (trip >= MAX_NUMBER_OF_TRIPS)
-		return -EINVAL;
-
-	if (trip) {
-		mask = THERM_MASK_THRESHOLD1;
-		shift = THERM_SHIFT_THRESHOLD1;
-	} else {
-		mask = THERM_MASK_THRESHOLD0;
-		shift = THERM_SHIFT_THRESHOLD0;
-	}
-
-	ret = rdmsr_on_cpu(zonedev->cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
-			   &eax, &edx);
-	if (ret < 0)
-		return ret;
-
-	thres_reg_value = (eax & mask) >> shift;
-	if (thres_reg_value)
-		*temp = zonedev->tj_max - thres_reg_value * 1000;
-	else
-		*temp = THERMAL_TEMP_INVALID;
-	pr_debug("sys_get_trip_temp %d\n", *temp);
-
-	return 0;
-}
-
 static int
 sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
 {
@@ -212,18 +179,9 @@ sys_set_trip_temp(struct thermal_zone_device *tzd, int trip, int temp)
 			l, h);
 }
 
-static int sys_get_trip_type(struct thermal_zone_device *thermal, int trip,
-			     enum thermal_trip_type *type)
-{
-	*type = THERMAL_TRIP_PASSIVE;
-	return 0;
-}
-
 /* Thermal zone callback registry */
 static struct thermal_zone_device_ops tzone_ops = {
 	.get_temp = sys_get_curr_temp,
-	.get_trip_temp = sys_get_trip_temp,
-	.get_trip_type = sys_get_trip_type,
 	.set_trip_temp = sys_set_trip_temp,
 };
 
@@ -328,6 +286,48 @@ static int pkg_thermal_notify(u64 msr_val)
 	return 0;
 }
 
+static struct thermal_trip *pkg_temp_thermal_trips_init(int cpu, int tj_max, int num_trips)
+{
+	struct thermal_trip *trips;
+	unsigned long thres_reg_value;
+	u32 mask, shift, eax, edx;
+	int ret, i;
+
+	trips = kzalloc(sizeof(*trips) * num_trips, GFP_KERNEL);
+	if (!trips)
+		return ERR_PTR(-ENOMEM);
+	
+	for (i = 0; i < num_trips; i++) {
+
+		if (i) {
+			mask = THERM_MASK_THRESHOLD1;
+			shift = THERM_SHIFT_THRESHOLD1;
+		} else {
+			mask = THERM_MASK_THRESHOLD0;
+			shift = THERM_SHIFT_THRESHOLD0;
+		}
+
+		ret = rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
+				   &eax, &edx);
+		if (ret < 0) {
+			kfree(trips);
+			return ERR_PTR(ret);
+		}
+
+		thres_reg_value = (eax & mask) >> shift;
+
+		trips[i].temperature = thres_reg_value ?
+			tj_max - thres_reg_value * 1000 : THERMAL_TEMP_INVALID;
+
+		trips[i].type = THERMAL_TRIP_PASSIVE;
+		
+		pr_debug("%s: cpu=%d, trip=%d, temp=%d\n",
+			 __func__, cpu, i, trips[i].temperature);
+	}
+
+	return trips;
+}
+
 static int pkg_temp_thermal_device_add(unsigned int cpu)
 {
 	int id = topology_logical_die_id(cpu);
@@ -353,24 +353,27 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
 	if (!zonedev)
 		return -ENOMEM;
 
+	zonedev->trips = pkg_temp_thermal_trips_init(cpu, tj_max, thres_count);
+	if (IS_ERR(zonedev->trips)) {
+		err = PTR_ERR(zonedev->trips);
+		goto out_kfree_zonedev;
+	}
+	
 	INIT_DELAYED_WORK(&zonedev->work, pkg_temp_thermal_threshold_work_fn);
 	zonedev->cpu = cpu;
 	zonedev->tj_max = tj_max;
-	zonedev->tzone = thermal_zone_device_register("x86_pkg_temp",
-			thres_count,
+	zonedev->tzone = thermal_zone_device_register_with_trips("x86_pkg_temp",
+			zonedev->trips, thres_count,
 			(thres_count == MAX_NUMBER_OF_TRIPS) ? 0x03 : 0x01,
 			zonedev, &tzone_ops, &pkg_temp_tz_params, 0, 0);
 	if (IS_ERR(zonedev->tzone)) {
 		err = PTR_ERR(zonedev->tzone);
-		kfree(zonedev);
-		return err;
+		goto out_kfree_trips;
 	}
 	err = thermal_zone_device_enable(zonedev->tzone);
-	if (err) {
-		thermal_zone_device_unregister(zonedev->tzone);
-		kfree(zonedev);
-		return err;
-	}
+	if (err)
+		goto out_unregister_tz;
+
 	/* Store MSR value for package thermal interrupt, to restore at exit */
 	rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, zonedev->msr_pkg_therm_low,
 	      zonedev->msr_pkg_therm_high);
@@ -379,7 +382,14 @@ static int pkg_temp_thermal_device_add(unsigned int cpu)
 	raw_spin_lock_irq(&pkg_temp_lock);
 	zones[id] = zonedev;
 	raw_spin_unlock_irq(&pkg_temp_lock);
-	return 0;
+
+out_unregister_tz:	
+	thermal_zone_device_unregister(zonedev->tzone);
+out_kfree_trips:
+	kfree(zonedev->trips);
+out_kfree_zonedev:
+	kfree(zonedev);
+	return err;
 }
 
 static int pkg_thermal_cpu_offline(unsigned int cpu)
@@ -463,8 +473,10 @@ static int pkg_thermal_cpu_offline(unsigned int cpu)
 	raw_spin_unlock_irq(&pkg_temp_lock);
 
 	/* Final cleanup if this is the last cpu */
-	if (lastcpu)
+	if (lastcpu) {
+		kfree(zonedev->trips);
 		kfree(zonedev);
+	}
 	return 0;
 }
 
-- 
2.34.1

RE: [PATCH v2 21/26] thermal/drivers/da9062: Use generic thermal_zone_get_trip() function

[DLG Adam Ward]

On 09 August 2022 23:05, Daniel Lezcano wrote:

> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops are
> needed and they can be removed.
> 
> Convert ops content logic into generic trip points and register them with the
> thermal zone.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>

> ---
>  drivers/thermal/da9062-thermal.c | 52 +++++---------------------------
>  1 file changed, 8 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-
> thermal.c
> index 180edec34e07..1e163e90d6b6 100644
> --- a/drivers/thermal/da9062-thermal.c
> +++ b/drivers/thermal/da9062-thermal.c
> @@ -120,44 +120,6 @@ static irqreturn_t da9062_thermal_irq_handler(int
> irq, void *data)
>  	return IRQ_HANDLED;
>  }
> 
> -static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
> -					int trip,
> -					enum thermal_trip_type *type)
> -{
> -	struct da9062_thermal *thermal = z->devdata;
> -
> -	switch (trip) {
> -	case 0:
> -		*type = THERMAL_TRIP_HOT;
> -		break;
> -	default:
> -		dev_err(thermal->dev,
> -			"Driver does not support more than 1 trip-wire\n");
> -		return -EINVAL;
> -	}
> -
> -	return 0;
> -}
> -
> -static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
> -					int trip,
> -					int *temp)
> -{
> -	struct da9062_thermal *thermal = z->devdata;
> -
> -	switch (trip) {
> -	case 0:
> -		*temp = DA9062_MILLI_CELSIUS(125);
> -		break;
> -	default:
> -		dev_err(thermal->dev,
> -			"Driver does not support more than 1 trip-wire\n");
> -		return -EINVAL;
> -	}
> -
> -	return 0;
> -}
> -
>  static int da9062_thermal_get_temp(struct thermal_zone_device *z,
>  				   int *temp)
>  {
> @@ -172,8 +134,10 @@ static int da9062_thermal_get_temp(struct
> thermal_zone_device *z,
> 
>  static struct thermal_zone_device_ops da9062_thermal_ops = {
>  	.get_temp	= da9062_thermal_get_temp,
> -	.get_trip_type	= da9062_thermal_get_trip_type,
> -	.get_trip_temp	= da9062_thermal_get_trip_temp,
> +};
> +
> +static struct thermal_trip trips[] = {
> +	{ .temperature = DA9062_MILLI_CELSIUS(125), .type =
> THERMAL_TRIP_HOT },
>  };
> 
>  static const struct da9062_thermal_config da9062_config = {
> @@ -228,10 +192,10 @@ static int da9062_thermal_probe(struct
> platform_device *pdev)
>  	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
>  	mutex_init(&thermal->lock);
> 
> -	thermal->zone = thermal_zone_device_register(thermal->config-
> >name,
> -					1, 0, thermal,
> -					&da9062_thermal_ops, NULL,
> pp_tmp,
> -					0);
> +	thermal->zone = thermal_zone_device_register_with_trips(thermal-
> >config->name,
> +								trips,
> ARRAY_SIZE(trips), 0, thermal,
> +
> 	&da9062_thermal_ops, NULL, pp_tmp,
> +								0);
>  	if (IS_ERR(thermal->zone)) {
>  		dev_err(&pdev->dev, "Cannot register thermal zone
> device\n");
>  		ret = PTR_ERR(thermal->zone);
> --
> 2.34.1

Re: [PATCH v2 07/26] thermal/drivers/exynos: Use generic thermal_zone_get_trip() function

[Krzysztof Kozlowski]

On 10/08/2022 01:04, Daniel Lezcano wrote:
> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops are
> needed and they can be removed.
> 
> Convert ops content logic into generic trip points and register them with the
> thermal zone.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>  drivers/thermal/samsung/exynos_tmu.c | 41 ++++++++++------------------
>  1 file changed, 15 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> index 51874d0a284c..5204e343d5b0 100644
> --- a/drivers/thermal/samsung/exynos_tmu.c
> +++ b/drivers/thermal/samsung/exynos_tmu.c
> @@ -260,16 +260,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  {
>  	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>  	struct thermal_zone_device *tzd = data->tzd;
> -	const struct thermal_trip * const trips =
> -		of_thermal_get_trip_points(tzd);
>  	unsigned int status;
> -	int ret = 0, temp, hyst;
> -
> -	if (!trips) {
> -		dev_err(&pdev->dev,
> -			"Cannot get trip points from device tree!\n");
> -		return -ENODEV;
> -	}
> +	int ret = 0, temp;
>  
>  	if (data->soc != SOC_ARCH_EXYNOS5433) /* FIXME */
>  		ret = tzd->ops->get_crit_temp(tzd, &temp);
> @@ -303,19 +295,16 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
>  
>  		/* Write temperature code for rising and falling threshold */
>  		for (i = 0; i < ntrips; i++) {
> -			/* Write temperature code for rising threshold */
> -			ret = tzd->ops->get_trip_temp(tzd, i, &temp);
> -			if (ret)
> -				goto err;
> -			temp /= MCELSIUS;
> -			data->tmu_set_trip_temp(data, i, temp);
>  
> -			/* Write temperature code for falling threshold */
> -			ret = tzd->ops->get_trip_hyst(tzd, i, &hyst);
> +			struct thermal_trip trip;
> +			
> +			ret = thermal_zone_get_trip(tzd, i, &trip);
>  			if (ret)
>  				goto err;
> -			hyst /= MCELSIUS;
> -			data->tmu_set_trip_hyst(data, i, temp, hyst);
> +
> +			data->tmu_set_trip_temp(data, i, trip.temperature / MCELSIUS);
> +			data->tmu_set_trip_hyst(data, i, trip.temperature / MCELSIUS,
> +						trip.hysteresis / MCELSIUS);
>  		}
>  
>  		data->tmu_clear_irqs(data);
> @@ -360,21 +349,21 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
>  }
>  
>  static void exynos4210_tmu_set_trip_temp(struct exynos_tmu_data *data,
> -					 int trip, u8 temp)
> +					 int trip_id, u8 temp)
>  {
> -	const struct thermal_trip * const trips =
> -		of_thermal_get_trip_points(data->tzd);
> +	struct thermal_trip trip;
>  	u8 ref, th_code;
>  
> -	ref = trips[0].temperature / MCELSIUS;
> -
> -	if (trip == 0) {
> +	thermal_zone_get_trip(data->tzd, 0, &trip);

This can return error and trip will be uninitialized.


Best regards,
Krzysztof

Re: [PATCH v2 16/26] thermal/drivers/exynos: of_thermal_get_ntrips()

[Krzysztof Kozlowski]

On 10/08/2022 01:04, Daniel Lezcano wrote:
> The thermal core framework allows to get the number of thermal trips,
> use it instead of visiting the thermal core structure internals.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 18/26] thermal/drivers/exynos: Replace of_thermal_is_trip_valid() by thermal_zone_get_trip()

[Krzysztof Kozlowski]

On 10/08/2022 01:04, Daniel Lezcano wrote:
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Missing commit msg.

> ---
>  drivers/thermal/samsung/exynos_tmu.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)



Best regards,
Krzysztof

Re: [PATCH v2 26/26] thermal/drivers/intel: Use generic thermal_zone_get_trip() function

[kernel test robot]

Hi Daniel,

I love your patch! Yet something to improve:

[auto build test ERROR on next-20220809]
[cannot apply to rafael-pm/thermal tegra/for-next linus/master v5.19 v5.19-rc8 v5.19-rc7 v5.19]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Daniel-Lezcano/Rework-the-trip-points-creation/20220810-060933
base:    6c8f479764ebe2848589de3249743ea552ed2495
config: x86_64-rhel-8.3-kselftests (https://download.01.org/0day-ci/archive/20220813/202208130155.HquqN8f2-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.3.0-3) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/b38db2fe0562e475bb6240a64e6f6156352d41d1
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Daniel-Lezcano/Rework-the-trip-points-creation/20220810-060933
        git checkout b38db2fe0562e475bb6240a64e6f6156352d41d1
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>, old ones prefixed by <<):

>> ERROR: modpost: "thermal_zone_device_register_with_trips" [drivers/thermal/intel/x86_pkg_temp_thermal.ko] undefined!
ERROR: modpost: "thermal_zone_device_register_with_trips" [drivers/platform/x86/acerhdf.ko] undefined!

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v2 09/26] thermal/drivers/uniphier: Use generic thermal_zone_get_trip() function

[Kunihiko Hayashi]

On 2022/08/10 7:04, Daniel Lezcano wrote:
> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops are
> needed and they can be removed.
> 
> Convert ops content logic into generic trip points and register them with
> the
> thermal zone.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> ---
>   drivers/thermal/uniphier_thermal.c | 26 +++++++++++---------------
>   1 file changed, 11 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/thermal/uniphier_thermal.c
> b/drivers/thermal/uniphier_thermal.c
> index 4111d99ef50e..1675174480aa 100644
> --- a/drivers/thermal/uniphier_thermal.c
> +++ b/drivers/thermal/uniphier_thermal.c
> @@ -248,8 +248,7 @@ static int uniphier_tm_probe(struct platform_device
> *pdev)
>   	struct regmap *regmap;
>   	struct device_node *parent;
>   	struct uniphier_tm_dev *tdev;
> -	const struct thermal_trip *trips;
> -	int i, ret, irq, ntrips, crit_temp = INT_MAX;
> +	int i, ret, irq, crit_temp = INT_MAX;
>   
>   	tdev = devm_kzalloc(dev, sizeof(*tdev), GFP_KERNEL);
>   	if (!tdev)
> @@ -296,20 +295,17 @@ static int uniphier_tm_probe(struct platform_device
> *pdev)
>   		return PTR_ERR(tdev->tz_dev);
>   	}
>   
> -	/* get trip points */
> -	trips = of_thermal_get_trip_points(tdev->tz_dev);
> -	ntrips = of_thermal_get_ntrips(tdev->tz_dev);
> -	if (ntrips > ALERT_CH_NUM) {
> -		dev_err(dev, "thermal zone has too many trips\n");
> -		return -E2BIG;
> -	}
> -
>   	/* set alert temperatures */
> -	for (i = 0; i < ntrips; i++) {
> -		if (trips[i].type == THERMAL_TRIP_CRITICAL &&
> -		    trips[i].temperature < crit_temp)
> -			crit_temp = trips[i].temperature;
> -		uniphier_tm_set_alert(tdev, i, trips[i].temperature);
> +	for (i = 0; i < thermal_zone_get_num_trips(tdev->tz_dev); i++) {
> +
> +		struct thermal_trip trip;
> +
> +		thermal_zone_get_trip(tdev->tz_dev, i, &trip);
> +		

I found this line has white spaces. Otherwise,

Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>

> +		if (trip.type == THERMAL_TRIP_CRITICAL &&
> +		    trip.temperature < crit_temp)
> +			crit_temp = trip.temperature;
> +		uniphier_tm_set_alert(tdev, i, trip.temperature);
>   		tdev->alert_en[i] = true;
>   	}
>   	if (crit_temp > CRITICAL_TEMP_LIMIT) {
> 

---
Best Regards
Kunihiko Hayashi

Re: [PATCH v2 08/26] thermal/drivers/rcar: Use generic thermal_zone_get_trip() function

[Niklas Söderlund]

Hi Daniel,

Thanks for your work.

On 2022-08-10 00:04:18 +0200, Daniel Lezcano wrote:
> The thermal framework gives the possibility to register the trip
> points with the thermal zone. When that is done, no get_trip_* ops are
> needed and they can be removed.
> 
> Convert ops content logic into generic trip points and register them with the
> thermal zone.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/thermal/rcar_thermal.c | 49 +++++-----------------------------
>  1 file changed, 6 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
> index 4df42d70d867..003457810072 100644
> --- a/drivers/thermal/rcar_thermal.c
> +++ b/drivers/thermal/rcar_thermal.c
> @@ -278,52 +278,16 @@ static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp)
>  	return rcar_thermal_get_current_temp(priv, temp);
>  }
>  
> -static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone,
> -				      int trip, enum thermal_trip_type *type)
> -{
> -	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
> -	struct device *dev = rcar_priv_to_dev(priv);
> -
> -	/* see rcar_thermal_get_temp() */
> -	switch (trip) {
> -	case 0: /* +90 <= temp */
> -		*type = THERMAL_TRIP_CRITICAL;
> -		break;
> -	default:
> -		dev_err(dev, "rcar driver trip error\n");
> -		return -EINVAL;
> -	}
> -
> -	return 0;
> -}
> -
> -static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone,
> -				      int trip, int *temp)
> -{
> -	struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone);
> -	struct device *dev = rcar_priv_to_dev(priv);
> -
> -	/* see rcar_thermal_get_temp() */
> -	switch (trip) {
> -	case 0: /* +90 <= temp */
> -		*temp = MCELSIUS(90);
> -		break;
> -	default:
> -		dev_err(dev, "rcar driver trip error\n");
> -		return -EINVAL;
> -	}
> -
> -	return 0;
> -}
> -
>  static struct thermal_zone_device_ops rcar_thermal_zone_of_ops = {
>  	.get_temp	= rcar_thermal_get_temp,
>  };
>  
>  static struct thermal_zone_device_ops rcar_thermal_zone_ops = {
>  	.get_temp	= rcar_thermal_get_temp,
> -	.get_trip_type	= rcar_thermal_get_trip_type,
> -	.get_trip_temp	= rcar_thermal_get_trip_temp,
> +};
> +
> +static struct thermal_trip trips[] = {
> +	{ .type = THERMAL_TRIP_CRITICAL, .temperature = 90000 }
>  };
>  
>  /*
> @@ -531,9 +495,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
>  						dev, i, priv,
>  						&rcar_thermal_zone_of_ops);
>  		} else {
> -			priv->zone = thermal_zone_device_register(
> -						"rcar_thermal",
> -						1, 0, priv,
> +			priv->zone = thermal_zone_device_register_with_trips(
> +				"rcar_thermal", trips, ARRAY_SIZE(trips), 0, priv,
>  						&rcar_thermal_zone_ops, NULL, 0,
>  						idle);
>  
> -- 
> 2.34.1
> 

-- 
Kind Regards,
Niklas Söderlund

Re: [PATCH v2 15/26] thermal/drivers/rcar_gen3: Use the generic function to get the number of trips

[Niklas Söderlund]

Hello Daniel,

Thanks for your work.

On 2022-08-10 00:04:25 +0200, Daniel Lezcano wrote:
> The thermal core framework allows to get the number of thermal trips,
> use it instead of visiting the thermal core structure internals.
> 
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/thermal/rcar_gen3_thermal.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
> index 40ec63ad0a1b..6a6aaad2bcac 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -525,7 +525,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
>  		if (ret)
>  			goto error_unregister;
>  
> -		ret = of_thermal_get_ntrips(tsc->zone);
> +		ret = thermal_zone_get_num_trips(tsc->zone);
>  		if (ret < 0)
>  			goto error_unregister;
>  
> -- 
> 2.34.1
> 

-- 
Kind Regards,
Niklas Söderlund