[net-next PATCH 0/4] Add PTP support for CN10K silicon

[net-next PATCH 0/4] Add PTP support for CN10K silicon

[Naveen Mamindlapalli]

This patchset adds PTP support for CN10K silicon, specifically
to workaround few hardware issues and to add 1-step mode.

Patchset overview:

Patch #1 returns correct ptp timestamp in nanoseconds captured
         when external timestamp event occurs.

Patch #2 adds 1-step mode support.

Patch #3 implements software workaround to generate PPS output properly.

Patch #4 provides a software workaround for the rollover register default
         value, which causes ptp to return the wrong timestamp.

Hariprasad Kelam (1):
  octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon

Naveen Mamindlapalli (3):
  octeontx2-af: return correct ptp timestamp for CN10K silicon
  octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon
  octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly

 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |   2 +
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c    | 106 +++++++++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/ptp.h    |   3 +
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c    |  19 +++-
 drivers/net/ethernet/marvell/octeontx2/af/rpm.h    |   5 +
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |   8 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.h    |   1 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  13 +++
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |   8 +-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |  11 +++
 .../net/ethernet/marvell/octeontx2/nic/otx2_ptp.c  | 103 ++++++++++++++-----
 .../ethernet/marvell/octeontx2/nic/otx2_struct.h   |  11 ++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 110 ++++++++++++++++++++-
 13 files changed, 359 insertions(+), 41 deletions(-)

-- 
2.16.5

[net-next PATCH 1/4] octeontx2-af: return correct ptp timestamp for CN10K silicon

[Naveen Mamindlapalli]

The MIO_PTP_TIMESTAMP format has been changed in CN10K silicon
family. The upper 32-bits represents seconds and lower 32-bits
represents nanoseconds. This patch returns nanosecond timestamp
to NIX PF driver.

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 67a6821d2dff..b2c3527fe665 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -56,6 +56,11 @@
 static struct ptp *first_ptp_block;
 static const struct pci_device_id ptp_id_table[];
 
+static bool is_ptp_dev_cn10k(struct ptp *ptp)
+{
+	return (ptp->pdev->device == PCI_DEVID_CN10K_PTP) ? true : false;
+}
+
 static bool cn10k_ptp_errata(struct ptp *ptp)
 {
 	if (ptp->pdev->subsystem_device == PCI_SUBSYS_DEVID_CN10K_A_PTP ||
@@ -282,7 +287,14 @@ void ptp_start(struct ptp *ptp, u64 sclk, u32 ext_clk_freq, u32 extts)
 
 static int ptp_get_tstmp(struct ptp *ptp, u64 *clk)
 {
-	*clk = readq(ptp->reg_base + PTP_TIMESTAMP);
+	u64 timestamp;
+
+	if (is_ptp_dev_cn10k(ptp)) {
+		timestamp = readq(ptp->reg_base + PTP_TIMESTAMP);
+		*clk = (timestamp >> 32) * NSEC_PER_SEC + (timestamp & 0xFFFFFFFF);
+	} else {
+		*clk = readq(ptp->reg_base + PTP_TIMESTAMP);
+	}
 
 	return 0;
 }
-- 
2.16.5

[net-next PATCH 2/4] octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon

[Naveen Mamindlapalli]

From: Hariprasad Kelam <hkelam@marvell.com>

Add support for ptp 1-step mode using timecounter. The seconds and
nanoseconds to be updated in PTP header are calculated by adding the
timecounter offset to the free running PTP clock counter time. The PF
driver periodically gets the PTP clock time using AF mbox. The 1-step
support uses HW feature to update correction field rather than
OriginTimestamp field in PTP header.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c    |  19 +++-
 drivers/net/ethernet/marvell/octeontx2/af/rpm.h    |   5 +
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |   8 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.h    |   1 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  13 +++
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |   8 +-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |  11 +++
 .../net/ethernet/marvell/octeontx2/nic/otx2_ptp.c  |  90 +++++++++++------
 .../ethernet/marvell/octeontx2/nic/otx2_struct.h   |  11 ++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 110 ++++++++++++++++++++-
 10 files changed, 234 insertions(+), 42 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
index ef59de43b11e..a70e1153fa04 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
@@ -415,11 +415,26 @@ void rpm_lmac_ptp_config(void *rpmd, int lmac_id, bool enable)
 		return;
 
 	cfg = rpm_read(rpm, lmac_id, RPMX_CMRX_CFG);
-	if (enable)
+	if (enable) {
 		cfg |= RPMX_RX_TS_PREPEND;
-	else
+		cfg |= RPMX_TX_PTP_1S_SUPPORT;
+	} else {
 		cfg &= ~RPMX_RX_TS_PREPEND;
+		cfg &= ~RPMX_TX_PTP_1S_SUPPORT;
+	}
+
 	rpm_write(rpm, lmac_id, RPMX_CMRX_CFG, cfg);
+
+	cfg = rpm_read(rpm, lmac_id, RPMX_MTI_MAC100X_XIF_MODE);
+
+	if (enable) {
+		cfg |= RPMX_ONESTEP_ENABLE;
+		cfg &= ~RPMX_TS_BINARY_MODE;
+	} else {
+		cfg &= ~RPMX_ONESTEP_ENABLE;
+	}
+
+	rpm_write(rpm, lmac_id, RPMX_MTI_MAC100X_XIF_MODE, cfg);
 }
 
 int rpm_lmac_pfc_config(void *rpmd, int lmac_id, u8 tx_pause, u8 rx_pause, u16 pfc_en)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.h b/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
index c2bd6e54ea51..77f2ef9e1425 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
@@ -16,6 +16,7 @@
 /* Registers */
 #define RPMX_CMRX_CFG			0x00
 #define RPMX_RX_TS_PREPEND              BIT_ULL(22)
+#define RPMX_TX_PTP_1S_SUPPORT          BIT_ULL(17)
 #define RPMX_CMRX_SW_INT                0x180
 #define RPMX_CMRX_SW_INT_W1S            0x188
 #define RPMX_CMRX_SW_INT_ENA_W1S        0x198
@@ -72,6 +73,10 @@
 #define RPMX_MTI_MAC100X_CL89_PAUSE_QUANTA		0x8108
 #define RPM_DEFAULT_PAUSE_TIME                          0x7FF
 
+#define RPMX_MTI_MAC100X_XIF_MODE		        0x8100
+#define RPMX_ONESTEP_ENABLE				BIT_ULL(5)
+#define RPMX_TS_BINARY_MODE				BIT_ULL(11)
+
 /* Function Declarations */
 int rpm_get_nr_lmacs(void *rpmd);
 u8 rpm_get_lmac_type(void *rpmd, int lmac_id);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
index 0879a48411f3..7646bb2ec89b 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c
@@ -4296,8 +4296,14 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw)
 	/* Restore CINT timer delay to HW reset values */
 	rvu_write64(rvu, blkaddr, NIX_AF_CINT_DELAY, 0x0ULL);
 
+	cfg = rvu_read64(rvu, blkaddr, NIX_AF_SEB_CFG);
+
 	/* For better performance use NDC TX instead of NDC RX for SQ's SQEs" */
-	rvu_write64(rvu, blkaddr, NIX_AF_SEB_CFG, 0x1ULL);
+	cfg |= 1ULL;
+	if (!is_rvu_otx2(rvu))
+		cfg |= NIX_PTP_1STEP_EN;
+
+	rvu_write64(rvu, blkaddr, NIX_AF_SEB_CFG, cfg);
 
 	if (is_block_implemented(hw, blkaddr)) {
 		err = nix_setup_txschq(rvu, nix_hw, blkaddr);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
index 77a9ade91f3e..0e0d536645ac 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h
@@ -266,6 +266,7 @@
 #define NIX_AF_TX_NPC_CAPTURE_CONFIG	(0x0660)
 #define NIX_AF_TX_NPC_CAPTURE_INFO	(0x0670)
 #define NIX_AF_SEB_CFG			(0x05F0)
+#define NIX_PTP_1STEP_EN		BIT_ULL(2)
 
 #define NIX_AF_DEBUG_NPC_RESP_DATAX(a)          (0x680 | (a) << 3)
 #define NIX_AF_SMQX_CFG(a)                      (0x700 | (a) << 16)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 23948626b1ef..4c7691a1a1ed 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -243,6 +243,7 @@ struct otx2_hw {
 #define CN10K_MBOX		1
 #define CN10K_LMTST		2
 #define CN10K_RPM		3
+#define CN10K_PTP_ONESTEP	4
 	unsigned long		cap_flag;
 
 #define LMT_LINE_SIZE		128
@@ -276,6 +277,13 @@ struct refill_work {
 	struct otx2_nic *pf;
 };
 
+/* PTPv2 originTimestamp structure */
+struct ptpv2_tstamp {
+	__be16 seconds_msb; /* 16 bits + */
+	__be32 seconds_lsb; /* 32 bits = 48 bits*/
+	__be32 nanoseconds;
+} __packed;
+
 struct otx2_ptp {
 	struct ptp_clock_info ptp_info;
 	struct ptp_clock *ptp_clock;
@@ -291,6 +299,9 @@ struct otx2_ptp {
 	struct ptp_pin_desc extts_config;
 	u64 (*convert_rx_ptp_tstmp)(u64 timestamp);
 	u64 (*convert_tx_ptp_tstmp)(u64 timestamp);
+	struct delayed_work synctstamp_work;
+	u64 tstamp;
+	u32 base_ns;
 };
 
 #define OTX2_HW_TIMESTAMP_LEN	8
@@ -363,6 +374,7 @@ struct otx2_nic {
 #define OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED	BIT_ULL(12)
 #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED	BIT_ULL(13)
 #define OTX2_FLAG_DMACFLTR_SUPPORT		BIT_ULL(14)
+#define OTX2_FLAG_PTP_ONESTEP_SYNC		BIT_ULL(15)
 #define OTX2_FLAG_ADPTV_INT_COAL_ENABLED BIT_ULL(16)
 	u64			flags;
 	u64			*cq_op_addr;
@@ -494,6 +506,7 @@ static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
 		__set_bit(CN10K_MBOX, &hw->cap_flag);
 		__set_bit(CN10K_LMTST, &hw->cap_flag);
 		__set_bit(CN10K_RPM, &hw->cap_flag);
+		__set_bit(CN10K_PTP_ONESTEP, &hw->cap_flag);
 	}
 }
 
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index 5bd16e95370b..0eb74e8c553d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -963,10 +963,12 @@ static int otx2_get_ts_info(struct net_device *netdev,
 
 	info->phc_index = otx2_ptp_clock_index(pfvf);
 
-	info->tx_types = (1 << HWTSTAMP_TX_OFF) | (1 << HWTSTAMP_TX_ON);
+	info->tx_types = BIT(HWTSTAMP_TX_OFF) | BIT(HWTSTAMP_TX_ON);
+	if (test_bit(CN10K_PTP_ONESTEP, &pfvf->hw.cap_flag))
+		info->tx_types |= BIT(HWTSTAMP_TX_ONESTEP_SYNC);
 
-	info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
-			   (1 << HWTSTAMP_FILTER_ALL);
+	info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) |
+			   BIT(HWTSTAMP_FILTER_ALL);
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 49a4ff01cecb..8bf5274cd7e3 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -2038,8 +2038,19 @@ int otx2_config_hwtstamp(struct net_device *netdev, struct ifreq *ifr)
 
 	switch (config.tx_type) {
 	case HWTSTAMP_TX_OFF:
+		if (pfvf->flags & OTX2_FLAG_PTP_ONESTEP_SYNC)
+			pfvf->flags &= ~OTX2_FLAG_PTP_ONESTEP_SYNC;
+
+		cancel_delayed_work(&pfvf->ptp->synctstamp_work);
 		otx2_config_hw_tx_tstamp(pfvf, false);
 		break;
+	case HWTSTAMP_TX_ONESTEP_SYNC:
+		if (!test_bit(CN10K_PTP_ONESTEP, &pfvf->hw.cap_flag))
+			return -ERANGE;
+		pfvf->flags |= OTX2_FLAG_PTP_ONESTEP_SYNC;
+		schedule_delayed_work(&pfvf->ptp->synctstamp_work,
+				      msecs_to_jiffies(500));
+		fallthrough;
 	case HWTSTAMP_TX_ON:
 		otx2_config_hw_tx_tstamp(pfvf, true);
 		break;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
index fdc2c9315b91..743c8a6d5dad 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
@@ -10,6 +10,33 @@
 #include "otx2_common.h"
 #include "otx2_ptp.h"
 
+static u64 otx2_ptp_get_clock(struct otx2_ptp *ptp)
+{
+	struct ptp_req *req;
+	struct ptp_rsp *rsp;
+	int err;
+
+	if (!ptp->nic)
+		return 0;
+
+	req = otx2_mbox_alloc_msg_ptp_op(&ptp->nic->mbox);
+	if (!req)
+		return 0;
+
+	req->op = PTP_OP_GET_CLOCK;
+
+	err = otx2_sync_mbox_msg(&ptp->nic->mbox);
+	if (err)
+		return 0;
+
+	rsp = (struct ptp_rsp *)otx2_mbox_get_rsp(&ptp->nic->mbox.mbox, 0,
+						  &req->hdr);
+	if (IS_ERR(rsp))
+		return 0;
+
+	return rsp->clk;
+}
+
 static int otx2_ptp_adjfine(struct ptp_clock_info *ptp_info, long scaled_ppm)
 {
 	struct otx2_ptp *ptp = container_of(ptp_info, struct otx2_ptp,
@@ -49,29 +76,8 @@ static int ptp_set_thresh(struct otx2_ptp *ptp, u64 thresh)
 static u64 ptp_cc_read(const struct cyclecounter *cc)
 {
 	struct otx2_ptp *ptp = container_of(cc, struct otx2_ptp, cycle_counter);
-	struct ptp_req *req;
-	struct ptp_rsp *rsp;
-	int err;
-
-	if (!ptp->nic)
-		return 0;
-
-	req = otx2_mbox_alloc_msg_ptp_op(&ptp->nic->mbox);
-	if (!req)
-		return 0;
 
-	req->op = PTP_OP_GET_CLOCK;
-
-	err = otx2_sync_mbox_msg(&ptp->nic->mbox);
-	if (err)
-		return 0;
-
-	rsp = (struct ptp_rsp *)otx2_mbox_get_rsp(&ptp->nic->mbox.mbox, 0,
-						  &req->hdr);
-	if (IS_ERR(rsp))
-		return 0;
-
-	return rsp->clk;
+	return otx2_ptp_get_clock(ptp);
 }
 
 static u64 ptp_tstmp_read(struct otx2_ptp *ptp)
@@ -101,6 +107,15 @@ static u64 ptp_tstmp_read(struct otx2_ptp *ptp)
 	return rsp->clk;
 }
 
+static void otx2_get_ptpclock(struct otx2_ptp *ptp, u64 *tstamp)
+{
+	struct otx2_nic *pfvf = ptp->nic;
+
+	mutex_lock(&pfvf->mbox.lock);
+	*tstamp = timecounter_read(&ptp->time_counter);
+	mutex_unlock(&pfvf->mbox.lock);
+}
+
 static int otx2_ptp_adjtime(struct ptp_clock_info *ptp_info, s64 delta)
 {
 	struct otx2_ptp *ptp = container_of(ptp_info, struct otx2_ptp,
@@ -119,14 +134,10 @@ static int otx2_ptp_gettime(struct ptp_clock_info *ptp_info,
 {
 	struct otx2_ptp *ptp = container_of(ptp_info, struct otx2_ptp,
 					    ptp_info);
-	struct otx2_nic *pfvf = ptp->nic;
-	u64 nsec;
+	u64 tstamp;
 
-	mutex_lock(&pfvf->mbox.lock);
-	nsec = timecounter_read(&ptp->time_counter);
-	mutex_unlock(&pfvf->mbox.lock);
-
-	*ts = ns_to_timespec64(nsec);
+	otx2_get_ptpclock(ptp, &tstamp);
+	*ts = ns_to_timespec64(tstamp);
 
 	return 0;
 }
@@ -191,6 +202,23 @@ static void otx2_ptp_extts_check(struct work_struct *work)
 	schedule_delayed_work(&ptp->extts_work, msecs_to_jiffies(200));
 }
 
+static void otx2_sync_tstamp(struct work_struct *work)
+{
+	struct otx2_ptp *ptp = container_of(work, struct otx2_ptp,
+					    synctstamp_work.work);
+	struct otx2_nic *pfvf = ptp->nic;
+	u64 tstamp;
+
+	mutex_lock(&pfvf->mbox.lock);
+	tstamp = otx2_ptp_get_clock(ptp);
+	mutex_unlock(&pfvf->mbox.lock);
+
+	ptp->tstamp = timecounter_cyc2time(&pfvf->ptp->time_counter, tstamp);
+	ptp->base_ns = tstamp % NSEC_PER_SEC;
+
+	schedule_delayed_work(&ptp->synctstamp_work, msecs_to_jiffies(250));
+}
+
 static int otx2_ptp_enable(struct ptp_clock_info *ptp_info,
 			   struct ptp_clock_request *rq, int on)
 {
@@ -302,6 +330,8 @@ int otx2_ptp_init(struct otx2_nic *pfvf)
 		ptp_ptr->convert_tx_ptp_tstmp = &cn10k_ptp_convert_timestamp;
 	}
 
+	INIT_DELAYED_WORK(&ptp_ptr->synctstamp_work, otx2_sync_tstamp);
+
 	pfvf->ptp = ptp_ptr;
 
 error:
@@ -316,6 +346,8 @@ void otx2_ptp_destroy(struct otx2_nic *pfvf)
 	if (!ptp)
 		return;
 
+	cancel_delayed_work(&pfvf->ptp->synctstamp_work);
+
 	ptp_clock_unregister(ptp->ptp_clock);
 	kfree(ptp);
 	pfvf->ptp = NULL;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h
index 4bbd12ff26e6..aa205a0d158f 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h
@@ -236,8 +236,15 @@ struct nix_sqe_sg_s {
 
 /* NIX send memory subdescriptor structure */
 struct nix_sqe_mem_s {
-	u64 offset        : 16; /* W0 */
-	u64 rsvd_51_16    : 36;
+	u64 start_offset  : 8;
+	u64 rsvd_11_8	  : 4;
+	u64 rsvd_12	  : 1;
+	u64 udp_csum_crt  : 1;
+	u64 update64      : 1;
+	u64 rsvd_15_16    : 1;
+	u64 base_ns       : 32;
+	u64 step_type     : 1;
+	u64 rsvd_51_49    : 3;
 	u64 per_lso_seg   : 1;
 	u64 wmem          : 1;
 	u64 dsz           : 2;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
index a18e8efd0f1e..5ec11d71bf60 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
@@ -19,6 +19,12 @@
 #include "cn10k.h"
 
 #define CQE_ADDR(CQ, idx) ((CQ)->cqe_base + ((CQ)->cqe_size * (idx)))
+#define PTP_PORT	        0x13F
+/* PTPv2 header Original Timestamp starts at byte offset 34 and
+ * contains 6 byte seconds field and 4 byte nano seconds field.
+ */
+#define PTP_SYNC_SEC_OFFSET	34
+
 static bool otx2_xdp_rcv_pkt_handler(struct otx2_nic *pfvf,
 				     struct bpf_prog *prog,
 				     struct nix_cqe_rx_s *cqe,
@@ -686,7 +692,8 @@ static void otx2_sqe_add_ext(struct otx2_nic *pfvf, struct otx2_snd_queue *sq,
 }
 
 static void otx2_sqe_add_mem(struct otx2_snd_queue *sq, int *offset,
-			     int alg, u64 iova)
+			     int alg, u64 iova, int ptp_offset,
+			     u64 base_ns, int udp_csum)
 {
 	struct nix_sqe_mem_s *mem;
 
@@ -696,6 +703,13 @@ static void otx2_sqe_add_mem(struct otx2_snd_queue *sq, int *offset,
 	mem->wmem = 1; /* wait for the memory operation */
 	mem->addr = iova;
 
+	if (ptp_offset) {
+		mem->start_offset = ptp_offset;
+		mem->udp_csum_crt = udp_csum;
+		mem->base_ns = base_ns;
+		mem->step_type = 1;
+	}
+
 	*offset += sizeof(*mem);
 }
 
@@ -952,16 +966,102 @@ static int otx2_get_sqe_count(struct otx2_nic *pfvf, struct sk_buff *skb)
 	return skb_shinfo(skb)->gso_segs;
 }
 
+static bool otx2_validate_network_transport(struct sk_buff *skb)
+{
+	if ((ip_hdr(skb)->protocol == IPPROTO_UDP) ||
+	    (ipv6_hdr(skb)->nexthdr == IPPROTO_UDP)) {
+		struct udphdr *udph = udp_hdr(skb);
+
+		if (udph->source == htons(PTP_PORT) &&
+		    udph->dest == htons(PTP_PORT))
+			return true;
+	}
+
+	return false;
+}
+
+static bool otx2_ptp_is_sync(struct sk_buff *skb, int *offset, int *udp_csum)
+{
+	struct ethhdr *eth = (struct ethhdr *)(skb->data);
+	u16 nix_offload_hlen = 0, inner_vhlen = 0;
+	u8 *data = skb->data, *msgtype;
+	__be16 proto = eth->h_proto;
+	int network_depth = 0;
+
+	/* NIX is programmed to offload outer  VLAN header
+	 * in case of single vlan protocol field holds Network header ETH_IP/V6
+	 * in case of stacked vlan protocol field holds Inner vlan (8100)
+	 */
+	if (skb->dev->features & NETIF_F_HW_VLAN_CTAG_TX &&
+	    skb->dev->features & NETIF_F_HW_VLAN_STAG_TX) {
+		if (skb->vlan_proto == htons(ETH_P_8021AD)) {
+			/* Get vlan protocol */
+			proto = __vlan_get_protocol(skb, eth->h_proto, NULL);
+			/* SKB APIs like skb_transport_offset does not include
+			 * offloaded vlan header length. Need to explicitly add
+			 * the length
+			 */
+			nix_offload_hlen = VLAN_HLEN;
+			inner_vhlen = VLAN_HLEN;
+		} else if (skb->vlan_proto == htons(ETH_P_8021Q)) {
+			nix_offload_hlen = VLAN_HLEN;
+		}
+	} else if (eth_type_vlan(eth->h_proto)) {
+		proto = __vlan_get_protocol(skb, eth->h_proto, &network_depth);
+	}
+
+	switch (ntohs(proto)) {
+	case ETH_P_1588:
+		if (network_depth)
+			*offset = network_depth;
+		else
+			*offset = ETH_HLEN + nix_offload_hlen +
+				  inner_vhlen;
+		break;
+	case ETH_P_IP:
+	case ETH_P_IPV6:
+		if (!otx2_validate_network_transport(skb))
+			return false;
+
+		*udp_csum = 1;
+		*offset = nix_offload_hlen + skb_transport_offset(skb) +
+			  sizeof(struct udphdr);
+	}
+
+	msgtype = data + *offset;
+
+	/* Check PTP messageId is SYNC or not */
+	return (*msgtype & 0xf) == 0;
+}
+
 static void otx2_set_txtstamp(struct otx2_nic *pfvf, struct sk_buff *skb,
 			      struct otx2_snd_queue *sq, int *offset)
 {
+	struct ptpv2_tstamp *origin_tstamp;
+	int ptp_offset = 0, udp_csum = 0;
+	struct timespec64 ts;
 	u64 iova;
 
-	if (!skb_shinfo(skb)->gso_size &&
-	    skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
-		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+	if (unlikely(!skb_shinfo(skb)->gso_size &&
+		     (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) {
+		if (unlikely(pfvf->flags & OTX2_FLAG_PTP_ONESTEP_SYNC)) {
+			if (otx2_ptp_is_sync(skb, &ptp_offset, &udp_csum)) {
+				origin_tstamp = (struct ptpv2_tstamp *)
+						((u8 *)skb->data + ptp_offset +
+						 PTP_SYNC_SEC_OFFSET);
+				ts = ns_to_timespec64(pfvf->ptp->tstamp);
+				origin_tstamp->seconds_msb = htons((ts.tv_sec >> 32) & 0xffff);
+				origin_tstamp->seconds_lsb = htonl(ts.tv_sec & 0xffffffff);
+				origin_tstamp->nanoseconds = htonl(ts.tv_nsec);
+				/* Point to correction field in PTP packet */
+				ptp_offset += 8;
+			}
+		} else {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+		}
 		iova = sq->timestamps->iova + (sq->head * sizeof(u64));
-		otx2_sqe_add_mem(sq, offset, NIX_SENDMEMALG_E_SETTSTMP, iova);
+		otx2_sqe_add_mem(sq, offset, NIX_SENDMEMALG_E_SETTSTMP, iova,
+				 ptp_offset, pfvf->ptp->base_ns, udp_csum);
 	} else {
 		skb_tx_timestamp(skb);
 	}
-- 
2.16.5

[net-next PATCH 3/4] octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon

[Naveen Mamindlapalli]

Errata:
The ptp_clock_hi rollsover to zero one clock cycle before it
reaches one second boundary. As a result, the pps threshold
comparison fails after one second and the pps output signal
won't toggle further.

This patch workarounds the issue by programming the pps_lo_incr
register to 500msec minus one clock cycle period, ensuring that
the pps threshold comparison succeeds at one second rollover
boundary and pps edge toggles. After that point, the driver will
have enough time (~500msec) to reset the pps threshold value.
After each one second boundary, hrtimer is invoked which resets
the pps threshold value.

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |  2 +
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c    | 82 +++++++++++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/ptp.h    |  3 +
 .../net/ethernet/marvell/octeontx2/nic/otx2_ptp.c  | 27 +++++--
 4 files changed, 109 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
index d7762577e285..e26c3b0c4dcb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/mbox.h
@@ -1471,6 +1471,7 @@ enum ptp_op {
 	PTP_OP_GET_CLOCK = 1,
 	PTP_OP_GET_TSTMP = 2,
 	PTP_OP_SET_THRESH = 3,
+	PTP_OP_EXTTS_ON = 4,
 };
 
 struct ptp_req {
@@ -1478,6 +1479,7 @@ struct ptp_req {
 	u8 op;
 	s64 scaled_ppm;
 	u64 thresh;
+	int extts_on;
 };
 
 struct ptp_rsp {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index b2c3527fe665..01f7dbad6b92 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -9,6 +9,8 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
 
 #include "ptp.h"
 #include "mbox.h"
@@ -77,6 +79,43 @@ static bool is_ptp_tsfmt_sec_nsec(struct ptp *ptp)
 	return false;
 }
 
+static enum hrtimer_restart ptp_reset_thresh(struct hrtimer *hrtimer)
+{
+	struct ptp *ptp = container_of(hrtimer, struct ptp, hrtimer);
+	ktime_t curr_ts = ktime_get();
+	ktime_t delta_ns, period_ns;
+	u64 ptp_clock_hi;
+
+	/* calculate the elapsed time since last restart */
+	delta_ns = ktime_to_ns(ktime_sub(curr_ts, ptp->last_ts));
+
+	/* if the ptp clock value has crossed 0.5 seconds,
+	 * its too late to update pps threshold value, so
+	 * update threshold after 1 second.
+	 */
+	ptp_clock_hi = readq(ptp->reg_base + PTP_CLOCK_HI);
+	if (ptp_clock_hi > 500000000) {
+		period_ns = ktime_set(0, (NSEC_PER_SEC + 100 - ptp_clock_hi));
+	} else {
+		writeq(500000000, ptp->reg_base + PTP_PPS_THRESH_HI);
+		period_ns = ktime_set(0, (NSEC_PER_SEC + 100 - delta_ns));
+	}
+
+	hrtimer_forward_now(hrtimer, period_ns);
+	ptp->last_ts = curr_ts;
+
+	return HRTIMER_RESTART;
+}
+
+static void ptp_hrtimer_start(struct ptp *ptp, ktime_t start_ns)
+{
+	ktime_t period_ns;
+
+	period_ns = ktime_set(0, (NSEC_PER_SEC + 100 - start_ns));
+	hrtimer_start(&ptp->hrtimer, period_ns, HRTIMER_MODE_REL);
+	ptp->last_ts = ktime_get();
+}
+
 static u64 read_ptp_tstmp_sec_nsec(struct ptp *ptp)
 {
 	u64 sec, sec1, nsec;
@@ -275,6 +314,18 @@ void ptp_start(struct ptp *ptp, u64 sclk, u32 ext_clk_freq, u32 extts)
 	/* Set 50% duty cycle for 1Hz output */
 	writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_HI_INCR);
 	writeq(0x1dcd650000000000, ptp->reg_base + PTP_PPS_LO_INCR);
+	if (cn10k_ptp_errata(ptp)) {
+		/* The ptp_clock_hi rollsover to zero once clock cycle before it
+		 * reaches one second boundary. so, program the pps_lo_incr in
+		 * such a way that the pps threshold value comparison at one
+		 * second boundary will succeed and pps edge changes. After each
+		 * one second boundary, the hrtimer handler will be invoked and
+		 * reprograms the pps threshold value.
+		 */
+		ptp->clock_period = NSEC_PER_SEC / ptp->clock_rate;
+		writeq((0x1dcd6500ULL - ptp->clock_period) << 32,
+		       ptp->reg_base + PTP_PPS_LO_INCR);
+	}
 
 	if (cn10k_ptp_errata(ptp))
 		clock_comp = ptp_calc_adjusted_comp(ptp->clock_rate);
@@ -301,7 +352,25 @@ static int ptp_get_tstmp(struct ptp *ptp, u64 *clk)
 
 static int ptp_set_thresh(struct ptp *ptp, u64 thresh)
 {
-	writeq(thresh, ptp->reg_base + PTP_PPS_THRESH_HI);
+	if (!cn10k_ptp_errata(ptp))
+		writeq(thresh, ptp->reg_base + PTP_PPS_THRESH_HI);
+
+	return 0;
+}
+
+static int ptp_extts_on(struct ptp *ptp, int on)
+{
+	u64 ptp_clock_hi;
+
+	if (cn10k_ptp_errata(ptp)) {
+		if (on) {
+			ptp_clock_hi = readq(ptp->reg_base + PTP_CLOCK_HI);
+			ptp_hrtimer_start(ptp, (ktime_t)ptp_clock_hi);
+		} else {
+			if (hrtimer_active(&ptp->hrtimer))
+				hrtimer_cancel(&ptp->hrtimer);
+		}
+	}
 
 	return 0;
 }
@@ -341,6 +410,11 @@ static int ptp_probe(struct pci_dev *pdev,
 	else
 		ptp->read_ptp_tstmp = &read_ptp_tstmp_nsec;
 
+	if (cn10k_ptp_errata(ptp)) {
+		hrtimer_init(&ptp->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		ptp->hrtimer.function = ptp_reset_thresh;
+	}
+
 	return 0;
 
 error_free:
@@ -365,6 +439,9 @@ static void ptp_remove(struct pci_dev *pdev)
 	struct ptp *ptp = pci_get_drvdata(pdev);
 	u64 clock_cfg;
 
+	if (cn10k_ptp_errata(ptp) && hrtimer_active(&ptp->hrtimer))
+		hrtimer_cancel(&ptp->hrtimer);
+
 	if (IS_ERR_OR_NULL(ptp))
 		return;
 
@@ -432,6 +509,9 @@ int rvu_mbox_handler_ptp_op(struct rvu *rvu, struct ptp_req *req,
 	case PTP_OP_SET_THRESH:
 		err = ptp_set_thresh(rvu->ptp, req->thresh);
 		break;
+	case PTP_OP_EXTTS_ON:
+		err = ptp_extts_on(rvu->ptp, req->extts_on);
+		break;
 	default:
 		err = -EINVAL;
 		break;
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.h b/drivers/net/ethernet/marvell/octeontx2/af/ptp.h
index 95a955159f40..b9d92abc3844 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.h
@@ -17,7 +17,10 @@ struct ptp {
 	void __iomem *reg_base;
 	u64 (*read_ptp_tstmp)(struct ptp *ptp);
 	spinlock_t ptp_lock; /* lock */
+	struct hrtimer hrtimer;
+	ktime_t last_ts;
 	u32 clock_rate;
+	u32 clock_period;
 };
 
 struct ptp *ptp_get(void);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
index 743c8a6d5dad..896b2f9bac34 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
@@ -73,6 +73,23 @@ static int ptp_set_thresh(struct otx2_ptp *ptp, u64 thresh)
 	return otx2_sync_mbox_msg(&ptp->nic->mbox);
 }
 
+static int ptp_extts_on(struct otx2_ptp *ptp, int on)
+{
+	struct ptp_req *req;
+
+	if (!ptp->nic)
+		return -ENODEV;
+
+	req = otx2_mbox_alloc_msg_ptp_op(&ptp->nic->mbox);
+	if (!req)
+		return -ENOMEM;
+
+	req->op = PTP_OP_EXTTS_ON;
+	req->extts_on = on;
+
+	return otx2_sync_mbox_msg(&ptp->nic->mbox);
+}
+
 static u64 ptp_cc_read(const struct cyclecounter *cc)
 {
 	struct otx2_ptp *ptp = container_of(cc, struct otx2_ptp, cycle_counter);
@@ -189,8 +206,6 @@ static void otx2_ptp_extts_check(struct work_struct *work)
 		event.index = 0;
 		event.timestamp = timecounter_cyc2time(&ptp->time_counter, tstmp);
 		ptp_clock_event(ptp->ptp_clock, &event);
-		ptp->last_extts = tstmp;
-
 		new_thresh = tstmp % 500000000;
 		if (ptp->thresh != new_thresh) {
 			mutex_lock(&ptp->nic->mbox.lock);
@@ -198,6 +213,7 @@ static void otx2_ptp_extts_check(struct work_struct *work)
 			mutex_unlock(&ptp->nic->mbox.lock);
 			ptp->thresh = new_thresh;
 		}
+		ptp->last_extts = tstmp;
 	}
 	schedule_delayed_work(&ptp->extts_work, msecs_to_jiffies(200));
 }
@@ -235,10 +251,13 @@ static int otx2_ptp_enable(struct ptp_clock_info *ptp_info,
 				   rq->extts.index);
 		if (pin < 0)
 			return -EBUSY;
-		if (on)
+		if (on) {
+			ptp_extts_on(ptp, on);
 			schedule_delayed_work(&ptp->extts_work, msecs_to_jiffies(200));
-		else
+		} else {
+			ptp_extts_on(ptp, on);
 			cancel_delayed_work_sync(&ptp->extts_work);
+		}
 		return 0;
 	default:
 		break;
-- 
2.16.5

[net-next PATCH 4/4] octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly

[Naveen Mamindlapalli]

Since the reset value of PTP_SEC_ROLLOVER is incorrect on
CNF10KB silicon, the ptp timestamps are inaccurate. This
patch initializes the PTP_SEC_ROLLOVER register properly
for the CNF10KB silicon.

Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
index 01f7dbad6b92..3411e2e47d46 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/ptp.c
@@ -52,12 +52,18 @@
 #define PTP_CLOCK_COMP				0xF18ULL
 #define PTP_TIMESTAMP				0xF20ULL
 #define PTP_CLOCK_SEC				0xFD0ULL
+#define PTP_SEC_ROLLOVER			0xFD8ULL
 
 #define CYCLE_MULT				1000
 
 static struct ptp *first_ptp_block;
 static const struct pci_device_id ptp_id_table[];
 
+static bool is_ptp_dev_cnf10kb(struct ptp *ptp)
+{
+	return (ptp->pdev->subsystem_device == PCI_SUBSYS_DEVID_CNF10K_B_PTP) ? true : false;
+}
+
 static bool is_ptp_dev_cn10k(struct ptp *ptp)
 {
 	return (ptp->pdev->device == PCI_DEVID_CN10K_PTP) ? true : false;
@@ -290,6 +296,10 @@ void ptp_start(struct ptp *ptp, u64 sclk, u32 ext_clk_freq, u32 extts)
 	/* sclk is in MHz */
 	ptp->clock_rate = sclk * 1000000;
 
+	/* Program the seconds rollover value to 1 second */
+	if (is_ptp_dev_cnf10kb(ptp))
+		writeq(0x3b9aca00, ptp->reg_base + PTP_SEC_ROLLOVER);
+
 	/* Enable PTP clock */
 	clock_cfg = readq(ptp->reg_base + PTP_CLOCK_CFG);
 
-- 
2.16.5

Re: [net-next PATCH 0/4] Add PTP support for CN10K silicon

[Richard Cochran]

On Sat, Sep 10, 2022 at 01:24:12PM +0530, Naveen Mamindlapalli wrote:
> This patchset adds PTP support for CN10K silicon, specifically
> to workaround few hardware issues and to add 1-step mode.
> 
> Patchset overview:
> 
> Patch #1 returns correct ptp timestamp in nanoseconds captured
>          when external timestamp event occurs.
> 
> Patch #2 adds 1-step mode support.
> 
> Patch #3 implements software workaround to generate PPS output properly.
> 
> Patch #4 provides a software workaround for the rollover register default
>          value, which causes ptp to return the wrong timestamp.
> 
> Hariprasad Kelam (1):
>   octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon
> 
> Naveen Mamindlapalli (3):
>   octeontx2-af: return correct ptp timestamp for CN10K silicon
>   octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon
>   octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly

For the series:

Acked-by: Richard Cochran <richardcochran@gmail.com>

Re: [net-next PATCH 0/4] Add PTP support for CN10K silicon

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Sat, 10 Sep 2022 13:24:12 +0530 you wrote:
> This patchset adds PTP support for CN10K silicon, specifically
> to workaround few hardware issues and to add 1-step mode.
> 
> Patchset overview:
> 
> Patch #1 returns correct ptp timestamp in nanoseconds captured
>          when external timestamp event occurs.
> 
> [...]

Here is the summary with links:
  - [net-next,1/4] octeontx2-af: return correct ptp timestamp for CN10K silicon
    https://git.kernel.org/netdev/net-next/c/a8025e7946a2
  - [net-next,2/4] octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon
    https://git.kernel.org/netdev/net-next/c/2958d17a8984
  - [net-next,3/4] octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon
    https://git.kernel.org/netdev/net-next/c/2ef4e45d99b1
  - [net-next,4/4] octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly
    https://git.kernel.org/netdev/net-next/c/85a5f9638313

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [net-next PATCH 0/4] Add PTP support for CN10K silicon

[Naveen Mamindlapalli]

Hi Jakub,

> -----Original Message-----
> From: Jakub Kicinski <kuba@kernel.org>
> Sent: Saturday, July 30, 2022 8:56 AM
> To: Naveen Mamindlapalli <naveenm@marvell.com>
> Cc: davem@davemloft.net; edumazet@google.com; pabeni@redhat.com;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Sunil Kovvuri Goutham
> <sgoutham@marvell.com>
> Subject: Re: [net-next PATCH 0/4] Add PTP support for CN10K silicon
> 
> ----------------------------------------------------------------------
> On Thu, 28 Jul 2022 17:46:34 +0530 Naveen Mamindlapalli wrote:
> > This patchset adds PTP support for CN10K silicon, specifically to
> > workaround few hardware issues and to add 1-step mode.
> 
> You need to CC the PTP maintainer on ptp patches:
> 
> Richard Cochran <richardcochran@gmail.com>
> 
> please repost.

Sent v2 patch set including PTP maintainer in CC list.

Thanks,
Naveen 

Re: [net-next PATCH 0/4] Add PTP support for CN10K silicon

[Jakub Kicinski]

On Thu, 28 Jul 2022 17:46:34 +0530 Naveen Mamindlapalli wrote:
> This patchset adds PTP support for CN10K silicon, specifically
> to workaround few hardware issues and to add 1-step mode.

You need to CC the PTP maintainer on ptp patches:

Richard Cochran <richardcochran@gmail.com>

please repost.

[net-next PATCH 0/4] Add PTP support for CN10K silicon

[Naveen Mamindlapalli]

This patchset adds PTP support for CN10K silicon, specifically
to workaround few hardware issues and to add 1-step mode.

Patchset overview:

Patch #1 returns correct ptp timestamp in nanoseconds captured
         when external timestamp event occurs.

Patch #2 adds 1-step mode support.

Patch #3 implements software workaround to generate PPS output properly.

Patch #4 provides a software workaround for the rollover register default
         value, which causes ptp to return the wrong timestamp.

Hariprasad Kelam (1):
  octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon

Naveen Mamindlapalli (3):
  octeontx2-af: return correct ptp timestamp for CN10K silicon
  octeontx2-af: Add PTP PPS Errata workaround on CN10K silicon
  octeontx2-af: Initialize PTP_SEC_ROLLOVER register properly

 drivers/net/ethernet/marvell/octeontx2/af/mbox.h   |   2 +
 drivers/net/ethernet/marvell/octeontx2/af/ptp.c    | 106 +++++++++++++++++++-
 drivers/net/ethernet/marvell/octeontx2/af/ptp.h    |   3 +
 drivers/net/ethernet/marvell/octeontx2/af/rpm.c    |  19 +++-
 drivers/net/ethernet/marvell/octeontx2/af/rpm.h    |   5 +
 .../net/ethernet/marvell/octeontx2/af/rvu_nix.c    |   8 +-
 .../net/ethernet/marvell/octeontx2/af/rvu_reg.h    |   1 +
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  13 +++
 .../ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |   8 +-
 .../net/ethernet/marvell/octeontx2/nic/otx2_pf.c   |  11 +++
 .../net/ethernet/marvell/octeontx2/nic/otx2_ptp.c  | 103 ++++++++++++++-----
 .../ethernet/marvell/octeontx2/nic/otx2_struct.h   |  11 ++-
 .../net/ethernet/marvell/octeontx2/nic/otx2_txrx.c | 110 ++++++++++++++++++++-
 13 files changed, 359 insertions(+), 41 deletions(-)

-- 
2.16.5