[PATCH 5.15 00/37] 5.15.73-rc1 review

[PATCH 5.15 00/37] 5.15.73-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.15.73 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.73-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.15.73-rc1

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

Johan Hovold <johan@kernel.org>
    USB: serial: ftdi_sio: fix 300 bps rate for SIO

Tadeusz Struk <tadeusz.struk@linaro.org>
    usb: mon: make mmapped memory read only

Vlad Buslov <vladbu@nvidia.com>
    net/mlx5: Disable irq when locking lag_lock

Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
    wifi: cfg80211: fix MCS divisor value

Naoya Horiguchi <naoya.horiguchi@nec.com>
    mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()

Miaohe Lin <linmiaohe@huawei.com>
    mm/huge_memory: minor cleanup for split_huge_pages_all

Ian Rogers <irogers@google.com>
    perf parse-events: Identify broken modifiers

Brian Norris <briannorris@chromium.org>
    mmc: core: Terminate infinite loop in SD-UHS voltage switch

ChanWoo Lee <cw9316.lee@samsung.com>
    mmc: core: Replace with already defined values for readability

zhikzhai <zhikai.zhai@amd.com>
    drm/amd/display: skip audio setup when audio stream is enabled

Hugo Hu <hugo.hu@amd.com>
    drm/amd/display: update gamut remap if plane has changed

Michael Strauss <michael.strauss@amd.com>
    drm/amd/display: Assume an LTTPR is always present on fixed_vs links

Leo Li <sunpeng.li@amd.com>
    drm/amd/display: Fix double cursor on non-video RGB MPO

Jianglei Nie <niejianglei2021@163.com>
    net: atlantic: fix potential memory leak in aq_ndev_close()

David Gow <davidgow@google.com>
    arch: um: Mark the stack non-executable to fix a binutils warning

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup compiler warning in arch/x86/um/tls_32.c

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup syscall_handler_t cast in syscalls_32.h

Jaroslav Kysela <perex@perex.cz>
    ALSA: hda/hdmi: Fix the converter reuse for the silent stream

Oleksandr Mazur <oleksandr.mazur@plvision.eu>
    net: marvell: prestera: add support for for Aldrin2

Haimin Zhang <tcs.kernel@gmail.com>
    net/ieee802154: fix uninit value bug in dgram_sendmsg

Letu Ren <fantasquex@gmail.com>
    scsi: qedf: Fix a UAF bug in __qedf_probe()

Sergei Antonov <saproj@gmail.com>
    ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Add SCMI PM driver remove routine

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Harden accesses to the sensor domains

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Improve checks in the info_get operations

Dongliang Mu <mudongliangabcd@gmail.com>
    fs: fix UAF/GPF bug in nilfs_mdt_destroy

Mikulas Patocka <mpatocka@redhat.com>
    provide arch_test_bit_acquire for architectures that define test_bit

Mikulas Patocka <mpatocka@redhat.com>
    wait_on_bit: add an acquire memory barrier

Yang Shi <shy828301@gmail.com>
    powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush

Yang Shi <shy828301@gmail.com>
    mm: gup: fix the fast GUP race against THP collapse

Jalal Mostafa <jalal.a.mostapha@gmail.com>
    xsk: Inherit need_wakeup flag for shared sockets

Shuah Khan <skhan@linuxfoundation.org>
    docs: update mediator information in CoC docs

Sami Tolvanen <samitolvanen@google.com>
    Makefile.extrawarn: Move -Wcast-function-type-strict to W=1


-------------

Diffstat:

 .../devicetree/bindings/dma/moxa,moxart-dma.txt    |  4 +-
 .../process/code-of-conduct-interpretation.rst     |  2 +-
 Makefile                                           |  4 +-
 arch/alpha/include/asm/bitops.h                    |  7 +++
 arch/arm/boot/dts/moxart-uc7112lx.dts              |  2 +-
 arch/arm/boot/dts/moxart.dtsi                      |  4 +-
 arch/hexagon/include/asm/bitops.h                  | 15 ++++++
 arch/ia64/include/asm/bitops.h                     |  7 +++
 arch/m68k/include/asm/bitops.h                     |  6 +++
 arch/powerpc/mm/book3s64/radix_pgtable.c           |  9 ----
 arch/s390/include/asm/bitops.h                     |  7 +++
 arch/sh/include/asm/bitops-op32.h                  |  7 +++
 arch/um/Makefile                                   |  8 ++++
 arch/x86/include/asm/bitops.h                      | 21 +++++++++
 arch/x86/um/shared/sysdep/syscalls_32.h            |  5 +-
 arch/x86/um/tls_32.c                               |  6 ---
 arch/x86/um/vdso/Makefile                          |  2 +-
 drivers/dma/xilinx/xilinx_dma.c                    | 21 +++++----
 drivers/firmware/arm_scmi/clock.c                  |  6 ++-
 drivers/firmware/arm_scmi/scmi_pm_domain.c         | 20 ++++++++
 drivers/firmware/arm_scmi/sensors.c                | 25 ++++++++--
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  | 12 ++++-
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c   |  8 ++++
 .../amd/display/dc/dce110/dce110_hw_sequencer.c    |  6 ++-
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c |  1 +
 drivers/mmc/core/sd.c                              |  3 +-
 drivers/net/ethernet/aquantia/atlantic/aq_main.c   |  3 --
 .../net/ethernet/marvell/prestera/prestera_pci.c   |  1 +
 drivers/net/ethernet/mellanox/mlx5/core/lag.c      | 55 +++++++++++++---------
 drivers/rpmsg/qcom_glink_native.c                  |  2 +-
 drivers/rpmsg/qcom_smd.c                           |  4 +-
 drivers/scsi/qedf/qedf_main.c                      |  5 --
 drivers/usb/mon/mon_bin.c                          |  5 ++
 drivers/usb/serial/ftdi_sio.c                      |  3 +-
 fs/inode.c                                         |  7 ++-
 .../asm-generic/bitops/instrumented-non-atomic.h   | 12 +++++
 include/asm-generic/bitops/non-atomic.h            | 14 ++++++
 include/linux/buffer_head.h                        |  2 +-
 include/linux/scmi_protocol.h                      |  4 +-
 include/linux/wait_bit.h                           |  8 ++--
 include/net/ieee802154_netdev.h                    | 37 +++++++++++++++
 include/net/xsk_buff_pool.h                        |  2 +-
 kernel/sched/wait_bit.c                            |  2 +-
 mm/gup.c                                           | 34 ++++++++++---
 mm/huge_memory.c                                   | 13 +++--
 mm/khugepaged.c                                    | 10 ++--
 net/ieee802154/socket.c                            | 42 +++++++++--------
 net/wireless/util.c                                |  2 +-
 net/xdp/xsk.c                                      |  4 +-
 net/xdp/xsk_buff_pool.c                            |  5 +-
 scripts/Makefile.extrawarn                         |  1 +
 sound/pci/hda/patch_hdmi.c                         |  1 +
 tools/perf/util/parse-events.y                     | 10 ++++
 53 files changed, 374 insertions(+), 132 deletions(-)

[PATCH 5.15 01/37] Makefile.extrawarn: Move -Wcast-function-type-strict to W=1

[Greg Kroah-Hartman]

From: Sami Tolvanen <samitolvanen@google.com>

commit 2120635108b35ecad9c59c8b44f6cbdf4f98214e upstream.

We enable -Wcast-function-type globally in the kernel to warn about
mismatching types in function pointer casts. Compilers currently
warn only about ABI incompability with this flag, but Clang 16 will
enable a stricter version of the check by default that checks for an
exact type match. This will be very noisy in the kernel, so disable
-Wcast-function-type-strict without W=1 until the new warnings have
been addressed.

Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D134831
Link: https://github.com/ClangBuiltLinux/linux/issues/1724
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220930203310.4010564-1-samitolvanen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 scripts/Makefile.extrawarn |    1 +
 1 file changed, 1 insertion(+)

--- a/scripts/Makefile.extrawarn
+++ b/scripts/Makefile.extrawarn
@@ -52,6 +52,7 @@ KBUILD_CFLAGS += -Wno-format-zero-length
 KBUILD_CFLAGS += $(call cc-disable-warning, pointer-to-enum-cast)
 KBUILD_CFLAGS += -Wno-tautological-constant-out-of-range-compare
 KBUILD_CFLAGS += $(call cc-disable-warning, unaligned-access)
+KBUILD_CFLAGS += $(call cc-disable-warning, cast-function-type-strict)
 endif
 
 endif

[PATCH 5.15 02/37] docs: update mediator information in CoC docs

[Greg Kroah-Hartman]

From: Shuah Khan <skhan@linuxfoundation.org>

commit 8bfdfa0d6b929ede7b6189e0e546ceb6a124d05d upstream.

Update mediator information in the CoC interpretation document.

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220901212319.56644-1-skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 Documentation/process/code-of-conduct-interpretation.rst |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/process/code-of-conduct-interpretation.rst
+++ b/Documentation/process/code-of-conduct-interpretation.rst
@@ -51,7 +51,7 @@ the Technical Advisory Board (TAB) or ot
 uncertain how to handle situations that come up.  It will not be
 considered a violation report unless you want it to be.  If you are
 uncertain about approaching the TAB or any other maintainers, please
-reach out to our conflict mediator, Mishi Choudhary <mishi@linux.com>.
+reach out to our conflict mediator, Joanna Lee <joanna.lee@gesmer.com>.
 
 In the end, "be kind to each other" is really what the end goal is for
 everybody.  We know everyone is human and we all fail at times, but the

[PATCH 5.15 03/37] xsk: Inherit need_wakeup flag for shared sockets

[Greg Kroah-Hartman]

From: Jalal Mostafa <jalal.a.mostapha@gmail.com>

commit 60240bc26114543fcbfcd8a28466e67e77b20388 upstream.

The flag for need_wakeup is not set for xsks with `XDP_SHARED_UMEM`
flag and of different queue ids and/or devices. They should inherit
the flag from the first socket buffer pool since no flags can be
specified once `XDP_SHARED_UMEM` is specified.

Fixes: b5aea28dca134 ("xsk: Add shared umem support between queue ids")
Signed-off-by: Jalal Mostafa <jalal.a.mostapha@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220921135701.10199-1-jalal.a.mostapha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/xsk_buff_pool.h |    2 +-
 net/xdp/xsk.c               |    4 ++--
 net/xdp/xsk_buff_pool.c     |    5 +++--
 3 files changed, 6 insertions(+), 5 deletions(-)

--- a/include/net/xsk_buff_pool.h
+++ b/include/net/xsk_buff_pool.h
@@ -87,7 +87,7 @@ struct xsk_buff_pool *xp_create_and_assi
 						struct xdp_umem *umem);
 int xp_assign_dev(struct xsk_buff_pool *pool, struct net_device *dev,
 		  u16 queue_id, u16 flags);
-int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem,
+int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs,
 			 struct net_device *dev, u16 queue_id);
 int xp_alloc_tx_descs(struct xsk_buff_pool *pool, struct xdp_sock *xs);
 void xp_destroy(struct xsk_buff_pool *pool);
--- a/net/xdp/xsk.c
+++ b/net/xdp/xsk.c
@@ -968,8 +968,8 @@ static int xsk_bind(struct socket *sock,
 				goto out_unlock;
 			}
 
-			err = xp_assign_dev_shared(xs->pool, umem_xs->umem,
-						   dev, qid);
+			err = xp_assign_dev_shared(xs->pool, umem_xs, dev,
+						   qid);
 			if (err) {
 				xp_destroy(xs->pool);
 				xs->pool = NULL;
--- a/net/xdp/xsk_buff_pool.c
+++ b/net/xdp/xsk_buff_pool.c
@@ -206,17 +206,18 @@ err_unreg_pool:
 	return err;
 }
 
-int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_umem *umem,
+int xp_assign_dev_shared(struct xsk_buff_pool *pool, struct xdp_sock *umem_xs,
 			 struct net_device *dev, u16 queue_id)
 {
 	u16 flags;
+	struct xdp_umem *umem = umem_xs->umem;
 
 	/* One fill and completion ring required for each queue id. */
 	if (!pool->fq || !pool->cq)
 		return -EINVAL;
 
 	flags = umem->zc ? XDP_ZEROCOPY : XDP_COPY;
-	if (pool->uses_need_wakeup)
+	if (umem_xs->pool->uses_need_wakeup)
 		flags |= XDP_USE_NEED_WAKEUP;
 
 	return xp_assign_dev(pool, dev, queue_id, flags);

[PATCH 5.15 04/37] mm: gup: fix the fast GUP race against THP collapse

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit 70cbc3cc78a997d8247b50389d37c4e1736019da upstream.

Since general RCU GUP fast was introduced in commit 2667f50e8b81 ("mm:
introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer
sufficient to handle concurrent GUP-fast in all cases, it only handles
traditional IPI-based GUP-fast correctly.  On architectures that send an
IPI broadcast on TLB flush, it works as expected.  But on the
architectures that do not use IPI to broadcast TLB flush, it may have the
below race:

   CPU A                                          CPU B
THP collapse                                     fast GUP
                                              gup_pmd_range() <-- see valid pmd
                                                  gup_pte_range() <-- work on pte
pmdp_collapse_flush() <-- clear pmd and flush
__collapse_huge_page_isolate()
    check page pinned <-- before GUP bump refcount
                                                      pin the page
                                                      check PTE <-- no change
__collapse_huge_page_copy()
    copy data to huge page
    ptep_clear()
install huge pmd for the huge page
                                                      return the stale page
discard the stale page

The race can be fixed by checking whether PMD is changed or not after
taking the page pin in fast GUP, just like what it does for PTE.  If the
PMD is changed it means there may be parallel THP collapse, so GUP should
back off.

Also update the stale comment about serializing against fast GUP in
khugepaged.

Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com
Fixes: 2667f50e8b81 ("mm: introduce a general RCU get_user_pages_fast()")
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/gup.c        |   34 ++++++++++++++++++++++++++++------
 mm/khugepaged.c |   10 ++++++----
 2 files changed, 34 insertions(+), 10 deletions(-)

--- a/mm/gup.c
+++ b/mm/gup.c
@@ -2266,8 +2266,28 @@ static void __maybe_unused undo_dev_page
 }
 
 #ifdef CONFIG_ARCH_HAS_PTE_SPECIAL
-static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end,
-			 unsigned int flags, struct page **pages, int *nr)
+/*
+ * Fast-gup relies on pte change detection to avoid concurrent pgtable
+ * operations.
+ *
+ * To pin the page, fast-gup needs to do below in order:
+ * (1) pin the page (by prefetching pte), then (2) check pte not changed.
+ *
+ * For the rest of pgtable operations where pgtable updates can be racy
+ * with fast-gup, we need to do (1) clear pte, then (2) check whether page
+ * is pinned.
+ *
+ * Above will work for all pte-level operations, including THP split.
+ *
+ * For THP collapse, it's a bit more complicated because fast-gup may be
+ * walking a pgtable page that is being freed (pte is still valid but pmd
+ * can be cleared already).  To avoid race in such condition, we need to
+ * also check pmd here to make sure pmd doesn't change (corresponds to
+ * pmdp_collapse_flush() in the THP collapse code path).
+ */
+static int gup_pte_range(pmd_t pmd, pmd_t *pmdp, unsigned long addr,
+			 unsigned long end, unsigned int flags,
+			 struct page **pages, int *nr)
 {
 	struct dev_pagemap *pgmap = NULL;
 	int nr_start = *nr, ret = 0;
@@ -2312,7 +2332,8 @@ static int gup_pte_range(pmd_t pmd, unsi
 			goto pte_unmap;
 		}
 
-		if (unlikely(pte_val(pte) != pte_val(*ptep))) {
+		if (unlikely(pmd_val(pmd) != pmd_val(*pmdp)) ||
+		    unlikely(pte_val(pte) != pte_val(*ptep))) {
 			put_compound_head(head, 1, flags);
 			goto pte_unmap;
 		}
@@ -2357,8 +2378,9 @@ pte_unmap:
  * get_user_pages_fast_only implementation that can pin pages. Thus it's still
  * useful to have gup_huge_pmd even if we can't operate on ptes.
  */
-static int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end,
-			 unsigned int flags, struct page **pages, int *nr)
+static int gup_pte_range(pmd_t pmd, pmd_t *pmdp, unsigned long addr,
+			 unsigned long end, unsigned int flags,
+			 struct page **pages, int *nr)
 {
 	return 0;
 }
@@ -2667,7 +2689,7 @@ static int gup_pmd_range(pud_t *pudp, pu
 			if (!gup_huge_pd(__hugepd(pmd_val(pmd)), addr,
 					 PMD_SHIFT, next, flags, pages, nr))
 				return 0;
-		} else if (!gup_pte_range(pmd, addr, next, flags, pages, nr))
+		} else if (!gup_pte_range(pmd, pmdp, addr, next, flags, pages, nr))
 			return 0;
 	} while (pmdp++, addr = next, addr != end);
 
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1146,10 +1146,12 @@ static void collapse_huge_page(struct mm
 
 	pmd_ptl = pmd_lock(mm, pmd); /* probably unnecessary */
 	/*
-	 * After this gup_fast can't run anymore. This also removes
-	 * any huge TLB entry from the CPU so we won't allow
-	 * huge and small TLB entries for the same virtual address
-	 * to avoid the risk of CPU bugs in that area.
+	 * This removes any huge TLB entry from the CPU so we won't allow
+	 * huge and small TLB entries for the same virtual address to
+	 * avoid the risk of CPU bugs in that area.
+	 *
+	 * Parallel fast GUP is fine since fast GUP will back off when
+	 * it detects PMD is changed.
 	 */
 	_pmd = pmdp_collapse_flush(vma, address, pmd);
 	spin_unlock(pmd_ptl);

[PATCH 5.15 05/37] powerpc/64s/radix: dont need to broadcast IPI for radix pmd collapse flush

[Greg Kroah-Hartman]

From: Yang Shi <shy828301@gmail.com>

commit bedf03416913d88c796288f9dca109a53608c745 upstream.

The IPI broadcast is used to serialize against fast-GUP, but fast-GUP will
move to use RCU instead of disabling local interrupts in fast-GUP.  Using
an IPI is the old-styled way of serializing against fast-GUP although it
still works as expected now.

And fast-GUP now fixed the potential race with THP collapse by checking
whether PMD is changed or not.  So IPI broadcast in radix pmd collapse
flush is not necessary anymore.  But it is still needed for hash TLB.

Link: https://lkml.kernel.org/r/20220907180144.555485-2-shy828301@gmail.com
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/mm/book3s64/radix_pgtable.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/arch/powerpc/mm/book3s64/radix_pgtable.c
+++ b/arch/powerpc/mm/book3s64/radix_pgtable.c
@@ -954,15 +954,6 @@ pmd_t radix__pmdp_collapse_flush(struct
 	pmd = *pmdp;
 	pmd_clear(pmdp);
 
-	/*
-	 * pmdp collapse_flush need to ensure that there are no parallel gup
-	 * walk after this call. This is needed so that we can have stable
-	 * page ref count when collapsing a page. We don't allow a collapse page
-	 * if we have gup taken on the page. We can ensure that by sending IPI
-	 * because gup walk happens with IRQ disabled.
-	 */
-	serialize_against_pte_lookup(vma->vm_mm);
-
 	radix__flush_tlb_collapsed_pmd(vma->vm_mm, address);
 
 	return pmd;

[PATCH 5.15 06/37] wait_on_bit: add an acquire memory barrier

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit 8238b4579866b7c1bb99883cfe102a43db5506ff upstream.

There are several places in the kernel where wait_on_bit is not followed
by a memory barrier (for example, in drivers/md/dm-bufio.c:new_read).

On architectures with weak memory ordering, it may happen that memory
accesses that follow wait_on_bit are reordered before wait_on_bit and
they may return invalid data.

Fix this class of bugs by introducing a new function "test_bit_acquire"
that works like test_bit, but has acquire memory ordering semantics.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/include/asm/bitops.h                        |   21 +++++++++++++++++++
 include/asm-generic/bitops/instrumented-non-atomic.h |   12 ++++++++++
 include/asm-generic/bitops/non-atomic.h              |   14 ++++++++++++
 include/linux/buffer_head.h                          |    2 -
 include/linux/wait_bit.h                             |    8 +++----
 kernel/sched/wait_bit.c                              |    2 -
 6 files changed, 53 insertions(+), 6 deletions(-)

--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -207,6 +207,20 @@ static __always_inline bool constant_tes
 		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
 
+static __always_inline bool constant_test_bit_acquire(long nr, const volatile unsigned long *addr)
+{
+	bool oldbit;
+
+	asm volatile("testb %2,%1"
+		     CC_SET(nz)
+		     : CC_OUT(nz) (oldbit)
+		     : "m" (((unsigned char *)addr)[nr >> 3]),
+		       "i" (1 << (nr & 7))
+		     :"memory");
+
+	return oldbit;
+}
+
 static __always_inline bool variable_test_bit(long nr, volatile const unsigned long *addr)
 {
 	bool oldbit;
@@ -224,6 +238,13 @@ static __always_inline bool variable_tes
 	 ? constant_test_bit((nr), (addr))	\
 	 : variable_test_bit((nr), (addr)))
 
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	return __builtin_constant_p(nr) ? constant_test_bit_acquire(nr, addr) :
+					  variable_test_bit(nr, addr);
+}
+
 /**
  * __ffs - find first set bit in word
  * @word: The word to search
--- a/include/asm-generic/bitops/instrumented-non-atomic.h
+++ b/include/asm-generic/bitops/instrumented-non-atomic.h
@@ -135,4 +135,16 @@ static inline bool test_bit(long nr, con
 	return arch_test_bit(nr, addr);
 }
 
+/**
+ * _test_bit_acquire - Determine, with acquire semantics, whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	instrument_atomic_read(addr + BIT_WORD(nr), sizeof(long));
+	return arch_test_bit_acquire(nr, addr);
+}
+
 #endif /* _ASM_GENERIC_BITOPS_INSTRUMENTED_NON_ATOMIC_H */
--- a/include/asm-generic/bitops/non-atomic.h
+++ b/include/asm-generic/bitops/non-atomic.h
@@ -3,6 +3,7 @@
 #define _ASM_GENERIC_BITOPS_NON_ATOMIC_H_
 
 #include <asm/types.h>
+#include <asm/barrier.h>
 
 /**
  * arch___set_bit - Set a bit in memory
@@ -119,4 +120,17 @@ arch_test_bit(unsigned int nr, const vol
 }
 #define test_bit arch_test_bit
 
+/**
+ * arch_test_bit_acquire - Determine, with acquire semantics, whether a bit is set
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+#define test_bit_acquire arch_test_bit_acquire
+
 #endif /* _ASM_GENERIC_BITOPS_NON_ATOMIC_H_ */
--- a/include/linux/buffer_head.h
+++ b/include/linux/buffer_head.h
@@ -166,7 +166,7 @@ static __always_inline int buffer_uptoda
 	 * make it consistent with folio_test_uptodate
 	 * pairs with smp_mb__before_atomic in set_buffer_uptodate
 	 */
-	return (smp_load_acquire(&bh->b_state) & (1UL << BH_Uptodate)) != 0;
+	return test_bit_acquire(BH_Uptodate, &bh->b_state);
 }
 
 #define bh_offset(bh)		((unsigned long)(bh)->b_data & ~PAGE_MASK)
--- a/include/linux/wait_bit.h
+++ b/include/linux/wait_bit.h
@@ -71,7 +71,7 @@ static inline int
 wait_on_bit(unsigned long *word, int bit, unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit,
 				       bit_wait,
@@ -96,7 +96,7 @@ static inline int
 wait_on_bit_io(unsigned long *word, int bit, unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit,
 				       bit_wait_io,
@@ -123,7 +123,7 @@ wait_on_bit_timeout(unsigned long *word,
 		    unsigned long timeout)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit_timeout(word, bit,
 					       bit_wait_timeout,
@@ -151,7 +151,7 @@ wait_on_bit_action(unsigned long *word,
 		   unsigned mode)
 {
 	might_sleep();
-	if (!test_bit(bit, word))
+	if (!test_bit_acquire(bit, word))
 		return 0;
 	return out_of_line_wait_on_bit(word, bit, action, mode);
 }
--- a/kernel/sched/wait_bit.c
+++ b/kernel/sched/wait_bit.c
@@ -47,7 +47,7 @@ __wait_on_bit(struct wait_queue_head *wq
 		prepare_to_wait(wq_head, &wbq_entry->wq_entry, mode);
 		if (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags))
 			ret = (*action)(&wbq_entry->key, mode);
-	} while (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags) && !ret);
+	} while (test_bit_acquire(wbq_entry->key.bit_nr, wbq_entry->key.flags) && !ret);
 
 	finish_wait(wq_head, &wbq_entry->wq_entry);
 

[PATCH 5.15 07/37] provide arch_test_bit_acquire for architectures that define test_bit

[Greg Kroah-Hartman]

From: Mikulas Patocka <mpatocka@redhat.com>

commit d6ffe6067a54972564552ea45d320fb98db1ac5e upstream.

Some architectures define their own arch_test_bit and they also need
arch_test_bit_acquire, otherwise they won't compile.  We also clean up
the code by using the generic test_bit if that is equivalent to the
arch-specific version.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8238b4579866 ("wait_on_bit: add an acquire memory barrier")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/alpha/include/asm/bitops.h   |    7 +++++++
 arch/hexagon/include/asm/bitops.h |   15 +++++++++++++++
 arch/ia64/include/asm/bitops.h    |    7 +++++++
 arch/m68k/include/asm/bitops.h    |    6 ++++++
 arch/s390/include/asm/bitops.h    |    7 +++++++
 arch/sh/include/asm/bitops-op32.h |    7 +++++++
 6 files changed, 49 insertions(+)

--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -289,6 +289,13 @@ test_bit(int nr, const volatile void * a
 	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 /*
  * ffz = Find First Zero in word. Undefined if no zero exists,
  * so code should check against ~0UL first..
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@@ -172,7 +172,22 @@ static inline int __test_bit(int nr, con
 	return retval;
 }
 
+static inline int __test_bit_acquire(int nr, const volatile unsigned long *addr)
+{
+	int retval;
+
+	asm volatile(
+	"{P0 = tstbit(%1,%2); if (P0.new) %0 = #1; if (!P0.new) %0 = #0;}\n"
+	: "=&r" (retval)
+	: "r" (addr[BIT_WORD(nr)]), "r" (nr % BITS_PER_LONG)
+	: "p0", "memory"
+	);
+
+	return retval;
+}
+
 #define test_bit(nr, addr) __test_bit(nr, addr)
+#define test_bit_acquire(nr, addr) __test_bit_acquire(nr, addr)
 
 /*
  * ffz - find first zero in word.
--- a/arch/ia64/include/asm/bitops.h
+++ b/arch/ia64/include/asm/bitops.h
@@ -337,6 +337,13 @@ test_bit (int nr, const volatile void *a
 	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 /**
  * ffz - find the first zero bit in a long word
  * @x: The long word to find the bit in
--- a/arch/m68k/include/asm/bitops.h
+++ b/arch/m68k/include/asm/bitops.h
@@ -153,6 +153,12 @@ static inline int test_bit(int nr, const
 	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
 
 static inline int bset_reg_test_and_set_bit(int nr,
 					    volatile unsigned long *vaddr)
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -184,6 +184,13 @@ static inline bool arch_test_bit(unsigne
 	return *addr & mask;
 }
 
+static __always_inline bool
+arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 static inline bool arch_test_and_set_bit_lock(unsigned long nr,
 					      volatile unsigned long *ptr)
 {
--- a/arch/sh/include/asm/bitops-op32.h
+++ b/arch/sh/include/asm/bitops-op32.h
@@ -138,4 +138,11 @@ static inline int test_bit(int nr, const
 	return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
 }
 
+static __always_inline bool
+test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+	return 1UL & (smp_load_acquire(p) >> (nr & (BITS_PER_LONG-1)));
+}
+
 #endif /* __ASM_SH_BITOPS_OP32_H */

[PATCH 5.15 08/37] fs: fix UAF/GPF bug in nilfs_mdt_destroy

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

commit 2e488f13755ffbb60f307e991b27024716a33b29 upstream.

In alloc_inode, inode_init_always() could return -ENOMEM if
security_inode_alloc() fails, which causes inode->i_private
uninitialized. Then nilfs_is_metadata_file_inode() returns
true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(),
which frees the uninitialized inode->i_private
and leads to crashes(e.g., UAF/GPF).

Fix this by moving security_inode_alloc just prior to
this_cpu_inc(nr_inodes)

Link: https://lkml.kernel.org/r/CAFcO6XOcf1Jj2SeGt=jJV59wmhESeSKpfR0omdFRq+J9nD1vfQ@mail.gmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/inode.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/fs/inode.c
+++ b/fs/inode.c
@@ -167,8 +167,6 @@ int inode_init_always(struct super_block
 	inode->i_wb_frn_history = 0;
 #endif
 
-	if (security_inode_alloc(inode))
-		goto out;
 	spin_lock_init(&inode->i_lock);
 	lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key);
 
@@ -205,11 +203,12 @@ int inode_init_always(struct super_block
 	inode->i_fsnotify_mask = 0;
 #endif
 	inode->i_flctx = NULL;
+
+	if (unlikely(security_inode_alloc(inode)))
+		return -ENOMEM;
 	this_cpu_inc(nr_inodes);
 
 	return 0;
-out:
-	return -ENOMEM;
 }
 EXPORT_SYMBOL(inode_init_always);
 

[PATCH 5.15 09/37] firmware: arm_scmi: Improve checks in the info_get operations

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 1ecb7d27b1af6705e9a4e94415b4d8cc8cf2fbfb ]

SCMI protocols abstract and expose a number of protocol specific
resources like clocks, sensors and so on. Information about such
specific domain resources are generally exposed via an `info_get`
protocol operation.

Improve the sanity check on these operations where needed.

Link: https://lore.kernel.org/r/20220817172731.1185305-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/clock.c   | 6 +++++-
 drivers/firmware/arm_scmi/sensors.c | 3 +++
 include/linux/scmi_protocol.h       | 4 ++--
 3 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index 492f3a9197ec..e76194a60edf 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -315,9 +315,13 @@ static int scmi_clock_count_get(const struct scmi_protocol_handle *ph)
 static const struct scmi_clock_info *
 scmi_clock_info_get(const struct scmi_protocol_handle *ph, u32 clk_id)
 {
+	struct scmi_clock_info *clk;
 	struct clock_info *ci = ph->get_priv(ph);
-	struct scmi_clock_info *clk = ci->clk + clk_id;
 
+	if (clk_id >= ci->num_clocks)
+		return NULL;
+
+	clk = ci->clk + clk_id;
 	if (!clk->name[0])
 		return NULL;
 
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index cdbb287bd8bc..b479a9e29c96 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -817,6 +817,9 @@ scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id)
 {
 	struct sensors_info *si = ph->get_priv(ph);
 
+	if (sensor_id >= si->num_sensors)
+		return NULL;
+
 	return si->sensors + sensor_id;
 }
 
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h
index 80e781c51ddc..d22f62203ee3 100644
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@@ -74,7 +74,7 @@ struct scmi_protocol_handle;
 struct scmi_clk_proto_ops {
 	int (*count_get)(const struct scmi_protocol_handle *ph);
 
-	const struct scmi_clock_info *(*info_get)
+	const struct scmi_clock_info __must_check *(*info_get)
 		(const struct scmi_protocol_handle *ph, u32 clk_id);
 	int (*rate_get)(const struct scmi_protocol_handle *ph, u32 clk_id,
 			u64 *rate);
@@ -452,7 +452,7 @@ enum scmi_sensor_class {
  */
 struct scmi_sensor_proto_ops {
 	int (*count_get)(const struct scmi_protocol_handle *ph);
-	const struct scmi_sensor_info *(*info_get)
+	const struct scmi_sensor_info __must_check *(*info_get)
 		(const struct scmi_protocol_handle *ph, u32 sensor_id);
 	int (*trip_point_config)(const struct scmi_protocol_handle *ph,
 				 u32 sensor_id, u8 trip_id, u64 trip_value);
-- 
2.35.1

[PATCH 5.15 10/37] firmware: arm_scmi: Harden accesses to the sensor domains

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit 76f89c954788763db575fb512a40bd483864f1e9 ]

Accessing sensor domains descriptors by the index upon the SCMI drivers
requests through the SCMI sensor operations interface can potentially
lead to out-of-bound violations if the SCMI driver misbehave.

Add an internal consistency check before any such domains descriptors
accesses.

Link: https://lore.kernel.org/r/20220817172731.1185305-4-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/sensors.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index b479a9e29c96..1ed66d13c06c 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -631,6 +631,10 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	struct scmi_xfer *t;
+	struct sensors_info *si = ph->get_priv(ph);
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET,
 				      sizeof(__le32), sizeof(__le32), &t);
@@ -640,7 +644,6 @@ static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
 	put_unaligned_le32(sensor_id, t->tx.buf);
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
-		struct sensors_info *si = ph->get_priv(ph);
 		struct scmi_sensor_info *s = si->sensors + sensor_id;
 
 		*sensor_config = get_unaligned_le64(t->rx.buf);
@@ -657,6 +660,10 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_config_set *msg;
+	struct sensors_info *si = ph->get_priv(ph);
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET,
 				      sizeof(*msg), 0, &t);
@@ -669,7 +676,6 @@ static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
 
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
-		struct sensors_info *si = ph->get_priv(ph);
 		struct scmi_sensor_info *s = si->sensors + sensor_id;
 
 		s->sensor_config = sensor_config;
@@ -700,8 +706,11 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_reading_get *sensor;
+	struct scmi_sensor_info *s;
 	struct sensors_info *si = ph->get_priv(ph);
-	struct scmi_sensor_info *s = si->sensors + sensor_id;
+
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
 
 	ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
 				      sizeof(*sensor), 0, &t);
@@ -710,6 +719,7 @@ static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
 
 	sensor = t->tx.buf;
 	sensor->id = cpu_to_le32(sensor_id);
+	s = si->sensors + sensor_id;
 	if (s->async) {
 		sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
 		ret = ph->xops->do_xfer_with_response(ph, t);
@@ -764,9 +774,13 @@ scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph,
 	int ret;
 	struct scmi_xfer *t;
 	struct scmi_msg_sensor_reading_get *sensor;
+	struct scmi_sensor_info *s;
 	struct sensors_info *si = ph->get_priv(ph);
-	struct scmi_sensor_info *s = si->sensors + sensor_id;
 
+	if (sensor_id >= si->num_sensors)
+		return -EINVAL;
+
+	s = si->sensors + sensor_id;
 	if (!count || !readings ||
 	    (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
 		return -EINVAL;
-- 
2.35.1

[PATCH 5.15 11/37] firmware: arm_scmi: Add SCMI PM driver remove routine

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.

Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/scmi_pm_domain.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index d5dee625de78..0e05a79de82d 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -112,9 +112,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;
 
+	dev_set_drvdata(dev, scmi_pd_data);
+
 	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }
 
+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
 static const struct scmi_device_id scmi_id_table[] = {
 	{ SCMI_PROTOCOL_POWER, "genpd" },
 	{ },
@@ -124,6 +143,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
 static struct scmi_driver scmi_power_domain_driver = {
 	.name = "scmi-power-domain",
 	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
 	.id_table = scmi_id_table,
 };
 module_scmi_driver(scmi_power_domain_driver);
-- 
2.35.1

[PATCH 5.15 12/37] dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 91df7751eb890e970afc08f50b8f0fa5ea39e03d ]

Add missing cleanup in devm_platform_ioremap_resource().
When probe fails remove dma channel resources and disable clocks in
accordance with the order of resources allocated .

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-2-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index a4450bc95466..d3556b00a672 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3037,9 +3037,10 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	/* Request and map I/O memory */
 	xdev->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(xdev->regs))
-		return PTR_ERR(xdev->regs);
-
+	if (IS_ERR(xdev->regs)) {
+		err = PTR_ERR(xdev->regs);
+		goto disable_clks;
+	}
 	/* Retrieve the DMA engine properties from the device tree */
 	xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
 	xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
@@ -3134,7 +3135,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	for_each_child_of_node(node, child) {
 		err = xilinx_dma_child_probe(xdev, child);
 		if (err < 0)
-			goto disable_clks;
+			goto error;
 	}
 
 	if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
@@ -3169,12 +3170,12 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 
 	return 0;
 
-disable_clks:
-	xdma_disable_allclks(xdev);
 error:
 	for (i = 0; i < xdev->dma_config->max_channels; i++)
 		if (xdev->chan[i])
 			xilinx_dma_chan_remove(xdev->chan[i]);
+disable_clks:
+	xdma_disable_allclks(xdev);
 
 	return err;
 }
-- 
2.35.1

[PATCH 5.15 13/37] dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index d3556b00a672..cc7d54f19fb8 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3068,7 +3068,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		if (err < 0) {
 			dev_err(xdev->dev,
 				"missing xlnx,num-fstores property\n");
-			return err;
+			goto disable_clks;
 		}
 
 		err = of_property_read_u32(node, "xlnx,flush-fsync",
-- 
2.35.1

[PATCH 5.15 14/37] dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index cc7d54f19fb8..4273150b68dc 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -3088,7 +3088,11 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	if (err < 0) {
+		dev_err(xdev->dev, "DMA mask error %d\n", err);
+		goto disable_clks;
+	}
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
-- 
2.35.1

[PATCH 5.15 15/37] ARM: dts: fix Moxa SDIO compatible, remove sdhci misnomer

[Greg Kroah-Hartman]

From: Sergei Antonov <saproj@gmail.com>

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt | 4 ++--
 arch/arm/boot/dts/moxart-uc7112lx.dts                     | 2 +-
 arch/arm/boot/dts/moxart.dtsi                             | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@ &clk_pll {
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@ watchdog: watchdog@98500000 {
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
-- 
2.35.1

[PATCH 5.15 16/37] scsi: qedf: Fix a UAF bug in __qedf_probe()

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0

Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index 544401f76c07..73c7197081ea 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -3686,11 +3686,6 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 err1:
 	scsi_host_put(lport->host);
 err0:
-	if (qedf) {
-		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
-
-		clear_bit(QEDF_PROBING, &qedf->flags);
-	}
 	return rc;
 }
 
-- 
2.35.1

[PATCH 5.15 17/37] net/ieee802154: fix uninit value bug in dgram_sendmsg

[Greg Kroah-Hartman]

From: Haimin Zhang <tcs.kernel@gmail.com>

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ieee802154_netdev.h | 37 +++++++++++++++++++++++++++++
 net/ieee802154/socket.c         | 42 ++++++++++++++++++---------------
 2 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
index d0d188c3294b..a8994f307fc3 100644
--- a/include/net/ieee802154_netdev.h
+++ b/include/net/ieee802154_netdev.h
@@ -15,6 +15,22 @@
 #ifndef IEEE802154_NETDEVICE_H
 #define IEEE802154_NETDEVICE_H
 
+#define IEEE802154_REQUIRED_SIZE(struct_type, member) \
+	(offsetof(typeof(struct_type), member) + \
+	sizeof(((typeof(struct_type) *)(NULL))->member))
+
+#define IEEE802154_ADDR_OFFSET \
+	offsetof(typeof(struct sockaddr_ieee802154), addr)
+
+#define IEEE802154_MIN_NAMELEN (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, addr_type))
+
+#define IEEE802154_NAMELEN_SHORT (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, short_addr))
+
+#define IEEE802154_NAMELEN_LONG (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, hwaddr))
+
 #include <net/af_ieee802154.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -165,6 +181,27 @@ static inline void ieee802154_devaddr_to_raw(void *raw, __le64 addr)
 	memcpy(raw, &temp, IEEE802154_ADDR_LEN);
 }
 
+static inline int
+ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len)
+{
+	struct ieee802154_addr_sa *sa;
+
+	sa = &daddr->addr;
+	if (len < IEEE802154_MIN_NAMELEN)
+		return -EINVAL;
+	switch (sa->addr_type) {
+	case IEEE802154_ADDR_SHORT:
+		if (len < IEEE802154_NAMELEN_SHORT)
+			return -EINVAL;
+		break;
+	case IEEE802154_ADDR_LONG:
+		if (len < IEEE802154_NAMELEN_LONG)
+			return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
 static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a,
 					   const struct ieee802154_addr_sa *sa)
 {
diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c
index 7bb9ef35c570..fd5862f9e26a 100644
--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -200,8 +200,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *_uaddr, int len)
 	int err = 0;
 	struct net_device *dev = NULL;
 
-	if (len < sizeof(*uaddr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(uaddr, len);
+	if (err < 0)
+		return err;
 
 	uaddr = (struct sockaddr_ieee802154 *)_uaddr;
 	if (uaddr->family != AF_IEEE802154)
@@ -493,7 +494,8 @@ static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len)
 
 	ro->bound = 0;
 
-	if (len < sizeof(*addr))
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
 		goto out;
 
 	if (addr->family != AF_IEEE802154)
@@ -564,8 +566,9 @@ static int dgram_connect(struct sock *sk, struct sockaddr *uaddr,
 	struct dgram_sock *ro = dgram_sk(sk);
 	int err = 0;
 
-	if (len < sizeof(*addr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
+		return err;
 
 	if (addr->family != AF_IEEE802154)
 		return -EINVAL;
@@ -604,6 +607,7 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	struct ieee802154_mac_cb *cb;
 	struct dgram_sock *ro = dgram_sk(sk);
 	struct ieee802154_addr dst_addr;
+	DECLARE_SOCKADDR(struct sockaddr_ieee802154*, daddr, msg->msg_name);
 	int hlen, tlen;
 	int err;
 
@@ -612,10 +616,20 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 		return -EOPNOTSUPP;
 	}
 
-	if (!ro->connected && !msg->msg_name)
-		return -EDESTADDRREQ;
-	else if (ro->connected && msg->msg_name)
-		return -EISCONN;
+	if (msg->msg_name) {
+		if (ro->connected)
+			return -EISCONN;
+		if (msg->msg_namelen < IEEE802154_MIN_NAMELEN)
+			return -EINVAL;
+		err = ieee802154_sockaddr_check_size(daddr, msg->msg_namelen);
+		if (err < 0)
+			return err;
+		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
+	} else {
+		if (!ro->connected)
+			return -EDESTADDRREQ;
+		dst_addr = ro->dst_addr;
+	}
 
 	if (!ro->bound)
 		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
@@ -651,16 +665,6 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	cb = mac_cb_init(skb);
 	cb->type = IEEE802154_FC_TYPE_DATA;
 	cb->ackreq = ro->want_ack;
-
-	if (msg->msg_name) {
-		DECLARE_SOCKADDR(struct sockaddr_ieee802154*,
-				 daddr, msg->msg_name);
-
-		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
-	} else {
-		dst_addr = ro->dst_addr;
-	}
-
 	cb->secen = ro->secen;
 	cb->secen_override = ro->secen_override;
 	cb->seclevel = ro->seclevel;
-- 
2.35.1

[PATCH 5.15 18/37] net: marvell: prestera: add support for for Aldrin2

[Greg Kroah-Hartman]

From: Oleksandr Mazur <oleksandr.mazur@plvision.eu>

[ Upstream commit 9124dbcc2dd6c51e81f97f63f7807118c4eb140a ]

Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.

Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>

V2:
  - retarget to net tree instead of net-next;
  - fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/prestera/prestera_pci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/marvell/prestera/prestera_pci.c b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
index a250d394da38..a8d7b889ebee 100644
--- a/drivers/net/ethernet/marvell/prestera/prestera_pci.c
+++ b/drivers/net/ethernet/marvell/prestera/prestera_pci.c
@@ -815,6 +815,7 @@ static void prestera_pci_remove(struct pci_dev *pdev)
 static const struct pci_device_id prestera_pci_devices[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xC804) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xC80C) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0xCC1E) },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, prestera_pci_devices);
-- 
2.35.1

[PATCH 5.15 19/37] ALSA: hda/hdmi: Fix the converter reuse for the silent stream

[Greg Kroah-Hartman]

From: Jaroslav Kysela <perex@perex.cz>

[ Upstream commit 5f80d6bd2b01de4cafac3302f58456bf860322fc ]

When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.

If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.

Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index d3da42e0e7b3..1994a83fa391 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1270,6 +1270,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 	set_bit(pcm_idx, &spec->pcm_in_use);
 	per_pin = get_pin(spec, pin_idx);
 	per_pin->cvt_nid = per_cvt->cvt_nid;
+	per_pin->silent_stream = false;
 	hinfo->nid = per_cvt->cvt_nid;
 
 	/* flip stripe flag for the assigned stream if supported */
-- 
2.35.1

[PATCH 5.15 20/37] um: Cleanup syscall_handler_t cast in syscalls_32.h

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/shared/sysdep/syscalls_32.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/um/shared/sysdep/syscalls_32.h b/arch/x86/um/shared/sysdep/syscalls_32.h
index 68fd2cf526fd..f6e9f84397e7 100644
--- a/arch/x86/um/shared/sysdep/syscalls_32.h
+++ b/arch/x86/um/shared/sysdep/syscalls_32.h
@@ -6,10 +6,9 @@
 #include <asm/unistd.h>
 #include <sysdep/ptrace.h>
 
-typedef long syscall_handler_t(struct pt_regs);
+typedef long syscall_handler_t(struct syscall_args);
 
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
-	((long (*)(struct syscall_args)) \
-	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
+	((*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
-- 
2.35.1

[PATCH 5.15 21/37] um: Cleanup compiler warning in arch/x86/um/tls_32.c

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
   68 |         if (!t->arch.tls_array)
      |             ^
In file included from ../arch/x86/um/asm/processor.h:10,
                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
  243 |         if (!t->arch.tls_array)
      |             ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/tls_32.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/x86/um/tls_32.c b/arch/x86/um/tls_32.c
index ac8eee093f9c..66162eafd8e8 100644
--- a/arch/x86/um/tls_32.c
+++ b/arch/x86/um/tls_32.c
@@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task)
 	struct thread_struct *t = &task->thread;
 	int idx;
 
-	if (!t->arch.tls_array)
-		return GDT_ENTRY_TLS_MIN;
-
 	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
 		if (!t->arch.tls_array[idx].present)
 			return idx + GDT_ENTRY_TLS_MIN;
@@ -240,9 +237,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info,
 {
 	struct thread_struct *t = &task->thread;
 
-	if (!t->arch.tls_array)
-		goto clear;
-
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
-- 
2.35.1

[PATCH 5.15 22/37] arch: um: Mark the stack non-executable to fix a binutils warning

[Greg Kroah-Hartman]

From: David Gow <davidgow@google.com>

[ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ]

Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.

This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:

/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions

Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/Makefile          | 8 ++++++++
 arch/x86/um/vdso/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/um/Makefile b/arch/um/Makefile
index f2fe63bfd819..f1d4d67157be 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -132,10 +132,18 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT)
 # The wrappers will select whether using "malloc" or the kernel allocator.
 LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
 
+# Avoid binutils 2.39+ warnings by marking the stack non-executable and
+# ignorning warnings for the kallsyms sections.
+LDFLAGS_EXECSTACK = -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments)
+endif
+
 LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt))
 
 # Used by link-vmlinux.sh which has special support for um link
 export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
+export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK)
 
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
index 5943387e3f35..5ca366e15c76 100644
--- a/arch/x86/um/vdso/Makefile
+++ b/arch/x86/um/vdso/Makefile
@@ -62,7 +62,7 @@ quiet_cmd_vdso = VDSO    $@
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
-VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv
+VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack
 GCOV_PROFILE := n
 
 #
-- 
2.35.1

[PATCH 5.15 23/37] net: atlantic: fix potential memory leak in aq_ndev_close()

[Greg Kroah-Hartman]

From: Jianglei Nie <niejianglei2021@163.com>

[ Upstream commit 65e5d27df61283e5390f04b09dc79cd832f95607 ]

If aq_nic_stop() fails, aq_ndev_close() returns err without calling
aq_nic_deinit() to release the relevant memory and resource, which
will lead to a memory leak.

We can fix it by deleting the if condition judgment and goto statement to
call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak.

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_main.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index e22935ce9573..f069312463fb 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
@@ -89,11 +89,8 @@ static int aq_ndev_close(struct net_device *ndev)
 	int err = 0;
 
 	err = aq_nic_stop(aq_nic);
-	if (err < 0)
-		goto err_exit;
 	aq_nic_deinit(aq_nic, true);
 
-err_exit:
 	return err;
 }
 
-- 
2.35.1

[PATCH 5.15 24/37] drm/amd/display: Fix double cursor on non-video RGB MPO

[Greg Kroah-Hartman]

From: Leo Li <sunpeng.li@amd.com>

[ Upstream commit b261509952bc19d1012cf732f853659be6ebc61e ]

[Why]

DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.

This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).

[How]

Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.

This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.

The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index e3dfea3d44a4..c826fc493e0f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -5442,7 +5442,7 @@ fill_dc_plane_info_and_addr(struct amdgpu_device *adev,
 	plane_info->visible = true;
 	plane_info->stereo_format = PLANE_STEREO_FORMAT_NONE;
 
-	plane_info->layer_index = 0;
+	plane_info->layer_index = plane_state->normalized_zpos;
 
 	ret = fill_plane_color_attributes(plane_state, plane_info->format,
 					  &plane_info->color_space);
@@ -5509,7 +5509,7 @@ static int fill_dc_plane_attributes(struct amdgpu_device *adev,
 	dc_plane_state->global_alpha = plane_info.global_alpha;
 	dc_plane_state->global_alpha_value = plane_info.global_alpha_value;
 	dc_plane_state->dcc = plane_info.dcc;
-	dc_plane_state->layer_index = plane_info.layer_index; // Always returns 0
+	dc_plane_state->layer_index = plane_info.layer_index;
 	dc_plane_state->flip_int_enabled = true;
 
 	/*
@@ -10828,6 +10828,14 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
 		}
 	}
 
+	/*
+	 * DC consults the zpos (layer_index in DC terminology) to determine the
+	 * hw plane on which to enable the hw cursor (see
+	 * `dcn10_can_pipe_disable_cursor`). By now, all modified planes are in
+	 * atomic state, so call drm helper to normalize zpos.
+	 */
+	drm_atomic_normalize_zpos(dev, state);
+
 	/* Remove exiting planes if they are modified */
 	for_each_oldnew_plane_in_state_reverse(state, plane, old_plane_state, new_plane_state, i) {
 		ret = dm_update_plane_state(dc, state, plane,
-- 
2.35.1

[PATCH 5.15 25/37] drm/amd/display: Assume an LTTPR is always present on fixed_vs links

[Greg Kroah-Hartman]

From: Michael Strauss <michael.strauss@amd.com>

[ Upstream commit 29956d0fded036a570bd8e7d4ea4b1a1730307d2 ]

[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.

[HOW]
Override internal repeater count if fixed_vs flag is set for a given link

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 6d5dc5ab3d8c..a6ff1b17fd22 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3703,6 +3703,14 @@ bool dp_retrieve_lttpr_cap(struct dc_link *link)
 				lttpr_dpcd_data[DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT -
 								DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV];
 
+		/* If this chip cap is set, at least one retimer must exist in the chain
+		 * Override count to 1 if we receive a known bad count (0 or an invalid value) */
+		if (link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN &&
+				(dp_convert_to_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) == 0)) {
+			ASSERT(0);
+			link->dpcd_caps.lttpr_caps.phy_repeater_cnt = 0x80;
+		}
+
 		/* Attempt to train in LTTPR transparent mode if repeater count exceeds 8. */
 		is_lttpr_present = (dp_convert_to_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) != 0 &&
 				link->dpcd_caps.lttpr_caps.max_lane_count > 0 &&
-- 
2.35.1

[PATCH 5.15 26/37] drm/amd/display: update gamut remap if plane has changed

[Greg Kroah-Hartman]

From: Hugo Hu <hugo.hu@amd.com>

[ Upstream commit 52bb21499cf54fa65b56d97cd0d68579c90207dd ]

[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.

[How]
Update gamut remap if planes change.

Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index 9f8d7f92300b..0de1bbbabf9a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -1513,6 +1513,7 @@ static void dcn20_update_dchubp_dpp(
 	/* Any updates are handled in dc interface, just need
 	 * to apply existing for plane enable / opp change */
 	if (pipe_ctx->update_flags.bits.enable || pipe_ctx->update_flags.bits.opp_changed
+			|| pipe_ctx->update_flags.bits.plane_changed
 			|| pipe_ctx->stream->update_flags.bits.gamut_remap
 			|| pipe_ctx->stream->update_flags.bits.out_csc) {
 		/* dpp/cm gamut remap*/
-- 
2.35.1

[PATCH 5.15 27/37] drm/amd/display: skip audio setup when audio stream is enabled

[Greg Kroah-Hartman]

From: zhikzhai <zhikai.zhai@amd.com>

[ Upstream commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 ]

[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.

[how]
skip audio setup for pipelines which audio stream has been enabled

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 62d595ded866..46d7e75e4553 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2108,7 +2108,8 @@ static void dce110_setup_audio_dto(
 			continue;
 		if (pipe_ctx->stream->signal != SIGNAL_TYPE_HDMI_TYPE_A)
 			continue;
-		if (pipe_ctx->stream_res.audio != NULL) {
+		if (pipe_ctx->stream_res.audio != NULL &&
+			pipe_ctx->stream_res.audio->enabled == false) {
 			struct audio_output audio_output;
 
 			build_audio_output(context, pipe_ctx, &audio_output);
@@ -2156,7 +2157,8 @@ static void dce110_setup_audio_dto(
 			if (!dc_is_dp_signal(pipe_ctx->stream->signal))
 				continue;
 
-			if (pipe_ctx->stream_res.audio != NULL) {
+			if (pipe_ctx->stream_res.audio != NULL &&
+				pipe_ctx->stream_res.audio->enabled == false) {
 				struct audio_output audio_output;
 
 				build_audio_output(context, pipe_ctx, &audio_output);
-- 
2.35.1

[PATCH 5.15 28/37] mmc: core: Replace with already defined values for readability

[Greg Kroah-Hartman]

From: ChanWoo Lee <cw9316.lee@samsung.com>

[ Upstream commit e427266460826bea21b70f9b2bb29decfb2c2620 ]

SD_ROCR_S18A is already defined and is used to check the rocr value, so
let's replace with already defined values for readability.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: e9233917a7e5 ("mmc: core: Terminate infinite loop in SD-UHS voltage switch")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 7e8d4abed602..eaa2679b9466 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -863,7 +863,7 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
-- 
2.35.1

[PATCH 5.15 29/37] mmc: core: Terminate infinite loop in SD-UHS voltage switch

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit e9233917a7e53980664efbc565888163c0a33c3f ]

This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.

Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.

Note that SDIO learned a similar retry loop in commit 0797e5f1453b
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:

    rocr & ocr & R4_18V_PRESENT

(i.e., it doesn't have the same bug.)

This addresses a number of crash reports seen on ChromeOS that look
like the following:

    ... // lots of repeated: ...
    <4>[13142.846061] mmc1: Skipping voltage switch
    <4>[13143.406087] mmc1: Skipping voltage switch
    <4>[13143.964724] mmc1: Skipping voltage switch
    <4>[13144.526089] mmc1: Skipping voltage switch
    <4>[13145.086088] mmc1: Skipping voltage switch
    <4>[13145.645941] mmc1: Skipping voltage switch
    <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
    ...

Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/core/sd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index eaa2679b9466..86a8a1f56583 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -863,7 +863,8 @@ int mmc_sd_get_cid(struct mmc_host *host, u32 ocr, u32 *cid, u32 *rocr)
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
+	if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) &&
+	    rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;
-- 
2.35.1

[PATCH 5.15 30/37] perf parse-events: Identify broken modifiers

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit eabd4523395e4a8f2b049165642801f2ab8ff893 ]

Previously the broken modifier causes a usage message to printed but
nothing else.

After:

  $ perf stat -e 'cycles:kk' -a sleep 2
  event syntax error: 'cycles:kk'
                              \___ Bad modifier
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events

  $ perf stat -e '{instructions,cycles}:kk' -a sleep 2
  event syntax error: '..ns,cycles}:kk'
                                    \___ Bad modifier
  Run 'perf list' for a list of valid events

   Usage: perf stat [<options>] [<command>]

      -e, --event <event>   event selector. use 'perf list' to list available events

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Denys Zagorui <dzagorui@cisco.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: ShihCheng Tu <mrtoastcheng@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20211015172132.1162559-21-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 71c86cda750b ("perf parse-events: Remove "not supported" hybrid cache events")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.y | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index d94e48e1ff9b..467a426205a0 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -183,6 +183,11 @@ group_def ':' PE_MODIFIER_EVENT
 	err = parse_events__modifier_group(list, $3);
 	free($3);
 	if (err) {
+		struct parse_events_state *parse_state = _parse_state;
+		struct parse_events_error *error = parse_state->error;
+
+		parse_events__handle_error(error, @3.first_column,
+					   strdup("Bad modifier"), NULL);
 		free_list_evsel(list);
 		YYABORT;
 	}
@@ -240,6 +245,11 @@ event_name PE_MODIFIER_EVENT
 	err = parse_events__modifier_event(list, $2, false);
 	free($2);
 	if (err) {
+		struct parse_events_state *parse_state = _parse_state;
+		struct parse_events_error *error = parse_state->error;
+
+		parse_events__handle_error(error, @2.first_column,
+					   strdup("Bad modifier"), NULL);
 		free_list_evsel(list);
 		YYABORT;
 	}
-- 
2.35.1

[PATCH 5.15 31/37] mm/huge_memory: minor cleanup for split_huge_pages_all

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

[ Upstream commit a17206dac7b262e7abed5a05e34a6bd6bd0a9b06 ]

There is nothing to do if a zone doesn't have any pages managed by the
buddy allocator. So we should check managed_zone instead. Also if a thp
is found, there's no need to traverse the subpages again.

Link: https://lkml.kernel.org/r/20220704132201.14611-13-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 2b7aa91ba0e8 ("mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/huge_memory.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 8cc150a88361..34d2979489fd 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2879,9 +2879,12 @@ static void split_huge_pages_all(void)
 	unsigned long total = 0, split = 0;
 
 	pr_debug("Split all THPs\n");
-	for_each_populated_zone(zone) {
+	for_each_zone(zone) {
+		if (!managed_zone(zone))
+			continue;
 		max_zone_pfn = zone_end_pfn(zone);
 		for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++) {
+			int nr_pages;
 			if (!pfn_valid(pfn))
 				continue;
 
@@ -2897,8 +2900,10 @@ static void split_huge_pages_all(void)
 
 			total++;
 			lock_page(page);
+			nr_pages = thp_nr_pages(page);
 			if (!split_huge_page(page))
 				split++;
+			pfn += nr_pages - 1;
 			unlock_page(page);
 next:
 			put_page(page);
-- 
2.35.1

[PATCH 5.15 32/37] mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()

[Greg Kroah-Hartman]

From: Naoya Horiguchi <naoya.horiguchi@nec.com>

[ Upstream commit 2b7aa91ba0e86b8643f5d3c83874c80599c731d7 ]

NULL pointer dereference is triggered when calling thp split via debugfs
on the system with offlined memory blocks.  With debug option enabled, the
following kernel messages are printed out:

  page:00000000467f4890 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x121c000
  flags: 0x17fffc00000000(node=0|zone=2|lastcpupid=0x1ffff)
  raw: 0017fffc00000000 0000000000000000 dead000000000122 0000000000000000
  raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
  page dumped because: unmovable page
  page:000000007d7ab72e is uninitialized and poisoned
  page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
  ------------[ cut here ]------------
  kernel BUG at include/linux/mm.h:1248!
  invalid opcode: 0000 [#1] PREEMPT SMP PTI
  CPU: 16 PID: 20964 Comm: bash Tainted: G          I        6.0.0-rc3-foll-numa+ #41
  ...
  RIP: 0010:split_huge_pages_write+0xcf4/0xe30

This shows that page_to_nid() in page_zone() is unexpectedly called for an
offlined memmap.

Use pfn_to_online_page() to get struct page in PFN walker.

Link: https://lkml.kernel.org/r/20220908041150.3430269-1-naoya.horiguchi@linux.dev
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online")      [visible after d0dc12e86b319]
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>	[5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/huge_memory.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 34d2979489fd..07941a1540cb 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2885,11 +2885,9 @@ static void split_huge_pages_all(void)
 		max_zone_pfn = zone_end_pfn(zone);
 		for (pfn = zone->zone_start_pfn; pfn < max_zone_pfn; pfn++) {
 			int nr_pages;
-			if (!pfn_valid(pfn))
-				continue;
 
-			page = pfn_to_page(pfn);
-			if (!get_page_unless_zero(page))
+			page = pfn_to_online_page(pfn);
+			if (!page || !get_page_unless_zero(page))
 				continue;
 
 			if (zone != page_zone(page))
-- 
2.35.1

[PATCH 5.15 33/37] wifi: cfg80211: fix MCS divisor value

[Greg Kroah-Hartman]

From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>

[ Upstream commit 64e966d1e84b29c9fa916cfeaabbf4013703942e ]

The Bitrate for HE/EHT MCS6 is calculated wrongly due to the
incorrect MCS divisor value for mcs6. Fix it with the proper
value.

previous mcs_divisor value = (11769/6144) = 1.915527

fixed mcs_divisor value = (11377/6144) = 1.851725

Fixes: 9c97c88d2f4b ("cfg80211: Add support to calculate and report 4096-QAM HE rates")
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/util.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/wireless/util.c b/net/wireless/util.c
index 4ddc269164f8..cb15d7f4eb05 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1353,7 +1353,7 @@ static u32 cfg80211_calculate_bitrate_he(struct rate_info *rate)
 		 25599, /*  4.166666... */
 		 17067, /*  2.777777... */
 		 12801, /*  2.083333... */
-		 11769, /*  1.851851... */
+		 11377, /*  1.851725... */
 		 10239, /*  1.666666... */
 		  8532, /*  1.388888... */
 		  7680, /*  1.250000... */
-- 
2.35.1

[PATCH 5.15 34/37] net/mlx5: Disable irq when locking lag_lock

[Greg Kroah-Hartman]

From: Vlad Buslov <vladbu@nvidia.com>

[ Upstream commit 8e93f29422ffe968d7161f91acdf0d47f5323727 ]

The lag_lock is taken from both process and softirq contexts which results
lockdep warning[0] about potential deadlock. However, just disabling
softirqs by using *_bh spinlock API is not enough since it will cause
warning in some contexts where the lock is obtained with hard irqs
disabled. To fix the issue save current irq state, disable them before
obtaining the lock an re-enable irqs from saved state after releasing it.

[0]:

[Sun Aug  7 13:12:29 2022] ================================
[Sun Aug  7 13:12:29 2022] WARNING: inconsistent lock state
[Sun Aug  7 13:12:29 2022] 5.19.0_for_upstream_debug_2022_08_04_16_06 #1 Not tainted
[Sun Aug  7 13:12:29 2022] --------------------------------
[Sun Aug  7 13:12:29 2022] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[Sun Aug  7 13:12:29 2022] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[Sun Aug  7 13:12:29 2022] ffffffffa06dc0d8 (lag_lock){+.?.}-{2:2}, at: mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022] {SOFTIRQ-ON-W} state was registered at:
[Sun Aug  7 13:12:29 2022]   lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]   _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]   mlx5_lag_add_netdev+0x13b/0x480 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_nic_enable+0x114/0x470 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_attach_netdev+0x30e/0x6a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_resume+0x105/0x160 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   mlx5e_probe+0xac3/0x14f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   auxiliary_bus_probe+0x9d/0xe0
[Sun Aug  7 13:12:29 2022]   really_probe+0x1e0/0xaa0
[Sun Aug  7 13:12:29 2022]   __driver_probe_device+0x219/0x480
[Sun Aug  7 13:12:29 2022]   driver_probe_device+0x49/0x130
[Sun Aug  7 13:12:29 2022]   __driver_attach+0x1e4/0x4d0
[Sun Aug  7 13:12:29 2022]   bus_for_each_dev+0x11e/0x1a0
[Sun Aug  7 13:12:29 2022]   bus_add_driver+0x3f4/0x5a0
[Sun Aug  7 13:12:29 2022]   driver_register+0x20f/0x390
[Sun Aug  7 13:12:29 2022]   __auxiliary_driver_register+0x14e/0x260
[Sun Aug  7 13:12:29 2022]   mlx5e_init+0x38/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]   vhost_iotlb_itree_augment_rotate+0xcb/0x180 [vhost_iotlb]
[Sun Aug  7 13:12:29 2022]   do_one_initcall+0xc4/0x400
[Sun Aug  7 13:12:29 2022]   do_init_module+0x18a/0x620
[Sun Aug  7 13:12:29 2022]   load_module+0x563a/0x7040
[Sun Aug  7 13:12:29 2022]   __do_sys_finit_module+0x122/0x1d0
[Sun Aug  7 13:12:29 2022]   do_syscall_64+0x3d/0x90
[Sun Aug  7 13:12:29 2022]   entry_SYSCALL_64_after_hwframe+0x46/0xb0
[Sun Aug  7 13:12:29 2022] irq event stamp: 3596508
[Sun Aug  7 13:12:29 2022] hardirqs last  enabled at (3596508): [<ffffffff813687c2>] __local_bh_enable_ip+0xa2/0x100
[Sun Aug  7 13:12:29 2022] hardirqs last disabled at (3596507): [<ffffffff813687da>] __local_bh_enable_ip+0xba/0x100
[Sun Aug  7 13:12:29 2022] softirqs last  enabled at (3596488): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022] softirqs last disabled at (3596495): [<ffffffff81368a2a>] irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]
                           other info that might help us debug this:
[Sun Aug  7 13:12:29 2022]  Possible unsafe locking scenario:

[Sun Aug  7 13:12:29 2022]        CPU0
[Sun Aug  7 13:12:29 2022]        ----
[Sun Aug  7 13:12:29 2022]   lock(lag_lock);
[Sun Aug  7 13:12:29 2022]   <Interrupt>
[Sun Aug  7 13:12:29 2022]     lock(lag_lock);
[Sun Aug  7 13:12:29 2022]
                            *** DEADLOCK ***

[Sun Aug  7 13:12:29 2022] 4 locks held by swapper/0/0:
[Sun Aug  7 13:12:29 2022]  #0: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: mlx5e_napi_poll+0x43/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  #1: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: netif_receive_skb_list_internal+0x2d7/0xd60
[Sun Aug  7 13:12:29 2022]  #2: ffff888144a18b58 (&br->hash_lock){+.-.}-{2:2}, at: br_fdb_update+0x301/0x570
[Sun Aug  7 13:12:29 2022]  #3: ffffffff84643260 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x5/0x1d0
[Sun Aug  7 13:12:29 2022]
                           stack backtrace:
[Sun Aug  7 13:12:29 2022] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0_for_upstream_debug_2022_08_04_16_06 #1
[Sun Aug  7 13:12:29 2022] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[Sun Aug  7 13:12:29 2022] Call Trace:
[Sun Aug  7 13:12:29 2022]  <IRQ>
[Sun Aug  7 13:12:29 2022]  dump_stack_lvl+0x57/0x7d
[Sun Aug  7 13:12:29 2022]  mark_lock.part.0.cold+0x5f/0x92
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? unwind_next_frame+0x1c4/0x1b50
[Sun Aug  7 13:12:29 2022]  ? secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? stack_access_ok+0x1d0/0x1d0
[Sun Aug  7 13:12:29 2022]  ? start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  __lock_acquire+0x1260/0x6720
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? mark_lock.part.0+0xed/0x3060
[Sun Aug  7 13:12:29 2022]  ? stack_trace_save+0x91/0xc0
[Sun Aug  7 13:12:29 2022]  lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  _raw_spin_lock+0x2c/0x40
[Sun Aug  7 13:12:29 2022]  ? mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_lag_is_shared_fdb+0x1f/0x120 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_rep_vport_num_vhca_id_get+0x1a0/0x600 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_update_work+0x90/0x90 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  mlx5_esw_bridge_switchdev_event+0x185/0x8f0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5_esw_bridge_port_obj_attr_set+0x3e0/0x3e0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  atomic_notifier_call_chain+0xd7/0x1d0
[Sun Aug  7 13:12:29 2022]  br_switchdev_fdb_notify+0xea/0x100
[Sun Aug  7 13:12:29 2022]  ? br_switchdev_set_port_flag+0x310/0x310
[Sun Aug  7 13:12:29 2022]  fdb_notify+0x11b/0x150
[Sun Aug  7 13:12:29 2022]  br_fdb_update+0x34c/0x570
[Sun Aug  7 13:12:29 2022]  ? lock_chain_count+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_fdb_add_local+0x50/0x50
[Sun Aug  7 13:12:29 2022]  ? br_allowed_ingress+0x5f/0x1070
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  br_handle_frame_finish+0x786/0x18e0
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? sctp_inet_bind_verify+0x4d/0x190
[Sun Aug  7 13:12:29 2022]  ? xlog_unpack_data+0x2e0/0x310
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_hook_thresh+0x227/0x380 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? setup_pre_routing+0x460/0x460 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing_ipv6+0x48b/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_finish_ipv6+0x5c2/0xbf0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  br_nf_pre_routing_ipv6+0x4c6/0x69c [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_validate_ipv6+0x9e0/0x9e0 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_forward_arp+0xb70/0xb70 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  ? br_nf_pre_routing+0xacf/0x1160 [br_netfilter]
[Sun Aug  7 13:12:29 2022]  br_handle_frame+0x8a9/0x1270
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? br_handle_local_finish+0x20/0x20
[Sun Aug  7 13:12:29 2022]  ? bond_handle_frame+0xf9/0xac0 [bonding]
[Sun Aug  7 13:12:29 2022]  ? br_handle_frame_finish+0x18e0/0x18e0
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_core+0x7c0/0x2c70
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  ? generic_xdp_tx+0x5b0/0x5b0
[Sun Aug  7 13:12:29 2022]  ? __lock_acquire+0xd6f/0x6720
[Sun Aug  7 13:12:29 2022]  ? register_lock_class+0x1880/0x1880
[Sun Aug  7 13:12:29 2022]  ? check_chain_key+0x24a/0x580
[Sun Aug  7 13:12:29 2022]  __netif_receive_skb_list_core+0x2d7/0x8a0
[Sun Aug  7 13:12:29 2022]  ? lock_acquire+0x1c1/0x550
[Sun Aug  7 13:12:29 2022]  ? process_backlog+0x960/0x960
[Sun Aug  7 13:12:29 2022]  ? lockdep_hardirqs_on_prepare+0x129/0x400
[Sun Aug  7 13:12:29 2022]  ? kvm_clock_get_cycles+0x14/0x20
[Sun Aug  7 13:12:29 2022]  netif_receive_skb_list_internal+0x5f4/0xd60
[Sun Aug  7 13:12:29 2022]  ? do_xdp_generic+0x150/0x150
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_rx_cq+0xf6b/0x2960 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? mlx5e_poll_ico_cq+0x3d/0x1590 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  napi_complete_done+0x188/0x710
[Sun Aug  7 13:12:29 2022]  mlx5e_napi_poll+0x4e9/0x20a0 [mlx5_core]
[Sun Aug  7 13:12:29 2022]  ? __queue_work+0x53c/0xeb0
[Sun Aug  7 13:12:29 2022]  __napi_poll+0x9f/0x540
[Sun Aug  7 13:12:29 2022]  net_rx_action+0x420/0xb70
[Sun Aug  7 13:12:29 2022]  ? napi_threaded_poll+0x470/0x470
[Sun Aug  7 13:12:29 2022]  ? __common_interrupt+0x79/0x1a0
[Sun Aug  7 13:12:29 2022]  __do_softirq+0x271/0x92c
[Sun Aug  7 13:12:29 2022]  irq_exit_rcu+0x11a/0x170
[Sun Aug  7 13:12:29 2022]  common_interrupt+0x7d/0xa0
[Sun Aug  7 13:12:29 2022]  </IRQ>
[Sun Aug  7 13:12:29 2022]  <TASK>
[Sun Aug  7 13:12:29 2022]  asm_common_interrupt+0x22/0x40
[Sun Aug  7 13:12:29 2022] RIP: 0010:default_idle+0x42/0x60
[Sun Aug  7 13:12:29 2022] Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 6b f1 22 02 85 c0 7e 07 0f 00 2d 80 3b 4a 00 fb f4 <c3> 48 c7 c7 e0 07 7e 85 e8 21 bd 40 fe eb de 66 66 2e 0f 1f 84 00
[Sun Aug  7 13:12:29 2022] RSP: 0018:ffffffff84407e18 EFLAGS: 00000242
[Sun Aug  7 13:12:29 2022] RAX: 0000000000000001 RBX: ffffffff84ec4a68 RCX: 1ffffffff0afc0fc
[Sun Aug  7 13:12:29 2022] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835b1fac
[Sun Aug  7 13:12:29 2022] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff8884d2c44ac3
[Sun Aug  7 13:12:29 2022] R10: ffffed109a588958 R11: 00000000ffffffff R12: 0000000000000000
[Sun Aug  7 13:12:29 2022] R13: ffffffff84efac20 R14: 0000000000000000 R15: dffffc0000000000
[Sun Aug  7 13:12:29 2022]  ? default_idle_call+0xcc/0x460
[Sun Aug  7 13:12:29 2022]  default_idle_call+0xec/0x460
[Sun Aug  7 13:12:29 2022]  do_idle+0x394/0x450
[Sun Aug  7 13:12:29 2022]  ? arch_cpu_idle_exit+0x40/0x40
[Sun Aug  7 13:12:29 2022]  cpu_startup_entry+0x19/0x20
[Sun Aug  7 13:12:29 2022]  rest_init+0x156/0x250
[Sun Aug  7 13:12:29 2022]  arch_call_rest_init+0xf/0x15
[Sun Aug  7 13:12:29 2022]  start_kernel+0x3a7/0x3c5
[Sun Aug  7 13:12:29 2022]  secondary_startup_64_no_verify+0xcd/0xdb
[Sun Aug  7 13:12:29 2022]  </TASK>

Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/lag.c | 55 +++++++++++--------
 1 file changed, 33 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index 0fbb239559f3..5f8b7f3735b6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -691,30 +691,32 @@ static void mlx5_ldev_add_netdev(struct mlx5_lag *ldev,
 				 struct net_device *netdev)
 {
 	unsigned int fn = PCI_FUNC(dev->pdev->devfn);
+	unsigned long flags;
 
 	if (fn >= MLX5_MAX_PORTS)
 		return;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev->pf[fn].netdev = netdev;
 	ldev->tracker.netdev_state[fn].link_up = 0;
 	ldev->tracker.netdev_state[fn].tx_enabled = 0;
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 }
 
 static void mlx5_ldev_remove_netdev(struct mlx5_lag *ldev,
 				    struct net_device *netdev)
 {
+	unsigned long flags;
 	int i;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	for (i = 0; i < MLX5_MAX_PORTS; i++) {
 		if (ldev->pf[i].netdev == netdev) {
 			ldev->pf[i].netdev = NULL;
 			break;
 		}
 	}
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 }
 
 static void mlx5_ldev_add_mdev(struct mlx5_lag *ldev,
@@ -855,12 +857,13 @@ void mlx5_lag_add_netdev(struct mlx5_core_dev *dev,
 bool mlx5_lag_is_roce(struct mlx5_core_dev *dev)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	bool res;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	res  = ldev && __mlx5_lag_is_roce(ldev);
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return res;
 }
@@ -869,12 +872,13 @@ EXPORT_SYMBOL(mlx5_lag_is_roce);
 bool mlx5_lag_is_active(struct mlx5_core_dev *dev)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	bool res;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	res  = ldev && __mlx5_lag_is_active(ldev);
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return res;
 }
@@ -883,13 +887,14 @@ EXPORT_SYMBOL(mlx5_lag_is_active);
 bool mlx5_lag_is_master(struct mlx5_core_dev *dev)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	bool res;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	res = ldev && __mlx5_lag_is_active(ldev) &&
 		dev == ldev->pf[MLX5_LAG_P1].dev;
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return res;
 }
@@ -898,12 +903,13 @@ EXPORT_SYMBOL(mlx5_lag_is_master);
 bool mlx5_lag_is_sriov(struct mlx5_core_dev *dev)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	bool res;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	res  = ldev && __mlx5_lag_is_sriov(ldev);
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return res;
 }
@@ -912,12 +918,13 @@ EXPORT_SYMBOL(mlx5_lag_is_sriov);
 bool mlx5_lag_is_shared_fdb(struct mlx5_core_dev *dev)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	bool res;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	res = ldev && __mlx5_lag_is_sriov(ldev) && ldev->shared_fdb;
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return res;
 }
@@ -965,8 +972,9 @@ struct net_device *mlx5_lag_get_roce_netdev(struct mlx5_core_dev *dev)
 {
 	struct net_device *ndev = NULL;
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 
 	if (!(ldev && __mlx5_lag_is_roce(ldev)))
@@ -983,7 +991,7 @@ struct net_device *mlx5_lag_get_roce_netdev(struct mlx5_core_dev *dev)
 		dev_hold(ndev);
 
 unlock:
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	return ndev;
 }
@@ -993,9 +1001,10 @@ u8 mlx5_lag_get_slave_port(struct mlx5_core_dev *dev,
 			   struct net_device *slave)
 {
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	u8 port = 0;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	if (!(ldev && __mlx5_lag_is_roce(ldev)))
 		goto unlock;
@@ -1008,7 +1017,7 @@ u8 mlx5_lag_get_slave_port(struct mlx5_core_dev *dev,
 	port = ldev->v2p_map[port];
 
 unlock:
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 	return port;
 }
 EXPORT_SYMBOL(mlx5_lag_get_slave_port);
@@ -1017,8 +1026,9 @@ struct mlx5_core_dev *mlx5_lag_get_peer_mdev(struct mlx5_core_dev *dev)
 {
 	struct mlx5_core_dev *peer_dev = NULL;
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	if (!ldev)
 		goto unlock;
@@ -1028,7 +1038,7 @@ struct mlx5_core_dev *mlx5_lag_get_peer_mdev(struct mlx5_core_dev *dev)
 			   ldev->pf[MLX5_LAG_P1].dev;
 
 unlock:
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 	return peer_dev;
 }
 EXPORT_SYMBOL(mlx5_lag_get_peer_mdev);
@@ -1041,6 +1051,7 @@ int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev,
 	int outlen = MLX5_ST_SZ_BYTES(query_cong_statistics_out);
 	struct mlx5_core_dev *mdev[MLX5_MAX_PORTS];
 	struct mlx5_lag *ldev;
+	unsigned long flags;
 	int num_ports;
 	int ret, i, j;
 	void *out;
@@ -1051,7 +1062,7 @@ int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev,
 
 	memset(values, 0, sizeof(*values) * num_counters);
 
-	spin_lock(&lag_lock);
+	spin_lock_irqsave(&lag_lock, flags);
 	ldev = mlx5_lag_dev(dev);
 	if (ldev && __mlx5_lag_is_active(ldev)) {
 		num_ports = MLX5_MAX_PORTS;
@@ -1061,7 +1072,7 @@ int mlx5_lag_query_cong_counters(struct mlx5_core_dev *dev,
 		num_ports = 1;
 		mdev[MLX5_LAG_P1] = dev;
 	}
-	spin_unlock(&lag_lock);
+	spin_unlock_irqrestore(&lag_lock, flags);
 
 	for (i = 0; i < num_ports; ++i) {
 		u32 in[MLX5_ST_SZ_DW(query_cong_statistics_in)] = {};
-- 
2.35.1

[PATCH 5.15 35/37] usb: mon: make mmapped memory read only

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit a659daf63d16aa883be42f3f34ff84235c302198 upstream.

Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.

The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.

Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.

Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu>	# for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mon/mon_bin.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *fil
 {
 	/* don't do anything here: "fault" will set up page table entries */
 	vma->vm_ops = &mon_bin_vm_ops;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	vma->vm_flags &= ~VM_MAYWRITE;
 	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
 	vma->vm_private_data = filp->private_data;
 	mon_bin_vma_open(vma);

[PATCH 5.15 36/37] USB: serial: ftdi_sio: fix 300 bps rate for SIO

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream.

The 300 bps rate of SIO devices has been mapped to 9600 bps since
2003... Let's fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1319,8 +1319,7 @@ static u32 get_ftdi_divisor(struct tty_s
 		case 38400: div_value = ftdi_sio_b38400; break;
 		case 57600: div_value = ftdi_sio_b57600;  break;
 		case 115200: div_value = ftdi_sio_b115200; break;
-		} /* baud */
-		if (div_value == 0) {
+		default:
 			dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
 				__func__,  baud);
 			div_value = ftdi_sio_b9600;

[PATCH 5.15 37/37] rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream.

The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()").  This fixes W=1 warning:

  In function ‘qcom_glink_rx_close’,
    inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
  drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   1549 |                 strncpy(chinfo.name, channel->name, sizeof(chinfo.name));

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/qcom_glink_native.c |    2 +-
 drivers/rpmsg/qcom_smd.c          |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1488,7 +1488,7 @@ static void qcom_glink_rx_close(struct q
 	cancel_work_sync(&channel->intent_work);
 
 	if (channel->rpdev) {
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1089,7 +1089,7 @@ static int qcom_smd_create_device(struct
 
 	/* Assign public information to the rpmsg_device */
 	rpdev = &qsdev->rpdev;
-	strncpy(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
+	strscpy_pad(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
 	rpdev->src = RPMSG_ADDR_ANY;
 	rpdev->dst = RPMSG_ADDR_ANY;
 
@@ -1320,7 +1320,7 @@ static void qcom_channel_state_worker(st
 
 		spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 		rpmsg_unregister_device(&edge->dev, &chinfo);

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Naresh Kamboju]

On Mon, 10 Oct 2022 at 12:38, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.73-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h


Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.15.73-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: ebe70cd7f54131bf594f842a69d363a9e2812d67
* git describe: v5.15.72-38-gebe70cd7f541
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.72-38-gebe70cd7f541

## No Test Regressions (compared to v5.15.71-71-gc68173b2012b)

## No Metric Regressions (compared to v5.15.71-71-gc68173b2012b)

## No Test Fixes (compared to v5.15.71-71-gc68173b2012b)

## No Metric Fixes (compared to v5.15.71-71-gc68173b2012b)

## Test result summary
total: 101182, pass: 89631, fail: 630, skip: 10732, xfail: 189

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 339 total, 336 passed, 3 failed
* arm64: 72 total, 70 passed, 2 failed
* i386: 61 total, 55 passed, 6 failed
* mips: 62 total, 59 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 69 total, 66 passed, 3 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 30 total, 27 passed, 3 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x86_64: 65 total, 63 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-[
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Guenter Roeck]

On 10/10/22 00:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 

Building h8300:allnoconfig ... failed
--------------
Error log:
In file included from include/linux/fs.h:6,
                  from include/linux/huge_mm.h:8,
                  from include/linux/mm.h:727,
                  from include/linux/pid_namespace.h:7,
                  from include/linux/ptrace.h:10,
                  from arch/h8300/kernel/asm-offsets.c:15:
include/linux/wait_bit.h: In function 'wait_on_bit':
include/linux/wait_bit.h:74:14: error: implicit declaration of function 'test_bit_acquire'; did you mean 'test_bit_le'? [-Werror=implicit-function-declaration]
    74 |         if (!test_bit_acquire(bit, word))
       |              ^~~~~~~~~~~~~~~~
       |              test_bit_le

This affects h8300 builds in all branches all the way back to v4.9.y.
It also affects release candidates for various other architectures
in v4.9.y..v5.10.y. In v4.9.y.queue, for example, I see 56 build
failures out of 164 builds; most if not all of those can be attributed
to problems with test_bit_acquire() - either due to a missing or due
to a bad backport.

I can only hope that fix for the the problem that required the
test_bit_acquire() backport is worth the trouble it causes.

Guenter

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Florian Fainelli]

On 10/10/22 00:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.73-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Ron Economos]

On 10/10/22 12:05 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.73-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Greg Kroah-Hartman]

On Mon, Oct 10, 2022 at 10:49:10AM -0700, Guenter Roeck wrote:
> On 10/10/22 00:05, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.73 release.
> > There are 37 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Building h8300:allnoconfig ... failed
> --------------
> Error log:
> In file included from include/linux/fs.h:6,
>                  from include/linux/huge_mm.h:8,
>                  from include/linux/mm.h:727,
>                  from include/linux/pid_namespace.h:7,
>                  from include/linux/ptrace.h:10,
>                  from arch/h8300/kernel/asm-offsets.c:15:
> include/linux/wait_bit.h: In function 'wait_on_bit':
> include/linux/wait_bit.h:74:14: error: implicit declaration of function 'test_bit_acquire'; did you mean 'test_bit_le'? [-Werror=implicit-function-declaration]
>    74 |         if (!test_bit_acquire(bit, word))
>       |              ^~~~~~~~~~~~~~~~
>       |              test_bit_le
> 
> This affects h8300 builds in all branches all the way back to v4.9.y.
> It also affects release candidates for various other architectures
> in v4.9.y..v5.10.y. In v4.9.y.queue, for example, I see 56 build
> failures out of 164 builds; most if not all of those can be attributed
> to problems with test_bit_acquire() - either due to a missing or due
> to a bad backport.
> 
> I can only hope that fix for the the problem that required the
> test_bit_acquire() backport is worth the trouble it causes.

Not yet, no.  I'm dropping them all.

thanks,

greg k-h

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Shuah Khan]

On 10/10/22 01:05, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 12 Oct 2022 07:03:19 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.73-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 538 bytes --]

On Mon, Oct 10, 2022 at 09:05:19AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.73 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
powerpc (ps3_defconfig, GCC 12.1.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH 5.15 00/37] 5.15.73-rc1 review

[Bagas Sanjaya]

[-- Attachment #1: Type: text/plain, Size: 692 bytes --]

On Tue, Oct 11, 2022 at 11:23:45AM +0700, Bagas Sanjaya wrote:
> On Mon, Oct 10, 2022 at 09:05:19AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.15.73 release.
> > There are 37 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> 
> Successfully cross-compiled for arm64 (bcm2711_defconfig, GCC 10.2.0) and
> powerpc (ps3_defconfig, GCC 12.1.0).
> 
> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
> 

Oops, replied to wrong -rc; please ignore the trailer above.

-- 
An old man doll... just what I always wanted! - Clara

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]