[PATCH 5.4 00/38] 5.4.218-rc1 review

[PATCH 5.4 00/38] 5.4.218-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.218 release.
There are 38 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.218-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.218-rc1

Cameron Gutman <aicommander@gmail.com>
    Input: xpad - fix wireless 360 controller breaking after suspend

Pavel Rojtberg <rojtberg@gmail.com>
    Input: xpad - add supported devices as contributed on github

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: update hidden BSSes to avoid WARN_ON

Johannes Berg <johannes.berg@intel.com>
    wifi: mac80211_hwsim: avoid mac80211 warning on bad rate

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: avoid nontransmitted BSS list corruption

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: fix BSS refcounting bugs

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: ensure length byte is present before access

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211/mac80211: reject bad MBSSID elements

Johannes Berg <johannes.berg@intel.com>
    wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()

Jason A. Donenfeld <Jason@zx2c4.com>
    random: use expired timer rather than wq for mixing fast pool

Jason A. Donenfeld <Jason@zx2c4.com>
    random: avoid reading two cache lines on irq randomness

Jason A. Donenfeld <Jason@zx2c4.com>
    random: restore O_NONBLOCK support

Frank Wunderlich <frank-w@public-files.de>
    USB: serial: qcserial: add new usb-id for Dell branded EM7455

Linus Torvalds <torvalds@linux-foundation.org>
    scsi: stex: Properly zero out the passthrough command structure

Orlando Chamberlain <redecorating@protonmail.com>
    efi: Correct Macmini DMI match in uefi cert quirk

Takashi Iwai <tiwai@suse.de>
    ALSA: hda: Fix position reporting on Poulsbo

Jason A. Donenfeld <Jason@zx2c4.com>
    random: clamp credited irq bits to maximum mixed

Hu Weiwen <sehuww@mail.scut.edu.cn>
    ceph: don't truncate file in atomic_open

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix leak of nilfs_root in case of writer thread creation failure

Ryusuke Konishi <konishi.ryusuke@gmail.com>
    nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()

Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
    rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

Brian Norris <briannorris@chromium.org>
    mmc: core: Terminate infinite loop in SD-UHS voltage switch

ChanWoo Lee <cw9316.lee@samsung.com>
    mmc: core: Replace with already defined values for readability

Johan Hovold <johan@kernel.org>
    USB: serial: ftdi_sio: fix 300 bps rate for SIO

Tadeusz Struk <tadeusz.struk@linaro.org>
    usb: mon: make mmapped memory read only

David Gow <davidgow@google.com>
    arch: um: Mark the stack non-executable to fix a binutils warning

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup compiler warning in arch/x86/um/tls_32.c

Lukas Straub <lukasstraub2@web.de>
    um: Cleanup syscall_handler_t cast in syscalls_32.h

Haimin Zhang <tcs.kernel@gmail.com>
    net/ieee802154: fix uninit value bug in dgram_sendmsg

Letu Ren <fantasquex@gmail.com>
    scsi: qedf: Fix a UAF bug in __qedf_probe()

Sergei Antonov <saproj@gmail.com>
    ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

Swati Agarwal <swati.agarwal@xilinx.com>
    dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

Cristian Marussi <cristian.marussi@arm.com>
    firmware: arm_scmi: Add SCMI PM driver remove routine

Dongliang Mu <mudongliangabcd@gmail.com>
    fs: fix UAF/GPF bug in nilfs_mdt_destroy

Alexey Dobriyan <adobriyan@gmail.com>
    perf tools: Fixup get_current_dir_name() compilation

Steven Price <steven.price@arm.com>
    mm: pagewalk: Fix race between unmap and page walker


-------------

Diffstat:

 .../devicetree/bindings/dma/moxa,moxart-dma.txt    |  4 +-
 Makefile                                           |  4 +-
 arch/arm/boot/dts/moxart-uc7112lx.dts              |  2 +-
 arch/arm/boot/dts/moxart.dtsi                      |  4 +-
 arch/um/Makefile                                   |  8 +++
 arch/x86/um/shared/sysdep/syscalls_32.h            |  5 +-
 arch/x86/um/tls_32.c                               |  6 --
 arch/x86/um/vdso/Makefile                          |  2 +-
 drivers/char/mem.c                                 |  4 +-
 drivers/char/random.c                              | 25 ++++---
 drivers/dma/xilinx/xilinx_dma.c                    |  8 ++-
 drivers/firmware/arm_scmi/scmi_pm_domain.c         | 20 ++++++
 drivers/input/joystick/xpad.c                      | 20 +++++-
 drivers/mmc/core/sd.c                              |  3 +-
 drivers/net/wireless/mac80211_hwsim.c              |  2 +
 drivers/rpmsg/qcom_glink_native.c                  |  2 +-
 drivers/rpmsg/qcom_smd.c                           |  4 +-
 drivers/scsi/qedf/qedf_main.c                      |  5 --
 drivers/scsi/stex.c                                | 17 ++---
 drivers/usb/mon/mon_bin.c                          |  5 ++
 drivers/usb/serial/ftdi_sio.c                      |  3 +-
 drivers/usb/serial/qcserial.c                      |  1 +
 fs/ceph/file.c                                     | 10 ++-
 fs/inode.c                                         |  7 +-
 fs/nilfs2/inode.c                                  |  2 +
 fs/nilfs2/segment.c                                | 21 +++---
 include/net/ieee802154_netdev.h                    | 37 +++++++++++
 include/scsi/scsi_cmnd.h                           |  2 +-
 mm/pagewalk.c                                      | 13 ++--
 net/ieee802154/socket.c                            | 42 ++++++------
 net/mac80211/util.c                                |  2 +
 net/wireless/scan.c                                | 77 ++++++++++++++--------
 security/integrity/platform_certs/load_uefi.c      |  2 +-
 sound/pci/hda/hda_intel.c                          |  3 +-
 tools/perf/util/get_current_dir_name.c             |  3 +-
 35 files changed, 256 insertions(+), 119 deletions(-)

[PATCH 5.4 01/38] mm: pagewalk: Fix race between unmap and page walker

[Greg Kroah-Hartman]

From: Steven Price <steven.price@arm.com>

commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 upstream.

The mmap lock protects the page walker from changes to the page tables
during the walk.  However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.

For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.

For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.

This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging.  As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.

Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[manually backported. backport note: walk_page_range_novma() does not exist in
5.4, so I'm omitting it from the backport]
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/pagewalk.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -38,7 +38,7 @@ static int walk_pmd_range(pud_t *pud, un
 	do {
 again:
 		next = pmd_addr_end(addr, end);
-		if (pmd_none(*pmd) || !walk->vma) {
+		if (pmd_none(*pmd)) {
 			if (ops->pte_hole)
 				err = ops->pte_hole(addr, next, walk);
 			if (err)
@@ -84,7 +84,7 @@ static int walk_pud_range(p4d_t *p4d, un
 	do {
  again:
 		next = pud_addr_end(addr, end);
-		if (pud_none(*pud) || !walk->vma) {
+		if (pud_none(*pud)) {
 			if (ops->pte_hole)
 				err = ops->pte_hole(addr, next, walk);
 			if (err)
@@ -254,7 +254,7 @@ static int __walk_page_range(unsigned lo
 	int err = 0;
 	struct vm_area_struct *vma = walk->vma;
 
-	if (vma && is_vm_hugetlb_page(vma)) {
+	if (is_vm_hugetlb_page(vma)) {
 		if (walk->ops->hugetlb_entry)
 			err = walk_hugetlb_range(start, end, walk);
 	} else
@@ -324,9 +324,13 @@ int walk_page_range(struct mm_struct *mm
 		if (!vma) { /* after the last vma */
 			walk.vma = NULL;
 			next = end;
+			if (ops->pte_hole)
+				err = ops->pte_hole(start, next, &walk);
 		} else if (start < vma->vm_start) { /* outside vma */
 			walk.vma = NULL;
 			next = min(end, vma->vm_start);
+			if (ops->pte_hole)
+				err = ops->pte_hole(start, next, &walk);
 		} else { /* inside vma */
 			walk.vma = vma;
 			next = min(end, vma->vm_end);
@@ -344,9 +348,8 @@ int walk_page_range(struct mm_struct *mm
 			}
 			if (err < 0)
 				break;
-		}
-		if (walk.vma || walk.ops->pte_hole)
 			err = __walk_page_range(start, next, &walk);
+		}
 		if (err)
 			break;
 	} while (start = next, start < end);

[PATCH 5.4 02/38] perf tools: Fixup get_current_dir_name() compilation

[Greg Kroah-Hartman]

From: Alexey Dobriyan <adobriyan@gmail.com>

commit 128dbd78bd673f9edbc4413072b23efb6657feb0 upstream.

strdup() prototype doesn't live in stdlib.h .

Add limits.h for PATH_MAX definition as well.

This fixes the build on Android.

Signed-off-by: Alexey Dobriyan (SK hynix) <adobriyan@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/YRukaQbrgDWhiwGr@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/get_current_dir_name.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/perf/util/get_current_dir_name.c
+++ b/tools/perf/util/get_current_dir_name.c
@@ -3,8 +3,9 @@
 //
 #ifndef HAVE_GET_CURRENT_DIR_NAME
 #include "get_current_dir_name.h"
+#include <limits.h>
+#include <string.h>
 #include <unistd.h>
-#include <stdlib.h>
 
 /* Android's 'bionic' library, for one, doesn't have this */
 

[PATCH 5.4 03/38] fs: fix UAF/GPF bug in nilfs_mdt_destroy

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

commit 2e488f13755ffbb60f307e991b27024716a33b29 upstream.

In alloc_inode, inode_init_always() could return -ENOMEM if
security_inode_alloc() fails, which causes inode->i_private
uninitialized. Then nilfs_is_metadata_file_inode() returns
true and nilfs_free_inode() wrongly calls nilfs_mdt_destroy(),
which frees the uninitialized inode->i_private
and leads to crashes(e.g., UAF/GPF).

Fix this by moving security_inode_alloc just prior to
this_cpu_inc(nr_inodes)

Link: https://lkml.kernel.org/r/CAFcO6XOcf1Jj2SeGt=jJV59wmhESeSKpfR0omdFRq+J9nD1vfQ@mail.gmail.com
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: Jiacheng Xu <stitch@zju.edu.cn>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/inode.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/fs/inode.c
+++ b/fs/inode.c
@@ -167,8 +167,6 @@ int inode_init_always(struct super_block
 	inode->i_wb_frn_history = 0;
 #endif
 
-	if (security_inode_alloc(inode))
-		goto out;
 	spin_lock_init(&inode->i_lock);
 	lockdep_set_class(&inode->i_lock, &sb->s_type->i_lock_key);
 
@@ -199,11 +197,12 @@ int inode_init_always(struct super_block
 	inode->i_fsnotify_mask = 0;
 #endif
 	inode->i_flctx = NULL;
+
+	if (unlikely(security_inode_alloc(inode)))
+		return -ENOMEM;
 	this_cpu_inc(nr_inodes);
 
 	return 0;
-out:
-	return -ENOMEM;
 }
 EXPORT_SYMBOL(inode_init_always);
 

[PATCH 5.4 04/38] firmware: arm_scmi: Add SCMI PM driver remove routine

[Greg Kroah-Hartman]

From: Cristian Marussi <cristian.marussi@arm.com>

[ Upstream commit dea796fcab0a219830831c070b8dc367d7e0f708 ]

Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.

As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:

 | debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
 | debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
 | debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
 | debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!

Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.

Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/scmi_pm_domain.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/firmware/arm_scmi/scmi_pm_domain.c b/drivers/firmware/arm_scmi/scmi_pm_domain.c
index 177874adccf0..b0c8962b9885 100644
--- a/drivers/firmware/arm_scmi/scmi_pm_domain.c
+++ b/drivers/firmware/arm_scmi/scmi_pm_domain.c
@@ -106,9 +106,28 @@ static int scmi_pm_domain_probe(struct scmi_device *sdev)
 	scmi_pd_data->domains = domains;
 	scmi_pd_data->num_domains = num_domains;
 
+	dev_set_drvdata(dev, scmi_pd_data);
+
 	return of_genpd_add_provider_onecell(np, scmi_pd_data);
 }
 
+static void scmi_pm_domain_remove(struct scmi_device *sdev)
+{
+	int i;
+	struct genpd_onecell_data *scmi_pd_data;
+	struct device *dev = &sdev->dev;
+	struct device_node *np = dev->of_node;
+
+	of_genpd_del_provider(np);
+
+	scmi_pd_data = dev_get_drvdata(dev);
+	for (i = 0; i < scmi_pd_data->num_domains; i++) {
+		if (!scmi_pd_data->domains[i])
+			continue;
+		pm_genpd_remove(scmi_pd_data->domains[i]);
+	}
+}
+
 static const struct scmi_device_id scmi_id_table[] = {
 	{ SCMI_PROTOCOL_POWER },
 	{ },
@@ -118,6 +137,7 @@ MODULE_DEVICE_TABLE(scmi, scmi_id_table);
 static struct scmi_driver scmi_power_domain_driver = {
 	.name = "scmi-power-domain",
 	.probe = scmi_pm_domain_probe,
+	.remove = scmi_pm_domain_remove,
 	.id_table = scmi_id_table,
 };
 module_scmi_driver(scmi_power_domain_driver);
-- 
2.35.1

[PATCH 5.4 05/38] dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 462bce790e6a7e68620a4ce260cc38f7ed0255d5 ]

Free the allocated resources for missing xlnx,num-fstores property.

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-3-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 7729b8d22553..792776c86ee8 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2683,7 +2683,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		if (err < 0) {
 			dev_err(xdev->dev,
 				"missing xlnx,num-fstores property\n");
-			return err;
+			goto disable_clks;
 		}
 
 		err = of_property_read_u32(node, "xlnx,flush-fsync",
-- 
2.35.1

[PATCH 5.4 06/38] dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure

[Greg Kroah-Hartman]

From: Swati Agarwal <swati.agarwal@xilinx.com>

[ Upstream commit 8f2b6bc79c32f0fa60df000ae387a790ec80eae9 ]

The driver does not handle the failure case while calling
dma_set_mask_and_coherent API.

In case of failure, capture the return value of API and then report an
error.

Addresses-coverity: Unchecked return value (CHECKED_RETURN)

Signed-off-by: Swati Agarwal <swati.agarwal@xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20220817061125.4720-4-swati.agarwal@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 792776c86ee8..3bb711e735ab 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -2703,7 +2703,11 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	err = dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
+	if (err < 0) {
+		dev_err(xdev->dev, "DMA mask error %d\n", err);
+		goto disable_clks;
+	}
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
-- 
2.35.1

[PATCH 5.4 07/38] ARM: dts: fix Moxa SDIO compatible, remove sdhci misnomer

[Greg Kroah-Hartman]

From: Sergei Antonov <saproj@gmail.com>

[ Upstream commit 02181e68275d28cab3c3f755852770367f1bc229 ]

Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".

But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".

Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.

Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt | 4 ++--
 arch/arm/boot/dts/moxart-uc7112lx.dts                     | 2 +-
 arch/arm/boot/dts/moxart.dtsi                             | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts
index eb5291b0ee3a..e07b807b4cec 100644
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts
+++ b/arch/arm/boot/dts/moxart-uc7112lx.dts
@@ -79,7 +79,7 @@ &clk_pll {
 	clocks = <&ref12>;
 };
 
-&sdhci {
+&mmc {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi
index f5f070a87482..764832ddfa78 100644
--- a/arch/arm/boot/dts/moxart.dtsi
+++ b/arch/arm/boot/dts/moxart.dtsi
@@ -93,8 +93,8 @@ watchdog: watchdog@98500000 {
 			clock-names = "PCLK";
 		};
 
-		sdhci: sdhci@98e00000 {
-			compatible = "moxa,moxart-sdhci";
+		mmc: mmc@98e00000 {
+			compatible = "moxa,moxart-mmc";
 			reg = <0x98e00000 0x5C>;
 			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_apb>;
-- 
2.35.1

[PATCH 5.4 08/38] scsi: qedf: Fix a UAF bug in __qedf_probe()

[Greg Kroah-Hartman]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]

In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.

There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.

The KASAN logs are as follows:

[    2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[    2.312969]
[    2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    2.312969] Call Trace:
[    2.312969]  dump_stack_lvl+0x59/0x7b
[    2.312969]  print_address_description+0x7c/0x3b0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  __kasan_report+0x160/0x1c0
[    2.312969]  ? __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  kasan_report+0x4b/0x70
[    2.312969]  ? kobject_put+0x25d/0x290
[    2.312969]  kasan_check_range+0x2ca/0x310
[    2.312969]  __qedf_probe+0x5dcf/0x6bc0
[    2.312969]  ? selinux_kernfs_init_security+0xdc/0x5f0
[    2.312969]  ? trace_rpm_return_int_rcuidle+0x18/0x120
[    2.312969]  ? rpm_resume+0xa5c/0x16e0
[    2.312969]  ? qedf_get_generic_tlv_data+0x160/0x160
[    2.312969]  local_pci_probe+0x13c/0x1f0
[    2.312969]  pci_device_probe+0x37e/0x6c0

Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qedf/qedf_main.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index c95e04cc6424..f864ef059d29 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -3544,11 +3544,6 @@ static int __qedf_probe(struct pci_dev *pdev, int mode)
 err1:
 	scsi_host_put(lport->host);
 err0:
-	if (qedf) {
-		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_DISC, "Probe done.\n");
-
-		clear_bit(QEDF_PROBING, &qedf->flags);
-	}
 	return rc;
 }
 
-- 
2.35.1

[PATCH 5.4 09/38] net/ieee802154: fix uninit value bug in dgram_sendmsg

[Greg Kroah-Hartman]

From: Haimin Zhang <tcs.kernel@gmail.com>

[ Upstream commit 94160108a70c8af17fa1484a37e05181c0e094af ]

There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.

We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.

Also fixed in raw_bind, dgram_bind, dgram_connect.

Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/ieee802154_netdev.h | 37 +++++++++++++++++++++++++++++
 net/ieee802154/socket.c         | 42 ++++++++++++++++++---------------
 2 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/include/net/ieee802154_netdev.h b/include/net/ieee802154_netdev.h
index d0d188c3294b..a8994f307fc3 100644
--- a/include/net/ieee802154_netdev.h
+++ b/include/net/ieee802154_netdev.h
@@ -15,6 +15,22 @@
 #ifndef IEEE802154_NETDEVICE_H
 #define IEEE802154_NETDEVICE_H
 
+#define IEEE802154_REQUIRED_SIZE(struct_type, member) \
+	(offsetof(typeof(struct_type), member) + \
+	sizeof(((typeof(struct_type) *)(NULL))->member))
+
+#define IEEE802154_ADDR_OFFSET \
+	offsetof(typeof(struct sockaddr_ieee802154), addr)
+
+#define IEEE802154_MIN_NAMELEN (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, addr_type))
+
+#define IEEE802154_NAMELEN_SHORT (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, short_addr))
+
+#define IEEE802154_NAMELEN_LONG (IEEE802154_ADDR_OFFSET + \
+	IEEE802154_REQUIRED_SIZE(struct ieee802154_addr_sa, hwaddr))
+
 #include <net/af_ieee802154.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
@@ -165,6 +181,27 @@ static inline void ieee802154_devaddr_to_raw(void *raw, __le64 addr)
 	memcpy(raw, &temp, IEEE802154_ADDR_LEN);
 }
 
+static inline int
+ieee802154_sockaddr_check_size(struct sockaddr_ieee802154 *daddr, int len)
+{
+	struct ieee802154_addr_sa *sa;
+
+	sa = &daddr->addr;
+	if (len < IEEE802154_MIN_NAMELEN)
+		return -EINVAL;
+	switch (sa->addr_type) {
+	case IEEE802154_ADDR_SHORT:
+		if (len < IEEE802154_NAMELEN_SHORT)
+			return -EINVAL;
+		break;
+	case IEEE802154_ADDR_LONG:
+		if (len < IEEE802154_NAMELEN_LONG)
+			return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
 static inline void ieee802154_addr_from_sa(struct ieee802154_addr *a,
 					   const struct ieee802154_addr_sa *sa)
 {
diff --git a/net/ieee802154/socket.c b/net/ieee802154/socket.c
index 9a675ba0bf0a..a92b11999e5f 100644
--- a/net/ieee802154/socket.c
+++ b/net/ieee802154/socket.c
@@ -201,8 +201,9 @@ static int raw_bind(struct sock *sk, struct sockaddr *_uaddr, int len)
 	int err = 0;
 	struct net_device *dev = NULL;
 
-	if (len < sizeof(*uaddr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(uaddr, len);
+	if (err < 0)
+		return err;
 
 	uaddr = (struct sockaddr_ieee802154 *)_uaddr;
 	if (uaddr->family != AF_IEEE802154)
@@ -498,7 +499,8 @@ static int dgram_bind(struct sock *sk, struct sockaddr *uaddr, int len)
 
 	ro->bound = 0;
 
-	if (len < sizeof(*addr))
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
 		goto out;
 
 	if (addr->family != AF_IEEE802154)
@@ -569,8 +571,9 @@ static int dgram_connect(struct sock *sk, struct sockaddr *uaddr,
 	struct dgram_sock *ro = dgram_sk(sk);
 	int err = 0;
 
-	if (len < sizeof(*addr))
-		return -EINVAL;
+	err = ieee802154_sockaddr_check_size(addr, len);
+	if (err < 0)
+		return err;
 
 	if (addr->family != AF_IEEE802154)
 		return -EINVAL;
@@ -609,6 +612,7 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	struct ieee802154_mac_cb *cb;
 	struct dgram_sock *ro = dgram_sk(sk);
 	struct ieee802154_addr dst_addr;
+	DECLARE_SOCKADDR(struct sockaddr_ieee802154*, daddr, msg->msg_name);
 	int hlen, tlen;
 	int err;
 
@@ -617,10 +621,20 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 		return -EOPNOTSUPP;
 	}
 
-	if (!ro->connected && !msg->msg_name)
-		return -EDESTADDRREQ;
-	else if (ro->connected && msg->msg_name)
-		return -EISCONN;
+	if (msg->msg_name) {
+		if (ro->connected)
+			return -EISCONN;
+		if (msg->msg_namelen < IEEE802154_MIN_NAMELEN)
+			return -EINVAL;
+		err = ieee802154_sockaddr_check_size(daddr, msg->msg_namelen);
+		if (err < 0)
+			return err;
+		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
+	} else {
+		if (!ro->connected)
+			return -EDESTADDRREQ;
+		dst_addr = ro->dst_addr;
+	}
 
 	if (!ro->bound)
 		dev = dev_getfirstbyhwtype(sock_net(sk), ARPHRD_IEEE802154);
@@ -656,16 +670,6 @@ static int dgram_sendmsg(struct sock *sk, struct msghdr *msg, size_t size)
 	cb = mac_cb_init(skb);
 	cb->type = IEEE802154_FC_TYPE_DATA;
 	cb->ackreq = ro->want_ack;
-
-	if (msg->msg_name) {
-		DECLARE_SOCKADDR(struct sockaddr_ieee802154*,
-				 daddr, msg->msg_name);
-
-		ieee802154_addr_from_sa(&dst_addr, &daddr->addr);
-	} else {
-		dst_addr = ro->dst_addr;
-	}
-
 	cb->secen = ro->secen;
 	cb->secen_override = ro->secen_override;
 	cb->seclevel = ro->seclevel;
-- 
2.35.1

[PATCH 5.4 10/38] um: Cleanup syscall_handler_t cast in syscalls_32.h

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit 61670b4d270c71219def1fbc9441debc2ac2e6e9 ]

Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/shared/sysdep/syscalls_32.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/um/shared/sysdep/syscalls_32.h b/arch/x86/um/shared/sysdep/syscalls_32.h
index 68fd2cf526fd..f6e9f84397e7 100644
--- a/arch/x86/um/shared/sysdep/syscalls_32.h
+++ b/arch/x86/um/shared/sysdep/syscalls_32.h
@@ -6,10 +6,9 @@
 #include <asm/unistd.h>
 #include <sysdep/ptrace.h>
 
-typedef long syscall_handler_t(struct pt_regs);
+typedef long syscall_handler_t(struct syscall_args);
 
 extern syscall_handler_t *sys_call_table[];
 
 #define EXECUTE_SYSCALL(syscall, regs) \
-	((long (*)(struct syscall_args)) \
-	 (*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
+	((*sys_call_table[syscall]))(SYSCALL_ARGS(&regs->regs))
-- 
2.35.1

[PATCH 5.4 11/38] um: Cleanup compiler warning in arch/x86/um/tls_32.c

[Greg Kroah-Hartman]

From: Lukas Straub <lukasstraub2@web.de>

[ Upstream commit d27fff3499671dc23a08efd01cdb8b3764a391c4 ]

arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.

Remove the checks to silence these warnings.

../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
   68 |         if (!t->arch.tls_array)
      |             ^
In file included from ../arch/x86/um/asm/processor.h:10,
                 from ../include/linux/rcupdate.h:30,
                 from ../include/linux/rculist.h:11,
                 from ../include/linux/pid.h:5,
                 from ../include/linux/sched.h:14,
                 from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
  243 |         if (!t->arch.tls_array)
      |             ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
   22 |         struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
      |                               ^~~~~~~~~

Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/um/tls_32.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/x86/um/tls_32.c b/arch/x86/um/tls_32.c
index ac8eee093f9c..66162eafd8e8 100644
--- a/arch/x86/um/tls_32.c
+++ b/arch/x86/um/tls_32.c
@@ -65,9 +65,6 @@ static int get_free_idx(struct task_struct* task)
 	struct thread_struct *t = &task->thread;
 	int idx;
 
-	if (!t->arch.tls_array)
-		return GDT_ENTRY_TLS_MIN;
-
 	for (idx = 0; idx < GDT_ENTRY_TLS_ENTRIES; idx++)
 		if (!t->arch.tls_array[idx].present)
 			return idx + GDT_ENTRY_TLS_MIN;
@@ -240,9 +237,6 @@ static int get_tls_entry(struct task_struct *task, struct user_desc *info,
 {
 	struct thread_struct *t = &task->thread;
 
-	if (!t->arch.tls_array)
-		goto clear;
-
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
-- 
2.35.1

[PATCH 5.4 12/38] arch: um: Mark the stack non-executable to fix a binutils warning

[Greg Kroah-Hartman]

From: David Gow <davidgow@google.com>

[ Upstream commit bd71558d585ac61cfd799db7f25e78dca404dd7a ]

Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.

This was fixed for x86 in commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:

/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions

Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/Makefile          | 8 ++++++++
 arch/x86/um/vdso/Makefile | 2 +-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/um/Makefile b/arch/um/Makefile
index 275f5ffdf6f0..773120be0f56 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -132,10 +132,18 @@ export LDS_ELF_FORMAT := $(ELF_FORMAT)
 # The wrappers will select whether using "malloc" or the kernel allocator.
 LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
 
+# Avoid binutils 2.39+ warnings by marking the stack non-executable and
+# ignorning warnings for the kallsyms sections.
+LDFLAGS_EXECSTACK = -z noexecstack
+ifeq ($(CONFIG_LD_IS_BFD),y)
+LDFLAGS_EXECSTACK += $(call ld-option,--no-warn-rwx-segments)
+endif
+
 LD_FLAGS_CMDLINE = $(foreach opt,$(KBUILD_LDFLAGS),-Wl,$(opt))
 
 # Used by link-vmlinux.sh which has special support for um link
 export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
+export LDFLAGS_vmlinux := $(LDFLAGS_EXECSTACK)
 
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
diff --git a/arch/x86/um/vdso/Makefile b/arch/x86/um/vdso/Makefile
index 0caddd6acb22..bec115036f87 100644
--- a/arch/x86/um/vdso/Makefile
+++ b/arch/x86/um/vdso/Makefile
@@ -62,7 +62,7 @@ quiet_cmd_vdso = VDSO    $@
 		       -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
-VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv
+VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack
 GCOV_PROFILE := n
 
 #
-- 
2.35.1

[PATCH 5.4 13/38] usb: mon: make mmapped memory read only

[Greg Kroah-Hartman]

From: Tadeusz Struk <tadeusz.struk@linaro.org>

commit a659daf63d16aa883be42f3f34ff84235c302198 upstream.

Syzbot found an issue in usbmon module, where the user space client can
corrupt the monitor's internal memory, causing the usbmon module to
crash the kernel with segfault, UAF, etc.

The reproducer mmaps the /dev/usbmon memory to user space, and
overwrites it with arbitrary data, which causes all kinds of issues.

Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set.
Also clear VM_MAYWRITE to make it impossible to change it to writable
later.

Cc: "Dmitry Vyukov" <dvyukov@google.com>
Cc: stable <stable@kernel.org>
Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon")
Suggested-by: PaX Team <pageexec@freemail.hu>	# for the VM_MAYRITE portion
Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a
Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/mon/mon_bin.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *fil
 {
 	/* don't do anything here: "fault" will set up page table entries */
 	vma->vm_ops = &mon_bin_vm_ops;
+
+	if (vma->vm_flags & VM_WRITE)
+		return -EPERM;
+
+	vma->vm_flags &= ~VM_MAYWRITE;
 	vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
 	vma->vm_private_data = filp->private_data;
 	mon_bin_vma_open(vma);

[PATCH 5.4 14/38] USB: serial: ftdi_sio: fix 300 bps rate for SIO

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 7bd7ad3c310cd6766f170927381eea0aa6f46c69 upstream.

The 300 bps rate of SIO devices has been mapped to 9600 bps since
2003... Let's fix the regression.

Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/ftdi_sio.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1320,8 +1320,7 @@ static u32 get_ftdi_divisor(struct tty_s
 		case 38400: div_value = ftdi_sio_b38400; break;
 		case 57600: div_value = ftdi_sio_b57600;  break;
 		case 115200: div_value = ftdi_sio_b115200; break;
-		} /* baud */
-		if (div_value == 0) {
+		default:
 			dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n",
 				__func__,  baud);
 			div_value = ftdi_sio_b9600;

[PATCH 5.4 15/38] mmc: core: Replace with already defined values for readability

[Greg Kroah-Hartman]

From: ChanWoo Lee <cw9316.lee@samsung.com>

commit e427266460826bea21b70f9b2bb29decfb2c2620 upstream.

SD_ROCR_S18A is already defined and is used to check the rocr value, so
let's replace with already defined values for readability.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -799,7 +799,7 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & 0x01000000)) {
+	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;

[PATCH 5.4 16/38] mmc: core: Terminate infinite loop in SD-UHS voltage switch

[Greg Kroah-Hartman]

From: Brian Norris <briannorris@chromium.org>

commit e9233917a7e53980664efbc565888163c0a33c3f upstream.

This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.

Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.

Note that SDIO learned a similar retry loop in commit 0797e5f1453b
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:

    rocr & ocr & R4_18V_PRESENT

(i.e., it doesn't have the same bug.)

This addresses a number of crash reports seen on ChromeOS that look
like the following:

    ... // lots of repeated: ...
    <4>[13142.846061] mmc1: Skipping voltage switch
    <4>[13143.406087] mmc1: Skipping voltage switch
    <4>[13143.964724] mmc1: Skipping voltage switch
    <4>[13144.526089] mmc1: Skipping voltage switch
    <4>[13145.086088] mmc1: Skipping voltage switch
    <4>[13145.645941] mmc1: Skipping voltage switch
    <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
    ...

Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/sd.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -799,7 +799,8 @@ try_again:
 	 * the CCS bit is set as well. We deliberately deviate from the spec in
 	 * regards to this, which allows UHS-I to be supported for SDSC cards.
 	 */
-	if (!mmc_host_is_spi(host) && rocr && (*rocr & SD_ROCR_S18A)) {
+	if (!mmc_host_is_spi(host) && (ocr & SD_OCR_S18R) &&
+	    rocr && (*rocr & SD_ROCR_S18A)) {
 		err = mmc_set_uhs_voltage(host, pocr);
 		if (err == -EAGAIN) {
 			retries--;

[PATCH 5.4 17/38] rpmsg: qcom: glink: replace strncpy() with strscpy_pad()

[Greg Kroah-Hartman]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

commit 766279a8f85df32345dbda03b102ca1ee3d5ddea upstream.

The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()").  This fixes W=1 warning:

  In function ‘qcom_glink_rx_close’,
    inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
  drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
   1549 |                 strncpy(chinfo.name, channel->name, sizeof(chinfo.name));

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Andrew Chernyakov <acherniakov@astralinux.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/rpmsg/qcom_glink_native.c |    2 +-
 drivers/rpmsg/qcom_smd.c          |    4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -1472,7 +1472,7 @@ static void qcom_glink_rx_close(struct q
 	cancel_work_sync(&channel->intent_work);
 
 	if (channel->rpdev) {
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 
--- a/drivers/rpmsg/qcom_smd.c
+++ b/drivers/rpmsg/qcom_smd.c
@@ -1073,7 +1073,7 @@ static int qcom_smd_create_device(struct
 
 	/* Assign public information to the rpmsg_device */
 	rpdev = &qsdev->rpdev;
-	strncpy(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
+	strscpy_pad(rpdev->id.name, channel->name, RPMSG_NAME_SIZE);
 	rpdev->src = RPMSG_ADDR_ANY;
 	rpdev->dst = RPMSG_ADDR_ANY;
 
@@ -1304,7 +1304,7 @@ static void qcom_channel_state_worker(st
 
 		spin_unlock_irqrestore(&edge->channels_lock, flags);
 
-		strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
+		strscpy_pad(chinfo.name, channel->name, sizeof(chinfo.name));
 		chinfo.src = RPMSG_ADDR_ANY;
 		chinfo.dst = RPMSG_ADDR_ANY;
 		rpmsg_unregister_device(&edge->dev, &chinfo);

[PATCH 5.4 18/38] nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 21a87d88c2253350e115029f14fe2a10a7e6c856 upstream.

If the i_mode field in inode of metadata files is corrupted on disk, it
can cause the initialization of bmap structure, which should have been
called from nilfs_read_inode_common(), not to be called.  This causes a
lockdep warning followed by a NULL pointer dereference at
nilfs_bmap_lookup_at_level().

This patch fixes these issues by adding a missing sanitiy check for the
i_mode field of metadata file's inode.

Link: https://lkml.kernel.org/r/20221002030804.29978-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2b32eb36c1a825b7a74c@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/inode.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -451,6 +451,8 @@ int nilfs_read_inode_common(struct inode
 	inode->i_atime.tv_nsec = le32_to_cpu(raw_inode->i_mtime_nsec);
 	inode->i_ctime.tv_nsec = le32_to_cpu(raw_inode->i_ctime_nsec);
 	inode->i_mtime.tv_nsec = le32_to_cpu(raw_inode->i_mtime_nsec);
+	if (nilfs_is_metadata_file_inode(inode) && !S_ISREG(inode->i_mode))
+		return -EIO; /* this inode is for metadata and corrupted */
 	if (inode->i_nlink == 0)
 		return -ESTALE; /* this inode is deleted */
 

[PATCH 5.4 19/38] nilfs2: fix leak of nilfs_root in case of writer thread creation failure

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit d0d51a97063db4704a5ef6bc978dddab1636a306 upstream.

If nilfs_attach_log_writer() failed to create a log writer thread, it
frees a data structure of the log writer without any cleanup.  After
commit e912a5b66837 ("nilfs2: use root object to get ifile"), this causes
a leak of struct nilfs_root, which started to leak an ifile metadata inode
and a kobject on that struct.

In addition, if the kernel is booted with panic_on_warn, the above
ifile metadata inode leak will cause the following panic when the
nilfs2 kernel module is removed:

  kmem_cache_destroy nilfs2_inode_cache: Slab cache still has objects when
  called from nilfs_destroy_cachep+0x16/0x3a [nilfs2]
  WARNING: CPU: 8 PID: 1464 at mm/slab_common.c:494 kmem_cache_destroy+0x138/0x140
  ...
  RIP: 0010:kmem_cache_destroy+0x138/0x140
  Code: 00 20 00 00 e8 a9 55 d8 ff e9 76 ff ff ff 48 8b 53 60 48 c7 c6 20 70 65 86 48 c7 c7 d8 69 9c 86 48 8b 4c 24 28 e8 ef 71 c7 00 <0f> 0b e9 53 ff ff ff c3 48 81 ff ff 0f 00 00 77 03 31 c0 c3 53 48
  ...
  Call Trace:
   <TASK>
   ? nilfs_palloc_freev.cold.24+0x58/0x58 [nilfs2]
   nilfs_destroy_cachep+0x16/0x3a [nilfs2]
   exit_nilfs_fs+0xa/0x1b [nilfs2]
    __x64_sys_delete_module+0x1d9/0x3a0
   ? __sanitizer_cov_trace_pc+0x1a/0x50
   ? syscall_trace_enter.isra.19+0x119/0x190
   do_syscall_64+0x34/0x80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
   ...
   </TASK>
  Kernel panic - not syncing: panic_on_warn set ...

This patch fixes these issues by calling nilfs_detach_log_writer() cleanup
function if spawning the log writer thread fails.

Link: https://lkml.kernel.org/r/20221007085226.57667-1-konishi.ryusuke@gmail.com
Fixes: e912a5b66837 ("nilfs2: use root object to get ifile")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7381dc4ad60658ca4c05@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/segment.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2786,10 +2786,9 @@ int nilfs_attach_log_writer(struct super
 	inode_attach_wb(nilfs->ns_bdev->bd_inode, NULL);
 
 	err = nilfs_segctor_start_thread(nilfs->ns_writer);
-	if (err) {
-		kfree(nilfs->ns_writer);
-		nilfs->ns_writer = NULL;
-	}
+	if (unlikely(err))
+		nilfs_detach_log_writer(sb);
+
 	return err;
 }
 

[PATCH 5.4 20/38] nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure

[Greg Kroah-Hartman]

From: Ryusuke Konishi <konishi.ryusuke@gmail.com>

commit 723ac751208f6d6540191689cfbf6c77135a7a1b upstream.

If creation or finalization of a checkpoint fails due to anomalies in the
checkpoint metadata on disk, a kernel warning is generated.

This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted
with panic_on_warn, does not panic.  A nilfs_error is appropriate here to
handle the abnormal filesystem condition.

This also replaces the detected error codes with an I/O error so that
neither of the internal error codes is returned to callers.

Link: https://lkml.kernel.org/r/20220929123330.19658-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+fbb3e0b24e8dae5a16ee@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nilfs2/segment.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -880,9 +880,11 @@ static int nilfs_segctor_create_checkpoi
 		nilfs_mdt_mark_dirty(nilfs->ns_cpfile);
 		nilfs_cpfile_put_checkpoint(
 			nilfs->ns_cpfile, nilfs->ns_cno, bh_cp);
-	} else
-		WARN_ON(err == -EINVAL || err == -ENOENT);
-
+	} else if (err == -EINVAL || err == -ENOENT) {
+		nilfs_error(sci->sc_super,
+			    "checkpoint creation failed due to metadata corruption.");
+		err = -EIO;
+	}
 	return err;
 }
 
@@ -896,7 +898,11 @@ static int nilfs_segctor_fill_in_checkpo
 	err = nilfs_cpfile_get_checkpoint(nilfs->ns_cpfile, nilfs->ns_cno, 0,
 					  &raw_cp, &bh_cp);
 	if (unlikely(err)) {
-		WARN_ON(err == -EINVAL || err == -ENOENT);
+		if (err == -EINVAL || err == -ENOENT) {
+			nilfs_error(sci->sc_super,
+				    "checkpoint finalization failed due to metadata corruption.");
+			err = -EIO;
+		}
 		goto failed_ibh;
 	}
 	raw_cp->cp_snapshot_list.ssl_next = 0;

[PATCH 5.4 21/38] ceph: dont truncate file in atomic_open

[Greg Kroah-Hartman]

From: Hu Weiwen <sehuww@mail.scut.edu.cn>

commit 7cb9994754f8a36ae9e5ec4597c5c4c2d6c03832 upstream.

Clear O_TRUNC from the flags sent in the MDS create request.

`atomic_open' is called before permission check. We should not do any
modification to the file here. The caller will do the truncation
afterward.

Fixes: 124e68e74099 ("ceph: file operations")
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[Xiubo: fixed a trivial conflict for 5.10 backport]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ceph/file.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -452,6 +452,12 @@ int ceph_atomic_open(struct inode *dir,
 	if (dentry->d_name.len > NAME_MAX)
 		return -ENAMETOOLONG;
 
+	/*
+	 * Do not truncate the file, since atomic_open is called before the
+	 * permission check. The caller will do the truncation afterward.
+	 */
+	flags &= ~O_TRUNC;
+
 	if (flags & O_CREAT) {
 		if (ceph_quota_is_max_files_exceeded(dir))
 			return -EDQUOT;
@@ -490,9 +496,7 @@ int ceph_atomic_open(struct inode *dir,
 
 	req->r_parent = dir;
 	set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
-	err = ceph_mdsc_do_request(mdsc,
-				   (flags & (O_CREAT|O_TRUNC)) ? dir : NULL,
-				   req);
+	err = ceph_mdsc_do_request(mdsc, (flags & O_CREAT) ? dir : NULL, req);
 	err = ceph_handle_snapdir(req, dentry, err);
 	if (err)
 		goto out_req;

[PATCH 5.4 22/38] random: clamp credited irq bits to maximum mixed

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit e78a802a7b4febf53f2a92842f494b01062d85a8 upstream.

Since the most that's mixed into the pool is sizeof(long)*2, don't
credit more than that many bytes of entropy.

Fixes: e3e33fc2ea7f ("random: do not use input pool from hard IRQs")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -976,7 +976,7 @@ static void mix_interrupt_randomness(str
 	local_irq_enable();
 
 	mix_pool_bytes(pool, sizeof(pool));
-	credit_init_bits(max(1u, (count & U16_MAX) / 64));
+	credit_init_bits(clamp_t(unsigned int, (count & U16_MAX) / 64, 1, sizeof(pool) * 8));
 
 	memzero_explicit(pool, sizeof(pool));
 }

[PATCH 5.4 23/38] ALSA: hda: Fix position reporting on Poulsbo

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 56e696c0f0c71b77fff921fc94b58a02f0445b2c upstream.

Hans reported that his Sony VAIO VPX11S1E showed the broken sound
behavior at the start of the stream for a couple of seconds, and it
turned out that the position_fix=1 option fixes the issue.  It implies
that the position reporting is inaccurate, and very likely hitting on
all Poulsbo devices.

The patch applies the workaround for Poulsbo generically to switch to
LPIB mode instead of the default position buffer.

Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3e8697e1-87c6-7a7b-d2e8-b21f1d2f181b@redhat.com
Link: https://lore.kernel.org/r/20221001142124.7241-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/pci/hda/hda_intel.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2532,7 +2532,8 @@ static const struct pci_device_id azx_id
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
 	/* Poulsbo */
 	{ PCI_DEVICE(0x8086, 0x811b),
-	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE },
+	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE |
+	  AZX_DCAPS_POSFIX_LPIB },
 	/* Oaktrail */
 	{ PCI_DEVICE(0x8086, 0x080a),
 	  .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_BASE },

[PATCH 5.4 24/38] efi: Correct Macmini DMI match in uefi cert quirk

[Greg Kroah-Hartman]

From: Orlando Chamberlain <redecorating@protonmail.com>

commit bab715bdaa9ebf28d99a6d1efb2704a30125e96d upstream.

It turns out Apple doesn't capitalise the "mini" in "Macmini" in DMI, which
is inconsistent with other model line names.

Correct the capitalisation of Macmini in the quirk for skipping loading
platform certs on T2 Macs.

Currently users get:

------------[ cut here ]------------
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffa30640054000
WARNING: CPU: 1 PID: 8 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x55/0xe0
Modules linked in:
CPU: 1 PID: 8 Comm: kworker/u12:0 Not tainted 5.18.14-arch1-2-t2 #1 4535eb3fc40fd08edab32a509fbf4c9bc52d111e
Hardware name: Apple Inc. Macmini8,1/Mac-7BA5B2DFE22DDD8C, BIOS 1731.120.10.0.0 (iBridge: 19.16.15071.0.0,0) 04/24/2022
Workqueue: efi_rts_wq efi_call_rts
...
---[ end trace 0000000000000000 ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list

Fixes: 155ca952c7ca ("efi: Do not import certificates from UEFI Secure Boot for T2 Macs")
Cc: stable@vger.kernel.org
Cc: Aditya Garg <gargaditya08@live.com>
Tested-by: Samuel Jiang <chyishian.jiang@gmail.com>
Signed-off-by: Orlando Chamberlain <redecorating@protonmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 security/integrity/platform_certs/load_uefi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/integrity/platform_certs/load_uefi.c
+++ b/security/integrity/platform_certs/load_uefi.c
@@ -30,7 +30,7 @@ static const struct dmi_system_id uefi_s
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir8,1") },
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir8,2") },
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacBookAir9,1") },
-	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacMini8,1") },
+	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "Macmini8,1") },
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "MacPro7,1") },
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "iMac20,1") },
 	{ UEFI_QUIRK_SKIP_CERT("Apple Inc.", "iMac20,2") },

[PATCH 5.4 25/38] scsi: stex: Properly zero out the passthrough command structure

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream.

The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage.  Switch things to be statically allocated which will fill the
unused fields with 0 automatically.

Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/stex.c      |   17 +++++++++--------
 include/scsi/scsi_cmnd.h |    2 +-
 2 files changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -668,16 +668,17 @@ stex_queuecommand_lck(struct scsi_cmnd *
 		return 0;
 	case PASSTHRU_CMD:
 		if (cmd->cmnd[1] == PASSTHRU_GET_DRVVER) {
-			struct st_drvver ver;
+			const struct st_drvver ver = {
+				.major = ST_VER_MAJOR,
+				.minor = ST_VER_MINOR,
+				.oem = ST_OEM,
+				.build = ST_BUILD_VER,
+				.signature[0] = PASSTHRU_SIGNATURE,
+				.console_id = host->max_id - 1,
+				.host_no = hba->host->host_no,
+			};
 			size_t cp_len = sizeof(ver);
 
-			ver.major = ST_VER_MAJOR;
-			ver.minor = ST_VER_MINOR;
-			ver.oem = ST_OEM;
-			ver.build = ST_BUILD_VER;
-			ver.signature[0] = PASSTHRU_SIGNATURE;
-			ver.console_id = host->max_id - 1;
-			ver.host_no = hba->host->host_no;
 			cp_len = scsi_sg_copy_from_buffer(cmd, &ver, cp_len);
 			cmd->result = sizeof(ver) == cp_len ?
 				DID_OK << 16 | COMMAND_COMPLETE << 8 :
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -204,7 +204,7 @@ static inline int scsi_get_resid(struct
 	for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
 
 static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
-					   void *buf, int buflen)
+					   const void *buf, int buflen)
 {
 	return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
 				   buf, buflen);

[PATCH 5.4 26/38] USB: serial: qcserial: add new usb-id for Dell branded EM7455

[Greg Kroah-Hartman]

From: Frank Wunderlich <frank-w@public-files.de>

commit eee48781ea199e32c1d0c4732641c494833788ca upstream.

Add support for Dell 5811e (EM7455) with USB-id 0x413c:0x81c2.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/qcserial.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -177,6 +177,7 @@ static const struct usb_device_id id_tab
 	{DEVICE_SWI(0x413c, 0x81b3)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
 	{DEVICE_SWI(0x413c, 0x81b5)},	/* Dell Wireless 5811e QDL */
 	{DEVICE_SWI(0x413c, 0x81b6)},	/* Dell Wireless 5811e QDL */
+	{DEVICE_SWI(0x413c, 0x81c2)},	/* Dell Wireless 5811e */
 	{DEVICE_SWI(0x413c, 0x81cb)},	/* Dell Wireless 5816e QDL */
 	{DEVICE_SWI(0x413c, 0x81cc)},	/* Dell Wireless 5816e */
 	{DEVICE_SWI(0x413c, 0x81cf)},   /* Dell Wireless 5819 */

[PATCH 5.4 27/38] random: restore O_NONBLOCK support

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit cd4f24ae9404fd31fc461066e57889be3b68641b upstream.

Prior to 5.6, when /dev/random was opened with O_NONBLOCK, it would
return -EAGAIN if there was no entropy. When the pools were unified in
5.6, this was lost. The post 5.6 behavior of blocking until the pool is
initialized, and ignoring O_NONBLOCK in the process, went unnoticed,
with no reports about the regression received for two and a half years.
However, eventually this indeed did break somebody's userspace.

So we restore the old behavior, by returning -EAGAIN if the pool is not
initialized. Unlike the old /dev/random, this can only occur during
early boot, after which it never blocks again.

In order to make this O_NONBLOCK behavior consistent with other
expectations, also respect users reading with preadv2(RWF_NOWAIT) and
similar.

Fixes: 30c08efec888 ("random: make /dev/random be almost like /dev/urandom")
Reported-by: Guozihua <guozihua@huawei.com>
Reported-by: Zhongguohua <zhongguohua1@huawei.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/mem.c    |    4 ++--
 drivers/char/random.c |    5 +++++
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -953,8 +953,8 @@ static const struct memdev {
 #endif
 	 [5] = { "zero", 0666, &zero_fops, 0 },
 	 [7] = { "full", 0666, &full_fops, 0 },
-	 [8] = { "random", 0666, &random_fops, 0 },
-	 [9] = { "urandom", 0666, &urandom_fops, 0 },
+	 [8] = { "random", 0666, &random_fops, FMODE_NOWAIT },
+	 [9] = { "urandom", 0666, &urandom_fops, FMODE_NOWAIT },
 #ifdef CONFIG_PRINTK
 	[11] = { "kmsg", 0644, &kmsg_fops, 0 },
 #endif
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1294,6 +1294,11 @@ static ssize_t random_read_iter(struct k
 {
 	int ret;
 
+	if (!crng_ready() &&
+	    ((kiocb->ki_flags & IOCB_NOWAIT) ||
+	     (kiocb->ki_filp->f_flags & O_NONBLOCK)))
+		return -EAGAIN;
+
 	ret = wait_for_random_bytes();
 	if (ret != 0)
 		return ret;

[PATCH 5.4 28/38] random: avoid reading two cache lines on irq randomness

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 9ee0507e896b45af6d65408c77815800bce30008 upstream.

In order to avoid reading and dirtying two cache lines on every IRQ,
move the work_struct to the bottom of the fast_pool struct. add_
interrupt_randomness() always touches .pool and .count, which are
currently split, because .mix pushes everything down. Instead, move .mix
to the bottom, so that .pool and .count are always in the first cache
line, since .mix is only accessed when the pool is full.

Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -890,10 +890,10 @@ void __init add_bootloader_randomness(co
 }
 
 struct fast_pool {
-	struct work_struct mix;
 	unsigned long pool[4];
 	unsigned long last;
 	unsigned int count;
+	struct work_struct mix;
 };
 
 static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = {

[PATCH 5.4 29/38] random: use expired timer rather than wq for mixing fast pool

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 748bc4dd9e663f23448d8ad7e58c011a67ea1eca upstream.

Previously, the fast pool was dumped into the main pool periodically in
the fast pool's hard IRQ handler. This worked fine and there weren't
problems with it, until RT came around. Since RT converts spinlocks into
sleeping locks, problems cropped up. Rather than switching to raw
spinlocks, the RT developers preferred we make the transformation from
originally doing:

    do_some_stuff()
    spin_lock()
    do_some_other_stuff()
    spin_unlock()

to doing:

    do_some_stuff()
    queue_work_on(some_other_stuff_worker)

This is an ordinary pattern done all over the kernel. However, Sherry
noticed a 10% performance regression in qperf TCP over a 40gbps
InfiniBand card. Quoting her message:

> MT27500 Family [ConnectX-3] cards:
> Infiniband device 'mlx4_0' port 1 status:
> default gid: fe80:0000:0000:0000:0010:e000:0178:9eb1
> base lid: 0x6
> sm lid: 0x1
> state: 4: ACTIVE
> phys state: 5: LinkUp
> rate: 40 Gb/sec (4X QDR)
> link_layer: InfiniBand
>
> Cards are configured with IP addresses on private subnet for IPoIB
> performance testing.
> Regression identified in this bug is in TCP latency in this stack as reported
> by qperf tcp_lat metric:
>
> We have one system listen as a qperf server:
> [root@yourQperfServer ~]# qperf
>
> Have the other system connect to qperf server as a client (in this
> case, it’s X7 server with Mellanox card):
> [root@yourQperfClient ~]# numactl -m0 -N0 qperf 20.20.20.101 -v -uu -ub --time 60 --wait_server 20 -oo msg_size:4K:1024K:*2 tcp_lat

Rather than incur the scheduling latency from queue_work_on, we can
instead switch to running on the next timer tick, on the same core. This
also batches things a bit more -- once per jiffy -- which is okay now
that mix_interrupt_randomness() can credit multiple bits at once.

Reported-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Paul Webb <paul.x.webb@oracle.com>
Cc: Sherry Yang <sherry.yang@oracle.com>
Cc: Phillip Goerl <phillip.goerl@oracle.com>
Cc: Jack Vogel <jack.vogel@oracle.com>
Cc: Nicky Veitch <nicky.veitch@oracle.com>
Cc: Colm Harrington <colm.harrington@oracle.com>
Cc: Ramanan Govindarajan <ramanan.govindarajan@oracle.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: stable@vger.kernel.org
Fixes: 58340f8e952b ("random: defer fast pool mixing to worker")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/random.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -893,17 +893,20 @@ struct fast_pool {
 	unsigned long pool[4];
 	unsigned long last;
 	unsigned int count;
-	struct work_struct mix;
+	struct timer_list mix;
 };
 
+static void mix_interrupt_randomness(struct timer_list *work);
+
 static DEFINE_PER_CPU(struct fast_pool, irq_randomness) = {
 #ifdef CONFIG_64BIT
 #define FASTMIX_PERM SIPHASH_PERMUTATION
-	.pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 }
+	.pool = { SIPHASH_CONST_0, SIPHASH_CONST_1, SIPHASH_CONST_2, SIPHASH_CONST_3 },
 #else
 #define FASTMIX_PERM HSIPHASH_PERMUTATION
-	.pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 }
+	.pool = { HSIPHASH_CONST_0, HSIPHASH_CONST_1, HSIPHASH_CONST_2, HSIPHASH_CONST_3 },
 #endif
+	.mix = __TIMER_INITIALIZER(mix_interrupt_randomness, 0)
 };
 
 /*
@@ -945,7 +948,7 @@ int __cold random_online_cpu(unsigned in
 }
 #endif
 
-static void mix_interrupt_randomness(struct work_struct *work)
+static void mix_interrupt_randomness(struct timer_list *work)
 {
 	struct fast_pool *fast_pool = container_of(work, struct fast_pool, mix);
 	/*
@@ -999,10 +1002,11 @@ void add_interrupt_randomness(int irq)
 	if (new_count < 1024 && !time_is_before_jiffies(fast_pool->last + HZ))
 		return;
 
-	if (unlikely(!fast_pool->mix.func))
-		INIT_WORK(&fast_pool->mix, mix_interrupt_randomness);
 	fast_pool->count |= MIX_INFLIGHT;
-	queue_work_on(raw_smp_processor_id(), system_highpri_wq, &fast_pool->mix);
+	if (!timer_pending(&fast_pool->mix)) {
+		fast_pool->mix.expires = jiffies;
+		add_timer_on(&fast_pool->mix, raw_smp_processor_id());
+	}
 }
 EXPORT_SYMBOL_GPL(add_interrupt_randomness);
 

[PATCH 5.4 30/38] wifi: cfg80211: fix u8 overflow in cfg80211_update_notlisted_nontrans()

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit aebe9f4639b13a1f4e9a6b42cdd2e38c617b442d upstream.

In the copy code of the elements, we do the following calculation
to reach the end of the MBSSID element:

	/* copy the IEs after MBSSID */
	cpy_len = mbssid[1] + 2;

This looks fine, however, cpy_len is a u8, the same as mbssid[1],
so the addition of two can overflow. In this case the subsequent
memcpy() will overflow the allocated buffer, since it copies 256
bytes too much due to the way the allocation and memcpy() sizes
are calculated.

Fix this by using size_t for the cpy_len variable.

This fixes CVE-2022-41674.

Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/scan.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1717,7 +1717,7 @@ cfg80211_update_notlisted_nontrans(struc
 	size_t new_ie_len;
 	struct cfg80211_bss_ies *new_ies;
 	const struct cfg80211_bss_ies *old;
-	u8 cpy_len;
+	size_t cpy_len;
 
 	lockdep_assert_held(&wiphy_to_rdev(wiphy)->bss_lock);
 

[PATCH 5.4 31/38] wifi: cfg80211/mac80211: reject bad MBSSID elements

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 8f033d2becc24aa6bfd2a5c104407963560caabc upstream.

Per spec, the maximum value for the MaxBSSID ('n') indicator is 8,
and the minimum is 1 since a multiple BSSID set with just one BSSID
doesn't make sense (the # of BSSIDs is limited by 2^n).

Limit this in the parsing in both cfg80211 and mac80211, rejecting
any elements with an invalid value.

This fixes potentially bad shifts in the processing of these inside
the cfg80211_gen_new_bssid() function later.

I found this during the investigation of CVE-2022-41674 fixed by the
previous patch.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Fixes: 78ac51f81532 ("mac80211: support multi-bssid")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mac80211/util.c |    2 ++
 net/wireless/scan.c |    2 ++
 2 files changed, 4 insertions(+)

--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1289,6 +1289,8 @@ static size_t ieee802_11_find_bssid_prof
 	for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, start, len) {
 		if (elem->datalen < 2)
 			continue;
+		if (elem->data[0] < 1 || elem->data[0] > 8)
+			continue;
 
 		for_each_element(sub, elem->data + 1, elem->datalen - 1) {
 			u8 new_bssid[ETH_ALEN];
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1582,6 +1582,8 @@ static void cfg80211_parse_mbssid_data(s
 	for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) {
 		if (elem->datalen < 4)
 			continue;
+		if (elem->data[0] < 1 || (int)elem->data[0] > 8)
+			continue;
 		for_each_element(sub, elem->data + 1, elem->datalen - 1) {
 			u8 profile_len;
 

[PATCH 5.4 32/38] wifi: cfg80211: ensure length byte is present before access

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 567e14e39e8f8c6997a1378bc3be615afca86063 upstream.

When iterating the elements here, ensure the length byte is
present before checking it to see if the entire element will
fit into the buffer.

Longer term, we should rewrite this code using the type-safe
element iteration macros that check all of this.

Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Reported-by: Soenke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/scan.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -265,7 +265,8 @@ static size_t cfg80211_gen_new_ie(const
 	tmp_old = cfg80211_find_ie(WLAN_EID_SSID, ie, ielen);
 	tmp_old = (tmp_old) ? tmp_old + tmp_old[1] + 2 : ie;
 
-	while (tmp_old + tmp_old[1] + 2 - ie <= ielen) {
+	while (tmp_old + 2 - ie <= ielen &&
+	       tmp_old + tmp_old[1] + 2 - ie <= ielen) {
 		if (tmp_old[0] == 0) {
 			tmp_old++;
 			continue;
@@ -325,7 +326,8 @@ static size_t cfg80211_gen_new_ie(const
 	 * copied to new ie, skip ssid, capability, bssid-index ie
 	 */
 	tmp_new = sub_copy;
-	while (tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) {
+	while (tmp_new + 2 - sub_copy <= subie_len &&
+	       tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) {
 		if (!(tmp_new[0] == WLAN_EID_NON_TX_BSSID_CAP ||
 		      tmp_new[0] == WLAN_EID_SSID)) {
 			memcpy(pos, tmp_new, tmp_new[1] + 2);

[PATCH 5.4 33/38] wifi: cfg80211: fix BSS refcounting bugs

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 0b7808818cb9df6680f98996b8e9a439fa7bcc2f upstream.

There are multiple refcounting bugs related to multi-BSSID:
 - In bss_ref_get(), if the BSS has a hidden_beacon_bss, then
   the bss pointer is overwritten before checking for the
   transmitted BSS, which is clearly wrong. Fix this by using
   the bss_from_pub() macro.

 - In cfg80211_bss_update() we copy the transmitted_bss pointer
   from tmp into new, but then if we release new, we'll unref
   it erroneously. We already set the pointer and ref it, but
   need to NULL it since it was copied from the tmp data.

 - In cfg80211_inform_single_bss_data(), if adding to the non-
   transmitted list fails, we unlink the BSS and yet still we
   return it, but this results in returning an entry without
   a reference. We shouldn't return it anyway if it was broken
   enough to not get added there.

This fixes CVE-2022-42720.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: a3584f56de1c ("cfg80211: Properly track transmitting and non-transmitting BSS")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/scan.c |   27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -104,18 +104,12 @@ static inline void bss_ref_get(struct cf
 	lockdep_assert_held(&rdev->bss_lock);
 
 	bss->refcount++;
-	if (bss->pub.hidden_beacon_bss) {
-		bss = container_of(bss->pub.hidden_beacon_bss,
-				   struct cfg80211_internal_bss,
-				   pub);
-		bss->refcount++;
-	}
-	if (bss->pub.transmitted_bss) {
-		bss = container_of(bss->pub.transmitted_bss,
-				   struct cfg80211_internal_bss,
-				   pub);
-		bss->refcount++;
-	}
+
+	if (bss->pub.hidden_beacon_bss)
+		bss_from_pub(bss->pub.hidden_beacon_bss)->refcount++;
+
+	if (bss->pub.transmitted_bss)
+		bss_from_pub(bss->pub.transmitted_bss)->refcount++;
 }
 
 static inline void bss_ref_put(struct cfg80211_registered_device *rdev,
@@ -1233,6 +1227,8 @@ cfg80211_bss_update(struct cfg80211_regi
 		new->refcount = 1;
 		INIT_LIST_HEAD(&new->hidden_list);
 		INIT_LIST_HEAD(&new->pub.nontrans_list);
+		/* we'll set this later if it was non-NULL */
+		new->pub.transmitted_bss = NULL;
 
 		if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
 			hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN);
@@ -1462,10 +1458,15 @@ cfg80211_inform_single_bss_data(struct w
 		spin_lock_bh(&rdev->bss_lock);
 		if (cfg80211_add_nontrans_list(non_tx_data->tx_bss,
 					       &res->pub)) {
-			if (__cfg80211_unlink_bss(rdev, res))
+			if (__cfg80211_unlink_bss(rdev, res)) {
 				rdev->bss_generation++;
+				res = NULL;
+			}
 		}
 		spin_unlock_bh(&rdev->bss_lock);
+
+		if (!res)
+			return NULL;
 	}
 
 	trace_cfg80211_return_bss(&res->pub);

[PATCH 5.4 34/38] wifi: cfg80211: avoid nontransmitted BSS list corruption

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit bcca852027e5878aec911a347407ecc88d6fff7f upstream.

If a non-transmitted BSS shares enough information (both
SSID and BSSID!) with another non-transmitted BSS of a
different AP, then we can find and update it, and then
try to add it to the non-transmitted BSS list. We do a
search for it on the transmitted BSS, but if it's not
there (but belongs to another transmitted BSS), the list
gets corrupted.

Since this is an erroneous situation, simply fail the
list insertion in this case and free the non-transmitted
BSS.

This fixes CVE-2022-42721.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/scan.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -386,6 +386,15 @@ cfg80211_add_nontrans_list(struct cfg802
 
 	rcu_read_unlock();
 
+	/*
+	 * This is a bit weird - it's not on the list, but already on another
+	 * one! The only way that could happen is if there's some BSSID/SSID
+	 * shared by multiple APs in their multi-BSSID profiles, potentially
+	 * with hidden SSID mixed in ... ignore it.
+	 */
+	if (!list_empty(&nontrans_bss->nontrans_list))
+		return -EINVAL;
+
 	/* add to the list */
 	list_add_tail(&nontrans_bss->nontrans_list, &trans_bss->nontrans_list);
 	return 0;

[PATCH 5.4 35/38] wifi: mac80211_hwsim: avoid mac80211 warning on bad rate

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit 1833b6f46d7e2830251a063935ab464256defe22 upstream.

If the tool on the other side (e.g. wmediumd) gets confused
about the rate, we hit a warning in mac80211. Silence that
by effectively duplicating the check here and dropping the
frame silently (in mac80211 it's dropped with the warning).

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mac80211_hwsim.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -3411,6 +3411,8 @@ static int hwsim_cloned_frame_received_n
 
 	rx_status.band = data2->channel->band;
 	rx_status.rate_idx = nla_get_u32(info->attrs[HWSIM_ATTR_RX_RATE]);
+	if (rx_status.rate_idx >= data2->hw->wiphy->bands[rx_status.band]->n_bitrates)
+		goto out;
 	rx_status.signal = nla_get_u32(info->attrs[HWSIM_ATTR_SIGNAL]);
 
 	hdr = (void *)skb->data;

[PATCH 5.4 36/38] wifi: cfg80211: update hidden BSSes to avoid WARN_ON

[Greg Kroah-Hartman]

From: Johannes Berg <johannes.berg@intel.com>

commit c90b93b5b782891ebfda49d4e5da36632fefd5d1 upstream.

When updating beacon elements in a non-transmitted BSS,
also update the hidden sub-entries to the same beacon
elements, so that a future update through other paths
won't trigger a WARN_ON().

The warning is triggered because the beacon elements in
the hidden BSSes that are children of the BSS should
always be the same as in the parent.

Reported-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/wireless/scan.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1099,6 +1099,23 @@ struct cfg80211_non_tx_bss {
 	u8 bssid_index;
 };
 
+static void cfg80211_update_hidden_bsses(struct cfg80211_internal_bss *known,
+					 const struct cfg80211_bss_ies *new_ies,
+					 const struct cfg80211_bss_ies *old_ies)
+{
+	struct cfg80211_internal_bss *bss;
+
+	/* Assign beacon IEs to all sub entries */
+	list_for_each_entry(bss, &known->hidden_list, hidden_list) {
+		const struct cfg80211_bss_ies *ies;
+
+		ies = rcu_access_pointer(bss->pub.beacon_ies);
+		WARN_ON(ies != old_ies);
+
+		rcu_assign_pointer(bss->pub.beacon_ies, new_ies);
+	}
+}
+
 static bool
 cfg80211_update_known_bss(struct cfg80211_registered_device *rdev,
 			  struct cfg80211_internal_bss *known,
@@ -1122,7 +1139,6 @@ cfg80211_update_known_bss(struct cfg8021
 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);
 	} else if (rcu_access_pointer(new->pub.beacon_ies)) {
 		const struct cfg80211_bss_ies *old;
-		struct cfg80211_internal_bss *bss;
 
 		if (known->pub.hidden_beacon_bss &&
 		    !list_empty(&known->hidden_list)) {
@@ -1150,16 +1166,7 @@ cfg80211_update_known_bss(struct cfg8021
 		if (old == rcu_access_pointer(known->pub.ies))
 			rcu_assign_pointer(known->pub.ies, new->pub.beacon_ies);
 
-		/* Assign beacon IEs to all sub entries */
-		list_for_each_entry(bss, &known->hidden_list, hidden_list) {
-			const struct cfg80211_bss_ies *ies;
-
-			ies = rcu_access_pointer(bss->pub.beacon_ies);
-			WARN_ON(ies != old);
-
-			rcu_assign_pointer(bss->pub.beacon_ies,
-					   new->pub.beacon_ies);
-		}
+		cfg80211_update_hidden_bsses(known, new->pub.beacon_ies, old);
 
 		if (old)
 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);
@@ -1798,6 +1805,8 @@ cfg80211_update_notlisted_nontrans(struc
 	} else {
 		old = rcu_access_pointer(nontrans_bss->beacon_ies);
 		rcu_assign_pointer(nontrans_bss->beacon_ies, new_ies);
+		cfg80211_update_hidden_bsses(bss_from_pub(nontrans_bss),
+					     new_ies, old);
 		rcu_assign_pointer(nontrans_bss->ies, new_ies);
 		if (old)
 			kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);

[PATCH 5.4 37/38] Input: xpad - add supported devices as contributed on github

[Greg Kroah-Hartman]

From: Pavel Rojtberg <rojtberg@gmail.com>

commit b382c5e37344883dc97525d05f1f6b788f549985 upstream.

This is based on multiple commits at https://github.com/paroj/xpad

Cc: stable@vger.kernel.org
Signed-off-by: Jasper Poppe <jgpoppe@gmail.com>
Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz>
Signed-off-by: Ruineka <ruinairas1992@gmail.com>
Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com>
Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -112,6 +112,8 @@ static const struct xpad_device {
 	u8 xtype;
 } xpad_device[] = {
 	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
+	{ 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
+	{ 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -242,6 +244,7 @@ static const struct xpad_device {
 	{ 0x0f0d, 0x0063, "Hori Real Arcade Pro Hayabusa (USA) Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
@@ -258,6 +261,7 @@ static const struct xpad_device {
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 },
 	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 },
+	{ 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE },
@@ -322,6 +326,7 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5502, "Hori Fighting Stick VX Alt", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5503, "Hori Fighting Edge", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5506, "Hori SOULCALIBUR V Stick", 0, XTYPE_XBOX360 },
+	{ 0x24c6, 0x5510, "Hori Fighting Commander ONE (Xbox 360/PC Mode)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x550d, "Hori GEM Xbox controller", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x550e, "Hori Real Arcade Pro V Kai 360", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x24c6, 0x551a, "PowerA FUSION Pro Controller", 0, XTYPE_XBOXONE },
@@ -331,6 +336,14 @@ static const struct xpad_device {
 	{ 0x24c6, 0x5b03, "Thrustmaster Ferrari 458 Racing Wheel", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0x5d04, "Razer Sabertooth", 0, XTYPE_XBOX360 },
 	{ 0x24c6, 0xfafe, "Rock Candy Gamepad for Xbox 360", 0, XTYPE_XBOX360 },
+	{ 0x2563, 0x058d, "OneXPlayer Gamepad", 0, XTYPE_XBOX360 },
+	{ 0x2dc8, 0x2000, "8BitDo Pro 2 Wired Controller fox Xbox", 0, XTYPE_XBOXONE },
+	{ 0x31e3, 0x1100, "Wooting One", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },
 	{ 0x3767, 0x0101, "Fanatec Speedster 3 Forceshock Wheel", 0, XTYPE_XBOX },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
@@ -416,6 +429,7 @@ static const signed short xpad_abs_trigg
 static const struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
 	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 Controller */
+	XPAD_XBOX360_VENDOR(0x03eb),		/* Wooting Keyboards (Legacy) */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
@@ -426,6 +440,7 @@ static const struct usb_device_id xpad_t
 	{ USB_DEVICE(0x0738, 0x4540) },		/* Mad Catz Beat Pad */
 	XPAD_XBOXONE_VENDOR(0x0738),		/* Mad Catz FightStick TE 2 */
 	XPAD_XBOX360_VENDOR(0x07ff),		/* Mad Catz GamePad */
+	XPAD_XBOX360_VENDOR(0x0c12),		/* Zeroplus X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x0e6f),		/* 0x0e6f X-Box One controllers */
 	XPAD_XBOX360_VENDOR(0x0f0d),		/* Hori Controllers */
@@ -446,8 +461,12 @@ static const struct usb_device_id xpad_t
 	XPAD_XBOXONE_VENDOR(0x20d6),		/* PowerA Controllers */
 	XPAD_XBOX360_VENDOR(0x24c6),		/* PowerA Controllers */
 	XPAD_XBOXONE_VENDOR(0x24c6),		/* PowerA Controllers */
+	XPAD_XBOX360_VENDOR(0x2563),		/* OneXPlayer Gamepad */
+	XPAD_XBOX360_VENDOR(0x260d),		/* Dareu H101 */
+	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke X-Box One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir Controllers */
+	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
 };

[PATCH 5.4 38/38] Input: xpad - fix wireless 360 controller breaking after suspend

[Greg Kroah-Hartman]

From: Cameron Gutman <aicommander@gmail.com>

commit a17b9841152e7f4621619902b347e2cc39c32996 upstream.

Suspending and resuming the system can sometimes cause the out
URB to get hung after a reset_resume. This causes LED setting
and force feedback to break on resume. To avoid this, just drop
the reset_resume callback so the USB core rebinds xpad to the
wireless pads on resume if a reset happened.

A nice side effect of this change is the LED ring on wireless
controllers is now set correctly on system resume.

Cc: stable@vger.kernel.org
Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume")
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/joystick/xpad.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -1983,7 +1983,6 @@ static struct usb_driver xpad_driver = {
 	.disconnect	= xpad_disconnect,
 	.suspend	= xpad_suspend,
 	.resume		= xpad_resume,
-	.reset_resume	= xpad_resume,
 	.id_table	= xpad_table,
 };
 

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[Florian Fainelli]

On 10/13/22 10:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.218-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on 
BMIPS_GENERIC:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[Naresh Kamboju]

On Thu, 13 Oct 2022 at 23:23, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.218-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.4.218-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.4.y
* git commit: 34b618a713e70b364e2d7e784cfb1a79c36bddc7
* git describe: v5.4.217-39-g34b618a713e7
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y/build/v5.4.217-39-g34b618a713e7

## No Test Regressions (compared to v5.4.217)

## No Metric Regressions (compared to v5.4.217)

## No Test Fixes (compared to v5.4.217)

## No Metric Fixes (compared to v5.4.217)

## Test result summary
total: 72725, pass: 63087, fail: 850, skip: 8400, xfail: 388

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 334 total, 334 passed, 0 failed
* arm64: 64 total, 59 passed, 5 failed
* i386: 31 total, 29 passed, 2 failed
* mips: 56 total, 56 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 63 total, 63 passed, 0 failed
* riscv: 27 total, 26 passed, 1 failed
* s390: 15 total, 15 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 57 total, 55 passed, 2 failed

## Test suites summary
* fwts
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-drivers-dma-buf
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-net-forwarding
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[Sudip Mukherjee (Codethink)]

Hi Greg,

On Thu, Oct 13, 2022 at 07:52:01PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.

Build test (gcc version 11.3.1 20220925):
mips: 65 configs -> no failure
arm: 106 configs -> no failure
arm64: 2 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure


Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]

[1]. https://openqa.qa.codethink.co.uk/tests/1987


Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>

-- 
Regards
Sudip

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[Shuah Khan]

On 10/13/22 11:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.218-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[Guenter Roeck]

On Thu, Oct 13, 2022 at 07:52:01PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 161 pass: 161 fail: 0
Qemu test results:
	total: 447 pass: 447 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.4 00/38] 5.4.218-rc1 review

[zhouzhixiu]

On 2022/10/14 1:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.218 release.
> There are 38 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 15 Oct 2022 17:51:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.218-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
> -------------
Tested on arm64 and x86 for 5.4.218-rc1,

Kernel 
repo:https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.4.y
Version: 5.4.218-rc1
Commit: 72c6935a2da6775f61b0345fddc80d0a37c66a4f
Compiler: gcc version 7.3.0 (GCC)

arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9017
passed: 9017
failed: 0
timeout: 0
--------------------------------------------------------------------

x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9017
passed: 9017
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>