[PATCH v3 00/12] drm/msm: Add SC8280XP support

[PATCH v3 00/12] drm/msm: Add SC8280XP support

[Bjorn Andersson]

This introduces support for the SC8280XP platform in the MDSS, DPU and
DP driver. It reworks the HDP handling in the DP driver to support
external HPD sources - such as the dp-connector, or USB Type-C altmode.

It then introduces the display clock controllers, mdss, dpu and
displayport controllers and link everything together, for both the MDSS
instances on the platform, and lastly enables EDP on the compute
reference device and 6 of the MiniDP outputs on the automotive
development platform.


The patches was previously sent separately, but submitting them together
here as they (except dts addition) goes in the same tree.

Bjorn Andersson (12):
  dt-bindings: display/msm: Add binding for SC8280XP MDSS
  drm/msm/dpu: Introduce SC8280XP
  dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles
  drm/msm/dp: Stop using DP id as index in desc
  drm/msm/dp: Add DP and EDP compatibles for SC8280XP
  drm/msm/dp: Add SDM845 DisplayPort instance
  drm/msm/dp: Implement hpd_notify()
  drm/msm/dp: Don't enable HPD interrupts for edp
  drm/msm/dp: HPD handling relates to next_bridge
  arm64: dts: qcom: sc8280xp: Define some of the display blocks
  arm64: dts: qcom: sc8280xp-crd: Enable EDP
  arm64: dts: qcom: sa8295-adp: Enable DP instances

 .../bindings/display/msm/dp-controller.yaml   |   3 +
 .../bindings/display/msm/dpu-sc8280xp.yaml    | 287 ++++++
 arch/arm64/boot/dts/qcom/sa8295p-adp.dts      | 244 ++++-
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts     |  49 +-
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 838 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 217 +++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c |  18 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/dp/dp_display.c           | 135 +--
 drivers/gpu/drm/msm/dp/dp_drm.c               |   1 +
 drivers/gpu/drm/msm/dp/dp_drm.h               |   2 +
 drivers/gpu/drm/msm/msm_drv.h                 |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   2 +
 16 files changed, 1747 insertions(+), 57 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml

-- 
2.37.3

[PATCH v3 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add binding for the display subsystem and display processing unit in the
Qualcomm SC8280XP platform.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- Cleaned up description and interconnect definitions
- Added opp-table

 .../bindings/display/msm/dpu-sc8280xp.yaml    | 287 ++++++++++++++++++
 1 file changed, 287 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml

diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
new file mode 100644
index 000000000000..24e7a1562fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
@@ -0,0 +1,287 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Processing Unit for SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-mdss
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+
+  ranges: true
+
+  interconnects:
+    items:
+      - description: Interconnect path for first data bus
+      - description: Interconnect path for second data bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    description: Node containing the properties of DPU.
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: qcom,sc8280xp-dpu
+
+      reg:
+        items:
+          - description: Address offset and size for mdp register set
+          - description: Address offset and size for vbif register set
+
+      reg-names:
+        items:
+          - const: mdp
+          - const: vbif
+
+      clocks:
+        items:
+          - description: Display hf axi clock
+          - description: Display sf axi clock
+          - description: Display ahb clock
+          - description: Display lut clock
+          - description: Display core clock
+          - description: Display vsync clock
+
+      clock-names:
+        items:
+          - const: bus
+          - const: nrt_bus
+          - const: iface
+          - const: lut
+          - const: core
+          - const: vsync
+
+      interrupts:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      operating-points-v2: true
+      opp-table:
+        type: object
+
+      ports:
+        $ref: /schemas/graph.yaml#/properties/ports
+        description: |
+          Contains the list of output ports from DPU device. These ports
+          connect to interfaces that are external to the DPU hardware,
+          such as DSI, DP etc. Each output port contains an endpoint that
+          describes how it is connected to an external interface.
+
+        patternProperties:
+          '^port@[0-8]$':
+            $ref: /schemas/graph.yaml#/properties/port
+            description: DPU interfaces
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - clocks
+      - interrupts
+      - power-domains
+      - operating-points-v2
+      - ports
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+      compatible = "qcom,sc8280xp-mdss";
+      reg = <0x0ae00000 0x1000>;
+      reg-names = "mdss";
+
+      power-domains = <&dispcc0 MDSS_GDSC>;
+
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+               <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+      clock-names = "iface",
+                    "ahb",
+                    "core";
+
+      assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+      assigned-clock-rates = <460000000>;
+
+      resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                      <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+      interconnect-names = "mdp0-mem", "mdp1-mem";
+
+      iommus = <&apps_smmu 0x1000 0x402>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      display-controller@ae01000 {
+        compatible = "qcom,sc8280xp-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                          <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <460000000>,
+                               <19200000>;
+
+        operating-points-v2 = <&mdss0_mdp_opp_table>;
+        power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+        interrupt-parent = <&mdss0>;
+        interrupts = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+              endpoint {
+                remote-endpoint = <&mdss0_dp0_in>;
+              };
+          };
+
+          port@4 {
+            reg = <4>;
+            endpoint {
+              remote-endpoint = <&mdss0_dp1_in>;
+            };
+          };
+
+          port@5 {
+            reg = <5>;
+              endpoint {
+                remote-endpoint = <&mdss0_dp3_in>;
+              };
+          };
+
+          port@6 {
+            reg = <6>;
+              endpoint {
+                remote-endpoint = <&mdss0_dp2_in>;
+              };
+          };
+        };
+
+        mdss0_mdp_opp_table: opp-table {
+          compatible = "operating-points-v2";
+
+          opp-200000000 {
+            opp-hz = /bits/ 64 <200000000>;
+            required-opps = <&rpmhpd_opp_low_svs>;
+          };
+
+          opp-300000000 {
+            opp-hz = /bits/ 64 <300000000>;
+            required-opps = <&rpmhpd_opp_svs>;
+          };
+
+          opp-345000000 {
+            opp-hz = /bits/ 64 <345000000>;
+            required-opps = <&rpmhpd_opp_svs_l1>;
+          };
+
+          opp-460000000 {
+            opp-hz = /bits/ 64 <460000000>;
+            required-opps = <&rpmhpd_opp_nom>;
+          };
+        };
+      };
+    };
+...
+
-- 
2.37.3

Re: [PATCH v3 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS

[Rob Herring]

On Tue, 25 Oct 2022 20:26:13 -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add binding for the display subsystem and display processing unit in the
> Qualcomm SC8280XP platform.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v2:
> - Cleaned up description and interconnect definitions
> - Added opp-table
> 
>  .../bindings/display/msm/dpu-sc8280xp.yaml    | 287 ++++++++++++++++++
>  1 file changed, 287 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.example.dts:21:18: fatal error: dt-bindings/clock/qcom,dispcc-sc8280xp.h: No such file or directory
   21 |         #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1492: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v3 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS

[Rob Herring]

On Tue, Oct 25, 2022 at 08:26:13PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add binding for the display subsystem and display processing unit in the
> Qualcomm SC8280XP platform.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v2:
> - Cleaned up description and interconnect definitions
> - Added opp-table
> 
>  .../bindings/display/msm/dpu-sc8280xp.yaml    | 287 ++++++++++++++++++
>  1 file changed, 287 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml

Doesn't this need to be reworked to match Dmitry's restructuring?

> 
> diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> new file mode 100644
> index 000000000000..24e7a1562fe7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> @@ -0,0 +1,287 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/dpu-sc8280xp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Display Processing Unit for SC8280XP
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description:
> +  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
> +  sub-blocks like DPU display controller, DSI and DP interfaces etc.
> +
> +properties:
> +  compatible:
> +    const: qcom,sc8280xp-mdss
> +
> +  reg:
> +    maxItems: 1
> +
> +  reg-names:
> +    const: mdss
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Display AHB clock from gcc
> +      - description: Display AHB clock from dispcc
> +      - description: Display core clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: ahb
> +      - const: core
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +

> +  "#address-cells": true
> +
> +  "#size-cells": true

enum: [ 1, 2 ]

(Nothing else sets that)

Rob

Re: [PATCH v3 01/12] dt-bindings: display/msm: Add binding for SC8280XP MDSS

[Bjorn Andersson]

On Wed, Oct 26, 2022 at 12:54:41PM -0500, Rob Herring wrote:
> On Tue, Oct 25, 2022 at 08:26:13PM -0700, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Add binding for the display subsystem and display processing unit in the
> > Qualcomm SC8280XP platform.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> > 
> > Changes since v2:
> > - Cleaned up description and interconnect definitions
> > - Added opp-table
> > 
> >  .../bindings/display/msm/dpu-sc8280xp.yaml    | 287 ++++++++++++++++++
> >  1 file changed, 287 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> 
> Doesn't this need to be reworked to match Dmitry's restructuring?
> 

I based my patches on linux-next, missed Dmitry's in-flight series.
Seems like this should be rebased on top of his series and hope it lands
soon.

Thanks,
Bjorn

> > 
> > diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> > new file mode 100644
> > index 000000000000..24e7a1562fe7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc8280xp.yaml
> > @@ -0,0 +1,287 @@
> > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/msm/dpu-sc8280xp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Display Processing Unit for SC8280XP
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description:
> > +  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
> > +  sub-blocks like DPU display controller, DSI and DP interfaces etc.
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,sc8280xp-mdss
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  reg-names:
> > +    const: mdss
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: Display AHB clock from gcc
> > +      - description: Display AHB clock from dispcc
> > +      - description: Display core clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: iface
> > +      - const: ahb
> > +      - const: core
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> 
> > +  "#address-cells": true
> > +
> > +  "#size-cells": true
> 
> enum: [ 1, 2 ]
> 
> (Nothing else sets that)
> 
> Rob

[PATCH v3 02/12] drm/msm/dpu: Introduce SC8280XP

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
necessary definitions and describe the DPU in the SC8280XP.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Change since v2:
- Dropped flag for hole in TOP
- Wrapped some lines to make checkpatch happier

 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 217 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c |  18 ++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h |   3 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_drv.h                 |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   2 +
 8 files changed, 245 insertions(+)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
index 27f029fdc682..9964814be27a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
@@ -79,6 +79,8 @@
 
 #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
 
+#define INTF_SC8280XP_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) | BIT(DPU_DATA_HCTL_EN)
+
 #define IRQ_SDM845_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
 			 BIT(MDP_SSPP_TOP0_INTR2) | \
 			 BIT(MDP_SSPP_TOP0_HIST_INTR) | \
@@ -124,6 +126,19 @@
 			  BIT(MDP_AD4_0_INTR) | \
 			  BIT(MDP_AD4_1_INTR))
 
+#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
+			   BIT(MDP_SSPP_TOP0_INTR2) | \
+			   BIT(MDP_SSPP_TOP0_HIST_INTR) | \
+			   BIT(MDP_INTF0_7xxx_INTR) | \
+			   BIT(MDP_INTF1_7xxx_INTR) | \
+			   BIT(MDP_INTF2_7xxx_INTR) | \
+			   BIT(MDP_INTF3_7xxx_INTR) | \
+			   BIT(MDP_INTF4_7xxx_INTR) | \
+			   BIT(MDP_INTF5_7xxx_INTR) | \
+			   BIT(MDP_INTF6_7xxx_INTR) | \
+			   BIT(MDP_INTF7_7xxx_INTR) | \
+			   BIT(MDP_INTF8_7xxx_INTR))
+
 #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
 			 BIT(DPU_WB_UBWC) | \
 			 BIT(DPU_WB_YUV_CONFIG) | \
@@ -350,6 +365,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
 	.max_vdeci_exp = MAX_VERT_DECIMATION,
 };
 
+static const struct dpu_caps sc8280xp_dpu_caps = {
+	.max_mixer_width = 2560,
+	.max_mixer_blendstages = 11,
+	.qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
+	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
+	.ubwc_version = DPU_HW_UBWC_VER_40,
+	.has_src_split = true,
+	.has_dim_layer = true,
+	.has_idle_pc = true,
+	.has_3d_merge = true,
+	.max_linewidth = 5120,
+	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
+};
+
 static const struct dpu_caps sm8250_dpu_caps = {
 	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
 	.max_mixer_blendstages = 0xb,
@@ -472,6 +501,24 @@ static const struct dpu_mdp_cfg sc8180x_mdp[] = {
 	},
 };
 
+static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
+	{
+	.name = "top_0", .id = MDP_TOP,
+	.base = 0x0, .len = 0x494,
+	.features = 0,
+	.highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
+	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
+	.clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
+	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
+	},
+};
+
 static const struct dpu_mdp_cfg sm8250_mdp[] = {
 	{
 	.name = "top_0", .id = MDP_TOP,
@@ -620,6 +667,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
 	},
 };
 
+static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
+	{
+	.name = "ctl_0", .id = CTL_0,
+	.base = 0x15000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
+	},
+	{
+	.name = "ctl_1", .id = CTL_1,
+	.base = 0x16000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
+	},
+	{
+	.name = "ctl_2", .id = CTL_2,
+	.base = 0x17000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
+	},
+	{
+	.name = "ctl_3", .id = CTL_3,
+	.base = 0x18000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
+	},
+	{
+	.name = "ctl_4", .id = CTL_4,
+	.base = 0x19000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
+	},
+	{
+	.name = "ctl_5", .id = CTL_5,
+	.base = 0x1a000, .len = 0x204,
+	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
+	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
+	},
+};
+
 static const struct dpu_ctl_cfg sm8150_ctl[] = {
 	{
 	.name = "ctl_0", .id = CTL_0,
@@ -849,6 +935,34 @@ static const struct dpu_sspp_cfg sc7180_sspp[] = {
 		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
 };
 
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
+				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
+				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
+				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
+static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
+				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
+
+static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
+	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
+		 sc8280xp_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK,
+		 sc8280xp_vig_sblk_1, 4,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
+	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK,
+		 sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
+	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK,
+		 sc8280xp_vig_sblk_3, 12,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
+	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+		 sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+		 sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
+		 sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
+		 sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
+};
+
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
 				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
 static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
@@ -996,6 +1110,15 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
 		&sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
 };
 
+static const struct dpu_lm_cfg sc8280xp_lm[] = {
+	LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),
+	LM_BLK("lm_1", LM_1, 0x45000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
+	LM_BLK("lm_2", LM_2, 0x46000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
+	LM_BLK("lm_3", LM_3, 0x47000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
+	LM_BLK("lm_4", LM_4, 0x48000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
+	LM_BLK("lm_5", LM_5, 0x49000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
+};
+
 /* SM8150 */
 
 static const struct dpu_lm_cfg sm8150_lm[] = {
@@ -1154,6 +1277,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
 	PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
 };
 
+static struct dpu_pingpong_cfg sc8280xp_pp[] = {
+	PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
+	PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
+	PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
+	PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
+	PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
+	PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
+		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
+};
+
 static const struct dpu_pingpong_cfg sm8150_pp[] = {
 	PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
 			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
@@ -1205,6 +1343,12 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
 	PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
 };
 
+static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
+	MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
+	MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
+	MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
+};
+
 /*************************************************************
  * DSC sub blocks config
  *************************************************************/
@@ -1279,6 +1423,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
 	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
 };
 
+/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
+static const struct dpu_intf_cfg sc8280xp_intf[] = {
+	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
+	INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
+	INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
+	INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
+	INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
+	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
+	INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
+	INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
+	INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
+};
+
 static const struct dpu_intf_cfg qcm2290_intf[] = {
 	INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
 	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
@@ -1381,6 +1538,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
 	},
 };
 
+static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
+	.base = 0x0,
+	.version = 0x00020000,
+	.trigger_sel_off = 0x119c,
+	.xin_id = 7,
+	.clk_ctrl = DPU_CLK_CTRL_REG_DMA,
+};
+
 static const struct dpu_reg_dma_cfg sdm845_regdma = {
 	.base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
 };
@@ -1623,6 +1788,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
 	.min_llcc_ib = 800000,
 	.min_dram_ib = 800000,
 	.danger_lut_tbl = {0xf, 0xffff, 0x0},
+	.qos_lut_tbl = {
+		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
+		.entries = sc7180_qos_linear
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+		.entries = sc7180_qos_macrotile
+		},
+		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+		.entries = sc7180_qos_nrt
+		},
+		/* TODO: macrotile-qseed is different from macrotile */
+	},
+	.cdp_cfg = {
+		{.rd_enable = 1, .wr_enable = 1},
+		{.rd_enable = 1, .wr_enable = 0}
+	},
+	.clk_inefficiency_factor = 105,
+	.bw_inefficiency_factor = 120,
+};
+
+static const struct dpu_perf_cfg sc8280xp_perf_data = {
+	.max_bw_low = 13600000,
+	.max_bw_high = 18200000,
+	.min_core_ib = 2500000,
+	.min_llcc_ib = 0,
+	.min_dram_ib = 800000,
+	.danger_lut_tbl = {0xf, 0xffff, 0x0},
 	.qos_lut_tbl = {
 		{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
 		.entries = sc8180x_qos_linear
@@ -1848,6 +2040,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
 	.mdss_irqs = IRQ_SC8180X_MASK,
 };
 
+static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
+	.caps = &sc8280xp_dpu_caps,
+	.mdp_count = ARRAY_SIZE(sc8280xp_mdp),
+	.mdp = sc8280xp_mdp,
+	.ctl_count = ARRAY_SIZE(sc8280xp_ctl),
+	.ctl = sc8280xp_ctl,
+	.sspp_count = ARRAY_SIZE(sc8280xp_sspp),
+	.sspp = sc8280xp_sspp,
+	.mixer_count = ARRAY_SIZE(sc8280xp_lm),
+	.mixer = sc8280xp_lm,
+	.dspp_count = ARRAY_SIZE(sm8150_dspp),
+	.dspp = sm8150_dspp,
+	.pingpong_count = ARRAY_SIZE(sc8280xp_pp),
+	.pingpong = sc8280xp_pp,
+	.merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
+	.merge_3d = sc8280xp_merge_3d,
+	.intf_count = ARRAY_SIZE(sc8280xp_intf),
+	.intf = sc8280xp_intf,
+	.vbif_count = ARRAY_SIZE(sdm845_vbif),
+	.vbif = sdm845_vbif,
+	.perf = &sc8280xp_perf_data,
+	.mdss_irqs = IRQ_SC8280XP_MASK,
+};
+
 static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
 	.caps = &sm8250_dpu_caps,
 	.mdp_count = ARRAY_SIZE(sm8250_mdp),
@@ -1934,6 +2150,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
 	{ .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
 	{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
 	{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
+	{ .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
 };
 
 const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
index 38aa38ab1568..c4c675c40a57 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
@@ -46,6 +46,7 @@
 #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
 #define DPU_HW_VER_650	DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
 #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
+#define DPU_HW_VER_800	DPU_HW_VER(8, 0, 0) /* sc8280xp */
 
 #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
 #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
index cf1b6d84c18a..27d74c4d8a98 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
@@ -35,6 +35,9 @@
 #define MDP_INTF_3_OFF_REV_7xxx             0x37000
 #define MDP_INTF_4_OFF_REV_7xxx             0x38000
 #define MDP_INTF_5_OFF_REV_7xxx             0x39000
+#define MDP_INTF_6_OFF_REV_7xxx             0x3a000
+#define MDP_INTF_7_OFF_REV_7xxx             0x3b000
+#define MDP_INTF_8_OFF_REV_7xxx             0x3c000
 
 /**
  * struct dpu_intr_reg - array of DPU register sets
@@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
 		MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
 		MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
 	},
+	[MDP_INTF6_7xxx_INTR] = {
+		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
+		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
+		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
+	},
+	[MDP_INTF7_7xxx_INTR] = {
+		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
+		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
+		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
+	},
+	[MDP_INTF8_7xxx_INTR] = {
+		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
+		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
+		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
+	},
 };
 
 #define DPU_IRQ_REG(irq_idx)	(irq_idx / 32)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
index 46443955443c..425465011c80 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
@@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
 	MDP_INTF3_7xxx_INTR,
 	MDP_INTF4_7xxx_INTR,
 	MDP_INTF5_7xxx_INTR,
+	MDP_INTF6_7xxx_INTR,
+	MDP_INTF7_7xxx_INTR,
+	MDP_INTF8_7xxx_INTR,
 	MDP_INTR_MAX,
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
index d3b0ed0a9c6c..d595096a4b1f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
@@ -214,6 +214,8 @@ enum dpu_intf {
 	INTF_4,
 	INTF_5,
 	INTF_6,
+	INTF_7,
+	INTF_8,
 	INTF_MAX
 };
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index 5e6e2626151e..db2e4bb4e208 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -1304,6 +1304,7 @@ static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,sc7180-dpu", },
 	{ .compatible = "qcom,sc7280-dpu", },
 	{ .compatible = "qcom,sc8180x-dpu", },
+	{ .compatible = "qcom,sc8280xp-dpu", },
 	{ .compatible = "qcom,sm8150-dpu", },
 	{ .compatible = "qcom,sm8250-dpu", },
 	{}
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index b2ea262296a4..2dd342e49de6 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -61,6 +61,7 @@ enum msm_dp_controller {
 	MSM_DP_CONTROLLER_0,
 	MSM_DP_CONTROLLER_1,
 	MSM_DP_CONTROLLER_2,
+	MSM_DP_CONTROLLER_3,
 	MSM_DP_CONTROLLER_COUNT,
 };
 
diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
index e13c5c12b775..7c391fab6263 100644
--- a/drivers/gpu/drm/msm/msm_mdss.c
+++ b/drivers/gpu/drm/msm/msm_mdss.c
@@ -208,6 +208,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
 		writel_relaxed(0x420, msm_mdss->mmio + UBWC_STATIC);
 		break;
 	case DPU_HW_VER_600:
+	case DPU_HW_VER_800:
 		/* TODO: 0x102e for LP_DDR4 */
 		writel_relaxed(0x103e, msm_mdss->mmio + UBWC_STATIC);
 		writel_relaxed(2, msm_mdss->mmio + UBWC_CTRL_2);
@@ -445,6 +446,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,sc7180-mdss" },
 	{ .compatible = "qcom,sc7280-mdss" },
 	{ .compatible = "qcom,sc8180x-mdss" },
+	{ .compatible = "qcom,sc8280xp-mdss" },
 	{ .compatible = "qcom,sm8150-mdss" },
 	{ .compatible = "qcom,sm8250-mdss" },
 	{}
-- 
2.37.3

Re: [PATCH v3 02/12] drm/msm/dpu: Introduce SC8280XP

[Dmitry Baryshkov]

On 26/10/2022 06:26, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> The Qualcomm SC8280XP platform contains DPU version 8.0.0, has 9
> interfaces, 2 DSI controllers and 4 DisplayPort controllers. Extend the
> necessary definitions and describe the DPU in the SC8280XP.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Change since v2:
> - Dropped flag for hole in TOP
> - Wrapped some lines to make checkpatch happier
> 
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    | 217 ++++++++++++++++++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c |  18 ++
>   .../gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h |   3 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h   |   2 +
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
>   drivers/gpu/drm/msm/msm_drv.h                 |   1 +
>   drivers/gpu/drm/msm/msm_mdss.c                |   2 +
>   8 files changed, 245 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 27f029fdc682..9964814be27a 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -79,6 +79,8 @@
>   
>   #define INTF_SC7280_MASK INTF_SC7180_MASK | BIT(DPU_DATA_HCTL_EN)
>   
> +#define INTF_SC8280XP_MASK BIT(DPU_INTF_INPUT_CTRL) | BIT(DPU_INTF_TE) | BIT(DPU_DATA_HCTL_EN)

This is equal to INTF_SC7280_MASK

> +
>   #define IRQ_SDM845_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
>   			 BIT(MDP_SSPP_TOP0_INTR2) | \
>   			 BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> @@ -124,6 +126,19 @@
>   			  BIT(MDP_AD4_0_INTR) | \
>   			  BIT(MDP_AD4_1_INTR))
>   
> +#define IRQ_SC8280XP_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> +			   BIT(MDP_SSPP_TOP0_INTR2) | \
> +			   BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> +			   BIT(MDP_INTF0_7xxx_INTR) | \
> +			   BIT(MDP_INTF1_7xxx_INTR) | \
> +			   BIT(MDP_INTF2_7xxx_INTR) | \
> +			   BIT(MDP_INTF3_7xxx_INTR) | \
> +			   BIT(MDP_INTF4_7xxx_INTR) | \
> +			   BIT(MDP_INTF5_7xxx_INTR) | \
> +			   BIT(MDP_INTF6_7xxx_INTR) | \
> +			   BIT(MDP_INTF7_7xxx_INTR) | \
> +			   BIT(MDP_INTF8_7xxx_INTR))
> +
>   #define WB_SM8250_MASK (BIT(DPU_WB_LINE_MODE) | \
>   			 BIT(DPU_WB_UBWC) | \
>   			 BIT(DPU_WB_YUV_CONFIG) | \
> @@ -350,6 +365,20 @@ static const struct dpu_caps sc8180x_dpu_caps = {
>   	.max_vdeci_exp = MAX_VERT_DECIMATION,
>   };
>   
> +static const struct dpu_caps sc8280xp_dpu_caps = {
> +	.max_mixer_width = 2560,
> +	.max_mixer_blendstages = 11,
> +	.qseed_type = DPU_SSPP_SCALER_QSEED3LITE,
> +	.smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> +	.ubwc_version = DPU_HW_UBWC_VER_40,
> +	.has_src_split = true,
> +	.has_dim_layer = true,
> +	.has_idle_pc = true,
> +	.has_3d_merge = true,
> +	.max_linewidth = 5120,
> +	.pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> +};
> +
>   static const struct dpu_caps sm8250_dpu_caps = {
>   	.max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
>   	.max_mixer_blendstages = 0xb,
> @@ -472,6 +501,24 @@ static const struct dpu_mdp_cfg sc8180x_mdp[] = {
>   	},
>   };
>   
> +static const struct dpu_mdp_cfg sc8280xp_mdp[] = {
> +	{
> +	.name = "top_0", .id = MDP_TOP,
> +	.base = 0x0, .len = 0x494,
> +	.features = 0,
> +	.highest_bank_bit = 0x3, /* TODO: 2 for LP_DDR4 */
> +	.clk_ctrls[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR0] = { .reg_off = 0x2bc, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_CURSOR1] = { .reg_off = 0x2c4, .bit_off = 8},
> +	.clk_ctrls[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20},
> +	},
> +};
> +
>   static const struct dpu_mdp_cfg sm8250_mdp[] = {
>   	{
>   	.name = "top_0", .id = MDP_TOP,
> @@ -620,6 +667,45 @@ static const struct dpu_ctl_cfg sc7180_ctl[] = {
>   	},
>   };
>   
> +static const struct dpu_ctl_cfg sc8280xp_ctl[] = {
> +	{
> +	.name = "ctl_0", .id = CTL_0,
> +	.base = 0x15000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),

CTL_SC7280_MASK

> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9),
> +	},
> +	{
> +	.name = "ctl_1", .id = CTL_1,
> +	.base = 0x16000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> +	},
> +	{
> +	.name = "ctl_2", .id = CTL_2,
> +	.base = 0x17000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> +	},
> +	{
> +	.name = "ctl_3", .id = CTL_3,
> +	.base = 0x18000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> +	},
> +	{
> +	.name = "ctl_4", .id = CTL_4,
> +	.base = 0x19000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 13),
> +	},
> +	{
> +	.name = "ctl_5", .id = CTL_5,
> +	.base = 0x1a000, .len = 0x204,
> +	.features = BIT(DPU_CTL_ACTIVE_CFG) | BIT(DPU_CTL_FETCH_ACTIVE) | BIT(DPU_CTL_VM_CFG),
> +	.intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 23),
> +	},
> +};
> +
>   static const struct dpu_ctl_cfg sm8150_ctl[] = {
>   	{
>   	.name = "ctl_0", .id = CTL_0,
> @@ -849,6 +935,34 @@ static const struct dpu_sspp_cfg sc7180_sspp[] = {
>   		sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
>   };
>   
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_0 =
> +				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_1 =
> +				_VIG_SBLK("1", 6, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_2 =
> +				_VIG_SBLK("2", 7, DPU_SSPP_SCALER_QSEED3LITE);
> +static const struct dpu_sspp_sub_blks sc8280xp_vig_sblk_3 =
> +				_VIG_SBLK("3", 8, DPU_SSPP_SCALER_QSEED3LITE);
> +
> +static const struct dpu_sspp_cfg sc8280xp_sspp[] = {
> +	SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,

It should be either DPU_SSPP_SCALER_QSEED4 in the sblks above or 
VIG_SM8250_MASK below.

> +		 sc8280xp_vig_sblk_0, 0,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
> +	SSPP_BLK("sspp_1", SSPP_VIG1, 0x6000, VIG_SC7180_MASK,
> +		 sc8280xp_vig_sblk_1, 4,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG1),
> +	SSPP_BLK("sspp_2", SSPP_VIG2, 0x8000, VIG_SC7180_MASK,
> +		 sc8280xp_vig_sblk_2, 8, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG2),
> +	SSPP_BLK("sspp_3", SSPP_VIG3, 0xa000, VIG_SC7180_MASK,
> +		 sc8280xp_vig_sblk_3, 12,  SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG3),
> +	SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
> +		 sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
> +	SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
> +		 sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
> +	SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
> +		 sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
> +	SSPP_BLK("sspp_11", SSPP_DMA3, 0x2a000, DMA_CURSOR_SDM845_MASK,
> +		 sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
> +};
> +
>   static const struct dpu_sspp_sub_blks sm8250_vig_sblk_0 =
>   				_VIG_SBLK("0", 5, DPU_SSPP_SCALER_QSEED3LITE);
>   static const struct dpu_sspp_sub_blks sm8250_vig_sblk_1 =
> @@ -996,6 +1110,15 @@ static const struct dpu_lm_cfg sc7180_lm[] = {
>   		&sc7180_lm_sblk, PINGPONG_1, LM_0, 0),
>   };
>   
> +static const struct dpu_lm_cfg sc8280xp_lm[] = {
> +	LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_0, LM_1, DSPP_0),

Doesn't sc8280xp support DPU_MIXER_SOURCESPLIT? If it does, it should be 
MIXER_SDM845_MASK

> +	LM_BLK("lm_1", LM_1, 0x45000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_1, LM_0, DSPP_1),
> +	LM_BLK("lm_2", LM_2, 0x46000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_2, LM_3, DSPP_2),
> +	LM_BLK("lm_3", LM_3, 0x47000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_3, LM_2, DSPP_3),
> +	LM_BLK("lm_4", LM_4, 0x48000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_4, LM_5, 0),
> +	LM_BLK("lm_5", LM_5, 0x49000, MIXER_SC7180_MASK, &sdm845_lm_sblk, PINGPONG_5, LM_4, 0),
> +};
> +
>   /* SM8150 */
>   
>   static const struct dpu_lm_cfg sm8150_lm[] = {
> @@ -1154,6 +1277,21 @@ static struct dpu_pingpong_cfg sc7180_pp[] = {
>   	PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800, 0, sdm845_pp_sblk_te, -1, -1),
>   };
>   
> +static struct dpu_pingpong_cfg sc8280xp_pp[] = {
> +	PP_BLK_TE("pingpong_0", PINGPONG_0, 0x69000, MERGE_3D_0, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), -1),
> +	PP_BLK_TE("pingpong_1", PINGPONG_1, 0x6a000, MERGE_3D_0, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 9), -1),
> +	PP_BLK_TE("pingpong_2", PINGPONG_2, 0x6b000, MERGE_3D_1, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10), -1),
> +	PP_BLK_TE("pingpong_3", PINGPONG_3, 0x6c000, MERGE_3D_1, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11), -1),
> +	PP_BLK_TE("pingpong_4", PINGPONG_4, 0x6d000, MERGE_3D_2, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 30), -1),
> +	PP_BLK_TE("pingpong_5", PINGPONG_5, 0x6e000, MERGE_3D_2, sdm845_pp_sblk_te,
> +		  DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 31), -1),
> +};
> +
>   static const struct dpu_pingpong_cfg sm8150_pp[] = {
>   	PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000, MERGE_3D_0, sdm845_pp_sblk_te,
>   			DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8),
> @@ -1205,6 +1343,12 @@ static const struct dpu_pingpong_cfg sc7280_pp[] = {
>   	PP_BLK("pingpong_3", PINGPONG_3, 0x6c000, 0, sc7280_pp_sblk, -1, -1),
>   };
>   
> +static const struct dpu_merge_3d_cfg sc8280xp_merge_3d[] = {
> +	MERGE_3D_BLK("merge_3d_0", MERGE_3D_0, 0x4e000),
> +	MERGE_3D_BLK("merge_3d_1", MERGE_3D_1, 0x4f000),
> +	MERGE_3D_BLK("merge_3d_2", MERGE_3D_2, 0x50000),
> +};
> +
>   /*************************************************************
>    * DSC sub blocks config
>    *************************************************************/
> @@ -1279,6 +1423,19 @@ static const struct dpu_intf_cfg sc8180x_intf[] = {
>   	INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
>   };
>   
> +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */
> +static const struct dpu_intf_cfg sc8280xp_intf[] = {
> +	INTF_BLK("intf_0", INTF_0, 0x34000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> +	INTF_BLK("intf_1", INTF_1, 0x35000, INTF_DSI, 0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> +	INTF_BLK("intf_2", INTF_2, 0x36000, INTF_DSI, 1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> +	INTF_BLK("intf_3", INTF_3, 0x37000, INTF_NONE, MSM_DP_CONTROLLER_0, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> +	INTF_BLK("intf_4", INTF_4, 0x38000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> +	INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_3, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> +	INTF_BLK("intf_6", INTF_6, 0x3a000, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 16, 17),
> +	INTF_BLK("intf_7", INTF_7, 0x3b000, INTF_NONE, MSM_DP_CONTROLLER_2, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 18, 19),
> +	INTF_BLK("intf_8", INTF_8, 0x3c000, INTF_NONE, MSM_DP_CONTROLLER_1, 24, INTF_SC8280XP_MASK, MDP_SSPP_TOP0_INTR, 12, 13),
> +};
> +
>   static const struct dpu_intf_cfg qcm2290_intf[] = {
>   	INTF_BLK("intf_0", INTF_0, 0x00000, INTF_NONE, 0, 0, 0, 0, 0, 0),
>   	INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> @@ -1381,6 +1538,14 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
>   	},
>   };
>   
> +static const struct dpu_reg_dma_cfg sc8280xp_regdma = {
> +	.base = 0x0,
> +	.version = 0x00020000,
> +	.trigger_sel_off = 0x119c,
> +	.xin_id = 7,
> +	.clk_ctrl = DPU_CLK_CTRL_REG_DMA,
> +};
> +
>   static const struct dpu_reg_dma_cfg sdm845_regdma = {
>   	.base = 0x0, .version = 0x1, .trigger_sel_off = 0x119c
>   };
> @@ -1623,6 +1788,33 @@ static const struct dpu_perf_cfg sc8180x_perf_data = {
>   	.min_llcc_ib = 800000,
>   	.min_dram_ib = 800000,
>   	.danger_lut_tbl = {0xf, 0xffff, 0x0},
> +	.qos_lut_tbl = {
> +		{.nentry = ARRAY_SIZE(sc7180_qos_linear),
> +		.entries = sc7180_qos_linear
> +		},
> +		{.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> +		.entries = sc7180_qos_macrotile
> +		},
> +		{.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> +		.entries = sc7180_qos_nrt
> +		},
> +		/* TODO: macrotile-qseed is different from macrotile */
> +	},
> +	.cdp_cfg = {
> +		{.rd_enable = 1, .wr_enable = 1},
> +		{.rd_enable = 1, .wr_enable = 0}
> +	},
> +	.clk_inefficiency_factor = 105,
> +	.bw_inefficiency_factor = 120,
> +};
> +
> +static const struct dpu_perf_cfg sc8280xp_perf_data = {
> +	.max_bw_low = 13600000,
> +	.max_bw_high = 18200000,
> +	.min_core_ib = 2500000,
> +	.min_llcc_ib = 0,
> +	.min_dram_ib = 800000,
> +	.danger_lut_tbl = {0xf, 0xffff, 0x0},
>   	.qos_lut_tbl = {
>   		{.nentry = ARRAY_SIZE(sc8180x_qos_linear),
>   		.entries = sc8180x_qos_linear
> @@ -1848,6 +2040,30 @@ static const struct dpu_mdss_cfg sc8180x_dpu_cfg = {
>   	.mdss_irqs = IRQ_SC8180X_MASK,
>   };
>   
> +static const struct dpu_mdss_cfg sc8280xp_dpu_cfg = {
> +	.caps = &sc8280xp_dpu_caps,
> +	.mdp_count = ARRAY_SIZE(sc8280xp_mdp),
> +	.mdp = sc8280xp_mdp,
> +	.ctl_count = ARRAY_SIZE(sc8280xp_ctl),
> +	.ctl = sc8280xp_ctl,
> +	.sspp_count = ARRAY_SIZE(sc8280xp_sspp),
> +	.sspp = sc8280xp_sspp,
> +	.mixer_count = ARRAY_SIZE(sc8280xp_lm),
> +	.mixer = sc8280xp_lm,
> +	.dspp_count = ARRAY_SIZE(sm8150_dspp),
> +	.dspp = sm8150_dspp,
> +	.pingpong_count = ARRAY_SIZE(sc8280xp_pp),
> +	.pingpong = sc8280xp_pp,
> +	.merge_3d_count = ARRAY_SIZE(sc8280xp_merge_3d),
> +	.merge_3d = sc8280xp_merge_3d,
> +	.intf_count = ARRAY_SIZE(sc8280xp_intf),
> +	.intf = sc8280xp_intf,
> +	.vbif_count = ARRAY_SIZE(sdm845_vbif),
> +	.vbif = sdm845_vbif,
> +	.perf = &sc8280xp_perf_data,
> +	.mdss_irqs = IRQ_SC8280XP_MASK,
> +};
> +
>   static const struct dpu_mdss_cfg sm8250_dpu_cfg = {
>   	.caps = &sm8250_dpu_caps,
>   	.mdp_count = ARRAY_SIZE(sm8250_mdp),
> @@ -1934,6 +2150,7 @@ static const struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
>   	{ .hw_rev = DPU_HW_VER_620, .dpu_cfg = &sc7180_dpu_cfg},
>   	{ .hw_rev = DPU_HW_VER_650, .dpu_cfg = &qcm2290_dpu_cfg},
>   	{ .hw_rev = DPU_HW_VER_720, .dpu_cfg = &sc7280_dpu_cfg},
> +	{ .hw_rev = DPU_HW_VER_800, .dpu_cfg = &sc8280xp_dpu_cfg},
>   };
>   
>   const struct dpu_mdss_cfg *dpu_hw_catalog_init(u32 hw_rev)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index 38aa38ab1568..c4c675c40a57 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -46,6 +46,7 @@
>   #define DPU_HW_VER_620	DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
>   #define DPU_HW_VER_650	DPU_HW_VER(6, 5, 0) /* qcm2290|sm4125 */
>   #define DPU_HW_VER_720	DPU_HW_VER(7, 2, 0) /* sc7280 */
> +#define DPU_HW_VER_800	DPU_HW_VER(8, 0, 0) /* sc8280xp */
>   
>   #define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
>   #define IS_MSM8998_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_300)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> index cf1b6d84c18a..27d74c4d8a98 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c
> @@ -35,6 +35,9 @@
>   #define MDP_INTF_3_OFF_REV_7xxx             0x37000
>   #define MDP_INTF_4_OFF_REV_7xxx             0x38000
>   #define MDP_INTF_5_OFF_REV_7xxx             0x39000
> +#define MDP_INTF_6_OFF_REV_7xxx             0x3a000
> +#define MDP_INTF_7_OFF_REV_7xxx             0x3b000
> +#define MDP_INTF_8_OFF_REV_7xxx             0x3c000
>   
>   /**
>    * struct dpu_intr_reg - array of DPU register sets
> @@ -139,6 +142,21 @@ static const struct dpu_intr_reg dpu_intr_set[] = {
>   		MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_EN,
>   		MDP_INTF_5_OFF_REV_7xxx+INTF_INTR_STATUS
>   	},
> +	[MDP_INTF6_7xxx_INTR] = {
> +		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_CLEAR,
> +		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_EN,
> +		MDP_INTF_6_OFF_REV_7xxx+INTF_INTR_STATUS
> +	},
> +	[MDP_INTF7_7xxx_INTR] = {
> +		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_CLEAR,
> +		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_EN,
> +		MDP_INTF_7_OFF_REV_7xxx+INTF_INTR_STATUS
> +	},
> +	[MDP_INTF8_7xxx_INTR] = {
> +		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_CLEAR,
> +		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_EN,
> +		MDP_INTF_8_OFF_REV_7xxx+INTF_INTR_STATUS
> +	},
>   };
>   
>   #define DPU_IRQ_REG(irq_idx)	(irq_idx / 32)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> index 46443955443c..425465011c80 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.h
> @@ -31,6 +31,9 @@ enum dpu_hw_intr_reg {
>   	MDP_INTF3_7xxx_INTR,
>   	MDP_INTF4_7xxx_INTR,
>   	MDP_INTF5_7xxx_INTR,
> +	MDP_INTF6_7xxx_INTR,
> +	MDP_INTF7_7xxx_INTR,
> +	MDP_INTF8_7xxx_INTR,
>   	MDP_INTR_MAX,
>   };
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index d3b0ed0a9c6c..d595096a4b1f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -214,6 +214,8 @@ enum dpu_intf {
>   	INTF_4,
>   	INTF_5,
>   	INTF_6,
> +	INTF_7,
> +	INTF_8,
>   	INTF_MAX
>   };
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 5e6e2626151e..db2e4bb4e208 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1304,6 +1304,7 @@ static const struct of_device_id dpu_dt_match[] = {
>   	{ .compatible = "qcom,sc7180-dpu", },
>   	{ .compatible = "qcom,sc7280-dpu", },
>   	{ .compatible = "qcom,sc8180x-dpu", },
> +	{ .compatible = "qcom,sc8280xp-dpu", },
>   	{ .compatible = "qcom,sm8150-dpu", },
>   	{ .compatible = "qcom,sm8250-dpu", },
>   	{}
> diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
> index b2ea262296a4..2dd342e49de6 100644
> --- a/drivers/gpu/drm/msm/msm_drv.h
> +++ b/drivers/gpu/drm/msm/msm_drv.h
> @@ -61,6 +61,7 @@ enum msm_dp_controller {
>   	MSM_DP_CONTROLLER_0,
>   	MSM_DP_CONTROLLER_1,
>   	MSM_DP_CONTROLLER_2,
> +	MSM_DP_CONTROLLER_3,
>   	MSM_DP_CONTROLLER_COUNT,
>   };
>   
> diff --git a/drivers/gpu/drm/msm/msm_mdss.c b/drivers/gpu/drm/msm/msm_mdss.c
> index e13c5c12b775..7c391fab6263 100644
> --- a/drivers/gpu/drm/msm/msm_mdss.c
> +++ b/drivers/gpu/drm/msm/msm_mdss.c
> @@ -208,6 +208,7 @@ static int msm_mdss_enable(struct msm_mdss *msm_mdss)
>   		writel_relaxed(0x420, msm_mdss->mmio + UBWC_STATIC);
>   		break;
>   	case DPU_HW_VER_600:
> +	case DPU_HW_VER_800:
>   		/* TODO: 0x102e for LP_DDR4 */
>   		writel_relaxed(0x103e, msm_mdss->mmio + UBWC_STATIC);
>   		writel_relaxed(2, msm_mdss->mmio + UBWC_CTRL_2);
> @@ -445,6 +446,7 @@ static const struct of_device_id mdss_dt_match[] = {
>   	{ .compatible = "qcom,sc7180-mdss" },
>   	{ .compatible = "qcom,sc7280-mdss" },
>   	{ .compatible = "qcom,sc8180x-mdss" },
> +	{ .compatible = "qcom,sc8280xp-mdss" },
>   	{ .compatible = "qcom,sm8150-mdss" },
>   	{ .compatible = "qcom,sm8250-mdss" },
>   	{}

Please split mdss into the separate patch.

-- 
With best wishes
Dmitry

[PATCH v3 03/12] dt-bindings: msm/dp: Add SDM845 and SC8280XP compatibles

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add compatibles for the DisplayPort and Embedded DisplayPort blocks in
Qualcomm SDM845 and SC8280XP platforms.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---

Changes since v2:
- None

 .../devicetree/bindings/display/msm/dp-controller.yaml         | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index f2515af8256f..a1dc3a13e1cf 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -21,6 +21,9 @@ properties:
       - qcom,sc7280-edp
       - qcom,sc8180x-dp
       - qcom,sc8180x-edp
+      - qcom,sc8280xp-dp
+      - qcom,sc8280xp-edp
+      - qcom,sdm845-dp
       - qcom,sm8350-dp
 
   reg:
-- 
2.37.3

[PATCH v3 04/12] drm/msm/dp: Stop using DP id as index in desc

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.

By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.

While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- None

 drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
 1 file changed, 25 insertions(+), 47 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bfd0aeff3f0d..2d9bbc335786 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -122,61 +122,41 @@ struct dp_display_private {
 
 struct msm_dp_desc {
 	phys_addr_t io_start;
+	unsigned int id;
 	unsigned int connector_type;
 	bool wide_bus_en;
 };
 
-struct msm_dp_config {
-	const struct msm_dp_desc *descs;
-	size_t num_descs;
-};
-
 static const struct msm_dp_desc sc7180_dp_descs[] = {
-	[MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sc7180_dp_cfg = {
-	.descs = sc7180_dp_descs,
-	.num_descs = ARRAY_SIZE(sc7180_dp_descs),
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+	{}
 };
 
 static const struct msm_dp_desc sc7280_dp_descs[] = {
-	[MSM_DP_CONTROLLER_0] =	{ .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
-	[MSM_DP_CONTROLLER_1] =	{ .io_start = 0x0aea0000, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
-};
-
-static const struct msm_dp_config sc7280_dp_cfg = {
-	.descs = sc7280_dp_descs,
-	.num_descs = ARRAY_SIZE(sc7280_dp_descs),
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+	{}
 };
 
 static const struct msm_dp_desc sc8180x_dp_descs[] = {
-	[MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-	[MSM_DP_CONTROLLER_1] = { .io_start = 0x0ae98000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-	[MSM_DP_CONTROLLER_2] = { .io_start = 0x0ae9a000, .connector_type = DRM_MODE_CONNECTOR_eDP },
-};
-
-static const struct msm_dp_config sc8180x_dp_cfg = {
-	.descs = sc8180x_dp_descs,
-	.num_descs = ARRAY_SIZE(sc8180x_dp_descs),
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+	{ .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
+	{}
 };
 
 static const struct msm_dp_desc sm8350_dp_descs[] = {
-	[MSM_DP_CONTROLLER_0] = { .io_start = 0x0ae90000, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
-};
-
-static const struct msm_dp_config sm8350_dp_cfg = {
-	.descs = sm8350_dp_descs,
-	.num_descs = ARRAY_SIZE(sm8350_dp_descs),
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+	{}
 };
 
 static const struct of_device_id dp_dt_match[] = {
-	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_cfg },
-	{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_cfg },
-	{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_cfg },
-	{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_cfg },
-	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_cfg },
-	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_cfg },
+	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
+	{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
+	{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
+	{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
+	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
 	{}
 };
 
@@ -1262,10 +1242,9 @@ int dp_display_request_irq(struct msm_dp *dp_display)
 	return 0;
 }
 
-static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev,
-						     unsigned int *id)
+static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pdev)
 {
-	const struct msm_dp_config *cfg = of_device_get_match_data(&pdev->dev);
+	const struct msm_dp_desc *descs = of_device_get_match_data(&pdev->dev);
 	struct resource *res;
 	int i;
 
@@ -1273,11 +1252,9 @@ static const struct msm_dp_desc *dp_display_get_desc(struct platform_device *pde
 	if (!res)
 		return NULL;
 
-	for (i = 0; i < cfg->num_descs; i++) {
-		if (cfg->descs[i].io_start == res->start) {
-			*id = i;
-			return &cfg->descs[i];
-		}
+	for (i = 0; i < descs[i].io_start; i++) {
+		if (descs[i].io_start == res->start)
+			return &descs[i];
 	}
 
 	dev_err(&pdev->dev, "unknown displayport instance\n");
@@ -1299,12 +1276,13 @@ static int dp_display_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
-	desc = dp_display_get_desc(pdev, &dp->id);
+	desc = dp_display_get_desc(pdev);
 	if (!desc)
 		return -EINVAL;
 
 	dp->pdev = pdev;
 	dp->name = "drm_dp";
+	dp->id = desc->id;
 	dp->dp_display.connector_type = desc->connector_type;
 	dp->wide_bus_en = desc->wide_bus_en;
 	dp->dp_display.is_edp =
-- 
2.37.3

Re: [PATCH v3 04/12] drm/msm/dp: Stop using DP id as index in desc

[Dmitry Baryshkov]

On 26/10/2022 06:26, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> In the SC8280XP platform there are two identical MDSS instances, each
> with the same set of DisplayPort instances, at different addresses.
> 
> By not relying on the index to define the instance id it's possible to
> describe them both in the same table and hence have a single compatible.
> 
> While at it, flatten the cfg/desc structure so that the match data is
> just an array of descs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
> 
> Changes since v2:
> - None
> 
>   drivers/gpu/drm/msm/dp/dp_display.c | 72 ++++++++++-------------------
>   1 file changed, 25 insertions(+), 47 deletions(-)-- 
With best wishes
Dmitry

[PATCH v3 05/12] drm/msm/dp: Add DP and EDP compatibles for SC8280XP

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The SC8280XP platform has four DisplayPort controllers, per MDSS
instance, all with widebus support.

The first two are defined to be DisplayPort only, while the latter pair
(of each instance) can be either DisplayPort or Embedded DisplayPort.
The two sets are tied to the possible compatibels.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- None

 drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 2d9bbc335786..e4a83c2cd972 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -145,6 +145,26 @@ static const struct msm_dp_desc sc8180x_dp_descs[] = {
 	{}
 };
 
+static const struct msm_dp_desc sc8280xp_dp_descs[] = {
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{ .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_en = true },
+	{}
+};
+
+static const struct msm_dp_desc sc8280xp_edp_descs[] = {
+	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+	{ .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+	{ .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_en = true },
+	{}
+};
+
 static const struct msm_dp_desc sm8350_dp_descs[] = {
 	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
 	{}
@@ -156,6 +176,8 @@ static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc7280-edp", .data = &sc7280_dp_descs },
 	{ .compatible = "qcom,sc8180x-dp", .data = &sc8180x_dp_descs },
 	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
+	{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
+	{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
 	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
 	{}
 };
-- 
2.37.3

[PATCH v3 06/12] drm/msm/dp: Add SDM845 DisplayPort instance

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The Qualcomm SDM845 platform has a single DisplayPort controller, with
the same design as SC7180, so add support for this by reusing the SC7180
definition.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- None

 drivers/gpu/drm/msm/dp/dp_display.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index e4a83c2cd972..699f28f2251e 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -178,6 +178,7 @@ static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
 	{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
 	{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
+	{ .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
 	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
 	{}
 };
-- 
2.37.3

[PATCH v3 07/12] drm/msm/dp: Implement hpd_notify()

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The DisplayPort controller's hot-plug mechanism is based on pinmuxing a
physical signal on a GPIO pin into the controller. This is not always
possible, either because there aren't dedicated GPIOs available or
because the hot-plug signal is a virtual notification, in cases such as
USB Type-C.

For these cases, by implementing the hpd_notify() callback for the
DisplayPort controller's drm_bridge, a downstream drm_bridge
(next_bridge) can be used to track and signal the connection status
changes.

This makes it possible to use downstream drm_bridges such as
display-connector or any virtual mechanism, as long as they are
implemented as a drm_bridge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[bjorn: Drop connector->fwnode assignment and dev from struct msm_dp]
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- Fixed spelling of "on a GPIO" in commit message

 drivers/gpu/drm/msm/dp/dp_display.c | 22 ++++++++++++++++++++++
 drivers/gpu/drm/msm/dp/dp_drm.c     |  1 +
 drivers/gpu/drm/msm/dp/dp_drm.h     |  2 ++
 3 files changed, 25 insertions(+)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 699f28f2251e..a4563a0753b0 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1765,3 +1765,25 @@ void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
 	dp_display->dp_mode.h_active_low =
 		!!(dp_display->dp_mode.drm_mode.flags & DRM_MODE_FLAG_NHSYNC);
 }
+
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+			  enum drm_connector_status status)
+{
+	struct msm_dp_bridge *dp_bridge = to_dp_bridge(bridge);
+	struct msm_dp *dp_display = dp_bridge->dp_display;
+	struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display);
+
+	/* Without next_bridge interrupts are handled by the DP core directly */
+	if (!dp_display->next_bridge)
+		return;
+
+	if (!dp->core_initialized) {
+		drm_dbg_dp(dp->drm_dev, "not initialized\n");
+		return;
+	}
+
+	if (!dp_display->is_connected && status == connector_status_connected)
+		dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0);
+	else if (dp_display->is_connected && status == connector_status_disconnected)
+		dp_add_event(dp, EV_HPD_UNPLUG_INT, 0, 0);
+}
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.c b/drivers/gpu/drm/msm/dp/dp_drm.c
index 6df25f7662e7..1a02ec029fdd 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.c
+++ b/drivers/gpu/drm/msm/dp/dp_drm.c
@@ -68,6 +68,7 @@ static const struct drm_bridge_funcs dp_bridge_ops = {
 	.mode_valid   = dp_bridge_mode_valid,
 	.get_modes    = dp_bridge_get_modes,
 	.detect       = dp_bridge_detect,
+	.hpd_notify   = dp_bridge_hpd_notify,
 };
 
 struct drm_bridge *dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev,
diff --git a/drivers/gpu/drm/msm/dp/dp_drm.h b/drivers/gpu/drm/msm/dp/dp_drm.h
index 82035dbb0578..79e6b2cf2d25 100644
--- a/drivers/gpu/drm/msm/dp/dp_drm.h
+++ b/drivers/gpu/drm/msm/dp/dp_drm.h
@@ -32,5 +32,7 @@ enum drm_mode_status dp_bridge_mode_valid(struct drm_bridge *bridge,
 void dp_bridge_mode_set(struct drm_bridge *drm_bridge,
 			const struct drm_display_mode *mode,
 			const struct drm_display_mode *adjusted_mode);
+void dp_bridge_hpd_notify(struct drm_bridge *bridge,
+			  enum drm_connector_status status);
 
 #endif /* _DP_DRM_H_ */
-- 
2.37.3

[PATCH v3 08/12] drm/msm/dp: Don't enable HPD interrupts for edp

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Most instances where HPD interrupts are masked and unmasked are guareded
by the presence of an EDP panel being connected, but not all. Extend
this to cover the last few places, as HPD interrupt handling is not used
for the EDP case.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- None

 drivers/gpu/drm/msm/dp/dp_display.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index a4563a0753b0..3d365950de0f 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -610,8 +610,10 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 	}
 
 	/* enable HDP irq_hpd/replug interrupt */
-	dp_catalog_hpd_config_intr(dp->catalog,
-		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, true);
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog,
+					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+					   true);
 
 	drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
 			dp->dp_display.connector_type, state);
@@ -651,8 +653,10 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 			dp->dp_display.connector_type, state);
 
 	/* disable irq_hpd/replug interrupts */
-	dp_catalog_hpd_config_intr(dp->catalog,
-		DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK, false);
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog,
+					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
+					   false);
 
 	/* unplugged, no more irq_hpd handle */
 	dp_del_event(dp, EV_IRQ_HPD_INT);
@@ -678,7 +682,8 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	}
 
 	/* disable HPD plug interrupts */
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
 
 	/*
 	 * We don't need separate work for disconnect as
-- 
2.37.3

[PATCH v3 09/12] drm/msm/dp: HPD handling relates to next_bridge

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The DisplayPort controller's internal HPD interrupt handling is used for
cases where the HPD signal is connected to a GPIO which is pinmuxed into
the DisplayPort controller.

Most of the logic for enabling and disabling the HPD-related interrupts
is conditioned on the presence of an EDP panel, but more generically
designs that has a downstream drm_bridge (next_bridge) could use this to
handle the HPD interrupts, instead of the internal mechanism.

So replace the current is_edp-based guards with a check for the presence
of next_bridge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- None

 drivers/gpu/drm/msm/dp/dp_display.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 3d365950de0f..224ae3aa07c4 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -610,7 +610,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
 	}
 
 	/* enable HDP irq_hpd/replug interrupt */
-	if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog,
 					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
 					   true);
@@ -653,7 +653,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 			dp->dp_display.connector_type, state);
 
 	/* disable irq_hpd/replug interrupts */
-	if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog,
 					   DP_DP_IRQ_HPD_INT_MASK | DP_DP_HPD_REPLUG_INT_MASK,
 					   false);
@@ -682,7 +682,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	}
 
 	/* disable HPD plug interrupts */
-	if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
 
 	/*
@@ -701,7 +701,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	dp_display_handle_plugged_change(&dp->dp_display, false);
 
 	/* enable HDP plug interrupt to prepare for next plugin */
-	if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
 
 	drm_dbg_dp(dp->drm_dev, "After, type=%d hpd_state=%d\n",
@@ -1086,8 +1086,8 @@ static void dp_display_config_hpd(struct dp_display_private *dp)
 	dp_display_host_init(dp);
 	dp_catalog_ctrl_hpd_config(dp->catalog);
 
-	/* Enable plug and unplug interrupts only for external DisplayPort */
-	if (!dp->dp_display.is_edp)
+	/* Enable plug and unplug interrupts only if not handled by next_bridge */
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog,
 				DP_DP_HPD_PLUG_INT_MASK |
 				DP_DP_HPD_UNPLUG_INT_MASK,
@@ -1379,8 +1379,7 @@ static int dp_pm_resume(struct device *dev)
 
 	dp_catalog_ctrl_hpd_config(dp->catalog);
 
-
-	if (!dp->dp_display.is_edp)
+	if (!dp->dp_display.next_bridge)
 		dp_catalog_hpd_config_intr(dp->catalog,
 				DP_DP_HPD_PLUG_INT_MASK |
 				DP_DP_HPD_UNPLUG_INT_MASK,
-- 
2.37.3

Re: [PATCH v3 09/12] drm/msm/dp: HPD handling relates to next_bridge

[Dmitry Baryshkov]

On 26 October 2022 06:26:21 EEST, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
>From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
>The DisplayPort controller's internal HPD interrupt handling is used for
>cases where the HPD signal is connected to a GPIO which is pinmuxed into
>the DisplayPort controller.
>
>Most of the logic for enabling and disabling the HPD-related interrupts
>is conditioned on the presence of an EDP panel, but more generically
>designs that has a downstream drm_bridge (next_bridge) could use this to
>handle the HPD interrupts, instead of the internal mechanism.
>
>So replace the current is_edp-based guards with a check for the presence
>of next_bridge.

This does not sound correct. The next bridge might be a dummy bridge, not supporting the hpd. Please change this to use the enable_hpd()/disable_hpd() callbacks. This way the drm_bridge_connector framework will make sure to enable hpd handling for the bridge that is actually supposed to generate hpd events.


>
>Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
>---
>
>Changes since v2:
>- None


-- 
With best wishes
Dmitry

Re: [PATCH v3 09/12] drm/msm/dp: HPD handling relates to next_bridge

[Bjorn Andersson]

On Wed, Oct 26, 2022 at 09:08:49AM +0300, Dmitry Baryshkov wrote:
> 
> 
> On 26 October 2022 06:26:21 EEST, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
> >From: Bjorn Andersson <bjorn.andersson@linaro.org>
> >
> >The DisplayPort controller's internal HPD interrupt handling is used for
> >cases where the HPD signal is connected to a GPIO which is pinmuxed into
> >the DisplayPort controller.
> >
> >Most of the logic for enabling and disabling the HPD-related interrupts
> >is conditioned on the presence of an EDP panel, but more generically
> >designs that has a downstream drm_bridge (next_bridge) could use this to
> >handle the HPD interrupts, instead of the internal mechanism.
> >
> >So replace the current is_edp-based guards with a check for the presence
> >of next_bridge.
> 
> This does not sound correct. The next bridge might be a dummy bridge,
> not supporting the hpd.

I only considered checking for the Chrome case, where the output isn't
modelled and we have to rely on the internal HPD logic. Checking that
next_bridge is present and will deliver us hpd events sounds somewhat
reasonable.

But if I understand the code correctly, panel-edp isn't handing us hpd
events - and we still don't want the internal HPD logic to trigger. So I
presume I would need to check that this isn't a EDP controller and that
we're going to get external HPD events?

If so, clean you please give me some pointer on how to check if
next_bridge will provide us with hpd signaling or not?


PS. Which dummy bridge do you have in mind?

> Please change this to use the enable_hpd()/disable_hpd() callbacks.
> This way the drm_bridge_connector framework will make sure to enable
> hpd handling for the bridge that is actually supposed to generate hpd
> events.
> 

The drm_bridge_connector_init() call in dp_drm_connector_init() does
this for us already.

Regards,
Bjorn

> 
> >
> >Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> >Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> >---
> >
> >Changes since v2:
> >- None
> 
> 
> -- 
> With best wishes
> Dmitry

[PATCH v3 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

Define the display clock controllers, the MDSS instances, the DP phys
and connect these together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- New patch on list

 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
 1 file changed, 838 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index ed806a6e20f6..8526ed74b7be 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4,6 +4,7 @@
  * Copyright (c) 2022, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
@@ -1245,6 +1246,44 @@ usb_1_ssphy: usb3-phy@8903400 {
 			};
 		};
 
+		mdss1_dp0_phy: phy@8909a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x08909a00 0 0x19c>,
+			      <0 0x08909200 0 0xec>,
+			      <0 0x08909600 0 0xec>,
+			      <0 0x08909000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp1_phy: phy@890ca00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0890ca00 0 0x19c>,
+			      <0 0x0890c200 0 0xec>,
+			      <0 0x0890c600 0 0xec>,
+			      <0 0x0890c000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc8280xp-llcc";
 			reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
@@ -1360,6 +1399,326 @@ usb_1_dwc3: usb@a800000 {
 			};
 		};
 
+		mdss0: display-subsystem@ae00000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc0 MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1000 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss0_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdss0_mdp_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@5 {
+						reg = <5>;
+						mdss0_intf5_out: endpoint {
+							remote-endpoint = <&mdss0_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss0_intf6_out: endpoint {
+							remote-endpoint = <&mdss0_dp2_in>;
+						};
+					};
+				};
+
+				mdss0_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss0_dp2: displayport-controller@ae9a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xae9a000 0 0x200>,
+				      <0 0xae9a200 0 0x200>,
+				      <0 0xae9a400 0 0x600>,
+				      <0 0xae9b000 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <14>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+
+				phys = <&mdss0_dp2_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp2_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp2_in: endpoint {
+							remote-endpoint = <&mdss0_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp3: displayport-controller@aea0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0x600>,
+				      <0 0xaea1000 0 0x400>;
+				interrupt-parent = <&mdss0>;
+				interrupts = <15>;
+				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
+
+				phys = <&mdss0_dp3_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss0_dp3_opp_table>;
+				power-domains = <&dispcc0 MDSS_GDSC>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss0_dp3_in: endpoint {
+							remote-endpoint = <&mdss0_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss0_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss0_dp2_phy: phy@aec2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec2a00 0 0x19c>,
+			      <0 0x0aec2200 0 0xec>,
+			      <0 0x0aec2600 0 0xec>,
+			      <0 0x0aec2000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss0_dp3_phy: phy@aec5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x0aec5a00 0 0x19c>,
+			      <0 0x0aec5200 0 0xec>,
+			      <0 0x0aec5600 0 0xec>,
+			      <0 0x0aec5000 0 0x1c8>;
+
+			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc0: clock-controller@af00000 {
+			compatible = "qcom,sc8280xp-dispcc0";
+			reg = <0 0x0af00000 0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&mdss0_dp2_phy 0>,
+				 <&mdss0_dp2_phy 1>,
+				 <&mdss0_dp3_phy 0>,
+				 <&mdss0_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_nom>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
@@ -1972,6 +2331,485 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
 				qcom,remote-pid = <12>;
 			};
 		};
+
+		mdss1: display-subsystem@22000000 {
+			compatible = "qcom,sc8280xp-mdss";
+			reg = <0 0x22000000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc1 MDSS_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
+
+			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
+					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x1800 0x402>;
+
+			status = "disabled";
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			mdss1_mdp: display-controller@22001000 {
+				compatible = "qcom,sc8280xp-dpu";
+				reg = <0 0x22001000 0 0x8f000>,
+				      <0 0x220b0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					 <&gcc GCC_DISP_SF_AXI_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
+						  <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <460000000>,
+						       <19200000>;
+
+				operating-points-v2 = <&mdss1_mdp_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@4 {
+						reg = <4>;
+						mdss1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+
+					port@5 {
+						reg = <5>;
+						mdss1_intf5_out: endpoint {
+							remote-endpoint = <&mdss1_dp3_in>;
+						};
+					};
+
+					port@6 {
+						reg = <6>;
+						mdss1_intf6_out: endpoint {
+							remote-endpoint = <&mdss1_dp2_in>;
+						};
+					};
+				};
+
+				mdss1_mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-375000000 {
+						opp-hz = /bits/ 64 <375000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-500000000 {
+						opp-hz = /bits/ 64 <500000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+					opp-600000000 {
+						opp-hz = /bits/ 64 <600000000>;
+						required-opps = <&rpmhpd_opp_turbo_l1>;
+					};
+				};
+			};
+
+			mdss1_dp0: displayport-controller@22090000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22090000 0 0x200>,
+				      <0 0x22090200 0 0x200>,
+				      <0 0x22090400 0 0x600>,
+				      <0 0x22091000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp0_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&mdss1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp0_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
+			};
+
+			mdss1_dp1: displayport-controller@22098000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x22098000 0 0x200>,
+				      <0 0x22098200 0 0x200>,
+				      <0 0x22098400 0 0x600>,
+				      <0 0x22099000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&mdss1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp2: displayport-controller@2209a000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x2209a000 0 0x200>,
+				      <0 0x2209a200 0 0x200>,
+				      <0 0x2209a400 0 0x600>,
+				      <0 0x2209b000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <14>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+
+				phys = <&mdss1_dp2_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp2_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp2_in: endpoint {
+							remote-endpoint = <&mdss1_intf6_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp2_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp3: displayport-controller@220a0000 {
+				compatible = "qcom,sc8280xp-dp";
+				reg = <0 0x220a0000 0 0x200>,
+				      <0 0x220a0200 0 0x200>,
+				      <0 0x220a0400 0 0x600>,
+				      <0 0x220a1000 0 0x400>;
+				interrupt-parent = <&mdss1>;
+				interrupts = <15>;
+				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+				clock-names = "core_iface", "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface", "stream_pixel";
+
+				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
+
+				phys = <&mdss1_dp3_phy>;
+				phy-names = "dp";
+
+				#sound-dai-cells = <0>;
+
+				operating-points-v2 = <&mdss1_dp3_opp_table>;
+				power-domains = <&rpmhpd SC8280XP_CX>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss1_dp3_in: endpoint {
+							remote-endpoint = <&mdss1_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+					};
+				};
+
+				mdss1_dp3_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
+		mdss1_dp2_phy: phy@220c2a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c2a00 0 0x19c>,
+			      <0 0x220c2200 0 0xec>,
+			      <0 0x220c2600 0 0xec>,
+			      <0 0x220c2000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		mdss1_dp3_phy: phy@220c5a00 {
+			compatible = "qcom,sc8280xp-dp-phy";
+			reg = <0 0x220c5a00 0 0x19c>,
+			      <0 0x220c5200 0 0xec>,
+			      <0 0x220c5600 0 0xec>,
+			      <0 0x220c5000 0 0x1c8>;
+
+			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
+				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
+
+			power-domains = <&rpmhpd SC8280XP_MX>;
+
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		dispcc1: clock-controller@22100000 {
+			compatible = "qcom,sc8280xp-dispcc1";
+			reg = <0 0x22100000 0 0x20000>;
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <&mdss1_dp0_phy 0>,
+				 <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>,
+				 <&mdss1_dp1_phy 1>,
+				 <&mdss1_dp2_phy 0>,
+				 <&mdss1_dp2_phy 1>,
+				 <&mdss1_dp3_phy 0>,
+				 <&mdss1_dp3_phy 1>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			power-domains = <&rpmhpd SC8280XP_MMCX>;
+			required-opps = <&rpmhpd_opp_nom>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
-- 
2.37.3

Re: [PATCH v3 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Johan Hovold]

On Tue, Oct 25, 2022 at 08:26:22PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
> 
> Changes since v2:
> - New patch on list
> 
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
>  1 file changed, 838 insertions(+)

> +				mdss0_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {

Super nit: missing newline between entries (I only noticed when rebasing
the external DP support on top).

> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};

> +				mdss1_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {
> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};

Ditto.

> +				};
> +			};

Johan

Re: [PATCH v3 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Kuogee Hsieh]

On 10/25/2022 8:26 PM, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Define the display clock controllers, the MDSS instances, the DP phys
> and connect these together.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>
> Changes since v2:
> - New patch on list
>
>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 838 +++++++++++++++++++++++++
>   1 file changed, 838 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index ed806a6e20f6..8526ed74b7be 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -4,6 +4,7 @@
>    * Copyright (c) 2022, Linaro Limited
>    */
>   
> +#include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
>   #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
>   #include <dt-bindings/clock/qcom,rpmh.h>
>   #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> @@ -1245,6 +1246,44 @@ usb_1_ssphy: usb3-phy@8903400 {
>   			};
>   		};
>   
> +		mdss1_dp0_phy: phy@8909a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x08909a00 0 0x19c>,
> +			      <0 0x08909200 0 0xec>,
> +			      <0 0x08909600 0 0xec>,
> +			      <0 0x08909000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss1_dp1_phy: phy@890ca00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0890ca00 0 0x19c>,
> +			      <0 0x0890c200 0 0xec>,
> +			      <0 0x0890c600 0 0xec>,
> +			      <0 0x0890c000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>   		system-cache-controller@9200000 {
>   			compatible = "qcom,sc8280xp-llcc";
>   			reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
> @@ -1360,6 +1399,326 @@ usb_1_dwc3: usb@a800000 {
>   			};
>   		};
>   
> +		mdss0: display-subsystem@ae00000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x0ae00000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc0 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1000 0x402>;
> +
> +			status = "disabled";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss0_mdp: display-controller@ae01000 {
> +				compatible = "qcom,sc8280xp-dpu";
> +				reg = <0 0x0ae01000 0 0x8f000>,
> +				      <0 0x0aeb0000 0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					 <&gcc GCC_DISP_SF_AXI_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "bus",
> +					      "nrt_bus",
> +					      "iface",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
> +						  <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <460000000>,
> +						       <19200000>;
> +
> +				operating-points-v2 = <&mdss0_mdp_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@5 {
> +						reg = <5>;
> +						mdss0_intf5_out: endpoint {
> +							remote-endpoint = <&mdss0_dp3_in>;
> +						};
> +					};
> +
> +					port@6 {
> +						reg = <6>;
> +						mdss0_intf6_out: endpoint {
> +							remote-endpoint = <&mdss0_dp2_in>;
> +						};
> +					};
> +				};
> +
> +				mdss0_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {
> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};
> +
just curious, where are mdss0_dp0 and mdss0_dp1?. Are two dp/usb combo 
phys not going used?
> +			mdss0_dp2: displayport-controller@ae9a000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xae9a000 0 0x200>,
> +				      <0 0xae9a200 0 0x200>,
> +				      <0 0xae9a400 0 0x600>,
> +				      <0 0xae9b000 0 0x400>;
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <14>;
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
> +
> +				phys = <&mdss0_dp2_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss0_dp2_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss0_dp2_in: endpoint {
> +							remote-endpoint = <&mdss0_intf6_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp2_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss0_dp3: displayport-controller@aea0000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0xaea0000 0 0x200>,
> +				      <0 0xaea0200 0 0x200>,
> +				      <0 0xaea0400 0 0x600>,
> +				      <0 0xaea1000 0 0x400>;
> +				interrupt-parent = <&mdss0>;
> +				interrupts = <15>;
> +				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
> +					 <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
> +						  <&dispcc0 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss0_dp3_phy 0>, <&mdss0_dp3_phy 1>;
> +
> +				phys = <&mdss0_dp3_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss0_dp3_opp_table>;
> +				power-domains = <&dispcc0 MDSS_GDSC>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss0_dp3_in: endpoint {
> +							remote-endpoint = <&mdss0_intf5_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss0_dp3_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdss0_dp2_phy: phy@aec2a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0aec2a00 0 0x19c>,
> +			      <0 0x0aec2200 0 0xec>,
> +			      <0 0x0aec2600 0 0xec>,
> +			      <0 0x0aec2000 0 0x1c8>;
> +
> +			clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss0_dp3_phy: phy@aec5a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x0aec5a00 0 0x19c>,
> +			      <0 0x0aec5200 0 0xec>,
> +			      <0 0x0aec5600 0 0xec>,
> +			      <0 0x0aec5000 0 0x1c8>;
> +
> +			clocks = <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +				 <&dispcc0 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		dispcc0: clock-controller@af00000 {
> +			compatible = "qcom,sc8280xp-dispcc0";
> +			reg = <0 0x0af00000 0 0x20000>;
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <&sleep_clk>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <&mdss0_dp2_phy 0>,
> +				 <&mdss0_dp2_phy 1>,
> +				 <&mdss0_dp3_phy 0>,
> +				 <&mdss0_dp3_phy 1>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			power-domains = <&rpmhpd SC8280XP_MMCX>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +
> +			status = "disabled";
> +		};
> +
>   		pdc: interrupt-controller@b220000 {
>   			compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
>   			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> @@ -1972,6 +2331,485 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
>   				qcom,remote-pid = <12>;
>   			};
>   		};
> +
> +		mdss1: display-subsystem@22000000 {
> +			compatible = "qcom,sc8280xp-mdss";
> +			reg = <0 0x22000000 0 0x1000>;
> +			reg-names = "mdss";
> +
> +			power-domains = <&dispcc1 MDSS_GDSC>;
> +
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_MDP_CLK>;
> +			clock-names = "iface",
> +				      "ahb",
> +				      "core";
> +
> +			resets = <&dispcc1 DISP_CC_MDSS_CORE_BCR>;
> +
> +			interrupts = <GIC_SPI 865 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +
> +			interconnects = <&mmss_noc MASTER_MDP_CORE1_0 0 &mc_virt SLAVE_EBI1 0>,
> +					<&mmss_noc MASTER_MDP_CORE1_1 0 &mc_virt SLAVE_EBI1 0>;
> +			interconnect-names = "mdp0-mem", "mdp1-mem";
> +
> +			iommus = <&apps_smmu 0x1800 0x402>;
> +
> +			status = "disabled";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			mdss1_mdp: display-controller@22001000 {
> +				compatible = "qcom,sc8280xp-dpu";
> +				reg = <0 0x22001000 0 0x8f000>,
> +				      <0 0x220b0000 0 0x2008>;
> +				reg-names = "mdp", "vbif";
> +
> +				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> +					 <&gcc GCC_DISP_SF_AXI_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_MDP_LUT_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
> +				clock-names = "bus",
> +					      "nrt_bus",
> +					      "iface",
> +					      "lut",
> +					      "core",
> +					      "vsync";
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_MDP_CLK>,
> +						  <&dispcc1 DISP_CC_MDSS_VSYNC_CLK>;
> +				assigned-clock-rates = <460000000>,
> +						       <19200000>;
> +
> +				operating-points-v2 = <&mdss1_mdp_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_MMCX>;
> +
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <0>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss1_intf0_out: endpoint {
> +							remote-endpoint = <&mdss1_dp0_in>;
> +						};
> +					};
> +
> +					port@4 {
> +						reg = <4>;
> +						mdss1_intf4_out: endpoint {
> +							remote-endpoint = <&mdss1_dp1_in>;
> +						};
> +					};
> +
> +					port@5 {
> +						reg = <5>;
> +						mdss1_intf5_out: endpoint {
> +							remote-endpoint = <&mdss1_dp3_in>;
> +						};
> +					};
> +
> +					port@6 {
> +						reg = <6>;
> +						mdss1_intf6_out: endpoint {
> +							remote-endpoint = <&mdss1_dp2_in>;
> +						};
> +					};
> +				};
> +
> +				mdss1_mdp_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-200000000 {
> +						opp-hz = /bits/ 64 <200000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-300000000 {
> +						opp-hz = /bits/ 64 <300000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-375000000 {
> +						opp-hz = /bits/ 64 <375000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-500000000 {
> +						opp-hz = /bits/ 64 <500000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +					opp-600000000 {
> +						opp-hz = /bits/ 64 <600000000>;
> +						required-opps = <&rpmhpd_opp_turbo_l1>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp0: displayport-controller@22090000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x22090000 0 0x200>,
> +				      <0 0x22090200 0 0x200>,
> +				      <0 0x22090400 0 0x600>,
> +				      <0 0x22091000 0 0x400>;
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <12>;
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
> +
> +				phys = <&mdss1_dp0_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss1_dp0_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss1_dp0_in: endpoint {
> +							remote-endpoint = <&mdss1_intf0_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp0_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +
> +			};
> +
> +			mdss1_dp1: displayport-controller@22098000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x22098000 0 0x200>,
> +				      <0 0x22098200 0 0x200>,
> +				      <0 0x22098400 0 0x600>,
> +				      <0 0x22099000 0 0x400>;
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <13>;
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
> +
> +				phys = <&mdss1_dp1_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss1_dp1_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss1_dp1_in: endpoint {
> +							remote-endpoint = <&mdss1_intf4_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp1_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp2: displayport-controller@2209a000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x2209a000 0 0x200>,
> +				      <0 0x2209a200 0 0x200>,
> +				      <0 0x2209a400 0 0x600>,
> +				      <0 0x2209b000 0 0x400>;
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <14>;
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
> +
> +				phys = <&mdss1_dp2_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss1_dp2_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss1_dp2_in: endpoint {
> +							remote-endpoint = <&mdss1_intf6_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp2_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +
> +			mdss1_dp3: displayport-controller@220a0000 {
> +				compatible = "qcom,sc8280xp-dp";
> +				reg = <0 0x220a0000 0 0x200>,
> +				      <0 0x220a0200 0 0x200>,
> +				      <0 0x220a0400 0 0x600>,
> +				      <0 0x220a1000 0 0x400>;
> +				interrupt-parent = <&mdss1>;
> +				interrupts = <15>;
> +				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
> +					 <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
> +				clock-names = "core_iface", "core_aux",
> +					      "ctrl_link",
> +					      "ctrl_link_iface", "stream_pixel";
> +
> +				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
> +						  <&dispcc1 DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
> +				assigned-clock-parents = <&mdss1_dp3_phy 0>, <&mdss1_dp3_phy 1>;
> +
> +				phys = <&mdss1_dp3_phy>;
> +				phy-names = "dp";
> +
> +				#sound-dai-cells = <0>;
> +
> +				operating-points-v2 = <&mdss1_dp3_opp_table>;
> +				power-domains = <&rpmhpd SC8280XP_CX>;
> +
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						mdss1_dp3_in: endpoint {
> +							remote-endpoint = <&mdss1_intf5_out>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +
> +				mdss1_dp3_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-160000000 {
> +						opp-hz = /bits/ 64 <160000000>;
> +						required-opps = <&rpmhpd_opp_low_svs>;
> +					};
> +
> +					opp-270000000 {
> +						opp-hz = /bits/ 64 <270000000>;
> +						required-opps = <&rpmhpd_opp_svs>;
> +					};
> +
> +					opp-540000000 {
> +						opp-hz = /bits/ 64 <540000000>;
> +						required-opps = <&rpmhpd_opp_svs_l1>;
> +					};
> +
> +					opp-810000000 {
> +						opp-hz = /bits/ 64 <810000000>;
> +						required-opps = <&rpmhpd_opp_nom>;
> +					};
> +				};
> +			};
> +		};
> +
> +		mdss1_dp2_phy: phy@220c2a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x220c2a00 0 0x19c>,
> +			      <0 0x220c2200 0 0xec>,
> +			      <0 0x220c2600 0 0xec>,
> +			      <0 0x220c2000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		mdss1_dp3_phy: phy@220c5a00 {
> +			compatible = "qcom,sc8280xp-dp-phy";
> +			reg = <0 0x220c5a00 0 0x19c>,
> +			      <0 0x220c5200 0 0xec>,
> +			      <0 0x220c5600 0 0xec>,
> +			      <0 0x220c5000 0 0x1c8>;
> +
> +			clocks = <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,
> +				 <&dispcc1 DISP_CC_MDSS_AHB_CLK>;
> +			clock-names = "aux", "cfg_ahb";
> +
> +			power-domains = <&rpmhpd SC8280XP_MX>;
> +
> +			#clock-cells = <1>;
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
> +		dispcc1: clock-controller@22100000 {
> +			compatible = "qcom,sc8280xp-dispcc1";
> +			reg = <0 0x22100000 0 0x20000>;
> +			clocks = <&gcc GCC_DISP_AHB_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>,
> +				 <0>,
> +				 <&mdss1_dp0_phy 0>,
> +				 <&mdss1_dp0_phy 1>,
> +				 <&mdss1_dp1_phy 0>,
> +				 <&mdss1_dp1_phy 1>,
> +				 <&mdss1_dp2_phy 0>,
> +				 <&mdss1_dp2_phy 1>,
> +				 <&mdss1_dp3_phy 0>,
> +				 <&mdss1_dp3_phy 1>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			power-domains = <&rpmhpd SC8280XP_MMCX>;
> +			required-opps = <&rpmhpd_opp_nom>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +
> +			status = "disabled";
> +		};
>   	};
>   
>   	thermal-zones {

Re: [PATCH v3 10/12] arm64: dts: qcom: sc8280xp: Define some of the display blocks

[Bjorn Andersson]

On Fri, Nov 18, 2022 at 03:15:25PM -0800, Kuogee Hsieh wrote:
> 
> On 10/25/2022 8:26 PM, Bjorn Andersson wrote:
[..]
> > +		mdss0: display-subsystem@ae00000 {
[..]
> > +
> just curious, where are mdss0_dp0 and mdss0_dp1?. Are two dp/usb combo phys
> not going used?

They are, but at the time of posting this, the QMP nodes was still being
reworked to support expressing the DP-part of things.

Now that the rework is in place I will include them as I respin this
series.

Regards,
Bjorn

[PATCH v3 11/12] arm64: dts: qcom: sc8280xp-crd: Enable EDP

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- New patch on list

 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 49 ++++++++++++++++++++++-
 1 file changed, 48 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 07e80dfe575d..bc906bcb26a4 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -20,7 +20,7 @@ aliases {
 		serial0 = &qup2_uart17;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pmc8280c_lpg 3 1000000>;
 		enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>;
@@ -184,6 +184,53 @@ vreg_l9d: ldo9 {
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp3 {
+	compatible = "qcom,sc8280xp-edp";
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			ports {
+				port {
+					edp_panel_in: endpoint {
+						remote-endpoint = <&mdss0_dp3_out>;
+					};
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_out: endpoint {
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b>;
+	vdda-pll-supply = <&vreg_l3b>;
+};
+
 &pmc8280c_lpg {
 	status = "okay";
 };
-- 
2.37.3

[PATCH v3 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances

[Bjorn Andersson]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.

Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---

Changes since v2:
- New patch on list

 arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 244 ++++++++++++++++++++++-
 1 file changed, 242 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2c62ba6a49c5..f35345115c85 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -23,6 +23,90 @@ aliases {
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	dp2-connector {
+		compatible = "dp-connector";
+		label = "DP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp0_phy_out>;
+			};
+		};
+	};
+
+	dp3-connector {
+		compatible = "dp-connector";
+		label = "DP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp1_phy_out>;
+			};
+		};
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp3_phy_out>;
+			};
+		};
+	};
+
+	edp2-connector {
+		compatible = "dp-connector";
+		label = "EDP2";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp2_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp2_phy_out>;
+			};
+		};
+	};
+
+	edp3-connector {
+		compatible = "dp-connector";
+		label = "EDP3";
+		type = "mini";
+
+		hpd-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		port {
+			edp3_connector_in: endpoint {
+				remote-endpoint = <&mdss1_dp3_phy_out>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
 
 		vreg_l8g: ldo8 {
 			regulator-name = "vreg_l8g";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+		};
+
+		vreg_l11g: ldo11 {
+			regulator-name = "vreg_l11g";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
 };
 
+&dispcc0 {
+	status = "okay";
+};
+
+&dispcc1 {
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp2 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp0_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss0_dp3 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss0_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp1_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss0_dp3_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1 {
+	status = "okay";
+};
+
+&mdss1_dp0 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp0_phy_out: endpoint {
+				remote-endpoint = <&dp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp0_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp1 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp1_phy_out: endpoint {
+				remote-endpoint = <&dp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp2 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp2_phy_out: endpoint {
+				remote-endpoint = <&edp2_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp2_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
+&mdss1_dp3 {
+	status = "okay";
+
+	data-lanes = <0 1 2 3>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mdss1_dp3_phy_out: endpoint {
+				remote-endpoint = <&edp3_connector_in>;
+			};
+		};
+	};
+};
+
+&mdss1_dp3_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l11g>;
+	vdda-pll-supply = <&vreg_l3g>;
+};
+
 &qup2 {
 	status = "okay";
 };
-- 
2.37.3

Re: [PATCH v3 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances

[Johan Hovold]

On Tue, Oct 25, 2022 at 08:26:24PM -0700, Bjorn Andersson wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
> 
> Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> DP PHYs and link them all together.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---

>  &apps_rsc {
> @@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
>  
>  		vreg_l8g: ldo8 {
>  			regulator-name = "vreg_l8g";
> -			regulator-min-microvolt = <880000>;
> -			regulator-max-microvolt = <880000>;
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-allow-set-load;

Did you really intend to allow set-load here?

I'm guessing this wasn't the case, but otherwise you also need to
specify the valid modes.

> +		};
> +
> +		vreg_l11g: ldo11 {
> +			regulator-name = "vreg_l11g";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <912000>;
>  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>  		};
>  	};
>  };

> +&mdss0_dp2_phy {
> +	status = "okay";
> +
> +	vdda-phy-supply = <&vreg_l8g>;
> +	vdda-pll-supply = <&vreg_l3g>;
> +};

Johan

Re: [PATCH v3 12/12] arm64: dts: qcom: sa8295-adp: Enable DP instances

[Bjorn Andersson]

On Wed, Oct 26, 2022 at 01:50:15PM +0200, Johan Hovold wrote:
> On Tue, Oct 25, 2022 at 08:26:24PM -0700, Bjorn Andersson wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > The SA8295P ADP has, among other interfaces, six MiniDP connectors which
> > are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
> > 
> > Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
> > DP PHYs and link them all together.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > ---
> 
> >  &apps_rsc {
> > @@ -156,13 +240,169 @@ vreg_l7g: ldo7 {
> >  
> >  		vreg_l8g: ldo8 {
> >  			regulator-name = "vreg_l8g";
> > -			regulator-min-microvolt = <880000>;
> > -			regulator-max-microvolt = <880000>;
> > +			regulator-min-microvolt = <912000>;
> > +			regulator-max-microvolt = <912000>;
> > +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> > +			regulator-allow-set-load;
> 
> Did you really intend to allow set-load here?
> 
> I'm guessing this wasn't the case, but otherwise you also need to
> specify the valid modes.
> 

I see no reason for keeping it at this point in time, will drop it.

Thanks,
Bjorn

> > +		};
> > +
> > +		vreg_l11g: ldo11 {
> > +			regulator-name = "vreg_l11g";
> > +			regulator-min-microvolt = <912000>;
> > +			regulator-max-microvolt = <912000>;
> >  			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> >  		};
> >  	};
> >  };
> 
> > +&mdss0_dp2_phy {
> > +	status = "okay";
> > +
> > +	vdda-phy-supply = <&vreg_l8g>;
> > +	vdda-pll-supply = <&vreg_l3g>;
> > +};
> 
> Johan