From: Hugo Villeneuve <hugo@hugovil.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, hugo@hugovil.com,
Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: [PATCH v3 01/14] rtc: pcf2127: add variant-specific configuration structure
Date: Thu, 15 Dec 2022 10:02:02 -0500 [thread overview]
Message-ID: <20221215150214.1109074-2-hugo@hugovil.com> (raw)
In-Reply-To: <20221215150214.1109074-1-hugo@hugovil.com>
From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Create variant-specific configuration structures to simplify the
implementation of new variants into this driver. It will also avoid
to have too many tests for a specific variant, or a list of variants
for new devices, inside the code itself.
Add configuration options for the support of the NVMEM, bit CD0 in
register WD_CTL as well as the maximum number of registers for each
variant, instead of hardcoding the variant (PCF2127) inside the
i2c_device_id and spi_device_id structures.
Also specify a different maximum number of registers (max_register)
for the PCF2129.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
drivers/rtc/rtc-pcf2127.c | 95 +++++++++++++++++++++++++++++++--------
1 file changed, 76 insertions(+), 19 deletions(-)
diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index 87f4fc9df68b..b9a5d47a439f 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -21,6 +21,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/of_device.h>
#include <linux/regmap.h>
#include <linux/watchdog.h>
@@ -101,10 +102,17 @@
PCF2127_BIT_CTRL2_WDTF | \
PCF2127_BIT_CTRL2_TSF2)
+struct pcf21xx_config {
+ int max_register;
+ unsigned int has_nvmem:1;
+ unsigned int has_bit_wd_ctl_cd0:1;
+};
+
struct pcf2127 {
struct rtc_device *rtc;
struct watchdog_device wdd;
struct regmap *regmap;
+ const struct pcf21xx_config *cfg;
time64_t ts;
bool ts_valid;
bool irq_enabled;
@@ -631,8 +639,27 @@ static const struct attribute_group pcf2127_attr_group = {
.attrs = pcf2127_attrs,
};
+enum pcf21xx_type {
+ PCF2127,
+ PCF2129,
+ PCF21XX_LAST_ID
+};
+
+static struct pcf21xx_config pcf21xx_cfg[] = {
+ [PCF2127] = {
+ .max_register = 0x1d,
+ .has_nvmem = 1,
+ .has_bit_wd_ctl_cd0 = 1,
+ },
+ [PCF2129] = {
+ .max_register = 0x19,
+ .has_nvmem = 0,
+ .has_bit_wd_ctl_cd0 = 0,
+ },
+};
+
static int pcf2127_probe(struct device *dev, struct regmap *regmap,
- int alarm_irq, const char *name, bool is_pcf2127)
+ int alarm_irq, const char *name, const struct pcf21xx_config *config)
{
struct pcf2127 *pcf2127;
int ret = 0;
@@ -645,6 +672,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
return -ENOMEM;
pcf2127->regmap = regmap;
+ pcf2127->cfg = config;
dev_set_drvdata(dev, pcf2127);
@@ -688,7 +716,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
set_bit(RTC_FEATURE_ALARM, pcf2127->rtc->features);
}
- if (is_pcf2127) {
+ if (pcf2127->cfg->has_nvmem) {
struct nvmem_config nvmem_cfg = {
.priv = pcf2127,
.reg_read = pcf2127_nvmem_read,
@@ -734,7 +762,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
PCF2127_BIT_WD_CTL_TF1 |
PCF2127_BIT_WD_CTL_TF0,
PCF2127_BIT_WD_CTL_CD1 |
- (is_pcf2127 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
+ (pcf2127->cfg->has_bit_wd_ctl_cd0 ? PCF2127_BIT_WD_CTL_CD0 : 0) |
PCF2127_BIT_WD_CTL_TF1);
if (ret) {
dev_err(dev, "%s: watchdog config (wd_ctl) failed\n", __func__);
@@ -799,9 +827,9 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
#ifdef CONFIG_OF
static const struct of_device_id pcf2127_of_match[] = {
- { .compatible = "nxp,pcf2127" },
- { .compatible = "nxp,pcf2129" },
- { .compatible = "nxp,pca2129" },
+ { .compatible = "nxp,pcf2127", .data = &pcf21xx_cfg[PCF2127] },
+ { .compatible = "nxp,pcf2129", .data = &pcf21xx_cfg[PCF2129] },
+ { .compatible = "nxp,pca2129", .data = &pcf21xx_cfg[PCF2129] },
{}
};
MODULE_DEVICE_TABLE(of, pcf2127_of_match);
@@ -886,26 +914,40 @@ static const struct regmap_bus pcf2127_i2c_regmap = {
static struct i2c_driver pcf2127_i2c_driver;
static const struct i2c_device_id pcf2127_i2c_id[] = {
- { "pcf2127", 1 },
- { "pcf2129", 0 },
- { "pca2129", 0 },
+ { "pcf2127", PCF2127 },
+ { "pcf2129", PCF2129 },
+ { "pca2129", PCF2129 },
{ }
};
MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
static int pcf2127_i2c_probe(struct i2c_client *client)
{
- const struct i2c_device_id *id = i2c_match_id(pcf2127_i2c_id, client);
struct regmap *regmap;
- static const struct regmap_config config = {
+ static struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = 0x1d,
};
+ const struct pcf21xx_config *variant;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
return -ENODEV;
+ if (client->dev.of_node) {
+ variant = of_device_get_match_data(&client->dev);
+ if (!variant)
+ return -ENODEV;
+ } else {
+ enum pcf21xx_type type =
+ i2c_match_id(pcf2127_i2c_id, client)->driver_data;
+
+ if (type >= PCF21XX_LAST_ID)
+ return -ENODEV;
+ variant = &pcf21xx_cfg[type];
+ }
+
+ config.max_register = variant->max_register,
+
regmap = devm_regmap_init(&client->dev, &pcf2127_i2c_regmap,
&client->dev, &config);
if (IS_ERR(regmap)) {
@@ -915,7 +957,7 @@ static int pcf2127_i2c_probe(struct i2c_client *client)
}
return pcf2127_probe(&client->dev, regmap, client->irq,
- pcf2127_i2c_driver.driver.name, id->driver_data);
+ pcf2127_i2c_driver.driver.name, variant);
}
static struct i2c_driver pcf2127_i2c_driver = {
@@ -953,17 +995,32 @@ static void pcf2127_i2c_unregister_driver(void)
#if IS_ENABLED(CONFIG_SPI_MASTER)
static struct spi_driver pcf2127_spi_driver;
+static const struct spi_device_id pcf2127_spi_id[];
static int pcf2127_spi_probe(struct spi_device *spi)
{
- static const struct regmap_config config = {
+ static struct regmap_config config = {
.reg_bits = 8,
.val_bits = 8,
.read_flag_mask = 0xa0,
.write_flag_mask = 0x20,
- .max_register = 0x1d,
};
struct regmap *regmap;
+ const struct pcf21xx_config *variant;
+
+ if (spi->dev.of_node) {
+ variant = of_device_get_match_data(&spi->dev);
+ if (!variant)
+ return -ENODEV;
+ } else {
+ enum pcf21xx_type type = spi_get_device_id(spi)->driver_data;
+
+ if (type >= PCF21XX_LAST_ID)
+ return -ENODEV;
+ variant = &pcf21xx_cfg[type];
+ }
+
+ config.max_register = variant->max_register,
regmap = devm_regmap_init_spi(spi, &config);
if (IS_ERR(regmap)) {
@@ -974,13 +1031,13 @@ static int pcf2127_spi_probe(struct spi_device *spi)
return pcf2127_probe(&spi->dev, regmap, spi->irq,
pcf2127_spi_driver.driver.name,
- spi_get_device_id(spi)->driver_data);
+ variant);
}
static const struct spi_device_id pcf2127_spi_id[] = {
- { "pcf2127", 1 },
- { "pcf2129", 0 },
- { "pca2129", 0 },
+ { "pcf2127", PCF2127 },
+ { "pcf2129", PCF2129 },
+ { "pca2129", PCF2129 },
{ }
};
MODULE_DEVICE_TABLE(spi, pcf2127_spi_id);
--
2.30.2
next prev parent reply other threads:[~2022-12-15 15:18 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 15:02 [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Hugo Villeneuve
2022-12-15 15:02 ` Hugo Villeneuve [this message]
2022-12-19 9:05 ` [PATCH v3 01/14] rtc: pcf2127: add variant-specific configuration structure Bruno Thomsen
2022-12-19 15:15 ` Hugo Villeneuve
2022-12-19 17:17 ` Bruno Thomsen
2022-12-19 18:30 ` Hugo Villeneuve
2023-01-07 16:52 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 02/14] rtc: pcf2127: adapt for time/date registers at any offset Hugo Villeneuve
2022-12-19 9:34 ` Bruno Thomsen
2022-12-19 16:27 ` Hugo Villeneuve
2023-01-07 16:49 ` Bruno Thomsen
2023-01-20 18:47 ` Alexandre Belloni
2023-01-23 15:54 ` Hugo Villeneuve
2023-06-21 18:18 ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 03/14] rtc: pcf2127: adapt for alarm " Hugo Villeneuve
2023-01-07 16:57 ` Bruno Thomsen
2023-01-20 17:10 ` Alexandre Belloni
2023-01-23 16:02 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 04/14] rtc: pcf2127: adapt for WD " Hugo Villeneuve
2023-01-07 16:59 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 05/14] rtc: pcf2127: adapt for CLKOUT register " Hugo Villeneuve
2023-01-07 17:01 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 06/14] rtc: pcf2127: add support for multiple TS functions Hugo Villeneuve
2023-01-07 17:58 ` Bruno Thomsen
2023-01-23 20:41 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 07/14] rtc: pcf2127: add support for PCF2131 RTC Hugo Villeneuve
2023-01-07 18:15 ` Bruno Thomsen
2023-01-23 19:06 ` Hugo Villeneuve
2023-01-20 18:57 ` Alexandre Belloni
2023-01-23 17:27 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A Hugo Villeneuve
2023-01-07 18:17 ` Bruno Thomsen
2023-01-20 16:56 ` Alexandre Belloni
2023-01-23 20:52 ` Hugo Villeneuve
2023-05-11 17:19 ` Hugo Villeneuve
2023-06-21 19:24 ` Alexandre Belloni
2023-06-21 19:26 ` Alexandre Belloni
2023-06-22 14:21 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 09/14] rtc: pcf2127: set PWRMNG value for PCF2131 Hugo Villeneuve
2023-01-07 18:36 ` Bruno Thomsen
2023-01-20 16:39 ` Alexandre Belloni
2023-01-23 22:07 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 10/14] rtc: pcf2127: read and validate PCF2131 device signature Hugo Villeneuve
2023-01-20 17:01 ` Alexandre Belloni
2023-01-23 17:31 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 11/14] rtc: pcf2127: adapt time/date registers write sequence for PCF2131 Hugo Villeneuve
2023-01-07 18:44 ` Bruno Thomsen
2023-01-23 20:55 ` Hugo Villeneuve
2023-01-20 17:09 ` Alexandre Belloni
2023-01-23 21:57 ` Hugo Villeneuve
2023-06-21 19:36 ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 12/14] rtc: pcf2127: support generic watchdog timing configuration Hugo Villeneuve
2023-01-18 13:23 ` Philipp Rosenberger
2023-01-19 17:48 ` Hugo Villeneuve
2023-01-20 8:06 ` Philipp Rosenberger
2023-01-20 14:44 ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 13/14] rtc: pcf2127: add flag for watchdog register value read support Hugo Villeneuve
2023-01-07 18:47 ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 14/14] dt-bindings: rtc: pcf2127: add PCF2131 Hugo Villeneuve
2022-12-16 13:24 ` Krzysztof Kozlowski
2022-12-19 9:14 ` Bruno Thomsen
2022-12-19 16:25 ` Hugo Villeneuve
2022-12-19 17:18 ` Bruno Thomsen
2022-12-19 18:31 ` Hugo Villeneuve
2023-01-20 19:05 ` [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Alexandre Belloni
2023-01-23 15:51 ` Hugo Villeneuve
2023-06-21 14:14 ` Hugo Villeneuve
2023-06-21 16:59 ` Hugo Villeneuve
2023-06-21 18:14 ` Alexandre Belloni
2023-06-21 18:28 ` Hugo Villeneuve
2023-07-05 13:40 ` Hugo Villeneuve
2023-07-07 14:16 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221215150214.1109074-2-hugo@hugovil.com \
--to=hugo@hugovil.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=hvilleneuve@dimonoff.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).