linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hugo Villeneuve <hugo@hugovil.com>
To: a.zummo@towertech.it, alexandre.belloni@bootlin.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, hugo@hugovil.com,
	Hugo Villeneuve <hvilleneuve@dimonoff.com>
Subject: [PATCH v3 04/14] rtc: pcf2127: adapt for WD registers at any offset
Date: Thu, 15 Dec 2022 10:02:05 -0500	[thread overview]
Message-ID: <20221215150214.1109074-5-hugo@hugovil.com> (raw)
In-Reply-To: <20221215150214.1109074-1-hugo@hugovil.com>

From: Hugo Villeneuve <hvilleneuve@dimonoff.com>

This will simplify the implementation of new variants into this driver.

Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
---
 drivers/rtc/rtc-pcf2127.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2127.c b/drivers/rtc/rtc-pcf2127.c
index db0cb784c0c9..5d8c06e32dce 100644
--- a/drivers/rtc/rtc-pcf2127.c
+++ b/drivers/rtc/rtc-pcf2127.c
@@ -114,6 +114,8 @@ struct pcf21xx_config {
 	unsigned int has_bit_wd_ctl_cd0:1;
 	u8 regs_td_base; /* Time/data base registers. */
 	u8 regs_alarm_base; /* Alarm function base registers. */
+	u8 reg_wd_ctl; /* Watchdog control register. */
+	u8 reg_wd_val; /* Watchdog value register. */
 };
 
 struct pcf2127 {
@@ -297,7 +299,7 @@ static int pcf2127_wdt_ping(struct watchdog_device *wdd)
 {
 	struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
 
-	return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL, wdd->timeout);
+	return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val, wdd->timeout);
 }
 
 /*
@@ -331,7 +333,7 @@ static int pcf2127_wdt_stop(struct watchdog_device *wdd)
 {
 	struct pcf2127 *pcf2127 = watchdog_get_drvdata(wdd);
 
-	return regmap_write(pcf2127->regmap, PCF2127_REG_WD_VAL,
+	return regmap_write(pcf2127->regmap, pcf2127->cfg->reg_wd_val,
 			    PCF2127_WD_VAL_STOP);
 }
 
@@ -380,7 +382,7 @@ static int pcf2127_watchdog_init(struct device *dev, struct pcf2127 *pcf2127)
 	watchdog_set_drvdata(&pcf2127->wdd, pcf2127);
 
 	/* Test if watchdog timer is started by bootloader */
-	ret = regmap_read(pcf2127->regmap, PCF2127_REG_WD_VAL, &wdd_timeout);
+	ret = regmap_read(pcf2127->regmap, pcf2127->cfg->reg_wd_val, &wdd_timeout);
 	if (ret)
 		return ret;
 
@@ -664,6 +666,8 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
 		.has_bit_wd_ctl_cd0 = 1,
 		.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
 		.regs_alarm_base = PCF2127_REG_ALARM_BASE,
+		.reg_wd_ctl = PCF2127_REG_WD_CTL,
+		.reg_wd_val = PCF2127_REG_WD_VAL,
 	},
 	[PCF2129] = {
 		.max_register = 0x19,
@@ -671,6 +675,8 @@ static struct pcf21xx_config pcf21xx_cfg[] = {
 		.has_bit_wd_ctl_cd0 = 0,
 		.regs_td_base = PCF2127_REG_TIME_DATE_BASE,
 		.regs_alarm_base = PCF2127_REG_ALARM_BASE,
+		.reg_wd_ctl = PCF2127_REG_WD_CTL,
+		.reg_wd_val = PCF2127_REG_WD_VAL,
 	},
 };
 
@@ -772,7 +778,7 @@ static int pcf2127_probe(struct device *dev, struct regmap *regmap,
 	 * as T. Bits labeled as T must always be written with
 	 * logic 0.
 	 */
-	ret = regmap_update_bits(pcf2127->regmap, PCF2127_REG_WD_CTL,
+	ret = regmap_update_bits(pcf2127->regmap, pcf2127->cfg->reg_wd_ctl,
 				 PCF2127_BIT_WD_CTL_CD1 |
 				 PCF2127_BIT_WD_CTL_CD0 |
 				 PCF2127_BIT_WD_CTL_TF1 |
-- 
2.30.2


  parent reply	other threads:[~2022-12-15 15:18 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-15 15:02 [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 01/14] rtc: pcf2127: add variant-specific configuration structure Hugo Villeneuve
2022-12-19  9:05   ` Bruno Thomsen
2022-12-19 15:15     ` Hugo Villeneuve
2022-12-19 17:17       ` Bruno Thomsen
2022-12-19 18:30         ` Hugo Villeneuve
2023-01-07 16:52   ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 02/14] rtc: pcf2127: adapt for time/date registers at any offset Hugo Villeneuve
2022-12-19  9:34   ` Bruno Thomsen
2022-12-19 16:27     ` Hugo Villeneuve
2023-01-07 16:49     ` Bruno Thomsen
2023-01-20 18:47   ` Alexandre Belloni
2023-01-23 15:54     ` Hugo Villeneuve
2023-06-21 18:18       ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 03/14] rtc: pcf2127: adapt for alarm " Hugo Villeneuve
2023-01-07 16:57   ` Bruno Thomsen
2023-01-20 17:10   ` Alexandre Belloni
2023-01-23 16:02     ` Hugo Villeneuve
2022-12-15 15:02 ` Hugo Villeneuve [this message]
2023-01-07 16:59   ` [PATCH v3 04/14] rtc: pcf2127: adapt for WD " Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 05/14] rtc: pcf2127: adapt for CLKOUT register " Hugo Villeneuve
2023-01-07 17:01   ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 06/14] rtc: pcf2127: add support for multiple TS functions Hugo Villeneuve
2023-01-07 17:58   ` Bruno Thomsen
2023-01-23 20:41     ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 07/14] rtc: pcf2127: add support for PCF2131 RTC Hugo Villeneuve
2023-01-07 18:15   ` Bruno Thomsen
2023-01-23 19:06     ` Hugo Villeneuve
2023-01-20 18:57   ` Alexandre Belloni
2023-01-23 17:27     ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 08/14] rtc: pcf2127: add support for PCF2131 interrupts on output INT_A Hugo Villeneuve
2023-01-07 18:17   ` Bruno Thomsen
2023-01-20 16:56   ` Alexandre Belloni
2023-01-23 20:52     ` Hugo Villeneuve
2023-05-11 17:19       ` Hugo Villeneuve
2023-06-21 19:24         ` Alexandre Belloni
2023-06-21 19:26           ` Alexandre Belloni
2023-06-22 14:21             ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 09/14] rtc: pcf2127: set PWRMNG value for PCF2131 Hugo Villeneuve
2023-01-07 18:36   ` Bruno Thomsen
2023-01-20 16:39     ` Alexandre Belloni
2023-01-23 22:07       ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 10/14] rtc: pcf2127: read and validate PCF2131 device signature Hugo Villeneuve
2023-01-20 17:01   ` Alexandre Belloni
2023-01-23 17:31     ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 11/14] rtc: pcf2127: adapt time/date registers write sequence for PCF2131 Hugo Villeneuve
2023-01-07 18:44   ` Bruno Thomsen
2023-01-23 20:55     ` Hugo Villeneuve
2023-01-20 17:09   ` Alexandre Belloni
2023-01-23 21:57     ` Hugo Villeneuve
2023-06-21 19:36       ` Alexandre Belloni
2022-12-15 15:02 ` [PATCH v3 12/14] rtc: pcf2127: support generic watchdog timing configuration Hugo Villeneuve
2023-01-18 13:23   ` Philipp Rosenberger
2023-01-19 17:48     ` Hugo Villeneuve
2023-01-20  8:06       ` Philipp Rosenberger
2023-01-20 14:44         ` Hugo Villeneuve
2022-12-15 15:02 ` [PATCH v3 13/14] rtc: pcf2127: add flag for watchdog register value read support Hugo Villeneuve
2023-01-07 18:47   ` Bruno Thomsen
2022-12-15 15:02 ` [PATCH v3 14/14] dt-bindings: rtc: pcf2127: add PCF2131 Hugo Villeneuve
2022-12-16 13:24   ` Krzysztof Kozlowski
2022-12-19  9:14   ` Bruno Thomsen
2022-12-19 16:25     ` Hugo Villeneuve
2022-12-19 17:18       ` Bruno Thomsen
2022-12-19 18:31         ` Hugo Villeneuve
2023-01-20 19:05 ` [PATCH v3 00/14] rtc: pcf2127: add PCF2131 driver Alexandre Belloni
2023-01-23 15:51   ` Hugo Villeneuve
2023-06-21 14:14   ` Hugo Villeneuve
2023-06-21 16:59     ` Hugo Villeneuve
2023-06-21 18:14       ` Alexandre Belloni
2023-06-21 18:28         ` Hugo Villeneuve
2023-07-05 13:40           ` Hugo Villeneuve
2023-07-07 14:16             ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221215150214.1109074-5-hugo@hugovil.com \
    --to=hugo@hugovil.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hvilleneuve@dimonoff.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).