* [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs
@ 2023-01-23 9:57 Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
` (7 more replies)
0 siblings, 8 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset
series
Changes from v6:
* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but
requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/20221122092203.762308-1-mranostay@ti.com/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for
SPI node to "simple-bus"
Changes from v7:
* Fix node names as per bindings document
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 85 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 137 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 ++++++
4 files changed, 303 insertions(+)
--
2.17.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-26 12:24 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
` (6 subsequent siblings)
7 siblings, 1 reply; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
Add support for single instance of USB 3.0 controller in J721S2 SoC.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-2-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 8915132efcc1..c0daa75116f9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -26,6 +26,20 @@
};
};
+ scm_conf: syscon@104000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00 0x00104000 0x00 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00104000 0x18000>;
+
+ usb_serdes_mux: mux-controller@0 {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
+ };
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
@@ -745,6 +759,34 @@
};
};
+ usbss0: cdns-usb@4104000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x04104000 0x00 0x100>;
+ clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 360 17>;
+ power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+
+ usb0: usb@6000000 {
+ compatible = "cdns,usb3";
+ reg = <0x00 0x06000000 0x00 0x10000>,
+ <0x00 0x06010000 0x00 0x10000>,
+ <0x00 0x06020000 0x00 0x10000>;
+ reg-names = "otg", "xhci", "dev";
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host", "peripheral", "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+
main_mcan0: can@2701000 {
compatible = "bosch,m_can";
reg = <0x00 0x02701000 0x00 0x200>,
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Matt Ranostay <mranostay@ti.com>
Add dt node for the single instance of WIZ (SERDES wrapper) and
SERDES module shared by PCIe, eDP and USB.
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-3-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 54 ++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index c0daa75116f9..08df0050fe4e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -5,6 +5,17 @@
* Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+ serdes_refclk: clock-cmnrefclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+};
+
&cbass_main {
msmc_ram: sram@70000000 {
compatible = "mmio-sram";
@@ -38,6 +49,13 @@
#mux-control-cells = <1>;
mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
};
+
+ serdes_ln_ctrl: mux-controller@80 {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x80 0x3>, <0x84 0x3>, /* SERDES0 lane0/1 select */
+ <0x88 0x3>, <0x8c 0x3>; /* SERDES0 lane2/3 select */
+ };
};
gic500: interrupt-controller@1800000 {
@@ -787,6 +805,42 @@
};
};
+ serdes_wiz0: wiz@5060000 {
+ compatible = "ti,j721s2-wiz-10g";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ power-domains = <&k3_pds 365 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 365 0>, <&k3_clks 365 3>, <&serdes_refclk>;
+ clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+ num-lanes = <4>;
+ #reset-cells = <1>;
+ #clock-cells = <1>;
+ ranges = <0x5060000 0x0 0x5060000 0x10000>;
+
+ assigned-clocks = <&k3_clks 365 3>;
+ assigned-clock-parents = <&k3_clks 365 7>;
+
+ serdes0: serdes@5060000 {
+ compatible = "ti,j721e-serdes-10g";
+ reg = <0x05060000 0x00010000>;
+ reg-names = "torrent_phy";
+ resets = <&serdes_wiz0 0>;
+ reset-names = "torrent_reset";
+ clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+ clock-names = "refclk", "phy_en_refclk";
+ assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+ <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+ assigned-clock-parents = <&k3_clks 365 3>,
+ <&k3_clks 365 3>,
+ <&k3_clks 365 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <1>;
+ };
+ };
+
main_mcan0: can@2701000 {
compatible = "bosch,m_can";
reg = <0x00 0x02701000 0x00 0x200>,
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-26 12:26 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
` (4 subsequent siblings)
7 siblings, 1 reply; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
Add support for two instance of OSPI in J721S2 SoC.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-4-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..d404b595316e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -306,4 +306,43 @@
ti,cpts-periodic-outputs = <2>;
};
};
+
+ fss: bus@47000000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ospi0: spi@47040000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47040000 0x00 0x100>,
+ <0x5 0x0000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 109 5>;
+ assigned-clocks = <&k3_clks 109 5>;
+ assigned-clock-parents = <&k3_clks 109 7>;
+ assigned-clock-rates = <166666666>;
+ power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ ospi1: spi@47050000 {
+ compatible = "ti,am654-ospi", "cdns,qspi-nor";
+ reg = <0x00 0x47050000 0x00 0x100>,
+ <0x7 0x0000000 0x1 0x0000000>;
+ interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x0>;
+ clocks = <&k3_clks 110 5>;
+ power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
};
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
` (2 preceding siblings ...)
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
Configure first lane to PCIe, the second lane to USB and the last two lanes
to eDP. Also, add sub-nodes to SERDES0 DT node to represent SERDES0 is
connected to PCIe.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-5-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
.../dts/ti/k3-j721s2-common-proc-board.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a7aa6cf08acd..c3a397484c70 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -9,6 +9,9 @@
#include "k3-j721s2-som-p0.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-cadence.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/ti-serdes.h>
/ {
compatible = "ti,j721s2-evm", "ti,j721s2";
@@ -296,6 +299,25 @@
phy-handle = <&phy0>;
};
+&serdes_ln_ctrl {
+ idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>,
+ <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>;
+};
+
+&serdes_refclk {
+ clock-frequency = <100000000>;
+};
+
+&serdes0 {
+ serdes0_pcie_link: phy@0 {
+ reg = <0>;
+ cdns,num-lanes = <1>;
+ #phy-cells = <0>;
+ cdns,phy-type = <PHY_TYPE_PCIE>;
+ resets = <&serdes_wiz0 1>;
+ };
+};
+
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
` (3 preceding siblings ...)
2023-01-23 9:57 ` [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
The board uses lane 1 of SERDES for USB. Set the mux
accordingly.
The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that upto 2 protocols can be used at a time. The SERDES is
wired for PCIe, eDP and USB super-speed. It has been
chosen to use PCIe and eDP as default. So restrict
USB0 to high-speed mode.
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-6-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
.../dts/ti/k3-j721s2-common-proc-board.dts | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c3a397484c70..c787d46f89de 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -147,6 +147,12 @@
J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */
>;
};
+
+ main_usbss0_pins_default: main-usbss0-pins-default {
+ pinctrl-single,pins = <
+ J721S2_IOPAD(0x0ec, PIN_OUTPUT, 6) /* (AG25) TIMER_IO1.USB0_DRVVBUS */
+ >;
+ };
};
&wkup_pmx0 {
@@ -318,6 +324,22 @@
};
};
+&usb_serdes_mux {
+ idle-states = <1>; /* USB0 to SERDES lane 1 */
+};
+
+&usbss0 {
+ pinctrl-0 = <&main_usbss0_pins_default>;
+ pinctrl-names = "default";
+ ti,vbus-divider;
+ ti,usb2-only;
+};
+
+&usb0 {
+ dr_mode = "otg";
+ maximum-speed = "high-speed";
+};
+
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
` (4 preceding siblings ...)
2023-01-23 9:57 ` [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
J721S2 has an OSPI NOR flash on its SOM connected the OSPI0 instance and a
QSPI NOR flash on the common processor board connected to the OSPI1
instance. Add support for the same
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-7-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
.../dts/ti/k3-j721s2-common-proc-board.dts | 34 +++++++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 +++++++++++++++++++
2 files changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index c787d46f89de..0503e690cfaf 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -206,6 +206,20 @@
J721S2_WKUP_IOPAD(0x0c8, PIN_INPUT, 7) /* (C28) WKUP_GPIO0_2 */
>;
};
+
+ mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default {
+ pinctrl-single,pins = <
+ J721S2_WKUP_IOPAD(0x040, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */
+ J721S2_WKUP_IOPAD(0x05c, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */
+ J721S2_WKUP_IOPAD(0x060, PIN_OUTPUT, 0) /* (C21) MCU_OSPI1_CSn1 */
+ J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */
+ J721S2_WKUP_IOPAD(0x050, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */
+ J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */
+ J721S2_WKUP_IOPAD(0x058, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */
+ J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (B19) MCU_OSPI1_DQS */
+ J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B20) MCU_OSPI1_LBCLKO */
+ >;
+ };
};
&main_gpio2 {
@@ -340,6 +354,26 @@
maximum-speed = "high-speed";
};
+&ospi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
+
+ flash@0{
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <40000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 6930efff8a5a..2ffea00e19d7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -39,6 +39,28 @@
};
};
+&wkup_pmx0 {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */
+ J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */
+ J721S2_WKUP_IOPAD(0x030, PIN_OUTPUT, 0) /* (G17) MCU_OSPI0_CSn1 */
+ J721S2_WKUP_IOPAD(0x038, PIN_OUTPUT, 0) /* (F14) MCU_OSPI0_CSn2 */
+ J721S2_WKUP_IOPAD(0x03c, PIN_OUTPUT, 0) /* (F17) MCU_OSPI0_CSn3 */
+ J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */
+ J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */
+ J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */
+ J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */
+ J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */
+ J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */
+ J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */
+ J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */
+ J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */
+ J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E20) MCU_OSPI0_LBCLKO */
+ >;
+ };
+};
+
&main_pmx0 {
main_i2c0_pins_default: main-i2c0-pins-default {
pinctrl-single,pins = <
@@ -79,3 +101,23 @@
pinctrl-names = "default";
phys = <&transceiver0>;
};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
` (5 preceding siblings ...)
2023-01-23 9:57 ` [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
Add PCIe1 RC device tree node for the single PCIe instance present on
the j721s2.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-8-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 08df0050fe4e..c17d19517bc6 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -841,6 +841,47 @@
};
};
+ pcie1_rc: pcie@2910000 {
+ compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host";
+ reg = <0x00 0x02910000 0x00 0x1000>,
+ <0x00 0x02917000 0x00 0x400>,
+ <0x00 0x0d800000 0x00 0x00800000>,
+ <0x00 0x18000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ interrupt-names = "link_state";
+ interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
+ device_type = "pci";
+ ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
+ max-link-speed = <3>;
+ num-lanes = <4>;
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 276 41>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ vendor-id = <0x104c>;
+ device-id = <0xb013>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>, /* INT A */
+ <0 0 0 2 &pcie1_intc 0>, /* INT B */
+ <0 0 0 3 &pcie1_intc 0>, /* INT C */
+ <0 0 0 4 &pcie1_intc 0>; /* INT D */
+
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
main_mcan0: can@2701000 {
compatible = "bosch,m_can";
reg = <0x00 0x02701000 0x00 0x200>,
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
` (6 preceding siblings ...)
2023-01-23 9:57 ` [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
@ 2023-01-23 9:57 ` Ravi Gunasekaran
7 siblings, 0 replies; 11+ messages in thread
From: Ravi Gunasekaran @ 2023-01-23 9:57 UTC (permalink / raw)
To: nm, afd, vigneshr, kristo, robh+dt, krzysztof.kozlowski+dt,
s-vadapalli, r-gunasekaran
Cc: linux-arm-kernel, devicetree, linux-kernel
From: Aswath Govindraju <a-govindraju@ti.com>
x1 lane PCIe slot in the common processor board is enabled and connected to
J721S2 SOM. Add PCIe DT node in common processor board to reflect the
same.
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Link: https://lore.kernel.org/r/20221122101616.770050-9-mranostay@ti.com
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index 0503e690cfaf..561d70cdee9b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -374,6 +374,13 @@
};
};
+&pcie1_rc {
+ reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ num-lanes = <1>;
+};
+
&mcu_mcan0 {
status = "okay";
pinctrl-names = "default";
--
2.17.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
@ 2023-01-26 12:24 ` Vignesh Raghavendra
0 siblings, 0 replies; 11+ messages in thread
From: Vignesh Raghavendra @ 2023-01-26 12:24 UTC (permalink / raw)
To: Ravi Gunasekaran, nm, afd, kristo, robh+dt,
krzysztof.kozlowski+dt, s-vadapalli
Cc: linux-arm-kernel, devicetree, linux-kernel
On 23/01/23 3:27 pm, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
>
> Add support for single instance of USB 3.0 controller in J721S2 SoC.
>
> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Link: https://lore.kernel.org/r/20221122101616.770050-2-mranostay@ti.com
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> index 8915132efcc1..c0daa75116f9 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
> @@ -26,6 +26,20 @@
> };
> };
>
> + scm_conf: syscon@104000 {
> + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> + reg = <0x00 0x00104000 0x00 0x18000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x00 0x00 0x00104000 0x18000>;
> +
> + usb_serdes_mux: mux-controller@0 {
This is regression back to comments on v1. Cannot you @0 w/o reg
You also missed comments on v7:
https://lore.kernel.org/all/52f276fb-93b3-da8f-c428-05ded94d90cb@ti.com/
> + compatible = "mmio-mux";
> + #mux-control-cells = <1>;
> + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
> + };
> + };
> +
> gic500: interrupt-controller@1800000 {
> compatible = "arm,gic-v3";
> #address-cells = <2>;
> @@ -745,6 +759,34 @@
> };
> };
>
> + usbss0: cdns-usb@4104000 {
> + compatible = "ti,j721e-usb";
> + reg = <0x00 0x04104000 0x00 0x100>;
> + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>;
> + clock-names = "ref", "lpm";
> + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */
> + assigned-clock-parents = <&k3_clks 360 17>;
> + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + dma-coherent;
> +
> + usb0: usb@6000000 {
> + compatible = "cdns,usb3";
> + reg = <0x00 0x06000000 0x00 0x10000>,
> + <0x00 0x06010000 0x00 0x10000>,
> + <0x00 0x06020000 0x00 0x10000>;
> + reg-names = "otg", "xhci", "dev";
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "host", "peripheral", "otg";
> + maximum-speed = "super-speed";
> + dr_mode = "otg";
> + };
> + };
> +
> main_mcan0: can@2701000 {
> compatible = "bosch,m_can";
> reg = <0x00 0x02701000 0x00 0x200>,
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
@ 2023-01-26 12:26 ` Vignesh Raghavendra
0 siblings, 0 replies; 11+ messages in thread
From: Vignesh Raghavendra @ 2023-01-26 12:26 UTC (permalink / raw)
To: Ravi Gunasekaran, nm, afd, kristo, robh+dt,
krzysztof.kozlowski+dt, s-vadapalli
Cc: linux-arm-kernel, devicetree, linux-kernel
On 23/01/23 3:27 pm, Ravi Gunasekaran wrote:
> From: Aswath Govindraju <a-govindraju@ti.com>
>
> Add support for two instance of OSPI in J721S2 SoC.
>
> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
> Signed-off-by: Matt Ranostay <mranostay@ti.com>
> Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
> Link: https://lore.kernel.org/r/20221122101616.770050-4-mranostay@ti.com
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 39 +++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 0af242aa9816..d404b595316e 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -306,4 +306,43 @@
> ti,cpts-periodic-outputs = <2>;
> };
> };
> +
> + fss: bus@47000000 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
make dtbs W=12
Warning (unit_address_vs_reg): /bus@100000/bus@28380000/bus@47000000: node has a unit name, but no reg or ranges property
> + ospi0: spi@47040000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47040000 0x00 0x100>,
> + <0x5 0x0000000 0x1 0x0000000>;
Also, please follow existing convention
<0x05 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 109 5>;
> + assigned-clocks = <&k3_clks 109 5>;
> + assigned-clock-parents = <&k3_clks 109 7>;
> + assigned-clock-rates = <166666666>;
> + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + ospi1: spi@47050000 {
> + compatible = "ti,am654-ospi", "cdns,qspi-nor";
> + reg = <0x00 0x47050000 0x00 0x100>,
> + <0x7 0x0000000 0x1 0x0000000>;
<0x07 0x00000000 0x01 0x0000000>;
> + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
> + cdns,fifo-depth = <256>;
> + cdns,fifo-width = <4>;
> + cdns,trigger-address = <0x0>;
> + clocks = <&k3_clks 110 5>;
> + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + };
> };
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2023-01-26 12:26 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-23 9:57 [PATCH v8 0/8] arm64: j721s2: Add support for additional IPs Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Ravi Gunasekaran
2023-01-26 12:24 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Ravi Gunasekaran
2023-01-26 12:26 ` Vignesh Raghavendra
2023-01-23 9:57 ` [PATCH v8 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Ravi Gunasekaran
2023-01-23 9:57 ` [PATCH v8 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Ravi Gunasekaran
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).