From: Matt Ranostay <mranostay@ti.com> To: <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Date: Tue, 22 Nov 2022 02:16:09 -0800 [thread overview] Message-ID: <20221122101616.770050-2-mranostay@ti.com> (raw) In-Reply-To: <20221122101616.770050-1-mranostay@ti.com> From: Aswath Govindraju <a-govindraju@ti.com> Add support for single instance of USB 3.0 controller in J721S2 SoC. Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> --- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 8915132efcc1..b4869bff4f22 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -26,6 +26,20 @@ l3cache-sram@200000 { }; }; + scm_conf: syscon@104000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00104000 0x00 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00104000 0x18000>; + + usb_serdes_mux: mux-controller-0 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -745,6 +759,34 @@ cpts@310d0000 { }; }; + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x04104000 0x00 0x100>; + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 360 17>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x06000000 0x00 0x10000>, + <0x00 0x06010000 0x00 0x10000>, + <0x00 0x06020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, -- 2.38.GIT
WARNING: multiple messages have this Message-ID (diff)
From: Matt Ranostay <mranostay@ti.com> To: <nm@ti.com>, <afd@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>, <s-vadapalli@ti.com>, <r-gunasekaran@ti.com> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Date: Tue, 22 Nov 2022 02:16:09 -0800 [thread overview] Message-ID: <20221122101616.770050-2-mranostay@ti.com> (raw) In-Reply-To: <20221122101616.770050-1-mranostay@ti.com> From: Aswath Govindraju <a-govindraju@ti.com> Add support for single instance of USB 3.0 controller in J721S2 SoC. Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> --- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 42 ++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index 8915132efcc1..b4869bff4f22 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -26,6 +26,20 @@ l3cache-sram@200000 { }; }; + scm_conf: syscon@104000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x00 0x00104000 0x00 0x18000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00 0x00 0x00104000 0x18000>; + + usb_serdes_mux: mux-controller-0 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -745,6 +759,34 @@ cpts@310d0000 { }; }; + usbss0: cdns-usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x04104000 0x00 0x100>; + clocks = <&k3_clks 360 16>, <&k3_clks 360 15>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 360 16>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 360 17>; + power-domains = <&k3_pds 360 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x06000000 0x00 0x10000>, + <0x00 0x06010000 0x00 0x10000>, + <0x00 0x06020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host", "peripheral", "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + main_mcan0: can@2701000 { compatible = "bosch,m_can"; reg = <0x00 0x02701000 0x00 0x200>, -- 2.38.GIT _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-22 10:16 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-22 10:16 [PATCH v7 0/8] arm64: j721s2: Add support for additional IPs Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay [this message] 2022-11-22 10:16 ` [PATCH v7 1/8] arm64: dts: ti: k3-j721s2-main: Add support for USB Matt Ranostay 2023-01-09 4:07 ` Vignesh Raghavendra 2023-01-09 4:07 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 2/8] arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-23 10:35 ` Ravi Gunasekaran 2022-11-23 10:35 ` Ravi Gunasekaran 2023-01-09 4:09 ` Vignesh Raghavendra 2023-01-09 4:09 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 3/8] arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:03 ` Vaishnav Achath 2022-11-22 14:03 ` Vaishnav Achath 2022-11-29 17:34 ` Andrew Davis 2022-11-29 17:34 ` Andrew Davis 2023-01-09 4:10 ` Vignesh Raghavendra 2023-01-09 4:10 ` Vignesh Raghavendra 2022-11-22 10:16 ` [PATCH v7 4/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0 Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 5/8] arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 10:16 ` [PATCH v7 6/8] arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 14:04 ` Vaishnav Achath 2022-11-22 10:16 ` [PATCH v7 7/8] arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay 2022-11-29 17:53 ` Andrew Davis 2022-11-29 17:53 ` Andrew Davis [not found] ` <20230117092331.GA3277247@desktop-3598> 2023-01-17 9:32 ` Siddharth Vadapalli 2023-01-17 9:32 ` Siddharth Vadapalli 2022-11-22 10:16 ` [PATCH v7 8/8] arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe Matt Ranostay 2022-11-22 10:16 ` Matt Ranostay
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221122101616.770050-2-mranostay@ti.com \ --to=mranostay@ti.com \ --cc=afd@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=r-gunasekaran@ti.com \ --cc=robh+dt@kernel.org \ --cc=s-vadapalli@ti.com \ --cc=vigneshr@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.