[PATCH v8 1/5] dt-bindings: input: pwm-beeper: Convert txt bindings to yaml

[Manuel Traut <manuel.traut@mt.com>]

Converts txt binding to new YAML format.

Signed-off-by: Manuel Traut <manuel.traut@mt.com>
---
 .../devicetree/bindings/input/pwm-beeper.txt  | 24 ----------
 .../devicetree/bindings/input/pwm-beeper.yaml | 48 +++++++++++++++++++
 2 files changed, 48 insertions(+), 24 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt
 create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.yaml

diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
deleted file mode 100644
index 8fc0e48c20db..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* PWM beeper device tree bindings
-
-Registers a PWM device as beeper.
-
-Required properties:
-- compatible: should be "pwm-beeper"
-- pwms: phandle to the physical PWM device
-
-Optional properties:
-- amp-supply: phandle to a regulator that acts as an amplifier for the beeper
-- beeper-hz:  bell frequency in Hz
-
-Example:
-
-beeper_amp: amplifier {
-	compatible = "fixed-regulator";
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-beeper {
-	compatible = "pwm-beeper";
-	pwms = <&pwm0>;
-	amp-supply = <&beeper_amp>;
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
new file mode 100644
index 000000000000..351df83d5cbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/pwm-beeper.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: PWM beeper
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+description: Registers a PWM device as beeper.
+
+properties:
+  compatible:
+    const: pwm-beeper
+
+  pwms:
+    maxItems: 1
+
+  amp-supply:
+    description: >
+      phandle to a regulator that acts as an amplifier for
+      the beeper
+
+  beeper-hz:
+    description: bell frequency in Hz
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    beeper_amp: amplifier {
+      compatible = "fixed-regulator";
+      gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    beeper {
+      compatible = "pwm-beeper";
+      pwms = <&pwm0>;
+      amp-supply = <&beeper_amp>;
+    };
-- 
2.39.0