From: Rasmus Villemoes <linux@rasmusvillemoes.dk>
To: Alessandro Zummo <a.zummo@towertech.it>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-rtc@vger.kernel.org,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/8] rtc: isl12022: add support for trip level DT bindings
Date: Tue, 13 Jun 2023 15:00:06 +0200 [thread overview]
Message-ID: <20230613130011.305589-5-linux@rasmusvillemoes.dk> (raw)
In-Reply-To: <20230613130011.305589-1-linux@rasmusvillemoes.dk>
Implement support for using the values given in the
isil,trip-level[87]5-microvolt properties to set appropriate values in
the VB[87]5TP bits in the PWR_VBAT register.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
drivers/rtc/rtc-isl12022.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/rtc/rtc-isl12022.c b/drivers/rtc/rtc-isl12022.c
index ebd66b835cef..50bbd1fefad8 100644
--- a/drivers/rtc/rtc-isl12022.c
+++ b/drivers/rtc/rtc-isl12022.c
@@ -9,6 +9,7 @@
*/
#include <linux/bcd.h>
+#include <linux/bitfield.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/i2c.h>
@@ -31,6 +32,8 @@
#define ISL12022_REG_SR 0x07
#define ISL12022_REG_INT 0x08
+#define ISL12022_REG_PWR_VBAT 0x0a
+
#define ISL12022_REG_BETA 0x0d
#define ISL12022_REG_TEMP_L 0x28
@@ -42,6 +45,9 @@
#define ISL12022_INT_WRTC (1 << 6)
+#define ISL12022_REG_VB85_MASK GENMASK(5, 3)
+#define ISL12022_REG_VB75_MASK GENMASK(2, 0)
+
#define ISL12022_BETA_TSE (1 << 7)
static umode_t isl12022_hwmon_is_visible(const void *data,
@@ -209,6 +215,35 @@ static const struct regmap_config regmap_config = {
.use_single_write = true,
};
+static const u32 trip_level85[] = { 2125000, 2295000, 2550000, 2805000, 3060000, 4250000, 4675000 };
+static const u32 trip_level75[] = { 1875000, 2025000, 2250000, 2475000, 2700000, 3750000, 4125000 };
+
+static void isl12022_set_trip_levels(struct device *dev)
+{
+ struct regmap *regmap = dev_get_drvdata(dev);
+ u32 level85 = 0, level75 = 0;
+ int ret, x85, x75;
+ u8 val, mask;
+
+ device_property_read_u32(dev, "isil,trip-level85-microvolt", &level85);
+ device_property_read_u32(dev, "isil,trip-level75-microvolt", &level75);
+
+ for (x85 = 0; x85 < ARRAY_SIZE(trip_level85) - 1; x85++)
+ if (level85 <= trip_level85[x85])
+ break;
+
+ for (x75 = 0; x75 < ARRAY_SIZE(trip_level75) - 1; x75++)
+ if (level75 <= trip_level75[x75])
+ break;
+
+ val = FIELD_PREP(ISL12022_REG_VB85_MASK, x85) | FIELD_PREP(ISL12022_REG_VB75_MASK, x75);
+ mask = ISL12022_REG_VB85_MASK | ISL12022_REG_VB75_MASK;
+
+ ret = regmap_update_bits(regmap, ISL12022_REG_PWR_VBAT, mask, val);
+ if (ret)
+ dev_warn(dev, "unable to set battery alarm levels: %d\n", ret);
+}
+
static int isl12022_probe(struct i2c_client *client)
{
struct rtc_device *rtc;
@@ -225,6 +260,7 @@ static int isl12022_probe(struct i2c_client *client)
dev_set_drvdata(&client->dev, regmap);
+ isl12022_set_trip_levels(&client->dev);
isl12022_hwmon_register(&client->dev);
rtc = devm_rtc_allocate_device(&client->dev);
--
2.37.2
next prev parent reply other threads:[~2023-06-13 13:01 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-12 11:30 [PATCH 0/8] rtc: isl12022: battery backup voltage and clock support Rasmus Villemoes
2023-06-12 11:30 ` [PATCH 1/8] rtc: isl12022: remove wrong warning for low battery level Rasmus Villemoes
2023-06-12 11:30 ` [PATCH 2/8] dt-bindings: rtc: Move isil,isl12022 from trivial-rtc.yaml into own schema file Rasmus Villemoes
2023-06-12 12:26 ` Rob Herring
2023-06-12 12:36 ` Rasmus Villemoes
2023-06-12 13:54 ` Alexandre Belloni
2023-06-12 14:20 ` Rob Herring
2023-06-13 8:13 ` Rasmus Villemoes
2023-06-12 11:30 ` [PATCH 3/8] dt-bindings: rtc: isl12022: add bindings for battery alarm trip levels Rasmus Villemoes
2023-06-12 11:30 ` [PATCH 4/8] rtc: isl12022: add support for trip level DT bindings Rasmus Villemoes
2023-06-12 15:44 ` Andy Shevchenko
2023-06-12 18:10 ` kernel test robot
2023-06-12 18:58 ` kernel test robot
2023-06-12 11:30 ` [PATCH 5/8] rtc: isl12022: implement RTC_VL_READ and RTC_VL_CLR ioctls Rasmus Villemoes
2023-06-12 14:07 ` Alexandre Belloni
2023-06-13 7:27 ` Rasmus Villemoes
2023-06-12 15:48 ` Andy Shevchenko
2023-06-12 16:10 ` Alexandre Belloni
2023-06-13 7:53 ` Rasmus Villemoes
2023-06-13 9:00 ` Alexandre Belloni
2023-06-12 11:30 ` [PATCH 6/8] rtc: isl12022: trigger battery level detection during probe Rasmus Villemoes
2023-06-12 12:30 ` Rasmus Villemoes
2023-06-12 14:17 ` Alexandre Belloni
2023-06-13 7:51 ` Rasmus Villemoes
2023-06-12 14:15 ` Alexandre Belloni
2023-06-13 7:44 ` Rasmus Villemoes
2023-06-13 8:58 ` Alexandre Belloni
2023-06-12 11:30 ` [PATCH 7/8] dt-bindings: rtc: isl12022: add #clock-cells property Rasmus Villemoes
2023-06-13 7:41 ` Krzysztof Kozlowski
2023-06-12 11:30 ` [PATCH 8/8] rtc: isl12022: implement support for the #clock-cells DT property Rasmus Villemoes
2023-06-13 13:00 ` [PATCH v2 0/8] rtc: isl12022: battery backup voltage and clock support Rasmus Villemoes
2023-06-13 13:00 ` [PATCH v2 1/8] rtc: isl12022: remove wrong warning for low battery level Rasmus Villemoes
2023-06-13 13:00 ` [PATCH v2 2/8] dt-bindings: rtc: Move isil,isl12022 from trivial-rtc.yaml into own schema file Rasmus Villemoes
2023-06-13 19:06 ` Krzysztof Kozlowski
2023-06-13 13:00 ` [PATCH v2 3/8] dt-bindings: rtc: isl12022: add bindings for battery alarm trip levels Rasmus Villemoes
2023-06-13 19:09 ` Krzysztof Kozlowski
2023-06-13 19:51 ` Rasmus Villemoes
2023-06-13 21:37 ` Krzysztof Kozlowski
2023-06-13 13:00 ` Rasmus Villemoes [this message]
2023-06-13 13:00 ` [PATCH v2 5/8] rtc: isl12022: implement RTC_VL_READ ioctl Rasmus Villemoes
2023-06-13 15:20 ` Andy Shevchenko
2023-06-13 21:26 ` Alexandre Belloni
2023-06-14 12:16 ` Andy Shevchenko
2023-06-14 13:50 ` Alexandre Belloni
2023-06-14 15:13 ` Andy Shevchenko
2023-06-15 10:53 ` Rasmus Villemoes
2023-06-15 10:58 ` Andy Shevchenko
2023-06-13 13:00 ` [PATCH v2 6/8] rtc: isl12022: trigger battery level detection during probe Rasmus Villemoes
2023-06-13 13:00 ` [PATCH v2 7/8] dt-bindings: rtc: isl12022: add #clock-cells property Rasmus Villemoes
2023-06-13 19:10 ` Krzysztof Kozlowski
2023-06-13 20:25 ` Rasmus Villemoes
2023-06-13 21:38 ` Krzysztof Kozlowski
2023-06-13 13:00 ` [PATCH v2 8/8] rtc: isl12022: implement support for the #clock-cells DT property Rasmus Villemoes
2023-06-13 15:25 ` Andy Shevchenko
2023-06-14 10:51 ` Rasmus Villemoes
2023-06-14 12:13 ` Andy Shevchenko
2023-06-13 19:10 ` kernel test robot
2023-06-14 5:27 ` kernel test robot
2023-06-13 15:26 ` [PATCH v2 0/8] rtc: isl12022: battery backup voltage and clock support Andy Shevchenko
2023-06-13 19:06 ` Krzysztof Kozlowski
2023-06-15 11:03 ` Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 " Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 1/8] rtc: isl12022: remove wrong warning for low battery level Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 2/8] dt-bindings: rtc: Move isil,isl12022 from trivial-rtc.yaml into own schema file Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 3/8] dt-bindings: rtc: isl12022: add bindings for battery alarm trip levels Rasmus Villemoes
2023-06-17 8:12 ` Krzysztof Kozlowski
2023-06-15 10:58 ` [PATCH v3 4/8] rtc: isl12022: add support for trip level DT binding Rasmus Villemoes
2023-06-15 11:11 ` Andy Shevchenko
2023-06-19 7:27 ` Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 5/8] rtc: isl12022: implement RTC_VL_READ ioctl Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 6/8] rtc: isl12022: trigger battery level detection during probe Rasmus Villemoes
2023-06-15 10:58 ` [PATCH v3 7/8] dt-bindings: rtc: isl12022: add #clock-cells property Rasmus Villemoes
2023-06-17 8:13 ` Krzysztof Kozlowski
2023-06-15 10:58 ` [PATCH v3 8/8] rtc: isl12022: implement support for the #clock-cells DT property Rasmus Villemoes
2023-07-28 14:31 ` [PATCH v3 0/8] rtc: isl12022: battery backup voltage and clock support Rasmus Villemoes
2023-08-03 6:45 ` Rasmus Villemoes
2023-08-09 12:28 ` Rasmus Villemoes
2023-08-15 23:28 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230613130011.305589-5-linux@rasmusvillemoes.dk \
--to=linux@rasmusvillemoes.dk \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).